IPPM-CONTROL-MIB

File: IPPM-CONTROL-MIB.mib (9312 bytes)

Imported modules

IPPM-MIB SNMPv2-SMI RMON-MIB
RMON2-MIB SNMPv2-TC SNMPv2-CONF

Imported symbols

IppmMib InstantaneousUnidirectionalConnectivity InstantaneousBidirectionalConnectivity
intervalUnidirectionalConnectivity intervalBidirectionalConnectivity intervalTemporalConnectivity
onewayDelay onewayDelayPoissonStream onewayDelayPercentile
onewayDelayMedian onewayDelayMinimum onewayDelayInversePercentile
onewayPacketLoss onewayPacketLossPoissonStream onewayPacketLossAverage
roundtripDelay roundtripDelayPoissonStream roundtripDelayPercentile
roundtripDelayMedian roundtripDelayMinimum roundtripDelayInversePercentile
MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Integer32 Counter32 experimental
OwnerString protocolDir DisplayString
TimeStamp DateAndTime TruthValue
RowStatus StorageType TEXTUAL-CONVENTION
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP

Defined Values

ippmControlMib 1.3.6.1.3.10001
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, It defines a set of NOTIFICATION-TYPE used to control IPPM metrics measures, pushing alarms and reporting the measures results.
MODULE-IDENTITY    

ippmMulticastInstantaneousMeasureSetup 1.3.6.1.3.10001.1
The definition of the setup of an instantaneous multicast measure is sent by the broadcasting application or the probe in the multicast channel using a SNMP trap defined in this NOTIFICATION-TYPE. On reception of the ippmMulticastInstantaneousMeasureSetup setup the receiver or the router: + timestamp the arrival time of the setup; + considers the following defaults values; + prepare the ippmMulticastInstantaneousMeasureReport notification; + send the report using a SNMP Inform PDU. Defaults values: IppmMeasureEntry default values: ippmMeasureName: ippmMulticastInstantaneousMeasure; ippmMeasureMetrics: { Type-P-One-way-Delay, Type-P-One-way-Packet-Loss, Type-P-Multicast-Instantaneous-Connectivity, (*) Type-P-spatial-hop-one-way-delay (*) } ippmMeasureBeginTime: 0 ippmMeasureClockPeriodUnit: 0 ippmMeasureClockPeriod: 0 ippmMeasureDurationUnit: 0 ippmMeasureDuration: 0 ippmMeasureHystorySize: 0 ippmMeasureStorageType: other ippmMeasureStatus: createAndGo IppmNetworkMeasureEntry default values: IppmNetworkMeasureClockPattern: 0 IppmNetworkMeasureTimeoutDelay: 0 ippmNetworkMeasureL3PacketSize: 0 ippmNetworkMeasureDataPattern: 0 IppmippmReportSetupEntry default values: IppmReportSetupDefinition: { onSingleton, inInformRequestPDU, clearHistory } ippmReportSetupMetricThreshold: 0 ippmReportSetupEventsDurationThreshold: 0 (*) only considered by routers.
NOTIFICATION-TYPE    

ippmMulticastInstantaneousMeasureReport 1.3.6.1.3.10001.2
This NOTIFICATION-TYPE is used by the receiver or the router to push the result of the measure performed according the ippmMulticastInstantaneousMeasureSetup setup. (*) is only applicable for router. { comment: This report definition has to be split to get one for receiver and one for router.} Note: An ippmHistoryValue is indexed using the owner, the owner index, the metric index and the timestamp (e.g.: acme.1.6.0106150820100100). So the metric index identifies which metric result (One-way-Delay, Packet- Loss, Connectivity) the ippmHistoryValue carries.
NOTIFICATION-TYPE