ISD2-MIB

File: ISD2-MIB.mib (19975 bytes)

Imported modules

Imported symbols

Defined Types

Isd2SigChanEntry
SEQUENCE
	isd2SigChanIfIndex	INTEGER
	isd2SigChanL2State	Counter
	isd2SigChanCES	Counter
	isd2SigChanSAPI	Counter
	isd2SigChanCallCollisions	Counter
	isd2SigChanAddressCheckFails	Counter

Isd2DchanEntry
SEQUENCE
	isd2DchanIfIndex	INTEGER
	isd2DchanRxShort	Counter
	isd2DchanRxLong	Counter
	isd2DchanRxCRCerror	Counter
	isd2DchanRxResidual	Counter
	isd2DchanRxAborts	Counter
	isd2DchanRxOverrun	Counter
	isd2DchanRxLostSync	Counter
	isd2DchanRxBufferLack	Counter
	isd2DchanRxApplnotready	Counter
	isd2DchanRxUnknownProto	Counter
	isd2DchanTxDiscardedProto	Counter
	isd2DchanTxDiscardedData	Counter
	isd2DchanTxUnderrun	Counter
	isd2DchanTxCollision	Counter

Isd2PhysEntry
SEQUENCE
	isd2PhysIfIndex	INTEGER
	isd2PhysL1State	Counter
	isd2PhysL1Alarm	Counter

Isd2CallCtrlEntry
SEQUENCE
	isd2CallCtrlSigchanIfIndex	INTEGER
	isd2CallCtrlBchanIfIndex	INTEGER
	isd2CallCtrlLocalNumber	OCTET STRING
	isd2CallCtrlLocalSubaddr	OCTET STRING
	isd2CallCtrlRemoteNumber	OCTET STRING
	isd2CallCtrlRemoteSubaddr	OCTET STRING
	isd2CallCtrlL3State	INTEGER
	isd2CallCtrlCallRef	INTEGER
	isd2CallCtrlChannelNum	INTEGER
	isd2CallCtrlOutCallsConnected	Counter
	isd2CallCtrlOutCallsFailed	Counter
	isd2CallCtrlInCallsConnected	Counter
	isd2CallCtrlInCallsRefused	Counter
	isd2CallCtrlCallCollisions	Counter
	isd2CallCtrlCauseCode	INTEGER
	isd2CallCtrlLocationCode	INTEGER
	isd2CallCtrlCauseText	OCTET STRING

Defined Values

isd2		1.3.6.1.4.1.208.48
OBJECT IDENTIFIER

isd2SigChan		1.3.6.1.4.1.208.48.1
OBJECT IDENTIFIER

isd2Dchan		1.3.6.1.4.1.208.48.2
OBJECT IDENTIFIER

isd2Phys		1.3.6.1.4.1.208.48.3
OBJECT IDENTIFIER

isd2CallCtrl		1.3.6.1.4.1.208.48.4
OBJECT IDENTIFIER

isd2SigChanTable		1.3.6.1.4.1.208.48.1.1
Table containing configuration and operational parameters for all ISDN Signalling Channels on this managed device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Isd2SigChanEntry

isd2SigChanEntry		1.3.6.1.4.1.208.48.1.1.1
An entry in the ISDN Signalling Channel Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Isd2SigChanEntry

isd2SigChanIfIndex		1.3.6.1.4.1.208.48.1.1.1.1
Interface index for this signalling channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2SigChanL2State		1.3.6.1.4.1.208.48.1.1.1.2
Signalling layer-2 state (Q.921).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	teiUnassigned(1), assignAwaitTei(2), establishAwaitTei(3), teiAssigned(4), awaitEstablishment(5), awaitRelease(6), multipleFrameEstablished(7), timerRecovery(8)

isd2SigChanCES		1.3.6.1.4.1.208.48.1.1.1.3
Connection Endpoint Suffix (CES) for this signalling channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2SigChanSAPI		1.3.6.1.4.1.208.48.1.1.1.4
Service Access Point Identifier (SAPI) for this signalling channel
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2SigChanCallCollisions		1.3.6.1.4.1.208.48.1.1.1.5
The number of calls over this signalling channel which failed because of collision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2SigChanAddressCheckFails		1.3.6.1.4.1.208.48.1.1.1.6
The number of incoming calls over this signalling channel which were refused because of address mismatch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanTable		1.3.6.1.4.1.208.48.2.1
Table containing statistics for all ISDN D-Channels on this managed device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Isd2DchanEntry

isd2DchanEntry		1.3.6.1.4.1.208.48.2.1.1
An entry in the ISDN D-Channel Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Isd2DchanEntry

isd2DchanIfIndex		1.3.6.1.4.1.208.48.2.1.1.1
The Ifindex of this D-channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2DchanRxShort		1.3.6.1.4.1.208.48.2.1.1.2
The number of frames received which were discarded due to the frame length being too short.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxLong		1.3.6.1.4.1.208.48.2.1.1.3
The number of frames received which were discarded due to the frame length being too long.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxCRCerror		1.3.6.1.4.1.208.48.2.1.1.4
The number of frames received which were discarded due to Cyclic Redundancy Check (CRC) errors. This figure indicates the number of bit errors occuring over the WAN link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxResidual		1.3.6.1.4.1.208.48.2.1.1.5
The number of times the frame contained residual bits. This should not occur.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxAborts		1.3.6.1.4.1.208.48.2.1.1.6
The number of times the High-Level Data Link Control (HDLC) 'Abort' signal was received, indicating that the received packet should be ignored.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxOverrun		1.3.6.1.4.1.208.48.2.1.1.7
The number of frames which were lost due to bus overload within the router. This should not occur.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxLostSync		1.3.6.1.4.1.208.48.2.1.1.8
The number of frames which were lost due to drop of signal on the line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxBufferLack		1.3.6.1.4.1.208.48.2.1.1.9
The number of received frames which were lost due to RAM (buffer) overload within the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxApplnotready		1.3.6.1.4.1.208.48.2.1.1.10
The number of received frames which were discarded since there was a temporary situation with no upper layer to receive the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanRxUnknownProto		1.3.6.1.4.1.208.48.2.1.1.11
The number of incoming frames which were discarded due to unknown protocol field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanTxDiscardedProto		1.3.6.1.4.1.208.48.2.1.1.12
The number of protocol frames for transmission which were lost due to RAM (buffer) overload within the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanTxDiscardedData		1.3.6.1.4.1.208.48.2.1.1.13
The number of data frames for transmission which were lost due to RAM (buffer) overload within the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanTxUnderrun		1.3.6.1.4.1.208.48.2.1.1.14
The number of frames for transmission that were not successfully transmitted due to CPU (processor) overload within the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2DchanTxCollision		1.3.6.1.4.1.208.48.2.1.1.15
The number of outgoing frames which were discarded due to collisions that occured during transmission.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2PhysTable		1.3.6.1.4.1.208.48.3.1
Table containing physical layer status for all ISDN ports on this managed device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Isd2PhysEntry

isd2PhysEntry		1.3.6.1.4.1.208.48.3.1.1
An entry in the ISDN physical layer Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Isd2PhysEntry

isd2PhysIfIndex		1.3.6.1.4.1.208.48.3.1.1.1
IfIndex for this ISDN port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2PhysL1State		1.3.6.1.4.1.208.48.3.1.1.2
Physical layer state for this ISDN port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), sensing(2), deactivated(3), awaitingSignal(4), identifyingInput(5), synchronized(6), activated(7), lostFraming(8), lossOfPower(100), operational(101), fault1(102), fault2(103), fault3(104), fault4(105), powerOn(106)

isd2PhysL1Alarm		1.3.6.1.4.1.208.48.3.1.1.3
Primary Rate Interface alarm for this ISDN port. This entry is unused for BRI. 0 means noDetectedProblem
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noCableInserted(1), lossOfSignal(2), txCableNotConnected(3), alarmIndicationSignal(4), remoteAlarmIndication(5), noMultiFrameAlignment(6), noBasicFrameAlignment(7), noSyncPattern(8), ncrc4(9), crce0(10), crce1(11), ebit0(12), ebit1(13)

isd2CallCtrlTable		1.3.6.1.4.1.208.48.4.1
Table containing configuration and operational parameters for all ISDN links on this managed device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Isd2CallCtrlEntry

isd2CallCtrlEntry		1.3.6.1.4.1.208.48.4.1.1
An entry in the ISDN link Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Isd2CallCtrlEntry

isd2CallCtrlSigchanIfIndex		1.3.6.1.4.1.208.48.4.1.1.1
Interface index for the current signalling-channel associated with this link. The index is zero if no signalling-channel is associated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlBchanIfIndex		1.3.6.1.4.1.208.48.4.1.1.2
Interface index for the current B-channel associated with this link. The index is zero if no B-channel is allocated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlLocalNumber		1.3.6.1.4.1.208.48.4.1.1.3
The local ISDN number for this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(22)

isd2CallCtrlLocalSubaddr		1.3.6.1.4.1.208.48.4.1.1.4
The local ISDN subaddress for this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(14)

isd2CallCtrlRemoteNumber		1.3.6.1.4.1.208.48.4.1.1.5
The ISDN number the current or last call is or was connected to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(22)

isd2CallCtrlRemoteSubaddr		1.3.6.1.4.1.208.48.4.1.1.6
The ISDN subaddress the current or last call is or was connected to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(14)

isd2CallCtrlL3State		1.3.6.1.4.1.208.48.4.1.1.7
Signalling layer-3 state (Q.931 and custom). 0 means nullState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	callInit(1), overlapSending(2), outCallProc(3), callDelivered(4), undef5(5), callPresent(6), callReceived(7), connectRequest(8), inCallProc(9), callActive(10), disconnectRequest(11), disconnectInd(12), passiveAwaitingConf(13), callPassive(14), suspendRequest(15), undef16(16), resumeRequest(17), undef18(18), releaseRequest(19), registerRequest(20), cancelRequest(21), undef22(22), undef23(23), undef24(24), overlapReceive(25), idleState(26), establishWait(27), asaiTr1State(28), u10HoldRequest(29), u10TransferRequest(30), u10ConferenceRequest(31), u10ReconnectRequest(32), u10AwaitingDisc(33), u10CallOnHold(34), deactivated(35), reactivateRequested(36), deactivateRequested(37), ni1HoldReqU3(38), ni1HoldReqU4(39), ni1HoldReqU10(40), ni1RetrieveU3(41), ni1RetrieveU4(42), ni1RetrieveU10(43), ni1HoldActiveU3(44), ni1HoldActiveU4(45), ni1HoldActiveU10(46), broadcastState(47)

isd2CallCtrlCallRef		1.3.6.1.4.1.208.48.4.1.1.8
Signalling layer-3 call reference (Q.931).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlChannelNum		1.3.6.1.4.1.208.48.4.1.1.9
The current B-channel number associated with this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlOutCallsConnected		1.3.6.1.4.1.208.48.4.1.1.10
The number of outgoing calls on this link which were actually connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2CallCtrlOutCallsFailed		1.3.6.1.4.1.208.48.4.1.1.11
The number of outgoing calls on this link which failed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2CallCtrlInCallsConnected		1.3.6.1.4.1.208.48.4.1.1.12
The number of incoming calls on this link which were actually connected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2CallCtrlInCallsRefused		1.3.6.1.4.1.208.48.4.1.1.13
The number of incoming calls on this link which were refused.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2CallCtrlCallCollisions		1.3.6.1.4.1.208.48.4.1.1.14
The number of calls on this link which failed because of collision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

isd2CallCtrlCauseCode		1.3.6.1.4.1.208.48.4.1.1.15
The encoded network cause value associated with the last call. This object will be updated whenever a call is started or cleared. The value of this object will depend on the interface type as well as on the protocol and protocol version being used on this interface. Some references for possible cause values are given below.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlLocationCode		1.3.6.1.4.1.208.48.4.1.1.16
The encoded network cause location value associated with the last call. This object will be updated whenever a call is started or cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

isd2CallCtrlCauseText		1.3.6.1.4.1.208.48.4.1.1.17
ASCII text describing the reason for the last call termination. This object will be updated whenever a call is started or cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(100)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor