IEEE8021-PBB-MIB

File: IEEE8021-PBB-MIB.mib (47448 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
IEEE8021-TC-MIB IEEE8021-BRIDGE-MIB Q-BRIDGE-MIB
IF-MIB SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Integer32 RowStatus StorageType
MacAddress TruthValue SnmpAdminString
ieee802dot1mibs IEEE8021PbbComponentIdentifier IEEE8021BridgePortNumber
IEEE8021PbbServiceIdentifier IEEE8021PbbServiceIdentifierOrUnassigned IEEE8021PbbIngressEgress
IEEE8021PriorityValue IEEE8021PriorityCodePoint egress
ingress ieee8021BridgeBasePortComponentId ieee8021BridgeBasePort
VlanId InterfaceIndex InterfaceIndexOrZero
MODULE-COMPLIANCE OBJECT-GROUP

Defined Types

Ieee8021PbbVipEntry  
SEQUENCE    
  ieee8021PbbVipPipIfIndex InterfaceIndexOrZero
  ieee8021PbbVipISid IEEE8021PbbServiceIdentifierOrUnassigned
  ieee8021PbbVipDefaultDstBMAC MacAddress
  ieee8021PbbVipType IEEE8021PbbIngressEgress
  ieee8021PbbVipRowStatus RowStatus
  ieee8021PbbVipEnableConnectionId TruthValue

Ieee8021PbbISidToVipEntry  
SEQUENCE    
  ieee8021PbbISidToVipISid IEEE8021PbbServiceIdentifier
  ieee8021PbbISidToVipComponentId IEEE8021PbbComponentIdentifier
  ieee8021PbbISidToVipPort IEEE8021BridgePortNumber

Ieee8021PbbPipEntry  
SEQUENCE    
  ieee8021PbbPipIfIndex InterfaceIndex
  ieee8021PbbPipBMACAddress MacAddress
  ieee8021PbbPipName SnmpAdminString
  ieee8021PbbPipIComponentId IEEE8021PbbComponentIdentifier
  ieee8021PbbPipVipMap STRING
  ieee8021PbbPipVipMap1 STRING
  ieee8021PbbPipVipMap2 STRING
  ieee8021PbbPipVipMap3 STRING
  ieee8021PbbPipVipMap4 STRING
  ieee8021PbbPipRowStatus RowStatus

Ieee8021PbbPipPriorityEntry  
SEQUENCE    
  ieee8021PbbPipPriorityCodePointSelection IEEE8021PriorityCodePoint
  ieee8021PbbPipUseDEI TruthValue
  ieee8021PbbPipRequireDropEncoding TruthValue

Ieee8021PbbPipDecodingEntry  
SEQUENCE    
  ieee8021PbbPipDecodingPriorityCodePointRow IEEE8021PriorityCodePoint
  ieee8021PbbPipDecodingPriorityCodePoint Integer32
  ieee8021PbbPipDecodingPriority IEEE8021PriorityValue
  ieee8021PbbPipDecodingDropEligible TruthValue

Ieee8021PbbPipEncodingEntry  
SEQUENCE    
  ieee8021PbbPipEncodingPriorityCodePointRow IEEE8021PriorityCodePoint
  ieee8021PbbPipEncodingPriorityCodePoint Integer32
  ieee8021PbbPipEncodingDropEligible TruthValue
  ieee8021PbbPipEncodingPriority IEEE8021PriorityValue

Ieee8021PbbVipToPipMappingEntry  
SEQUENCE    
  ieee8021PbbVipToPipMappingPipIfIndex InterfaceIndex
  ieee8021PbbVipToPipMappingStorageType StorageType
  ieee8021PbbVipToPipMappingRowStatus RowStatus

Ieee8021PbbCBPServiceMappingEntry  
SEQUENCE    
  ieee8021PbbCBPServiceMappingBackboneSid IEEE8021PbbServiceIdentifier
  ieee8021PbbCBPServiceMappingBVid VlanId
  ieee8021PbbCBPServiceMappingDefaultBackboneDest MacAddress
  ieee8021PbbCBPServiceMappingType IEEE8021PbbIngressEgress
  ieee8021PbbCBPServiceMappingLocalSid IEEE8021PbbServiceIdentifierOrUnassigned
  ieee8021PbbCBPServiceMappingRowStatus RowStatus

Ieee8021PbbCbpEntry  
SEQUENCE    
  ieee8021PbbCbpRowStatus RowStatus

Defined Values

ieee8021PbbMib 1.3.111.2.802.1.1.9
The Provider Backbone Bridge (PBB) MIB module for managing devices that support PBB. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
MODULE-IDENTITY    

ieee8021PbbNotifications 1.3.111.2.802.1.1.9.0
OBJECT IDENTIFIER    

ieee8021PbbObjects 1.3.111.2.802.1.1.9.1
OBJECT IDENTIFIER    

ieee8021PbbConformance 1.3.111.2.802.1.1.9.2
OBJECT IDENTIFIER    

ieee8021PbbProviderBackboneBridge 1.3.111.2.802.1.1.9.1.1
OBJECT IDENTIFIER    

ieee8021PbbBackboneEdgeBridgeObjects 1.3.111.2.802.1.1.9.1.1.1
OBJECT IDENTIFIER    

ieee8021PbbBackboneEdgeBridgeAddress 1.3.111.2.802.1.1.9.1.1.1.1
The MAC Address used by the BEB when it must be refered to in a unique fashion.
OBJECT-TYPE    
  MacAddress  

ieee8021PbbBackboneEdgeBridgeName 1.3.111.2.802.1.1.9.1.1.1.2
A text string of locally determined significance. This value must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ieee8021PbbNumberOfIComponents 1.3.111.2.802.1.1.9.1.1.1.3
The number of I-components in this BEB.
OBJECT-TYPE    
  Unsigned32  

ieee8021PbbNumberOfBComponents 1.3.111.2.802.1.1.9.1.1.1.4
The number of B-components in this BEB.
OBJECT-TYPE    
  Unsigned32 0..1  

ieee8021PbbNumberOfBebPorts 1.3.111.2.802.1.1.9.1.1.1.5
The number of CNPs, PIPs, CBPs, and PNPs in this BEB.
OBJECT-TYPE    
  Unsigned32  

ieee8021PbbNextAvailablePipIfIndex 1.3.111.2.802.1.1.9.1.1.1.6
This object provides an available ifIndex value that can be used for creation of a PIP.
OBJECT-TYPE    
  InterfaceIndex  

ieee8021PbbVipTable 1.3.111.2.802.1.1.9.1.1.2
This table lists the additional PBB parameters for each VIP. Entries in this table must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbVipEntry

ieee8021PbbVipEntry 1.3.111.2.802.1.1.9.1.1.2.1
Each entry consists of the name string, I-SID, Default Destination MAC, Service Type, and possible B-MAC.
OBJECT-TYPE    
  Ieee8021PbbVipEntry  

ieee8021PbbVipPipIfIndex 1.3.111.2.802.1.1.9.1.1.2.1.1
Identifies the PIP associated with this VIP within the BEB. A value of zero indicates the VIP is not currently associated with any PIP. The value of this object must be persistent across reinitializations of the management system.
OBJECT-TYPE    
  InterfaceIndexOrZero  

ieee8021PbbVipISid 1.3.111.2.802.1.1.9.1.1.2.1.2
The I-SID for this VIP. Within an I-Component, an VIP can only be serviced by one I-SID. And the ISID is a configurable parameter of the VIP. The value of this object must be persistent across reinitializations of the management system.
OBJECT-TYPE    
  IEEE8021PbbServiceIdentifierOrUnassigned  

ieee8021PbbVipDefaultDstBMAC 1.3.111.2.802.1.1.9.1.1.2.1.3
The Default Destination B-MAC for this VIP.
OBJECT-TYPE    
  MacAddress  

ieee8021PbbVipType 1.0.1.3.111.2.802.1.1.9.1.1.2.1.4
This feature is used to support asymmetic VLANs. The value of this object must be persistent across reinitializations of the management system.
OBJECT-TYPE    
  IEEE8021PbbIngressEgress  

ieee8021PbbVipRowStatus 1.3.111.2.802.1.1.9.1.1.2.1.5
This indicates the status of an entry in this table, and is used to create/delete entries. It is an implementation specific decision as to whether any column in this table may be set while the corresponding instance of this object is valid(1). The value of this object must be persistent across reinitializations of the management system.
OBJECT-TYPE    
  RowStatus  

ieee8021PbbVipEnableConnectionId 1.3.111.2.802.1.1.9.1.1.2.1.6
This indicates if the connection_identifier parameter is allowed to learn associations between a backbone MAC address and a customer MAC address. The default value is true, indicating that such learning is allowed. This parameter should be configured to false at the root node of a Point-to-multipoint TE service instance.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbISidToVipTable 1.3.111.2.802.1.1.9.1.1.3
This table contains a cross-reference of I-SID values to the VIPs with which they are associated. This allows VIPs to be located easily by their associated I-SID.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbISidToVipEntry

ieee8021PbbISidToVipEntry 1.3.111.2.802.1.1.9.1.1.3.1
A mapping from an I-SID to the VIP whith which it is associated. An entry will exist for each entry in the ieee8021PbbVipTable.
OBJECT-TYPE    
  Ieee8021PbbISidToVipEntry  

ieee8021PbbISidToVipISid 1.3.111.2.802.1.1.9.1.1.3.1.1
The I-SID of a VIP.
OBJECT-TYPE    
  IEEE8021PbbServiceIdentifier  

ieee8021PbbISidToVipComponentId 1.3.111.2.802.1.1.9.1.1.3.1.2
The component identifier of the VIP to which this I-SID is associated.
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021PbbISidToVipPort 1.3.111.2.802.1.1.9.1.1.3.1.3
The port number of the VIP to which this I-SID is associated.
OBJECT-TYPE    
  IEEE8021BridgePortNumber  

ieee8021PbbPipTable 1.3.111.2.802.1.1.9.1.1.4
This table contains the parameters for each PIP, and can be used to configure the PIP port names. Entries in this table must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbPipEntry

ieee8021PbbPipEntry 1.3.111.2.802.1.1.9.1.1.4.1
The parameters for a PIP.
OBJECT-TYPE    
  Ieee8021PbbPipEntry  

ieee8021PbbPipIfIndex 1.3.111.2.802.1.1.9.1.1.4.1.1
The number identifying the PIP.
OBJECT-TYPE    
  InterfaceIndex  

ieee8021PbbPipBMACAddress 1.3.111.2.802.1.1.9.1.1.4.1.2
The B-MAC used by this PIP for the B-SA.
OBJECT-TYPE    
  MacAddress  

ieee8021PbbPipName 1.3.111.2.802.1.1.9.1.1.4.1.3
A text string of local significance which identifies the PIP within a BEB.
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

ieee8021PbbPipIComponentId 1.3.111.2.802.1.1.9.1.1.4.1.4
Identifies the I-component associated with this PIP.
OBJECT-TYPE    
  IEEE8021PbbComponentIdentifier  

ieee8021PbbPipVipMap 1.3.111.2.802.1.1.9.1.1.4.1.5
This object contains a bitmap indicating all the VIPs in the range 1 through 4094 that are associated with this PIP. The bits correspond to Bridge Port numbers in the range 1 through 4094. The high-order bit of the first octet corresponds to port number 1, and subsequent bits of the octet string correspond to subsequent port numbers. The following formula can be used to find the bit corresponding to a particular port number B: octet[(B-1)/8] & (1 >> ((B-1)%8)) If the bit for a particular port number is 1, that VIP is associated with this PIP. The value of this object may be truncated to remove trailing octets of all zeros.
OBJECT-TYPE    
  STRING Size(0..512)  

ieee8021PbbPipVipMap1 1.3.111.2.802.1.1.9.1.1.4.1.6
This object contains a bitmap indicating all the VIPs in the range 4095 through 20478 that are associated with this PIP. The bits correspond to Bridge Port numbers in the range 4095 through 20478. The high-order bit of the first octet corresponds to port number 1, and subsequent bits of the octet string correspond to subsequent port numbers. The following formula can be used to find the bit corresponding to a particular port number B: octet[(B-4095)/8] & (1 >> ((B-4095)%8)) If the bit for a particular port number is 1, that VIP is associated with this PIP. Note that ports numbers greater than 4094 cannot be used with xSTP. The value of this object may be truncated to remove trailing octets of all zeros.
OBJECT-TYPE    
  STRING Size(0..2048)  

ieee8021PbbPipVipMap2 1.3.111.2.802.1.1.9.1.1.4.1.7
This object contains a bitmap indicating all the VIPs in the range 20479 through 36861 that are associated with this PIP. The bits correspond to Bridge Port numbers in the range 20479 through 36861. The high-order bit of the first octet corresponds to port number 1, and subsequent bits of the octet string correspond to subsequent port numbers. The following formula can be used to find the bit corresponding to a particular port number B: octet[(B-20479)/8] & (1 >> ((B-20479)%8)) If the bit for a particular port number is 1, that VIP is associated with this PIP. Note that ports numbers greater than 4094 cannot be used with xSTP. The value of this object may be truncated to remove trailing octets of all zeros.
OBJECT-TYPE    
  STRING Size(0..2048)  

ieee8021PbbPipVipMap3 1.3.111.2.802.1.1.9.1.1.4.1.8
This object contains a bitmap indicating all the VIPs in the range 36862 through 53245 that are associated with this PIP. The bits correspond to Bridge Port numbers in the range 36862 through 53245. The high-order bit of the first octet corresponds to port number 1, and subsequent bits of the octet string correspond to subsequent port numbers. The following formula can be used to find the bit corresponding to a particular port number B: octet[(B-36862)/8] & (1 >> ((B-36862)%8)) If the bit for a particular port number is 1, that VIP is associated with this PIP. Note that ports numbers greater than 4094 cannot be used with xSTP. The value of this object may be truncated to remove trailing octets of all zeros.
OBJECT-TYPE    
  STRING Size(0..2048)  

ieee8021PbbPipVipMap4 1.3.111.2.802.1.1.9.1.1.4.1.9
This object contains a bitmap indicating all the VIPs in the range 53246 through 65535 that are associated with this PIP. The bits correspond to Bridge Port numbers in the range 53246 through 65535. The high-order bit of the first octet corresponds to port number 1, and subsequent bits of the octet string correspond to subsequent port numbers. The following formula can be used to find the bit corresponding to a particular port number B: octet[(B-53246)/8] & (1 >> ((B-53246)%8)) If the bit for a particular port number is 1, that VIP is associated with this PIP. Note that ports numbers greater than 4094 cannot be used with xSTP. The value of this object may be truncated to remove trailing octets of all zeros.
OBJECT-TYPE    
  STRING Size(0..1537)  

ieee8021PbbPipRowStatus 1.3.111.2.802.1.1.9.1.1.4.1.10
Indicates the status of an entry in this table, and is used to create/delete entries. The object ieee8021PbbPipBMACAddress must be set before this object can be made active(1). The value of ieee8021PbbPipBMACAddress cannot be modified while this object is active(1).
OBJECT-TYPE    
  RowStatus  

ieee8021PbbPipPriorityTable 1.3.111.2.802.1.1.9.1.1.5
A table that contains information about every PIP that is associated with this PBB.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbPipPriorityEntry

ieee8021PbbPipPriorityEntry 1.3.111.2.802.1.1.9.1.1.5.1
A list of Default User Priorities for each PIP of a PBB. This is indexed by ieee8021PbbPipIfIndex.
OBJECT-TYPE    
  Ieee8021PbbPipPriorityEntry  

ieee8021PbbPipPriorityCodePointSelection 1.3.111.2.802.1.1.9.1.1.5.1.1
This object identifies the rows in the PCP encoding and decoding tables that are used to remark frames on this PIP if this remarking is enabled.
OBJECT-TYPE    
  IEEE8021PriorityCodePoint  

ieee8021PbbPipUseDEI 1.3.111.2.802.1.1.9.1.1.5.1.2
If the Use_DEI is set to true(1) for the PIP then the drop_eligible parameter is encoded in the DEI of transmitted frames, and the drop_eligible parameter shall be true(1) for a received frame if the DEI is set in the VLAN tag or the Priority Code Point Decoding Table indicates drop_eligible True for the received PCP value. If the Use_DEI parameter is false(2), the DEI shall be transmitted as zero and ignored on receipt. The default value of the Use_DEI parameter is false(2).
OBJECT-TYPE    
  TruthValue  

ieee8021PbbPipRequireDropEncoding 1.3.111.2.802.1.1.9.1.1.5.1.3
If a Bridge supports encoding or decoding of drop_eligible from the PCP field of a VLAN tag (6.7.3) on any of its PIPs, then it shall implement a Boolean parameter Require Drop Encoding on each of its PIPs with default value false(2). If Require Drop Encoding is True and the PIP cannot encode particular priorities with drop_eligible, then frames queued with those priorities and drop_eligible true(1) shall be discarded and not transmitted.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbPipDecodingTable 1.3.111.2.802.1.1.9.1.1.6
A table that contains information about Priority Code Point Decoding Table for a PIP of a provider Bridge. Alternative values for each table are specified as rows in Table 6-3 (6.9.3), with each alternative labeled by the number of distinct priorities that can be communicated, and the number of these for which drop precedence can be communicated. All writable objects in this table must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbPipDecodingEntry

ieee8021PbbPipDecodingEntry 1.3.111.2.802.1.1.9.1.1.6.1
A list of objects containing Priority Code Point Decoding information for a PIP of a provider Bridge.
OBJECT-TYPE    
  Ieee8021PbbPipDecodingEntry  

ieee8021PbbPipDecodingPriorityCodePointRow 1.3.111.2.802.1.1.9.1.1.6.1.1
The specific row in Table 6-3 (6.9.3) indicating the PCP.
OBJECT-TYPE    
  IEEE8021PriorityCodePoint  

ieee8021PbbPipDecodingPriorityCodePoint 1.3.111.2.802.1.1.9.1.1.6.1.2
The specific PCP value in Table 6-3 (6.9.3).
OBJECT-TYPE    
  Integer32 0..7  

ieee8021PbbPipDecodingPriority 1.3.111.2.802.1.1.9.1.1.6.1.3
The specific priority value in Table 6-3 (6.9.3).
OBJECT-TYPE    
  IEEE8021PriorityValue  

ieee8021PbbPipDecodingDropEligible 1.3.111.2.802.1.1.9.1.1.6.1.4
The drop eligibility value in 12.6.2.8.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbPipEncodingTable 1.3.111.2.802.1.1.9.1.1.7
A table that contains information about Priority Code Point Decoding Table for a PIP of a provider Bridge. Alternative values for each table are specified as rows in Table 6-3 (6.9.3), with each alternative labeled by the number of distinct priorities that can be communicated, and the number of these for which drop precedence can be communicated. All writable objects in this table must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbPipEncodingEntry

ieee8021PbbPipEncodingEntry 1.3.111.2.802.1.1.9.1.1.7.1
A list of objects containing Priority Code Point Encoding information for a PIP of a provider Bridge.
OBJECT-TYPE    
  Ieee8021PbbPipEncodingEntry  

ieee8021PbbPipEncodingPriorityCodePointRow 1.3.111.2.802.1.1.9.1.1.7.1.1
The specific row in Table 6-3 (6.9.3)indicating the PCP row. (i.e. 8P0D, 7P1D, 6P2D, 5P3D)
OBJECT-TYPE    
  IEEE8021PriorityCodePoint  

ieee8021PbbPipEncodingPriorityCodePoint 1.3.111.2.802.1.1.9.1.1.7.1.2
The specific row in Table 6-3 (6.9.3) indicating the PCP. (i.e., 0,1,2,3,4,5,6,7).
OBJECT-TYPE    
  Integer32 0..7  

ieee8021PbbPipEncodingDropEligible 1.3.111.2.802.1.1.9.1.1.7.1.3
The specific row in Table 6-3 (6.9.3) indicating the drop eligibility. A value of true(1) means eligible for drop.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbPipEncodingPriority 1.3.111.2.802.1.1.9.1.1.7.1.4
The encoding priority in Table 6-3 (6.9.3).
OBJECT-TYPE    
  IEEE8021PriorityValue  

ieee8021PbbVipToPipMappingTable 1.3.111.2.802.1.1.9.1.1.8
This table lists VIPs and the PIP to which each is associated, and allows the PIP associated with each VIP to be configured. Entries in this table must be persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbVipToPipMappingEntry

ieee8021PbbVipToPipMappingEntry 1.3.111.2.802.1.1.9.1.1.8.1
The PIP is identified by the value of the ieee8021PbbVipToPipNumber. This value may be used to index the ieee8021PbbPipTable to set or retrieve the PIP's configuration information
OBJECT-TYPE    
  Ieee8021PbbVipToPipMappingEntry  

ieee8021PbbVipToPipMappingPipIfIndex 1.3.111.2.802.1.1.9.1.1.8.1.1
The PIP's interface number.
OBJECT-TYPE    
  InterfaceIndex  

ieee8021PbbVipToPipMappingStorageType 1.3.111.2.802.1.1.9.1.1.8.1.2
Indicates the storage type of this entry. An entry whose storage type is permanent(4) need not allow write access to other columns in that entry.
OBJECT-TYPE    
  StorageType  

ieee8021PbbVipToPipMappingRowStatus 1.3.111.2.802.1.1.9.1.1.8.1.3
Indicates the status of an entry in this table, and is used to create/delete entries. The corresponding instance of ieee8021PbbVipToPipMappingPipIfIndex must be set before this object can be made active(1). The corresponding instance of ieee8021PbbVipToPipMappingPipIfIndex may not be changed while this object is active(1).
OBJECT-TYPE    
  RowStatus  

ieee8021PbbCBPServiceMappingTable 1.3.111.2.802.1.1.9.1.1.9
The CBP table of I-SID values (6.11). The contents of this table are not persistent over power up restart/reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbCBPServiceMappingEntry

ieee8021PbbCBPServiceMappingEntry 1.3.111.2.802.1.1.9.1.1.9.1
Each entry includes the B-VID to carry and optionally an I-SID for mapping I-SIDs normally used at a Peer E-NNI (6.11, 26.6.2). The table is indexed by the component ID of the relevant B-Component of the PBB, the Bridge port number of the CBP on that Bcomponent, and the I-SID for the service.
OBJECT-TYPE    
  Ieee8021PbbCBPServiceMappingEntry  

ieee8021PbbCBPServiceMappingBackboneSid 1.3.111.2.802.1.1.9.1.1.9.1.1
The I-SID which will be transmitted over the PBBN.
OBJECT-TYPE    
  IEEE8021PbbServiceIdentifier  

ieee8021PbbCBPServiceMappingBVid 1.3.111.2.802.1.1.9.1.1.9.1.2
The B-VID which will carry this service instance.
OBJECT-TYPE    
  VlanId  

ieee8021PbbCBPServiceMappingDefaultBackboneDest 1.3.111.2.802.1.1.9.1.1.9.1.3
A default destination B-MAC for the CBP to use.
OBJECT-TYPE    
  MacAddress  

ieee8021PbbCBPServiceMappingType 1.3.111.2.802.1.1.9.1.1.9.1.4
Used for Pt-MPt service where ingress or egress limiting is desired.
OBJECT-TYPE    
  IEEE8021PbbIngressEgress  

ieee8021PbbCBPServiceMappingLocalSid 1.3.111.2.802.1.1.9.1.1.9.1.5
The I-SID value used in frames transmitted and received through this CustomerBackbonePort.
OBJECT-TYPE    
  IEEE8021PbbServiceIdentifierOrUnassigned  

ieee8021PbbCBPServiceMappingRowStatus 1.3.111.2.802.1.1.9.1.1.9.1.6
Indicates the status of an entry in this table, and is used to create/delete entries. The corresponding instances of the following objects must be set before this object can be made active(1): ieee8021PbbCBPServiceMappingBVid ieee8021PbbCBPServiceMappingDefaultBackboneDest ieee8021PbbCBPServiceMappingType The corresponding instances of the following objects may not be changed while this object is active(1): ieee8021PbbCBPServiceMappingBVid ieee8021PbbCBPServiceMappingDefaultBackboneDest ieee8021PbbCBPServiceMappingType ieee8021PbbCBPServiceMappingLocalSid
OBJECT-TYPE    
  RowStatus  

ieee8021PbbCbpTable 1.3.111.2.802.1.1.9.1.1.10
This table is used to dynamically create/delete Customer Backbone Ports in a PBB. Entries in this table must be persistent across reinitializations of the management system.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021PbbCbpEntry

ieee8021PbbCbpEntry 1.3.111.2.802.1.1.9.1.1.10.1
An entry representing a dynamically created CBP in a PBB.
OBJECT-TYPE    
  Ieee8021PbbCbpEntry  

ieee8021PbbCbpRowStatus 1.3.111.2.802.1.1.9.1.1.10.1.1
This object is used for creation/deletion of entries in this table.
OBJECT-TYPE    
  RowStatus  

ieee8021PbbGroups 1.3.111.2.802.1.1.9.2.1
OBJECT IDENTIFIER    

ieee8021PbbCompliances 1.3.111.2.802.1.1.9.2.2
OBJECT IDENTIFIER    

ieee8021PbbBackboneEdgeBridgeGroup 1.3.111.2.802.1.1.9.2.1.1
The collection of objects used to represent a Backbone Edge Bridge.
OBJECT-GROUP    

ieee8021PbbVipGroup 1.3.111.2.802.1.1.9.2.1.2
The collection of objects used to represent a Virtual Instance Port (VIP).
OBJECT-GROUP    

ieee8021PbbPipGroup 1.3.111.2.802.1.1.9.2.1.3
The collection of objects used to represent a Provider Instance Port (PIP).
OBJECT-GROUP    

ieee8021PbbDefaultPriorityGroup 1.3.111.2.802.1.1.9.2.1.4
A collection of objects defining the priority applicable to each port for media that do not support native priority.
OBJECT-GROUP    

ieee8021PbbPipDecodingGroup 1.3.111.2.802.1.1.9.2.1.5
A collection of objects providing statistics counters for decoding priority and drop eligibility for Bridge Ports.
OBJECT-GROUP    

ieee8021PbbPipEncodingGroup 1.3.111.2.802.1.1.9.2.1.6
A collection of objects providing statistics counters for encoding priority and drop eligibility for Bridge Ports.
OBJECT-GROUP    

ieee8021PbbVipToPipMappingGroup 1.3.111.2.802.1.1.9.2.1.7
The collection of objects used to represent the mapping of a VIP to a PIP.
OBJECT-GROUP    

ieee8021PbbCBPServiceMappingGroup 1.3.111.2.802.1.1.9.2.1.8
The collection of objects used to represent a service instance.
OBJECT-GROUP    

ieee8021PbbDynamicCbpGroup 1.3.111.2.802.1.1.9.2.1.9
The collection of objects used to dynamically create/delete CBPs in a PBB.
OBJECT-GROUP    

ieee8021PbbVipPbbTeGroup 1.3.111.2.802.1.1.9.2.1.10
The collection of objects specific to PBB Bridges operating in a PBB-TE aware manner.
OBJECT-GROUP    

ieee8021PbbCompliance 1.3.111.2.802.1.1.9.2.2.1
Read-only and read-write access for this object are optional.
MODULE-COMPLIANCE    

ieee8021PbbWithPbbTeCompliance 1.3.111.2.802.1.1.9.2.2.2
Read-only and read-write access for this object are optional.
MODULE-COMPLIANCE