Intel-6000-Switch-MIB

File: Intel-6000-Switch-MIB.mib (101774 bytes)

Imported modules

RFC1155-SMI Intel-Common-MIB RFC-1212
RFC1213-MIB RFC-1215

Imported symbols

IpAddress Gauge TimeTicks
Counter switch-products OBJECT-TYPE
DisplayString TRAP-TYPE

Defined Types

TimeInterval  
INTEGER    

MacAddress  
OCTET STRING Size(6)    

VlanId  
INTEGER 1..4094    

PortNumber  
INTEGER 1..96    

BridgeId  
OCTET STRING Size(8)    

Timeout  
INTEGER    

EnableStatus  
INTEGER enable(1), disable(2)    

Boolean  
INTEGER true(1), false(2)    

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

CommInfoEntry  
SEQUENCE    
  commInfoIndex INTEGER 1..65535
  commInfoName DisplayString
  commInfoGet INTEGER
  commInfoSet INTEGER
  commInfoTrap INTEGER

HostInfoEntry  
SEQUENCE    
  hostInfoIndex INTEGER 1..65535
  hostInfoName DisplayString
  hostInfoIp IpAddress
  hostInfoComm DisplayString

SpanPortEntry  
SEQUENCE    
  spanPortPort PortNumber
  spanPortQuickStatus EnableStatus
  spanPortAuto INTEGER

FanInfoEntry  
SEQUENCE    
  fanIndex INTEGER 1..65535
  fanStatus INTEGER

PsInfoEntry  
SEQUENCE    
  psIndex INTEGER
  psPresent INTEGER
  psStatus INTEGER

GigabitPortTableEntry  
SEQUENCE    
  gigabitPortTableSlot INTEGER 1..5
  gigabitPortTablePort INTEGER
  gigabitPortTableLinkState INTEGER
  gigabitPortTablePortAutoNeg INTEGER

TenHundredPortTableEntry  
SEQUENCE    
  tenHundredPortTableSlot INTEGER 1..5
  tenHundredPortTablePort INTEGER
  tenHundredPortTableLinkState INTEGER
  tenHundredPortTableConfig INTEGER

VlanConfigEntry  
SEQUENCE    
  vlanConfigVID VlanId
  vlanConfigName DisplayString
  vlanConfigIpAddr IpAddress
  vlanConfigNetmask IpAddress
  vlanConfigBroadcast IpAddress
  vlanConfigRouting EnableStatus

VlanPortEntry  
SEQUENCE    
  vlanPortNumber PortNumber
  vlanPortTrustedVid Boolean
  vlanPortTrustedPriority Boolean

RoutingIfPrefEntry  
SEQUENCE    
  routingIfPrefAddress IpAddress
  routingIfPref INTEGER

StaticRouteEntry  
SEQUENCE    
  staticRouteDest IpAddress
  staticRouteMask IpAddress
  staticRouteNextHop IpAddress
  staticRouteIf IpAddress
  staticRoutePref INTEGER
  staticRouteType INTEGER
  staticRouteStatus INTEGER

ErrorEntry  
SEQUENCE    
  errorIndex INTEGER
  errorMsg DisplayString
  errorOid OBJECT IDENTIFIER
  errorTime TimeTicks

LinkStateEntry  
SEQUENCE    
  linkStateSlot INTEGER
  linkStatePort INTEGER
  linkStateState INTEGER
  linkStateTime TimeTicks

ModuleEntry  
SEQUENCE    
  moduleSlotNum INTEGER
  moduleCard INTEGER
  moduleContent INTEGER
  moduleDataValid INTEGER
  moduleText DisplayString

StormBcastControlEntry  
SEQUENCE    
  stormBcastControlPort INTEGER
  stormBcastControlThreshold INTEGER
  stormBcastControlDiscardPeriod INTEGER
  stormBcastControlRate INTEGER
  stormBcastControlDisables INTEGER
  stormBcastControlEnables INTEGER
  stormBcastControlTimeLeft INTEGER
  stormBcastControlStatus INTEGER

StormMcastControlEntry  
SEQUENCE    
  stormMcastControlPort INTEGER
  stormMcastControlThreshold INTEGER
  stormMcastControlDiscardPeriod INTEGER
  stormMcastControlRate INTEGER
  stormMcastControlDisables INTEGER
  stormMcastControlEnables INTEGER
  stormMcastControlTimeLeft INTEGER
  stormMcastControlStatus INTEGER

IgmpSnoopingVlanResetEntry  
SEQUENCE    
  igmpSnoopingVlanResetVlanId VlanId
  igmpSnoopingVlanResetData INTEGER
  igmpSnoopingVlanResetControl INTEGER

IgmpSnoopingDataPortEntry  
SEQUENCE    
  igmpSnoopingDataPortVlanId VlanId
  igmpSnoopingDataPortNumber PortNumber
  igmpSnoopingDataPortGroup INTEGER
  igmpSnoopingDataPortIpAddr IpAddress
  igmpSnoopingDataPortState INTEGER

IgmpSnoopingControlPortEntry  
SEQUENCE    
  igmpSnoopingControlPortVlanId VlanId
  igmpSnoopingControlPortNumber PortNumber
  igmpSnoopingControlPortState INTEGER
  igmpSnoopingControlPortRowStatus RowStatus

IgmpSnoopingStatusEntry  
SEQUENCE    
  igmpSnoopingVlanId VlanId
  igmpSnoopingMcastMacAddr MacAddress
  igmpSnoopingPort PortNumber

IgmpSnoopingIpStatusEntry  
SEQUENCE    
  igmpSnoopingIpVlanId VlanId
  igmpSnoopingIpMcastMacAddr MacAddress
  igmpSnoopingIpAddress IpAddress

PvstpEntry  
SEQUENCE    
  pvstpVlanId VlanId
  pvstpProtocolSpecification INTEGER
  pvstpPriority INTEGER
  pvstpTimeSinceTopologyChange TimeTicks
  pvstpTopChanges Counter
  pvstpDesignatedRoot BridgeId
  pvstpRootCost INTEGER
  pvstpRootPort INTEGER
  pvstpMaxAge Timeout
  pvstpHelloTime Timeout
  pvstpHoldTime INTEGER
  pvstpForwardDelay Timeout
  pvstpBridgeMaxAge Timeout
  pvstpBridgeHelloTime Timeout
  pvstpBridgeForwardDelay Timeout
  pvstpBridgeRapid INTEGER
  pvstpBridgeId BridgeId

PvstpPortEntry  
SEQUENCE    
  pvstpPortVlanId VlanId
  pvstpPort PortNumber
  pvstpPortPriority INTEGER
  pvstpPortState INTEGER
  pvstpPortEnable INTEGER
  pvstpPortPathCost INTEGER
  pvstpPortDesignatedRoot BridgeId
  pvstpPortDesignatedCost INTEGER
  pvstpPortDesignatedBridge BridgeId
  pvstpPortDesignatedPort OCTET STRING
  pvstpPortForwardTransitions Counter
  pvstpPortQuick INTEGER
  pvstpPortAuto INTEGER

RelayServerEntry  
SEQUENCE    
  relayServerIndex INTEGER
  relayServerAddress IpAddress

PortMirrorEntry  
SEQUENCE    
  portMirrorSourcePort PortNumber
  portMirrorMonitorPort PortNumber
  portMirrorRowStatus RowStatus

IpAccessCtlEntry  
SEQUENCE    
  ipAccessCtlRuleNumber INTEGER 1..1024
  ipAccessCtlSourceAddress IpAddress
  ipAccessCtlSourceMask IpAddress
  ipAccessCtlDestinationAddress IpAddress
  ipAccessCtlDestinationMask IpAddress
  ipAccessCtlType INTEGER
  ipAccessCtlRowStatus RowStatus

FdbAgeEntry  
SEQUENCE    
  fdbAgeId VlanId
  fdbAgeStatus EnableStatus
  fdbAgeTime INTEGER 10..32767

Defined Values

intel6000Switch 1.3.6.1.4.1.343.2.11.1
OBJECT IDENTIFIER    

express6000 1.3.6.1.4.1.343.2.11.1.1
OBJECT IDENTIFIER    

switchMIB 1.3.6.1.4.1.343.2.11.1.2
OBJECT IDENTIFIER    

switchConfigGroup 1.3.6.1.4.1.343.2.11.1.2.1
OBJECT IDENTIFIER    

monitorGroup 1.3.6.1.4.1.343.2.11.1.2.2
OBJECT IDENTIFIER    

commGroup 1.3.6.1.4.1.343.2.11.1.2.3
OBJECT IDENTIFIER    

hostGroup 1.3.6.1.4.1.343.2.11.1.2.4
OBJECT IDENTIFIER    

serialGroup 1.3.6.1.4.1.343.2.11.1.2.5
OBJECT IDENTIFIER    

spanGroup 1.3.6.1.4.1.343.2.11.1.2.9
OBJECT IDENTIFIER    

fanGroup 1.3.6.1.4.1.343.2.11.1.2.10
OBJECT IDENTIFIER    

psGroup 1.3.6.1.4.1.343.2.11.1.2.11
OBJECT IDENTIFIER    

tempGroup 1.3.6.1.4.1.343.2.11.1.2.13
OBJECT IDENTIFIER    

gigabitGroup 1.3.6.1.4.1.343.2.11.1.2.14
OBJECT IDENTIFIER    

tenHundredGroup 1.3.6.1.4.1.343.2.11.1.2.15
OBJECT IDENTIFIER    

vlanGroup 1.3.6.1.4.1.343.2.11.1.2.16
OBJECT IDENTIFIER    

routingGroup 1.3.6.1.4.1.343.2.11.1.2.17
OBJECT IDENTIFIER    

errorGroup 1.3.6.1.4.1.343.2.11.1.2.18
OBJECT IDENTIFIER    

linkStateGroup 1.3.6.1.4.1.343.2.11.1.2.19
OBJECT IDENTIFIER    

carrierGroup 1.3.6.1.4.1.343.2.11.1.2.20
OBJECT IDENTIFIER    

moduleGroup 1.3.6.1.4.1.343.2.11.1.2.21
OBJECT IDENTIFIER    

pingGroup 1.3.6.1.4.1.343.2.11.1.2.22
OBJECT IDENTIFIER    

dnsGroup 1.3.6.1.4.1.343.2.11.1.2.23
OBJECT IDENTIFIER    

stormControlGroup 1.3.6.1.4.1.343.2.11.1.2.24
OBJECT IDENTIFIER    

igmpSnoopingGroup 1.3.6.1.4.1.343.2.11.1.2.25
OBJECT IDENTIFIER    

pvstpGroup 1.3.6.1.4.1.343.2.11.1.2.26
OBJECT IDENTIFIER    

relayGroup 1.3.6.1.4.1.343.2.11.1.2.27
OBJECT IDENTIFIER    

portMirrorGroup 1.3.6.1.4.1.343.2.11.1.2.29
OBJECT IDENTIFIER    

ipAccessCtlGroup 1.3.6.1.4.1.343.2.11.1.2.30
OBJECT IDENTIFIER    

fdbGroup 1.3.6.1.4.1.343.2.11.1.2.31
OBJECT IDENTIFIER    

ipAddress 1.3.6.1.4.1.343.2.11.1.2.1.1
IP address for the management port of this entity.
OBJECT-TYPE    
  IpAddress  

netMask 1.3.6.1.4.1.343.2.11.1.2.1.2
The netmask for the management port of this entity.
OBJECT-TYPE    
  IpAddress  

defaultGateway 1.3.6.1.4.1.343.2.11.1.2.1.3
The IP address of the Default Gateway for this entity.
OBJECT-TYPE    
  IpAddress  

broadcastAddress 1.3.6.1.4.1.343.2.11.1.2.1.4
The broadcast address for the management port of this entity.
OBJECT-TYPE    
  IpAddress  

maxMacAddresses 1.3.6.1.4.1.343.2.11.1.2.1.5
Largest aggregate number of MAC addresses which this entity can support simultaneously.
OBJECT-TYPE    
  INTEGER  

clearStatistics 1.3.6.1.4.1.343.2.11.1.2.1.6
Setting this variable to TRUE (1) clears the traffic statistics accumulators on this entity. Setting this variable to any other value has no effect. The variable always returns 0 when read.
OBJECT-TYPE    
  INTEGER  

ageFilterDatabase 1.3.6.1.4.1.343.2.11.1.2.1.7
Setting this variable to FALSE (0) causes this entity to stop aging out entries from its filter database. Setting this variable to TRUE (1) causes this entity to age out filter database entries as defined in IEEE 802.1D. Whenever this entity restarts, this variable keeps previously assigned value.
OBJECT-TYPE    
  INTEGER  

entMibVersion 1.3.6.1.4.1.343.2.11.1.2.1.8
The revision level of the MIB contained in the CP firmware.
OBJECT-TYPE    
  DisplayString  

telnetEnable 1.3.6.1.4.1.343.2.11.1.2.1.9
The current state of the telnet daemon in the Switch. If this field is set to disable, external accesses via telnet will not be permitted.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

syslogEnable 1.3.6.1.4.1.343.2.11.1.2.1.10
The current state of remote IP system logging. If enabled, the Switch will log messages to the SyslogIp IP address. If it is disabled, it will log messages to the console only.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

syslogIp 1.3.6.1.4.1.343.2.11.1.2.1.11
The Ip address for remote IP system logging. If syslogEnabled is enabled, the Switch log messages to this IP.
OBJECT-TYPE    
  IpAddress  

syslogCmds 1.3.6.1.4.1.343.2.11.1.2.1.12
If system logging is enabled, this field enables or disables the logging of commands issued on a terminal command line.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

syslogOut 1.3.6.1.4.1.343.2.11.1.2.1.13
If system logging is enabled, this field enables or disables the logging of output from the terminal.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

nvramLoadSave 1.3.6.1.4.1.343.2.11.1.2.1.14
This field triggers loading and saving of the system settings in non-volatile RAM space. To trigger a load or a save the NVRAM IP address must first be set below. This field is always read as one. The filename used will be the hexadecimal value of this systems IP address.
OBJECT-TYPE    
  INTEGER load(1), save(2)  

nvramLastOpStat 1.3.6.1.4.1.343.2.11.1.2.1.15
This field shows the outcome of the last NVRAM load or save. If the NVRAM update was sucessful, this field will return one.
OBJECT-TYPE    
  INTEGER noError(1), loadFailed(2), saveFailed(3)  

nvramRemoteIp 1.3.6.1.4.1.343.2.11.1.2.1.16
This is the IP address of the remote tftp machine where the NVRAM is to be loaded or saved. For nvramLoadSave to have an effect, this field must be set to a vaild IP address.
OBJECT-TYPE    
  IpAddress  

nvramRemotePath 1.3.6.1.4.1.343.2.11.1.2.1.17
This is the path on the remote machine where the NVRAM image is to be retrieved or stored. This path does not include the filename, and does not end with a /. This field is optional, and if left empty, the system will use the default tftp location.
OBJECT-TYPE    
  DisplayString  

diagnosticsResults 1.3.6.1.4.1.343.2.11.1.2.2.1
A result of the most recent diagnostic test for the whole stack.
OBJECT-TYPE    
  INTEGER ok(1), warnings(2), failure(3)  

diagnosticsTime 1.3.6.1.4.1.343.2.11.1.2.2.2
The date and time of the most recent diagnostic test for the whole stack.
OBJECT-TYPE    
  DisplayString  

lastDiagnosticsTest 1.3.6.1.4.1.343.2.11.1.2.2.3
The number indicating what diagnostic test was run last. The list represents the power-up diagnostic test sequence. Normally the returned value should be the index of the last test in the sequence.
OBJECT-TYPE    
  INTEGER memoryTest(1), flashTest(2), camTest(3), nvramTest(4), asicRandomFrameTest(5), asicLoopbackTest(6), asicBusRegistersTest(7), asicRamRegistersTest(8), serialEepromTest(9), duartTest(10)  

commNumComms 1.3.6.1.4.1.343.2.11.1.2.3.1
The number of SNMP Communities currently configured in this system. This number should reflect the number of entries in the commInfoTable.
OBJECT-TYPE    
  INTEGER 1..65535  

commInfoTable 1.3.6.1.4.1.343.2.11.1.2.3.2
A list of Switch Configuration Community Entries
OBJECT-TYPE    
  SEQUENCE OF  
    CommInfoEntry

commInfoEntry 1.3.6.1.4.1.343.2.11.1.2.3.2.1
A list of Community properties for the Switch.
OBJECT-TYPE    
  CommInfoEntry  

commInfoIndex 1.3.6.1.4.1.343.2.11.1.2.3.2.1.1
An index that uniquely identifies an entry in the Switch Community Info Table.
OBJECT-TYPE    
  INTEGER 1..65535  

commInfoName 1.3.6.1.4.1.343.2.11.1.2.3.2.1.2
The name of this Switch Community Entry.
OBJECT-TYPE    
  DisplayString  

commInfoGet 1.3.6.1.4.1.343.2.11.1.2.3.2.1.3
The GET permission for the community.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

commInfoSet 1.3.6.1.4.1.343.2.11.1.2.3.2.1.4
The SET permission for the community.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

commInfoTrap 1.3.6.1.4.1.343.2.11.1.2.3.2.1.5
The TRAP permission for the community.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

commAltTrapPort 1.3.6.1.4.1.343.2.11.1.2.3.3
An alternate port to which the agent will send TRAP notifications. Note that the agent will continue to send TRAPs to the SNMP port. Setting this value to zero disables sending TRAPs to the alternate port.
OBJECT-TYPE    
  INTEGER 0 | 2000..9000  

commSnmpSecurityLevel 1.3.6.1.4.1.343.2.11.1.2.3.4
Security level to be used by the agent when checking requests. Level 1 check community string on get and set. Level 2 check community string on get, community string and host on set Level 3 check community string and host on get and set.
OBJECT-TYPE    
  INTEGER 1..3  

hostNumHosts 1.3.6.1.4.1.343.2.11.1.2.4.1
The current number of SNMP hosts in the system. Each host is allowed to perform get, set, and trap operations based on its associated community.
OBJECT-TYPE    
  INTEGER 1..65535  

hostInfoTable 1.3.6.1.4.1.343.2.11.1.2.4.2
A list of Switch Configuration Host Entries
OBJECT-TYPE    
  SEQUENCE OF  
    HostInfoEntry

hostInfoEntry 1.3.6.1.4.1.343.2.11.1.2.4.2.1
A list of Host properties for the Switch
OBJECT-TYPE    
  HostInfoEntry  

hostInfoIndex 1.3.6.1.4.1.343.2.11.1.2.4.2.1.1
An index that uniquely identifies an entry in the Switch Host Info Table.
OBJECT-TYPE    
  INTEGER 1..65535  

hostInfoName 1.3.6.1.4.1.343.2.11.1.2.4.2.1.2
The name of this Switch Host Entry.
OBJECT-TYPE    
  DisplayString  

hostInfoIp 1.3.6.1.4.1.343.2.11.1.2.4.2.1.3
The IP Address for the host.
OBJECT-TYPE    
  IpAddress  

hostInfoComm 1.3.6.1.4.1.343.2.11.1.2.4.2.1.4
The name of the community this host belongs to.
OBJECT-TYPE    
  DisplayString  

serialBaudRate 1.3.6.1.4.1.343.2.11.1.2.5.1
The baud rate in bits per second of the RS-232 port.
OBJECT-TYPE    
  INTEGER baud600(1), baud1200(2), baud2400(3), baud4800(4), baud9600(5), baud19200(6), baud38400(7)  

modemControlLines 1.3.6.1.4.1.343.2.11.1.2.5.2
Indicates whether the RS-232 port modem control lines are enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

spanOnOff 1.3.6.1.4.1.343.2.11.1.2.9.1
Turns Spanning Tree ON/OFF for the switch.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

spanType 1.3.6.1.4.1.343.2.11.1.2.9.2
Type of spanning tree.
OBJECT-TYPE    
  INTEGER single(1), pvstp(2)  

spanResetDefaults 1.3.6.1.4.1.343.2.11.1.2.9.4
Reset all settable spanning tree parameters to defaults.
OBJECT-TYPE    
  INTEGER reset(1), other(2)  

spanRapid 1.3.6.1.4.1.343.2.11.1.2.9.5
When spanType is STP, turns Spanning Tree Rapid Reconfiguration ON/OFF.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

spanPortTable 1.3.6.1.4.1.343.2.11.1.2.9.6
Table containing per-port status for single spanning tree.
OBJECT-TYPE    
  SEQUENCE OF  
    SpanPortEntry

spanPortEntry 1.3.6.1.4.1.343.2.11.1.2.9.6.1
Per-port status for single spanning tree.
OBJECT-TYPE    
  SpanPortEntry  

spanPortPort 1.3.6.1.4.1.343.2.11.1.2.9.6.1.1
The port number on the switch.
OBJECT-TYPE    
  PortNumber  

spanPortQuickStatus 1.3.6.1.4.1.343.2.11.1.2.9.6.1.2
The current status, enabled or disabled, of Port Quick for this port.
OBJECT-TYPE    
  EnableStatus  

spanPortAuto 1.3.6.1.4.1.343.2.11.1.2.9.6.1.3
Path cost is either Fixed or Auto. If Auto, cost is calculated automatically, and depends on media data rates and link aggregation.
OBJECT-TYPE    
  INTEGER fixed(1), auto(2)  

fanNumFans 1.3.6.1.4.1.343.2.11.1.2.10.1
The total number of fans possible in this chassis. A fan need not be present to count.
OBJECT-TYPE    
  INTEGER 1..65535  

fanInfoTable 1.3.6.1.4.1.343.2.11.1.2.10.2
A list of Fan States
OBJECT-TYPE    
  SEQUENCE OF  
    FanInfoEntry

fanInfoEntry 1.3.6.1.4.1.343.2.11.1.2.10.2.1
A list of Fan properties for the Switch
OBJECT-TYPE    
  FanInfoEntry  

fanIndex 1.3.6.1.4.1.343.2.11.1.2.10.2.1.1
An index that uniquely identifies an entry in the Switch Fan Table.
OBJECT-TYPE    
  INTEGER 1..65535  

fanStatus 1.3.6.1.4.1.343.2.11.1.2.10.2.1.2
States operational status of Fan.
OBJECT-TYPE    
  INTEGER ok(1), nok(2)  

psNumber 1.3.6.1.4.1.343.2.11.1.2.11.1
The number of power supplies this chassis is capable of holding. A power supply need not be present to count.
OBJECT-TYPE    
  INTEGER 1..65535  

psInfoTable 1.3.6.1.4.1.343.2.11.1.2.11.2
A list of Power Supply States
OBJECT-TYPE    
  SEQUENCE OF  
    PsInfoEntry

psInfoEntry 1.3.6.1.4.1.343.2.11.1.2.11.2.1
A list of Power Supply properties for the Switch
OBJECT-TYPE    
  PsInfoEntry  

psIndex 1.3.6.1.4.1.343.2.11.1.2.11.2.1.1
An index that uniquely identifies an entry in the Switch Power Supply Table.
OBJECT-TYPE    
  INTEGER a(1), b(2), c(3)  

psPresent 1.3.6.1.4.1.343.2.11.1.2.11.2.1.2
States presence of Power Supply.
OBJECT-TYPE    
  INTEGER installed(1), uninstalled(2)  

psStatus 1.3.6.1.4.1.343.2.11.1.2.11.2.1.3
States operational status of Power Supply.
OBJECT-TYPE    
  INTEGER ok(1), nok(2)  

tempCurrent 1.3.6.1.4.1.343.2.11.1.2.13.1
The current temperature of the switch in degrees centigrade.
OBJECT-TYPE    
  INTEGER  

tempAlarm 1.3.6.1.4.1.343.2.11.1.2.13.2
The status of the temperature alarm. This alarm is on if the current temperature exceeds the high water mark.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

tempHighest 1.3.6.1.4.1.343.2.11.1.2.13.3
The highest temperature reached after the temperature alarm. If the alarm is not active, the value is zero.
OBJECT-TYPE    
  INTEGER  

tempHigh 1.3.6.1.4.1.343.2.11.1.2.13.4
The high water mark for the temperature. If this temperature is exceeded, the temperature alarm is activated.
OBJECT-TYPE    
  INTEGER  

tempLow 1.3.6.1.4.1.343.2.11.1.2.13.5
The low water mark for the temperature. If the temperature falls below the low water mark, the temperature alarm will be reset.
OBJECT-TYPE    
  INTEGER  

gigabitPortTable 1.3.6.1.4.1.343.2.11.1.2.14.2
This table contains the per port gigabit configurables. The indexes reference a gigabit slot, and the ports numbered from one from the left most port.
OBJECT-TYPE    
  SEQUENCE OF  
    GigabitPortTableEntry

gigabitPortTableEntry 1.3.6.1.4.1.343.2.11.1.2.14.2.1
A list of gigabit configurables for the switch
OBJECT-TYPE    
  GigabitPortTableEntry  

gigabitPortTableSlot 1.3.6.1.4.1.343.2.11.1.2.14.2.1.1
The slot in which this gigabit card resides. This slot should be the same as one of the valid gigabit slots in the slot table of this MIB.
OBJECT-TYPE    
  INTEGER 1..5  

gigabitPortTablePort 1.3.6.1.4.1.343.2.11.1.2.14.2.1.2
The number of the gigabit port on the card. These ports specify an individual port on a gigabit switch or a gigabit repeater. A port here does not represent a unique interface in the interfaces table.
OBJECT-TYPE    
  INTEGER 1..128  

gigabitPortTableLinkState 1.3.6.1.4.1.343.2.11.1.2.14.2.1.4
This field shows the current link state of the gigabit sub-port.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

gigabitPortTablePortAutoNeg 1.3.6.1.4.1.343.2.11.1.2.14.2.1.5
The current ability of this port to participate in autonegotiation.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

tenHundredPortTable 1.3.6.1.4.1.343.2.11.1.2.15.1
This table contains the per port information for the 10/100 Ethernet boards in the system. This table will be indexed by slot and port.
OBJECT-TYPE    
  SEQUENCE OF  
    TenHundredPortTableEntry

tenHundredPortTableEntry 1.3.6.1.4.1.343.2.11.1.2.15.1.1
A list of 10/100 Ethernet configurables for the switch.
OBJECT-TYPE    
  TenHundredPortTableEntry  

tenHundredPortTableSlot 1.3.6.1.4.1.343.2.11.1.2.15.1.1.1
The slot in which this 10/100 card resides. This slot should be the same as one of the valid 10/100 slots in the slot table of this MIB.
OBJECT-TYPE    
  INTEGER 1..5  

tenHundredPortTablePort 1.3.6.1.4.1.343.2.11.1.2.15.1.1.2
The number of the 10/100 port on the system. A port here represents a unique interface in the the interfaces table.
OBJECT-TYPE    
  INTEGER 1..128  

tenHundredPortTableLinkState 1.3.6.1.4.1.343.2.11.1.2.15.1.1.3
This field shows the current link state of the 10/100 port.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

tenHundredPortTableConfig 1.3.6.1.4.1.343.2.11.1.2.15.1.1.4
The autonegotiate mode, speed, and duplex mode for this port. If link state is UP, then this object represents the settings for the active connect. If link state is DOWN, then this ojbect represents the connection mode(s) that this port will accept.
OBJECT-TYPE    
  INTEGER autoTenHalf(1), autoHundredHalf(2), autoTenHundredHalf(3), autoTenFull(4), autoHundredFull(5), autoTenHundredFull(6), autoTenHalfFull(7), autoHundredHalfFull(8), autoTenHundredHalfFull(9), tenHalf(10), hundredHalf(11), tenFull(12), hundredFull(13), unknown(20)  

vlanValid 1.3.6.1.4.1.343.2.11.1.2.16.1
This field displays if the current VLAN configuration in the Switch is valid.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vlanConfigTable 1.3.6.1.4.1.343.2.11.1.2.16.2
This table contains the virtual lan configuration parameters for each virtual lan configured in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    VlanConfigEntry

vlanConfigEntry 1.3.6.1.4.1.343.2.11.1.2.16.2.1
An entry containing information about the Virtual Lan configuration.
OBJECT-TYPE    
  VlanConfigEntry  

vlanConfigVID 1.3.6.1.4.1.343.2.11.1.2.16.2.1.1
The Virtual Lan Id number.
OBJECT-TYPE    
  VlanId  

vlanConfigName 1.3.6.1.4.1.343.2.11.1.2.16.2.1.2
The name associated with this virtual lan ID.
OBJECT-TYPE    
  DisplayString  

vlanConfigIpAddr 1.3.6.1.4.1.343.2.11.1.2.16.2.1.3
The IP address associated with this virtual lan.
OBJECT-TYPE    
  IpAddress  

vlanConfigNetmask 1.3.6.1.4.1.343.2.11.1.2.16.2.1.4
The netmask associated with this virtual lan.
OBJECT-TYPE    
  IpAddress  

vlanConfigBroadcast 1.3.6.1.4.1.343.2.11.1.2.16.2.1.5
The broadcast address associated with this virtual lan.
OBJECT-TYPE    
  IpAddress  

vlanConfigRouting 1.3.6.1.4.1.343.2.11.1.2.16.2.1.6
Enable or disable routing on a per-vlan basis.
OBJECT-TYPE    
  EnableStatus  

vlanReset 1.3.6.1.4.1.343.2.11.1.2.16.3
Reset VLAN configuration to factory defaults.
OBJECT-TYPE    
  INTEGER reset(1)  

vlanPortTable 1.3.6.1.4.1.343.2.11.1.2.16.4
This table contains the virtual lan configuration parameters which are configured on a per-port basis.
OBJECT-TYPE    
  SEQUENCE OF  
    VlanPortEntry

vlanPortEntry 1.3.6.1.4.1.343.2.11.1.2.16.4.1
An entry containing the virtual lan configuration parameters which are configured on a per-port basis.
OBJECT-TYPE    
  VlanPortEntry  

vlanPortNumber 1.3.6.1.4.1.343.2.11.1.2.16.4.1.1
External port number. This number corresponds to the ifTable ifIndex.
OBJECT-TYPE    
  PortNumber  

vlanPortTrustedVid 1.3.6.1.4.1.343.2.11.1.2.16.4.1.2
If VlanPortTrustedVid is 'true', then the VID of tagged frames is alwasy used, otherwise, the PVID of the port is used even if the frame is tagged.
OBJECT-TYPE    
  Boolean  

vlanPortTrustedPriority 1.3.6.1.4.1.343.2.11.1.2.16.4.1.3
If VlanPortTrustedPriority is 'true', then the priority of tagged frames is always used, otherwise, the default port priority is used even if the frame is tagged.
OBJECT-TYPE    
  Boolean  

routingRouterId 1.3.6.1.4.1.343.2.11.1.2.17.1
A 32-bit integer uniquely identifying the switch. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object cannot be accessed unless GateD is enabled.
OBJECT-TYPE    
  IpAddress  

routingScanInterval 1.3.6.1.4.1.343.2.11.1.2.17.2
The number of seconds indicating how often GateD will check with the kernel for the interface changes when no notification is received from the kernel. This object cannot be accessed unless routing is enabled.
OBJECT-TYPE    
  INTEGER 15..3600  

routingConfigGroup 1.3.6.1.4.1.343.2.11.1.2.17.3
OBJECT IDENTIFIER    

routingEnable 1.3.6.1.4.1.343.2.11.1.2.17.3.1
Enable/disable routing. Writing enableInit to this object starts the GateD process, but does not enable any routing protocols. enableRestore starts the GateD process and restores the GateD configuration from nonvolatile memory. When read, this object will return either enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), enableInit(3), enableRestore(4)  

routingRipConf 1.3.6.1.4.1.343.2.11.1.2.17.3.2
Enable/disable RIPv2.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

routingOspfConf 1.3.6.1.4.1.343.2.11.1.2.17.3.3
Enable/disable OSPF.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

routingPreferencesGroup 1.3.6.1.4.1.343.2.11.1.2.17.4
OBJECT IDENTIFIER    

routingOspfPref 1.3.6.1.4.1.343.2.11.1.2.17.4.1
The preference level for OSPF-based routing This object cannot be accessed unless routing is enabled.
OBJECT-TYPE    
  INTEGER 0..255  

routingStaticConfigPref 1.3.6.1.4.1.343.2.11.1.2.17.4.2
The preference level for the default static route. This object cannot be accessed unless routing is enabled.
OBJECT-TYPE    
  INTEGER 0..255  

routingRipPref 1.3.6.1.4.1.343.2.11.1.2.17.4.3
The preference level for rip-based routing This object cannot be accessed unless routing is enabled.
OBJECT-TYPE    
  INTEGER 0..255  

routingOspfAsExtPref 1.3.6.1.4.1.343.2.11.1.2.17.4.4
The preference level for OSPF as extern based routing This object cannot be accessed unless routing is enabled.
OBJECT-TYPE    
  INTEGER 0..255  

routingIfPrefTable 1.3.6.1.4.1.343.2.11.1.2.17.5
A list of local interfaces and their preference levels.
OBJECT-TYPE    
  SEQUENCE OF  
    RoutingIfPrefEntry

routingIfPrefEntry 1.3.6.1.4.1.343.2.11.1.2.17.5.1
An interface-preference pair.
OBJECT-TYPE    
  RoutingIfPrefEntry  

routingIfPrefAddress 1.3.6.1.4.1.343.2.11.1.2.17.5.1.1
The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
OBJECT-TYPE    
  IpAddress  

routingIfPref 1.3.6.1.4.1.343.2.11.1.2.17.5.1.2
The preference level for this interface
OBJECT-TYPE    
  INTEGER 0..255  

staticRouteNumber 1.3.6.1.4.1.343.2.11.1.2.17.6
The number of current staticRouteTable entries that are not invalid.
OBJECT-TYPE    
  Gauge  

staticRouteTable 1.3.6.1.4.1.343.2.11.1.2.17.7
This entity's static IP routing config table.
OBJECT-TYPE    
  SEQUENCE OF  
    StaticRouteEntry

staticRouteEntry 1.3.6.1.4.1.343.2.11.1.2.17.7.1
A particular static route to a particular destination.
OBJECT-TYPE    
  StaticRouteEntry  

staticRouteDest 1.3.6.1.4.1.343.2.11.1.2.17.7.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the staticRouteMask object is not equal to x.
OBJECT-TYPE    
  IpAddress  

staticRouteMask 1.3.6.1.4.1.343.2.11.1.2.17.7.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the staticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the staticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the staticRouteDest object is not equal to staticRouteDest.
OBJECT-TYPE    
  IpAddress  

staticRouteNextHop 1.3.6.1.4.1.343.2.11.1.2.17.7.1.3
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

staticRouteIf 1.3.6.1.4.1.343.2.11.1.2.17.7.1.4
The local interface through which the next hop of this route should be reached.
OBJECT-TYPE    
  IpAddress  

staticRoutePref 1.3.6.1.4.1.343.2.11.1.2.17.7.1.5
The preference value for this route. Default value is 20 for the default route, 60 otherwise.
OBJECT-TYPE    
  INTEGER 0..255  

staticRouteType 1.3.6.1.4.1.343.2.11.1.2.17.7.1.6
The type of route.
OBJECT-TYPE    
  INTEGER retain(1), reject(2), blackhole(3), notinstall(4), normal(5)  

staticRouteStatus 1.3.6.1.4.1.343.2.11.1.2.17.7.1.7
The row status variable, used according to row installation and removal conventions.
OBJECT-TYPE    
  INTEGER  

routingSaveConfig 1.3.6.1.4.1.343.2.11.1.2.17.8
Write to this object to save the current router configuration to nonvolatile storage. The agent will perform an activate before saving. You cannot save the configuration unless routing is enabled.
OBJECT-TYPE    
  INTEGER save(1)  

errorTable 1.3.6.1.4.1.343.2.11.1.2.18.1
A list of SNMP User-error Entries.
OBJECT-TYPE    
  SEQUENCE OF  
    ErrorEntry

errorEntry 1.3.6.1.4.1.343.2.11.1.2.18.1.1
A description of an SNMP user-error.
OBJECT-TYPE    
  ErrorEntry  

errorIndex 1.3.6.1.4.1.343.2.11.1.2.18.1.1.1
An index that uniquely identifies an entry in the Error Table.
OBJECT-TYPE    
  INTEGER 1..32  

errorMsg 1.3.6.1.4.1.343.2.11.1.2.18.1.1.2
The description of the SNMP configuration error.
OBJECT-TYPE    
  DisplayString  

errorOid 1.3.6.1.4.1.343.2.11.1.2.18.1.1.3
The object ID for the SNMP manager request which caused this error.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

errorTime 1.3.6.1.4.1.343.2.11.1.2.18.1.1.4
The time, in hundreths of a second since system boot, that the error occurred.
OBJECT-TYPE    
  TimeTicks  

clearErrorTable 1.3.6.1.4.1.343.2.11.1.2.18.2
Writing true to this object clears the SNMP Error Table.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

linkStateTable 1.3.6.1.4.1.343.2.11.1.2.19.1
This table contains the link states of every port on the switch, indexed by slot number and local (per-slot) port number.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkStateEntry

linkStateEntry 1.3.6.1.4.1.343.2.11.1.2.19.1.1
Each entry contains the link state and last-changed time of a port on the switch, indexed by slot number and local port number.
OBJECT-TYPE    
  LinkStateEntry  

linkStateSlot 1.3.6.1.4.1.343.2.11.1.2.19.1.1.1
The index of this media card on the Switch chassis. Media card indices begin at one, at the top of the chassis.
OBJECT-TYPE    
  INTEGER 1..12  

linkStatePort 1.3.6.1.4.1.343.2.11.1.2.19.1.1.2
The index of this port on the media card. Port indices begin at one, at the left side of the card, when viewed from the front.
OBJECT-TYPE    
  INTEGER 1..48  

linkStateState 1.3.6.1.4.1.343.2.11.1.2.19.1.1.3
The current link state of this port.
OBJECT-TYPE    
  INTEGER fddi-disabled(1), fddi-connecting(2), fddi-standby(3), fddi-active(4), reserved1(5), reserved2(6), ethernet-up(7), ethernet-down(8)  

linkStateTime 1.3.6.1.4.1.343.2.11.1.2.19.1.1.4
The most recent time, in hundreths of a second since system boot, that this port's link state changed.
OBJECT-TYPE    
  TimeTicks  

carrierCPSlotID 1.3.6.1.4.1.343.2.11.1.2.20.1
Indicates which slot contains the master CP.
OBJECT-TYPE    
  INTEGER cpA(1), cpB(2)  

carrierStatusA 1.3.6.1.4.1.343.2.11.1.2.20.2
Indicates whether CP board A is inserted, and if inserted, whether it is running.
OBJECT-TYPE    
  INTEGER notInserted(1), insertedNotRunning(2), insertedRunning(3)  

carrierStatusB 1.3.6.1.4.1.343.2.11.1.2.20.3
Indicates whether CP board B is inserted, and if inserted, whether it is running.
OBJECT-TYPE    
  INTEGER notInserted(1), insertedNotRunning(2), insertedRunning(3)  

moduleTable 1.3.6.1.4.1.343.2.11.1.2.21.1
Table containing hardware and software configuration information.
OBJECT-TYPE    
  SEQUENCE OF  
    ModuleEntry

moduleEntry 1.3.6.1.4.1.343.2.11.1.2.21.1.1
Hardware and software configuration data.
OBJECT-TYPE    
  ModuleEntry  

moduleSlotNum 1.3.6.1.4.1.343.2.11.1.2.21.1.1.1
The Slot ID of the switch. Slot 1 is physically the top slot in a chassis.
OBJECT-TYPE    
  INTEGER 1..24  

moduleCard 1.3.6.1.4.1.343.2.11.1.2.21.1.1.2
The specific card within a slot.
OBJECT-TYPE    
  INTEGER unknown(1), empty(2), carrier(3), cpA(4), cpB(5), gigSwitch8(6), tenHundred24(7), hundredFX12(8)  

moduleContent 1.3.6.1.4.1.343.2.11.1.2.21.1.1.3
The content-type for this entry.
OBJECT-TYPE    
  INTEGER sysVersion(1), bootVersion(2), xilinxVclue(3), bctXilinx(4), ccXilinx(5), i8051(6), sysImage(7), carrierLue(8), webImage(9), cpSCtrlXilinx(10), cpCtrlXilinx(11), cfgPld(12), upIf(13), rqm(14), xpt(15), lxa(16), xBar(17), imp(18), tqmPl(19), tqmCtl(20), tqmFbc(21), serialNum(22), mac(23), hwRev(24), model(25), mfgDate(26), variance(27), feature(28), moduleStatus(29), moduleName(30), mediaType(31), connectorType(32), tsunami(33), twister(34)  

moduleDataValid 1.3.6.1.4.1.343.2.11.1.2.21.1.1.4
Indicates whether the version text is initialized.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

moduleText 1.3.6.1.4.1.343.2.11.1.2.21.1.1.5
A text string containing hardware or sofware version information.
OBJECT-TYPE    
  DisplayString  

pingHostAddress 1.3.6.1.4.1.343.2.11.1.2.22.1
The hostname or host IP address for the PING.
OBJECT-TYPE    
  DisplayString  

pingRequest 1.3.6.1.4.1.343.2.11.1.2.22.2
Writing any value to this object sends a PING.
OBJECT-TYPE    
  INTEGER  

pingTime 1.3.6.1.4.1.343.2.11.1.2.22.3
PING roundtrip time in milliseconds.
OBJECT-TYPE    
  INTEGER  

pingStatus 1.3.6.1.4.1.343.2.11.1.2.22.4
Status of most recent ping request.
OBJECT-TYPE    
  INTEGER noData(1), waitingForReply(2), timedOut(3), success(4), error(5)  

dnsEnable 1.3.6.1.4.1.343.2.11.1.2.23.1
The current state of the Domain Name Server in the Switch. If this field is set to enable, Domain Name Services will be supported.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dnsDomainName 1.3.6.1.4.1.343.2.11.1.2.23.2
The Domain Name for the network this switch is on.
OBJECT-TYPE    
  DisplayString  

dnsPrimaryServer 1.3.6.1.4.1.343.2.11.1.2.23.3
The primary DNS server for the network this switch is on.
OBJECT-TYPE    
  DisplayString  

dnsBackupServer 1.3.6.1.4.1.343.2.11.1.2.23.4
The secondary DNS server for the network this switch is on.
OBJECT-TYPE    
  DisplayString  

stormBcastControlTable 1.3.6.1.4.1.343.2.11.1.2.24.1
Table containing configuration and status information for broadcast storm control.
OBJECT-TYPE    
  SEQUENCE OF  
    StormBcastControlEntry

stormBcastControlEntry 1.3.6.1.4.1.343.2.11.1.2.24.1.1
Configuration and status for broadcast storm control.
OBJECT-TYPE    
  StormBcastControlEntry  

stormBcastControlPort 1.3.6.1.4.1.343.2.11.1.2.24.1.1.1
The port number on the switch, equivalent to ifIndex.
OBJECT-TYPE    
  INTEGER 1..1024  

stormBcastControlThreshold 1.3.6.1.4.1.343.2.11.1.2.24.1.1.2
The broadcast frame rate, in percent of total bandwidth, at which discarding is triggered for this port.
OBJECT-TYPE    
  INTEGER 1..100  

stormBcastControlDiscardPeriod 1.3.6.1.4.1.343.2.11.1.2.24.1.1.3
The amount of time, in seconds, that discarding will continue on this port once triggered. If the discard period is set to zero seconds and the port transitions to discarding state, then user intervention is required to remove the port from discarding state.
OBJECT-TYPE    
  INTEGER 0..256  

stormBcastControlRate 1.3.6.1.4.1.343.2.11.1.2.24.1.1.4
The current broadcast rate, measured as a precentage of total bandwidth, for this port.
OBJECT-TYPE    
  INTEGER 0..100  

stormBcastControlDisables 1.3.6.1.4.1.343.2.11.1.2.24.1.1.5
The number of times this port entered the discard state as a result of storm control.
OBJECT-TYPE    
  INTEGER  

stormBcastControlEnables 1.3.6.1.4.1.343.2.11.1.2.24.1.1.6
The number of times this port exited the discard state as a result of storm control.
OBJECT-TYPE    
  INTEGER  

stormBcastControlTimeLeft 1.3.6.1.4.1.343.2.11.1.2.24.1.1.7
The number of seconds remaining until this port will exit the discard state.
OBJECT-TYPE    
  INTEGER 0..256  

stormBcastControlStatus 1.3.6.1.4.1.343.2.11.1.2.24.1.1.8
The current status of this port with respect to storm control. If the port is in the discarding state, then writing 'exitDiscardState' to stormBcastControlStatus will cause the port to exit the discarding state. No other value may be written to this object.
OBJECT-TYPE    
  INTEGER disabled(1), monitorBroadcast(2), monitorMulticast(3), monitorBoth(4), discardingBroadcast(5), discardingMulticast(6), exitDiscardState(7)  

stormMcastControlTable 1.3.6.1.4.1.343.2.11.1.2.24.2
Table containing configuration and status information for multicast storm control.
OBJECT-TYPE    
  SEQUENCE OF  
    StormMcastControlEntry

stormMcastControlEntry 1.3.6.1.4.1.343.2.11.1.2.24.2.1
Configuration and status for multicast storm control.
OBJECT-TYPE    
  StormMcastControlEntry  

stormMcastControlPort 1.3.6.1.4.1.343.2.11.1.2.24.2.1.1
The port number on the switch, equivalent to ifIndex.
OBJECT-TYPE    
  INTEGER 1..1024  

stormMcastControlThreshold 1.3.6.1.4.1.343.2.11.1.2.24.2.1.2
The multicast frame rate, in percent of total bandwidth, at which discarding is triggered for this port.
OBJECT-TYPE    
  INTEGER 1..100  

stormMcastControlDiscardPeriod 1.3.6.1.4.1.343.2.11.1.2.24.2.1.3
The amount of time, in seconds, that discarding will continue on this port once triggered. If the discard period is set to zero seconds and the port transitions to discarding state, then user intervention is required to remove the port from discarding state.
OBJECT-TYPE    
  INTEGER 0..256  

stormMcastControlRate 1.3.6.1.4.1.343.2.11.1.2.24.2.1.4
The current multicast rate, measured as a precentage of total bandwidth, for this port.
OBJECT-TYPE    
  INTEGER 0..100  

stormMcastControlDisables 1.3.6.1.4.1.343.2.11.1.2.24.2.1.5
The number of times this port entered the discard state as a result of storm control.
OBJECT-TYPE    
  INTEGER  

stormMcastControlEnables 1.3.6.1.4.1.343.2.11.1.2.24.2.1.6
The number of times this port exited the discard state as a result of storm control.
OBJECT-TYPE    
  INTEGER  

stormMcastControlTimeLeft 1.3.6.1.4.1.343.2.11.1.2.24.2.1.7
The number of seconds remaining until this port will exit the discard state.
OBJECT-TYPE    
  INTEGER 0..256  

stormMcastControlStatus 1.3.6.1.4.1.343.2.11.1.2.24.2.1.8
The current status of this port with respect to storm control. If the port is in the discarding state, then writing 'exitDiscardState' to stormMcastControlStatus will cause the port to exit the discarding state. No other value may be written to this object.
OBJECT-TYPE    
  INTEGER disabled(1), monitorBroadcast(2), monitorMulticast(3), monitorBoth(4), discardingBroadcast(5), discardingMulticast(6), exitDiscardState(7)  

igmpSnoopingEnable 1.3.6.1.4.1.343.2.11.1.2.25.1
Enable or disable IGMP snooping for system.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpSnoopingResetControl 1.3.6.1.4.1.343.2.11.1.2.25.2
Reset all control ports in the system to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

igmpSnoopingResetData 1.3.6.1.4.1.343.2.11.1.2.25.3
Reset all data ports in the system to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

igmpSnoopingAgeTime 1.3.6.1.4.1.343.2.11.1.2.25.4
Set the snoop aging time.
OBJECT-TYPE    
  TimeInterval 330..550  

igmpSnoopingVlanResetTable 1.3.6.1.4.1.343.2.11.1.2.25.5
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingVlanResetEntry

igmpSnoopingVlanResetEntry 1.3.6.1.4.1.343.2.11.1.2.25.5.1
Tok_String
OBJECT-TYPE    
  IgmpSnoopingVlanResetEntry  

igmpSnoopingVlanResetVlanId 1.3.6.1.4.1.343.2.11.1.2.25.5.1.1
Vlan identifier.
OBJECT-TYPE    
  VlanId  

igmpSnoopingVlanResetData 1.3.6.1.4.1.343.2.11.1.2.25.5.1.2
Reset all data ports in the vlan to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

igmpSnoopingVlanResetControl 1.3.6.1.4.1.343.2.11.1.2.25.5.1.3
Reset all control ports in the vlan to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

igmpSnoopingDataPortTable 1.3.6.1.4.1.343.2.11.1.2.25.6
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingDataPortEntry

igmpSnoopingDataPortEntry 1.3.6.1.4.1.343.2.11.1.2.25.6.1
Tok_String
OBJECT-TYPE    
  IgmpSnoopingDataPortEntry  

igmpSnoopingDataPortVlanId 1.3.6.1.4.1.343.2.11.1.2.25.6.1.1
Vlan identifier.
OBJECT-TYPE    
  VlanId  

igmpSnoopingDataPortNumber 1.3.6.1.4.1.343.2.11.1.2.25.6.1.2
External port number. This number corresponds to the ifTable ifIndex.
OBJECT-TYPE    
  PortNumber  

igmpSnoopingDataPortGroup 1.3.6.1.4.1.343.2.11.1.2.25.6.1.3
All --all multicast forbidden or forwarded Ip --specified ip forbidden or forwarded
OBJECT-TYPE    
  INTEGER all(1), ip(2)  

igmpSnoopingDataPortIpAddr 1.3.6.1.4.1.343.2.11.1.2.25.6.1.4
Multicast IP Address fixed or forbidden, if data port group ip=2
OBJECT-TYPE    
  IpAddress  

igmpSnoopingDataPortState 1.3.6.1.4.1.343.2.11.1.2.25.6.1.5
Normal --default value. Fixed --Permanent group assignement Forbid --Never in the defined group assignment. Write fixed(4) or forbid(5) to this object to create a new row or modify an existing row. Write normal(3) to this object to remove an existing row.
OBJECT-TYPE    
  INTEGER normal(3), fixed(4), forbid(5)  

igmpSnoopingControlPortTable 1.3.6.1.4.1.343.2.11.1.2.25.7
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingControlPortEntry

igmpSnoopingControlPortEntry 1.3.6.1.4.1.343.2.11.1.2.25.7.1
Tok_String
OBJECT-TYPE    
  IgmpSnoopingControlPortEntry  

igmpSnoopingControlPortVlanId 1.3.6.1.4.1.343.2.11.1.2.25.7.1.1
Vlan Identifier.
OBJECT-TYPE    
  VlanId  

igmpSnoopingControlPortNumber 1.3.6.1.4.1.343.2.11.1.2.25.7.1.2
External port number. This number corresponds to the ifTable ifIndex.
OBJECT-TYPE    
  PortNumber  

igmpSnoopingControlPortState 1.3.6.1.4.1.343.2.11.1.2.25.7.1.3
Normal --control port based on protocol snooping Fixed --always a control port Forbid --never a control port.
OBJECT-TYPE    
  INTEGER normal(1), fixed(2), forbid(3)  

igmpSnoopingControlPortRowStatus 1.3.6.1.4.1.343.2.11.1.2.25.7.1.4
Used to control creation and deletion of rows.
OBJECT-TYPE    
  RowStatus  

igmpSnoopingStatusTable 1.3.6.1.4.1.343.2.11.1.2.25.8
Table of entries for reporting IGMP snooping status with Mac address to Port address mapping
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingStatusEntry

igmpSnoopingStatusEntry 1.3.6.1.4.1.343.2.11.1.2.25.8.1
Tok_String
OBJECT-TYPE    
  IgmpSnoopingStatusEntry  

igmpSnoopingVlanId 1.3.6.1.4.1.343.2.11.1.2.25.8.1.1
Vlan identifier.
OBJECT-TYPE    
  VlanId  

igmpSnoopingMcastMacAddr 1.3.6.1.4.1.343.2.11.1.2.25.8.1.2
Multicast mac address.
OBJECT-TYPE    
  MacAddress  

igmpSnoopingPort 1.3.6.1.4.1.343.2.11.1.2.25.8.1.3
External port number. This number corresponds to the ifTable ifIndex.
OBJECT-TYPE    
  PortNumber  

igmpSnoopingIpStatusTable 1.3.6.1.4.1.343.2.11.1.2.25.9
Table of entries for reporting IGMP snooping status with Mac address to Ip address mapping
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopingIpStatusEntry

igmpSnoopingIpStatusEntry 1.3.6.1.4.1.343.2.11.1.2.25.9.1
Tok_String
OBJECT-TYPE    
  IgmpSnoopingIpStatusEntry  

igmpSnoopingIpVlanId 1.3.6.1.4.1.343.2.11.1.2.25.9.1.1
Vlan identifier.
OBJECT-TYPE    
  VlanId  

igmpSnoopingIpMcastMacAddr 1.3.6.1.4.1.343.2.11.1.2.25.9.1.2
Multicast mac address.
OBJECT-TYPE    
  MacAddress  

igmpSnoopingIpAddress 1.3.6.1.4.1.343.2.11.1.2.25.9.1.3
Multicast IP address. There can be several of these for each multicast mac address.
OBJECT-TYPE    
  IpAddress  

pvstpTable 1.3.6.1.4.1.343.2.11.1.2.26.1
Per Vlan Spanning Tree Protocol Table.
OBJECT-TYPE    
  SEQUENCE OF  
    PvstpEntry

pvstpEntry 1.3.6.1.4.1.343.2.11.1.2.26.1.1
Information about an instance of a spanning tree for the specified vlan. All time (TimeTic, Timeout) values are in hundreths of a second.
OBJECT-TYPE    
  PvstpEntry  

pvstpVlanId 1.3.6.1.4.1.343.2.11.1.2.26.1.1.1
Vlan Identifier.
OBJECT-TYPE    
  VlanId  

pvstpProtocolSpecification 1.3.6.1.4.1.343.2.11.1.2.26.1.1.2
What spanning tree protocol is being run. ieee8021w1s1 indicates the version 1.0 implementation of 802.1w and 802.1s.
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3), ieee8021w1s1(4)  

pvstpPriority 1.3.6.1.4.1.343.2.11.1.2.26.1.1.3
The first 2 octets of the bridge identifier.
OBJECT-TYPE    
  INTEGER 0..65535  

pvstpTimeSinceTopologyChange 1.3.6.1.4.1.343.2.11.1.2.26.1.1.4
Time since topology change.
OBJECT-TYPE    
  TimeTicks  

pvstpTopChanges 1.3.6.1.4.1.343.2.11.1.2.26.1.1.5
Number of topology changes detected.
OBJECT-TYPE    
  Counter  

pvstpDesignatedRoot 1.3.6.1.4.1.343.2.11.1.2.26.1.1.6
The current root of the spanning tree.
OBJECT-TYPE    
  BridgeId  

pvstpRootCost 1.3.6.1.4.1.343.2.11.1.2.26.1.1.7
Tok_String
OBJECT-TYPE    
  INTEGER  

pvstpRootPort 1.3.6.1.4.1.343.2.11.1.2.26.1.1.8
Total cost to the root.
OBJECT-TYPE    
  INTEGER  

pvstpMaxAge 1.3.6.1.4.1.343.2.11.1.2.26.1.1.9
Timeout on stp information.
OBJECT-TYPE    
  Timeout  

pvstpHelloTime 1.3.6.1.4.1.343.2.11.1.2.26.1.1.10
Configuration message interval.
OBJECT-TYPE    
  Timeout  

pvstpHoldTime 1.3.6.1.4.1.343.2.11.1.2.26.1.1.11
Minimum interval between transmition of configuration messages.
OBJECT-TYPE    
  INTEGER  

pvstpForwardDelay 1.3.6.1.4.1.343.2.11.1.2.26.1.1.12
Length of time spent in each state.
OBJECT-TYPE    
  Timeout  

pvstpBridgeMaxAge 1.3.6.1.4.1.343.2.11.1.2.26.1.1.13
Value in hundredths of seconds which all bridges use for max age when this bridge is a root. Actual resolution is one second.
OBJECT-TYPE    
  Timeout 6..40  

pvstpBridgeHelloTime 1.3.6.1.4.1.343.2.11.1.2.26.1.1.14
Value to used for hello time when this bridge is a root.
OBJECT-TYPE    
  Timeout 1..10  

pvstpBridgeForwardDelay 1.3.6.1.4.1.343.2.11.1.2.26.1.1.15
Value used for forward delay when this bridge is a root.
OBJECT-TYPE    
  Timeout 4..30  

pvstpBridgeRapid 1.3.6.1.4.1.343.2.11.1.2.26.1.1.16
When spanType is pvstp, turns Spanning Tree Rapid Reconfiguration ON/OFF for the vlan.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

pvstpBridgeId 1.3.6.1.4.1.343.2.11.1.2.26.1.1.17
The Bridge ID in use for this VLAN.
OBJECT-TYPE    
  BridgeId  

pvstpPortTable 1.3.6.1.4.1.343.2.11.1.2.26.2
Per Vlan Spanning Tree Protocol Port Table.
OBJECT-TYPE    
  SEQUENCE OF  
    PvstpPortEntry

pvstpPortEntry 1.3.6.1.4.1.343.2.11.1.2.26.2.1
Information about a specific port for an instance of a spanning tree for the specified vlan. All time (TimeTic, Timeout) values are in hundreths of a second.
OBJECT-TYPE    
  PvstpPortEntry  

pvstpPortVlanId 1.3.6.1.4.1.343.2.11.1.2.26.2.1.1
Vlan identifier.
OBJECT-TYPE    
  VlanId  

pvstpPort 1.3.6.1.4.1.343.2.11.1.2.26.2.1.2
External port number. This number corresponds to the ifTable ifIndex.
OBJECT-TYPE    
  PortNumber  

pvstpPortPriority 1.3.6.1.4.1.343.2.11.1.2.26.2.1.3
The value of the priority field.
OBJECT-TYPE    
  INTEGER 0..255  

pvstpPortState 1.3.6.1.4.1.343.2.11.1.2.26.2.1.4
The port state defined by the application of the spanning tree protocol.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

pvstpPortEnable 1.3.6.1.4.1.343.2.11.1.2.26.2.1.5
The enabled/disabled status of the port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pvstpPortPathCost 1.3.6.1.4.1.343.2.11.1.2.26.2.1.6
The contribution of the port to the path cost. Actual cost ranges from 1 to 65535. Zero is a magic number which sets the cost automatically.
OBJECT-TYPE    
  INTEGER 0..65535  

pvstpPortDesignatedRoot 1.3.6.1.4.1.343.2.11.1.2.26.2.1.7
The bridge identifier of the current root, as transmitted by the current designated bridge for the segment.
OBJECT-TYPE    
  BridgeId  

pvstpPortDesignatedCost 1.3.6.1.4.1.343.2.11.1.2.26.2.1.8
Path cost for the designated port.
OBJECT-TYPE    
  INTEGER  

pvstpPortDesignatedBridge 1.3.6.1.4.1.343.2.11.1.2.26.2.1.9
Bridge identifier of the bridge which this port see as the designated bridge for the segment.
OBJECT-TYPE    
  BridgeId  

pvstpPortDesignatedPort 1.3.6.1.4.1.343.2.11.1.2.26.2.1.11
Port identifer of the port on the designated bridge for the segment.
OBJECT-TYPE    
  OCTET STRING Size(2)  

pvstpPortForwardTransitions 1.3.6.1.4.1.343.2.11.1.2.26.2.1.12
The number of times the port has transitioned from learning to forwarding state.
OBJECT-TYPE    
  Counter  

pvstpPortQuick 1.3.6.1.4.1.343.2.11.1.2.26.2.1.13
When spanType is pvstp, turns quick port reconfiguration ON/OFF for the port.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

pvstpPortAuto 1.3.6.1.4.1.343.2.11.1.2.26.2.1.14
Path cost is either Fixed or Auto. If Auto, cost is calculated automatically, and depends on media data rates and link aggregation.
OBJECT-TYPE    
  INTEGER fixed(1), auto(2)  

relayEnable 1.3.6.1.4.1.343.2.11.1.2.27.1
Enabled-disabled status of BOOTP/DHCP relay agent.
OBJECT-TYPE    
  EnableStatus  

relayMaxHops 1.3.6.1.4.1.343.2.11.1.2.27.2
Number of hops for the discard threshold for the BOOTP/DHCP relay agent.
OBJECT-TYPE    
  INTEGER 1..16  

relayServerTable 1.3.6.1.4.1.343.2.11.1.2.27.3
BOOTP/DHCP Relay Server Table.
OBJECT-TYPE    
  SEQUENCE OF  
    RelayServerEntry

relayServerEntry 1.3.6.1.4.1.343.2.11.1.2.27.3.1
Each BOOTP/DHCP server entry consists of a server index and an IP address.
OBJECT-TYPE    
  RelayServerEntry  

relayServerIndex 1.3.6.1.4.1.343.2.11.1.2.27.3.1.1
Index of a BOOTP/DHCP relay server IP address.
OBJECT-TYPE    
  INTEGER 1..8  

relayServerAddress 1.3.6.1.4.1.343.2.11.1.2.27.3.1.2
IP address of a BOOTP/DHCP relay server.
OBJECT-TYPE    
  IpAddress  

portMirrorTable 1.3.6.1.4.1.343.2.11.1.2.29.1
Port Mirror Table Table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortMirrorEntry

portMirrorEntry 1.3.6.1.4.1.343.2.11.1.2.29.1.1
Information which defines which ports are currently being mirrored.
OBJECT-TYPE    
  PortMirrorEntry  

portMirrorSourcePort 1.3.6.1.4.1.343.2.11.1.2.29.1.1.1
Port number of port being mirrored.
OBJECT-TYPE    
  PortNumber  

portMirrorMonitorPort 1.3.6.1.4.1.343.2.11.1.2.29.1.1.2
Port number of the monitor port.
OBJECT-TYPE    
  PortNumber  

portMirrorRowStatus 1.3.6.1.4.1.343.2.11.1.2.29.1.1.3
Used to control creation and deletion of rows.
OBJECT-TYPE    
  RowStatus  

ipAccessCtlTable 1.3.6.1.4.1.343.2.11.1.2.30.1
IP Access Control Table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpAccessCtlEntry

ipAccessCtlEntry 1.3.6.1.4.1.343.2.11.1.2.30.1.1
Information which defines the rules for IP Access Control.
OBJECT-TYPE    
  IpAccessCtlEntry  

ipAccessCtlRuleNumber 1.3.6.1.4.1.343.2.11.1.2.30.1.1.1
Rule number.
OBJECT-TYPE    
  INTEGER 1..1024  

ipAccessCtlSourceAddress 1.3.6.1.4.1.343.2.11.1.2.30.1.1.2
Source IP address of rule.
OBJECT-TYPE    
  IpAddress  

ipAccessCtlSourceMask 1.3.6.1.4.1.343.2.11.1.2.30.1.1.3
Source IP mask of rule.
OBJECT-TYPE    
  IpAddress  

ipAccessCtlDestinationAddress 1.3.6.1.4.1.343.2.11.1.2.30.1.1.4
Destination IP address of rule.
OBJECT-TYPE    
  IpAddress  

ipAccessCtlDestinationMask 1.3.6.1.4.1.343.2.11.1.2.30.1.1.5
Destination IP mask of rule.
OBJECT-TYPE    
  IpAddress  

ipAccessCtlType 1.3.6.1.4.1.343.2.11.1.2.30.1.1.6
Type of rule.
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipAccessCtlRowStatus 1.3.6.1.4.1.343.2.11.1.2.30.1.1.7
Rule status.
OBJECT-TYPE    
  RowStatus  

ipAccessCtlEnable 1.3.6.1.4.1.343.2.11.1.2.30.2
Enabled-disabled status of IP Access Control.
OBJECT-TYPE    
  EnableStatus  

fdbLearningMode 1.3.6.1.4.1.343.2.11.1.2.31.1
FDB learning mode; either Independent VLAN Learning(IVL), or Shared VLAN Learning(SVL).
OBJECT-TYPE    
  INTEGER ivl(1), svl(2)  

fdbAgeTable 1.3.6.1.4.1.343.2.11.1.2.31.2
Forwarding database aging information.
OBJECT-TYPE    
  SEQUENCE OF  
    FdbAgeEntry

fdbAgeEntry 1.3.6.1.4.1.343.2.11.1.2.31.2.1
FDB aging information.
OBJECT-TYPE    
  FdbAgeEntry  

fdbAgeId 1.3.6.1.4.1.343.2.11.1.2.31.2.1.1
FDB ID for this entry. In IVL mode, this object is equivalent to the VLAN ID. In SVL mode, this object is one for all entries.
OBJECT-TYPE    
  VlanId  

fdbAgeStatus 1.3.6.1.4.1.343.2.11.1.2.31.2.1.2
Enable(1) or disable(2) aging. In SVL Mode, this object controls aging for the entire FDB. In IVL Mode, this object controls aging on a per-VLAN basis.
OBJECT-TYPE    
  EnableStatus  

fdbAgeTime 1.3.6.1.4.1.343.2.11.1.2.31.2.1.3
Aging time for layer-2 entries. In SVL Mode, this object controls aging for the entire FDB. In IVL Mode, this object controls aging on a per-VLAN basis.
OBJECT-TYPE    
  INTEGER 10..32767  

carrierCPSlotChangeEvent 1
The master CP board has changed from slotA to slotB or vice-versa.
TRAP-TYPE    

carrierStatusAChangeEvent 2
The status (inserted/running) of the CP in slot A has changed.
TRAP-TYPE    

carrierStatusBChangeEvent 3
The status (inserted/running) of the CP in slot B has changed.
TRAP-TYPE    

mediaCardChangeEvent 4
One or more of the media cards has been inserted or removed.
TRAP-TYPE    

fanFailEvent 5
One or more the fans has failed.
TRAP-TYPE    

powerSupplyFailEvent 6
One or more of the power supplies has failed.
TRAP-TYPE    

highTemperatureEvent 7
The temperature has exceeded the high temperature mark; the switch is shutting down immediately.
TRAP-TYPE    

risingTemperatureEvent 8
The temperature of the switch is rising. If the temperature continues to rise, the switch will shut down.
TRAP-TYPE    

fallingTemperatureEvent 9
The temperature of the switch was dangerously high, but now the temperature has fallen back into the normal operating range.
TRAP-TYPE    

stormBcastControlDiscardEvent 10
The broadcast framerate on this port has exceeded the threshold level set by the user. The storm control software has put this port into frame discard mode.
TRAP-TYPE    

stormMcastControlDiscardEvent 11
The multicast framerate on this port has exceeded the threshold level set by the user. The storm control software has put this port into frame discard mode.
TRAP-TYPE