ISDN-OPT-MIB

File: ISDN-OPT-MIB.mib (49815 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

IsgVGIsdnCfgChanTableEntry  
SEQUENCE    
  isgVGIsdnCfgEntryNum INTEGER
  isgVGIsdnCfgChanType INTEGER
  isgVGIsdnCfgDChanPort INTEGER
  isgVGIsdnCfgSwitchType INTEGER
  isgVGIsdnCfgDChanTEI INTEGER
  isgVGIsdnCfgDPckTraffic INTEGER
  isgVGIsdnCfgDChanDN DisplayString
  isgVGIsdnCfgDSPID DisplayString
  isgVGIsdnCfgFirstBChanPort INTEGER
  isgVGIsdnCfgFirstAccType INTEGER
  isgVGIsdnCfgFirstCallDisablSTm DisplayString
  isgVGIsdnCfgFirstCallEnablSTm DisplayString
  isgVGIsdnCfgFirstSPBU INTEGER
  isgVGIsdnCfgFirstSPBUOpt DisplayString
  isgVGIsdnCfgFirstSPBUTmOut INTEGER
  isgVGIsdnCfgFirstRate INTEGER
  isgVGIsdnCfgFirstTEI INTEGER
  isgVGIsdnCfgFirstSPID DisplayString
  isgVGIsdnCfgFirstDN DisplayString
  isgVGIsdnCfgFirstSubAddr DisplayString
  isgVGIsdnCfgFirstOutDialNum1 DisplayString
  isgVGIsdnCfgFirstOutDialNum2 DisplayString
  isgVGIsdnCfgFirstDialRetryIntrvl INTEGER
  isgVGIsdnCfgFirstNumCallRetries INTEGER
  isgVGIsdnCfgSecondChanPort INTEGER
  isgVGIsdnCfgSecondAccType INTEGER
  isgVGIsdnCfgSecondCallDisablSTm DisplayString
  isgVGIsdnCfgSecondCallEnablSTm DisplayString
  isgVGIsdnCfgSecondSPBU INTEGER
  isgVGIsdnCfgSecondSPBUOpt DisplayString
  isgVGIsdnCfgSecondSPBUTmOut INTEGER
  isgVGIsdnCfgSecondRate INTEGER
  isgVGIsdnCfgSecondTEI INTEGER
  isgVGIsdnCfgSecondSPID DisplayString
  isgVGIsdnCfgSecondDN DisplayString
  isgVGIsdnCfgSecondSubAddr DisplayString
  isgVGIsdnCfgSecondOutDialNum1 DisplayString
  isgVGIsdnCfgSecondOutDialNum2 DisplayString
  isgVGIsdnCfgSecondDialRetryIntrvl INTEGER
  isgVGIsdnCfgSecondNumCallRetries INTEGER
  isgVGIsdnCfgFirstPlainOldTelSet DisplayString
  isgVGIsdnCfgFirstCallPerm DisplayString
  isgVGIsdnCfgFirstChSelect INTEGER
  isgVGIsdnCfgSecondPlainOldTelSet DisplayString
  isgVGIsdnCfgSecondCallPerm DisplayString
  isgVGIsdnCfgSecondChSelect INTEGER

IsgVGIsdnCCStatsTblEntry  
SEQUENCE    
  isgVGIsdnCCStatsDSLNum INTEGER
  isgVGIsdnCCStatsChType INTEGER
  isgVGIsdnCCStatsSwtchType INTEGER
  isgVGIsdnCCStatsL1State INTEGER
  isgVGIsdnCCStatsTEI INTEGER
  isgVGIsdnCCStatsCallgAddr DisplayString
  isgVGIsdnCCStatsCalldAddr DisplayString
  isgVGIsdnCCStatsSubaddr DisplayString
  isgVGIsdnCCStatsDirection INTEGER
  isgVGIsdnCCStatsCallStatus INTEGER
  isgVGIsdnCCStatsAccType INTEGER
  isgVGIsdnCCStatsLineSpeed INTEGER
  isgVGIsdnCCStatsPortConn INTEGER
  isgVGIsdnCCStatsCauseCode INTEGER
  isgVGIsdnCCStatsCallStarted DisplayString
  isgVGIsdnCCStatsDChanStatus INTEGER
  isgVGIsdnCCStatsTrmStatus INTEGER
  isgVGIsdnCCStatsTrmTei INTEGER

IsgVGIsdnCHStatsTblEntry  
SEQUENCE    
  isgVGIsdnCHStatsDSLNum INTEGER
  isgVGIsdnCHStatsChType INTEGER
  isgVGIsdnCHStatsSession INTEGER
  isgVGIsdnCHStatsNumCalld DisplayString
  isgVGIsdnCHStatsDirection INTEGER
  isgVGIsdnCHStatsCauseCode INTEGER
  isgVGIsdnCHStatsLineSpeed INTEGER
  isgVGIsdnCHStatsAsscPort INTEGER
  isgVGIsdnCHStatsStrtTm DisplayString
  isgVGIsdnCHStatsEndTm DisplayString

IsgVGIsdnPRICCStatsTblEntry  
SEQUENCE    
  isgVGIsdnPRICCStatsDSLNum INTEGER
  isgVGIsdnPRICCStatsSwtchType INTEGER
  isgVGIsdnPRICCStatsDChannelState INTEGER

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
OBJECT IDENTIFIER    

isgIsdnCfgGroup 1.3.6.1.4.1.449.2.1.2.2.19
OBJECT IDENTIFIER    

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
OBJECT IDENTIFIER    

isgIsdnStatsGroup 1.3.6.1.4.1.449.2.1.3.2.9
OBJECT IDENTIFIER    

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

isgIsdnCtrlGroup 1.3.6.1.4.1.449.2.1.4.8
OBJECT IDENTIFIER    

isgVGIsdnCfgChanTable 1.3.6.1.4.1.449.2.1.2.2.19.1
This table contains ISDN Channel Configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    IsgVGIsdnCfgChanTableEntry

isgVGIsdnCfgChanTableEntry 1.3.6.1.4.1.449.2.1.2.2.19.1.1
An ISDN Channel Configuration Table Entry.
OBJECT-TYPE    
  SEQUENCE OF  
    IsgVGIsdnCfgChanTableEntry

isgVGIsdnCfgEntryNum 1.3.6.1.4.1.449.2.1.2.2.19.1.1.1
This indicates the Channel Configuration Table Entry Number.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgChanType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.2
ISDN Channel Type.
OBJECT-TYPE    
  INTEGER isdnNone(1), isdnD(2), isdnB1(3), isdnB2(4), isdn2B(5), isdnB(6)  

isgVGIsdnCfgDChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.3
The associated port for the ISDN D-channel. dchanzero : Both B channels have access type Permanent. No D Channel data. dchanone : Packet Data on D-channel (Port 1 Type = X25) or B-channel access type is Switched type. dchanfour : Packet Data on D-Channel (Port 4 Type = X25). nc : Skipped during configuration.
OBJECT-TYPE    
  INTEGER dchanzero(1), dchanone(2), dchanfour(5), nc(100)  

isgVGIsdnCfgSwitchType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.4
Specifies switch type for the central office. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese International Access ISDN. briEtsiStype : Euro ISDB BRI (NET3). briNi1Stype : National ISDN version 1. briNttStype : Japanese National ISDN. briTs013Stype : Australian National ISDN. briVnStype : France National ISDN.
OBJECT-TYPE    
  INTEGER bri1tr6Stype(2), bri5essStype(3), briDms100Stype(6), briKddStype(8), briEtsiStype(9), briNi1Stype(11), briNttStype(13), briTs013Stype(14), briVnStype(15)  

isgVGIsdnCfgDChanTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.5
The Terminal Endpoint Identifier value is provided by the service provider. The range for TEI is 0..63, 127, 255. If the Switch Type is configured as DMS-1, the possible range for TEI selection will be limited to 1..63. If TEI is configured to 255, the next valid TEI will be used and if TEI is configured to 127, automatic TEI negotiation will take place.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgDPckTraffic 1.3.6.1.4.1.449.2.1.2.2.19.1.1.6
enable : Signalling and X.25 data over the D Channel. disable : Only signalling data over the D Channel.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isgVGIsdnCfgDChanDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.7
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgDSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.8
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCfgFirstBChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.9
0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgFirst' 1-3 : The associated port whose traffic will be on the ISDN B-channel which has the call and TEI objects prefixed by `isgVGIsdnCfgFirst'.
OBJECT-TYPE    
  INTEGER 0..3  

isgVGIsdnCfgFirstAccType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.10
perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line). dov : dialed B-channel service: Circuit Mode (Data over voice).
OBJECT-TYPE    
  INTEGER perm(1), cmd(2), pmd(3), cvl(4), dov(5)  

isgVGIsdnCfgFirstCallDisablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.11
The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
OBJECT-TYPE    
  DisplayString Size(0..5)  

isgVGIsdnCfgFirstCallEnablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.12
The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
OBJECT-TYPE    
  DisplayString Size(0..5)  

isgVGIsdnCfgFirstSPBU 1.3.6.1.4.1.449.2.1.2.2.19.1.1.13
This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isgVGIsdnCfgFirstSPBUOpt 1.3.6.1.4.1.449.2.1.2.2.19.1.1.14
Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pre-configured timeout period. CALL : Based on the status of the Backup ISDN call. Any combination of the above can be specified by summing (e.g. TIMEOUT+CALL).
OBJECT-TYPE    
  DisplayString Size(3..18)  

isgVGIsdnCfgFirstSPBUTmOut 1.3.6.1.4.1.449.2.1.2.2.19.1.1.15
Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when TIMEOUT option is selected. The timeout period is a 1 minute interval.
OBJECT-TYPE    
  INTEGER 1..240  

isgVGIsdnCfgFirstRate 1.3.6.1.4.1.449.2.1.2.2.19.1.1.16
This parameter specifies the line speed for this channel. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rate Adapted to 12D8K.
OBJECT-TYPE    
  INTEGER rate64k(1), rate128k(2), rate56k(3), rate112k(4)  

isgVGIsdnCfgFirstTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.17
The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiation and 255 to use Packet D TEI.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgFirstSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.18
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCfgFirstDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.19
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgFirstSubAddr 1.3.6.1.4.1.449.2.1.2.2.19.1.1.20
Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCfgFirstOutDialNum1 1.3.6.1.4.1.449.2.1.2.2.19.1.1.21
The phone number to dial when establishing an ISDN outbound call.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgFirstOutDialNum2 1.3.6.1.4.1.449.2.1.2.2.19.1.1.22
The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgFirstDialRetryIntrvl 1.3.6.1.4.1.449.2.1.2.2.19.1.1.23
The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of 0.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgFirstNumCallRetries 1.3.6.1.4.1.449.2.1.2.2.19.1.1.24
The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of attempts.
OBJECT-TYPE    
  INTEGER 0..255  

isgVGIsdnCfgSecondChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.25
0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgSecond' 1-3 : The associated port whose traffic will be on the ISDN B-channel which has the call and TEI objects prefixed by `isgVGIsdnCfgSecond'.
OBJECT-TYPE    
  INTEGER 0..3  

isgVGIsdnCfgSecondAccType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.26
perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line). dov : dialed B-channel service: Circuit Mode (Data over voice).
OBJECT-TYPE    
  INTEGER perm(1), cmd(2), pmd(3), cvl(4), dov(5)  

isgVGIsdnCfgSecondCallDisablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.27
The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
OBJECT-TYPE    
  DisplayString Size(0..5)  

isgVGIsdnCfgSecondCallEnablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.28
The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
OBJECT-TYPE    
  DisplayString Size(0..5)  

isgVGIsdnCfgSecondSPBU 1.3.6.1.4.1.449.2.1.2.2.19.1.1.29
This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

isgVGIsdnCfgSecondSPBUOpt 1.3.6.1.4.1.449.2.1.2.2.19.1.1.30
Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pre-configured timeout period. CALL : Based on the status of the Backup ISDN call. Any combination of the above can be specified by summing (e.g. TIMEOUT+CALL).
OBJECT-TYPE    
  DisplayString Size(3..18)  

isgVGIsdnCfgSecondSPBUTmOut 1.3.6.1.4.1.449.2.1.2.2.19.1.1.31
Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when TIMEOUT option is selected.The timeout period is a 1 minute interval.
OBJECT-TYPE    
  INTEGER 1..240  

isgVGIsdnCfgSecondRate 1.3.6.1.4.1.449.2.1.2.2.19.1.1.32
This parameter specifies the line speed for this channel. rate64k : No Adaptation rate56k : Rate Adapted to 64K.
OBJECT-TYPE    
  INTEGER rate64k(1), rate56k(3)  

isgVGIsdnCfgSecondTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.33
The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiation and 255 to use TEI selected for B1.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgSecondSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.34
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCfgSecondDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.35
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgSecondSubAddr 1.3.6.1.4.1.449.2.1.2.2.19.1.1.36
Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCfgSecondOutDialNum1 1.3.6.1.4.1.449.2.1.2.2.19.1.1.37
The phone number to dial when establishing an ISDN outbound call.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgSecondOutDialNum2 1.3.6.1.4.1.449.2.1.2.2.19.1.1.38
The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2.
OBJECT-TYPE    
  DisplayString Size(0..17)  

isgVGIsdnCfgSecondDialRetryIntrvl 1.3.6.1.4.1.449.2.1.2.2.19.1.1.39
The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of 0.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCfgSecondNumCallRetries 1.3.6.1.4.1.449.2.1.2.2.19.1.1.40
The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of attempts.
OBJECT-TYPE    
  INTEGER 0..255  

isgVGIsdnCfgFirstPlainOldTelSet 1.3.6.1.4.1.449.2.1.2.2.19.1.1.41
none: No Telephone support required pots1: Plain Old Telephone Set 1 connected
OBJECT-TYPE    
  DisplayString  

isgVGIsdnCfgFirstCallPerm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.42
out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network
OBJECT-TYPE    
  DisplayString  

isgVGIsdnCfgFirstChSelect 1.3.6.1.4.1.449.2.1.2.2.19.1.1.43
exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection
OBJECT-TYPE    
  INTEGER preferred(1), exclusive(3)  

isgVGIsdnCfgSecondPlainOldTelSet 1.3.6.1.4.1.449.2.1.2.2.19.1.1.44
none: No Telephone support required pots1: Plain Old Telephone Set 1 connected pots2: Plain Old Telephone Set 2 connected
OBJECT-TYPE    
  DisplayString  

isgVGIsdnCfgSecondCallPerm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.45
out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network
OBJECT-TYPE    
  DisplayString  

isgVGIsdnCfgSecondChSelect 1.3.6.1.4.1.449.2.1.2.2.19.1.1.46
exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection
OBJECT-TYPE    
  INTEGER preferred(1), exclusive(3)  

isgVGIsdnStats 1.3.6.1.4.1.449.2.1.3.2.9.1
OBJECT IDENTIFIER    

isgVGIsdnCCStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.1
ISDN DSL Current Call Statistics Table.
OBJECT-TYPE    
  SEQUENCE OF  
    IsgVGIsdnCCStatsTblEntry

isgVGIsdnCCStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1
Current Call Statistics Table Entries.
OBJECT-TYPE    
  IsgVGIsdnCCStatsTblEntry  

isgVGIsdnCCStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.1
Digital Service Loop Number.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCCStatsChType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.2
ISDN Channel Type.
OBJECT-TYPE    
  INTEGER dChannel(1), b1Channel(2), b2Channel(3)  

isgVGIsdnCCStatsSwtchType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.3
Switch Type. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese International Access ISDN. briEtsiStype : Euro ISDB BRI (NET3). briNi1Stype : National ISDN version 1. briNttStype : Japanese National ISDN. briTs013Stype : Australian National ISDN. briVnStype : France National ISDN. unsupported : Unsupported Switch Type.
OBJECT-TYPE    
  INTEGER bri1tr6Stype(2), bri5essStype(3), briDms100Stype(6), briKddStype(8), briEtsiStype(9), briNi1Stype(11), briNttStype(13), briTs013Stype(14), briVnStype(15), unsupported(16)  

isgVGIsdnCCStatsL1State 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.4
Level1 State. l1Setup : Setup State. l1Active : Active State. l1Deactive : Inactive State. l1B1Loop : Loop Test State. l1B2Loop : Loop Test State. l1B1B2Loop : Loop Test State. l12BDLoop : Loop Test State. unknown : Loop Test State.
OBJECT-TYPE    
  INTEGER l1Setup(1), l1Active(2), l1Deactive(3), l1B1Loop(4), l1B2Loop(5), l1B1B2Loop(6), l12BDLoop(7), unknown(8)  

isgVGIsdnCCStatsTEI 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.5
Terminal Endpoint Identifier.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCCStatsCallgAddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.6
Current Call Statistics : Calling Address.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCCStatsCalldAddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.7
Current Call Statistics : Called Address.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCCStatsSubaddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.8
Current Call Statistics : Call Subaddress.
OBJECT-TYPE    
  DisplayString Size(0..21)  

isgVGIsdnCCStatsDirection 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.9
Current Call Statistics : Call Direction. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming into Vanguard from the ISDN Network. collision : A Call collision is detected.
OBJECT-TYPE    
  INTEGER noCall(1), outgoing(2), incoming(3), collision(4)  

isgVGIsdnCCStatsAccType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.10
Current Call Statistics : Channel Access Type. permanent : Permanent B is selected. cktMode : Dialed B-channel service: Circuit Mode. pktMode : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line).
OBJECT-TYPE    
  INTEGER permanent(1), cktMode(2), pktMode(3), cvl(4), notApplicable(5)  

isgVGIsdnCCStatsCallStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.11
Current Call Statistics : Call Status. waitInit : FIT waiting for SPID registration. initFail : FIT's SPID registration has failed. termIdle : Terminal is currently idle (ready for calls). callInit : An outbound call setup is sent. discSent : A disconnect request is sent. hostProc : In Call Proc./Alert State. callConn : An outbound/inbound call is connected. notApplicable : Not applicable to this channel. This object is only applicable to B1/B2 Channels.
OBJECT-TYPE    
  INTEGER waitInit(1), initFail(2), termIdle(3), callInit(4), discSent(5), hostProc(6), callConn(7), notApplicable(8)  

isgVGIsdnCCStatsLineSpeed 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.12
Current Call Statistics : Line Speed. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rate Adapted to 12D8K.
OBJECT-TYPE    
  INTEGER rate64k(1), rate56k(2), rate0k(3)  

isgVGIsdnCCStatsPortConn 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.13
Current Call Statistics : Port number to carry this call.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCCStatsCauseCode 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.14
Current Call Statistics : Cause Code sent/received in the Q.931 message.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCCStatsCallStarted 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.15
Current Call Statistics : Call Start Time.
OBJECT-TYPE    
  DisplayString Size(0..18)  

isgVGIsdnCCStatsDChanStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.16
enabled : D channel is enabled. disabled : D channel is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

isgVGIsdnCCStatsTrmStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.17
fitWaitInit : Fully Initializing Terminal (FIT) is waiting for SPID registration. fitFailed : FIT registration failed, check alarm for cause. fitTimeout : SPID registration has timed out, waiting for retry. networkTimeout : Network is not responding to SPID registration sent. spidError : Network rejected SPID registration due to error in the ID. online : Terminal is ready for ISDN communication.
OBJECT-TYPE    
  INTEGER fitWaitInit(1), fitFailed(2), fitTimeout(3), networkTimeout(4), spiDerror(5), online(6)  

isgVGIsdnCCStatsTrmTei 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.18
Terminal (B1/B2) TEI.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCHStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.2
ISDN DSL Call History Table.
OBJECT-TYPE    
  SEQUENCE OF  
    IsgVGIsdnCHStatsTblEntry

isgVGIsdnCHStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1
ISDN DSL Call History Table Entries.
OBJECT-TYPE    
  IsgVGIsdnCHStatsTblEntry  

isgVGIsdnCHStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.1
Digital Service Loop Number.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCHStatsChType 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.2
ISDN Channel Type.
OBJECT-TYPE    
  INTEGER b1Channel(1), b2Channel(2)  

isgVGIsdnCHStatsSession 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.3
Call Session Number tracked. 0 : Most Recent call. 1 : Previous call. 2 : Oldest call.
OBJECT-TYPE    
  INTEGER 0..2  

isgVGIsdnCHStatsNumCalld 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.4
If the call is outgoing, this is the phone number that has been called. If the call is incoming, this is the number that is calling (provided the line has subscribed to Caller ID Display.
OBJECT-TYPE    
  DisplayString Size(0..31)  

isgVGIsdnCHStatsDirection 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.5
Direction of the call. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming into Vanguard from the ISDN Network. collision : A Call collision is detected.
OBJECT-TYPE    
  INTEGER noCall(1), outgoing(2), incoming(3), collision(4)  

isgVGIsdnCHStatsCauseCode 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.6
Cause Code sent/received in the Q.931 message.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCHStatsLineSpeed 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.7
Line Speed for the call. rate64k : No Adaptation rate56k : Rate Adapted to 64K rate0k : Rate Adapted to 0K.
OBJECT-TYPE    
  INTEGER rate64k(1), rate56k(2), rate0k(3)  

isgVGIsdnCHStatsAsscPort 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.8
Associated Port number to carry this call.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnCHStatsStrtTm 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.9
Call Start Time.
OBJECT-TYPE    
  DisplayString Size(0..18)  

isgVGIsdnCHStatsEndTm 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.10
Call End Time.
OBJECT-TYPE    
  DisplayString Size(0..13)  

isgVGIsdnPRICCStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.3
ISDN PRI DSL Current Call Statistics Table.
OBJECT-TYPE    
  SEQUENCE OF  
    IsgVGIsdnPRICCStatsTblEntry

isgVGIsdnPRICCStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1
PRI Current Call Statistics Table Entries.
OBJECT-TYPE    
  IsgVGIsdnPRICCStatsTblEntry  

isgVGIsdnPRICCStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.1
Digital Service Loop Number.
OBJECT-TYPE    
  INTEGER  

isgVGIsdnPRICCStatsSwtchType 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.2
Switch Type. bri1tr6Stype : German National ISDN. priNi2Stype : National ISDN version 2. pri5essStype : AT&T switch priDms100Stype : DMS 100. priNttStype : Japanese National ISDN. priTs014Stype : Australian National ISDN. priEtsiStype : Euro ISDB BRI (NET3). priQsigMStype : Master Side QSIG PBX. priQsigSStype : Slave Side QSIG PBX. priT1QsigMStype : T1 Master Side QSIG PBX. priT1QsigSStype : T1 Slave Side QSIG PBX. unsupported : Unsupported Switch Type.
OBJECT-TYPE    
  INTEGER priUnspecifiedStype(1), priNi2Stype(2), pri5essStype(3), priDms100Stype(4), priNttStype(5), priTs014Stype(6), priEtsiStype(7), priQsigMStype(8), priQsigSStype(9), priT1QsigMStype(10), priT1QsigSStype(11), unsupported(12)  

isgVGIsdnPRICCStatsDChannelState 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.3
D Channel Status. dChannelUp : D Channel Up. dChannelDown : D Channel Down. unknown : Loop Test State.
OBJECT-TYPE    
  INTEGER dChannelUp(1), dChannelDown(2), unknown(3)  

isgVGIsdnBootChannel 1.3.6.1.4.1.449.2.1.4.8.1
Boot the ISDN channels.
OBJECT-TYPE    
  INTEGER boot(1), noBoot(2)