IEEE8021-MIRP-MIB

File: IEEE8021-MIRP-MIB.mib (11726 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMPv2-MIB Q-BRIDGE-MIB IEEE8021-TC-MIB
IEEE8021-PBB-MIB IEEE8021-BRIDGE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE TruthValue
MODULE-COMPLIANCE OBJECT-GROUP systemGroup
VlanIdOrNone IEEE8021BridgePortNumberOrZero ieee8021PbbBackboneEdgeBridgeObjects
ieee8021BridgeBasePortEntry

Defined Types

Ieee8021MirpV2PortEntry  
SEQUENCE    
  ieee8021MirpV2PortEnabledStatus TruthValue

Defined Values

ieee8021MirpMib 1.3.111.2.802.1.1.23
Multiple I-SID Registration Protocol module for managing IEEE 802.1Qbe Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
MODULE-IDENTITY    

ieee8021MirpV2MIBObjects 1.3.111.2.802.1.1.23.1
OBJECT IDENTIFIER    

ieee8021MirpV2Conformance 1.3.111.2.802.1.1.23.2
OBJECT IDENTIFIER    

ieee8021MirpV2PortTable 1.3.111.2.802.1.1.23.1.1
A table that contains controls for the Multiple I-SID Registration Protocol (MIRP) state machines for all of the Ports of a Bridge.
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021MirpV2PortEntry

ieee8021MirpV2PortEntry 1.3.111.2.802.1.1.23.1.1.1
Each entry contains the MIRP Participant controls for one Port.
OBJECT-TYPE    
  Ieee8021MirpV2PortEntry  

ieee8021MirpV2PortEnabledStatus 1.3.111.2.802.1.1.23.1.1.1.1
The state of MIRP operation on this port. The value true(1) indicates that MIRP is enabled on this port, as long as ieee8021PbbMirpEnableStatus is also enabled for this component. When false(2) but ieee8021PbbMirpEnableStatus is still enabled for the device, MIRP is disabled on this port. If MIRP is enabled on a VIP, then the MIRP Participant is enabled on that VIP's PIP. If MIRP is enabled on none of the VIPs on a PIP, then the MIRP Participant on the PIP is diabled; any MIRP packets received will be silently discarded, and no MIRP registrations will be propagated from the PIP. A transition from all VIPs on a PIP false(2) to at least one VIP on the PIP true(1) will cause a reset of all MIRP state machines on this PIP. If MIRP is enabled on any port not a VIP, then the MIRP Participant is enabled on that port. If MIRP is disabled on a non-VIP port, then MIRP packets received will be silently discarded, and no MIRP registrations will be propagated from the port. A transition from false(2) to true(1) will cause a reset of all MIRP state machines on a non-VIP port. The value of this object MUST be retained across reinitializations of the management system.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbMirpEnableStatus 1.3.111.2.802.1.1.9.1.1.1.7
The administrative status requested by management for MIRP. The value true(1) indicates that MIRP should be enabled on this component, on all ports for which it has not been specifically disabled. When false(2), MIRP is disabled on all ports. This object affects all MIRP Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MIRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbMirpBvid 1.3.111.2.802.1.1.9.1.1.1.8
The B-VID to which received MIRPDUs are to be assigned, or 0, if they are to be sent on the CBP PVID.
OBJECT-TYPE    
  VlanIdOrNone  

ieee8021PbbMirpDestSelector 1.3.111.2.802.1.1.9.1.1.1.9
An enumerated value specifying what destination_address and vlan_identifier are to be used when the MIRP Participant transmits an MIRPDU towards the MAC relay entity: cbpMirpGroup (1) Use the Nearest Customer Bridge group address from Table 8-1 with the MIRP BVID. cbpMirpVlan (2) Use the Nearest Customer Bridge group address from Table 8-1 with the Backbone VLAN Identifier field from the Backbone Service Instance table. cbpMirpTable (3) Use the Default Backbone Destination and Backbone VLAN Identifier fields from the Backbone Service Instance table. The value of this object MUST be retained across reinitializations of the management system.
OBJECT-TYPE    
  INTEGER cbpMirpGroup(1), cbpMirpVlan(2), cbpMirpTable(3)  

ieee8021PbbMirpPnpEnable 1.3.111.2.802.1.1.9.1.1.1.10
A Boolean value specifying the administrative status requested by management for attaching a MIRP Participant to a PNP if and only if this system is a Backbone Edge Bridge (BEB): true(1) The BEB is to attach a MIRP Participant to exactly one Port, either a management Port with no LAN connection external to the BEB, or a PNP. false(2) No MIRP Participant is to be present on any PNP (or on the MAC Relay-facing side of a CBP). The value of this object MUST be retained across reinitializations of the management system.
OBJECT-TYPE    
  TruthValue  

ieee8021PbbMirpPnpPortNumber 1.3.111.2.802.1.1.9.1.1.1.11
The Bridge Port Number of the Provider Network Port (PNP) that has an associated MIRP Participant, or 0, if no Bridge Port has an associated MIRP Participant. This object indexes an entry in the Bridge Port Table. The system SHALL ensure that either ieee8021PbbMirpPnpPortNumber contains 0, or that the indexed ieee8021BridgeBasePortType object contains the value providerNetworkPort(3).
OBJECT-TYPE    
  IEEE8021BridgePortNumberOrZero  

ieee8021MirpV2Compliances 1.3.111.2.802.1.1.23.2.1
OBJECT IDENTIFIER    

ieee8021MirpV2Groups 1.3.111.2.802.1.1.23.2.2
OBJECT IDENTIFIER    

ieee8021MirpV2ReqdGroup 1.3.111.2.802.1.1.23.2.2.1
Objects in the MIRP augmentation required group.
OBJECT-GROUP    

ieee8021MirpV2BridgeCompliance 1.3.111.2.802.1.1.23.2.1.1
The compliance statement for support by a Bridge of the IEEE8021-MIRP-MIB module.
MODULE-COMPLIANCE