JUNIPER-MIMSTP-MIB

File: JUNIPER-MIMSTP-MIB.mib (83620 bytes)

Imported modules

Imported symbols

OBJECT-TYPE	MODULE-IDENTITY	Integer32
enterprises	Counter32	TimeTicks
NOTIFICATION-TYPE	RowStatus	TEXTUAL-CONVENTION
MacAddress	TruthValue	jnxXstpMibs

Defined Types

VlanId
A 12-bit VLAN ID used in the VLAN Tag header.
TEXTUAL-CONVENTION
	Integer32	1..4094

BridgeId
Identifier of Bridge in 8 byte format
TEXTUAL-CONVENTION
	OCTET STRING	Size(8)

Timeout
Time out value in 4 byte
TEXTUAL-CONVENTION
	Integer32

EnabledStatus
A simple status value for the object.
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2)

JnxMIDot1sJuniperMstEntry
SEQUENCE
	jnxMIDot1sJuniperMstContextId	Integer32
	jnxMIMstSystemControl	INTEGER
	jnxMIMstModuleStatus	EnabledStatus
	jnxMIMstMaxMstInstanceNumber	Integer32
	jnxMIMstNoOfMstiSupported	Integer32
	jnxMIMstMaxHopCount	Integer32
	jnxMIMstBrgAddress	MacAddress
	jnxMIMstCistRoot	BridgeId
	jnxMIMstCistRegionalRoot	BridgeId
	jnxMIMstCistRootCost	Integer32
	jnxMIMstCistRegionalRootCost	Integer32
	jnxMIMstCistRootPort	Integer32
	jnxMIMstCistBridgePriority	Integer32
	jnxMIMstCistBridgeMaxAge	Timeout
	jnxMIMstCistBridgeForwardDelay	Timeout
	jnxMIMstCistHoldTime	Integer32
	jnxMIMstCistMaxAge	Timeout
	jnxMIMstCistForwardDelay	Timeout
	jnxMIMstMstpUpCount	Counter32
	jnxMIMstMstpDownCount	Counter32
	jnxMIMstPathCostDefaultType	INTEGER
	jnxMIMstTrace	Integer32
	jnxMIMstDebug	Integer32
	jnxMIMstForceProtocolVersion	INTEGER
	jnxMIMstTxHoldCount	INTEGER
	jnxMIMstMstiConfigIdSel	Integer32
	jnxMIMstMstiRegionName	OCTET STRING
	jnxMIMstMstiRegionVersion	Integer32
	jnxMIMstMstiConfigDigest	OCTET STRING
	jnxMIMstBufferOverFlowCount	Counter32
	jnxMIMstMemAllocFailureCount	Counter32
	jnxMIMstRegionConfigChangeCount	Counter32
	jnxMIMstCistBridgeRoleSelectionSemState	INTEGER
	jnxMIMstCistTimeSinceTopologyChange	TimeTicks
	jnxMIMstCistTopChanges	Counter32
	jnxMIMstCistNewRootBridgeCount	Counter32
	jnxMIMstCistHelloTime	Timeout
	jnxMIMstCistBridgeHelloTime	Timeout
	jnxMIMstCistDynamicPathcostCalculation	TruthValue

JnxMIMstMstiBridgeEntry
SEQUENCE
	jnxMIMstMstiInstanceIndex	Integer32
	jnxMIMstMstiBridgeRegionalRoot	BridgeId
	jnxMIMstMstiBridgePriority	Integer32
	jnxMIMstMstiRootCost	Integer32
	jnxMIMstMstiRootPort	Integer32
	jnxMIMstMstiTimeSinceTopologyChange	TimeTicks
	jnxMIMstMstiTopChanges	Counter32
	jnxMIMstMstiNewRootBridgeCount	Counter32
	jnxMIMstMstiBridgeRoleSelectionSemState	INTEGER
	jnxMIMstInstanceUpCount	Counter32
	jnxMIMstInstanceDownCount	Counter32
	jnxMIMstOldDesignatedRoot	BridgeId

JnxMIMstVlanInstanceMappingEntry
SEQUENCE
	jnxMIMstInstanceIndex	Integer32
	jnxMIMstMapVlanIndex	VlanId
	jnxMIMstUnMapVlanIndex	VlanId
	jnxMIMstSetVlanList	OCTET STRING
	jnxMIMstResetVlanList	OCTET STRING
	jnxMIMstInstanceVlanMapped	OCTET STRING
	jnxMIMstInstanceVlanMapped2k	OCTET STRING
	jnxMIMstInstanceVlanMapped3k	OCTET STRING
	jnxMIMstInstanceVlanMapped4k	OCTET STRING

JnxMIMstCistPortEntry
SEQUENCE
	jnxMIMstCistPort	Integer32
	jnxMIMstCistPortPathCost	Integer32
	jnxMIMstCistPortPriority	Integer32
	jnxMIMstCistPortDesignatedRoot	BridgeId
	jnxMIMstCistPortDesignatedBridge	BridgeId
	jnxMIMstCistPortDesignatedPort	OCTET STRING
	jnxMIMstCistPortAdminP2P	INTEGER
	jnxMIMstCistPortOperP2P	TruthValue
	jnxMIMstCistPortAdminEdgeStatus	TruthValue
	jnxMIMstCistPortOperEdgeStatus	TruthValue
	jnxMIMstCistPortProtocolMigration	TruthValue
	jnxMIMstCistPortState	INTEGER
	jnxMIMstCistForcePortState	INTEGER
	jnxMIMstCistPortForwardTransitions	Counter32
	jnxMIMstCistPortRxMstBpduCount	Counter32
	jnxMIMstCistPortRxRstBpduCount	Counter32
	jnxMIMstCistPortRxConfigBpduCount	Counter32
	jnxMIMstCistPortRxTcnBpduCount	Counter32
	jnxMIMstCistPortTxMstBpduCount	Counter32
	jnxMIMstCistPortTxRstBpduCount	Counter32
	jnxMIMstCistPortTxConfigBpduCount	Counter32
	jnxMIMstCistPortTxTcnBpduCount	Counter32
	jnxMIMstCistPortInvalidMstBpduRxCount	Counter32
	jnxMIMstCistPortInvalidRstBpduRxCount	Counter32
	jnxMIMstCistPortInvalidConfigBpduRxCount	Counter32
	jnxMIMstCistPortInvalidTcnBpduRxCount	Counter32
	jnxMIMstCistPortTransmitSemState	INTEGER
	jnxMIMstCistPortReceiveSemState	INTEGER
	jnxMIMstCistPortProtMigrationSemState	INTEGER
	jnxMIMstCistProtocolMigrationCount	Counter32
	jnxMIMstCistPortDesignatedCost	Integer32
	jnxMIMstCistPortRegionalRoot	BridgeId
	jnxMIMstCistPortRegionalPathCost	Integer32
	jnxMIMstCistSelectedPortRole	INTEGER
	jnxMIMstCistCurrentPortRole	INTEGER
	jnxMIMstCistPortInfoSemState	INTEGER
	jnxMIMstCistPortRoleTransitionSemState	INTEGER
	jnxMIMstCistPortStateTransitionSemState	INTEGER
	jnxMIMstCistPortTopologyChangeSemState	INTEGER
	jnxMIMstCistPortHelloTime	Timeout
	jnxMIMstCistPortOperVersion	INTEGER
	jnxMIMstCistPortEffectivePortState	TruthValue
	jnxMIMstCistPortAutoEdgeStatus	TruthValue

JnxMIMstMstiPortEntry
SEQUENCE
	jnxMIMstMstiPort	Integer32
	jnxMIMstMstiPortPathCost	Integer32
	jnxMIMstMstiPortPriority	Integer32
	jnxMIMstMstiPortDesignatedRoot	BridgeId
	jnxMIMstMstiPortDesignatedBridge	BridgeId
	jnxMIMstMstiPortDesignatedPort	OCTET STRING
	jnxMIMstMstiPortState	INTEGER
	jnxMIMstMstiForcePortState	INTEGER
	jnxMIMstMstiPortForwardTransitions	Counter32
	jnxMIMstMstiPortReceivedBPDUs	Counter32
	jnxMIMstMstiPortTransmittedBPDUs	Counter32
	jnxMIMstMstiPortInvalidBPDUsRcvd	Counter32
	jnxMIMstMstiPortDesignatedCost	Integer32
	jnxMIMstMstiSelectedPortRole	INTEGER
	jnxMIMstMstiCurrentPortRole	INTEGER
	jnxMIMstMstiPortInfoSemState	INTEGER
	jnxMIMstMstiPortRoleTransitionSemState	INTEGER
	jnxMIMstMstiPortStateTransitionSemState	INTEGER
	jnxMIMstMstiPortTopologyChangeSemState	INTEGER
	jnxMIMstMstiPortEffectivePortState	TruthValue

JnxMIMstCistPortProtectEntry
SEQUENCE
	jnxMIMstCistPortRootProtectEnabled	TruthValue
	jnxMIMstCistPortRootProtectState	INTEGER
	jnxMIMstCistPortLoopProtectEnabled	TruthValue
	jnxMIMstCistPortLoopProtectState	INTEGER

JnxMIMstMstiPortProtectEntry
SEQUENCE
	jnxMIMstMstiPortRootProtectState	INTEGER
	jnxMIMstMstiPortLoopProtectState	INTEGER

JnxMIDot1sJnxMstTrapsControlEntry
SEQUENCE
	jnxMIMstSetTraps	Integer32
	jnxMIMstGenTrapType	INTEGER

JnxMIMstPortTrapNotificationEntry
SEQUENCE
	jnxMIMstPortTrapIndex	Integer32
	jnxMIMstPortMigrationType	INTEGER
	jnxMIMstPktErrType	INTEGER
	jnxMIMstPktErrVal	INTEGER

Defined Values

jnxMIMstMIB		1.3.6.1.4.1.2636.3.46.1
This mib module is for Juniper Networks Proprietory Multiple Instance MSTP mib
MODULE-IDENTITY

jnxMIDot1sJuniperMst		1.3.6.1.4.1.2636.3.46.1.1
OBJECT IDENTIFIER

jnxMIDot1sJnxMstTrapsControl		1.3.6.1.4.1.2636.3.46.1.2
OBJECT IDENTIFIER

jnxMIDot1sJuniperMstTraps		1.3.6.1.4.1.2636.3.46.1.3
OBJECT IDENTIFIER

jnxMIMstGlobalTrace		1.3.6.1.4.1.2636.3.46.1.1.1
This object is used to enable Global Trace Statements in the MSTP Module.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstGlobalDebug		1.3.6.1.4.1.2636.3.46.1.1.2
This object is used to enable Global Debug Statements in the MSTP Module.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIDot1sJuniperMstTable		1.3.6.1.4.1.2636.3.46.1.1.3
List of per Virtual Context Mst Module Parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIDot1sJuniperMstEntry

jnxMIDot1sJuniperMstEntry		1.3.6.1.4.1.2636.3.46.1.1.3.1
Virtual Context Mst Module Parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIDot1sJuniperMstEntry

jnxMIDot1sJuniperMstContextId		1.3.6.1.4.1.2636.3.46.1.1.3.1.1
Identifies the Virtual Context.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

jnxMIMstSystemControl		1.3.6.1.4.1.2636.3.46.1.1.3.1.2
The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. All memory should be released on all ports.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	start(1), shutdown(2)

jnxMIMstModuleStatus		1.3.6.1.4.1.2636.3.46.1.1.3.1.3
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, jnxMIMstSystemControl set to start.
Status: current	Access: read-only
OBJECT-TYPE
	EnabledStatus

jnxMIMstMaxMstInstanceNumber		1.3.6.1.4.1.2636.3.46.1.1.3.1.4
The Maximun number of spanning trees to be allowed. A User may limit the Number of Spanning Tree instance to be allowed in the Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..64

jnxMIMstNoOfMstiSupported		1.3.6.1.4.1.2636.3.46.1.1.3.1.5
Indicates Maximum number of spanning tree Instances supported.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstMaxHopCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.6
Indicates the Maximum Hop Count value. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	600..4000

jnxMIMstBrgAddress		1.3.6.1.4.1.2636.3.46.1.1.3.1.7
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with jnxMIMstCistBridgePriority or jnxMIMstMstiBridgePriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

jnxMIMstCistRoot		1.3.6.1.4.1.2636.3.46.1.1.3.1.8
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstCistRegionalRoot		1.3.6.1.4.1.2636.3.46.1.1.3.1.9
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstCistRootCost		1.3.6.1.4.1.2636.3.46.1.1.3.1.10
The Cost of the path to the CIST Root as seen from this bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistRegionalRootCost		1.3.6.1.4.1.2636.3.46.1.1.3.1.11
The Cost of the path to the CIST Regional Root as seen from this bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistRootPort		1.3.6.1.4.1.2636.3.46.1.1.3.1.12
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistBridgePriority		1.3.6.1.4.1.2636.3.46.1.1.3.1.13
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..61440

jnxMIMstCistBridgeMaxAge		1.3.6.1.4.1.2636.3.46.1.1.3.1.14
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout	600..4000

jnxMIMstCistBridgeForwardDelay		1.3.6.1.4.1.2636.3.46.1.1.3.1.15
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout	400..3000

jnxMIMstCistHoldTime		1.3.6.1.4.1.2636.3.46.1.1.3.1.16
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistMaxAge		1.3.6.1.4.1.2636.3.46.1.1.3.1.17
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout

jnxMIMstCistForwardDelay		1.3.6.1.4.1.2636.3.46.1.1.3.1.18
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout

jnxMIMstMstpUpCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.19
The number of times MSTP Module has been enabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstpDownCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.20
The number of times MSTP Module has been disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstPathCostDefaultType		1.3.6.1.4.1.2636.3.46.1.1.3.1.21
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stp8021d1998(1), stp8021t2001(2)

jnxMIMstTrace		1.3.6.1.4.1.2636.3.46.1.1.3.1.22
This object is used to enable Trace Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of trace levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Trace Option to any value will cause the Debug Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

jnxMIMstDebug		1.3.6.1.4.1.2636.3.46.1.1.3.1.23
This object is used to enable Debug Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the level of debug is as follows: 0 - Init and Shutdown Debug statements 1 - Management Debug statements 2 - Memory related Debug statements 3 - BPDU related Debug statements 4 - Event Handling Debug statements 5 - Timer Module Debug statements 6 - Port Information SEM Debug statements 7 - Port Receive SEM Debug statements (valid in the case of MSTP alone) 8 - Role Selection SEM Debug statements 9 - Role Transition SEM Debug statements 10 - State Transition SEM Debug statements 11 - Protocol Migration SEM Debug statements 12 - Topology Change SEM Debug statements 13 - Port Transmit SEM Debug statements 14 - Bridge Detection SEM Debug statements 15 - All Failure Debug statements 16 - Redundancy code flow Debug statements The remaining bits are unused. Combination of debug levels are also allowed. For example if the bits 0 and 1 are set, then the Debug statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set then user has to give the value for this object as 3. Setting the Debug Option to any value will cause the Trace Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..131071

jnxMIMstForceProtocolVersion		1.3.6.1.4.1.2636.3.46.1.1.3.1.24
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp(3)' indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stpCompatible(0), rstp(2), mstp(3)

jnxMIMstTxHoldCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.25
The value used by the Port Transmit state machine to limit the maximum transmission rate.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

jnxMIMstMstiConfigIdSel		1.3.6.1.4.1.2636.3.46.1.1.3.1.26
The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

jnxMIMstMstiRegionName		1.3.6.1.4.1.2636.3.46.1.1.3.1.27
The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

jnxMIMstMstiRegionVersion		1.3.6.1.4.1.2636.3.46.1.1.3.1.28
Version of the MST Region.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxMIMstMstiConfigDigest		1.3.6.1.4.1.2636.3.46.1.1.3.1.29
The Configuration Digest value for this Region.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

jnxMIMstBufferOverFlowCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.30
The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMemAllocFailureCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.31
The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstRegionConfigChangeCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.32
The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistBridgeRoleSelectionSemState		1.3.6.1.4.1.2636.3.46.1.1.3.1.33
Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	initbridge(0), roleselection(1)

jnxMIMstCistTimeSinceTopologyChange		1.3.6.1.4.1.2636.3.46.1.1.3.1.34
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxMIMstCistTopChanges		1.3.6.1.4.1.2636.3.46.1.1.3.1.35
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistNewRootBridgeCount		1.3.6.1.4.1.2636.3.46.1.1.3.1.36
The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistHelloTime		1.3.6.1.4.1.2636.3.46.1.1.3.1.37
This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout

jnxMIMstCistBridgeHelloTime		1.3.6.1.4.1.2636.3.46.1.1.3.1.38
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout	100..1000

jnxMIMstCistDynamicPathcostCalculation		1.3.6.1.4.1.2636.3.46.1.1.3.1.39
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is used for calculating the path cost. In both cases if the user has configured a pathcost for the port that will be used. By default dynamic pathcost calculation is set to false.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstMstiBridgeTable		1.3.6.1.4.1.2636.3.46.1.1.4
Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstMstiBridgeEntry

jnxMIMstMstiBridgeEntry		1.3.6.1.4.1.2636.3.46.1.1.4.1
Entry indicating the Bridge Information.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstMstiBridgeEntry

jnxMIMstMstiInstanceIndex		1.3.6.1.4.1.2636.3.46.1.1.4.1.1
Spanning Tree Instance to which the information belongs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..64

jnxMIMstMstiBridgeRegionalRoot		1.3.6.1.4.1.2636.3.46.1.1.4.1.2
MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstMstiBridgePriority		1.3.6.1.4.1.2636.3.46.1.1.4.1.3
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..61440

jnxMIMstMstiRootCost		1.3.6.1.4.1.2636.3.46.1.1.4.1.4
The Cost of the path to the MSTI Regional Root as seen by this bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstMstiRootPort		1.3.6.1.4.1.2636.3.46.1.1.4.1.5
The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstMstiTimeSinceTopologyChange		1.3.6.1.4.1.2636.3.46.1.1.4.1.6
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxMIMstMstiTopChanges		1.3.6.1.4.1.2636.3.46.1.1.4.1.7
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiNewRootBridgeCount		1.3.6.1.4.1.2636.3.46.1.1.4.1.8
The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiBridgeRoleSelectionSemState		1.3.6.1.4.1.2636.3.46.1.1.4.1.9
Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	initbridge(0), roleselection(1)

jnxMIMstInstanceUpCount		1.3.6.1.4.1.2636.3.46.1.1.4.1.10
The number of times a new spanning tree instance has been created. This counter is incremented whenever a new spanning tree instance is created and also whenever a vlan is mapped to the instance. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstInstanceDownCount		1.3.6.1.4.1.2636.3.46.1.1.4.1.11
The number of times a spanning tree instance has been deleted. This counter is incremented whenever a spanning tree instance is deleted and also whenever a vlan is unmapped from the instance. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstOldDesignatedRoot		1.3.6.1.4.1.2636.3.46.1.1.4.1.12
The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstVlanInstanceMappingTable		1.3.6.1.4.1.2636.3.46.1.1.5
This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstVlanInstanceMappingEntry

jnxMIMstVlanInstanceMappingEntry		1.3.6.1.4.1.2636.3.46.1.1.5.1
A conceptual row containing the status of the MSTP instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstVlanInstanceMappingEntry

jnxMIMstInstanceIndex		1.3.6.1.4.1.2636.3.46.1.1.5.1.1
An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..64

jnxMIMstMapVlanIndex		1.3.6.1.4.1.2636.3.46.1.1.5.1.2
The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

jnxMIMstUnMapVlanIndex		1.3.6.1.4.1.2636.3.46.1.1.5.1.3
The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values.
Status: current	Access: read-only
OBJECT-TYPE
	VlanId

jnxMIMstSetVlanList		1.3.6.1.4.1.2636.3.46.1.1.5.1.4
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

jnxMIMstResetVlanList		1.3.6.1.4.1.2636.3.46.1.1.5.1.5
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

jnxMIMstInstanceVlanMapped		1.3.6.1.4.1.2636.3.46.1.1.5.1.6
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

jnxMIMstInstanceVlanMapped2k		1.3.6.1.4.1.2636.3.46.1.1.5.1.7
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

jnxMIMstInstanceVlanMapped3k		1.3.6.1.4.1.2636.3.46.1.1.5.1.8
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

jnxMIMstInstanceVlanMapped4k		1.3.6.1.4.1.2636.3.46.1.1.5.1.9
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..128)

jnxMIMstCistPortTable		1.3.6.1.4.1.2636.3.46.1.1.6
This table contains Common Spanning Tree Port Information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstCistPortEntry

jnxMIMstCistPortEntry		1.3.6.1.4.1.2636.3.46.1.1.6.1
A list of information maintained by every port for Common Spanning tree.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstCistPortEntry

jnxMIMstCistPort		1.3.6.1.4.1.2636.3.46.1.1.6.1.1
The Port number of the port for which this entry contains spanning tree information.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

jnxMIMstCistPortPathCost		1.3.6.1.4.1.2636.3.46.1.1.6.1.2
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..200000000

jnxMIMstCistPortPriority		1.3.6.1.4.1.2636.3.46.1.1.6.1.3
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..240

jnxMIMstCistPortDesignatedRoot		1.3.6.1.4.1.2636.3.46.1.1.6.1.4
The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstCistPortDesignatedBridge		1.3.6.1.4.1.2636.3.46.1.1.6.1.5
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstCistPortDesignatedPort		1.3.6.1.4.1.2636.3.46.1.1.6.1.6
The Port identifier of the port on the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

jnxMIMstCistPortAdminP2P		1.3.6.1.4.1.2636.3.46.1.1.6.1.7
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	forceTrue(0), forceFalse(1), auto(2)

jnxMIMstCistPortOperP2P		1.3.6.1.4.1.2636.3.46.1.1.6.1.8
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the jnxMIMstCistPortAdminP2P object.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortAdminEdgeStatus		1.3.6.1.4.1.2636.3.46.1.1.6.1.9
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortOperEdgeStatus		1.3.6.1.4.1.2636.3.46.1.1.6.1.10
The operational value of the Edge Port parameter. The object is initialized to the value of jnxMIMstCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortProtocolMigration		1.3.6.1.4.1.2636.3.46.1.1.6.1.11
Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and it always returns FALSE(2) when read.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortState		1.3.6.1.4.1.2636.3.46.1.1.6.1.12
Current state of the Port as defined by the Common spanning tree protocol.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), discarding(2), learning(4), forwarding(5)

jnxMIMstCistForcePortState		1.3.6.1.4.1.2636.3.46.1.1.6.1.13
Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

jnxMIMstCistPortForwardTransitions		1.3.6.1.4.1.2636.3.46.1.1.6.1.14
Number of times this port has transitioned to the Forwarding State.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortRxMstBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.15
Number of MST BPDUs received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortRxRstBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.16
Number of RST BPDUs received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortRxConfigBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.17
Number of Configuration BPDUs received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortRxTcnBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.18
Number of TCN BPDUs received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortTxMstBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.19
Number of MST BPDUs Transmitted from this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortTxRstBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.20
Number of RST BPDUs Transmitted from this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortTxConfigBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.21
Number of Configuration BPDUs Transmitted from this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortTxTcnBpduCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.22
Number of TCN BPDUs Transmitted from this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortInvalidMstBpduRxCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.23
Number of Invalid MST BPDUs Received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortInvalidRstBpduRxCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.24
Number of Invalid RST BPDUs Received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortInvalidConfigBpduRxCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.25
Number of Invalid Configuration BPDUs Received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortInvalidTcnBpduRxCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.26
Number of Invalid TCN BPDUs Received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortTransmitSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.27
Indicates current State of the Port Transmit state machine.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	transmitinit(0), transmitperiodic(1), transmitconfig(2), transmittcn(3), transmitrstp(4), idle(5)

jnxMIMstCistPortReceiveSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.28
Indicates current State of the Port Receive state machine.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	discard(0), receive(1)

jnxMIMstCistPortProtMigrationSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.29
Indicates current State of the Port Protocol Migration State machine.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(0), sendrstp(1), sendingrstp(2), sendstp(3), sendingstp(4)

jnxMIMstCistProtocolMigrationCount		1.3.6.1.4.1.2636.3.46.1.1.6.1.30
The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generated on the occurence of this event.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstCistPortDesignatedCost		1.3.6.1.4.1.2636.3.46.1.1.6.1.31
The path cost of the Designated Port of the segment connected to this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistPortRegionalRoot		1.3.6.1.4.1.2636.3.46.1.1.6.1.32
The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstCistPortRegionalPathCost		1.3.6.1.4.1.2636.3.46.1.1.6.1.33
The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstCistSelectedPortRole		1.3.6.1.4.1.2636.3.46.1.1.6.1.34
Selected Port Role of the port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), alternate(1), backup(2), root(3), designated(4)

jnxMIMstCistCurrentPortRole		1.3.6.1.4.1.2636.3.46.1.1.6.1.35
Current Port Role of the port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), alternate(1), backup(2), root(3), designated(4)

jnxMIMstCistPortInfoSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.36
Current state of the Port Information State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1), aged(2), update(3), superiordesg(4), repeatdesg(5), root(6), other(7), present(8), receive(9)

jnxMIMstCistPortRoleTransitionSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.37
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(0), blockport(1), blockedport(2), activeport(3)

jnxMIMstCistPortStateTransitionSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.38
Current state of the Port State Transition State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	discarding(0), learning(1), forwarding(2)

jnxMIMstCistPortTopologyChangeSemState		1.3.6.1.4.1.2636.3.46.1.1.6.1.39
Current state of the Topology Change State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(0), inactive(1), active(2), detected(3), notifiedtcn(4), notifiedtc(5), propagating(6), acknowledged(7)

jnxMIMstCistPortHelloTime		1.3.6.1.4.1.2636.3.46.1.1.6.1.40
The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second.
Status: current	Access: read-only
OBJECT-TYPE
	Timeout	100..1000

jnxMIMstCistPortOperVersion		1.3.6.1.4.1.2636.3.46.1.1.6.1.41
This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stpCompatible(0), rstp(2), mstp(3)

jnxMIMstCistPortEffectivePortState		1.3.6.1.4.1.2636.3.46.1.1.6.1.42
The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST. This is will be set to False for all other times.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortAutoEdgeStatus		1.3.6.1.4.1.2636.3.46.1.1.6.1.43
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstMstiPortTable		1.3.6.1.4.1.2636.3.46.1.1.7
This table contains Spanning Tree Instance Specific Port Information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstMstiPortEntry

jnxMIMstMstiPortEntry		1.3.6.1.4.1.2636.3.46.1.1.7.1
A list of information maintained by every port for each and every spanning tree instance.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstMstiPortEntry

jnxMIMstMstiPort		1.3.6.1.4.1.2636.3.46.1.1.7.1.1
The Port number of the port for which this entry contains spanning tree information.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

jnxMIMstMstiPortPathCost		1.3.6.1.4.1.2636.3.46.1.1.7.1.2
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..200000000

jnxMIMstMstiPortPriority		1.3.6.1.4.1.2636.3.46.1.1.7.1.3
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..240

jnxMIMstMstiPortDesignatedRoot		1.3.6.1.4.1.2636.3.46.1.1.7.1.4
The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstMstiPortDesignatedBridge		1.3.6.1.4.1.2636.3.46.1.1.7.1.5
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

jnxMIMstMstiPortDesignatedPort		1.3.6.1.4.1.2636.3.46.1.1.7.1.6
The Port identifier of the port on the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

jnxMIMstMstiPortState		1.3.6.1.4.1.2636.3.46.1.1.7.1.7
Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), discarding(2), learning(4), forwarding(5)

jnxMIMstMstiForcePortState		1.3.6.1.4.1.2636.3.46.1.1.7.1.8
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'jnxMIMstCistForcePortState' is set to 'enabled' for this port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

jnxMIMstMstiPortForwardTransitions		1.3.6.1.4.1.2636.3.46.1.1.7.1.9
Number of times this port has transitioned to the Forwarding State for specific instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiPortReceivedBPDUs		1.3.6.1.4.1.2636.3.46.1.1.7.1.10
Number of BPDUs received by this port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiPortTransmittedBPDUs		1.3.6.1.4.1.2636.3.46.1.1.7.1.11
Number of BPDUs transmitted on this port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiPortInvalidBPDUsRcvd		1.3.6.1.4.1.2636.3.46.1.1.7.1.12
Number of Invalid BPDUs received on this Port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxMIMstMstiPortDesignatedCost		1.3.6.1.4.1.2636.3.46.1.1.7.1.13
The path cost of the Designated Port of the segment connected to this port.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxMIMstMstiSelectedPortRole		1.3.6.1.4.1.2636.3.46.1.1.7.1.14
Selected Port Role of the port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), alternate(1), backup(2), root(3), designated(4), master(5)

jnxMIMstMstiCurrentPortRole		1.3.6.1.4.1.2636.3.46.1.1.7.1.15
Current Port Role of the port for this spanning tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), alternate(1), backup(2), root(3), designated(4), master(5)

jnxMIMstMstiPortInfoSemState		1.3.6.1.4.1.2636.3.46.1.1.7.1.16
Current state of the Port Information State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1), aged(2), update(3), superiordesg(4), repeatdesg(5), root(6), other(7), present(8), receive(9)

jnxMIMstMstiPortRoleTransitionSemState		1.3.6.1.4.1.2636.3.46.1.1.7.1.17
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(0), blockport(1), blockedport(2), activeport(3)

jnxMIMstMstiPortStateTransitionSemState		1.3.6.1.4.1.2636.3.46.1.1.7.1.18
Current state of the Port State Transition State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	discarding(0), learning(1), forwarding(2)

jnxMIMstMstiPortTopologyChangeSemState		1.3.6.1.4.1.2636.3.46.1.1.7.1.19
Current state of the Topology Change State Machine for this port in this spanning tree context.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(0), inactive(1), active(2), detected(3), notifiedtcn(4), notifiedtc(5), propagating(6), acknowledged(7)

jnxMIMstMstiPortEffectivePortState		1.3.6.1.4.1.2636.3.46.1.1.7.1.20
The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protocol level for the specific instance. This is will be set to false at all other times.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortProtectTable		1.3.6.1.4.1.2636.3.46.1.1.8
Defines the jnxMIMstCist Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstCistPortTable entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstCistPortProtectEntry

jnxMIMstCistPortProtectEntry		1.3.6.1.4.1.2636.3.46.1.1.8.1
Defines an entry in the jnxMIMstCistPortProtectTable. This essentially augments the jnxMIMstCistPortEntry with additional objects.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstCistPortProtectEntry

jnxMIMstCistPortRootProtectEnabled		1.3.6.1.4.1.2636.3.46.1.1.8.1.1
A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. This parameter should be FALSE by default.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortRootProtectState		1.3.6.1.4.1.2636.3.46.1.1.8.1.2
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no-error(0), root-prevented(1)

jnxMIMstCistPortLoopProtectEnabled		1.3.6.1.4.1.2636.3.46.1.1.8.1.3
A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port for the CIST or any MSTI, when the received superior BPDU is aged out. This parameter should be FALSE by default.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

jnxMIMstCistPortLoopProtectState		1.3.6.1.4.1.2636.3.46.1.1.8.1.4
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no-error(0), loop-prevented(1)

jnxMIMstMstiPortProtectTable		1.3.6.1.4.1.2636.3.46.1.1.9
Defines the jnxMIMstMsti Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstMstiPortTable entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstMstiPortProtectEntry

jnxMIMstMstiPortProtectEntry		1.3.6.1.4.1.2636.3.46.1.1.9.1
Defines an entry in the jnxMIMstMstiPortProtectTable. This essentially augments the jnxMIMstMstiPortEntry with additional objects.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstMstiPortProtectEntry

jnxMIMstMstiPortRootProtectState		1.3.6.1.4.1.2636.3.46.1.1.9.1.1
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no-error(0), root-prevented(1)

jnxMIMstMstiPortLoopProtectState		1.3.6.1.4.1.2636.3.46.1.1.9.1.2
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no-error(0), loop-prevented(1)

jnxMIDot1sJnxMstSetGlobalTrapOption		1.3.6.1.4.1.2636.3.46.1.2.1
This object is used to enable and disable MSTP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..1

jnxMIMstGlobalErrTrapType		1.3.6.1.4.1.2636.3.46.1.2.2
Used within the Trap Notification PDU. It denotes general events like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), memfail(1), bufffail(2)

jnxMIDot1sJnxMstTrapsControlTable		1.3.6.1.4.1.2636.3.46.1.2.3
List of per virtual bridge Trap Control Info.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIDot1sJnxMstTrapsControlEntry

jnxMIDot1sJnxMstTrapsControlEntry		1.3.6.1.4.1.2636.3.46.1.2.3.1
Virtual bridge TrapsControl information.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIDot1sJnxMstTrapsControlEntry

jnxMIMstSetTraps		1.3.6.1.4.1.2636.3.46.1.2.3.1.1
This object is used to enable and disable context-specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like port protocol migration or invalid packet rcvd in port 3 - All the above Traps
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..3

jnxMIMstGenTrapType		1.3.6.1.4.1.2636.3.46.1.2.3.1.2
Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), up(1), down(2)

jnxMIMstPortTrapNotificationTable		1.3.6.1.4.1.2636.3.46.1.2.4
This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintained per virtual context in the system.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxMIMstPortTrapNotificationEntry

jnxMIMstPortTrapNotificationEntry		1.3.6.1.4.1.2636.3.46.1.2.4.1
This entry is used to store the notification information
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxMIMstPortTrapNotificationEntry

jnxMIMstPortTrapIndex		1.3.6.1.4.1.2636.3.46.1.2.4.1.1
A unique value, greater than zero, indicating the Port number.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4096

jnxMIMstPortMigrationType		1.3.6.1.4.1.2636.3.46.1.2.4.1.2
Port Protocol migration type occured in the port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sendstp(0), sendrstp(1)

jnxMIMstPktErrType		1.3.6.1.4.1.2636.3.46.1.2.4.1.3
Type of invalid packet received in each of the port
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	protocolIdErr(0), invalidBpdu(1), configLengthErr(2), tcnLengthErr(3), rstpLengthErr(4), maxAgeErr(5), fwdDelayErr(6), helloTimeErr(7), mstpLengthErr(8)

jnxMIMstPktErrVal		1.3.6.1.4.1.2636.3.46.1.2.4.1.4
Packet error value corresponding to the above type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

jnxMIMstTraps		1.3.6.1.4.1.2636.3.46.1.3.0
OBJECT IDENTIFIER

jnxMIMstGenTrap		1.3.6.1.4.1.2636.3.46.1.3.0.1
Generated when any of the general events like protocol up or protocol down occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstErrTrap		1.3.6.1.4.1.2636.3.46.1.3.0.2
Generated when any of the error events like memory failure or buffer failure or protocol migration or new root or topology change occurs
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstNewRootTrap		1.3.6.1.4.1.2636.3.46.1.3.0.3
Generated whenever a new root bridge is selected in the topology. The jnxMIMstNewRootTrap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstTopologyChgTrap		1.3.6.1.4.1.2636.3.46.1.3.0.4
Generated when topology change is detected
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstProtocolMigrationTrap		1.3.6.1.4.1.2636.3.46.1.3.0.5
Generated when port protocol migration happens in the port
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstInvalidBpduRxdTrap		1.3.6.1.4.1.2636.3.46.1.3.0.6
Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstRegionConfigChangeTrap		1.3.6.1.4.1.2636.3.46.1.3.0.7
Generated when the MST region's configuration identifier changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstCistPortRootProtectStateChangeTrap		1.3.6.1.4.1.2636.3.46.1.3.0.8
Generated when the ports Root-protect state (no-error or root-prevented) for CIST changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstMstiPortRootProtectStateChangeTrap		1.3.6.1.4.1.2636.3.46.1.3.0.9
Generated when the ports Root-protect state (no-error or root-prevented) an MSTI changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstCistPortLoopProtectStateChangeTrap		1.3.6.1.4.1.2636.3.46.1.3.0.10
Generated when the ports Loop-protect state (no-error or loop-prevented) for CIST changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

jnxMIMstMstiPortLoopProtectStateChangeTrap		1.3.6.1.4.1.2636.3.46.1.3.0.11
Generated when the ports Loop-protect state (no-error or loop-prevented) an MSTI changes.
Status: current	Access: read-only
NOTIFICATION-TYPE