IPAD-MIB

File: IPAD-MIB.mib (90438 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215

Imported symbols

enterprises	IpAddress	TimeTicks
OBJECT-TYPE	DisplayString	TRAP-TYPE

Defined Types

IpadFrPortTableEntry
SEQUENCE
	ipadFrPortService	INTEGER
	ipadFrPortActive	INTEGER
	ipadFrPortLMIType	INTEGER
	ipadFrPortLMIMode	INTEGER
	ipadFrPortRxInvAlmThreshold	INTEGER
	ipadFrPortRxInvAlmAlarm	INTEGER
	ipadFrPortTxAlmThreshold	INTEGER
	ipadFrPortTxAlmAlarm	INTEGER
	ipadFrPortRxAlmThreshold	INTEGER
	ipadFrPortRxAlmAlarm	INTEGER

IpadServiceTableEntry
SEQUENCE
	ipadServiceIndex	INTEGER
	ipadServiceifIndex	INTEGER
	ipadServiceType	INTEGER
	ipadServicePair	INTEGER

IpadChannelTableEntry
SEQUENCE
	ipadChannelifIndex	INTEGER
	ipadChannelIndex	INTEGER
	ipadChannelService	INTEGER
	ipadChannelPair	INTEGER
	ipadChannelRate	INTEGER

IpadDLCITableEntry
SEQUENCE
	ipadDLCIservice	INTEGER
	ipadDLCInumber	INTEGER
	ipadDLCIactive	INTEGER
	ipadDLCIcongestion	INTEGER
	ipadDLCIremote	INTEGER
	ipadDLCIremoteUnit	DisplayString
	ipadDLCIremoteEquipActive	INTEGER
	ipadDLCIencapsulation	INTEGER
	ipadDLCIproprietary	INTEGER
	ipadDLCIpropOffset	INTEGER
	ipadDLCIinBand	INTEGER
	ipadDLCICIR	INTEGER
	ipadDLCIBe	INTEGER
	ipadDLCIminBC	INTEGER
	ipadDLCIrxMon	INTEGER
	ipadDLCIdEctrl	INTEGER
	ipadDLCIenableDelay	INTEGER
	ipadDLCItxExCIRThreshold	INTEGER
	ipadDLCItxExCIRAlarm	INTEGER
	ipadDLCItxExBeThreshold	INTEGER
	ipadDLCItxExBeAlarm	INTEGER
	ipadDLCIrxCongThreshold	INTEGER
	ipadDLCIrxCongAlarm	INTEGER
	ipadDLCIrxBECNinCIR	INTEGER
	ipadDLCIUASThreshold	INTEGER
	ipadDLCIUASAlarm	INTEGER

IpadEndpointTableEntry
SEQUENCE
	ipadEndpointIndex	INTEGER
	ipadEndpointName	DisplayString
	ipadEndpointService	INTEGER
	ipadEndpointDLCInumber	INTEGER
	ipadEndpointType	INTEGER
	ipadEndpointForward	INTEGER
	ipadEndpointBackup	INTEGER
	ipadEndpointRefSLP	INTEGER
	ipadEndpointRemoteIpAddr	IpAddress
	ipadEndpointRemoteIpMask	IpAddress

IpadUserTableEntry
SEQUENCE
	ipadUserIndex	INTEGER
	ipadUserFilterByDLCI	INTEGER
	ipadUserService	INTEGER
	ipadUserDLCI	INTEGER
	ipadUserFilterByIPAddress	INTEGER
	ipadUserIPAddress	IpAddress
	ipadUserIPMask	IpAddress
	ipadUserFilterByIPPort	INTEGER
	ipadUserIPPort	INTEGER
	ipadUserTxAlmThreshold	INTEGER
	ipadUserTxAlmAlarm	INTEGER

IpadPPPCfgTableEntry
SEQUENCE
	ipadPPPCfgService	INTEGER
	ipadPPPCfgDialMode	INTEGER
	ipadPPPCfgInactivityTimer	INTEGER
	ipadPPPCfgNegotiationInit	INTEGER
	ipadPPPCfgMRU	INTEGER
	ipadPPPCfgACCM	INTEGER
	ipadPPPCfgNegMRU	INTEGER
	ipadPPPCfgNegACCM	INTEGER
	ipadPPPCfgNegMagic	INTEGER
	ipadPPPCfgNegCompression	INTEGER
	ipadPPPCfgNegAddress	INTEGER
	ipadPPPCfgNegPAP	INTEGER
	ipadPPPCfgNegCHAP	INTEGER
	ipadPPPCfgAllowPAP	INTEGER
	ipadPPPCfgAllowCHAP	INTEGER
	ipadPPPCfgPAPUsername	DisplayString
	ipadPPPCfgPAPPassword	DisplayString
	ipadPPPCfgCHAPUsername	DisplayString
	ipadPPPCfgCHAPSecret	DisplayString
	ipadPPPCfgPortIpAddress	IpAddress
	ipadPPPCfgPeerIpAddress	IpAddress
	ipadPPPCfgNegIpAddress	INTEGER
	ipadPPPCfgNegIPCPCompression	INTEGER
	ipadPPPCfgSubnetMask	IpAddress
	ipadPPPCfgAuthChallengeInterval	INTEGER

IpadPPPPAPTableEntry
SEQUENCE
	ipadPPPPAPTableIndex	INTEGER
	ipadPPPPAPTableUsername	DisplayString
	ipadPPPPAPTablePassword	DisplayString

IpadPPPCHAPTableEntry
SEQUENCE
	ipadPPPCHAPTableIndex	INTEGER
	ipadPPPCHAPTableUsername	DisplayString
	ipadPPPCHAPTableSecret	DisplayString

IpadModemDialTableEntry
SEQUENCE
	ipadModemDialTableIndex	INTEGER
	ipadModemDialDataIndex	INTEGER
	ipadModemDialNumber	DisplayString
	ipadModemDialAbortTimer	INTEGER
	ipadModemDialRedialAttempts	INTEGER
	ipadModemDialDelayBeforeRedial	INTEGER
	ipadModemDialLoginScript	DisplayString
	ipadModemDialUsername	DisplayString
	ipadModemDialPassword	DisplayString

IpadModemDataTableEntry
SEQUENCE
	ipadModemDataTableIndex	INTEGER
	ipadModemDataModemName	DisplayString
	ipadModemDataSetupScript	DisplayString
	ipadModemDataDialingScript	DisplayString
	ipadModemDataAnswerScript	DisplayString
	ipadModemDataHangupScript	DisplayString

IpadFrPortStatsEntry
SEQUENCE
	ipadFrPortStatsService	INTEGER
	ipadFrPortStatsPeriod	INTEGER
	ipadFrPortStatsTxFrames	INTEGER
	ipadFrPortStatsRxFrames	INTEGER
	ipadFrPortStatsTxOctets	INTEGER
	ipadFrPortStatsRxOctets	INTEGER
	ipadFrPortStatsTxMgmtFrames	INTEGER
	ipadFrPortStatsRxMgmtFrames	INTEGER
	ipadFrPortStatsTxMgmtOctets	INTEGER
	ipadFrPortStatsRxMgmtOctets	INTEGER
	ipadFrPortStatsRxFECN	INTEGER
	ipadFrPortStatsRxBECN	INTEGER
	ipadFrPortStatsRxInvalid	INTEGER
	ipadFrPortStatsTxStatInq	INTEGER
	ipadFrPortStatsRxStatInq	INTEGER
	ipadFrPortStatsTxStatResp	INTEGER
	ipadFrPortStatsRxStatResp	INTEGER
	ipadFrPortStatsRxInvLMI	INTEGER
	ipadFrPortStatsPeak	INTEGER
	ipadFrPortStatsAverage	INTEGER

IpadDLCIstatsEntry
SEQUENCE
	ipadDLCIstatsService	INTEGER
	ipadDLCIstatsDLCI	INTEGER
	ipadDLCIstatsPeriod	INTEGER
	ipadDLCIstatsTxFrames	INTEGER
	ipadDLCIstatsRxFrames	INTEGER
	ipadDLCIstatsTxOctets	INTEGER
	ipadDLCIstatsRxOctets	INTEGER
	ipadDLCIstatsRxFECN	INTEGER
	ipadDLCIstatsRxBECN	INTEGER
	ipadDLCIstatsRxDE	INTEGER
	ipadDLCIstatsTxExcessCIR	INTEGER
	ipadDLCIstatsTxExcessBe	INTEGER
	ipadDLCIstatsTxMgmtFrames	INTEGER
	ipadDLCIstatsRxMgmtFrames	INTEGER
	ipadDLCIstatsTxMgmtOctets	INTEGER
	ipadDLCIstatsRxMgmtOctets	INTEGER
	ipadDLCIstatsPeak	INTEGER
	ipadDLCIstatsAverage	INTEGER
	ipadDLCIstatsDelayPeak	INTEGER
	ipadDLCIstatsDelayAverage	INTEGER
	ipadDLCIstatsRoundTripTimeouts	INTEGER
	ipadDLCIstatsUAS	INTEGER

IpadUserStatsEntry
SEQUENCE
	ipadUserStatsIndex	INTEGER
	ipadUserStatsPeriod	INTEGER
	ipadUserStatsTxFrames	INTEGER
	ipadUserStatsRxFrames	INTEGER
	ipadUserStatsTxOctets	INTEGER
	ipadUserStatsRxOctets	INTEGER
	ipadUserStatsTxRatePeak	INTEGER
	ipadUserStatsTxRateAverage	INTEGER

IpadIPTopNStatsEntry
SEQUENCE
	ipadIPTopNStatsIndex	INTEGER
	ipadIPTopNStatsAddress	OCTET STRING
	ipadIPTopNStatsTimestamp	TimeTicks
	ipadIPTopNStatsRxFrames	INTEGER
	ipadIPTopNStatsRxOctets	INTEGER
	ipadIPTopNStatsTxFrames	INTEGER
	ipadIPTopNStatsTxOctets	INTEGER

IpadPktSwCfgTableEntry
SEQUENCE
	ipadPktSwCfgService	INTEGER
	ipadPktSwCfgInterfaceType	INTEGER
	ipadPktSwCfgLnkMgmtType	INTEGER
	ipadPktSwCfgMaxFrameSize	INTEGER
	ipadPktSwCfgnN1	INTEGER
	ipadPktSwCfgnN2	INTEGER
	ipadPktSwCfgnN3	INTEGER
	ipadPktSwCfgnT1	INTEGER
	ipadPktSwCfgDefCIR	INTEGER
	ipadPktSwCfgDefExBurst	INTEGER
	ipadPktSwCfgCIREE	INTEGER
	ipadPktSwCfgLinkInjection	INTEGER
	ipadPktSwCfgAutoDiagnostic	INTEGER
	ipadPktSwCfgAutoDiscovery	INTEGER
	ipadPktSwCfgMgmtDLCI	INTEGER

IpadTrapDestTableEntry
SEQUENCE
	ipadTrapDestIndex	INTEGER
	ipadTrapDestination	IpAddress

IpadMiscPortSettingsEntry
SEQUENCE
	ipadMiscPortSettingsIndex	INTEGER
	ipadMiscPortSettingsSerialType	INTEGER

IpadSoftKeyTableEntry
SEQUENCE
	ipadSoftKeyIndex	INTEGER
	ipadSoftKeyAcronym	DisplayString
	ipadSoftKeyDescription	DisplayString
	ipadSoftKeyExpirationDate	DisplayString

Defined Values

verilink		1.3.6.1.4.1.321
OBJECT IDENTIFIER

hbu		1.3.6.1.4.1.321.100
OBJECT IDENTIFIER

ipad		1.3.6.1.4.1.321.100.1
OBJECT IDENTIFIER

ipadFrPort		1.3.6.1.4.1.321.100.1.1
OBJECT IDENTIFIER

ipadService		1.3.6.1.4.1.321.100.1.2
OBJECT IDENTIFIER

ipadChannel		1.3.6.1.4.1.321.100.1.3
OBJECT IDENTIFIER

ipadDLCI		1.3.6.1.4.1.321.100.1.4
OBJECT IDENTIFIER

ipadEndpoint		1.3.6.1.4.1.321.100.1.5
OBJECT IDENTIFIER

ipadUser		1.3.6.1.4.1.321.100.1.6
OBJECT IDENTIFIER

ipadPPP		1.3.6.1.4.1.321.100.1.7
OBJECT IDENTIFIER

ipadModem		1.3.6.1.4.1.321.100.1.8
OBJECT IDENTIFIER

ipadSvcAware		1.3.6.1.4.1.321.100.1.9
OBJECT IDENTIFIER

ipadPktSwitch		1.3.6.1.4.1.321.100.1.10
OBJECT IDENTIFIER

ipadTrapDest		1.3.6.1.4.1.321.100.1.11
OBJECT IDENTIFIER

ipadMisc		1.3.6.1.4.1.321.100.1.12
OBJECT IDENTIFIER

ipadRouter		1.3.6.1.4.1.321.100.1.13
OBJECT IDENTIFIER

ipadSoftKey		1.3.6.1.4.1.321.100.1.14
OBJECT IDENTIFIER

ipadFrPortTable		1.3.6.1.4.1.321.100.1.1.1
Table of frame relay port parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadFrPortTableEntry

ipadFrPortTableEntry		1.3.6.1.4.1.321.100.1.1.1.1
An entry in the ipad frame relay port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadFrPortTableEntry

ipadFrPortService		1.3.6.1.4.1.321.100.1.1.1.1.1
Index into the ipad frame relay port table; an entry in the ipad service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortActive		1.3.6.1.4.1.321.100.1.1.1.1.2
Specifies if the port is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadFrPortLMIType		1.3.6.1.4.1.321.100.1.1.1.1.3
Specifies the link management information type used on this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), ccitt(2), ansi(3), lmi(4), none(5)

ipadFrPortLMIMode		1.3.6.1.4.1.321.100.1.1.1.1.4
Specifies the link management information mode used on this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), sourcing(2), monitoring(3)

ipadFrPortRxInvAlmThreshold		1.3.6.1.4.1.321.100.1.1.1.1.5
Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadFrPortRxInvAlmAlarm		1.3.6.1.4.1.321.100.1.1.1.1.6
Reports if the invalid frames threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadFrPortTxAlmThreshold		1.3.6.1.4.1.321.100.1.1.1.1.7
Sets the tx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadFrPortTxAlmAlarm		1.3.6.1.4.1.321.100.1.1.1.1.8
Reports if the tx throughput threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadFrPortRxAlmThreshold		1.3.6.1.4.1.321.100.1.1.1.1.9
Sets the rx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadFrPortRxAlmAlarm		1.3.6.1.4.1.321.100.1.1.1.1.10
Reports if the rx throughput threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadServiceTable		1.3.6.1.4.1.321.100.1.2.1
The ipad service table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadServiceTableEntry

ipadServiceTableEntry		1.3.6.1.4.1.321.100.1.2.1.1
An entry in the ipad service table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadServiceTableEntry

ipadServiceIndex		1.3.6.1.4.1.321.100.1.2.1.1.1
The index for the ipad service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadServiceifIndex		1.3.6.1.4.1.321.100.1.2.1.1.2
The MIB-II ifIndex for this service.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), supervisor(1), network1(2), network2(3), user1(4), user2(5), ethernet(6)

ipadServiceType		1.3.6.1.4.1.321.100.1.2.1.1.3
The type of this service.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), tdm(2), ppp(3), pppMonitor(4), frameRelay(5), frameRelayMonitor(6), ip(7), serial(8), tty(9)

ipadServicePair		1.3.6.1.4.1.321.100.1.2.1.1.4
An entry in this table, which establishes a service pairing.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadServiceAddService		1.3.6.1.4.1.321.100.1.2.2
Adds a row to the Service Table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	addService(1)

ipadServiceDeleteService		1.3.6.1.4.1.321.100.1.2.3
Identifies a Service to be deleted; an index into the Service Table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadChannelTable		1.3.6.1.4.1.321.100.1.3.1
The ipad channel table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadChannelTableEntry

ipadChannelTableEntry		1.3.6.1.4.1.321.100.1.3.1.1
An entry in the ipad channel table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadChannelTableEntry

ipadChannelifIndex		1.3.6.1.4.1.321.100.1.3.1.1.1
Primary index into ipad channel table, MIB-II ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	supervisor(1), network1(2), network2(3), user1(4), user2(5), ethernet(6)

ipadChannelIndex		1.3.6.1.4.1.321.100.1.3.1.1.2
Channel index for the physical interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadChannelService		1.3.6.1.4.1.321.100.1.3.1.1.3
Index into service table for this channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadChannelPair		1.3.6.1.4.1.321.100.1.3.1.1.4
Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadChannelRate		1.3.6.1.4.1.321.100.1.3.1.1.5
Rate for this channel.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), rate56(2), rate64(3)

ipadDLCITable		1.3.6.1.4.1.321.100.1.4.1
The ipad DLCI table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadDLCITableEntry

ipadDLCITableEntry		1.3.6.1.4.1.321.100.1.4.1.1
An entry in the ipad DLCI table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadDLCITableEntry

ipadDLCIservice		1.3.6.1.4.1.321.100.1.4.1.1.1
An index into the ipad service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCInumber		1.3.6.1.4.1.321.100.1.4.1.1.2
The DLCI number for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIactive		1.3.6.1.4.1.321.100.1.4.1.1.3
Specifies if the DLCI is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3), pending(4)

ipadDLCIcongestion		1.3.6.1.4.1.321.100.1.4.1.1.4
Specifies if the dlci is receiving frames with FECN or BECN bit set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadDLCIremote		1.3.6.1.4.1.321.100.1.4.1.1.5
Remote DLCI number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIremoteUnit		1.3.6.1.4.1.321.100.1.4.1.1.6
Name of the remote DLCI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..11)

ipadDLCIremoteEquipActive		1.3.6.1.4.1.321.100.1.4.1.1.7
Reports if the equipment attached to the remote unit is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), inactive(2), active(3), sosAlarm(4)

ipadDLCIencapsulation		1.3.6.1.4.1.321.100.1.4.1.1.8
Type of protocol encapsulation used on this DLCI.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), rfc1490(2), proprietary(3)

ipadDLCIproprietary		1.3.6.1.4.1.321.100.1.4.1.1.9
When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), ip(2), ipx(3), ethertype(4), none(5)

ipadDLCIpropOffset		1.3.6.1.4.1.321.100.1.4.1.1.10
When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIinBand		1.3.6.1.4.1.321.100.1.4.1.1.11
Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadDLCICIR		1.3.6.1.4.1.321.100.1.4.1.1.12
Default committed information rate in bits per second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIBe		1.3.6.1.4.1.321.100.1.4.1.1.13
Default excess burst rate in bits per second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIminBC		1.3.6.1.4.1.321.100.1.4.1.1.14
If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to the network.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIrxMon		1.3.6.1.4.1.321.100.1.4.1.1.15
Determines if the SLA parameters will be monitored for received frames.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadDLCIdEctrl		1.3.6.1.4.1.321.100.1.4.1.1.16
Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadDLCIenableDelay		1.3.6.1.4.1.321.100.1.4.1.1.17
Enable or disable delay.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disable(2), enable(3)

ipadDLCItxExCIRThreshold		1.3.6.1.4.1.321.100.1.4.1.1.18
Sets the Tx over CIR alarm threshold. This threshold is the number of octets per second in excess of CIR. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCItxExCIRAlarm		1.3.6.1.4.1.321.100.1.4.1.1.19
Reports if the Tx over CIR threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadDLCItxExBeThreshold		1.3.6.1.4.1.321.100.1.4.1.1.20
Sets the Tx over Be alarm threshold. This threshold is the number of octets per second in excess of Be. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCItxExBeAlarm		1.3.6.1.4.1.321.100.1.4.1.1.21
Reports if the Tx over Be threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadDLCIrxCongThreshold		1.3.6.1.4.1.321.100.1.4.1.1.22
Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIrxCongAlarm		1.3.6.1.4.1.321.100.1.4.1.1.23
Reports if the Rx congestion threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadDLCIrxBECNinCIR		1.3.6.1.4.1.321.100.1.4.1.1.24
Reports if BECN has been received within CIR.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), alarmCondition(3)

ipadDLCIUASThreshold		1.3.6.1.4.1.321.100.1.4.1.1.25
Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadDLCIUASAlarm		1.3.6.1.4.1.321.100.1.4.1.1.26
Reports if the UAS threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadDLCILastChange		1.3.6.1.4.1.321.100.1.4.2
Time of the last change in the DLCI table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ipadEndpointTable		1.3.6.1.4.1.321.100.1.5.1
The ipad endpoint table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadEndpointTableEntry

ipadEndpointTableEntry		1.3.6.1.4.1.321.100.1.5.1.1
An entry in the ipad endpoint table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadEndpointTableEntry

ipadEndpointIndex		1.3.6.1.4.1.321.100.1.5.1.1.1
The index into the ipad endpoint table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadEndpointName		1.3.6.1.4.1.321.100.1.5.1.1.2
The name for the endpoint.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..11)

ipadEndpointService		1.3.6.1.4.1.321.100.1.5.1.1.3
An index into the ipad service table.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadEndpointDLCInumber		1.3.6.1.4.1.321.100.1.5.1.1.4
Data link connection identifier for this endpoint; The DLCI number for this entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadEndpointType		1.3.6.1.4.1.321.100.1.5.1.1.5
Endpoint type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), local(2), switched(3), ipRoute(4)

ipadEndpointForward		1.3.6.1.4.1.321.100.1.5.1.1.6
Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadEndpointBackup		1.3.6.1.4.1.321.100.1.5.1.1.7
Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadEndpointRefSLP		1.3.6.1.4.1.321.100.1.5.1.1.8
Index into the endpoint table. The service level parameters can be copied from another configured endpoint.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadEndpointRemoteIpAddr		1.3.6.1.4.1.321.100.1.5.1.1.9
IP address for remote.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadEndpointRemoteIpMask		1.3.6.1.4.1.321.100.1.5.1.1.10
IP address mask for remote.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadEndpointAddEndpoint		1.3.6.1.4.1.321.100.1.5.2
Identifies an Endpoint to be added.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..11)

ipadEndpointDeleteEndpoint		1.3.6.1.4.1.321.100.1.5.3
Identifies an Endpoint to be deleted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..11)

ipadEndpointLastChange		1.3.6.1.4.1.321.100.1.5.4
Time of the last change in the Endpoint table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ipadUserTable		1.3.6.1.4.1.321.100.1.6.1
Table of user selected parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadUserTableEntry

ipadUserTableEntry		1.3.6.1.4.1.321.100.1.6.1.1
An entry in the ipad user table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadUserTableEntry

ipadUserIndex		1.3.6.1.4.1.321.100.1.6.1.1.1
Index into the ipad user table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserFilterByDLCI		1.3.6.1.4.1.321.100.1.6.1.1.2
Enables Service+DLCI filtering for this user statistic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ipadUserService		1.3.6.1.4.1.321.100.1.6.1.1.3
Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadUserDLCI		1.3.6.1.4.1.321.100.1.6.1.1.4
Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadUserFilterByIPAddress		1.3.6.1.4.1.321.100.1.6.1.1.5
Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a transmitted packet with ipadUserIPMask equals ipadUserIPAddress.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ipadUserIPAddress		1.3.6.1.4.1.321.100.1.6.1.1.6
Specifies the IP address for this user type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadUserIPMask		1.3.6.1.4.1.321.100.1.6.1.1.7
Specifies the IP address mask for this user type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadUserFilterByIPPort		1.3.6.1.4.1.321.100.1.6.1.1.8
Enables IP Port filtering for this user statistic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

ipadUserIPPort		1.3.6.1.4.1.321.100.1.6.1.1.9
Specifies the IP port for this user type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rje(5), echo(7), systat(11), qotd(17), ftpdata(20), ftp(21), telnet(23), smtp(25), msgauth(31), time(37), nameserver(42), domain(53), sqlnet(66), tftp(69), gopher(70), finger(79), http(80), kerberos(88), npp(92), hostname(101), rtelnet(107), pop2(109), pop3(110), sunrpc(111), auth(113), nntp(119), netbiosns(137), netbiosdgm(138), netbiosssn(139), sgmp(153), snmp(161), snmptrap(162), cmipman(163), cmipagent(164), send(169), bgp(179), irc(194), atrtmp(201), atnbp(202), atecho(204), atzis(206), ipx(213), netcp(395), netwareip(396), snpp(444), povray(494), netwall(533), uucp(540), uucprlogin(541), ipcserver(600), kerberosadm(749)

ipadUserTxAlmThreshold		1.3.6.1.4.1.321.100.1.6.1.1.10
Sets the tx throughput alarm threshold in octets per second. Setting this field to 0 disables the alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadUserTxAlmAlarm		1.3.6.1.4.1.321.100.1.6.1.1.11
Reports if the tx throughput threshold has been exceeded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), noAlarm(2), thresholdExceeded(3)

ipadUserIPStatTimeRemaining		1.3.6.1.4.1.321.100.1.6.2
Specifies seconds until the next IP TopN report is generated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadUserIPStatTimeDuration		1.3.6.1.4.1.321.100.1.6.3
The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserIPStatStartTime		1.3.6.1.4.1.321.100.1.6.4
The value of SysUpTime when TimeRemaining was last set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ipadUserIPStatRequestedReportSize		1.3.6.1.4.1.321.100.1.6.5
Determines the requested maximum number of entries in the topN report.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadUserIPStatGrantedReportSize		1.3.6.1.4.1.321.100.1.6.6
Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserIPStatReportNumber		1.3.6.1.4.1.321.100.1.6.7
Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserIPStatDiscardType		1.3.6.1.4.1.321.100.1.6.8
The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an element already existing in the table must be removed. This variable determines the manner of selection. Writing byTime(1) will cause the entry with the least recent frame to be discarded. That is, all other entries in the table will have transmitted or received at least one packet more recently. Writing byFrames(2) will select the entry with the fewest transmitted or received frames. Writing byOctets(3) will select the entry with the fewest transmitted or received octets. The default is byTime(1).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	byTime(1), byFrames(2), byOctets(3)

ipadPPPCfgTable		1.3.6.1.4.1.321.100.1.7.1
The ipad PPP configuration table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadPPPCfgTableEntry

ipadPPPCfgTableEntry		1.3.6.1.4.1.321.100.1.7.1.1
An entry in the ipad PPP configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadPPPCfgTableEntry

ipadPPPCfgService		1.3.6.1.4.1.321.100.1.7.1.1.1
The index into the PPP configuration table; an entry in the ipad service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadPPPCfgDialMode		1.3.6.1.4.1.321.100.1.7.1.1.2
Determines the permancency of a communications connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), direct(2), dialup(3), demanddial(4)

ipadPPPCfgInactivityTimer		1.3.6.1.4.1.321.100.1.7.1.1.3
Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the timer is disabled.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPPPCfgNegotiationInit		1.3.6.1.4.1.321.100.1.7.1.1.4
Determines if the port waits for the other end to initiate parameter negotiations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgMRU		1.3.6.1.4.1.321.100.1.7.1.1.5
The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPPPCfgACCM		1.3.6.1.4.1.321.100.1.7.1.1.6
Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for transparency.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPPPCfgNegMRU		1.3.6.1.4.1.321.100.1.7.1.1.7
Determines if MRU size is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegACCM		1.3.6.1.4.1.321.100.1.7.1.1.8
Determines if ACCM is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegMagic		1.3.6.1.4.1.321.100.1.7.1.1.9
Determines if the magic number is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegCompression		1.3.6.1.4.1.321.100.1.7.1.1.10
Determines if the PPP protocol header compression is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegAddress		1.3.6.1.4.1.321.100.1.7.1.1.11
Determines if the PPP HDLC header compression is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegPAP		1.3.6.1.4.1.321.100.1.7.1.1.12
Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegCHAP		1.3.6.1.4.1.321.100.1.7.1.1.13
Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgAllowPAP		1.3.6.1.4.1.321.100.1.7.1.1.14
Determines if PAP is allowed to be negotiated by the peer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgAllowCHAP		1.3.6.1.4.1.321.100.1.7.1.1.15
Determines if CHAP is allowed to be negotiated by the peer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgPAPUsername		1.3.6.1.4.1.321.100.1.7.1.1.16
Identification string to determine the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCfgPAPPassword		1.3.6.1.4.1.321.100.1.7.1.1.17
Password string to validate the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCfgCHAPUsername		1.3.6.1.4.1.321.100.1.7.1.1.18
Identification string to determine the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCfgCHAPSecret		1.3.6.1.4.1.321.100.1.7.1.1.19
Password string to validate the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCfgPortIpAddress		1.3.6.1.4.1.321.100.1.7.1.1.20
Sets the IP address of the unit's port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadPPPCfgPeerIpAddress		1.3.6.1.4.1.321.100.1.7.1.1.21
Sets the IP address of the unit's peer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadPPPCfgNegIpAddress		1.3.6.1.4.1.321.100.1.7.1.1.22
Determines if IP addresses are dynamically negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgNegIPCPCompression		1.3.6.1.4.1.321.100.1.7.1.1.23
Determines if Van Jacobson TCPIP header compression is negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPPPCfgSubnetMask		1.3.6.1.4.1.321.100.1.7.1.1.24
Specifies the subnet mask.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadPPPCfgAuthChallengeInterval		1.3.6.1.4.1.321.100.1.7.1.1.25
Specifies the authentication challenge interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPPPPAPTable		1.3.6.1.4.1.321.100.1.7.2
Table of PAP authentication parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadPPPPAPTableEntry

ipadPPPPAPTableEntry		1.3.6.1.4.1.321.100.1.7.2.1
An entry in the ipad PPP PAP table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadPPPPAPTableEntry

ipadPPPPAPTableIndex		1.3.6.1.4.1.321.100.1.7.2.1.1
The index into the PPP PAP association table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadPPPPAPTableUsername		1.3.6.1.4.1.321.100.1.7.2.1.2
Identification string to identify the user.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPPAPTablePassword		1.3.6.1.4.1.321.100.1.7.2.1.3
Password string to validate the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCHAPTable		1.3.6.1.4.1.321.100.1.7.3
Table of CHAP authentication parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadPPPCHAPTableEntry

ipadPPPCHAPTableEntry		1.3.6.1.4.1.321.100.1.7.3.1
An entry in the ipad PPP CHAP table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadPPPCHAPTableEntry

ipadPPPCHAPTableIndex		1.3.6.1.4.1.321.100.1.7.3.1.1
The index into the PPP CHAP association table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadPPPCHAPTableUsername		1.3.6.1.4.1.321.100.1.7.3.1.2
Identification string to identify the user.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadPPPCHAPTableSecret		1.3.6.1.4.1.321.100.1.7.3.1.3
Password string to validate the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadModemDialTable		1.3.6.1.4.1.321.100.1.8.1
Table of modem dialing parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadModemDialTableEntry

ipadModemDialTableEntry		1.3.6.1.4.1.321.100.1.8.1.1
An entry in the ipad modem dialing parameters table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadModemDialTableEntry

ipadModemDialTableIndex		1.3.6.1.4.1.321.100.1.8.1.1.1
The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	supervisor(1), network1(2), network2(3), user1(4), user2(5), ethernet(6)

ipadModemDialDataIndex		1.3.6.1.4.1.321.100.1.8.1.1.2
An index into the Modem Data Table, which selects a modem.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadModemDialNumber		1.3.6.1.4.1.321.100.1.8.1.1.3
Specifies the telephone number to dial.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadModemDialAbortTimer		1.3.6.1.4.1.321.100.1.8.1.1.4
Aborts a connection attempt if an initialed dial-up connection has failed to connect within the specified number of seconds. Range is 1..255.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadModemDialRedialAttempts		1.3.6.1.4.1.321.100.1.8.1.1.5
Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadModemDialDelayBeforeRedial		1.3.6.1.4.1.321.100.1.8.1.1.6
Specifies the number of seconds to wait before redialing. Range is 1..255.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadModemDialLoginScript		1.3.6.1.4.1.321.100.1.8.1.1.7
Script string interpreted after a dial-up connection is first established.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ipadModemDialUsername		1.3.6.1.4.1.321.100.1.8.1.1.8
Identification string to determine the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadModemDialPassword		1.3.6.1.4.1.321.100.1.8.1.1.9
Password string to validate the user identity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..30)

ipadModemDataTable		1.3.6.1.4.1.321.100.1.8.2
Table of modem database parameters.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadModemDataTableEntry

ipadModemDataTableEntry		1.3.6.1.4.1.321.100.1.8.2.1
An entry in the ipad modem database parameters table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadModemDataTableEntry

ipadModemDataTableIndex		1.3.6.1.4.1.321.100.1.8.2.1.1
The index into the ipad modem database parameters table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadModemDataModemName		1.3.6.1.4.1.321.100.1.8.2.1.2
Identification string for the modem database.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..10)

ipadModemDataSetupScript		1.3.6.1.4.1.321.100.1.8.2.1.3
Script interpreted when a modem port is first started.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ipadModemDataDialingScript		1.3.6.1.4.1.321.100.1.8.2.1.4
Script interpreted when a dial-up connection is initiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ipadModemDataAnswerScript		1.3.6.1.4.1.321.100.1.8.2.1.5
Script interpreted when a modem port is waiting for an incoming call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ipadModemDataHangupScript		1.3.6.1.4.1.321.100.1.8.2.1.6
Script interpreted when a dial-up connection is no longer needed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..50)

ipadFrPortStatsTable		1.3.6.1.4.1.321.100.1.9.1
Port statistics.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadFrPortStatsEntry

ipadFrPortStatsEntry		1.3.6.1.4.1.321.100.1.9.1.1
An entry in the service aware ports statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadFrPortStatsEntry

ipadFrPortStatsService		1.3.6.1.4.1.321.100.1.9.1.1.1
Port index in the ipadFrPortStats table; an entry in the ipad service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsPeriod		1.3.6.1.4.1.321.100.1.9.1.1.2
The index into the port stats 24-hour table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	portStatsSummary(1), portStatsCurrent(2), portStatsperiod1(3), portStatsperiod2(4), portStatsperiod3(5), portStatsperiod4(6), portStatsperiod5(7), portStatsperiod6(8), portStatsperiod7(9), portStatsperiod8(10), portStatsperiod9(11), portStatsperiod10(12), portStatsperiod11(13), portStatsperiod12(14), portStatsperiod13(15), portStatsperiod14(16), portStatsperiod15(17), portStatsperiod16(18), portStatsperiod17(19), portStatsperiod18(20), portStatsperiod19(21), portStatsperiod20(22), portStatsperiod21(23), portStatsperiod22(24), portStatsperiod23(25), portStatsperiod24(26), portStatsperiod25(27), portStatsperiod26(28), portStatsperiod27(29), portStatsperiod28(30), portStatsperiod29(31), portStatsperiod30(32), portStatsperiod31(33), portStatsperiod32(34), portStatsperiod33(35), portStatsperiod34(36), portStatsperiod35(37), portStatsperiod36(38), portStatsperiod37(39), portStatsperiod38(40), portStatsperiod39(41), portStatsperiod40(42), portStatsperiod41(43), portStatsperiod42(44), portStatsperiod43(45), portStatsperiod44(46), portStatsperiod45(47), portStatsperiod46(48), portStatsperiod47(49), portStatsperiod48(50), portStatsperiod49(51), portStatsperiod50(52), portStatsperiod51(53), portStatsperiod52(54), portStatsperiod53(55), portStatsperiod54(56), portStatsperiod55(57), portStatsperiod56(58), portStatsperiod57(59), portStatsperiod58(60), portStatsperiod59(61), portStatsperiod60(62), portStatsperiod61(63), portStatsperiod62(64), portStatsperiod63(65), portStatsperiod64(66), portStatsperiod65(67), portStatsperiod66(68), portStatsperiod67(69), portStatsperiod68(70), portStatsperiod69(71), portStatsperiod70(72), portStatsperiod71(73), portStatsperiod72(74), portStatsperiod73(75), portStatsperiod74(76), portStatsperiod75(77), portStatsperiod76(78), portStatsperiod77(79), portStatsperiod78(80), portStatsperiod79(81), portStatsperiod80(82), portStatsperiod81(83), portStatsperiod82(84), portStatsperiod83(85), portStatsperiod84(86), portStatsperiod85(87), portStatsperiod86(88), portStatsperiod87(89), portStatsperiod88(90), portStatsperiod89(91), portStatsperiod90(92), portStatsperiod91(93), portStatsperiod92(94), portStatsperiod93(95), portStatsperiod94(96), portStatsperiod95(97), portStatsperiod96(98)

ipadFrPortStatsTxFrames		1.3.6.1.4.1.321.100.1.9.1.1.3
Number of transmitted frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxFrames		1.3.6.1.4.1.321.100.1.9.1.1.4
Number of received frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsTxOctets		1.3.6.1.4.1.321.100.1.9.1.1.5
Number of transmitted octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxOctets		1.3.6.1.4.1.321.100.1.9.1.1.6
Number of received octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsTxMgmtFrames		1.3.6.1.4.1.321.100.1.9.1.1.7
Number of transmitted management frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxMgmtFrames		1.3.6.1.4.1.321.100.1.9.1.1.8
Number of received management frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsTxMgmtOctets		1.3.6.1.4.1.321.100.1.9.1.1.9
Number of transmitted management octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxMgmtOctets		1.3.6.1.4.1.321.100.1.9.1.1.10
Number of received management octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxFECN		1.3.6.1.4.1.321.100.1.9.1.1.11
Number of received frames with FECN set for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxBECN		1.3.6.1.4.1.321.100.1.9.1.1.12
Number of received frames with BECN set for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxInvalid		1.3.6.1.4.1.321.100.1.9.1.1.13
Number of invalid received frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsTxStatInq		1.3.6.1.4.1.321.100.1.9.1.1.14
Number of transmitted status inquiry frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxStatInq		1.3.6.1.4.1.321.100.1.9.1.1.15
Number of received status inquiry frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsTxStatResp		1.3.6.1.4.1.321.100.1.9.1.1.16
Number of transmitted status response frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxStatResp		1.3.6.1.4.1.321.100.1.9.1.1.17
Number of received status response frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsRxInvLMI		1.3.6.1.4.1.321.100.1.9.1.1.18
Number of received frames with an invalid LMI for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsPeak		1.3.6.1.4.1.321.100.1.9.1.1.19
Peak throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadFrPortStatsAverage		1.3.6.1.4.1.321.100.1.9.1.1.20
Average throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTable		1.3.6.1.4.1.321.100.1.9.2
Port statistics.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadDLCIstatsEntry

ipadDLCIstatsEntry		1.3.6.1.4.1.321.100.1.9.2.1
An entry in the service aware DLCI statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadDLCIstatsEntry

ipadDLCIstatsService		1.3.6.1.4.1.321.100.1.9.2.1.1
The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsDLCI		1.3.6.1.4.1.321.100.1.9.2.1.2
The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsPeriod		1.3.6.1.4.1.321.100.1.9.2.1.3
The index into the DLCI stats 24-hour table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dlciStatsSummary(1), dlciStatsCurrent(2), dlciStatsperiod1(3), dlciStatsperiod2(4), dlciStatsperiod3(5), dlciStatsperiod4(6), dlciStatsperiod5(7), dlciStatsperiod6(8), dlciStatsperiod7(9), dlciStatsperiod8(10), dlciStatsperiod9(11), dlciStatsperiod10(12), dlciStatsperiod11(13), dlciStatsperiod12(14), dlciStatsperiod13(15), dlciStatsperiod14(16), dlciStatsperiod15(17), dlciStatsperiod16(18), dlciStatsperiod17(19), dlciStatsperiod18(20), dlciStatsperiod19(21), dlciStatsperiod20(22), dlciStatsperiod21(23), dlciStatsperiod22(24), dlciStatsperiod23(25), dlciStatsperiod24(26), dlciStatsperiod25(27), dlciStatsperiod26(28), dlciStatsperiod27(29), dlciStatsperiod28(30), dlciStatsperiod29(31), dlciStatsperiod30(32), dlciStatsperiod31(33), dlciStatsperiod32(34), dlciStatsperiod33(35), dlciStatsperiod34(36), dlciStatsperiod35(37), dlciStatsperiod36(38), dlciStatsperiod37(39), dlciStatsperiod38(40), dlciStatsperiod39(41), dlciStatsperiod40(42), dlciStatsperiod41(43), dlciStatsperiod42(44), dlciStatsperiod43(45), dlciStatsperiod44(46), dlciStatsperiod45(47), dlciStatsperiod46(48), dlciStatsperiod47(49), dlciStatsperiod48(50), dlciStatsperiod49(51), dlciStatsperiod50(52), dlciStatsperiod51(53), dlciStatsperiod52(54), dlciStatsperiod53(55), dlciStatsperiod54(56), dlciStatsperiod55(57), dlciStatsperiod56(58), dlciStatsperiod57(59), dlciStatsperiod58(60), dlciStatsperiod59(61), dlciStatsperiod60(62), dlciStatsperiod61(63), dlciStatsperiod62(64), dlciStatsperiod63(65), dlciStatsperiod64(66), dlciStatsperiod65(67), dlciStatsperiod66(68), dlciStatsperiod67(69), dlciStatsperiod68(70), dlciStatsperiod69(71), dlciStatsperiod70(72), dlciStatsperiod71(73), dlciStatsperiod72(74), dlciStatsperiod73(75), dlciStatsperiod74(76), dlciStatsperiod75(77), dlciStatsperiod76(78), dlciStatsperiod77(79), dlciStatsperiod78(80), dlciStatsperiod79(81), dlciStatsperiod80(82), dlciStatsperiod81(83), dlciStatsperiod82(84), dlciStatsperiod83(85), dlciStatsperiod84(86), dlciStatsperiod85(87), dlciStatsperiod86(88), dlciStatsperiod87(89), dlciStatsperiod88(90), dlciStatsperiod89(91), dlciStatsperiod90(92), dlciStatsperiod91(93), dlciStatsperiod92(94), dlciStatsperiod93(95), dlciStatsperiod94(96), dlciStatsperiod95(97), dlciStatsperiod96(98)

ipadDLCIstatsTxFrames		1.3.6.1.4.1.321.100.1.9.2.1.4
The number of transmitted frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxFrames		1.3.6.1.4.1.321.100.1.9.2.1.5
The number of received frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTxOctets		1.3.6.1.4.1.321.100.1.9.2.1.6
The number of transmitted octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxOctets		1.3.6.1.4.1.321.100.1.9.2.1.7
The number of received octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxFECN		1.3.6.1.4.1.321.100.1.9.2.1.8
The number of received frames with FECN set for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxBECN		1.3.6.1.4.1.321.100.1.9.2.1.9
The number of received frames with BECN set for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxDE		1.3.6.1.4.1.321.100.1.9.2.1.10
The number of received frames with DE bit set for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTxExcessCIR		1.3.6.1.4.1.321.100.1.9.2.1.11
The number of transmitted octets in excess of CIR for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTxExcessBe		1.3.6.1.4.1.321.100.1.9.2.1.12
The number of transmitted octets in excess of Be for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTxMgmtFrames		1.3.6.1.4.1.321.100.1.9.2.1.13
The number of transmitted management frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxMgmtFrames		1.3.6.1.4.1.321.100.1.9.2.1.14
The number of received management frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsTxMgmtOctets		1.3.6.1.4.1.321.100.1.9.2.1.15
The number of transmitted management octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRxMgmtOctets		1.3.6.1.4.1.321.100.1.9.2.1.16
The number of received management octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsPeak		1.3.6.1.4.1.321.100.1.9.2.1.17
Peak throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsAverage		1.3.6.1.4.1.321.100.1.9.2.1.18
Average throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsDelayPeak		1.3.6.1.4.1.321.100.1.9.2.1.19
Peak roundtrip delay for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsDelayAverage		1.3.6.1.4.1.321.100.1.9.2.1.20
Average roundtrip delay for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsRoundTripTimeouts		1.3.6.1.4.1.321.100.1.9.2.1.21
Number of timeouts on roundtrip delay for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadDLCIstatsUAS		1.3.6.1.4.1.321.100.1.9.2.1.22
Number of seconds the DLCI is unavailable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsTable		1.3.6.1.4.1.321.100.1.9.3
User-selected protocol statistics.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadUserStatsEntry

ipadUserStatsEntry		1.3.6.1.4.1.321.100.1.9.3.1
An entry in the user statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadUserStatsEntry

ipadUserStatsIndex		1.3.6.1.4.1.321.100.1.9.3.1.1
Index into the user statistics table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsPeriod		1.3.6.1.4.1.321.100.1.9.3.1.2
The index into the user stats 24-hour table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	userStatsSummary(1), userStatsCurrent(2), userStatsperiod1(3), userStatsperiod2(4), userStatsperiod3(5), userStatsperiod4(6), userStatsperiod5(7), userStatsperiod6(8), userStatsperiod7(9), userStatsperiod8(10), userStatsperiod9(11), userStatsperiod10(12), userStatsperiod11(13), userStatsperiod12(14), userStatsperiod13(15), userStatsperiod14(16), userStatsperiod15(17), userStatsperiod16(18), userStatsperiod17(19), userStatsperiod18(20), userStatsperiod19(21), userStatsperiod20(22), userStatsperiod21(23), userStatsperiod22(24), userStatsperiod23(25), userStatsperiod24(26), userStatsperiod25(27), userStatsperiod26(28), userStatsperiod27(29), userStatsperiod28(30), userStatsperiod29(31), userStatsperiod30(32), userStatsperiod31(33), userStatsperiod32(34), userStatsperiod33(35), userStatsperiod34(36), userStatsperiod35(37), userStatsperiod36(38), userStatsperiod37(39), userStatsperiod38(40), userStatsperiod39(41), userStatsperiod40(42), userStatsperiod41(43), userStatsperiod42(44), userStatsperiod43(45), userStatsperiod44(46), userStatsperiod45(47), userStatsperiod46(48), userStatsperiod47(49), userStatsperiod48(50), userStatsperiod49(51), userStatsperiod50(52), userStatsperiod51(53), userStatsperiod52(54), userStatsperiod53(55), userStatsperiod54(56), userStatsperiod55(57), userStatsperiod56(58), userStatsperiod57(59), userStatsperiod58(60), userStatsperiod59(61), userStatsperiod60(62), userStatsperiod61(63), userStatsperiod62(64), userStatsperiod63(65), userStatsperiod64(66), userStatsperiod65(67), userStatsperiod66(68), userStatsperiod67(69), userStatsperiod68(70), userStatsperiod69(71), userStatsperiod70(72), userStatsperiod71(73), userStatsperiod72(74), userStatsperiod73(75), userStatsperiod74(76), userStatsperiod75(77), userStatsperiod76(78), userStatsperiod77(79), userStatsperiod78(80), userStatsperiod79(81), userStatsperiod80(82), userStatsperiod81(83), userStatsperiod82(84), userStatsperiod83(85), userStatsperiod84(86), userStatsperiod85(87), userStatsperiod86(88), userStatsperiod87(89), userStatsperiod88(90), userStatsperiod89(91), userStatsperiod90(92), userStatsperiod91(93), userStatsperiod92(94), userStatsperiod93(95), userStatsperiod94(96), userStatsperiod95(97), userStatsperiod96(98)

ipadUserStatsTxFrames		1.3.6.1.4.1.321.100.1.9.3.1.3
Number of transmitted frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsRxFrames		1.3.6.1.4.1.321.100.1.9.3.1.4
Number of received frames for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsTxOctets		1.3.6.1.4.1.321.100.1.9.3.1.5
Number of transmitted octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsRxOctets		1.3.6.1.4.1.321.100.1.9.3.1.6
Number of received octets for the period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsTxRatePeak		1.3.6.1.4.1.321.100.1.9.3.1.7
Peak throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadUserStatsTxRateAverage		1.3.6.1.4.1.321.100.1.9.3.1.8
Average throughput rate for the period (in octets/second).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadIPTopNStatsTable		1.3.6.1.4.1.321.100.1.9.4
IP TopN statistics.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadIPTopNStatsEntry

ipadIPTopNStatsEntry		1.3.6.1.4.1.321.100.1.9.4.1
An entry in the user statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadIPTopNStatsEntry

ipadIPTopNStatsIndex		1.3.6.1.4.1.321.100.1.9.4.1.1
Index into the IP TopN statistics table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadIPTopNStatsAddress		1.3.6.1.4.1.321.100.1.9.4.1.2
IP address of this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..16)

ipadIPTopNStatsTimestamp		1.3.6.1.4.1.321.100.1.9.4.1.3
Time of last IP frame for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ipadIPTopNStatsRxFrames		1.3.6.1.4.1.321.100.1.9.4.1.4
Number of received IP frames for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadIPTopNStatsRxOctets		1.3.6.1.4.1.321.100.1.9.4.1.5
Number of received IP octets for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadIPTopNStatsTxFrames		1.3.6.1.4.1.321.100.1.9.4.1.6
Number of transmitted IP frames for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadIPTopNStatsTxOctets		1.3.6.1.4.1.321.100.1.9.4.1.7
Number of transmitted IP octets for this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadPktSwOperatingMode		1.3.6.1.4.1.321.100.1.10.1
Selects overall mode of operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), tdm(2), monitor(3), packet(4), remoteConfig(5)

ipadPktSwCfgTable		1.3.6.1.4.1.321.100.1.10.2
The ipad packet switch configuration table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadPktSwCfgTableEntry

ipadPktSwCfgTableEntry		1.3.6.1.4.1.321.100.1.10.2.1
An entry in the ipad packet switch configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadPktSwCfgTableEntry

ipadPktSwCfgService		1.3.6.1.4.1.321.100.1.10.2.1.1
The index into the packet switch configuration table; an entry in the ipad Service table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadPktSwCfgInterfaceType		1.3.6.1.4.1.321.100.1.10.2.1.2
Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	uni(1), ni(2), nni(3)

ipadPktSwCfgLnkMgmtType		1.3.6.1.4.1.321.100.1.10.2.1.3
If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), auto(2), ccitt(3), ansi(4), lmi(5), none(6)

ipadPktSwCfgMaxFrameSize		1.3.6.1.4.1.321.100.1.10.2.1.4
This is the maximum frame size configured in the frame relay network.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgnN1		1.3.6.1.4.1.321.100.1.10.2.1.5
Number of keep alive requests between full status request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgnN2		1.3.6.1.4.1.321.100.1.10.2.1.6
Number of errors from FRAD before alarm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgnN3		1.3.6.1.4.1.321.100.1.10.2.1.7
Number of events to sample nN2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgnT1		1.3.6.1.4.1.321.100.1.10.2.1.8
Delay before issuing a poll sequence.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgDefCIR		1.3.6.1.4.1.321.100.1.10.2.1.9
Default committed information rate in bits per second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgDefExBurst		1.3.6.1.4.1.321.100.1.10.2.1.10
Default excess burst rate in bits per second.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ipadPktSwCfgCIREE		1.3.6.1.4.1.321.100.1.10.2.1.11
Determines if the interface will enforce CIR and excess burst configured values.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPktSwCfgLinkInjection		1.3.6.1.4.1.321.100.1.10.2.1.12
Indicates how to process frames in excess of the CIR when congestion exists.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), standard(2), buffered(3), forced(4)

ipadPktSwCfgAutoDiagnostic		1.3.6.1.4.1.321.100.1.10.2.1.13
Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPktSwCfgAutoDiscovery		1.3.6.1.4.1.321.100.1.10.2.1.14
Determines if the unit will learn the DLCIs from the LMMI received on this service.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), no(2), yes(3)

ipadPktSwCfgMgmtDLCI		1.3.6.1.4.1.321.100.1.10.2.1.15
Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..4096

ipadTrapDestTable		1.3.6.1.4.1.321.100.1.11.1
The ipad trap destination table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadTrapDestTableEntry

ipadTrapDestTableEntry		1.3.6.1.4.1.321.100.1.11.1.1
An entry in the ipad trap destination table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadTrapDestTableEntry

ipadTrapDestIndex		1.3.6.1.4.1.321.100.1.11.1.1.1
Index into the ipad trap destination table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadTrapDestination		1.3.6.1.4.1.321.100.1.11.1.1.2
Trap destination.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ipadFrPortRxInvalidFramesExceeded		25000
This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded.
TRAP-TYPE

ipadFrPortRxThroughputExceeded		25001
This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded.
TRAP-TYPE

ipadFrPortTxThroughputExceeded		25002
This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded.
TRAP-TYPE

ipadDLCItxCIRexceeded		25003
This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR.
TRAP-TYPE

ipadDLCItxBEexceeded		25004
This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be.
TRAP-TYPE

ipadDLCIRxCongestionExceeded		25005
This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN.
TRAP-TYPE

ipadUserTxExceeded		25006
This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected protocol.
TRAP-TYPE

ipadDlciRxBECNinCIRAlarm		25007
This trap is sent out when a frame with BECN set has been received within CIR.
TRAP-TYPE

ipadDlciUASExceeded		25008
This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded.
TRAP-TYPE

ipadserialDteDTRAlarmExists		25009
This trap is sent out when a DTR Loss alarm is declared.
TRAP-TYPE

ipadt1e1ESAlarmDeclared		25010
This trap is sent out when an Errored Seconds alarm is declared.
TRAP-TYPE

ipadt1e1SESAlarmDeclared		25011
This trap is sent out when a Severely Errored Seconds alarm is declared.
TRAP-TYPE

ipadt1e1LOSSAlarmDeclared		25012
This trap is sent out when a Loss of Signal Seconds alarm is declared.
TRAP-TYPE

ipadt1e1UASAlarmDeclared		25013
This trap is sent out when an Unavailable Seconds alarm is declared.
TRAP-TYPE

ipadt1e1CSSAlarmDeclared		25014
This trap is sent out when a Controlled Slip Seconds alarm is declared.
TRAP-TYPE

ipadt1e1BPVSAlarmDeclared		25015
This trap is sent out when a Bipolar Violation Seconds alarm is declared.
TRAP-TYPE

ipadt1e1OOFSAlarmDeclared		25016
This trap is sent out when an Out of Frame Seconds alarm is declared.
TRAP-TYPE

ipadt1e1AISAlarmExists		25017
This trap is sent out when an Alarm Indication Signal alarm is declared.
TRAP-TYPE

ipadt1e1RASAlarmExists		25018
This trap is sent out when a Remote Alarm Signal alarm is declared.
TRAP-TYPE

ipadDLCIremoteSOSAlarm		25019
This trap is sent when the remote unit for a DLCI senses and reports an SOS condition.
TRAP-TYPE

ipadMiscPortSettings		1.3.6.1.4.1.321.100.1.12.1
The ipad miscellaneous port settings table.
Status: optional	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadMiscPortSettingsEntry

ipadMiscPortSettingsEntry		1.3.6.1.4.1.321.100.1.12.1.1
An entry in the ipad miscellaneous port settings table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadMiscPortSettingsEntry

ipadMiscPortSettingsIndex		1.3.6.1.4.1.321.100.1.12.1.1.1
The MIB-II ifIndex for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	supervisor(1), network1(2), network2(3), user1(4), user2(5), ethernet(6)

ipadMiscPortSettingsSerialType		1.3.6.1.4.1.321.100.1.12.1.1.2
The type of this serial port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), dce(2), dte(3)

ipadMiscClearStatusCounts		1.3.6.1.4.1.321.100.1.12.2
Writing a 2 to this field will clear all status counts.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), clear(2)

ipadSoftKeyTable		1.3.6.1.4.1.321.100.1.14.1
Table of software keys.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IpadSoftKeyTableEntry

ipadSoftKeyTableEntry		1.3.6.1.4.1.321.100.1.14.1.1
An entry in the software key table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpadSoftKeyTableEntry

ipadSoftKeyIndex		1.3.6.1.4.1.321.100.1.14.1.1.1
Index into the ipad software key table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ipadSoftKeyAcronym		1.3.6.1.4.1.321.100.1.14.1.1.2
Three-letter acronym for software key.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

ipadSoftKeyDescription		1.3.6.1.4.1.321.100.1.14.1.1.3
Description, if available, of this software key.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

ipadSoftKeyExpirationDate		1.3.6.1.4.1.321.100.1.14.1.1.4
Expiration date of this software key in the format YY/MM/DD.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

ipadSoftKeyEntry		1.3.6.1.4.1.321.100.1.14.2
Writing a software key will enable that feature (assuming a correct and valid key is entered).
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)