INTELCORPORATION-MULTI-FLEX-SERVER-FAN-MIB

File: INTELCORPORATION-MULTI-FLEX-SERVER-FAN-MIB.mib (19317 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INTELCORPORATION-MULTI-FLEX-SERVER-REG INTELCORPORATION-MULTI-FLEX-SERVER-TC INTELCORPORATION-MULTI-FLEX-SERVER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE OBJECT-IDENTITY
Integer32 Unsigned32 OBJECT-GROUP
DisplayString regModule groups
Index PowerLedStates FaultLedStates
PresenceLedStates Presence Power
INT32withException IdromBinary16 chassis

Defined Types

FanFruEntry  
SEQUENCE    
  fanFruIndex Index
  fanFruPresence Presence
  fanFruVendor DisplayString
  fanFruMfgDate DisplayString
  fanFruDeviceName DisplayString
  fanFruPart IdromBinary16
  fanFruSerialNo IdromBinary16
  fanFruMaximumPower Power
  fanFruNominalPower Power
  fanFruAssetTag IdromBinary16
  fanFruPowerLed PowerLedStates
  fanFruFaultLed FaultLedStates
  fanFruOpCodeVersion DisplayString
  fanFruBootBlockVersion DisplayString
  fanFruNumOfFans INT32withException
  fanFruInletTemperature INT32withException

FanEntry  
SEQUENCE    
  fanIndex Index
  fanRpmMinimum INTEGER
  fanRpmMaximum INTEGER
  fanRpmReading INTEGER

Defined Values

multiFlexServerFanMibModule 1.3.6.1.4.1.343.2.19.1.1.1.16
Fan Module of the Multi-Flex Server
MODULE-IDENTITY    

maxFanFrus 1.3.6.1.4.1.343.2.19.1.2.10.16
Maximum number of Fans possible in this chassis.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

numOfFanFrus 1.3.6.1.4.1.343.2.19.1.2.10.26
The number of Fans in the system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fanFruPresenceMask 1.3.6.1.4.1.343.2.19.1.2.10.36
ASCII representation of bit string reflecting the presence of the fans with the left most 'bit' being bit 1 and maxFans bits being represented. Thus, '11011' would express that all fans (of five fans) are present except fan 3
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fans 1.3.6.1.4.1.343.2.19.1.2.10.206
Container for Fan specific information as well as all components logically contained within.
Status: current Access: read-only
OBJECT-IDENTITY    

fanFruTable 1.3.6.1.4.1.343.2.19.1.2.10.206.1
Each row describes a Fan FRU in the chassis Current, this should include the 3 Fan FRUs (the two system Fan FRUs and the I/O Fan FRU) All system FRUs rows will be present
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanFruEntry

fanFruEntry 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1
..
Status: current Access: not-accessible
OBJECT-TYPE    
  FanFruEntry  

fanFruIndex 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.1
column used to identify a particular Fan FRU.
Status: current Access: read-only
OBJECT-TYPE    
  Index  

fanFruPresence 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.2
Flag whether this Fan FRU is present
Status: current Access: read-only
OBJECT-TYPE    
  Presence  

fanFruVendor 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.3
Device manufacturer
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fanFruMfgDate 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.4
Manufacture date/time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fanFruDeviceName 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.5
Device Name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fanFruPart 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.6
Device Part Number
Status: current Access: read-only
OBJECT-TYPE    
  IdromBinary16  

fanFruSerialNo 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.7
Device Serial Number
Status: current Access: read-only
OBJECT-TYPE    
  IdromBinary16  

fanFruMaximumPower 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.8
Static maximum power generation / consumption (in watts): <0 - Negative numbers indicate device consumes power (in watts) >0 - Positive numbers indicate device generates power (in watts) 0 - Device is passive (does not not consume or generate power) -1 - Maximum power generation/consumption not known or specified
Status: current Access: read-only
OBJECT-TYPE    
  Power  

fanFruNominalPower 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.9
Static Nominal power generation / consumption (in watts): <0 - Negative numbers indicate device consumes power (in watts) >0 - Positive numbers indicate device generates power (in watts) 0 - Device is passive (does not not consume or generate power) -1 - Nominal power generation/consumption not known or specified
Status: current Access: read-only
OBJECT-TYPE    
  Power  

fanFruAssetTag 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.10
Asset Tag # of device
Status: current Access: read-only
OBJECT-TYPE    
  IdromBinary16  

fanFruPowerLed 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.11
State of the Power LED on the Fan FRU
Status: current Access: read-only
OBJECT-TYPE    
  PowerLedStates  

fanFruFaultLed 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.12
State of the Fault LED on the Fan FRU
Status: current Access: read-only
OBJECT-TYPE    
  FaultLedStates  

fanFruOpCodeVersion 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.13
Op code version on the Fan FRU
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fanFruBootBlockVersion 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.14
Boot Block version on the Fan FRU
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

fanFruNumOfFans 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.15
Number of Fans contained within this FRU May be static data given the FRU
Status: current Access: read-only
OBJECT-TYPE    
  INT32withException  

fanFruInletTemperature 1.3.6.1.4.1.343.2.19.1.2.10.206.1.1.16
FRU Inlet Temperature in Degrees Celsius
Status: current Access: read-only
OBJECT-TYPE    
  INT32withException  

fanTable 1.3.6.1.4.1.343.2.19.1.2.10.206.2
Each row describes a Fan in a Fan FRU (indexed by the Fan FRU and by individual Fan) Current, this should include the 3 Fan FRUs (the two system Fan FRUs and the I/O Fan FRU) The number of Fans is dependent upon the FRU (see fanFruNumOfFans in the fanFruTable for a particular FRU)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanEntry

fanEntry 1.3.6.1.4.1.343.2.19.1.2.10.206.2.1
..
Status: current Access: not-accessible
OBJECT-TYPE    
  FanEntry  

fanIndex 1.3.6.1.4.1.343.2.19.1.2.10.206.2.1.1
which fan within a FRU we're talking about
Status: current Access: read-only
OBJECT-TYPE    
  Index  

fanRpmMinimum 1.3.6.1.4.1.343.2.19.1.2.10.206.2.1.2
Minimum settable RPM Potentially to be removed - See Murali/Niel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(-2), unknown(-1)  

fanRpmMaximum 1.3.6.1.4.1.343.2.19.1.2.10.206.2.1.3
Maximum settable RPM Potentially to be removed - See Murali/Niel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(-2), unknown(-1)  

fanRpmReading 1.3.6.1.4.1.343.2.19.1.2.10.206.2.1.4
Fan's current RPM reading: 0 - Fan not spinning ffffh - Fan speed is currently in transition (not valid)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(-2), unknown(-1), notspinning(0)  

fanGroup 1.3.6.1.4.1.343.2.19.1.2.2.2.16
Description.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor