INFORMANT-WMI-EXCHANGE

File: INFORMANT-WMI-EXCHANGE.mib (192524 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Gauge32
Integer32	DateAndTime	TruthValue
DisplayString	informant

Defined Types

ExchangeClusterResourceEntry
SEQUENCE
	excrIndex	Integer32
	excrName	DisplayString
	excrOwner	DisplayString
	excrState	Gauge32
	excrType	DisplayString
	excrVirtualMachine	DisplayString

ExchangeConnectorStateEntry
SEQUENCE
	excsIndex	Integer32
	excsDN	DisplayString
	excsGroupDN	DisplayString
	excsGroupGUID	DisplayString
	excsGUID	DisplayString
	excsIsUp	TruthValue
	excsName	DisplayString

ExchangeLinkEntry
SEQUENCE
	exlIndex	Integer32
	exlActionFreeze	TruthValue
	exlActionKick	TruthValue
	exlActionThaw	TruthValue
	exlExtendedStateInfo	DisplayString
	exlGlobalStop	TruthValue
	exlIncreasingTime	Gauge32
	exlLinkDN	DisplayString
	exlLinkName	DisplayString
	exlNextScheduledConnection	DateAndTime
	exlNumberOfMessages	Gauge32
	exlOldestMessage	DateAndTime
	exlProtocolName	DisplayString
	exlSizeOfQueue	DisplayString
	exlStateActive	TruthValue
	exlStateFlags	Gauge32
	exlStateFrozen	TruthValue
	exlStateReady	TruthValue
	exlStateRemote	TruthValue
	exlStateRetry	TruthValue
	exlStateScheduled	TruthValue
	exlSupportedLinkActions	Gauge32
	exlTypeCurrentlyUnreachable	TruthValue
	exlTypeDeferredDelivery	TruthValue
	exlTypeInternal	TruthValue
	exlTypeLocalDelivery	TruthValue
	exlTypePendingCategorization	TruthValue
	exlTypePendingRouting	TruthValue
	exlTypePendingSubmission	TruthValue
	exlTypeRemoteDelivery	TruthValue
	exlVersion	Gauge32
	exlVirtualMachine	Gauge32
	exlVirtualServerName	DisplayString

ExchangeQueueEntry
SEQUENCE
	exqIndex	Integer32
	exqCanEnumAll	TruthValue
	exqCanEnumFailed	TruthValue
	exqCanEnumFirstNMessages	TruthValue
	exqCanEnumFrozen	TruthValue
	exqCanEnumInvertSense	TruthValue
	exqCanEnumLargerThan	TruthValue
	exqCanEnumNLargestMessages	TruthValue
	exqCanEnumNOldestMessages	TruthValue
	exqCanEnumOlderThan	TruthValue
	exqCanEnumRecipient	TruthValue
	exqCanEnumSender	TruthValue
	exqGlobalStop	TruthValue
	exqIncreasingTime	Gauge32
	exqLinkName	DisplayString
	exqMsgEnumFlagsSupported	Gauge32
	exqNumberOfMessages	Gauge32
	exqProtocolName	DisplayString
	exqQueueName	DisplayString
	exqSizeOfQueue	DisplayString
	exqVersion	Gauge32
	exqVirtualMachine	DisplayString
	exqVirtualServerName	DisplayString

ExchangeServerStateEntry
SEQUENCE
	exssIndex	Integer32
	exssClusterState	INTEGER
	exssClusterStateString	DisplayString
	exssCPUState	INTEGER
	exssCPUStateString	DisplayString
	exssDisksState	INTEGER
	exssDisksStateString	DisplayString
	exssDN	DisplayString
	exssGroupDN	DisplayString
	exssGroupGUID	DisplayString
	exssGUID	DisplayString
	exssMemoryState	INTEGER
	exssMemoryStateString	DisplayString
	exssName	DisplayString
	exssQueuesState	INTEGER
	exssQueuesStateString	DisplayString
	exssServerMaintenance	TruthValue
	exssServerState	INTEGER
	exssServerStateString	DisplayString
	exssServicesState	INTEGER
	exssServicesStateString	DisplayString
	exssUnreachable	TruthValue
	exssVersion	Gauge32

ExchangeDSAccessDCEntry
SEQUENCE
	exdsIndex	Integer32
	exdsConfigurationType	INTEGER
	exdsIsFast	TruthValue
	exdsIsInSync	TruthValue
	exdsIsUp	TruthValue
	exdsLDAPPort	Gauge32
	exdsName	DisplayString
	exdsType	INTEGER

ExchangeFolderTreeEntry
SEQUENCE
	exftIndex	Integer32
	exftAdministrativeGroup	DisplayString
	exftAdministrativeNote	DisplayString
	exftAssociatedPublicStores	DisplayString
	exftCreationTime	DateAndTime
	exftGUID	DisplayString
	exftHasLocalPublicStore	TruthValue
	exftLastModificationTime	DateAndTime
	exftMapiFolderTree	TruthValue
	exftName	DisplayString
	exftRootFolderURL	DisplayString

ExchangeLinkV2Entry
SEQUENCE
	exl2Index	Integer32
	exl2ActionFreeze	TruthValue
	exl2ActionKick	TruthValue
	exl2ActionThaw	TruthValue
	exl2ExtendedStateInfo	DisplayString
	exl2GlobalStop	TruthValue
	exl2LinkDN	DisplayString
	exl2LinkId	DisplayString
	exl2LinkName	DisplayString
	exl2MessageCount	Gauge32
	exl2NextScheduledConnection	DateAndTime
	exl2OldestMessage	DateAndTime
	exl2ProtocolName	DisplayString
	exl2Size	DisplayString
	exl2StateActive	TruthValue
	exl2StateFlags	Gauge32
	exl2StateFrozen	TruthValue
	exl2StateReady	TruthValue
	exl2StateRemote	TruthValue
	exl2StateRetry	TruthValue
	exl2StateScheduled	TruthValue
	exl2SupportedLinkActions	Gauge32
	exl2TypeCurrentlyUnreachable	TruthValue
	exl2TypeDeferredDelivery	TruthValue
	exl2TypeInternal	TruthValue
	exl2TypeLocalDelivery	TruthValue
	exl2TypePendingCategorization	TruthValue
	exl2TypePendingRouting	TruthValue
	exl2TypePendingSubmission	TruthValue
	exl2TypeRemoteDelivery	TruthValue
	exl2Version	Gauge32
	exl2VirtualMachine	DisplayString
	exl2VirtualServerName	DisplayString

ExchangeLogonEntry
SEQUENCE
	exloIndex	Integer32
	exloAdapterSpeed	Gauge32
	exloClientIP	DisplayString
	exloClientMode	INTEGER
	exloClientName	DisplayString
	exloClientVersion	DisplayString
	exloCodePageID	Gauge32
	exloFolderOperationRate	Gauge32
	exloHostAddress	DisplayString
	exloLastOperationTime	DateAndTime
	exloLatency	Gauge32
	exloLocaleID	Gauge32
	exloLoggedOnUserAccount	DisplayString
	exloLoggedOnUsersMailboxLegacyDN	DisplayString
	exloLogonTime	DateAndTime
	exloMacAddress	DisplayString
	exloMailboxDisplayName	DisplayString
	exloMailboxLegacyDN	DisplayString
	exloMessagingOperationRate	Gauge32
	exloOpenAttachmentCount	Gauge32
	exloOpenFolderCount	Gauge32
	exloOpenMessageCount	Gauge32
	exloOtherOperationRate	Gauge32
	exloProgressOperationRate	Gauge32
	exloRowID	Gauge32
	exloRPCSucceeded	Integer32
	exloServerName	DisplayString
	exloStorageGroupName	DisplayString
	exloStoreName	DisplayString
	exloStoreType	INTEGER
	exloStreamOperationRate	Gauge32
	exloTableOperationRate	Gauge32
	exloTotalOperationRate	Gauge32
	exloTransferOperationRate	Gauge32

ExchangeMailboxEntry
SEQUENCE
	exmIndex	Integer32
	exmAssocContentCount	Gauge32
	exmDateDiscoveredAbsentInDS	DateAndTime
	exmDeletedMessageSizeExtended	DisplayString
	exmLastLoggedOnUserAccount	DisplayString
	exmLastLogoffTime	DateAndTime
	exmLastLogonTime	DateAndTime
	exmLegacyDN	DisplayString
	exmMailboxDisplayName	DisplayString
	exmMailboxGUID	DisplayString
	exmServerName	DisplayString
	exmSize	DisplayString
	exmStorageGroupName	DisplayString
	exmStorageLimitInfo	INTEGER
	exmStoreName	DisplayString
	exmTotalItems	Gauge32

ExchangeMessageTrackingEntry
SEQUENCE
	exmtIndex	Integer32
	exmtAttemptedPartnerServer	DisplayString
	exmtClientIP	DisplayString
	exmtClientName	DisplayString
	exmtCost	Gauge32
	exmtDeliveryTime	Gauge32
	exmtEncrypted	TruthValue
	exmtEntryType	Gauge32
	exmtExpansionDL	DisplayString
	exmtKeyID	DisplayString
	exmtLinkedMessageID	DisplayString
	exmtMessageID	DisplayString
	exmtOriginationTime	DateAndTime
	exmtPartnerServer	DisplayString
	exmtPriority	Gauge32
	exmtRecipientAddress	DisplayString
	exmtRecipientCount	Gauge32
	exmtRecipientStatus	Gauge32
	exmtSenderAddress	DisplayString
	exmtServerIP	DisplayString
	exmtServerName	DisplayString
	exmtSize	Gauge32
	exmtSubject	DisplayString
	exmtSubjectID	DisplayString
	exmtTimeLogged	DateAndTime
	exmtVersion	DisplayString

ExchangePublicFolderEntry
SEQUENCE
	expfIndex	Integer32
	expfAddressBookName	DisplayString
	expfAdministrativeNote	DisplayString
	expfAdminSecurityDescriptor	DisplayString
	expfADProxyPath	DisplayString
	expfAssociatedMessageCount	Gauge32
	expfAttachmentCount	Gauge32
	expfCategorizationCount	Gauge32
	expfComment	DisplayString
	expfContactCount	Gauge32
	expfContainsRules	TruthValue
	expfCreationTime	DateAndTime
	expfDeletedItemLifetime	Gauge32
	expfFolderTree	DisplayString
	expfFriendlyUrl	DisplayString
	expfHasChildren	TruthValue
	expfHasLocalReplica	TruthValue
	expfIsMailEnabled	TruthValue
	expfIsNormalFolder	TruthValue
	expfIsPerUserReadDisabled	TruthValue
	expfIsSearchFolder	TruthValue
	expfIsSecureInSite	TruthValue
	expfLastAccessTime	DateAndTime
	expfLastModificationTime	DateAndTime
	expfMaximumItemSize	Gauge32
	expfMessageCount	Gauge32
	expfMessageWithAttachmentsCount	Gauge32
	expfName	DisplayString
	expfNormalMessageSize	Gauge32
	expfOwnerCount	Gauge32
	expfParentFriendlyUrl	DisplayString
	expfPath	DisplayString
	expfProhibitPostLimit	Gauge32
	expfPublishInAddressBook	TruthValue
	expfRecipientCountOnAssociateMsg	Gauge32
	expfRecipientCountOnNormalMsg	Gauge32
	expfReplicaAgeLimit	Gauge32
	expfReplicaList	DisplayString
	expfReplicationMessagePriority	INTEGER
	expfReplicationSchedule	DisplayString
	expfReplicationStyle	INTEGER
	expfRestrictionCount	Gauge32
	expfSecurityDescriptor	DisplayString
	expfStorageLimitStyle	INTEGER
	expfTargetAddress	DisplayString
	expfTotalMessageSize	Gauge32
	expfUrl	DisplayString
	expfUsePublicStoreAgeLimits	TruthValue
	expfUsePublicStoreDelItemLifetm	TruthValue
	expfWarningLimit	Gauge32

ExchangeQueueV2Entry
SEQUENCE
	exq2Index	Integer32
	exq2CanEnumAll	TruthValue
	exq2GlobalStop	TruthValue
	exq2LinkId	DisplayString
	exq2LinkName	DisplayString
	exq2MessageCount	Gauge32
	exq2MsgEnumFlagsSupported	Gauge32
	exq2ProtocolName	DisplayString
	exq2QueueId	DisplayString
	exq2QueueName	DisplayString
	exq2Size	DisplayString
	exq2Version	Gauge32
	exq2VirtualMachine	DisplayString
	exq2VirtualServerName	DisplayString

ExchangeQueueCacheReloadEventEntry
SEQUENCE
	exqcreIndex	Integer32
	exqcreReloadTime	DateAndTime

ExchangeQueuedMessageEntry
SEQUENCE
	exqmIndex	Integer32
	exqmActionDeleteNDR	TruthValue
	exqmActionDeleteNoNDR	TruthValue
	exqmActionFreeze	TruthValue
	exqmActionThaw	TruthValue
	exqmExpiry	DateAndTime
	exqmHighPriority	TruthValue
	exqmLinkId	DisplayString
	exqmLinkName	DisplayString
	exqmLowPriority	TruthValue
	exqmMessageId	DisplayString
	exqmNormalPriority	TruthValue
	exqmProtocolName	DisplayString
	exqmQueueId	DisplayString
	exqmQueueName	DisplayString
	exqmReceived	DateAndTime
	exqmRecipientCount	Gauge32
	exqmRecipients	DisplayString
	exqmSender	DisplayString
	exqmSize	Gauge32
	exqmStateFlags	Gauge32
	exqmStateFrozen	TruthValue
	exqmStateRetry	TruthValue
	exqmSubject	DisplayString
	exqmSubmission	DateAndTime
	exqmVersion	Gauge32
	exqmVirtualMachine	DisplayString
	exqmVirtualServerName	DisplayString

ExchangeQueueVirtualServerEntry
SEQUENCE
	exvsIndex	Integer32
	exvsGlobalActionsSupported	TruthValue
	exvsGlobalStop	TruthValue
	exvsProtocolName	DisplayString
	exvsVirtualMachine	DisplayString
	exvsVirtualServerName	DisplayString

ExchangeServerEntry
SEQUENCE
	exsIndex	Integer32
	exsAdministrativeGroup	DisplayString
	exsAdministrativeNote	DisplayString
	exsCreationTime	DateAndTime
	exsDN	DisplayString
	exsExchangeVersion	DisplayString
	exsFQDN	DisplayString
	exsGUID	DisplayString
	exsIsFrontEndServer	TruthValue
	exsLastModificationTime	DateAndTime
	exsMessageTrackingEnabled	TruthValue
	exsMessageTrackingLogFileLifetm	Gauge32
	exsMessageTrackingLogFilePath	DisplayString
	exsMonitoringEnabled	TruthValue
	exsMTADataPath	DisplayString
	exsName	DisplayString
	exsRoutingGroup	DisplayString
	exsSubjectLoggingEnabled	TruthValue
	exsType	INTEGER

ExchangeQueuedSMTPMessage
SEQUENCE
	exqsmIndex	Integer32
	exqsmActionDeleteNDR	TruthValue
	exqsmActionDeleteNoNDR	TruthValue
	exqsmActionFreeze	TruthValue
	exqsmActionThaw	TruthValue
	exqsmExpiry	DateAndTime
	exqsmHighPriority	TruthValue
	exqsmLinkId	DisplayString
	exqsmLinkName	DisplayString
	exqsmLowPriority	TruthValue
	exqsmMessageId	DisplayString
	exqsmNormalPriority	TruthValue
	exqsmProtocolName	DisplayString
	exqsmQueueId	DisplayString
	exqsmQueueName	DisplayString
	exqsmReceived	DateAndTime
	exqsmRecipientCount	Gauge32
	exqsmRecipients	DisplayString
	exqsmSender	DisplayString
	exqsmSize	Gauge32
	exqsmStateFlags	Gauge32
	exqsmStateFrozen	TruthValue
	exqsmStateRetry	TruthValue
	exqsmSubject	DisplayString
	exqsmSubmission	DateAndTime
	exqsmVersion	Gauge32
	exqsmVirtualMachine	DisplayString
	exqsmVirtualServerName	DisplayString

ExchangeQueuedX400Message
SEQUENCE
	exqxmIndex	Integer32
	exqxmActionDeleteNDR	TruthValue
	exqxmActionDeleteNoNDR	TruthValue
	exqxmActionFreeze	TruthValue
	exqxmActionThaw	TruthValue
	exqxmExpiry	DateAndTime
	exqxmHighPriority	TruthValue
	exqxmLinkId	DisplayString
	exqxmLinkName	DisplayString
	exqxmLowPriority	TruthValue
	exqxmMessageId	DisplayString
	exqxmNormalPriority	TruthValue
	exqxmProtocolName	DisplayString
	exqxmQueueId	DisplayString
	exqxmQueueName	DisplayString
	exqxmReceived	DateAndTime
	exqxmRecipientCount	Gauge32
	exqxmRecipients	DisplayString
	exqxmSender	DisplayString
	exqxmSize	Gauge32
	exqxmStateFlags	Gauge32
	exqxmStateFrozen	TruthValue
	exqxmStateRetry	TruthValue
	exqxmSubject	DisplayString
	exqxmSubmission	DateAndTime
	exqxmVersion	Gauge32
	exqxmVirtualMachine	DisplayString
	exqxmVirtualServerName	DisplayString

ExchangeQueueSMTPVirtualServer
SEQUENCE
	exqsvsIndex	Integer32
	exqsvsGlobalActionsSupported	TruthValue
	exqsvsGlobalStop	TruthValue
	exqsvsProtocolName	DisplayString
	exqsvsVirtualMachine	DisplayString
	exqsvsVirtualServerName	DisplayString

ExchangeQueueX400VirtualServer
SEQUENCE
	exqxvsIndex	Integer32
	exqxvsGlobalActionsSupported	TruthValue
	exqxvsGlobalStop	TruthValue
	exqxvsProtocolName	DisplayString
	exqxvsVirtualMachine	DisplayString
	exqxvsVirtualServerName	DisplayString

ExchangeScheduleInterval
SEQUENCE
	exsiIndex	Integer32
	exsiStartTime	DateAndTime
	exsiStopTime	DateAndTime

ExchangeSMTPLink
SEQUENCE
	exslIndex	Integer32
	exslActionFreeze	TruthValue
	exslActionKick	TruthValue
	exslActionThaw	TruthValue
	exslExtendedStateInfo	DisplayString
	exslGlobalStop	TruthValue
	exslLinkDN	DisplayString
	exslLinkId	DisplayString
	exslLinkName	DisplayString
	exslMessageCount	Gauge32
	exslNextScheduledConnection	DateAndTime
	exslOldestMessage	DateAndTime
	exslProtocolName	DisplayString
	exslKSize	Gauge32
	exslMSize	Gauge32
	exslStateActive	TruthValue
	exslStateFlags	Gauge32
	exslStateFrozen	TruthValue
	exslStateReady	TruthValue
	exslStateRemote	TruthValue
	exslStateRetry	TruthValue
	exslStateScheduled	TruthValue
	exslSupportedLinkActions	Gauge32
	exslTypeCurrentlyUnreachable	TruthValue
	exslTypeDeferredDelivery	TruthValue
	exslTypeInternal	TruthValue
	exslTypeLocalDelivery	TruthValue
	exslTypePendingCategorization	TruthValue
	exslTypePendingRouting	TruthValue
	exslTypePendingSubmission	TruthValue
	exslTypeRemoteDelivery	TruthValue
	exslVersion	Gauge32
	exslVirtualMachine	DisplayString
	exslVirtualServerName	DisplayString

ExchangeSMTPQueue
SEQUENCE
	exsqIndex	Integer32
	exsqCanEnumAll	TruthValue
	exsqGlobalStop	TruthValue
	exsqLinkId	DisplayString
	exsqLinkName	DisplayString
	exsqMessageCount	Gauge32
	exsqMsgEnumFlagsSupported	Gauge32
	exsqProtocolName	DisplayString
	exsqQueueId	DisplayString
	exsqQueueName	DisplayString
	exsqKSize	Gauge32
	exsqMSize	Gauge32
	exsqVersion	Gauge32
	exsqVirtualMachine	DisplayString
	exsqVirtualServerName	DisplayString

ExchangeX400Link
SEQUENCE
	exxlIndex	Integer32
	exxlActionFreeze	TruthValue
	exxlActionKick	TruthValue
	exxlActionThaw	TruthValue
	exxlExtendedStateInfo	DisplayString
	exxlGlobalStop	TruthValue
	exxlLinkDN	DisplayString
	exxlLinkId	DisplayString
	exxlLinkName	DisplayString
	exxlMessageCount	Gauge32
	exxlNextScheduledConnection	DateAndTime
	exxlOldestMessage	DateAndTime
	exxlProtocolName	DisplayString
	exxlKSize	Gauge32
	exxlMSize	Gauge32
	exxlStateActive	TruthValue
	exxlStateFlags	Gauge32
	exxlStateFrozen	TruthValue
	exxlStateReady	TruthValue
	exxlStateRemote	TruthValue
	exxlStateRetry	TruthValue
	exxlStateScheduled	TruthValue
	exxlSupportedLinkActions	Gauge32
	exxlTypeCurrentlyUnreachable	TruthValue
	exxlTypeDeferredDelivery	TruthValue
	exxlTypeInternal	TruthValue
	exxlTypeLocalDelivery	TruthValue
	exxlTypePendingCategorization	TruthValue
	exxlTypePendingRouting	TruthValue
	exxlTypePendingSubmission	TruthValue
	exxlTypeRemoteDelivery	TruthValue
	exxlVersion	Gauge32
	exxlVirtualMachine	DisplayString
	exxlVirtualServerName	DisplayString

ExchangeX400Queue
SEQUENCE
	exxqIndex	Integer32
	exxqCanEnumAll	TruthValue
	exxqGlobalStop	TruthValue
	exxqLinkId	DisplayString
	exxqLinkName	DisplayString
	exxqMessageCount	Gauge32
	exxqMsgEnumFlagsSupported	Gauge32
	exxqProtocolName	DisplayString
	exxqQueueId	DisplayString
	exxqQueueName	DisplayString
	exxqKSize	Gauge32
	exxqMSize	Gauge32
	exxqVersion	Gauge32
	exxqVirtualMachine	DisplayString
	exxqVirtualServerName	DisplayString

Defined Values

wmiExchange		1.3.6.1.4.1.9600.1.23
The MIB module for informant exchange WMI entities.
MODULE-IDENTITY

exchangeClusterResourceTable		1.3.6.1.4.1.9600.1.23.1
The ExchangeClusterResource WMI class has properties that return information about a Microsoft Exchange cluster resource.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeClusterResourceEntry

exchangeClusterResourceEntry		1.3.6.1.4.1.9600.1.23.1.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeClusterResourceEntry

excrIndex		1.3.6.1.4.1.9600.1.23.1.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

excrName		1.3.6.1.4.1.9600.1.23.1.1.2
The Name property returns the name of the Microsoft Exchange cluster resource. The Name property is read-only, and is a key property of this class.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excrOwner		1.3.6.1.4.1.9600.1.23.1.1.3
The Owner property for a cluster resource specifies the cluster node of which the resource is a part. The Owner property is read-only.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excrState		1.3.6.1.4.1.9600.1.23.1.1.4
The State property specifies the current state of the cluster resource.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

excrType		1.3.6.1.4.1.9600.1.23.1.1.5
The Type property specifies the resource type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excrVirtualMachine		1.3.6.1.4.1.9600.1.23.1.1.6
The Type property specifies the resource type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeConnectorStateTable		1.3.6.1.4.1.9600.1.23.2
The ExchangeConnectorState WMI class has properties that return information about a Microsoft Exchange connector.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeConnectorStateEntry

exchangeConnectorStateEntry		1.3.6.1.4.1.9600.1.23.2.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeConnectorStateEntry

excsIndex		1.3.6.1.4.1.9600.1.23.2.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

excsDN		1.3.6.1.4.1.9600.1.23.2.1.2
The DN property specifies the Microsoft Active Directory distinguished name (DN) of the Exchange Connector object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excsGroupDN		1.3.6.1.4.1.9600.1.23.2.1.3
The GroupDN property specifies the distinguished name (DN) in Active Directory of the routing group.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excsGroupGUID		1.3.6.1.4.1.9600.1.23.2.1.4
The GroupGUID property specifies the globally unique identifier (GUID) of the routing group.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excsGUID		1.3.6.1.4.1.9600.1.23.2.1.5
The GUID property specifies the GUID of the Exchange Connector.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

excsIsUp		1.3.6.1.4.1.9600.1.23.2.1.6
The IsUp property, when True, specifies that the Exchange Connector is operating normally.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

excsName		1.3.6.1.4.1.9600.1.23.2.1.7
The Name property specifies the name of the Exchange Connector.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeLinkTable		1.3.6.1.4.1.9600.1.23.3
The ExchangeLink WMI class has properties that return information about message-handling links between mail servers. A link can contain zero or more ExchangeQueue objects, depending on the current message traffic along the link. In the Exchange System Manager, these links are called queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeLinkEntry

exchangeLinkEntry		1.3.6.1.4.1.9600.1.23.3.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeLinkEntry

exlIndex		1.3.6.1.4.1.9600.1.23.3.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exlActionFreeze		1.3.6.1.4.1.9600.1.23.3.1.2
The ActionFreeze property, when True, specifies that the link supports freezing messages in its queues. The ActionFreeze property corresponds to the sixth bit (0x00000020) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlActionKick		1.3.6.1.4.1.9600.1.23.3.1.3
The ActionKick property, when True, specifies that the link can trigger its queues to retry transmitting waiting messages immediately, instead of waiting for the default protocol timeout before retrying the transmission. The ActionKick property corresponds to the first bit (0x00000001) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlActionThaw		1.3.6.1.4.1.9600.1.23.3.1.4
The ActionThaw property, when True, specifies that the link supports thawing messages in its queues. Thawing a queue is also known as 'unfreezing' that queue. The ActionThaw property corresponds to the seventh bit (0x00000040) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlExtendedStateInfo		1.3.6.1.4.1.9600.1.23.3.1.5
The ExtendedStateInfo property specifies the text description of the current link status.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exlGlobalStop		1.3.6.1.4.1.9600.1.23.3.1.6
The GlobalStop property specifies whether the link is currently stopped.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlIncreasingTime		1.3.6.1.4.1.9600.1.23.3.1.7
The IncreasingTime property specifies the amount of time, in milliseconds, that the number of messages waiting to be transferred by the link has been increasing.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlLinkDN		1.3.6.1.4.1.9600.1.23.3.1.8
The LinkDN property specifies the Active Directory globally unique identifier (GUID) of the connector object that generated the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exlLinkName		1.3.6.1.4.1.9600.1.23.3.1.9
The LinkName property specifies the name of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exlNextScheduledConnection		1.3.6.1.4.1.9600.1.23.3.1.10
The NextScheduledConnection property specifies the date and time when a connection will be attempted to transfer waiting messages.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exlNumberOfMessages		1.3.6.1.4.1.9600.1.23.3.1.11
The NumberOfMessages property specifies the number of messages that are waiting for transmission across the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlOldestMessage		1.3.6.1.4.1.9600.1.23.3.1.12
The OldestMessage property specifies the date and time that the oldest message that is still waiting to be transmitted was received into the link.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exlProtocolName		1.3.6.1.4.1.9600.1.23.3.1.13
The ProtocolName property specifies the transmission protocol for the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exlSizeOfQueue		1.3.6.1.4.1.9600.1.23.3.1.14
The SizeOfQueue property specifies the total size of the messages in the link, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exlStateActive		1.3.6.1.4.1.9600.1.23.3.1.15
The StateActive property, when True, specifies that the link is active. The StateActive property corresponds to first bit (0x00000001) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlStateFlags		1.3.6.1.4.1.9600.1.23.3.1.16
The StateFlags property specifies the state of the link. The individual bits of this property are available as the link State. and Type. properties of this class.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlStateFrozen		1.3.6.1.4.1.9600.1.23.3.1.17
The StateFrozen property indicates whether the link is currently frozen. The StateFrozen property corresponds to the sixth bit (0x00000020) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlStateReady		1.3.6.1.4.1.9600.1.23.3.1.18
The StateReady property, when True, specifies that the link is ready to accept new messages. The StateReady property corresponds to the second bit (0x00000002) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlStateRemote		1.3.6.1.4.1.9600.1.23.3.1.19
The StateRemote property, when True, specifies that the destination for messages in this link is on a remote server, instead of the messages being delivered to a local store. The StateRemote property corresponds to the fifth bit (0x00000010) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlStateRetry		1.3.6.1.4.1.9600.1.23.3.1.20
The StateRetry property, when True, specifies that the link is retrying a transmission that was unsuccessful. The StateRetry property corresponds to the third bit (0x00000004) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlStateScheduled		1.3.6.1.4.1.9600.1.23.3.1.21
The StateScheduled property, when True, specifies that the link is scheduled for periodic activation, as compared with asynchronous, on-demand activation. The StateScheduled property corresponds to the fourth bit (0x00000008) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlSupportedLinkActions		1.3.6.1.4.1.9600.1.23.3.1.22
The SupportedLinkActions property specifies the actions supported by the link. The individual bits of this property are available as the Action. properties in this class.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlTypeCurrentlyUnreachable		1.3.6.1.4.1.9600.1.23.3.1.23
The TypeCurrentlyUnreachable property, when True, specifies that the link holds messages for destinations that currently cannot be reached. The TypeCurrentlyUnreachable property corresponds to the thirteenth bit (0x00001000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypeDeferredDelivery		1.3.6.1.4.1.9600.1.23.3.1.24
The TypeDeferredDelivery property, when True, specifies that the link holds mail that is awaiting a trigger to start transmission. The TypeDeferredDelivery property corresponds to the fourteenth bit (0x00002000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypeInternal		1.3.6.1.4.1.9600.1.23.3.1.25
The TypeInternal property indicates that the link is used for internal message processing. The TypeInternal property corresponds to the fifteenth bit (0x00004000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypeLocalDelivery		1.3.6.1.4.1.9600.1.23.3.1.26
The TypeLocalDelivery property, when True, specifies that the link handles local mail delivery. The TypeLocalDelivery property corresponds to the tenth bit (0x00000200) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypePendingCategorization		1.3.6.1.4.1.9600.1.23.3.1.27
The TypePendingCategorization property, when True, specifies that the link is resolving addresses against entries in Active Directory. The TypePendingCategorization property corresponds to the twelfth bit (0x00000800) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypePendingRouting		1.3.6.1.4.1.9600.1.23.3.1.28
The TypePendingRouting property, when True, specifies that the link is determining the routing of the next message that is waiting to be transmitted. The TypePendingRouting property corresponds to the eleventh bit (0x00000400) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypePendingSubmission		1.3.6.1.4.1.9600.1.23.3.1.29
The TypePendingSubmission property, when True, specifies that the link handles messages that have not yet been submitted to the routing engine. The TypePendingSubmission property corresponds to the sixteenth bit (0x00008000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlTypeRemoteDelivery		1.3.6.1.4.1.9600.1.23.3.1.30
The TypeRemoteDelivery property, when True, specifies that the link is currently handling a remote message delivery. The TypeRemoteDelivery property corresponds to the ninth bit (0x00000100) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exlVersion		1.3.6.1.4.1.9600.1.23.3.1.31
The Version property specifies the version number of the underlying link control software.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlVirtualMachine		1.3.6.1.4.1.9600.1.23.3.1.32
The VirtualMachine property specifies the name of the virtual machine that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exlVirtualServerName		1.3.6.1.4.1.9600.1.23.3.1.33
The value of the VirtualServerName property is the integer number of the virtual machine that is the source of the link. This number is the Microsoft Active Directorycommon name (CN) for the virtual server object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueueTable		1.3.6.1.4.1.9600.1.23.4
The ExchangeQueue WMI class has properties that return information about the dynamic queues created to transfer individual messages between mail servers. An ExchangeQueue is part of an ExchangeLink. ExchangeQueue objects are not the same as the queues listed in the Exchange System Manager.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueEntry

exchangeQueueEntry		1.3.6.1.4.1.9600.1.23.4.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueEntry

exqIndex		1.3.6.1.4.1.9600.1.23.4.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqCanEnumAll		1.3.6.1.4.1.9600.1.23.4.1.2
The CanEnumAll property, when True, specifies that the queue can enumerate all of the messages that it has waiting for transmission. The CanEnumAll property corresponds to the thirty-first bit (0x40000000) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumFailed		1.3.6.1.4.1.9600.1.23.4.1.3
The CanEnumFailed property, when True, specifies that the queue can enumerate the messages that it has waiting for transmission that it was unable to transfer. The CanEnumFailed property corresponds to the ninth bit (0x00000100) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumFirstNMessages		1.3.6.1.4.1.9600.1.23.4.1.4
The CanEnumFirstNMessages property, when True, specifies that the queue can enumerate the first N messages that it has waiting for transmission. The CanEnumFirstNMessages property corresponds to the first bit (0x00000001) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumFrozen		1.3.6.1.4.1.9600.1.23.4.1.5
The CanEnumFrozen property, when True, specifies that the queue can enumerate messages that it has waiting for transmission that have been frozen. The CanEnumFrozen property corresponds to the sixth bit (0x00000020) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumInvertSense		1.3.6.1.4.1.9600.1.23.4.1.6
The CanEnumInvertSense property, when True, specifies that the queue can enumerate messages that it has waiting for transmission that do not match the criteria requested. For example, requesting the oldest messages while inverting the request sense would return the newest messages. The CanEnumInvertSense property corresponds to the thirty-second bit (0x80000000) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumLargerThan		1.3.6.1.4.1.9600.1.23.4.1.7
The CanEnumLargerThan property, when True, specifies that the queue can enumerate the messages that it has waiting for transmission that are larger than a specified value. The CanEnumLargerThan property corresponds to the fourth bit (0x00000008) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumNLargestMessages		1.3.6.1.4.1.9600.1.23.4.1.8
The CanEnumNLargestMessages property, when True, specifies that the queue can enumerate the specified number of the largest messages that it has waiting for transmission. The CanEnumNLargestMessages property corresponds to the seventh bit (0x00000040) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumNOldestMessages		1.3.6.1.4.1.9600.1.23.4.1.9
The CanEnumNOldestMessages property, when True, specifies that the queue can enumerate the specified number of the oldest messages that it has waiting for transmission. The CanEnumNOldestMessages property corresponds to the eighth bit (0x00000080) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumOlderThan		1.3.6.1.4.1.9600.1.23.4.1.10
The CanEnumOlderThan property, when True, specifies that the queue can enumerate the messages that it has waiting for transmission that arrived before a specified date and time. The CanEnumOlderThan property corresponds to the fifth bit (0x00000010) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumRecipient		1.3.6.1.4.1.9600.1.23.4.1.11
The CanEnumRecipient property, when True, specifies that the queue can enumerate the recipients of messages that it has waiting for transmission. The CanEnumRecipient property corresponds to the fourth bit (0x00000004) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqCanEnumSender		1.3.6.1.4.1.9600.1.23.4.1.12
The CanEnumSender property, when True, specifies that the queue can enumerate the senders of messages that it has waiting for transmission. The CanEnumSender property corresponds to the second bit (0x00000002) of the MsgEnumFlagsSupported property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqGlobalStop		1.3.6.1.4.1.9600.1.23.4.1.13
The GlobalStop property specifies whether the queue is currently stopped.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqIncreasingTime		1.3.6.1.4.1.9600.1.23.4.1.14
The IncreasingTime property specifies the amount of time, in milliseconds, that the number of messages waiting to be transferred by the queue has been increasing.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqLinkName		1.3.6.1.4.1.9600.1.23.4.1.15
The LinkName property specifies the name of the link in which this queue is contained.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqMsgEnumFlagsSupported		1.3.6.1.4.1.9600.1.23.4.1.16
The MsgEnumFlagsSupported property specifies a bit-mapped set of flags that indicate what types of objects can be enumerated. The individual bits of this property are available as the queue CanEnum. properties in this class.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqNumberOfMessages		1.3.6.1.4.1.9600.1.23.4.1.17
The NumberOfMessages property specifies the number of messages that are waiting for transmission by the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqProtocolName		1.3.6.1.4.1.9600.1.23.4.1.18
The ProtocolName property specifies the transmission protocol for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqQueueName		1.3.6.1.4.1.9600.1.23.4.1.19
The QueueName property specifies the name of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqSizeOfQueue		1.3.6.1.4.1.9600.1.23.4.1.20
The SizeOfQueue property specifies the total size of all messages in the queue, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqVersion		1.3.6.1.4.1.9600.1.23.4.1.21
The Version property specifies the version number of the Microsoft Exchange software.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqVirtualMachine		1.3.6.1.4.1.9600.1.23.4.1.22
The VirtualMachine property specifies the name of the virtual machine that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqVirtualServerName		1.3.6.1.4.1.9600.1.23.4.1.23
The value of the VirtualServerName property is the integer number of the virtual machine that is the source of the queue. This number is the Microsoft Active Directory common name (CN) for the virtual server object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeServerStateTable		1.3.6.1.4.1.9600.1.23.5
The ExchangeServerState WMI class has properties that return information about the computer running Microsoft Exchange 2000 Server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeServerStateEntry

exchangeServerStateEntry		1.3.6.1.4.1.9600.1.23.5.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeServerStateEntry

exssIndex		1.3.6.1.4.1.9600.1.23.5.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exssClusterState		1.3.6.1.4.1.9600.1.23.5.1.2
When the ExchangeServerState instance represents a clustered Exchange server, the ClusterState property specifies the state of the clustered resources on that server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssClusterStateString		1.3.6.1.4.1.9600.1.23.5.1.3
When the ExchangeServerState instance represents a clustered Exchange server, the ClusterStateString property specifies the state of the cluster resources on that server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssCPUState		1.3.6.1.4.1.9600.1.23.5.1.4
The CPUState property specifies the current state of the CPU on the Exchange server. This is the same state information shown on the Monitoring and Status Properties page of the Exchange System Manager.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssCPUStateString		1.3.6.1.4.1.9600.1.23.5.1.5
The CPUStateString property specifies the current state of the CPU on the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssDisksState		1.3.6.1.4.1.9600.1.23.5.1.6
The DisksState property specifies the current state of the disk storage on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssDisksStateString		1.3.6.1.4.1.9600.1.23.5.1.7
The DisksStateString property specifies the current state of the disk storage on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssDN		1.3.6.1.4.1.9600.1.23.5.1.8
The DN property specifies the Microsoft Active Directory distinguished name (DN) of the Exchange server object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssGroupDN		1.3.6.1.4.1.9600.1.23.5.1.9
The GroupDN property specifies the DN of the Exchange 2000 Server routing group in Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssGroupGUID		1.3.6.1.4.1.9600.1.23.5.1.10
The GroupGUID property specifies the globally unique identifier (GUID) of the Exchange 2000 Server routing group in Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssGUID		1.3.6.1.4.1.9600.1.23.5.1.11
The GUID property specifies the GUID of the Exchange 2000 Server server object in Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssMemoryState		1.3.6.1.4.1.9600.1.23.5.1.12
The MemoryState property specifies the current state of the memory on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssMemoryStateString		1.3.6.1.4.1.9600.1.23.5.1.13
The MemoryStateString property specifies the current state of the memory on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssName		1.3.6.1.4.1.9600.1.23.5.1.14
The Name property specifies the name of the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssQueuesState		1.3.6.1.4.1.9600.1.23.5.1.15
The QueuesState property specifies the current state of the queues on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssQueuesStateString		1.3.6.1.4.1.9600.1.23.5.1.16
The QueuesStateString property specifies the current state of the queues on the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssServerMaintenance		1.3.6.1.4.1.9600.1.23.5.1.17
The ServerMaintenance property, when True, specifies that the notifications set up in the Exchange 2000 Server System Manager Monitoring and Status page have been disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exssServerState		1.3.6.1.4.1.9600.1.23.5.1.18
The ServerState property specifies the current state of the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssServerStateString		1.3.6.1.4.1.9600.1.23.5.1.19
The ServerStateString property specifies the current state of the computer running Exchange 2000 Server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssServicesState		1.3.6.1.4.1.9600.1.23.5.1.20
The ServicesState property specifies the current state of the monitoring services running on the Exchange 2000 Server computer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), ok(1), warning(2), error(3)

exssServicesStateString		1.3.6.1.4.1.9600.1.23.5.1.21
The ServicesStateString property specifies the current state of the monitoring services running on the Exchange 2000 Server computer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exssUnreachable		1.3.6.1.4.1.9600.1.23.5.1.22
The Unreachable property, when True, specifies that the Exchange 2000 Server computer is currently unreachable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exssVersion		1.3.6.1.4.1.9600.1.23.5.1.23
The Version property indicates the version of the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exchangeDSAccessDCTable		1.3.6.1.4.1.9600.1.23.6
The properties of the Exchange_DSAccessDC class provide information about Microsoft Active Directory and Microsoft Exchange Server 5.5 domain controllers that are accessible to the Exchange 2000 Server DSAccess service.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeDSAccessDCEntry

exchangeDSAccessDCEntry		1.3.6.1.4.1.9600.1.23.6.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeDSAccessDCEntry

exdsIndex		1.3.6.1.4.1.9600.1.23.6.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exdsConfigurationType		1.3.6.1.4.1.9600.1.23.6.1.2
The ConfigurationType property indicates whether the instance describes a domain controller that was detected automatically, or one that was specified manually.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	manual(0), automatic(1)

exdsIsFast		1.3.6.1.4.1.9600.1.23.6.1.3
The IsFast property indicates, when True, that the domain controller response time has been less than two seconds.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exdsIsInSync		1.3.6.1.4.1.9600.1.23.6.1.4
The IsInSync property indicates whether the domain controller is synchronized with the Global Catalog server and with the Configuration domain controller.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exdsIsUp		1.3.6.1.4.1.9600.1.23.6.1.5
The IsUp property indicates whether the domain controller was available the last time Exchange attempted to access it.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exdsLDAPPort		1.3.6.1.4.1.9600.1.23.6.1.6
The LDAPPort property specifies the TCP/IP port on which the domain controller listens for LDAP requests.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exdsName		1.3.6.1.4.1.9600.1.23.6.1.7
The Name property specifies the computer name of the domain controller.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exdsType		1.3.6.1.4.1.9600.1.23.6.1.8
The Type property specifies the role that the domain controller plays in the Exchange system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	configurationDomainController(0), localDomainController(1), globalCatalog(2)

exchangeFolderTreeTable		1.3.6.1.4.1.9600.1.23.7
Instances of the Exchange_FolderTree WMI class provide information about public and private folder trees on Microsoft Exchange servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeFolderTreeEntry

exchangeFolderTreeEntry		1.3.6.1.4.1.9600.1.23.7.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeFolderTreeEntry

exftIndex		1.3.6.1.4.1.9600.1.23.7.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exftAdministrativeGroup		1.3.6.1.4.1.9600.1.23.7.1.2
The AdministrativeGroup property indicates the name of the administrative group that the top-level hierarchy (TLH) resides under in Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exftAdministrativeNote		1.3.6.1.4.1.9600.1.23.7.1.3
The AdministrativeNote property indicates the administrative note attached to the Microsoft Active Directory object representing the tree.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exftAssociatedPublicStores		1.3.6.1.4.1.9600.1.23.7.1.4
The AssociatedPublicStores property indicates the list of MDBs associated with the top-level hierarchy (TLH).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exftCreationTime		1.3.6.1.4.1.9600.1.23.7.1.5
The CreationTime property indicates when the tree was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exftGUID		1.3.6.1.4.1.9600.1.23.7.1.6
The GUID property indicates the globally unique identifier (GUID) attribute of the top-level hierarchy (TLH) object in Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exftHasLocalPublicStore		1.3.6.1.4.1.9600.1.23.7.1.7
The HasLocalPublicStore property indicates whether the computer contains the Exchange store associated with the folder tree.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exftLastModificationTime		1.3.6.1.4.1.9600.1.23.7.1.8
The LastModificationTime property indicates when the tree was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exftMapiFolderTree		1.3.6.1.4.1.9600.1.23.7.1.9
The MapiFolderTree property indicates whether this is the MAPI top-level hierarchy (TLH).
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exftName		1.3.6.1.4.1.9600.1.23.7.1.10
The Name property indicates the name of the top-level hierarchy (TLH).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exftRootFolderURL		1.3.6.1.4.1.9600.1.23.7.1.11
The RootFolderURL property indicates the URL to the root of the tree referenced through the Exchange administration IIS virtual directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeLinkV2Table		1.3.6.1.4.1.9600.1.23.8
The Exchange_Link WMI class has properties that return information about message-handling links between mail servers. A link can contain zero or more Exchange_Queue objects, depending on the current message traffic along the link. In the Microsoft Exchange System Manager, these links are called queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeLinkV2Entry

exchangeLinkV2Entry		1.3.6.1.4.1.9600.1.23.8.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeLinkV2Entry

exl2Index		1.3.6.1.4.1.9600.1.23.8.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exl2ActionFreeze		1.3.6.1.4.1.9600.1.23.8.1.2
The ActionFreeze property, when TRUE, specifies that the link supports freezing messages in its queues. The ActionFreeze property corresponds to the sixth bit (0x00000020) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2ActionKick		1.3.6.1.4.1.9600.1.23.8.1.3
The ActionKick property, when TRUE, specifies that the link can trigger its queues to retry transmitting waiting messages immediately, instead of waiting for the default protocol timeout before retrying the transmission. The ActionKick property corresponds to the first bit (0x00000001) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2ActionThaw		1.3.6.1.4.1.9600.1.23.8.1.4
The ActionThaw property, when TRUE, specifies that the link supports thawing messages in its queues. Thawing a queue is also known as 'unfreezing' that queue. The ActionThaw property corresponds to the seventh bit (0x00000040) of the SupportedLinkActions property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2ExtendedStateInfo		1.3.6.1.4.1.9600.1.23.8.1.5
The ExtendedStateInfo property provides the text description of the current link status, including extended error reporting and troubleshooting information.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2GlobalStop		1.3.6.1.4.1.9600.1.23.8.1.6
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2LinkDN		1.3.6.1.4.1.9600.1.23.8.1.7
The LinkDN property specifies the name of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2LinkId		1.3.6.1.4.1.9600.1.23.8.1.8
The LinkId property indicates the identifier for the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2LinkName		1.3.6.1.4.1.9600.1.23.8.1.9
The LinkName property indicates the name of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2MessageCount		1.3.6.1.4.1.9600.1.23.8.1.10
The MessageCount property specifies the number of messages that are waiting for transmission across the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exl2NextScheduledConnection		1.3.6.1.4.1.9600.1.23.8.1.11
The NextScheduledConnection property indicates the next time a connection will be attempted.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exl2OldestMessage		1.3.6.1.4.1.9600.1.23.8.1.12
The OldestMessage property specifies the date and time that the oldest message that is still waiting to be transmitted was received into the link.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exl2ProtocolName		1.3.6.1.4.1.9600.1.23.8.1.13
The ProtocolName property indicates the transmission protocol used by the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2Size		1.3.6.1.4.1.9600.1.23.8.1.14
The Size property specifies the total size of the messages in the link, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2StateActive		1.3.6.1.4.1.9600.1.23.8.1.15
The StateActive property, when TRUE, specifies that the link is active. The StateActive property corresponds to first bit (0x00000001) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2StateFlags		1.3.6.1.4.1.9600.1.23.8.1.16
The StateFlags property specifies the state of the link. The individual bits of this property are available as the link State. and Type. properties of this class.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exl2StateFrozen		1.3.6.1.4.1.9600.1.23.8.1.17
The StateFrozen property indicates whether the link is currently frozen. The StateFrozen property corresponds to the sixth bit (0x00000020) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2StateReady		1.3.6.1.4.1.9600.1.23.8.1.18
The StateReady property, when TRUE, specifies that the link is ready to accept new messages. The StateReady property corresponds to the second bit (0x00000002) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2StateRemote		1.3.6.1.4.1.9600.1.23.8.1.19
The StateRemote property, when TRUE, specifies that the destination for messages in this link is on a remote server, instead of the messages being delivered to a local store. The StateRemote property corresponds to the fifth bit (0x00000010) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2StateRetry		1.3.6.1.4.1.9600.1.23.8.1.20
The StateRetry property, when TRUE, specifies that the link is retrying a transmission that was unsuccessful. The StateRetry property corresponds to the third bit (0x00000004) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2StateScheduled		1.3.6.1.4.1.9600.1.23.8.1.21
The StateScheduled property, when TRUE, specifies that the link is scheduled for periodic activation, as compared with asynchronous, on-demand activation. The StateScheduled property corresponds to the fourth bit (0x00000008) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2SupportedLinkActions		1.3.6.1.4.1.9600.1.23.8.1.22
The SupportedLinkActions property specifies the actions supported by the link. The individual bits of this property are available as the Action. properties in this class.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exl2TypeCurrentlyUnreachable		1.3.6.1.4.1.9600.1.23.8.1.23
The TypeCurrentlyUnreachable property, when TRUE, specifies that the link holds messages for destinations that currently cannot be reached. The TypeCurrentlyUnreachable property corresponds to the thirteenth bit (0x00001000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypeDeferredDelivery		1.3.6.1.4.1.9600.1.23.8.1.24
The TypeDeferredDelivery property, when TRUE, specifies that the link holds mail that is awaiting a trigger to start transmission. The TypeDeferredDelivery property corresponds to the fourteenth bit (0x00002000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypeInternal		1.3.6.1.4.1.9600.1.23.8.1.25
The TypeInternal property indicates that the link is used for internal message processing. The TypeInternal property corresponds to the fifteenth bit (0x00004000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypeLocalDelivery		1.3.6.1.4.1.9600.1.23.8.1.26
The TypeLocalDelivery property, when TRUE, specifies that the link handles local mail delivery. The TypeLocalDelivery property corresponds to the tenth bit (0x00000200) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypePendingCategorization		1.3.6.1.4.1.9600.1.23.8.1.27
The TypePendingCategorization property, when TRUE, specifies that the link is resolving addresses against entries in Active Directory. The TypePendingCategorization property corresponds to the twelfth bit (0x00000800) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypePendingRouting		1.3.6.1.4.1.9600.1.23.8.1.28
The TypePendingRouting property, when TRUE, specifies that the link is determining the routing of the next message that is waiting to be transmitted. The TypePendingRouting property corresponds to the eleventh bit (0x00000400) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypePendingSubmission		1.3.6.1.4.1.9600.1.23.8.1.29
The TypePendingSubmission property, when TRUE, specifies that the link handles messages that have not yet been submitted to the routing engine. The TypePendingSubmission property corresponds to the sixteenth bit (0x00008000) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2TypeRemoteDelivery		1.3.6.1.4.1.9600.1.23.8.1.30
The TypeRemoteDelivery property, when TRUE, specifies that the link is currently handling a remote message delivery. The TypeRemoteDelivery property corresponds to the ninth bit (0x00000100) of the StateFlags property.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exl2Version		1.3.6.1.4.1.9600.1.23.8.1.31
The Version property specifies the version number of the underlying link control software.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exl2VirtualMachine		1.3.6.1.4.1.9600.1.23.8.1.32
The VirtualMachine property indicates the name of the virtual machine that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exl2VirtualServerName		1.3.6.1.4.1.9600.1.23.8.1.33
The value of the VirtualServerName property is the integer number of the virtual machine that is the source of the link. This number is the Microsoft Active Directory common name (CN) for the virtual server object.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeLogonTable		1.3.6.1.4.1.9600.1.23.9
Instances of Exchange_Logon represent the users currently logged on to Microsoft Exchange.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeLogonEntry

exchangeLogonEntry		1.3.6.1.4.1.9600.1.23.9.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeLogonEntry

exloIndex		1.3.6.1.4.1.9600.1.23.9.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exloAdapterSpeed		1.3.6.1.4.1.9600.1.23.9.1.2
The AdapterSpeed property indicates the speed of the client network interface card, in kilobits/second
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloClientIP		1.3.6.1.4.1.9600.1.23.9.1.3
The ClientIP property indicates the IP address of the client computer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloClientMode		1.3.6.1.4.1.9600.1.23.9.1.4
The ClientMode property indicates whether the client is using local data caching.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	classicOnline(1), cached(2)

exloClientName		1.3.6.1.4.1.9600.1.23.9.1.5
The ClientName property indicates the client computer name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloClientVersion		1.3.6.1.4.1.9600.1.23.9.1.6
The ClientVersion property indicates the version of the client used to log on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloCodePageID		1.3.6.1.4.1.9600.1.23.9.1.7
The CodePageID property indicates the code page of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloFolderOperationRate		1.3.6.1.4.1.9600.1.23.9.1.8
The FolderOperationRate property indicates the folder operation rate (per second) performed by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloHostAddress		1.3.6.1.4.1.9600.1.23.9.1.9
The HostAddress property indicates the client-specific identification information.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloLastOperationTime		1.3.6.1.4.1.9600.1.23.9.1.10
The LastOperationTime property indicates the time when the last operation was performed.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exloLatency		1.3.6.1.4.1.9600.1.23.9.1.11
The Latency property indicates the server response latency time reported by the client, in milliseconds.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloLocaleID		1.3.6.1.4.1.9600.1.23.9.1.12
The LocaleID property indicates the Windows locale of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloLoggedOnUserAccount		1.3.6.1.4.1.9600.1.23.9.1.13
The LoggedOnUserAccount property indicates the name of the user account that logged on in the format DOMAIN\SAMAccountName.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloLoggedOnUsersMailboxLegacyDN		1.3.6.1.4.1.9600.1.23.9.1.14
The LoggedOnUsersMailboxLegacyDN property indicates the legacyDN of the user who is currently logged on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloLogonTime		1.3.6.1.4.1.9600.1.23.9.1.15
The LogonTime property indicates the time that the user logged on.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exloMacAddress		1.3.6.1.4.1.9600.1.23.9.1.16
The MacAddress property indicates the network interface card Media Access Connector address of the client computer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloMailboxDisplayName		1.3.6.1.4.1.9600.1.23.9.1.17
The MailboxDisplayName property indicates the name of the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloMailboxLegacyDN		1.3.6.1.4.1.9600.1.23.9.1.18
The MailboxLegacyDN property indicates the legacyDN of the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloMessagingOperationRate		1.3.6.1.4.1.9600.1.23.9.1.19
The MessagingOperationRate property indicates the rate of send/receive operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloOpenAttachmentCount		1.3.6.1.4.1.9600.1.23.9.1.20
The OpenAttachmentCount property indicates the number of attachments currently opened by the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloOpenFolderCount		1.3.6.1.4.1.9600.1.23.9.1.21
The OpenFolderCount property indicates the number of folders currently opened by the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloOpenMessageCount		1.3.6.1.4.1.9600.1.23.9.1.22
The OpenMessageCount property indicates the number of messages currently opened by the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloOtherOperationRate		1.3.6.1.4.1.9600.1.23.9.1.23
The OtherOperationRate property indicates the rate of operations performed on the store, in response to client requests that are not within the other categories of operation-request properties.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloProgressOperationRate		1.3.6.1.4.1.9600.1.23.9.1.24
The ProgressOperationRate property indicates the rate of progress operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloRowID		1.3.6.1.4.1.9600.1.23.9.1.25
The RowID property indicates that a random identifier is generated per query to ensure uniqueness.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloRPCSucceeded		1.3.6.1.4.1.9600.1.23.9.1.26
The RPCSucceeded property indicates the number of successful RPC requests made by the client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

exloServerName		1.3.6.1.4.1.9600.1.23.9.1.27
The ServerName property indicates the name of the server where the mailbox resides.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloStorageGroupName		1.3.6.1.4.1.9600.1.23.9.1.28
The StorageGroupName property indicates the name of the storage group that contains the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloStoreName		1.3.6.1.4.1.9600.1.23.9.1.29
The StoreName property indicates the name of the MDB that contains the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exloStoreType		1.3.6.1.4.1.9600.1.23.9.1.30
The StoreType property indicates whether the store contains mailboxes or public folders.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	mailboxStore(1), publicStore(2)

exloStreamOperationRate		1.3.6.1.4.1.9600.1.23.9.1.31
The StreamOperationRate property indicates the rate of stream operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloTableOperationRate		1.3.6.1.4.1.9600.1.23.9.1.32
The TableOperationRate property indicates the rate of table operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloTotalOperationRate		1.3.6.1.4.1.9600.1.23.9.1.33
The TotalOperationRate property indicates the rate of all operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exloTransferOperationRate		1.3.6.1.4.1.9600.1.23.9.1.34
The TransferOperationRate property indicates the rate of transfer operations performed per second by the store on behalf of the client.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exchangeMailboxTable		1.3.6.1.4.1.9600.1.23.10
The Exchange_Mailbox WMI class has properties that return information about Microsoft Exchange mailboxes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeMailboxEntry

exchangeMailboxEntry		1.3.6.1.4.1.9600.1.23.10.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeMailboxEntry

exmIndex		1.3.6.1.4.1.9600.1.23.10.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exmAssocContentCount		1.3.6.1.4.1.9600.1.23.10.1.2
The AssocContentCount property indicates the total number of messages associated with the mailbox folders.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmDateDiscoveredAbsentInDS		1.3.6.1.4.1.9600.1.23.10.1.3
The DateDiscoveredAbsentInDS property indicates when the store detected that the mailbox no longer had a corresponding user entry in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exmDeletedMessageSizeExtended		1.3.6.1.4.1.9600.1.23.10.1.4
The DeletedMessageSizeExtended property indicates the cumulative size of all deleted messages that are still being retained according to retention policy settings.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmLastLoggedOnUserAccount		1.3.6.1.4.1.9600.1.23.10.1.5
The LastLoggedOnUserAccount property indicates the account name last used to log on to the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmLastLogoffTime		1.3.6.1.4.1.9600.1.23.10.1.6
The LastLogoffTime property indicates the time that the last user logged off.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exmLastLogonTime		1.3.6.1.4.1.9600.1.23.10.1.7
The LastLogonTime property indicates the time that the last user logged on.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exmLegacyDN		1.3.6.1.4.1.9600.1.23.10.1.8
The LegacyDN property indicates the legacyDN of the mailbox and matches the legacyDN attribute of the user object in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmMailboxDisplayName		1.3.6.1.4.1.9600.1.23.10.1.9
The MailboxDisplayName property indicates the display name of the mailbox and matches the displayName attribute in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmMailboxGUID		1.3.6.1.4.1.9600.1.23.10.1.10
The MailboxGUID property indicates the globally unique identifier (GUID) that links the mailbox to a user in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmServerName		1.3.6.1.4.1.9600.1.23.10.1.11
The ServerName property indicates the name of the server where the mailbox resides.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmSize		1.3.6.1.4.1.9600.1.23.10.1.12
The Size property indicates the cumulative size of all of the messages in the mailbox, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmStorageGroupName		1.3.6.1.4.1.9600.1.23.10.1.13
The StorageGroupName property indicates the name of the storage group that contains the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmStorageLimitInfo		1.3.6.1.4.1.9600.1.23.10.1.14
The StorageLimitInfo property contains the storage limit settings on the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	belowLimit(1), issueWarning(2), prohibitSend(4), noChecking(8), mailboxDisabled(16)

exmStoreName		1.3.6.1.4.1.9600.1.23.10.1.15
The StoreName property indicates the name of the MDB that contains the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmTotalItems		1.3.6.1.4.1.9600.1.23.10.1.16
The TotalItems property indicates the total number of messages in the mailbox.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exchangeMessageTrackingTable		1.3.6.1.4.1.9600.1.23.11
Instances of the Exchange_MessageTrackingEntry class provide information about events that have occurred to the message during the time it was under the control of the computer running Microsoft Exchange 2000 Server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeMessageTrackingEntry

exchangeMessageTrackingEntry		1.3.6.1.4.1.9600.1.23.11.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeMessageTrackingEntry

exmtIndex		1.3.6.1.4.1.9600.1.23.11.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exmtAttemptedPartnerServer		1.3.6.1.4.1.9600.1.23.11.1.2
The AttemptedPartnerServer property indicates the server to which Exchange tried to send a message, but was unable to complete the transfer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtClientIP		1.3.6.1.4.1.9600.1.23.11.1.3
The ClientIP property indicates the TCP/IP address of the messaging client that originally submitted the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtClientName		1.3.6.1.4.1.9600.1.23.11.1.4
The ClientName property indicates the name of the messaging client application that submitted the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtCost		1.3.6.1.4.1.9600.1.23.11.1.5
The Cost property indicates the relative effort required to transfer the message. There are no specific units used in this property. Higher values indicate that slower network connections must be used, or that a greater number of transfers is required to transfer the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtDeliveryTime		1.3.6.1.4.1.9600.1.23.11.1.6
The DeliveryTime property indicates the amount of time, in seconds, required to deliver the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtEncrypted		1.3.6.1.4.1.9600.1.23.11.1.7
The Encrypted property indicates, when True, that the message is encrypted.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exmtEntryType		1.3.6.1.4.1.9600.1.23.11.1.8
The EntryType property indicates what occurred to cause the message tracking log entry to be created.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtExpansionDL		1.3.6.1.4.1.9600.1.23.11.1.9
The ExpansionDL property indicates the name of the Exchange distribution list that was expanded. After the distribution list is expanded, the message recipient list includes the names of the individual members of that distribution list.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtKeyID		1.3.6.1.4.1.9600.1.23.11.1.10
The KeyID property uniquely identifies the message log entry.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtLinkedMessageID		1.3.6.1.4.1.9600.1.23.11.1.11
The LinkedMessageID property is the string identifier assigned to the message when it is received by the PartnerServer property. This property sometimes has the same value as the MessageID Property.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtMessageID		1.3.6.1.4.1.9600.1.23.11.1.12
The MessageID property indicates the identifier string for the message. The identifier may be assigned by the messaging client application or by the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtOriginationTime		1.3.6.1.4.1.9600.1.23.11.1.13
The OriginationTime property indicates the date and time, in UTC, when the message was received by Exchange.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exmtPartnerServer		1.3.6.1.4.1.9600.1.23.11.1.14
The PartnerServer property indicates the server to which Exchange transferred the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtPriority		1.3.6.1.4.1.9600.1.23.11.1.15
The Priority property specifies the importance of the message, as displayed by the messaging client application.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtRecipientAddress		1.3.6.1.4.1.9600.1.23.11.1.16
The RecipientAddress property returns an array. Each array element contains the e-mail address of one of the message recipients.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtRecipientCount		1.3.6.1.4.1.9600.1.23.11.1.17
The RecipientCount property indicates how many recipients are in the recipients list for the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtRecipientStatus		1.3.6.1.4.1.9600.1.23.11.1.18
Each element of the RecipientStatus array indicates the message type sent to the recipient specified in the corresponding element of the RecipientAddress array.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtSenderAddress		1.3.6.1.4.1.9600.1.23.11.1.19
The SenderAddress property specifies the e-mail address of the message sender.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtServerIP		1.3.6.1.4.1.9600.1.23.11.1.20
The ServerIP property indicates the TCP/IP protocol address of the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtServerName		1.3.6.1.4.1.9600.1.23.11.1.21
The ServerName property indicates the name of the virtual server instance that created the message tracking log entry.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtSize		1.3.6.1.4.1.9600.1.23.11.1.22
The Size property indicates the message size, including attachments, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exmtSubject		1.3.6.1.4.1.9600.1.23.11.1.23
The Subject property indicates the subject of the message, as found in the Subject: message header.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtSubjectID		1.3.6.1.4.1.9600.1.23.11.1.24
The SubjectID property specifies an identifier created by the messaging client application.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exmtTimeLogged		1.3.6.1.4.1.9600.1.23.11.1.25
The TimeLogged property indicates the date and time, in UTC, when the message tracking log entry was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exmtVersion		1.3.6.1.4.1.9600.1.23.11.1.26
The Version property indicates the version of the service that created the message tracking log entry.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangePublicFolderTable		1.3.6.1.4.1.9600.1.23.12
The Exchange_PublicFolder WMI class provides properties and methods for working with Microsoft Exchange public folders.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangePublicFolderEntry

exchangePublicFolderEntry		1.3.6.1.4.1.9600.1.23.12.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangePublicFolderEntry

expfIndex		1.3.6.1.4.1.9600.1.23.12.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

expfAddressBookName		1.3.6.1.4.1.9600.1.23.12.1.2
The AddressBookName property specifies the address book name of the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfAdministrativeNote		1.3.6.1.4.1.9600.1.23.12.1.3
The AdministrativeNote property specifies the administrative note associated with the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfAdminSecurityDescriptor		1.3.6.1.4.1.9600.1.23.12.1.4
The AdminSecurityDescriptor property specifies the security descriptor that is used when a user logs on to the store with administrative privileges.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfADProxyPath		1.3.6.1.4.1.9600.1.23.12.1.5
The ADProxyPath property indicates the globally unique identifier (GUID) of the Active Directory mail proxy for the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfAssociatedMessageCount		1.3.6.1.4.1.9600.1.23.12.1.6
The AssociatedMessageCount property is a MAPI property that contains the total number of associated messages in the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfAttachmentCount		1.3.6.1.4.1.9600.1.23.12.1.7
The AttachmentCount property indicates the total number of attachments on all normal messages in a folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfCategorizationCount		1.3.6.1.4.1.9600.1.23.12.1.8
The CategorizationCount property indicates the total number of categorizations on the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfComment		1.3.6.1.4.1.9600.1.23.12.1.9
The Comment property specifies the folder comment.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfContactCount		1.3.6.1.4.1.9600.1.23.12.1.10
The ContactCount property indicates the number of contacts in a public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfContainsRules		1.3.6.1.4.1.9600.1.23.12.1.11
The ContainsRules property indicates whether the public folder contains rules.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfCreationTime		1.3.6.1.4.1.9600.1.23.12.1.12
The CreationTime property indicates when the folder was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

expfDeletedItemLifetime		1.3.6.1.4.1.9600.1.23.12.1.13
The DeletedItemLifetime property specifies how long, in days, that deleted messages can be recovered.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfFolderTree		1.3.6.1.4.1.9600.1.23.12.1.14
The FolderTree property indicates the WMI path to the top-level hierarchy object to which the folder belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfFriendlyUrl		1.3.6.1.4.1.9600.1.23.12.1.15
The FriendlyUrl property indicates the path-based URL to the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfHasChildren		1.3.6.1.4.1.9600.1.23.12.1.16
The HasChildren property indicates whether the folder has subfolders.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfHasLocalReplica		1.3.6.1.4.1.9600.1.23.12.1.17
The HasLocalReplica property indicates whether the folder has a local replica.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfIsMailEnabled		1.3.6.1.4.1.9600.1.23.12.1.18
The IsMailEnabled property specifies whether the folder is mail-enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfIsNormalFolder		1.3.6.1.4.1.9600.1.23.12.1.19
The IsNormalFolder property indicates whether the public folder is a normal folder.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfIsPerUserReadDisabled		1.3.6.1.4.1.9600.1.23.12.1.20
The IsPerUserReadDisabled property specifies whether the folder tracks per-user read information for messages.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfIsSearchFolder		1.3.6.1.4.1.9600.1.23.12.1.21
The IsSearchFolder property indicates whether the public folder is a search folder.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfIsSecureInSite		1.3.6.1.4.1.9600.1.23.12.1.22
The IsSecureInSite property specifies whether administrative access is limited to the home site of the folder.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfLastAccessTime		1.3.6.1.4.1.9600.1.23.12.1.23
The LastAccessTime property indicates the last date that the replica of a public folder was accessed.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

expfLastModificationTime		1.3.6.1.4.1.9600.1.23.12.1.24
The LastModificationTime property indicates when the folder was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

expfMaximumItemSize		1.3.6.1.4.1.9600.1.23.12.1.25
The MaximumItemSize property specifies the maximum size, in kilobytes, that is allowed for an individual post to the folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfMessageCount		1.3.6.1.4.1.9600.1.23.12.1.26
The MessageCount property indicates the number of messages in a public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfMessageWithAttachmentsCount		1.3.6.1.4.1.9600.1.23.12.1.27
The MessageWithAttachmentsCount property indicates the total number of normal messages with attachments in the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfName		1.3.6.1.4.1.9600.1.23.12.1.28
The Name property indicates the name of the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfNormalMessageSize		1.3.6.1.4.1.9600.1.23.12.1.29
The NormalMessageSize property indicates the total size, in bytes, of all of the normal messages in the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfOwnerCount		1.3.6.1.4.1.9600.1.23.12.1.30
The OwnerCount property indicates the number of owners of the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfParentFriendlyUrl		1.3.6.1.4.1.9600.1.23.12.1.31
The ParentFriendlyUrl property indicates the folder path-based URL to the parent of the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfPath		1.3.6.1.4.1.9600.1.23.12.1.32
The Path property indicates the folder path minus the URL http://server/vroot header portion.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfProhibitPostLimit		1.3.6.1.4.1.9600.1.23.12.1.33
The ProhibitPostLimit property specifies the folder size limit, in kilobytes, when posting is prevented.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfPublishInAddressBook		1.3.6.1.4.1.9600.1.23.12.1.34
The PublishInAddressBook property specifies whether the folder will show up in the global address list if it is mail-enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfRecipientCountOnAssociateMsg		1.3.6.1.4.1.9600.1.23.12.1.35
The RecipientCountOnAssociatedMessages property indicates the total number of recipients on the associated messages in the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfRecipientCountOnNormalMsg		1.3.6.1.4.1.9600.1.23.12.1.36
The RecipientCountOnNormalMessages property indicates the total number of recipients on the normal messages in the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfReplicaAgeLimit		1.3.6.1.4.1.9600.1.23.12.1.37
The ReplicaAgeLimit property specifies the age limit for messages across all replicas.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfReplicaList		1.3.6.1.4.1.9600.1.23.12.1.38
The ReplicaList property indicates the list of distinguished names of the MDBs to which the folder is replicated.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfReplicationMessagePriority		1.3.6.1.4.1.9600.1.23.12.1.39
The ReplicationMessagePriority property specifies the priority level for replicating folder messages.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notUrgent(0), normal(1), urgent(2)

expfReplicationSchedule		1.3.6.1.4.1.9600.1.23.12.1.40
The array elements of the ReplicationSchedule property specify the replication schedule of the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfReplicationStyle		1.3.6.1.4.1.9600.1.23.12.1.41
The ReplicationStyle property specifies how often the folder contents are replicated.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	custom(0), never(1), always(2), everyHour(3), everyTwoHours(4), everyFourHours(5), usePublicStoreSchedule(6)

expfRestrictionCount		1.3.6.1.4.1.9600.1.23.12.1.42
The RestrictionCount property indicates the total number of restrictions on the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfSecurityDescriptor		1.3.6.1.4.1.9600.1.23.12.1.43
The SecurityDescriptor property specifies the administrative security descriptor for the folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfStorageLimitStyle		1.3.6.1.4.1.9600.1.23.12.1.44
The StorageLimitStyle property specifies whether the folder should use public store storage limits, have no quota, or use quota values set on the folder.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	usePublicStoreStyle(0), useSpecifiedQuota(1), noQuota(2)

expfTargetAddress		1.3.6.1.4.1.9600.1.23.12.1.45
The TargetAddress property is a MAPI property that contains the e-mail address of the public folder.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfTotalMessageSize		1.3.6.1.4.1.9600.1.23.12.1.46
The TotalMessageSize property indicates the total size, in bytes, of all of the normal messages in the public folder. The TotalMessageSize property is an 8-byte version of the NormalMessageSize property.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

expfUrl		1.3.6.1.4.1.9600.1.23.12.1.47
The Url property indicates the folder URL, constructed using the folder globally unique identifier (GUID).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

expfUsePublicStoreAgeLimits		1.3.6.1.4.1.9600.1.23.12.1.48
The UsePublicStoreAgeLimits property specifies whether the folder should use the age limits of the MDB in which it is stored.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfUsePublicStoreDelItemLifetm		1.3.6.1.4.1.9600.1.23.12.1.49
The UsePublicStoreDeletedItemLifetime property specifies whether the folder should use the deleted item lifetime of the local public MDB.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

expfWarningLimit		1.3.6.1.4.1.9600.1.23.12.1.50
The WarningLimit property specifies the folder size limit, in kilobytes, when warning messages are sent.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exchangeQueueV2Table		1.3.6.1.4.1.9600.1.23.13
The Exchange_Queue WMI class provides properties and methods for working with Microsoft Exchange queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueV2Entry

exchangeQueueV2Entry		1.3.6.1.4.1.9600.1.23.13.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueV2Entry

exq2Index		1.3.6.1.4.1.9600.1.23.13.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exq2CanEnumAll		1.3.6.1.4.1.9600.1.23.13.1.2
The CanEnumAll property indicates whether the queue can enumerate all of the messages that it has waiting for transmission.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exq2GlobalStop		1.3.6.1.4.1.9600.1.23.13.1.3
The GlobalStop property indicates whether the virtual server for the queue is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exq2LinkId		1.3.6.1.4.1.9600.1.23.13.1.4
The LinkId property indicates the identifier for the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2LinkName		1.3.6.1.4.1.9600.1.23.13.1.5
The LinkName property indicates the name of the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2MessageCount		1.3.6.1.4.1.9600.1.23.13.1.6
The MessageCount property indicates the number of messages in the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exq2MsgEnumFlagsSupported		1.3.6.1.4.1.9600.1.23.13.1.7
The MsgEnumFlagsSupported property contains a mask of all enumeration flags for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exq2ProtocolName		1.3.6.1.4.1.9600.1.23.13.1.8
The ProtocolName property indicates the transmission protocol for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2QueueId		1.3.6.1.4.1.9600.1.23.13.1.9
The QueueId property indicates the identifier of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2QueueName		1.3.6.1.4.1.9600.1.23.13.1.10
The QueueName property indicates the name of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2Size		1.3.6.1.4.1.9600.1.23.13.1.11
The Size property indicates the message size, including attachments, in bytes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2Version		1.3.6.1.4.1.9600.1.23.13.1.12
The Version property indicates the version of the service that created the message tracking log entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exq2VirtualMachine		1.3.6.1.4.1.9600.1.23.13.1.13
The VirtualMachine property indicates the name of the virtual machine that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exq2VirtualServerName		1.3.6.1.4.1.9600.1.23.13.1.14
The VirtualServerName property indicates the name of the virtual server the queue is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueueCacheReloadEvtTable		1.3.6.1.4.1.9600.1.23.14
Instances of the Exchange_QueueCacheReloadEvent class provide information about when the queue's cache was reloaded.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueCacheReloadEventEntry

exchangeQueueCacheReloadEvtEntry		1.3.6.1.4.1.9600.1.23.14.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueCacheReloadEventEntry

exqcreIndex		1.3.6.1.4.1.9600.1.23.14.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqcreReloadTime		1.3.6.1.4.1.9600.1.23.14.1.2
The ReloadTime property indicates the last time that the queue provider updated its data.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exchangeQueuedMessageTable		1.3.6.1.4.1.9600.1.23.15
The Exchange_QueuedMessage WMI class is the base class for the Exchange_QueuedX400Message and Exchange_QueuedSMTPMessage classes. The Exchange_QueuedMessage class provides information about messages that reside in Microsoft Exchange queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueuedMessageEntry

exchangeQueuedMessageEntry		1.3.6.1.4.1.9600.1.23.15.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueuedMessageEntry

exqmIndex		1.3.6.1.4.1.9600.1.23.15.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqmActionDeleteNDR		1.3.6.1.4.1.9600.1.23.15.1.2
The ActionDeleteNDR property indicates whether the message supports the DeleteWithNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmActionDeleteNoNDR		1.3.6.1.4.1.9600.1.23.15.1.3
The ActionDeleteNoNDR property indicates whether the message supports the DeleteWithoutNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmActionFreeze		1.3.6.1.4.1.9600.1.23.15.1.4
The ActionFreeze property indicates whether the message supports the Freeze method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmActionThaw		1.3.6.1.4.1.9600.1.23.15.1.5
The ActionThaw property indicates whether the message supports the Thaw method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmExpiry		1.3.6.1.4.1.9600.1.23.15.1.6
The Expiry property indicates the expiration time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqmHighPriority		1.3.6.1.4.1.9600.1.23.15.1.7
The HighPriority property indicates whether the message has high priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmLinkId		1.3.6.1.4.1.9600.1.23.15.1.8
The LinkId property indicates the identifier for the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmLinkName		1.3.6.1.4.1.9600.1.23.15.1.9
The LinkName property indicates the name of the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmLowPriority		1.3.6.1.4.1.9600.1.23.15.1.10
The LowPriority property indicates whether the message has low priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmMessageId		1.3.6.1.4.1.9600.1.23.15.1.11
The MessageId property indicates the identifier of the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmNormalPriority		1.3.6.1.4.1.9600.1.23.15.1.12
The NormalPriority property indicates whether the message has normal priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmProtocolName		1.3.6.1.4.1.9600.1.23.15.1.13
The ProtocolName property indicates the transmission protocol for the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmQueueId		1.3.6.1.4.1.9600.1.23.15.1.14
The QueueId property indicates the identifier of the queue that the queued message is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmQueueName		1.3.6.1.4.1.9600.1.23.15.1.15
The QueueName property indicates the name of the queue that contains the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmReceived		1.3.6.1.4.1.9600.1.23.15.1.16
The Received property indicates the received time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqmRecipientCount		1.3.6.1.4.1.9600.1.23.15.1.17
The RecipientCount property indicates the number of recipients in the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqmRecipients		1.3.6.1.4.1.9600.1.23.15.1.18
The Recipients property indicates the recipients of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmSender		1.3.6.1.4.1.9600.1.23.15.1.19
The Sender property indicates the name of the sender.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmSize		1.3.6.1.4.1.9600.1.23.15.1.20
The Size property indicates the size of the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqmStateFlags		1.3.6.1.4.1.9600.1.23.15.1.21
The StateFlags property contains a mask of all of the state flags for the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqmStateFrozen		1.3.6.1.4.1.9600.1.23.15.1.22
The StateFrozen property indicates whether the message is in a frozen state.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmStateRetry		1.3.6.1.4.1.9600.1.23.15.1.23
The StateRetry property indicates that transmission is being retried for a message that was not delivered successfully.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqmSubject		1.3.6.1.4.1.9600.1.23.15.1.24
The Subject property indicates the subject of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmSubmission		1.3.6.1.4.1.9600.1.23.15.1.25
The Submission property indicates the submission time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqmVersion		1.3.6.1.4.1.9600.1.23.15.1.26
The Version property indicates the version of the Queue Application Programming Interface (QAPI) used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqmVirtualMachine		1.3.6.1.4.1.9600.1.23.15.1.27
The VirtualMachine property indicates the name of the virtual machine that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqmVirtualServerName		1.3.6.1.4.1.9600.1.23.15.1.28
The VirtualServerName property indicates the name of the virtual server that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueueVirtualServerTable		1.3.6.1.4.1.9600.1.23.16
The Exchange_QueueVirtualServer Class is the Base class for the Exchange_QueueSMTPVirtualServer and Exchange_QueueX400VirtualServer classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueVirtualServerEntry

exchangeQueueVirtualServerEntry		1.3.6.1.4.1.9600.1.23.16.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueVirtualServerEntry

exvsIndex		1.3.6.1.4.1.9600.1.23.16.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exvsGlobalActionsSupported		1.3.6.1.4.1.9600.1.23.16.1.2
The GlobalActionsSupported property indicates whether all remote connections for the virtual server can be controlled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exvsGlobalStop		1.3.6.1.4.1.9600.1.23.16.1.3
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exvsProtocolName		1.3.6.1.4.1.9600.1.23.16.1.4
The ProtocolName property indicates the name of the protocol for the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exvsVirtualMachine		1.3.6.1.4.1.9600.1.23.16.1.5
The VirtualMachine property indicates the name of the virtual machine that contains the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exvsVirtualServerName		1.3.6.1.4.1.9600.1.23.16.1.6
The VirtualServerName property indicates the name of the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeServerTable		1.3.6.1.4.1.9600.1.23.17
Instances of the Exchange_Server WMI class provide properties and methods for working with Exchange servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeServerEntry

exchangeServerEntry		1.3.6.1.4.1.9600.1.23.17.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeServerEntry

exsIndex		1.3.6.1.4.1.9600.1.23.17.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exsAdministrativeGroup		1.3.6.1.4.1.9600.1.23.17.1.2
The AdministrativeGroup property indicates the name of the Exchange 2000 administrator group to which the server belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsAdministrativeNote		1.3.6.1.4.1.9600.1.23.17.1.3
The AdministrativeNote property specifies the administrative note for the server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsCreationTime		1.3.6.1.4.1.9600.1.23.17.1.4
The CreationTime property indicates when the Active Directory object was created.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exsDN		1.3.6.1.4.1.9600.1.23.17.1.5
The DN property indicates the distinguished name attribute on the server object in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsExchangeVersion		1.3.6.1.4.1.9600.1.23.17.1.6
The ExchangeVersion property indicates the product version information, including build and service pack number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsFQDN		1.3.6.1.4.1.9600.1.23.17.1.7
The FQDN property indicates the fully qualified domain name of the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsGUID		1.3.6.1.4.1.9600.1.23.17.1.8
The GUID property indicates the globally unique identifier (GUID) attribute of the server object in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsIsFrontEndServer		1.3.6.1.4.1.9600.1.23.17.1.9
The IsFrontEndServer property indicates whether the server is a front-end server.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsLastModificationTime		1.3.6.1.4.1.9600.1.23.17.1.10
The LastModificationTime property indicates when the Active Directory object was last modified.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exsMessageTrackingEnabled		1.3.6.1.4.1.9600.1.23.17.1.11
The MessageTrackingEnabled property indicates whether message tracking is enabled on the server.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsMessageTrackingLogFileLifetm		1.3.6.1.4.1.9600.1.23.17.1.12
The MessageTrackingLogFileLifetime property specifies how long message tracking logs are to be kept.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsMessageTrackingLogFilePath		1.3.6.1.4.1.9600.1.23.17.1.13
The MessageTrackingLogFilePath property indicates the location where message tracking logs are stored
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsMonitoringEnabled		1.3.6.1.4.1.9600.1.23.17.1.14
The MonitoringEnabled property specifies whether monitoring is enabled on the server.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsMTADataPath		1.3.6.1.4.1.9600.1.23.17.1.15
The MTADataPath property indicates the location of the MTA queue files.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsName		1.3.6.1.4.1.9600.1.23.17.1.16
The Name property indicates the NetBIOS name of the Exchange server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsRoutingGroup		1.3.6.1.4.1.9600.1.23.17.1.17
The RoutingGroup property indicates the name of the Exchange 2000 routing group to which the server belongs.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsSubjectLoggingEnabled		1.3.6.1.4.1.9600.1.23.17.1.18
The SubjectLoggingEnabled property controls whether message subjects are included in message tracking logs. It also controls whether subjects are displayed in the queue viewer.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsType		1.3.6.1.4.1.9600.1.23.17.1.19
The Type property indicates the server type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	standard(0), enterprise(1), conferencing(2)

exchangeQueuedSMTPMessageTable		1.3.6.1.4.1.9600.1.23.18
The Exchange_QueuedSMTPMessage class provides methods to work with Microsoft Exchange messages currently in an SMTP queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueuedSMTPMessage

exchangeQueuedSMTPMessageEntry		1.3.6.1.4.1.9600.1.23.18.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueuedSMTPMessage

exqsmIndex		1.3.6.1.4.1.9600.1.23.18.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqsmActionDeleteNDR		1.3.6.1.4.1.9600.1.23.18.1.2
The ActionDeleteNDR property indicates whether the message supports the DeleteWithNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmActionDeleteNoNDR		1.3.6.1.4.1.9600.1.23.18.1.3
The ActionDeleteNoNDR property indicates whether the message supports the DeleteWithoutNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmActionFreeze		1.3.6.1.4.1.9600.1.23.18.1.4
The ActionFreeze property indicates whether the message supports the Freeze method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmActionThaw		1.3.6.1.4.1.9600.1.23.18.1.5
The ActionThaw property indicates whether the message supports the Thaw method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmExpiry		1.3.6.1.4.1.9600.1.23.18.1.6
The Expiry property indicates the expiration time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqsmHighPriority		1.3.6.1.4.1.9600.1.23.18.1.7
The HighPriority property indicates whether the message has high priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmLinkId		1.3.6.1.4.1.9600.1.23.18.1.8
The LinkId property indicates the identifier for the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmLinkName		1.3.6.1.4.1.9600.1.23.18.1.9
The LinkName property indicates the name of the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmLowPriority		1.3.6.1.4.1.9600.1.23.18.1.10
The LowPriority property indicates whether the message has low priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmMessageId		1.3.6.1.4.1.9600.1.23.18.1.11
The MessageId property indicates the identifier of the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmNormalPriority		1.3.6.1.4.1.9600.1.23.18.1.12
The NormalPriority property indicates whether the message has normal priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmProtocolName		1.3.6.1.4.1.9600.1.23.18.1.13
The ProtocolName property indicates the transmission protocol for the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmQueueId		1.3.6.1.4.1.9600.1.23.18.1.14
The QueueId property indicates the identifier of the queue that the queued message is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmQueueName		1.3.6.1.4.1.9600.1.23.18.1.15
The QueueName property indicates the name of the queue that contains the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmReceived		1.3.6.1.4.1.9600.1.23.18.1.16
The Received property indicates the received time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqsmRecipientCount		1.3.6.1.4.1.9600.1.23.18.1.17
The RecipientCount property indicates the number of recipients in the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqsmRecipients		1.3.6.1.4.1.9600.1.23.18.1.18
The Recipients property indicates the recipients of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmSender		1.3.6.1.4.1.9600.1.23.18.1.19
The Sender property indicates the name of the sender.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmSize		1.3.6.1.4.1.9600.1.23.18.1.20
The Size property indicates the size of the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqsmStateFlags		1.3.6.1.4.1.9600.1.23.18.1.21
The StateFlags property contains a mask of all of the state flags for the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqsmStateFrozen		1.3.6.1.4.1.9600.1.23.18.1.22
The StateFrozen property indicates whether the message is in a frozen state.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmStateRetry		1.3.6.1.4.1.9600.1.23.18.1.23
The StateRetry property indicates that transmission is being retried for a message that was not successfully delivered.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsmSubject		1.3.6.1.4.1.9600.1.23.18.1.24
The Subject property indicates the subject of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmSubmission		1.3.6.1.4.1.9600.1.23.18.1.25
The Submission property indicates the submission time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqsmVersion		1.3.6.1.4.1.9600.1.23.18.1.26
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqsmVirtualMachine		1.3.6.1.4.1.9600.1.23.18.1.27
The VirtualMachine property indicates the name of the virtual machine that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsmVirtualServerName		1.3.6.1.4.1.9600.1.23.18.1.28
The VirtualServerName property indicates the name of the virtual server that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueuedX400MessageTable		1.3.6.1.4.1.9600.1.23.19
The Exchange_QueuedX400Message class provides methods to work with Microsoft Exchange messages currently in an X400 queue.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueuedX400Message

exchangeQueuedX400MessageEntry		1.3.6.1.4.1.9600.1.23.19.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueuedX400Message

exqxmIndex		1.3.6.1.4.1.9600.1.23.19.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqxmActionDeleteNDR		1.3.6.1.4.1.9600.1.23.19.1.2
The ActionDeleteNDR property indicates whether the message supports the DeleteWithNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmActionDeleteNoNDR		1.3.6.1.4.1.9600.1.23.19.1.3
The ActionDeleteNoNDR property indicates whether the message supports the DeleteWithoutNDR method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmActionFreeze		1.3.6.1.4.1.9600.1.23.19.1.4
The ActionFreeze property indicates whether the message supports the Freeze method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmActionThaw		1.3.6.1.4.1.9600.1.23.19.1.5
The ActionThaw property indicates whether the message supports the Thaw method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmExpiry		1.3.6.1.4.1.9600.1.23.19.1.6
The Expiry property indicates the expiration time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqxmHighPriority		1.3.6.1.4.1.9600.1.23.19.1.7
The HighPriority property indicates whether the message has high priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmLinkId		1.3.6.1.4.1.9600.1.23.19.1.8
The LinkId property indicates the identifier for the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmLinkName		1.3.6.1.4.1.9600.1.23.19.1.9
The LinkName property indicates the name of the link that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmLowPriority		1.3.6.1.4.1.9600.1.23.19.1.10
The LowPriority property indicates whether the message has low priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmMessageId		1.3.6.1.4.1.9600.1.23.19.1.11
The MessageId property indicates the identifier of the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmNormalPriority		1.3.6.1.4.1.9600.1.23.19.1.12
The NormalPriority property indicates whether the message has normal priority.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmProtocolName		1.3.6.1.4.1.9600.1.23.19.1.13
The ProtocolName property indicates the transmission protocol for the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmQueueId		1.3.6.1.4.1.9600.1.23.19.1.14
The QueueId property indicates the identifier of the queue that the queued message is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmQueueName		1.3.6.1.4.1.9600.1.23.19.1.15
The QueueName property indicates the name of the queue that contains the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmReceived		1.3.6.1.4.1.9600.1.23.19.1.16
The Received property indicates the received time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqxmRecipientCount		1.3.6.1.4.1.9600.1.23.19.1.17
The RecipientCount property indicates the number of recipients in the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqxmRecipients		1.3.6.1.4.1.9600.1.23.19.1.18
The Recipients property indicates the recipients of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmSender		1.3.6.1.4.1.9600.1.23.19.1.19
The Sender property indicates the name of the sender.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmSize		1.3.6.1.4.1.9600.1.23.19.1.20
The Size property indicates the size of the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqxmStateFlags		1.3.6.1.4.1.9600.1.23.19.1.21
The StateFlags property contains a mask of all of the state flags for the message.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqxmStateFrozen		1.3.6.1.4.1.9600.1.23.19.1.22
The StateFrozen property indicates whether the message is in a frozen state.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmStateRetry		1.3.6.1.4.1.9600.1.23.19.1.23
The StateRetry property indicates that transmission is being retried for a message that was not successfully delivered.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxmSubject		1.3.6.1.4.1.9600.1.23.19.1.24
The Subject property indicates the subject of the message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmSubmission		1.3.6.1.4.1.9600.1.23.19.1.25
The Submission property indicates the submission time stamp for the message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exqxmVersion		1.3.6.1.4.1.9600.1.23.19.1.26
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exqxmVirtualMachine		1.3.6.1.4.1.9600.1.23.19.1.27
The VirtualMachine property indicates the name of the virtual machine that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxmVirtualServerName		1.3.6.1.4.1.9600.1.23.19.1.28
The VirtualServerName property indicates the name of the virtual server that contains the queued message.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueueSMTPVirtualSrvTable		1.3.6.1.4.1.9600.1.23.20
The Exchange_QueueSMTPVirtualServer class returns properties for SMTP queue virtual servers. This class provides two methods in addition to the properties it inherits from the Exchange_QueueVirtualServer class.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueSMTPVirtualServer

exchangeQueueSMTPVirtualSrvEntry		1.3.6.1.4.1.9600.1.23.20.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueSMTPVirtualServer

exqsvsIndex		1.3.6.1.4.1.9600.1.23.20.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqsvsGlobalActionsSupported		1.3.6.1.4.1.9600.1.23.20.1.2
The GlobalActionsSupported property indicates whether all remote connections for the virtual server can be controlled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsvsGlobalStop		1.3.6.1.4.1.9600.1.23.20.1.3
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqsvsProtocolName		1.3.6.1.4.1.9600.1.23.20.1.4
The ProtocolName property indicates the name of the protocol for the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsvsVirtualMachine		1.3.6.1.4.1.9600.1.23.20.1.5
The VirtualMachine property indicates the name of the virtual machine that contains the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqsvsVirtualServerName		1.3.6.1.4.1.9600.1.23.20.1.6
The VirtualServerName property indicates the name of the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeQueueX400VirtualSrvTable		1.3.6.1.4.1.9600.1.23.21
The Exchange_QueueX400VirtualServer class returns properties for X400 queue virtual servers. This class inherits all its properties from the Exchange_QueueVirtualServer class.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeQueueX400VirtualServer

exchangeQueueX400VirtualSrvEntry		1.3.6.1.4.1.9600.1.23.21.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeQueueX400VirtualServer

exqxvsIndex		1.3.6.1.4.1.9600.1.23.21.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exqxvsGlobalActionsSupported		1.3.6.1.4.1.9600.1.23.21.1.2
The GlobalActionsSupported property indicates whether all remote connections for the virtual server can be controlled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxvsGlobalStop		1.3.6.1.4.1.9600.1.23.21.1.3
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exqxvsProtocolName		1.3.6.1.4.1.9600.1.23.21.1.4
The ProtocolName property indicates the name of the protocol for the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxvsVirtualMachine		1.3.6.1.4.1.9600.1.23.21.1.5
The VirtualMachine property indicates the name of the virtual machine that contains the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exqxvsVirtualServerName		1.3.6.1.4.1.9600.1.23.21.1.6
The VirtualServerName property indicates the name of the virtual server.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeScheduleIntervalTable		1.3.6.1.4.1.9600.1.23.22
The Exchange_ScheduleInterval WMI class provides information about the start and stop time of the public folder replication schedule. Instances of the Exchange_ScheduleInterval class are returned as members of an array from the ReplicationSchedule Property.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeScheduleInterval

exchangeScheduleIntervalEntry		1.3.6.1.4.1.9600.1.23.22.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeScheduleInterval

exsiIndex		1.3.6.1.4.1.9600.1.23.22.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exsiStartTime		1.3.6.1.4.1.9600.1.23.22.1.2
The StartTime property indicates the start time, formatted as 0000dd-hhmm00:000000.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exsiStopTime		1.3.6.1.4.1.9600.1.23.22.1.3
The StopTime property indicates the stop time, formatted as 0000dd-hhmm00:000000.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exchangeSMTPLinkTable		1.3.6.1.4.1.9600.1.23.23
The Exchange_SMTPLink Class provides methods for controlling an Microsoft Exchange Link. The Exchange_SMTPLink class inherits all the properties of the Exchange_Link class.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeSMTPLink

exchangeSMTPLinkEntry		1.3.6.1.4.1.9600.1.23.23.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeSMTPLink

exslIndex		1.3.6.1.4.1.9600.1.23.23.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exslActionFreeze		1.3.6.1.4.1.9600.1.23.23.1.2
The ActionFreeze property indicates whether the link supports the Freeze method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslActionKick		1.3.6.1.4.1.9600.1.23.23.1.3
The ActionKick property indicates whether the link supports the ForceConnection method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslActionThaw		1.3.6.1.4.1.9600.1.23.23.1.4
The ActionThaw property indicates whether the link supports the Thaw method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslExtendedStateInfo		1.3.6.1.4.1.9600.1.23.23.1.5
The ExtendedStateInfo property indicates extended error and reporting troubleshooting information.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslGlobalStop		1.3.6.1.4.1.9600.1.23.23.1.6
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslLinkDN		1.3.6.1.4.1.9600.1.23.23.1.7
The LinkDN property indicates the distinguished name (DN) of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslLinkId		1.3.6.1.4.1.9600.1.23.23.1.8
The LinkId property indicates the identifier for the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslLinkName		1.3.6.1.4.1.9600.1.23.23.1.9
The LinkName property indicates the name of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslMessageCount		1.3.6.1.4.1.9600.1.23.23.1.10
The MessageCount property indicates the number of messages in the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslNextScheduledConnection		1.3.6.1.4.1.9600.1.23.23.1.11
The NextScheduledConnection property indicates the next time a connection will be attempted.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exslOldestMessage		1.3.6.1.4.1.9600.1.23.23.1.12
The OldestMessage property indicates the time stamp of the oldest message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exslProtocolName		1.3.6.1.4.1.9600.1.23.23.1.13
The ProtocolName property indicates the name of the protocol used by the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslKSize		1.3.6.1.4.1.9600.1.23.23.1.14
The Size property indicates the size of the link (in kilobytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslMSize		1.3.6.1.4.1.9600.1.23.23.1.15
The Size property indicates the size of the link (in megabytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslStateActive		1.3.6.1.4.1.9600.1.23.23.1.16
The StateActive property indicates that the link is active.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslStateFlags		1.3.6.1.4.1.9600.1.23.23.1.17
The StateFlags property contains a mask of all of the state flags for the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslStateFrozen		1.3.6.1.4.1.9600.1.23.23.1.18
The StateFrozen property indicates whether the link is currently frozen.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslStateReady		1.3.6.1.4.1.9600.1.23.23.1.19
The StateReady property indicates that the link is ready to accept new messages.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslStateRemote		1.3.6.1.4.1.9600.1.23.23.1.20
The StateRemote property indicates that the destination for messages in the link is on a remote server.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslStateRetry		1.3.6.1.4.1.9600.1.23.23.1.21
The StateRetry property indicates that the link is retrying a transmission that was unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslStateScheduled		1.3.6.1.4.1.9600.1.23.23.1.22
The StateScheduled property indicates that the link is scheduled for periodic activation.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslSupportedLinkActions		1.3.6.1.4.1.9600.1.23.23.1.23
The SupportedLinkActions property indicates the actions that are supported on the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslTypeCurrentlyUnreachable		1.3.6.1.4.1.9600.1.23.23.1.24
The TypeCurrentlyUnreachable property indicates that the link holds messages for destinations that are currently unreachable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypeDeferredDelivery		1.3.6.1.4.1.9600.1.23.23.1.25
The TypeDeferredDelivery property indicates that the link holds mail that is awaiting a trigger to start transmission.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypeInternal		1.3.6.1.4.1.9600.1.23.23.1.26
The TypeInternal property indicates that the link is used for internal message processing.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypeLocalDelivery		1.3.6.1.4.1.9600.1.23.23.1.27
The TypeLocalDelivery property indicates whether the link is used for local delivery.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypePendingCategorization		1.3.6.1.4.1.9600.1.23.23.1.28
The TypePendingCategorization property indicates that the link is for messages whose recipient addresses require resolution in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypePendingRouting		1.3.6.1.4.1.9600.1.23.23.1.29
The TypePendingRouting property indicates that the link is for routing the next message that is waiting to be transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypePendingSubmission		1.3.6.1.4.1.9600.1.23.23.1.30
The TypePendingSubmission property indicates that the link handles messages that have not yet been submitted to the routing engine.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslTypeRemoteDelivery		1.3.6.1.4.1.9600.1.23.23.1.31
The TypeRemoteDelivery property indicates whether the link is currently handling a remote message delivery.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exslVersion		1.3.6.1.4.1.9600.1.23.23.1.32
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exslVirtualMachine		1.3.6.1.4.1.9600.1.23.23.1.33
The VirtualMachine property indicates the name of the virtual machine that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exslVirtualServerName		1.3.6.1.4.1.9600.1.23.23.1.34
The VirtualServerName property indicates the name of the virtual server that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeSMTPQueueTable		1.3.6.1.4.1.9600.1.23.24
The Exchange_SMTPQueue class returns properties for SMTP queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeSMTPQueue

exchangeSMTPQueueEntry		1.3.6.1.4.1.9600.1.23.24.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeSMTPQueue

exsqIndex		1.3.6.1.4.1.9600.1.23.24.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exsqCanEnumAll		1.3.6.1.4.1.9600.1.23.24.1.2
The CanEnumAll property indicates whether the queue can enumerate all of the messages that it has waiting for transmission.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsqGlobalStop		1.3.6.1.4.1.9600.1.23.24.1.3
The GlobalStop property indicates whether the virtual server for the queue is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exsqLinkId		1.3.6.1.4.1.9600.1.23.24.1.4
The LinkId property indicates the identifier for the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqLinkName		1.3.6.1.4.1.9600.1.23.24.1.5
The LinkName property indicates the name of the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqMessageCount		1.3.6.1.4.1.9600.1.23.24.1.6
The MessageCount property indicates the number of messages in the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsqMsgEnumFlagsSupported		1.3.6.1.4.1.9600.1.23.24.1.7
The MsgEnumFlagsSupported property contains a mask of all enumeration flags for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsqProtocolName		1.3.6.1.4.1.9600.1.23.24.1.8
The ProtocolName property indicates transmission protocol for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqQueueId		1.3.6.1.4.1.9600.1.23.24.1.9
The QueueId property indicates the identifier of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqQueueName		1.3.6.1.4.1.9600.1.23.24.1.10
The QueueName property indicates the name of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqKSize		1.3.6.1.4.1.9600.1.23.24.1.11
The Size property indicates the size of the queue (in kilobytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsqMSize		1.3.6.1.4.1.9600.1.23.24.1.12
The Size property indicates the size of the queue (in megabytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsqVersion		1.3.6.1.4.1.9600.1.23.24.1.13
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exsqVirtualMachine		1.3.6.1.4.1.9600.1.23.24.1.14
The VirtualMachine property indicates the name of the virtual machine that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exsqVirtualServerName		1.3.6.1.4.1.9600.1.23.24.1.15
The VirtualServerName property indicates the name of the virtual server the queue is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeX400LinkTable		1.3.6.1.4.1.9600.1.23.25
The Exchange_X400Link Class provides methods for controlling an Microsoft Exchange Link. The Exchange_SMTPLink class inherits all the properties of the Exchange_Link class.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeX400Link

exchangeX400LinkEntry		1.3.6.1.4.1.9600.1.23.25.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeX400Link

exxlIndex		1.3.6.1.4.1.9600.1.23.25.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exxlActionFreeze		1.3.6.1.4.1.9600.1.23.25.1.2
The ActionFreeze property indicates whether the link supports the Freeze method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlActionKick		1.3.6.1.4.1.9600.1.23.25.1.3
The ActionKick property indicates whether the link supports the ForceConnection method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlActionThaw		1.3.6.1.4.1.9600.1.23.25.1.4
The ActionThaw property indicates whether the link supports the Thaw method.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlExtendedStateInfo		1.3.6.1.4.1.9600.1.23.25.1.5
The ExtendedStateInfo property indicates extended error and reporting troubleshooting information.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlGlobalStop		1.3.6.1.4.1.9600.1.23.25.1.6
The GlobalStop property indicates whether the virtual server for the link is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlLinkDN		1.3.6.1.4.1.9600.1.23.25.1.7
The LinkDN property indicates the distinguished name (DN) of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlLinkId		1.3.6.1.4.1.9600.1.23.25.1.8
The LinkId property indicates the identifier for the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlLinkName		1.3.6.1.4.1.9600.1.23.25.1.9
The LinkName property indicates the name of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlMessageCount		1.3.6.1.4.1.9600.1.23.25.1.10
The MessageCount property indicates the number of messages in the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlNextScheduledConnection		1.3.6.1.4.1.9600.1.23.25.1.11
The NextScheduledConnection property indicates the next time a connection will be attempted.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exxlOldestMessage		1.3.6.1.4.1.9600.1.23.25.1.12
The OldestMessage property indicates the time stamp of the oldest message.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

exxlProtocolName		1.3.6.1.4.1.9600.1.23.25.1.13
The ProtocolName property indicates the name of the protocol used by the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlKSize		1.3.6.1.4.1.9600.1.23.25.1.14
The Size property indicates the size of the link (in kilobytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlMSize		1.3.6.1.4.1.9600.1.23.25.1.15
The Size property indicates the size of the link (in megabytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlStateActive		1.3.6.1.4.1.9600.1.23.25.1.16
The StateActive property indicates that the link is active.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlStateFlags		1.3.6.1.4.1.9600.1.23.25.1.17
The StateFlags property contains a mask of all of the state flags for the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlStateFrozen		1.3.6.1.4.1.9600.1.23.25.1.18
The StateFrozen property indicates whether the link is currently frozen.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlStateReady		1.3.6.1.4.1.9600.1.23.25.1.19
The StateReady property indicates that the link is ready to accept new messages.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlStateRemote		1.3.6.1.4.1.9600.1.23.25.1.20
The StateRemote property indicates that the destination for messages in the link is on a remote server.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlStateRetry		1.3.6.1.4.1.9600.1.23.25.1.21
The StateRetry property indicates that the link is retrying a transmission that was unsuccessful.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlStateScheduled		1.3.6.1.4.1.9600.1.23.25.1.22
The StateScheduled property indicates that the link is scheduled for periodic activation.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlSupportedLinkActions		1.3.6.1.4.1.9600.1.23.25.1.23
The SupportedLinkActions property indicates the actions that are supported on the link.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlTypeCurrentlyUnreachable		1.3.6.1.4.1.9600.1.23.25.1.24
The TypeCurrentlyUnreachable property indicates that the link holds messages for destinations that are currently unreachable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypeDeferredDelivery		1.3.6.1.4.1.9600.1.23.25.1.25
The TypeDeferredDelivery property indicates that the link holds mail that is awaiting a trigger to start transmission.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypeInternal		1.3.6.1.4.1.9600.1.23.25.1.26
The TypeInternal property indicates that the link is used for internal message processing.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypeLocalDelivery		1.3.6.1.4.1.9600.1.23.25.1.27
The TypeLocalDelivery property indicates whether the link is used for local delivery.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypePendingCategorization		1.3.6.1.4.1.9600.1.23.25.1.28
The TypePendingCategorization property indicates that the link is for messages whose recipient addresses require resolution in Microsoft Active Directory.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypePendingRouting		1.3.6.1.4.1.9600.1.23.25.1.29
The TypePendingRouting property indicates that the link is for routing the next message that is waiting to be transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypePendingSubmission		1.3.6.1.4.1.9600.1.23.25.1.30
The TypePendingSubmission property indicates that the link handles messages that have not yet been submitted to the routing engine.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlTypeRemoteDelivery		1.3.6.1.4.1.9600.1.23.25.1.31
The TypeRemoteDelivery property indicates whether the link is currently handling a remote message delivery.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxlVersion		1.3.6.1.4.1.9600.1.23.25.1.32
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxlVirtualMachine		1.3.6.1.4.1.9600.1.23.25.1.33
The VirtualMachine property indicates the name of the virtual machine that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxlVirtualServerName		1.3.6.1.4.1.9600.1.23.25.1.34
The VirtualServerName property indicates the name of the virtual server that is the source of the link.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exchangeX400QueueTable		1.3.6.1.4.1.9600.1.23.26
The Exchange_X400Queue class returns properties for X400 queues.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExchangeX400Queue

exchangeX400QueueEntry		1.3.6.1.4.1.9600.1.23.26.1
None
Status: current	Access: not-accessible
OBJECT-TYPE
	ExchangeX400Queue

exxqIndex		1.3.6.1.4.1.9600.1.23.26.1.1
The value of this object uniquely identifies the instance entry for this class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..2147483647

exxqCanEnumAll		1.3.6.1.4.1.9600.1.23.26.1.2
The CanEnumAll property indicates whether the queue can enumerate all of the messages that it has waiting for transmission.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxqGlobalStop		1.3.6.1.4.1.9600.1.23.26.1.3
The GlobalStop property indicates whether the virtual server for the queue is in disabled mode. If True, the virtual server is disabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

exxqLinkId		1.3.6.1.4.1.9600.1.23.26.1.4
The LinkId property indicates the identifier for the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqLinkName		1.3.6.1.4.1.9600.1.23.26.1.5
The LinkName property indicates the name of the link that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqMessageCount		1.3.6.1.4.1.9600.1.23.26.1.6
The MessageCount property indicates the number of messages in the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxqMsgEnumFlagsSupported		1.3.6.1.4.1.9600.1.23.26.1.7
The MsgEnumFlagsSupported property contains a mask of all enumeration flags for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxqProtocolName		1.3.6.1.4.1.9600.1.23.26.1.8
The ProtocolName property indicates transmission protocol for the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqQueueId		1.3.6.1.4.1.9600.1.23.26.1.9
The QueueId property indicates the identifier of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqQueueName		1.3.6.1.4.1.9600.1.23.26.1.10
The QueueName property indicates the name of the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqKSize		1.3.6.1.4.1.9600.1.23.26.1.11
The Size property indicates the size of the queue (in kilobytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxqMSize		1.3.6.1.4.1.9600.1.23.26.1.12
The Size property indicates the size of the queue (in megabytes).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxqVersion		1.3.6.1.4.1.9600.1.23.26.1.13
The Version property indicates the version of the QAPI used to generate the WMI object.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

exxqVirtualMachine		1.3.6.1.4.1.9600.1.23.26.1.14
The VirtualMachine property indicates the name of the virtual machine that contains the queue.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

exxqVirtualServerName		1.3.6.1.4.1.9600.1.23.26.1.15
The VirtualServerName property indicates the name of the virtual server the queue is on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString