IDKT-F2-MIB
File:
IDKT-F2-MIB.mib (11179 bytes)
Imported modules
Imported symbols
Defined Types
| F2FWDMacAddressEntry |
|
| SEQUENCE |
|
|
|
| |
f2FWDMacAddress |
OCTET STRING |
|
Defined Values
| f2MIB |
1.3.6.1.4.1.27304.15 |
| DKT 797xx series MIB. |
| MODULE-IDENTITY |
|
|
|
| f2IGMPSnooping |
1.3.6.1.4.1.27304.15.1.1 |
| Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2MTU |
1.3.6.1.4.1.27304.15.1.2 |
| Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes) |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..8960 |
|
| f2FWDTable |
1.3.6.1.4.1.27304.15.1.3 |
| Get learned MAC addresses from LAN side of switch engine |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
F2FWDMacAddressEntry |
|
| f2FWDMacAddressEntry |
1.3.6.1.4.1.27304.15.1.3.1 |
| Learned MAC address from LAN side of switch engine |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
F2FWDMacAddressEntry |
|
|
| f2Ports |
1.3.6.1.4.1.27304.15.2 |
| OBJECT IDENTIFIER |
|
|
|
| f2CPUPort |
1.3.6.1.4.1.27304.15.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| f2CPUPortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.1.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..10 |
|
| f2CPUPortSpeedMode |
1.3.6.1.4.1.27304.15.2.1.2 |
| Displays the speed and duplex mode on the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2CPUPortLinkStatus |
1.3.6.1.4.1.27304.15.2.1.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2CPUPortFlowControl |
1.3.6.1.4.1.27304.15.2.1.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2CPUPortEnable |
1.3.6.1.4.1.27304.15.2.1.5 |
| Status for CPU port. Always 1 for enabled. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2WANPort |
1.3.6.1.4.1.27304.15.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| f2WANPortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.2.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..10 |
|
| f2WANPortSpeedMode |
1.3.6.1.4.1.27304.15.2.2.2 |
| Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2WANPortLinkStatus |
1.3.6.1.4.1.27304.15.2.2.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2WANPortFlowControl |
1.3.6.1.4.1.27304.15.2.2.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2WANPortEnable |
1.3.6.1.4.1.27304.15.2.2.5 |
| Status for WAN port. Always 1 for enabled. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN1Port |
1.3.6.1.4.1.27304.15.2.3 |
| OBJECT IDENTIFIER |
|
|
|
| f2LAN1PortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.3.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN1PortSpeedMode |
1.3.6.1.4.1.27304.15.2.3.2 |
| Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2LAN1PortLinkStatus |
1.3.6.1.4.1.27304.15.2.3.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN1PortFlowControl |
1.3.6.1.4.1.27304.15.2.3.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN1PortEnable |
1.3.6.1.4.1.27304.15.2.3.5 |
| Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN2Port |
1.3.6.1.4.1.27304.15.2.4 |
| OBJECT IDENTIFIER |
|
|
|
| f2LAN2PortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.4.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN2PortSpeedMode |
1.3.6.1.4.1.27304.15.2.4.2 |
| Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2LAN2PortLinkStatus |
1.3.6.1.4.1.27304.15.2.4.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN2PortFlowControl |
1.3.6.1.4.1.27304.15.2.4.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN2PortEnable |
1.3.6.1.4.1.27304.15.2.4.5 |
| Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN3Port |
1.3.6.1.4.1.27304.15.2.5 |
| OBJECT IDENTIFIER |
|
|
|
| f2LAN3PortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.5.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN3PortSpeedMode |
1.3.6.1.4.1.27304.15.2.5.2 |
| Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2LAN3PortLinkStatus |
1.3.6.1.4.1.27304.15.2.5.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN3PortFlowControl |
1.3.6.1.4.1.27304.15.2.5.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN3PortEnable |
1.3.6.1.4.1.27304.15.2.5.5 |
| Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN4Port |
1.3.6.1.4.1.27304.15.2.6 |
| OBJECT IDENTIFIER |
|
|
|
| f2LAN4PortAutoNegotiation |
1.3.6.1.4.1.27304.15.2.6.1 |
| Displays auto negotiation state for the port. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN4PortSpeedMode |
1.3.6.1.4.1.27304.15.2.6.2 |
| Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..10) |
|
| f2LAN4PortLinkStatus |
1.3.6.1.4.1.27304.15.2.6.3 |
| Displays the Link status for the port |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN4PortFlowControl |
1.3.6.1.4.1.27304.15.2.6.4 |
| Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2LAN4PortEnable |
1.3.6.1.4.1.27304.15.2.6.5 |
| Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..1 |
|
| f2ModuleGroup |
1.3.6.1.4.1.27304.15.3 |
| The objects are related to the DKT 797xx series module, MIB rev 09. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|