INTEL-NIC-MIB
File:
INTEL-NIC-MIB.mib (48507 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
dmtf |
1.3.6.1.4.1.412 |
OBJECT IDENTIFIER |
|
|
|
intelnic |
1.3.6.1.4.1.343.2.7.1 |
OBJECT IDENTIFIER |
|
|
|
intelComponentIDTable |
1.3.6.1.4.1.343.2.7.1.3 |
This group defines the attributes common to all components.
This group is required. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SintelComponentID |
|
intelComponentIDEntry |
1.3.6.1.4.1.343.2.7.1.3.1 |
This group defines the attributes common to all components.
This group is required. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelComponentID |
|
|
installationAtt5 |
1.3.6.1.4.1.343.2.7.1.3.1.5 |
The time and date when this component was installed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Dmi-Date |
|
|
verifyAtt6 |
1.3.6.1.4.1.343.2.7.1.3.1.6 |
Status and functionality of the adapter(s) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
anErrorOccurredCheckStatusCode(0), thisComponentDoesNotExist(1), verificationIsNotSupported(2), reserved(3), thisComponentExistsButTheFunctionalityIsUntested(4), thisComponentExistsButTheFunctionalityIsUnknown(5), thisComponentExistsAndIsNotFunctioningCorrectly(6), thisComponentExistsAndIsFunctioningCorrectly(7) |
|
intelNetworkAdapterDriverEntry |
1.3.6.1.4.1.343.2.7.1.4.1 |
Network Adapter Driver |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelNetworkAdapterDriver |
|
|
intelNetworkAdapterDriverState |
1.3.6.1.4.1.343.2.7.1.4.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
driverInterfaceTypeAtt6 |
1.3.6.1.4.1.343.2.7.1.4.1.6 |
Driver Interface Type |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), ipx(2), odi(3), ndis(4), packetDriver(5), lantastic(6), unix(7), appletalk(8), ibmLanSupportProgram(9), llc(10), netbios(11), pathworksDLL(12) |
|
intelNetworkAdapter802PortEntry |
1.3.6.1.4.1.343.2.7.1.5.1 |
Adapter's Port Entry |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelNetworkAdapter802Port |
|
|
intelNetworkAdapter802PortState |
1.3.6.1.4.1.343.2.7.1.5.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
portIndexAtt1 |
1.3.6.1.4.1.343.2.7.1.5.1.1 |
The index value that uniquely identifies the
interface to an ethernet-like medium. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
connectorTypeAtt4 |
1.3.6.1.4.1.343.2.7.1.5.1.4 |
Adapter's Connection Type |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), aUI(2), uTPCategory3(3), uTPCategory4(4), uTPCategory5(5), bNC(6), sTPRJ45(7), sTPDB9(8), fiberMIC(9), appleAUI(10) |
|
intelNetworkAdapterInstrumentationEntry |
1.3.6.1.4.1.343.2.7.1.6.1 |
Adapter's Instrumentation |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelNetworkAdapterInstrumentation |
|
|
mIFIdAtt1 |
1.3.6.1.4.1.343.2.7.1.6.1.1 |
MIF ID |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
intelDriverExtensionsGroupEntry |
1.3.6.1.4.1.343.2.7.1.7.1 |
Driver Extensions |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelDriverExtensionsGroup |
|
|
intelDriverExtensionsGroupState |
1.3.6.1.4.1.343.2.7.1.7.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
intelEtherLikeEntry |
1.3.6.1.4.1.343.2.7.1.8.1 |
EtherLike Entries |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelEtherLike |
|
|
intelEtherLikeState |
1.3.6.1.4.1.343.2.7.1.8.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
indexAtt1 |
1.3.6.1.4.1.343.2.7.1.8.1.1 |
Index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
alignmentErrorsAtt2 |
1.3.6.1.4.1.343.2.7.1.8.1.2 |
Number of Frames with Alignment Errors (not an integral number of
octets in length and which do not pass the FCS check). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
fcsErrorsAtt3 |
1.3.6.1.4.1.343.2.7.1.8.1.3 |
Number of FCS Error Frames (an integral number of octets
in length but do not pass the FCS check). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
sqeTestErrorsAtt6 |
1.3.6.1.4.1.343.2.7.1.8.1.6 |
Number of times that the SQE TEST ERROR
message is generated by the PLS sublayer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
deferredTransmissionsAtt7 |
1.3.6.1.4.1.343.2.7.1.8.1.7 |
Number of deferred transmissions (frames delayed because the medium is busy). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
lateCollisionsAtt8 |
1.3.6.1.4.1.343.2.7.1.8.1.8 |
Number of late collisions (detected later than
512 bit-times into the transmission of a
packet). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
carrierSenseErrorsAtt11 |
1.3.6.1.4.1.343.2.7.1.8.1.11 |
Number of times that the carrier sense
was lost or never asserted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
intelVLANGroupEntry |
1.3.6.1.4.1.343.2.7.1.9.1 |
VLAN Group |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelVLANGroup |
|
|
intelVLANGroupState |
1.3.6.1.4.1.343.2.7.1.9.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
vLANIdAtt1 |
1.3.6.1.4.1.343.2.7.1.9.1.1 |
VLAN ID |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
typeOfVLANAtt3 |
1.3.6.1.4.1.343.2.7.1.9.1.3 |
VLAN Type |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
iSLStandard(1), iEEEStandard(2) |
|
intelNICHEALTHTable |
1.3.6.1.4.1.343.2.7.1.10 |
This group defines various attributes for the NIC Generated
Events. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SintelNICHEALTH |
|
intelNICHEALTHEntry |
1.3.6.1.4.1.343.2.7.1.10.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelNICHEALTH |
|
|
intelNICHEALTHState |
1.3.6.1.4.1.343.2.7.1.10.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
eventTypeAtt1 |
1.3.6.1.4.1.343.2.7.1.10.1.1 |
Event Type |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), lanControllerHardwareFailure(1), cableUnpluggedNoLANActivity(2), sWError(4), linkDown(8), adapterInitializationFailure(16), lineUp(32), lineDown(64) |
|
eventSolutionAtt3 |
1.3.6.1.4.1.343.2.7.1.10.1.3 |
Event Solution |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), noActionIsRequiredAtThisTime(1), reboot(2), reloadTheDriver(4), plugInTheCable(8), checkAdapterHardware(16) |
|
intelTeamingEventsGroupEntry |
1.3.6.1.4.1.343.2.7.1.11.1 |
This group defines various attributes for the Teaming Generated
Events. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelTeamingEventsGroup |
|
|
intelTeamingEventsGroupState |
1.3.6.1.4.1.343.2.7.1.11.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
teamIDAtt1 |
1.3.6.1.4.1.343.2.7.1.11.1.1 |
Team ID |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
eventTypeAtt2 |
1.3.6.1.4.1.343.2.7.1.11.1.2 |
Team Event which has occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), primaryAdapterSwitchingOverAndSecondaryTookOver(1), primaryAdapterBecameActive(2), secondaryAdapterDeactivatedFromTheTeam(4), lastAdapterLostLinkAndNetworkConnectionLost(8), preferredPrimaryDetected(16), teamOnlyHasOneActiveAdapter(32), secondaryAdapterRejoinedTheTeam(64), preferredPrimaryAdapterHasTakenOver(128), networkConnectionRestored(256) |
|
teamModeAtt3 |
1.3.6.1.4.1.343.2.7.1.11.1.3 |
The configuration mode of the team |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
faultToleranceOnlyAFT(1), loadBalancingALB(2), fastEtherChannnelTMFEC(3) |
|
teamSizeAtt4 |
1.3.6.1.4.1.343.2.7.1.11.1.4 |
Total number of adapters in the team |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
intelTeamingGroupEntry |
1.3.6.1.4.1.343.2.7.1.12.1 |
This group defines various attributes for an AFT/ALB/FEC
Team. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelTeamingGroup |
|
|
intelTeamingGroupState |
1.3.6.1.4.1.343.2.7.1.12.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
teamIDAtt1 |
1.3.6.1.4.1.343.2.7.1.12.1.1 |
Team ID. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
teamModeAtt2 |
1.3.6.1.4.1.343.2.7.1.12.1.2 |
Configuration Mode of the team |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
faultToleranceOnly(0), loadBalancing(1), fastEtherChannnel(2) |
|
teamSizeAtt3 |
1.3.6.1.4.1.343.2.7.1.12.1.3 |
Total number of adapters in the team |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
originalPrimaryAdapterAtt5 |
1.3.6.1.4.1.343.2.7.1.12.1.5 |
ID of the original Primary member of the Team (since last
reset). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
preferredPrimaryAdapterAtt6 |
1.3.6.1.4.1.343.2.7.1.12.1.6 |
ID of the currently designated Preferred Primary adapter in
the team. This may be empty if not chosen. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
intelTeamingMemberGroupEntry |
1.3.6.1.4.1.343.2.7.1.13.1 |
This group defines various attributes for each AFT/ALB/FEC
member. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelTeamingMemberGroup |
|
|
intelTeamingMemberGroupState |
1.3.6.1.4.1.343.2.7.1.13.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
adapterStatusAtt2 |
1.3.6.1.4.1.343.2.7.1.13.1.2 |
The current status of the adapter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(0), inactive(1) |
|
adapterFunctionAtt3 |
1.3.6.1.4.1.343.2.7.1.13.1.3 |
The current role played by the adapter in the team. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
standby(0), primary(1) |
|
adapterIDAtt4 |
1.3.6.1.4.1.343.2.7.1.13.1.4 |
ID of the adapter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
intelFCTCOGroupEntry |
1.3.6.1.4.1.343.2.7.1.14.1 |
Flow Control and TCO Group Attributes |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelFCTCOGroup |
|
|
intelFCTCOGroupState |
1.3.6.1.4.1.343.2.7.1.14.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
indexAtt1 |
1.3.6.1.4.1.343.2.7.1.14.1.1 |
Index |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiInteger |
|
|
flowControlRxUnsupportedAtt4 |
1.3.6.1.4.1.343.2.7.1.14.1.4 |
Number of MAC Control frames received by the device
that are not Flow Control Pause frames. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DmiCounter64 |
|
|
intelIBMFailoverControlEntry |
1.3.6.1.4.1.343.2.7.1.15.1 |
Provides a reference to the Failover Group |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelIBMFailoverControl |
|
|
intelIBMFailoverControlState |
1.3.6.1.4.1.343.2.7.1.15.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
intelIBMFailoverAdapterEntry |
1.3.6.1.4.1.343.2.7.1.16.1 |
Provides information on an IBM Failover Adapter |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SintelIBMFailoverAdapter |
|
|
intelFailoverAdapterState |
1.3.6.1.4.1.343.2.7.1.16.1.0 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
intelFailoverSystemStateAtt5 |
1.3.6.1.4.1.343.2.7.1.16.1.5 |
System State of the Failover Adapter |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
intelFailoverFailoverStateAtt6 |
1.3.6.1.4.1.343.2.7.1.16.1.6 |
Failover State of the Failover Adapter |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), primary(1), secondary(2) |
|
intelFailoverActiveStateAtt7 |
1.3.6.1.4.1.343.2.7.1.16.1.7 |
Active State of the Failover Adapter |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(0), active(1), failed(2) |
|
intelFailoverAllowRemoteManagementAtt8 |
1.3.6.1.4.1.343.2.7.1.16.1.8 |
Indicates if Failover Adapter supports remote management |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(0), yes(1) |
|
intelFailoverFailoverAdapterControlAtt9 |
1.3.6.1.4.1.343.2.7.1.16.1.9 |
Forces the Failover Adapter to change Failover State |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceSecondarytoPrimary(0), forcePrimarytoSecondary(1) |
|
intelFailoverEventTypeAtt10 |
1.3.6.1.4.1.343.2.7.1.16.1.10 |
Indicates the type of event which occurred to the Failover Adapter |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknownFailoverControlEvent(0), adapterFailover(1), refreshRequired(2) |
|
intelFailoverCapabilityAtt11 |
1.3.6.1.4.1.343.2.7.1.15.1.11 |
Indicates if the Failover Adapter supports hot swapping |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reserved(0), hotSwapSupported(1) |
|
intelFailoverHotSwapControlAtt12 |
1.3.6.1.4.1.343.2.7.1.16.1.12 |
Controls the Driver Power state for the Failover Adapter |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
beginHotSwap(0), endHotSwap(1), initializeAdapter(2) |
|
intelNICHEALTHEvSys |
1.3.6.1.4.1.343.2.7.1.10.6 |
Aspect causing the fault |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), adapter(1) |
|
intelNICHEALTHEvSub |
1.3.6.1.4.1.343.2.7.1.10.7 |
Sub aspect causing the fault. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), driver(1), oS(2) |
|
intelTeamingEventsGroupEvSys |
1.3.6.1.4.1.343.2.7.1.11.6 |
Major Group Event |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), adapter(1) |
|
intelTeamingEventsGroupEvSub |
1.3.6.1.4.1.343.2.7.1.11.7 |
Sub event |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), driver(1), oS(2) |
|
intelAdapterFailoverEvSys |
1.3.6.1.4.1.343.2.7.1.17.6 |
Major Event |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|