IPSEC-TUN-MON-MIB

File: IPSEC-TUN-MON-MIB.mib (62427 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
ISAKMP-DOI-IND-MON-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Unsigned32 Gauge32
OBJECT-IDENTITY experimental NOTIFICATION-TYPE
TEXTUAL-CONVENTION TruthValue InetAddressType
InetAddress IsakmpCookie

Defined Types

IpsecChanOrTunType  
A value indicating an implementation specific type for channels and tunnels. The values below are defined as examples only, and are not intended to imply any specific support or capability.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), permanent(1), transient(2), management(3)  

IpsecChannelEntry  
SEQUENCE    
  ipsecChannelType IpsecChanOrTunType
  ipsecChannelLocalEndpoint Unsigned32
  ipsecChannelRemoteEndpoint Unsigned32
  ipsecChannelCurrentSAs Gauge32
  ipsecChannelTotalSAs Counter32
  ipsecChannelDeletedSAs Counter32
  ipsecChannelTimeUpSeconds Counter32
  ipsecChannelTimeDownSeconds Counter32
  ipsecChannelInboundOctets Counter32
  ipsecChannelOutboundOctets Counter32
  ipsecChannelInboundPackets Counter32
  ipsecChannelOutboundPackets Counter32
  ipsecChannelReceiveErrors Counter32
  ipsecChannelSendErrors Counter32
  ipsecChannelCurrentTunnels Gauge32
  ipsecChannelTotalTunnels Counter32
  ipsecChannelDeletedTunnels Counter32
  ipsecChannelTunnelInboundOctets Counter64
  ipsecChannelTunnelOutboundOctets Counter64
  ipsecChannelTunnelInboundPackets Counter64
  ipsecChannelTunnelOutboundPackets Counter64
  ipsecChannelTunnelReceiveErrors Counter32
  ipsecChannelTunnelSendErrors Counter32

IpsecChannelSaEntry  
SEQUENCE    
  ipsecChannelSaIndex Unsigned32
  ipsecChannelSaLocalIpAddrType InetAddressType
  ipsecChannelSaLocalIpAddress InetAddress
  ipsecChannelSaRemoteIpAddrType InetAddressType
  ipsecChannelSaRemoteIpAddress InetAddress
  ipsecChannelSaInitiatorCookie IsakmpCookie
  ipsecChannelSaResponderCookie IsakmpCookie

IpsecChanAggEntry  
SEQUENCE    
  ipsecChanAggType IpsecChanOrTunType
  ipsecChanAggCurrentChannels Gauge32
  ipsecChanAggTotalChannels Counter32
  ipsecChanAggDeletedChannels Counter32
  ipsecChanAggInboundOctets Counter64
  ipsecChanAggOutboundOctets Counter64
  ipsecChanAggInboundPackets Counter64
  ipsecChanAggOutboundPackets Counter64
  ipsecChanAggReceiveErrors Counter32
  ipsecChanAggSendErrors Counter32
  ipsecChanAggCurrentTunnels Gauge32
  ipsecChanAggTotalTunnels Counter32
  ipsecChanAggDeletedTunnels Counter32
  ipsecChanAggTnlInboundOctets Counter64
  ipsecChanAggTnlOutboundOctets Counter64
  ipsecChanAggTnlInboundPackets Counter64
  ipsecChanAggTnlOutboundPackets Counter64
  ipsecChanAggTnlReceiveErrors Counter32
  ipsecChanAggTnlSendErrors Counter32

IpsecTunnelEntry  
SEQUENCE    
  ipsecTunnelType IpsecChanOrTunType
  ipsecTunnelId Unsigned32
  ipsecTunnelLocalIpAddrType InetAddressType
  ipsecTunnelLocalIpAddress InetAddress
  ipsecTunnelRemoteIpAddrType InetAddressType
  ipsecTunnelRemoteIpAddress InetAddress
  ipsecTunnelRemoteEndpoint Unsigned32
  ipsecTunnelLocalEndpoint Unsigned32
  ipsecTunnelCurrentSaSuites Gauge32
  ipsecTunnelTotalSaSuites Counter32
  ipsecTunnelDeletedSaSuites Counter32
  ipsecTunnelTimeUpSeconds Counter32
  ipsecTunnelTimeDownSeconds Counter32
  ipsecTunnelTotalInboundOctets Counter64
  ipsecTunnelTotalOutboundOctets Counter64
  ipsecTunnelTotalInboundPackets Counter64
  ipsecTunnelTotalOutboundPackets Counter64
  ipsecTunnelSendErrors Counter32
  ipsecTunnelReceiveErrors Counter32

IpsecTunnelSuiteEntry  
SEQUENCE    
  ipsecTunnelSuiteIndex Unsigned32
  ipsecTunnelSuiteReference OBJECT IDENTIFIER

IpsecTunAggEntry  
SEQUENCE    
  ipsecTunAggCurrentTunnels Gauge32
  ipsecTunAggTotalTunnels Counter32
  ipsecTunAggDeletedTunnels Counter32
  ipsecTunAggInboundOctets Counter64
  ipsecTunAggOutboundOctets Counter64
  ipsecTunAggInboundPackets Counter64
  ipsecTunAggOutboundPackets Counter64
  ipsecTunAggSendErrors Counter32
  ipsecTunAggReceiveErrors Counter32

TunnelBySelectorsEntry  
SEQUENCE    
  tunnelBySelectorsHash OCTET STRING
  tunnelBySelectorsIndex Unsigned32
  tunnelBySelectorsId Unsigned32
  tunnelBySelectorsType IpsecChanOrTunType
  tunnelBySelectorsRef OBJECT IDENTIFIER

Defined Values

ipsecTunMonModule 1.3.6.1.3.1010
The MIB module to describe logical IPsec channel and tunnel objects, and entity level objects and events associated with these objects.
MODULE-IDENTITY    

ipsecTunnelMonitorMIB 1.3.6.1.3.1010.1
This is the base object identifier for all branches.
Status: current Access: read-only
OBJECT-IDENTITY    

channelObjects 1.3.6.1.3.1010.1.1
This is the base object identifier for all channel related objects.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelObjects 1.3.6.1.3.1010.1.2
This is the base object identifier for all tunnel related objects.
Status: current Access: read-only
OBJECT-IDENTITY    

channelTables 1.3.6.1.3.1010.1.1.1
This is the base object identifier for all objects which are tables for channels.
Status: current Access: read-only
OBJECT-IDENTITY    

channelStats 1.3.6.1.3.1010.1.1.2
This is the base object identifier for all objects which are global (non-error) counters for channels.
Status: current Access: read-only
OBJECT-IDENTITY    

channelErrors 1.3.6.1.3.1010.1.1.3
This is the base object identifier for all objects which are global error counters for channels.
Status: current Access: read-only
OBJECT-IDENTITY    

channelTraps 1.3.6.1.3.1010.1.1.4
This is the base object identifier for all objects which are traps for channels.
Status: current Access: read-only
OBJECT-IDENTITY    

channelTrapObjects 1.3.6.1.3.1010.1.1.5
This is the base object identifier for objects which are used as part of traps for channels.
Status: current Access: read-only
OBJECT-IDENTITY    

channelTrapControl 1.3.6.1.3.1010.1.1.6
This is the base object identifier for all objects which are trap controls for channel traps.
Status: current Access: read-only
OBJECT-IDENTITY    

channelGroups 1.3.6.1.3.1010.1.1.7
This is the base object identifier for all objects which describe the groups in the channel part of this MIB.
Status: current Access: read-only
OBJECT-IDENTITY    

channelConformance 1.3.6.1.3.1010.1.1.8
This is the base object identifier for all objects which describe the conformance in the channel part of this MIB.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelTables 1.3.6.1.3.1010.1.2.1
This is the base object identifier for all objects which are tables for tunnels.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelStats 1.3.6.1.3.1010.1.2.2
This is the base object identifier for all objects which are global (non-error) counters for tunnels.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelErrors 1.3.6.1.3.1010.1.2.3
This is the base object identifier for all objects which are global error counters for tunnels.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelTraps 1.3.6.1.3.1010.1.2.4
This is the base object identifier for all objects which are traps for tunnels.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelTrapObjects 1.3.6.1.3.1010.1.2.5
This is the base object identifier for objects which are used as part of traps for tunnels.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelTrapControl 1.3.6.1.3.1010.1.2.6
This is the base object identifier for all objects which are trap controls for tunnel traps.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelGroups 1.3.6.1.3.1010.1.2.7
This is the base object identifier for all objects which describe the groups in the tunnel part of this MIB.
Status: current Access: read-only
OBJECT-IDENTITY    

tunnelConformance 1.3.6.1.3.1010.1.2.8
This is the base object identifier for all objects which describe the conformance in the tunnel part of this MIB.
Status: current Access: read-only
OBJECT-IDENTITY    

currentChannels 1.3.6.1.3.1010.1.1.2.1
The total number of channels currently in existence in the entity. This is the same as the number of rows in the channel table, whether there are IKE SAs for each row or not.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

totalChannels 1.3.6.1.3.1010.1.1.2.2
The total number of channels created by the entity since system boot. Channel creation is defined as the addition of a row to the channel table, whether an IKE SA was created at the same time or not.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

deletedChannels 1.3.6.1.3.1010.1.1.2.3
The total number of channels deleted by the entity. Channel deletion is defined as the removal of a row from the channel table, independent of the existence of the IKE SAs that may have supported it. Note that the sum of 'currentChannels' and 'deletedChannels' is equal to 'totalChannels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

currentTunnels 1.3.6.1.3.1010.1.2.2.1
The total number of tunnels currently in existence in the entity. This is the same as the number of rows in the tunnel table, whether there are IPsec SA suites for each row or not.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

totalTunnels 1.3.6.1.3.1010.1.2.2.2
The total number of tunnels created by the entity since system boot. Tunnel creation is defined as the addition of a row to the tunnel table, whether an IPsec SA was created at the same time or not.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

deletedTunnels 1.3.6.1.3.1010.1.2.2.3
The total number of tunnels deleted by the entity. Tunnel deletion is defined as the removal of a row from the tunnel table, independent of the existence of the phase 2 SA suites that may have supported it. Note that the sum of 'currentTunnels' and 'deletedTunnels' should is to 'totalTunnels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelTable 1.3.6.1.3.1010.1.1.1.1
The (conceptual) table containing information on control channels. The number of rows in this table is, at a minimum, the same as the number of IKE SAs that have the same phase 1 ID pairs. Additional rows for channels without active phase 1 SAs may also appear in the table. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecChannelEntry

ipsecChannelEntry 1.3.6.1.3.1010.1.1.1.1.1
An entry (conceptual row) containing the information on a particular control channel. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChannelEntry  

ipsecChannelType 1.3.6.1.3.1010.1.1.1.1.1.1
The type of control channel represented by this row. This is an implementation dependent value, used to assist in controlling how channels are sorted.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChanOrTunType  

ipsecChannelLocalEndpoint 1.3.6.1.3.1010.1.1.1.1.1.2
The index value of the row of the IKE Monitoring MIB's endpoint table corresponding to the local endpoint.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ipsecChannelRemoteEndpoint 1.3.6.1.3.1010.1.1.1.1.1.3
The index value of the row of the IKE Monitoring MIB's endpoint table corresponding to the remote endpoint.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ipsecChannelCurrentSAs 1.3.6.1.3.1010.1.1.1.1.1.4
The number of IKE SAs that are currently active that make up this channel. This value may be 0 if the channel has not yet been set up, or the implementation does not require the existence of IKE SAs for the channel to exist, or if the channel is considered a permanent entry in the table by the implementation. This value should not include SA establishment attempts in progress.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecChannelTotalSAs 1.3.6.1.3.1010.1.1.1.1.1.5
The total number of IKE SAs that are part of this channel that have been created in the entity since boot time. This value should not include failed SA establishment attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelDeletedSAs 1.3.6.1.3.1010.1.1.1.1.1.6
The total number of IKE SAs that are part of this channel that have been deleted in the entity since boot time. The sum of 'ipsecChannelCurrentSAs' and this value should equal ipsecChannelTotalSAs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelTimeUpSeconds 1.3.6.1.3.1010.1.1.1.1.1.7
The total number of seconds since there has been at least one valid IKE SA supporting the channel. In other words, the number of seconds since the value of 'ipsecChannelCurrentSAs' changed from 0 to any other value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelTimeDownSeconds 1.3.6.1.3.1010.1.1.1.1.1.8
The total number of seconds since the last valid IKE SA supporting the channel was deleted. In other words, the number of seconds since the value of 'ipsecChannelCurrentSAs' changed to 0 from any other value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelInboundOctets 1.3.6.1.3.1010.1.1.1.1.1.9
The amount of traffic measured in bytes received by the channel. This is the sum of 'saInOctets' from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelOutboundOctets 1.3.6.1.3.1010.1.1.1.1.1.10
The amount of traffic measured in bytes sent by the channel. This is the sum of 'saOutOctets' from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelInboundPackets 1.3.6.1.3.1010.1.1.1.1.1.11
The total number of packets received by the channel. This is the sum of 'saInPackets' from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelOutboundPackets 1.3.6.1.3.1010.1.1.1.1.1.12
The total number of packets sent by the channel. This is the sum of 'saOutPackets' from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelReceiveErrors 1.3.6.1.3.1010.1.1.1.1.1.13
The total number of receive errors incurred in the channel. This is the sum of all receive errors from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelSendErrors 1.3.6.1.3.1010.1.1.1.1.1.14
The total number of send errors incurred in the channel. This is the sum of all send errors from the 'saEntry' of each IKE SA in 'saTable' that is part of this channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelCurrentTunnels 1.3.6.1.3.1010.1.1.1.1.1.15
The number of IPsec tunnels that are currently active that were created by this channel. This value should not include tunnel establishment attempts that are in progress.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecChannelTotalTunnels 1.3.6.1.3.1010.1.1.1.1.1.16
The total number of IPsec tunnels that have been created in the entity by this channel since boot time. This value should not include failed tunnel establishment attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelDeletedTunnels 1.3.6.1.3.1010.1.1.1.1.1.17
The total number of IPsec tunnels that have been deleted by this channel in the entity since boot time. The sum of 'ipsecChannelCurrentTunnels' and this value should equal 'ipsecChannelTotalTunnels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelTunnelInboundOctets 1.3.6.1.3.1010.1.1.1.1.1.18
The amount of traffic measured in bytes received by all tunnels created by the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChannelTunnelOutboundOctets 1.3.6.1.3.1010.1.1.1.1.1.19
The amount of traffic measured in bytes sent by all tunnels created by the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChannelTunnelInboundPackets 1.3.6.1.3.1010.1.1.1.1.1.20
The total number of packets received by all tunnels created by the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChannelTunnelOutboundPackets 1.3.6.1.3.1010.1.1.1.1.1.21
The total number of packets sent by all tunnels created by the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChannelTunnelReceiveErrors 1.3.6.1.3.1010.1.1.1.1.1.22
The total number of receive errors incurred in all tunnels created by the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelTunnelSendErrors 1.3.6.1.3.1010.1.1.1.1.1.23
The total number of send errors incurred in all tunnels created the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChannelSaTable 1.3.6.1.3.1010.1.1.1.2
The (conceptual) table containing information on which IKE SAs are used in channels. The number of rows is the same as the number of IKE SAs in the entity. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecChannelSaEntry

ipsecChannelSaEntry 1.3.6.1.3.1010.1.1.1.2.1
An entry (conceptual row) containing the identifiers of a specific IKE SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChannelSaEntry  

ipsecChannelSaIndex 1.3.6.1.3.1010.1.1.1.2.1.1
A unique value, greater than zero, for each IKE SA in the channel. It is recommended that values are assigned contiguously starting from 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16777215  

ipsecChannelSaLocalIpAddrType 1.3.6.1.3.1010.1.1.1.2.1.2
The type of the local address used to negotiate the IKE SA in the channel. (The value of 'saIkeLocalIpAddressType' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

ipsecChannelSaLocalIpAddress 1.3.6.1.3.1010.1.1.1.2.1.3
The local address used to negotiate the IKE SA in the channel. (The value of 'saIkeLocalIpAddress' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16|20)  

ipsecChannelSaRemoteIpAddrType 1.3.6.1.3.1010.1.1.1.2.1.4
The type of the remote address used to negotiate the IKE SA in the channel. (The value of 'saIkeRemoteIpAddressType' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

ipsecChannelSaRemoteIpAddress 1.3.6.1.3.1010.1.1.1.2.1.5
The remote address used to negotiate the IKE SA in the channel. (The value of 'saIkeRemoteIpAddress' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16|20)  

ipsecChannelSaInitiatorCookie 1.3.6.1.3.1010.1.1.1.2.1.6
The value of the cookie used by the initiator for the IKE SA in the channel. (The value of 'saIkeInitiatorCookie' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  IsakmpCookie  

ipsecChannelSaResponderCookie 1.3.6.1.3.1010.1.1.1.2.1.7
The value of the cookie used by the responder for the IKE SA in the channel. (The value of 'saIkeResponderCookie' from 'ikeMonModule' for this row.)
Status: current Access: read-only
OBJECT-TYPE    
  IsakmpCookie  

ipsecChanAggTable 1.3.6.1.3.1010.1.1.1.3
The optional (conceptual) table containing information on aggregate statistics for the channel types. The number of rows is the same as the number of channel types supported by the entity. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecChanAggEntry

ipsecChanAggEntry 1.3.6.1.3.1010.1.1.1.3.1
An entry (conceptual row) containing the aggregate statistics for a specific channel type. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChanAggEntry  

ipsecChanAggType 1.3.6.1.3.1010.1.1.1.3.1.1
The type of control channel for which this row aggregrates statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChanOrTunType  

ipsecChanAggCurrentChannels 1.3.6.1.3.1010.1.1.1.3.1.2
The number of channels that are currently active that are of the specified type. This value should not include channel establishment attempts in progress.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecChanAggTotalChannels 1.3.6.1.3.1010.1.1.1.3.1.3
The total number of channels of this type that have been created in the entity since boot time. This value should not include failed channel establishment attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggDeletedChannels 1.3.6.1.3.1010.1.1.1.3.1.4
The total number of channels of this type that have been deleted in the entity since boot time. The sum of 'ipsecChanAggCurrentChannels' and this value should equal 'ipsecChanAggTotalChannels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggInboundOctets 1.3.6.1.3.1010.1.1.1.3.1.5
The total amount of traffic measured in bytes received by all channels of this type. This is the sum of 'ipsecChannelInboundOctets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggOutboundOctets 1.3.6.1.3.1010.1.1.1.3.1.6
The total amount of traffic measured in bytes sent by all channels of this type. This is the sum of 'ipsecChannelOutboundOctets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggInboundPackets 1.3.6.1.3.1010.1.1.1.3.1.7
The total number of packets received by all channels of this type. This is the sum of 'ipsecChannelInboundPackets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggOutboundPackets 1.3.6.1.3.1010.1.1.1.3.1.8
The total number of packets sent by all channels of this type. This is the sum of 'ipsecChannelOutboundPackets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggReceiveErrors 1.3.6.1.3.1010.1.1.1.3.1.9
The total number of receive errors incurred by all channels of this type. This is the sum of 'ipsecChannelReceiveErrors' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggSendErrors 1.3.6.1.3.1010.1.1.1.3.1.10
The total number of send errors incurred by all channels of this type. This is the sum of 'ipsecChannelSendErrors' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggCurrentTunnels 1.3.6.1.3.1010.1.1.1.3.1.11
The current number of active IPsec tunnels that have been created by all channels of this type. This is the sum of 'ipsecChannelCurrentTunnels' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecChanAggTotalTunnels 1.3.6.1.3.1010.1.1.1.3.1.12
The total number of IPsec tunnels that have been created by all channels of this type. This is the sum of 'ipsecChannelTotalTunnels' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggDeletedTunnels 1.3.6.1.3.1010.1.1.1.3.1.13
The total number of IPsec tunnels that have been deleted by all channels of this type. This is the sum of 'ipsecChannelDeletedTunnels' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type. The sum of 'ipsecChanAggCurrentTunnels' and this value should equal 'ipsecChanAggTotalTunnels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggTnlInboundOctets 1.3.6.1.3.1010.1.1.1.3.1.14
The amount of traffic measured in bytes received by all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelInboundOctets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggTnlOutboundOctets 1.3.6.1.3.1010.1.1.1.3.1.15
The amount of traffic measured in bytes sent by all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelOutboundOctets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggTnlInboundPackets 1.3.6.1.3.1010.1.1.1.3.1.16
The total number of packets received by all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelInboundPackets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggTnlOutboundPackets 1.3.6.1.3.1010.1.1.1.3.1.17
The total number of packets sent by all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelOutboundPackets' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecChanAggTnlReceiveErrors 1.3.6.1.3.1010.1.1.1.3.1.18
The total number of receive errors incurred in all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelReceiveErrors' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecChanAggTnlSendErrors 1.3.6.1.3.1010.1.1.1.3.1.19
The total number of send errors incurred in all tunnels created by all channels of this type. This is the sum of 'ipsecChannelTunnelSendErrors' from the 'ipsecChannelEntry' of each channel in 'ipsecChannelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelTable 1.3.6.1.3.1010.1.2.1.1
The (conceptual) table containing information on IPsec SA suite-based tunnels. The number of rows is, at a minimum, the same as the number of IPsec SA suites in the entity that have identical selectors. Additional rows for tunnels without active IPsec SA suites may also appear in the table. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecTunnelEntry

ipsecTunnelEntry 1.3.6.1.3.1010.1.2.1.1.1
An entry (conceptual row) containing the information on a particular tunnel. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecTunnelEntry  

ipsecTunnelType 1.3.6.1.3.1010.1.2.1.1.1.1
The type of tunnel represented by this row. This is an implementation dependent value, used to assist in controlling how tunnels are sorted.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecChanOrTunType  

ipsecTunnelId 1.3.6.1.3.1010.1.2.1.1.1.2
The index value of the selector table row that contains the selectors that are the identity of this tunnel. Specifically, this is the value of 'selectorIndex' from the appropriate row ('selectorEntry') from the table 'selectorTable' from the MIB 'ipsecMonModule'. (NOTE: Should this be an OBJECT IDENTIFIER instead?)
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ipsecTunnelLocalIpAddrType 1.3.6.1.3.1010.1.2.1.1.1.3
The type of address used by the local endpoint of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

ipsecTunnelLocalIpAddress 1.3.6.1.3.1010.1.2.1.1.1.4
The address used by the local endpoint of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16|20)  

ipsecTunnelRemoteIpAddrType 1.3.6.1.3.1010.1.2.1.1.1.5
The type of address used by the remote endpoint of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

ipsecTunnelRemoteIpAddress 1.3.6.1.3.1010.1.2.1.1.1.6
The address used by the remote endpoint of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16|20)  

ipsecTunnelLocalEndpoint 1.3.6.1.3.1010.1.2.1.1.1.7
The index of the local endpoint that negotiated this tunnel. It is the value of 'endpointIndex' from the correct row ('IkeEndpointEntry') of the 'ikeEndpointTable' from 'ikeMonModule'. (NOTE: Should this be an OBJECT IDENTIFIER instead?)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ipsecTunnelRemoteEndpoint 1.3.6.1.3.1010.1.2.1.1.1.8
The index of the remote endpoint that negotiated this tunnel. It is the value of 'endpointIndex' from the correct row ('IkeEndpointEntry') of the 'ikeEndpointTable' from 'ikeMonModule'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ipsecTunnelCurrentSaSuites 1.3.6.1.3.1010.1.2.1.1.1.9
The number of phase 2 SA suites that are currently active that make up this tunnel. This value may be 0 if the tunnel has not yet been set up, or the implementation does not require the existence of phase 2 SA suites for the tunnel to exist, or if the tunnel is considered a permanent entry in the table by the implementation. This value should not include phase 2 SA suite establishment attempts in progress.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecTunnelTotalSaSuites 1.3.6.1.3.1010.1.2.1.1.1.10
The total number of phase 2 SA suites that are part of this tunnel that have been created in the entity since boot time. This value should not include failed phase 2 SA suite establishment attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelDeletedSaSuites 1.3.6.1.3.1010.1.2.1.1.1.11
The total number of phase 2 SA suites that are part of this channel that have been deleted in the entity since boot time. The sum of 'ipsecTunnelCurrentSaSuites' and this value should equal 'ipsecTunnelTotalSaSuites'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelTimeUpSeconds 1.3.6.1.3.1010.1.2.1.1.1.12
The total number of seconds since there has been at least one valid phase 2 SA suite supporting the channel. In other words, the number of seconds since the value of 'ipsecTunnelCurrentSaSuites' changed from 0 to any other value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelTimeDownSeconds 1.3.6.1.3.1010.1.2.1.1.1.13
The total number of seconds since the last valid phase 2 SA suite supporting the channel was deleted. In other words, the number of seconds since the value of 'ipsecTunnelCurrentSaSuites' changed to 0 from any other value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelTotalInboundOctets 1.3.6.1.3.1010.1.2.1.1.1.14
The total amount of traffic measured in bytes received by the tunnel. This is the sum of 'suiteInUserOctets' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunnelTotalOutboundOctets 1.3.6.1.3.1010.1.2.1.1.1.15
The total amount of traffic measured in bytes sent by the tunnel. This is the sum of 'suiteOutUserOctets' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunnelTotalInboundPackets 1.3.6.1.3.1010.1.2.1.1.1.16
The total number of packets received by the tunnel. This is the sum of 'suiteInPackets' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunnelTotalOutboundPackets 1.3.6.1.3.1010.1.2.1.1.1.17
The total number of packets sent by the tunnel. This is the sum of 'suiteOutPackets' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunnelSendErrors 1.3.6.1.3.1010.1.2.1.1.1.18
The total number of send errors in the tunnel. This is the sum of 'suiteSendErrors' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelReceiveErrors 1.3.6.1.3.1010.1.2.1.1.1.19
The total number of receive errors in the tunnel. This is the sum of 'suiteReceiveErrors' from the 'suiteEntry' of each phase 2 SA suite in 'suiteTable' that is part of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunnelSuiteTable 1.3.6.1.3.1010.1.2.1.2
The (conceptual) table containing information on IPsec SA suites. The number of rows is the same as the number of IPsec SA suites in the entity. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecTunnelSuiteEntry

ipsecTunnelSuiteEntry 1.3.6.1.3.1010.1.2.1.2.1
An entry (conceptual row) containing the identifiers to a particular SA suite. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecTunnelSuiteEntry  

ipsecTunnelSuiteIndex 1.3.6.1.3.1010.1.2.1.2.1.1
A unique value, greater than zero, for each SA suite in the tunnel. It is recommended that values are assigned contiguously starting from 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16777215  

ipsecTunnelSuiteReference 1.3.6.1.3.1010.1.2.1.2.1.2
The object identifier of the IPsec SA suite row that represents the IPsec SA suite in the tunnel. Specifically, the value of this object is the object identifier of 'suiteIndex' of the appropriate row ('SuiteEntry') in 'suiteTable' from 'ikeMonModule'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ipsecTunAggTable 1.3.6.1.3.1010.1.2.1.3
The optional (conceptual) table containing information on aggregate statistics for the tunnel types. The number of rows is the same as the number of tunnel types supported by the entity. The maximum number of rows is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecTunAggEntry

ipsecTunAggEntry 1.3.6.1.3.1010.1.2.1.3.1
An entry (conceptual row) containing the aggregate statistics for a specific tunnel type. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsecTunAggEntry  

ipsecTunAggCurrentTunnels 1.3.6.1.3.1010.1.2.1.3.1.1
The number of tunnels that are currently active that are of the specified type. This value should not include tunnel establishment attempts in progress.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ipsecTunAggTotalTunnels 1.3.6.1.3.1010.1.2.1.3.1.2
The total number of tunnels of this type that have been created in the entity since boot time. This value should not include failed tunnel establishment attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunAggDeletedTunnels 1.3.6.1.3.1010.1.2.1.3.1.3
The total number of tunnels of this type that have been deleted in the entity since boot time. The sum of 'ipsecTunAggCurrentTunnels' and this value should equal 'ipsecTunAggTotalTunnels'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunAggInboundOctets 1.3.6.1.3.1010.1.2.1.3.1.4
The total amount of traffic measured in bytes received by all tunnels of this type. This is the sum of 'ipsecTunnelInboundOctets' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunAggOutboundOctets 1.3.6.1.3.1010.1.2.1.3.1.5
The total amount of traffic measured in bytes sent by all tunnels of this type. This is the sum of 'ipsecTunnelOutboundOctets' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunAggInboundPackets 1.3.6.1.3.1010.1.2.1.3.1.6
The total number of packets received by all tunnels of this type. This is the sum of 'ipsecTunnelInboundPackets' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunAggOutboundPackets 1.3.6.1.3.1010.1.2.1.3.1.7
The total number of packets sent by all tunnels of this type. This is the sum of 'ipsecTunnelOutboundPackets' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ipsecTunAggSendErrors 1.3.6.1.3.1010.1.2.1.3.1.8
The total number of send errors incurred by all tunnels of this type. This is the sum of 'ipsecTunnelSendErrors' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipsecTunAggReceiveErrors 1.3.6.1.3.1010.1.2.1.3.1.9
The total number of receive errors incurred by all tunnels of this type. This is the sum of 'ipsecTunnelReceiveErrors' from the 'ipsecTunnelEntry' of each tunnel in 'ipsecTunnelTable' that is of this type.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tunnelBySelectorsTable 1.3.6.1.3.1010.1.2.1.4
The (conceptual) table that sorts the tunnels by the selectors. The number of rows in this table is the same as the number of tunnels in the entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TunnelBySelectorsEntry

tunnelBySelectorsEntry 1.3.6.1.3.1010.1.2.1.4.1
An entry (conceptual row) referencing a particular tunnel. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TunnelBySelectorsEntry  

tunnelBySelectorsHash 1.3.6.1.3.1010.1.2.1.4.1.1
The hash result of the full identifer of the tunnel. Precise definition to be completed.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(4)  

tunnelBySelectorsIndex 1.3.6.1.3.1010.1.2.1.4.1.2
A unique value, greater than zero, for each tunnel in the table where the hash results of the tunnel identifiers collide. It is recommended that values are assigned contiguously starting from 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16777215  

tunnelBySelectorsId 1.3.6.1.3.1010.1.2.1.4.1.3
The identifier of the tunnel. The value of this object is the index of the selector ('selectorIndex') row ('SelectorEntry') from the 'selectorTable' that identifies this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tunnelBySelectorsType 1.3.6.1.3.1010.1.2.1.4.1.4
The type assigned to the tunnel for which this row refers.
Status: current Access: read-only
OBJECT-TYPE    
  IpsecChanOrTunType  

tunnelBySelectorsRef 1.3.6.1.3.1010.1.2.1.4.1.5
The object identifier of 'tunnelIndex' in the row ('tunnelEntry') of the 'tunnelTable' to which this row refers.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

channelTrapLocalEndpoint 1.3.6.1.3.1010.1.1.5.1
The index to an endpoint that is the local endpoint of a channel in a trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

channelTrapRemoteEndpoint 1.3.6.1.3.1010.1.1.5.2
The index to an endpoint that is the remote endpoint of a channel in a trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

tunnelTrapIdentifier 1.3.6.1.3.1010.1.2.5.1
The index to a selector that is the identifier of a tunnel in a trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

channelUpTrapEnable 1.3.6.1.3.1010.1.1.6.1
Indicates whether channelUp traps should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

channelDownTrapEnable 1.3.6.1.3.1010.1.1.6.2
Indicates whether channelDown traps should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

channelUp 1.3.6.1.3.1010.1.1.4.1
The specified channel is now up. (In other words, the number of current IKE SAs supporting the channel has changed from zero to a non-zero value.)
Status: current Access: read-write
NOTIFICATION-TYPE    

channelDown 1.3.6.1.3.1010.1.1.4.2
The specified channel is now down. (In other words, the number of current IKE SAs supporting the channel has changed to zero from a non-zero value.)
Status: current Access: read-write
NOTIFICATION-TYPE    

tunnelUpTrapEnable 1.3.6.1.3.1010.1.2.6.1
Indicates whether tunnelUp traps should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tunnelDownTrapEnable 1.3.6.1.3.1010.1.2.6.2
Indicates whether tunnelDown traps should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tunnelUp 1.3.6.1.3.1010.1.2.4.1
The specified tunnel is now up. (In other words, the number of current phase 2 SA suites supporting the tunnel has changed from zero to a non-zero value.)
Status: current Access: read-write
NOTIFICATION-TYPE    

tunnelDown 1.3.6.1.3.1010.1.2.4.2
The specified tunnel is now down. (In other words, the number of current phase 2 SA suites supporting the tunnel has changed to zero from a non-zero value.)
Status: current Access: read-write
NOTIFICATION-TYPE