IDS0-MIB

File: IDS0-MIB.mib (14449 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises experimental IpAddress
TimeTicks Gauge Counter
DisplayString OBJECT-TYPE

Defined Types

Ids0CfgEntry  
SEQUENCE    
  ids0CfgDs1Index INTEGER
  ids0CfgDs0Index INTEGER
  ids0CfgDs0Id DisplayString
  ids0CfgBlockCallType INTEGER
  ids0CfgDs0AssignedSlot INTEGER
  ids0CfgDs0AssignedChannel INTEGER
  ids0CfgDs0SrvcState INTEGER
  ids0CfgNailUpDs0 INTEGER

Ids0StatEntry  
SEQUENCE    
  ids0StatDs1Index INTEGER
  ids0StatDs0Index INTEGER
  ids0StatDs0 INTEGER
  ids0StatDevConnTo INTEGER
  ids0StatSlotConnTo INTEGER
  ids0StatChanConnTo INTEGER
  ids0StatDs0SrvcState INTEGER
  ids0StatCallArrivalTime INTEGER
  ids0StatCallConnectTime INTEGER
  ids0StatCallTerminateTime INTEGER
  ids0StatCallType INTEGER
  ids0StatCallBlockState INTEGER
  ids0StatCallDirn INTEGER

Ids0CmdEntry  
SEQUENCE    
  ids0CmdDs1Index INTEGER
  ids0CmdDs0Index INTEGER
  ids0CmdMgtStationId STRING
  ids0CmdReqId INTEGER
  ids0CmdFunction INTEGER
  ids0CmdForce INTEGER
  ids0CmdParam STRING
  ids0CmdResult INTEGER
  ids0CmdCode INTEGER

Ids0BulkAccessEntry  
SEQUENCE    
  ids0BulkAccessDs1Index INTEGER
  ids0BulkAccessStatDs0Mdm STRING

Defined Values

usr 1.3.6.1.4.1.429
OBJECT IDENTIFIER    

nas 1.3.6.1.4.1.429.1
OBJECT IDENTIFIER    

ids0 1.3.6.1.4.1.429.1.16
OBJECT IDENTIFIER    

ids0CfgTable 1.3.6.1.4.1.429.1.16.1
A table of operator definable parameters for each DS0
OBJECT-TYPE    
  SEQUENCE OF  
    Ids0CfgEntry

ids0CfgEntry 1.3.6.1.4.1.429.1.16.1.1
There is one DS0 Configure entry for each DS0 timeslot in the chassis
OBJECT-TYPE    
  Ids0CfgEntry  

ids0CfgDs1Index 1.3.6.1.4.1.429.1.16.1.1.1
The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CfgDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

ids0CfgDs0Index 1.3.6.1.4.1.429.1.16.1.1.2
The index value which uniquely identifies the timeslot of the CSU to which this entry refers.
OBJECT-TYPE    
  INTEGER  

ids0CfgDs0Id 1.3.6.1.4.1.429.1.16.1.1.3
An operator definable string useful for easy identification of a DS0 relative to the user application.
OBJECT-TYPE    
  DisplayString Size(0..40)  

ids0CfgBlockCallType 1.3.6.1.4.1.429.1.16.1.1.4
An oject that defines the type of calls to be blocked by the specified DS0. A value of blockAll(5) results in all calls to this DS0 being blocked. Default = blockNone(2).
OBJECT-TYPE    
  INTEGER notSupported(1), blockNone(2), blockAnalog(3), blockDigital(4), blockAll(5)  

ids0CfgDs0AssignedSlot 1.3.6.1.4.1.429.1.16.1.1.5
Defines which slot (1 thru 16) the specified DS0 is restricted to connect with. A value of 17 indicates that this DS0 is not restricted. If a value of 0 is returned, it it indicatesthat this NAC does not support the definition of this object. Default = 17.
OBJECT-TYPE    
  INTEGER 0..17  

ids0CfgDs0AssignedChannel 1.3.6.1.4.1.429.1.16.1.1.6
Defines which channel of a modem the specified DS0 is restricted to connect with. A value of 33 indicates that this DS0 is not restricted. If a value of 0 is returned, it it indicatesthat this NAC does not support the definition of this object. Default = 33.
OBJECT-TYPE    
  INTEGER 0..33  

ids0CfgDs0SrvcState 1.3.6.1.4.1.429.1.16.1.1.7
Defines the service state of a specified DS0. This object does not apply to Rob Bit T1 operation. Default = inService(2).
OBJECT-TYPE    
  INTEGER notSupported(1), inService(2), localOutOfService(3)  

ids0CfgNailUpDs0 1.3.6.1.4.1.429.1.16.1.1.8
This will put a DS0 in either a normal or a Transparent mode. Normal Mode : This is a normal ds0. Transparent Mode : This provides clear ds0 channels to pass data between the T1-PRI NAC and modems.
OBJECT-TYPE    
  INTEGER normal(1), transparent(2)  

ids0StatTable 1.3.6.1.4.1.429.1.16.2
USR's DS0 Status table contains various timeslot status information.
OBJECT-TYPE    
  SEQUENCE OF  
    Ids0StatEntry

ids0StatEntry 1.3.6.1.4.1.429.1.16.2.1
There is one entry in the DS0 Status table for each timeslot in the chassis.
OBJECT-TYPE    
  Ids0StatEntry  

ids0StatDs1Index 1.3.6.1.4.1.429.1.16.2.1.1
The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0StatDs1Index matches the value of the index for the coresponding DS1 entity in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

ids0StatDs0Index 1.3.6.1.4.1.429.1.16.2.1.2
The index value which uniquely identifies the timeslot of the CSU to which this entry refers. The value of ds0StatDs0Index matches the value of the index for the corresponding DS0 entity in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

ids0StatDs0 1.3.6.1.4.1.429.1.16.2.1.3
This object indicates the current status of the specified timeslot. The status values change dynamically with system operation.
OBJECT-TYPE    
  INTEGER other(1), idle(2), dialingIn(3), dialingOut(4), connectedIn(5), connectedOut(6), ds0CallDisc(22), ds0IsDchan(23), ds0OutOfServ(24), ds0InMaint(25), ds0IsFchan(26), ds0LclOutOfService(27)  

ids0StatDevConnTo 1.3.6.1.4.1.429.1.16.2.1.4
This object indicates the device currently connected.
OBJECT-TYPE    
  INTEGER none(1), isdnGateway(2), quadModem(3), quadIModem(4)  

ids0StatSlotConnTo 1.3.6.1.4.1.429.1.16.2.1.5
This object indicates the slot of the device currently connected. Range = 0(none)-16.
OBJECT-TYPE    
  INTEGER 0..16  

ids0StatChanConnTo 1.3.6.1.4.1.429.1.16.2.1.6
This object indicates the channel of the device currently connected. Default 255.
OBJECT-TYPE    
  INTEGER 0..255  

ids0StatDs0SrvcState 1.3.6.1.4.1.429.1.16.2.1.7
This is the current service state of a DS0. This object does not apply to Rob Bit T1 operation.
OBJECT-TYPE    
  INTEGER notSupported(1), inService(2), localOutOfService(3), maintenance(4), remoteOutOfService(5)  

ids0StatCallArrivalTime 1.3.6.1.4.1.429.1.16.2.1.8
This object indicates the call arrival time in GMT w/1 sec resolution.
OBJECT-TYPE    
  INTEGER  

ids0StatCallConnectTime 1.3.6.1.4.1.429.1.16.2.1.9
This object indicates the call connect time in GMT w/1 sec resolution.
OBJECT-TYPE    
  INTEGER  

ids0StatCallTerminateTime 1.3.6.1.4.1.429.1.16.2.1.10
This object indicates the call terminate time in GMT w/1 sec resolution.
OBJECT-TYPE    
  INTEGER  

ids0StatCallType 1.3.6.1.4.1.429.1.16.2.1.11
This object indicates the call type (analog or digital).
OBJECT-TYPE    
  INTEGER analog(1), digital(2)  

ids0StatCallBlockState 1.3.6.1.4.1.429.1.16.2.1.12
This object indicates current ids0 call block status.
OBJECT-TYPE    
  INTEGER notSupported(1), blockNone(2), blockAnalog(3), blockDigital(4), blockAll(5)  

ids0StatCallDirn 1.3.6.1.4.1.429.1.16.2.1.13
This object indicates the call dirn (in or out bound).
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

ids0CmdTable 1.3.6.1.4.1.429.1.16.3
The DS0 Command table contains an entry for each of the manageable timeslots in the chassis. It provides a means through which to take specific actions on one or more timeslots in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    Ids0CmdEntry

ids0CmdEntry 1.3.6.1.4.1.429.1.16.3.1
There is one entry in the DS0 Command table per timeslot in the chassis.
OBJECT-TYPE    
  Ids0CmdEntry  

ids0CmdDs1Index 1.3.6.1.4.1.429.1.16.3.1.1
The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0CmdDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

ids0CmdDs0Index 1.3.6.1.4.1.429.1.16.3.1.2
The index which uniquely identifies the timeslot of the specified CSU to which this entry is applicable.
OBJECT-TYPE    
  INTEGER  

ids0CmdMgtStationId 1.3.6.1.4.1.429.1.16.3.1.3
This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with ds0CmdReqId and ds0CmdResult to detect interference from other MSs.
OBJECT-TYPE    
  STRING Size(0..8)  

ids0CmdReqId 1.3.6.1.4.1.429.1.16.3.1.4
This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command on this DS0 entity. If the request-id is unknown or undefined, this object contains the zero value.
OBJECT-TYPE    
  INTEGER  

ids0CmdFunction 1.3.6.1.4.1.429.1.16.3.1.5
This object contains a value that identifies the command being requested.
OBJECT-TYPE    
  INTEGER noCommand(1), disconnect(2), inService(3), localOutofService(4), blockAnalogCalls(5), blockDigitalCalls(6), blockAllCalls(7), blockNoCalls(8)  

ids0CmdForce 1.3.6.1.4.1.429.1.16.3.1.6
In some cases, the DS0 entity may be in a state such that certain commands could adversely affect connections. In such cases, a command request with ds0CmdForce not defined, or set to noForce will result in a warning. If the operator elects to ignore such warnings, ds0CmdForce can be set to force in a re-issued request and the command will be carried out regardless of its potentially hazzardous effects.
OBJECT-TYPE    
  INTEGER force(1), noForce(2)  

ids0CmdParam 1.3.6.1.4.1.429.1.16.3.1.7
This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required.
OBJECT-TYPE    
  STRING Size(0..24)  

ids0CmdResult 1.3.6.1.4.1.429.1.16.3.1.8
This object contains the result of the most recently requested command, or the value none(1) if no commands have been requested since the last reset.
OBJECT-TYPE    
  INTEGER none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)  

ids0CmdCode 1.3.6.1.4.1.429.1.16.3.1.9
The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful.
OBJECT-TYPE    
  INTEGER noError(1), unable(2), unrecognizedCommand(6), slotEmpty(8), noResponse(12), unsupportedCommand(20), deviceDisabled(22), pendingSoftwareDownload(73)  

ids0BulkAccessTable 1.3.6.1.4.1.429.1.16.4
A table of parameters for each DS0 accessed in a bulk format
OBJECT-TYPE    
  SEQUENCE OF  
    Ids0BulkAccessEntry

ids0BulkAccessEntry 1.3.6.1.4.1.429.1.16.4.1
There is one bulk DS0 access for each DS1 in the chassis
OBJECT-TYPE    
  Ids0BulkAccessEntry  

ids0BulkAccessDs1Index 1.3.6.1.4.1.429.1.16.4.1.1
The index value which uniquely identifies the CSU to which this entry is applicable. The value of ds0BulkAccessDs1Index matches the value of the index for the corresponding DS1 entity in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

ids0BulkAccessStatDs0Mdm 1.3.6.1.4.1.429.1.16.4.1.2
This object contains all of the ids0Stat table parameters for all the DS0's on the DS1
OBJECT-TYPE    
  STRING Size(0..255)