JCImSeries-MIB

File: JCImSeries-MIB.mib (94451 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
JCIControlsGroup-MIB

Imported symbols

OBJECT-TYPE Integer32 NOTIFICATION-TYPE
MODULE-IDENTITY DisplayString ifIndex
mSeries

Defined Values

jcimSeriesMIB 1.3.6.1.4.1.4399.2.1.10.1
This MIB module describes all attributes included in traps created from Metasys OPC Event Data.
MODULE-IDENTITY    

opcTypes 1.3.6.1.4.1.4399.2.1.10.2
OBJECT IDENTIFIER    

opcTraps 1.3.6.1.4.1.4399.2.1.10.3
OBJECT IDENTIFIER    

opcN1Traps 1.3.6.1.4.1.4399.2.1.10.3.1
OBJECT IDENTIFIER    

opcBacnetTraps 1.3.6.1.4.1.4399.2.1.10.3.2
OBJECT IDENTIFIER    

opcStandardTraps 1.3.6.1.4.1.4399.2.1.10.3.3
OBJECT IDENTIFIER    

opcSeverity 1.3.6.1.4.1.4399.2.1.10.2.1
Indicates the severity of the OPCEvent represented by the trap where a values of 1-333 are low, 334-666 are medium and 667-1000 are high.
OBJECT-TYPE    
  INTEGER 0..1000  

opcSource 1.3.6.1.4.1.4399.2.1.10.2.2
The name of the device or system that has sent the event.
OBJECT-TYPE    
  DisplayString  

opcTimeStamp 1.3.6.1.4.1.4399.2.1.10.2.3
A string identifying the time the OPC-Event has occured. Note that the time is given as UTC-time.
OBJECT-TYPE    
  DisplayString  

opcMessage 1.3.6.1.4.1.4399.2.1.10.2.4
A string that contains further information about the event. Often this string is used to specify the action that the operator should take.
OBJECT-TYPE    
  DisplayString  

opcEventCategory 1.3.6.1.4.1.4399.2.1.10.2.5
Describes the category this event belongs, for example, Fire or General.
OBJECT-TYPE    
  DisplayString  

opcEventCategoryText 1.3.6.1.4.1.4399.2.1.10.2.6
Describes the category this event belongs, for example, Fire or General.
OBJECT-TYPE    
  DisplayString  

opcEventType 1.3.6.1.4.1.4399.2.1.10.2.7
Indicates the type of OPC-Event represented by the trap.
OBJECT-TYPE    
  INTEGER simpleEvent(1), trackingEvent(2), conditionEvent(4)  

opcEventTypeText 1.3.6.1.4.1.4399.2.1.10.2.8
The same as opcEventType except that it will return a humand readable text describing the type of the event. The possible event types are: Conditional, Simple or Tracking-Event.
OBJECT-TYPE    
  DisplayString  

opcCondition 1.3.6.1.4.1.4399.2.1.10.2.20
Indicates the condition type of the OPCEvent represented by the trap, for example, Alarm or Normal.
OBJECT-TYPE    
  DisplayString  

opcSubCondition 1.3.6.1.4.1.4399.2.1.10.2.21
Indicates the subcondition status of the OPCEvent represented by the trap, for example, a subcondition of an alarm is low alarm.
OBJECT-TYPE    
  DisplayString  

opcActiveTime 1.3.6.1.4.1.4399.2.1.10.2.22
Shows the UTC-time this event became active.
OBJECT-TYPE    
  DisplayString  

opcQuality 1.3.6.1.4.1.4399.2.1.10.2.23
The raw value of the OPC-quality according to the OPC DA specificatoin.
OBJECT-TYPE    
  INTEGER 0..255  

opcQualityText 1.3.6.1.4.1.4399.2.1.10.2.24
The same as opcQuality except that it contains a human readable text.
OBJECT-TYPE    
  DisplayString  

opcNewState 1.3.6.1.4.1.4399.2.1.10.2.25
Indicates the new state of the alarm.
OBJECT-TYPE    
  INTEGER opcConditionEnabled(1), opcConditionActive(2), opcConditionAcked(4)  

opcNewStateText 1.3.6.1.4.1.4399.2.1.10.2.26
Indicates the new state of the alarm.
OBJECT-TYPE    
  DisplayString  

opcAckRequired 1.3.6.1.4.1.4399.2.1.10.2.27
Indicates whether this alarm has to be acknowledged or not.
OBJECT-TYPE    
  INTEGER 0..1  

opcAckRequiredText 1.3.6.1.4.1.4399.2.1.10.2.28
Outputs ACKNOWLEDGE REQUIRED if integer value is 1.
OBJECT-TYPE    
  DisplayString  

opcCookie 1.3.6.1.4.1.4399.2.1.10.2.29
A unique ID for this event, normally for internal use only.
OBJECT-TYPE    
  Integer32  

opcChangeMask 1.3.6.1.4.1.4399.2.1.10.2.32
A set of bit flags indicating which properties of the alarm or event have changed: Bit 0 set = active state of the alarm. Bit 1 set = alarm has been acknowledged. Bit 2 set = alarm condition has been enabled or disabled. Bit 4 set = the quality of the data the alarm is based upon, has changed. Bit 5 set = the severity of the alarm has changed. Bit 6 set = the alarm has changed to another subcondition. Bit 7 set = the alarm message has changed. Bit 8 set = an attribute of the alarm has changed.
OBJECT-TYPE    
  INTEGER 0..512  

opcChangeMaskText 1.3.6.1.4.1.4399.2.1.10.2.30
A list of properties of the alarm or event have changed For example, the event has become inactive and acknowledged.
OBJECT-TYPE    
  DisplayString  

opcActorID 1.3.6.1.4.1.4399.2.1.10.2.31
For conditional events, this is the operator or software that has acknowledged the event. For tracking events, this is the actor ID.
OBJECT-TYPE    
  DisplayString  

originalDate 1.3.6.1.4.1.4399.2.1.10.2.40
Identifies the date of the original event.
OBJECT-TYPE    
  DisplayString  

originalTime 1.3.6.1.4.1.4399.2.1.10.2.41
Identifies the time of the original event.
OBJECT-TYPE    
  DisplayString  

networkName 1.3.6.1.4.1.4399.2.1.10.2.43
The Metasys network which is the source of the event, this string is also included in the OPCsource.
OBJECT-TYPE    
  DisplayString  

ncmName 1.3.6.1.4.1.4399.2.1.10.2.44
The Metasys network controller which is the source of the event, this string is also included in the OPCsource.
OBJECT-TYPE    
  DisplayString  

systemID 1.3.6.1.4.1.4399.2.1.10.2.45
The system which is the source of the event, this string is also included in the OPCsource.
OBJECT-TYPE    
  DisplayString  

id 1.3.6.1.4.1.4399.2.1.10.2.46
The object which is the source of the event, this string is also included in the OPCsource.
OBJECT-TYPE    
  DisplayString  

expandedID 1.3.6.1.4.1.4399.2.1.10.2.47
The long name of the object which is the source of the event.
OBJECT-TYPE    
  DisplayString  

presentvalue 1.3.6.1.4.1.4399.2.1.10.2.48
The value of the object when the event occurred.
OBJECT-TYPE    
  DisplayString  

units 1.3.6.1.4.1.4399.2.1.10.2.49
The engineering units asssigned to the object.
OBJECT-TYPE    
  DisplayString  

reportType 1.3.6.1.4.1.4399.2.1.10.2.50
The report type of the event, CRITICAL, STATUS or FOLLOWUP.
OBJECT-TYPE    
  DisplayString  

alarmType 1.3.6.1.4.1.4399.2.1.10.2.51
The report type of the event, CRITICAL, STATUS or FOLLOWUP.
OBJECT-TYPE    
  DisplayString  

availattribute1 1.3.6.1.4.1.4399.2.1.10.2.52
Available for future use.
OBJECT-TYPE    
  DisplayString  

alarmPriority 1.3.6.1.4.1.4399.2.1.10.2.53
The original Metasys Report severity (1-4)
OBJECT-TYPE    
  DisplayString  

featureStatus 1.3.6.1.4.1.4399.2.1.10.2.60
For feature related transactions, the name of the feature. For operator commands, the status of the object.
OBJECT-TYPE    
  DisplayString  

reportDate 1.3.6.1.4.1.4399.2.1.10.2.61
The date the transaction occurred.
OBJECT-TYPE    
  DisplayString  

reportTime 1.3.6.1.4.1.4399.2.1.10.2.62
The time the transaction occurred.
OBJECT-TYPE    
  DisplayString  

transactionType 1.3.6.1.4.1.4399.2.1.10.2.63
Transaction Type as an enumeration
OBJECT-TYPE    
  INTEGER logonLogoff(1), object(2), feature(3)  

transactionTypeText 1.3.6.1.4.1.4399.2.1.10.2.64
Transaction Type
OBJECT-TYPE    
  DisplayString  

location 1.3.6.1.4.1.4399.2.1.10.2.65
Location.
OBJECT-TYPE    
  DisplayString  

deviceName 1.3.6.1.4.1.4399.2.1.10.2.66
The name of the operator device where the transaction occurred.
OBJECT-TYPE    
  DisplayString  

userID 1.3.6.1.4.1.4399.2.1.10.2.67
The three character password ID of the operator who performed the transaction.
OBJECT-TYPE    
  DisplayString  

accssLevel 1.3.6.1.4.1.4399.2.1.10.2.68
For logon, the users access level. For logoff, 0. Otherwise, the access level required to perform the transaction.
OBJECT-TYPE    
  DisplayString  

transactionText 1.3.6.1.4.1.4399.2.1.10.2.69
A description of the transaction.
OBJECT-TYPE    
  DisplayString  

firstName 1.3.6.1.4.1.4399.2.1.10.2.70
First Name of the operator who performed a transaction.
OBJECT-TYPE    
  DisplayString  

lastName 1.3.6.1.4.1.4399.2.1.10.2.71
Last Name of the operator who performed a transaction.
OBJECT-TYPE    
  DisplayString  

spclText 1.3.6.1.4.1.4399.2.1.10.2.72
Information about the event.
OBJECT-TYPE    
  DisplayString  

cardNumber 1.3.6.1.4.1.4399.2.1.10.2.73
Card Number used in the transaction.
OBJECT-TYPE    
  DisplayString  

deviceTimePresent 1.3.6.1.4.1.4399.2.1.10.2.74
If true, the reported time is from the device.
OBJECT-TYPE    
  DisplayString  

esjAckComment 1.3.6.1.4.1.4399.2.1.10.2.75
A comment entered by the operator acknowledging the event.
OBJECT-TYPE    
  DisplayString  

propertyValue 1.3.6.1.4.1.4399.2.1.10.2.100
The current value of the attribute.
OBJECT-TYPE    
  DisplayString  

unit 1.3.6.1.4.1.4399.2.1.10.2.101
The unit of the value.
OBJECT-TYPE    
  DisplayString  

propertyName 1.3.6.1.4.1.4399.2.1.10.2.102
The name of the attribute.
OBJECT-TYPE    
  DisplayString  

fromState 1.3.6.1.4.1.4399.2.1.10.2.103
The previous state before the transition occurred.
OBJECT-TYPE    
  DisplayString  

vendorIdentifier 1.3.6.1.4.1.4399.2.1.10.2.104
The Bacnet Vendor Identifier number. 5 will be set for JC devices.
OBJECT-TYPE    
  DisplayString  

areas 1.3.6.1.4.1.4399.2.1.10.2.105
The Query Filter String.
OBJECT-TYPE    
  DisplayString  

bacnetEventType 1.3.6.1.4.1.4399.2.1.10.2.106
The Bacnet defined event type.
OBJECT-TYPE    
  DisplayString  

ackComment 1.3.6.1.4.1.4399.2.1.10.2.107
A comment entered by the operator acknowledging the event.
OBJECT-TYPE    
  DisplayString  

completeAcknowledge 1.3.6.1.4.1.4399.2.1.10.2.108
A indication of whether the controller needs complete acknowledgement.
OBJECT-TYPE    
  DisplayString  

badgeNumber 1.3.6.1.4.1.4399.2.1.10.2.109
The badge number of the badge holder.
OBJECT-TYPE    
  DisplayString  

badgeTrace 1.3.6.1.4.1.4399.2.1.10.2.110
Specifies if the card event set to be part of trace.
OBJECT-TYPE    
  DisplayString  

issueLevel 1.3.6.1.4.1.4399.2.1.10.2.111
The current issue of badge that created event.
OBJECT-TYPE    
  DisplayString  

timedOverride 1.3.6.1.4.1.4399.2.1.10.2.112
Timed Override
OBJECT-TYPE    
  DisplayString  

facilityCode 1.3.6.1.4.1.4399.2.1.10.2.113
The facility code of badge.
OBJECT-TYPE    
  DisplayString  

direction 1.3.6.1.4.1.4399.2.1.10.2.114
Enum=in,out,toggle,unknown,muster.
OBJECT-TYPE    
  DisplayString  

functionKey 1.3.6.1.4.1.4399.2.1.10.2.115
Function Key
OBJECT-TYPE    
  DisplayString  

barcodeAttach 1.3.6.1.4.1.4399.2.1.10.2.116
32 character string- NULL if N/A.
OBJECT-TYPE    
  DisplayString  

terminalName 1.3.6.1.4.1.4399.2.1.10.2.117
Terminal Name
OBJECT-TYPE    
  DisplayString  

userName 1.3.6.1.4.1.4399.2.1.10.2.118
User Name
OBJECT-TYPE    
  DisplayString  

auditItemName 1.3.6.1.4.1.4399.2.1.10.2.119
Audit Item Name
OBJECT-TYPE    
  DisplayString  

pegasysEventName 1.3.6.1.4.1.4399.2.1.10.2.120
Pegasys Event Name
OBJECT-TYPE    
  DisplayString  

errorLogType 1.3.6.1.4.1.4399.2.1.10.2.121
Error Log Type
OBJECT-TYPE    
  DisplayString  

triggerCode 1.3.6.1.4.1.4399.2.1.10.2.122
Trigger Code
OBJECT-TYPE    
  DisplayString  

triggerText 1.3.6.1.4.1.4399.2.1.10.2.123
Trigger Text
OBJECT-TYPE    
  DisplayString  

triggerValue 1.3.6.1.4.1.4399.2.1.10.2.124
Trigger Value
OBJECT-TYPE    
  DisplayString  

reliability 1.3.6.1.4.1.4399.2.1.10.2.125
Reliability
OBJECT-TYPE    
  DisplayString  

n1HvacActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.1
This trap is sent when a n1 HVAC conditional event becomes active.
NOTIFICATION-TYPE    

n1HvacInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.2
This trap is sent if when a n1 HVAC conditional event becomes inactive.
NOTIFICATION-TYPE    

n1HvacConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.3
This trap is sent when a n1 HVAC conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1FireActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.4
This trap is sent if when a n1 fire conditional event becomes active.
NOTIFICATION-TYPE    

n1FireInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.5
This trap is sent if when a n1 fire conditional event becomes inactive.
NOTIFICATION-TYPE    

n1FireConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.6
This trap is sent when a n1 fire conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1ServicesActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.7
This trap is sent if when a n1 services conditional event becomes active.
NOTIFICATION-TYPE    

n1ServicesInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.8
This trap is sent if when a n1 services conditional event becomes inactive.
NOTIFICATION-TYPE    

n1ServicesConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.9
This trap is sent when a n1 services conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1SecurityActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.10
This trap is sent if when a n1 security conditional event becomes active.
NOTIFICATION-TYPE    

n1SecurityInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.11
This trap is sent if when a n1 security conditional event becomes inactive.
NOTIFICATION-TYPE    

n1SecurityConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.12
This trap is sent when a n1 security conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1AdminActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.13
This trap is sent if when an n1 administrative conditional event becomes active.
NOTIFICATION-TYPE    

n1AdminInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.14
This trap is sent if when a n1 administrative conditional event becomes inactive.
NOTIFICATION-TYPE    

n1AdminConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.15
This trap is sent when a n1 administrative conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1GeneralActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.16
This trap is sent if when a n1 general conditional event becomes active.
NOTIFICATION-TYPE    

n1GeneralInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.17
This trap is sent when a n1 general conditional event becomes inactive.
NOTIFICATION-TYPE    

n1GeneralConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.1.0.18
This trap is sent when a n1 general conditional event is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

n1HvacSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.19
This is a n1 HVAC information trap.
NOTIFICATION-TYPE    

n1FireSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.20
This is a n1 fire information trap.
NOTIFICATION-TYPE    

n1ServicesSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.21
This is a n1 services information trap.
NOTIFICATION-TYPE    

n1SecuritySimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.22
This is a n1 security information trap.
NOTIFICATION-TYPE    

n1AdminSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.23
This is a n1 administrative information trap.
NOTIFICATION-TYPE    

n1GeneralSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.24
This is a n1 general information trap.
NOTIFICATION-TYPE    

n1HvacTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.25
This is a n1 HVAC tracking trap.
NOTIFICATION-TYPE    

n1FireTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.26
This is a n1 fire tracking trap.
NOTIFICATION-TYPE    

n1ServicesTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.27
This is a n1 service tracking trap.
NOTIFICATION-TYPE    

n1SecurityTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.28
This is a n1 security tracking trap.
NOTIFICATION-TYPE    

n1AdminTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.29
This is a n1 administrative tracking trap.
NOTIFICATION-TYPE    

n1GeneralTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.1.0.30
This is a n1 general tracking trap.
NOTIFICATION-TYPE    

bacnetDeviceFailureActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.1
This trap is sent when a bacnet device failure conditional event becomes active.
NOTIFICATION-TYPE    

bacnetDeviceFailureInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.2
This trap is sent when a bacnet device failure conditional event becomes inactive.
NOTIFICATION-TYPE    

bacnetDeviceFailureConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.3
This trap is sent when a bacnet device failure condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetHvacActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.4
This trap is sent when a bacnet HVAC conditional event becomes active.
NOTIFICATION-TYPE    

bacnetHvacInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.5
This trap is sent when a bacnet HVAC conditional event becomes inactive.
NOTIFICATION-TYPE    

bacnetHvacConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.6
This trap is sent when a bacnet HVAC condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetFireActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.7
This trap is sent when a bacnet fire conditional event becomes active.
NOTIFICATION-TYPE    

bacnetFireInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.8
This trap is sent when a bacnet fire conditional event becomes inactive.
NOTIFICATION-TYPE    

bacnetFireConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.9
This trap is sent when a bacnet fire condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetSecurityActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.10
This trap is sent when a security conditional event becomes active.
NOTIFICATION-TYPE    

bacnetSecurityInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.11
This trap is sent when a security conditional event becomes inactive.
NOTIFICATION-TYPE    

bacnetSecurityConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.12
This trap is sent when a bacnet security condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetServicesActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.13
This trap is sent when a bacnet services condition becomes active.
NOTIFICATION-TYPE    

bacnetServicesInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.14
This trap is sent when a bacnet services condition becomes inactive.
NOTIFICATION-TYPE    

bacnetServicesConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.15
This trap is sent when a bacnet services condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetAdminActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.16
This trap is sent when a bacnet administrative condition becomes active
NOTIFICATION-TYPE    

bacnetAdminInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.17
This trap is sent when a bacnet administrative condition becomes inactive.
NOTIFICATION-TYPE    

bacnetAdminConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.18
This trap is sent when a bacnet administrative condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetGeneralAlarmActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.19
This trap is sent when a bacnet general alarm is active.
NOTIFICATION-TYPE    

bacnetGeneralAlarmInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.20
This trap is sent when a bacnet general alarm becomes inactive.
NOTIFICATION-TYPE    

bacnetGeneralAlarmConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.21
This trap is sent when a bacnet general alarm is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetGeneralEventActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.22
This trap is sent when a device failure alarm is activated.
NOTIFICATION-TYPE    

bacnetGeneralEventInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.23
This trap is sent when a device failure alarm is no longer active.
NOTIFICATION-TYPE    

bacnetGeneralEventConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.24
This trap is sent when a device failure alarm has been acknowledged by an operator.
NOTIFICATION-TYPE    

bacnetPanelEventActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.25
This trap is sent when a bacnet panel event condition becomes active.
NOTIFICATION-TYPE    

bacnetPanelEventInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.26
This trap is sent when a bacnet panel event condition becomes inactive.
NOTIFICATION-TYPE    

bacnetPanelEventConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.27
This trap is sent when a bacnet panel event condition is acknowledged by a Metasys operator.
NOTIFICATION-TYPE    

bacnetPanelHWStatusActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.28
This trap is sent when a bacnet panel hardware status conditional event has becomes active.
NOTIFICATION-TYPE    

bacnetPanelHWStatusInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.29
This trap is sent when a bacnet panel hardware status conditional event has becomes inactive.
NOTIFICATION-TYPE    

bacnetPanelHWStatusConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.30
This trap is sent when a panel hardware status conditional event has been acknowledged by an operator.
NOTIFICATION-TYPE    

bacnetHostLogActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.31
This trap is sent when a bacnet host log condition becomes active.
NOTIFICATION-TYPE    

bacnetHostLogInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.32
This trap is sent when a bacnet host log condition becomes inactive.
NOTIFICATION-TYPE    

bacnetHostLogConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.33
This trap is sent when a bacnet host log condition has been acknowledged by an operator.
NOTIFICATION-TYPE    

bacnetOutputPointStatusActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.34
This trap is sent when a bacnet output point status conditional event is activated.
NOTIFICATION-TYPE    

bacnetOutputPointStatusInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.35
This trap is sent when a bacnet output point status conditional event is no longer active.
NOTIFICATION-TYPE    

bacnetOutputPointStatusConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.36
This trap is sent when a bacnet output point status condition has been acknowledged by an operator.
NOTIFICATION-TYPE    

bacnetInputPointStatusActiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.37
This trap is sent when a bacnet input point status event becomes active.
NOTIFICATION-TYPE    

bacnetInputPointStatusInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.38
This trap is sent when a bacnet input point status event is no longer active.
NOTIFICATION-TYPE    

bacnetInputPointStatusConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.2.0.39
This trap is sent when a bacnet input point status event has been acknowledged by an operator.
NOTIFICATION-TYPE    

bacnetHvacSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.40
This is a bacnet HVAC information trap.
NOTIFICATION-TYPE    

bacnetFireSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.41
This is a bacnet fire information trap.
NOTIFICATION-TYPE    

bacnetSecuritySimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.42
This is a bacnet security information trap.
NOTIFICATION-TYPE    

bacnetServicesSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.43
This is a bacnet services information trap.
NOTIFICATION-TYPE    

bacnetAdminSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.44
This is a bacnet administrative information trap.
NOTIFICATION-TYPE    

bacnetAccessGrantSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.45
This is a bacnet access granted information trap.
NOTIFICATION-TYPE    

bacnetAccessDenySimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.46
This is a bacnet access denied information trap.
NOTIFICATION-TYPE    

bacnetCardTraceSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.47
This is a bacnet card trace information trap.
NOTIFICATION-TYPE    

bacnetTAAccessGrantSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.48
This is a bacnet granted information trap.
NOTIFICATION-TYPE    

bacnetOutputPointStatusSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.49
This is a bacnet output point status information trap.
NOTIFICATION-TYPE    

bacnetInputPointStatusSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.50
This is a bacnet input point status information trap.
NOTIFICATION-TYPE    

bacnetAuditSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.51
This is a bacnet audit information trap.
NOTIFICATION-TYPE    

bacnetHostEventSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.52
This is a bacnet host event information trap.
NOTIFICATION-TYPE    

bacnetHostLogSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.53
This is a bacnet host log information trap.
NOTIFICATION-TYPE    

bacnetHostLogicSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.54
This is a bacnet host logic information trap.
NOTIFICATION-TYPE    

bacnetPanelEventSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.55
This is a bacnet panel event information trap.
NOTIFICATION-TYPE    

bacnetPanelHWStatusSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.56
This is a bacnet panel hardware status information trap.
NOTIFICATION-TYPE    

bacnetCommErrorSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.57
This is a bacnet communication error information trap.
NOTIFICATION-TYPE    

bacnetGeneralSimpleEvent 1.3.6.1.4.1.4399.2.1.10.3.2.0.58
This is a bacnet general information trap.
NOTIFICATION-TYPE    

opcStandardActiveGeneralConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.3.0.1
This trap is sent when an opc conditional event occurs.
NOTIFICATION-TYPE    

opcStandardInactiveConditionalEvent 1.3.6.1.4.1.4399.2.1.10.3.3.0.2
This trap is sent when an opc conditional event becomes inactive.
NOTIFICATION-TYPE    

opcStandardGeneralConditionalEventAcknowledged 1.3.6.1.4.1.4399.2.1.10.3.3.0.3
This trap is sent when an opc conditional event is acknowledged.
NOTIFICATION-TYPE    

opcStandardSimpleNotification 1.3.6.1.4.1.4399.2.1.10.3.3.0.4
This trap is sent for information purposes when an opc Simple event occurs.
NOTIFICATION-TYPE    

opcStandardTrackingEvent 1.3.6.1.4.1.4399.2.1.10.3.3.0.5
This is a generic opc Tracking notification sent for information purposes.
NOTIFICATION-TYPE