IBM-TS3500-MIBv2

File: IBM-TS3500-MIBv2.mib (143004 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
enterprises Integer32 DisplayString
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP

Defined Values

ibm3584 1.3.6.1.4.1.2.6.182
Added Host Message to most of Audit traps and fix trap 450 to indicate the corect message
MODULE-IDENTITY    

ibm 1.3.6.1.4.1.2
OBJECT IDENTIFIER    

ibmProd 1.3.6.1.4.1.2.6
OBJECT IDENTIFIER    

ibm3584MIB 1.3.6.1.4.1.2.6.182.1
OBJECT IDENTIFIER    

ibm3584MIBTraps 1.3.6.1.4.1.2.6.182.1.0
OBJECT IDENTIFIER    

ibm3584MIBAdmin 1.3.6.1.4.1.2.6.182.1.1
OBJECT IDENTIFIER    

ibm3584MIBObjects 1.3.6.1.4.1.2.6.182.1.2
OBJECT IDENTIFIER    

ibm3584MIBConformance 1.3.6.1.4.1.2.6.182.1.3
OBJECT IDENTIFIER    

ibm3584MIBGroupMTMNLSN 1.3.6.1.4.1.2.6.182.1.2.11
OBJECT IDENTIFIER    

ibm3584MIBGroupSKASCASCQ 1.3.6.1.4.1.2.6.182.1.2.21
OBJECT IDENTIFIER    

ibm3584MIBGroupHECHECQ 1.3.6.1.4.1.2.6.182.1.2.31
OBJECT IDENTIFIER    

ibm3584MIBGroupTA 1.3.6.1.4.1.2.6.182.1.2.41
OBJECT IDENTIFIER    

ibm3584MIBGroupURC 1.3.6.1.4.1.2.6.182.1.2.51
OBJECT IDENTIFIER    

ibm3584MIBGroupFFFD 1.3.6.1.4.1.2.6.182.1.2.61
OBJECT IDENTIFIER    

ibm3584MIBGroupTD 1.3.6.1.4.1.2.6.182.1.2.71
OBJECT IDENTIFIER    

ibm3584MIBGroupFSC 1.3.6.1.4.1.2.6.182.1.2.81
OBJECT IDENTIFIER    

ibm3584MIBGroupSCD 1.3.6.1.4.1.2.6.182.1.2.91
OBJECT IDENTIFIER    

ibm3584MIBGroupVOLSER 1.3.6.1.4.1.2.6.182.1.2.101
OBJECT IDENTIFIER    

ibm3584MIBGroupLL 1.3.6.1.4.1.2.6.182.1.2.111
OBJECT IDENTIFIER    

ibm3584MIBGroupWWNN 1.3.6.1.4.1.2.6.182.1.2.121
OBJECT IDENTIFIER    

ibm3584MIBGroupEA 1.3.6.1.4.1.2.6.182.1.2.131
OBJECT IDENTIFIER    

ibm3584MIBGroupDrvSN 1.3.6.1.4.1.2.6.182.1.2.141
OBJECT IDENTIFIER    

ibm3584MIBSeverity 1.3.6.1.4.1.2.6.182.1.2.151
OBJECT IDENTIFIER    

ibm3584MIBUserID 1.3.6.1.4.1.2.6.182.1.2.171
OBJECT IDENTIFIER    

ibm3584MIBObjectsMTMNLSN 1.3.6.1.4.1.2.6.182.1.2.11.1
This is the machine type associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..16)  

ibm3584MIBObjectsSKASCASCQ 1.3.6.1.4.1.2.6.182.1.2.21.1
This is the sense key associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..8)  

ibm3584MIBObjectsHECHECQ 1.3.6.1.4.1.2.6.182.1.2.31.1
This is the hardware error code associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..5)  

ibm3584MIBObjectsTA 1.3.6.1.4.1.2.6.182.1.2.41.1
This is the TapeAlert flag number associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..2)  

ibm3584MIBObjectsURC 1.3.6.1.4.1.2.6.182.1.2.51.1
This is the URC associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..4)  

ibm3584MIBObjectsFFFD 1.3.6.1.4.1.2.6.182.1.2.61.1
This is the failing frame associated with the trap.
OBJECT-TYPE    
  DisplayString Size(1..5)  

ibm3584MIBObjectsTD 1.3.6.1.4.1.2.6.182.1.2.71.1
This is the text description of the trap.
OBJECT-TYPE    
  DisplayString Size(1..255)  

ibm3584MIBObjectsFSC 1.3.6.1.4.1.2.6.182.1.2.81.1
This is the drive Fault Symptom Code.
OBJECT-TYPE    
  DisplayString Size(1..4)  

ibm3584MIBObjectsSCD 1.3.6.1.4.1.2.6.182.1.2.91.1
This is the Single Character Display on the drive.
OBJECT-TYPE    
  DisplayString Size(1)  

ibm3584MIBObjectsVOLSER 1.3.6.1.4.1.2.6.182.1.2.101.1
This is the Volume Serial number on the cartridge.
OBJECT-TYPE    
  DisplayString Size(1..8)  

ibm3584MIBObjectsLL 1.3.6.1.4.1.2.6.182.1.2.111.1
This is the Logical Library that is having a problem within the physical library.
OBJECT-TYPE    
  DisplayString Size(1..16)  

ibm3584MIBObjectsWWNN 1.3.6.1.4.1.2.6.182.1.2.121.1
The World Wide Node Name of the Drive that is having problems.
OBJECT-TYPE    
  DisplayString Size(1..8)  

ibm3584MIBObjectsEA 1.3.6.1.4.1.2.6.182.1.2.131.1
The Element Address of the Drive that is having problems.
OBJECT-TYPE    
  Integer32  

ibm3584MIBObjectsDrvSN 1.3.6.1.4.1.2.6.182.1.2.141.1
The Serial Number of the Drive that is having problems.
OBJECT-TYPE    
  DisplayString Size(1..12)  

ibm3584MIBObjectsSeverity 1.3.6.1.4.1.2.6.182.1.2.151.1
Indicates the percieved severity of the problem
OBJECT-TYPE    
  INTEGER informational(1), warning(2), critical(3), unknown(4), configuration(5), security(6), authentication(7)  

ibm3584MIBObjectsUserID 1.3.6.1.4.1.2.6.182.1.2.171.1
This is the User ID associated with a request via external UI.
OBJECT-TYPE    
  DisplayString Size(1..20)  

ibm3584Trap001 1.3.6.1.4.1.2.6.182.1.0.1
Trap for library TapeAlert 001. Flag: Library hardware A Type: C Cause: The changer mechanism is having trouble communicating with the internal drive. Required host message: The library is having difficulty communicating with the drive. 1. Restart the operation. 2. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap002 1.3.6.1.4.1.2.6.182.1.0.2
Trap for library TapeAlert 002. Flag: Library hardware B. Type: W Cause: The changer mechanism has a hardware fault. Required host message: The library has a hardware failure. 1. Restart the operation. 2. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap003 1.3.6.1.4.1.2.6.182.1.0.3
Trap for library TapeAlert 003. Flag: Library hardware C. Type: C Cause: The changer mechanism has a hardware fault that requires a reset to recover. Required host message: The library has a hardware fault: 1. Reset the library. 2. Restart the operation. Check the library users manual for device specific instructions on resetting the device.
NOTIFICATION-TYPE    

ibm3584Trap004 1.3.6.1.4.1.2.6.182.1.0.4
Trap for library TapeAlert 004. Flag: Library hardware D. Type: C Cause: The changer mechanism has a hardware fault that is not mechanically related, or that requires a power cycle to recover. Required host message: The library has a hardware fault that is not mechanically related. 1. Restart the operation. 2. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap005 1.3.6.1.4.1.2.6.182.1.0.5
Trap for library TapeAlert 005. Flag: Library diagnostics required. Type: W Cause: The changer mechanism has a hardware fault which would be identified by extended diagnostics (eg SCSI Send Diagnostic). Required host message: The library mechanism may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the library users manual for device specific instructions on running extended diagnostic tests.
NOTIFICATION-TYPE    

ibm3584Trap006 1.3.6.1.4.1.2.6.182.1.0.6
Trap for library TapeAlert 006. Flag: Library interface. Type: C Cause: The library has identified an interfacing fault. Required host message: The library has a problem with the host interface: 1. Check the cables and cable connections. 2. Restart the operation.
NOTIFICATION-TYPE    

ibm3584Trap007 1.3.6.1.4.1.2.6.182.1.0.7
Trap for library TapeAlert 007. Flag: Predictive failure. Type: W Cause: Predictive failure of library hardware. Required host message: A hardware failure of the library is predicted. Call the library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap008 1.3.6.1.4.1.2.6.182.1.0.8
Trap for library TapeAlert 008. Flag: Library maintenance. Type: W Cause: Library preventive maintenance required. Required host message: Preventative maintenance of the library is required. Check the library users manual for device specific preventative maintenance tasks, or call your library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap009 1.3.6.1.4.1.2.6.182.1.0.9
Trap for library TapeAlert 009. Flag: Library humidity limits. Type: C Cause: Library humidity limits exceeded. Required host message: General environmental conditions inside the library are outside the specified humidity range.
NOTIFICATION-TYPE    

ibm3584Trap010 1.3.6.1.4.1.2.6.182.1.0.10
Trap for library TapeAlert 010. Flag: Library temperature limits. Type: C Cause: Library temperature limits exceeded. Required host message: General environmental conditions inside the library have exceeded the specified temperature range.
NOTIFICATION-TYPE    

ibm3584Trap011 1.3.6.1.4.1.2.6.182.1.0.11
Trap for library TapeAlert 011. Flag: Library voltage limits. Type: C Cause: Library voltage limits exceeded. Required host message: A potential failure of a power supply exists. Call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap012 1.3.6.1.4.1.2.6.182.1.0.12
Trap for library TapeAlert 012. Flag: Library stray tape. Type: C Cause: Stray cartridge left in library drive after previous error recovery. Required host message: A cartridge has been left in a drive inside the library by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not clear, turn the library off and then on again. 3. If the problem persists, call the library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap013 1.3.6.1.4.1.2.6.182.1.0.13
Trap for library TapeAlert 013. Flag: Library pick retry. Type: W Cause: Operation to pick a cartridge from a slot had to perform an excessive number of retries before succeeding. Required host message: There is a potential problem with a drive ejecting cartridges short or with the library mechanism picking a cartridge from a slot. 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap014 1.3.6.1.4.1.2.6.182.1.0.14
Trap for library TapeAlert 014. Flag: Library place retry. Type: W Cause: Operation to place a cartridge into a slot had to perform an excessive number of retries before succeeding. Required host message: There is a potential problem with the library mechanism placing a cartridge into a slot: 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap015 1.3.6.1.4.1.2.6.182.1.0.15
Trap for library TapeAlert 015. Flag: Library load retry. Type: W Cause: Operation to load a cartridge into a drive had to perform an excessive number of retries before succeeding. Required host message: There is a potential problem with the library mechanism placing a cartridge into a slot: 1. No action needs to be taken at this time. 2. If the problem persists, call the library supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap016 1.3.6.1.4.1.2.6.182.1.0.16
Trap for library TapeAlert 016. Flag: Library door. Type: C Cause: Changer door open prevents library functioning. Required host message: A library door is open and prevents the library from functioning. 1. Clear any obstructions from the library door. 2. Close the library door.
NOTIFICATION-TYPE    

ibm3584Trap017 1.3.6.1.4.1.2.6.182.1.0.17
Trap for library TapeAlert 017. Flag: Library mail slot. Type: C Cause: Mechanical problem with import/export mail slot. Required host message: A problem with an I/O station exists. 1. Ensure that there is no obstruction in the I/O station. 2. Restart the operation. 3. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap018 1.3.6.1.4.1.2.6.182.1.0.18
Trap for library TapeAlert 018. Flag: Library magazine. Type: C Cause: Library magazine not present. Required host message: The library cannot operate without the magazine. 1. Insert the magazine into the library. 2. Restart the operation.
NOTIFICATION-TYPE    

ibm3584Trap019 1.3.6.1.4.1.2.6.182.1.0.19
Trap for library TapeAlert 019. Flag: Library security mode. Type: W Cause: Library door opened then closed during operation. Required host message: Library security has been compromised.
NOTIFICATION-TYPE    

ibm3584Trap020 1.3.6.1.4.1.2.6.182.1.0.20
Trap for library TapeAlert 020. Flag: Library security mode. Type: I Cause: Library security mode has changed. Required host message: The security mode of the library has been changed. Either the library has been put into secure mode or the library has exited secure mode. This is for informational purposes only. No action is required.
NOTIFICATION-TYPE    

ibm3584Trap021 1.3.6.1.4.1.2.6.182.1.0.21
Trap for library TapeAlert 021. Flag: Library offline. Type: I Cause: Library manually turned offline. Required host message: The library has been manually turned offline and is unavailable for use.
NOTIFICATION-TYPE    

ibm3584Trap022 1.3.6.1.4.1.2.6.182.1.0.22
Trap for library TapeAlert 022. Flag: Library drive offline. Type: I Cause: Library turned internal drive offline. Required host message: A drive inside the library has been taken offline. This is for informational purposes only. No action is required.
NOTIFICATION-TYPE    

ibm3584Trap023 1.3.6.1.4.1.2.6.182.1.0.23
Trap for library TapeAlert 023. Flag: Library scan retry. Type: W Cause: Operation to scan the barcode on a cartridge had to perform an excessive number of retries before succeeding. Required host message: There is a potential problem with the barcode label or the scanner hardware in the library mechanism. 1. Check for damaged, misaligned, or peeling barcode labels on cartridges. 2. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap024 1.3.6.1.4.1.2.6.182.1.0.24
Trap for library TapeAlert 024. Flag: Library inventory. Type: C Cause: Inconsistent media inventory. Required host message: Library has detected an inconsistency in its inventory. 1. Run a library inventory to correct the inconsistency. 2. Restart operation. 3. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap025 1.3.6.1.4.1.2.6.182.1.0.25
Trap for library TapeAlert 025. Flag: Library illegal operation. Type: W Cause: Illegal operation detected. Required host message: The library detected an illegal operation. If the problem persists, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap026 1.3.6.1.4.1.2.6.182.1.0.26
Trap for library TapeAlert 026. Flag: Dual-port interface error. Type: W Cause: Failure of one interface port in a dual-port configuration, eg Fibre channel Required host message: A redundant interface port on the library has failed.
NOTIFICATION-TYPE    

ibm3584Trap027 1.3.6.1.4.1.2.6.182.1.0.27
Trap for library TapeAlert 027. Flag: Cooling fan failure. Type: W Cause: One or more fans inside the library have failed. Internal flag state only cleared when all fans are working again. Required host message: A library cooling fan has failed.
NOTIFICATION-TYPE    

ibm3584Trap028 1.3.6.1.4.1.2.6.182.1.0.28
Trap for library TapeAlert 028. Flag: Power supply. Type: W Cause: Redundant PSU failure inside the library subsystem. Required host message: A redundant power supply has failed inside the library. Call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap029 1.3.6.1.4.1.2.6.182.1.0.29
Trap for library TapeAlert 029. Flag: Power consumption. Type: W Cause: Power consumption of one or more devices inside the library is outside specified range. Required host message: The library power consumption is outside the specified range.
NOTIFICATION-TYPE    

ibm3584Trap030 1.3.6.1.4.1.2.6.182.1.0.30
Trap for library TapeAlert 030. Flag: Pass-through mechanism failure. Type: C Cause: Error occurred in pass-through mechanism during self test or while attempting to transfer a cartridge between library modules. Required host message: A failure has occurred in the cartridge pass-through mechanism between two library modules.
NOTIFICATION-TYPE    

ibm3584Trap031 1.3.6.1.4.1.2.6.182.1.0.31
Trap for library TapeAlert 031. Flag: Cartridge in pass-through mechanism. Type: C Cause: Cartridge left in the pass-through mechanism between two library modules. Required host message: A cartridge has been left in the library pass-through mechanism from a previous hardware fault. Check the library users guide for instructions on clearing this fault.
NOTIFICATION-TYPE    

ibm3584Trap032 1.3.6.1.4.1.2.6.182.1.0.32
Trap for library TapeAlert 032. Flag: Unreadable bar code labels. Type: I Cause: Unable to read a bar code label on a cartridge during library inventory/scan. Required host message: During an inventory or scan, the library was unable to read a bar code label on a cartridge. 1. Check for damaged, misaligned, or peeling barcode labels on the cartridge. 2. If no problem is found, call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap201 1.3.6.1.4.1.2.6.182.1.0.201
Trap for drive TapeAlert 001. Flag: Read warning. Type: W Cause: The drive is having severe trouble reading. Required host message: The tape drive is having problems reading data. No data has been lost, but there has been a reduction in the performance of the tape.
NOTIFICATION-TYPE    

ibm3584Trap202 1.3.6.1.4.1.2.6.182.1.0.202
Trap for drive TapeAlert 002. Flag: Write warning. Type: W Cause: The drive is having severe trouble writing. Required host message: The tape drive is having problems writing data. No data has been lost, but there has been a reduction in the performance of the tape.
NOTIFICATION-TYPE    

ibm3584Trap203 1.3.6.1.4.1.2.6.182.1.0.203
Trap for drive TapeAlert 003. Flag: Hard error. Type: W Cause: The drive had a hard read or write error. Required host message: The operation has stopped because an error has occurred while reading or writing data which the drive cannot correct.
NOTIFICATION-TYPE    

ibm3584Trap204 1.3.6.1.4.1.2.6.182.1.0.204
Trap for drive TapeAlert 004. Flag: Media. Type: C Cause: Media can no longer be written/read, or performance is severely degraded. Required host message: Unrecoverable read, write, or positioning error that is due to a faulty tape cartridge. Replace the tape cartridge.
NOTIFICATION-TYPE    

ibm3584Trap205 1.3.6.1.4.1.2.6.182.1.0.205
Trap for drive TapeAlert 005. Flag: Read failure. Type: C Cause: The drive can no longer read data from the tape. Required host message: The tape is damaged or the drive is faulty. Call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap206 1.3.6.1.4.1.2.6.182.1.0.206
Trap for drive TapeAlert 006. Flag: Write failure. Type: C Cause: The drive can no longer write data to the tape. Required host message: The tape is from a faulty batch or the tape drive is faulty. 1. Use a good tape to test the drive. 2. If the problem persists, call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap207 1.3.6.1.4.1.2.6.182.1.0.207
Trap for drive TapeAlert 007. Flag: Media life. Type: W Cause: The media has exceeded its specified life. Required host message: The tape cartridge has reached the end of its calculated useful life: 1. Copy any data you need to another tape. 2. Discard the old tape.
NOTIFICATION-TYPE    

ibm3584Trap208 1.3.6.1.4.1.2.6.182.1.0.208
Trap for drive TapeAlert 008. Flag: Not data grade. Type: W Cause: The drive has not been able to read the MRS stripes. Required host message: The cartridge is not data-grade. Any data that you write to the tape is at risk. Replace the tape with a data-grade tape.
NOTIFICATION-TYPE    

ibm3584Trap209 1.3.6.1.4.1.2.6.182.1.0.209
Trap for drive TapeAlert 009. Flag: Write protect. Type: C Cause: Write command is attempted to a write protected tape. Required host message: You are trying to write to a write-protected cartridge. Remove the write-protection or use another tape.
NOTIFICATION-TYPE    

ibm3584Trap210 1.3.6.1.4.1.2.6.182.1.0.210
Trap for drive TapeAlert 010. Flag: No removal. Type: I Cause: Manual or s/w unload attempted when prevent media removal on. Required host message: The tape drive received an UNLOAD command after the server prevented the tape cartridge from being removed. Refer to the documentation for your server's operating system.
NOTIFICATION-TYPE    

ibm3584Trap211 1.3.6.1.4.1.2.6.182.1.0.211
Trap for drive TapeAlert 011. Flag: Cleaning media. Type: I Cause: Cleaning tape loaded into drive. Required host message: The tape in the drive is a cleaning cartridge.
NOTIFICATION-TYPE    

ibm3584Trap212 1.3.6.1.4.1.2.6.182.1.0.212
Trap for drive TapeAlert 012. Flag: Unsupported format. Type: I Cause: Attempted load of unsupported tape format, eg DDS2 in DDS1 drive. Required host message: You have tried to load a cartridge of a type which is not supported by the drive.
NOTIFICATION-TYPE    

ibm3584Trap213 1.3.6.1.4.1.2.6.182.1.0.213
Trap for drive TapeAlert 013. Flag: Recoverable snapped tape. Type: C Cause: Tape snapped/cut in the drive where media can be ejected. Required host message: The tape has split apart. Do not attempt to extract the old tape cartridge. Call your IBM Service Representative.
NOTIFICATION-TYPE    

ibm3584Trap214 1.3.6.1.4.1.2.6.182.1.0.214
Trap for drive TapeAlert 014. Flag: Unrecoverable snapped tape. Type: C Cause: Tape snapped/cut in the drive where media cannot be ejected. Required host message: The operation has failed because the tape in the drive has snapped: 1. Do not attempt to extract the tape cartridge. 2. Call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap215 1.3.6.1.4.1.2.6.182.1.0.215
Trap for drive TapeAlert 015. Flag: Memory chip in cartridge failure. Type: W Cause: Memory chip failed in cartridge. Required host message: The memory in the tape cartridge has failed, which reduces performance. Replace the tape cartridge. If this error occurs on multiple cartridges, see Error Code 6 located in the list of drive error codes in the 3584 Maintenance Information Guide.
NOTIFICATION-TYPE    

ibm3584Trap216 1.3.6.1.4.1.2.6.182.1.0.216
Trap for drive TapeAlert 016. Flag: Forced eject. Type: C Cause: Manual or forced eject while drive actively writing or reading. Required host message: The operation has failed because the tape cartridge was manually ejected while the tape drive was actively writing or reading.
NOTIFICATION-TYPE    

ibm3584Trap217 1.3.6.1.4.1.2.6.182.1.0.217
Trap for drive TapeAlert 017. Flag: Read only format. Type: W Cause: Media loaded that is read-only format. Required host message: You have loaded a cartridge of a type that is read-only in this drive. The cartridge will appear as write-protected.
NOTIFICATION-TYPE    

ibm3584Trap218 1.3.6.1.4.1.2.6.182.1.0.218
Trap for drive TapeAlert 018. Flag: Tape directory corrupted on load. Type: W Cause: Tape drive powered down with tape loaded, or permanent error prevented the tape directory being updated. Required host message: The drive detected that the tape directory in the cartridge memory has been corrupted. Re-read all data from the tape to rebuild the tape directory.
NOTIFICATION-TYPE    

ibm3584Trap219 1.3.6.1.4.1.2.6.182.1.0.219
Trap for drive TapeAlert 019. Flag: Nearing media life. Type: I Cause: Media may have exceeded its specified number of passes. Required host message: The tape cartridge is nearing the end of its calculated life. It is recommended that you: 1. Use another cartridge for your next backup. 2. Store this cartridge in a safe place in case you need to restore data from it.
NOTIFICATION-TYPE    

ibm3584Trap220 1.3.6.1.4.1.2.6.182.1.0.220
Trap for drive TapeAlert 020. Flag: Clean now. Type: C Cause: The drive thinks it has a head clog, or needs cleaning. Required host message: The tape drive needs cleaning: 1. If the operation has stopped, eject the tape and clean the drive. 2. If the operation has not stopped, wait for it to finish and then clean the drive. Check the tape drive users manual for device specific cleaning instructions.
NOTIFICATION-TYPE    

ibm3584Trap221 1.3.6.1.4.1.2.6.182.1.0.221
Trap for drive TapeAlert 021. Flag: Clean periodic. Type: W Cause: The drive is ready for a periodic clean Required host message: The tape drive is due for routine cleaning: 1. Wait for the current operation to finish. 2. Then use a cleaning cartridge. Check the tape drive users manual for device specific cleaning instructions.
NOTIFICATION-TYPE    

ibm3584Trap222 1.3.6.1.4.1.2.6.182.1.0.222
Trap for drive TapeAlert 022. Flag: Expired cleaning media. Type: C Cause: The cleaning tape has expired. Required host message: The last cleaning cartridge used in the tape drive has worn out: 1. Discard the worn out cleaning cartridge. 2. Wait for the current operation to finish. 3. Then use a new cleaning cartridge.
NOTIFICATION-TYPE    

ibm3584Trap223 1.3.6.1.4.1.2.6.182.1.0.223
Trap for drive TapeAlert 023. Flag: Invalid cleaning tape. Type: C Cause: Invalid cleaning tape type used. Required host message: The last cleaning cartridge used in the tape drive was an invalid type: 1. Do not use this cleaning cartridge in this drive. 2. Wait for the current operation to finish. 3. Then use a valid cleaning cartridge.
NOTIFICATION-TYPE    

ibm3584Trap224 1.3.6.1.4.1.2.6.182.1.0.224
Trap for drive TapeAlert 024. Flag: Retention requested. Type: W Cause: The drive is having severe trouble reading or writing, which will be resolved by a retention cycle. Required host message: The tape drive has requested a retention operation.
NOTIFICATION-TYPE    

ibm3584Trap225 1.3.6.1.4.1.2.6.182.1.0.225
Trap for drive TapeAlert 025. Flag: Dual-port interface error. Type: W Cause: Failure of one interface port in a dual-port configuration, eg Fibrechannel. Required host message: A redundant interface port on the tape drive has failed.
NOTIFICATION-TYPE    

ibm3584Trap226 1.3.6.1.4.1.2.6.182.1.0.226
Trap for drive TapeAlert 026. Flag: Cooling fan failure. Type: W Cause: Fan failure inside tape drive mechanism or tape drive enclosure. Required host message: A tape drive cooling fan has failed.
NOTIFICATION-TYPE    

ibm3584Trap227 1.3.6.1.4.1.2.6.182.1.0.227
Trap for drive TapeAlert 027. Flag: Power supply. Type: W Cause: Redundant PSU failure inside the tape drive enclosure or rack subsystem. Required host message: A redundant power supply has failed inside the tape drive enclosure. Check the enclosure users manual for instructions on replacing the failed power supply.
NOTIFICATION-TYPE    

ibm3584Trap228 1.3.6.1.4.1.2.6.182.1.0.228
Trap for drive TapeAlert 028. Flag: Power consumption. Type: W Cause: Power consumption of the tape drive is outside specified range. Required host message: The tape drive power consumption is outside the specified range.
NOTIFICATION-TYPE    

ibm3584Trap229 1.3.6.1.4.1.2.6.182.1.0.229
Trap for drive TapeAlert 029. Flag: Drive maintenance. Type: W Cause: The drive requires preventative maintenance (not cleaning). Required host message: Preventative maintenance of the tape drive is required. Check the tape drive users manual for device specific preventative maintenance tasks or call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap230 1.3.6.1.4.1.2.6.182.1.0.230
Trap for drive TapeAlert 030. Flag: Hardware A. Type: C Cause: The drive has a hardware fault that requires reset to recover. Required host message: A hardware failure has occurred that requires a tape drive reset to recover. If resetting the drive does not recover the error note the single-character display and see the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap231 1.3.6.1.4.1.2.6.182.1.0.231
Trap for drive TapeAlert 031. Flag: Hardware B. Type: C Cause: The drive has a hardware fault which is not read/write related or requires a power cycle to recover. Required host message: The tape drive failed it's internal Power-On Self Test. Note the single-character display and see the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap232 1.3.6.1.4.1.2.6.182.1.0.232
Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the SCSI, Fibre or RS-422 interface. See Error Code 8 or 9 located in the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap233 1.3.6.1.4.1.2.6.182.1.0.233
Trap for drive TapeAlert 033. Flag: Eject media. Type: C Cause: Error recovery action. Required host message: A failure has occurred that requires you to unload the cartridge from the drive. Unload the tape cartridge, the reinsert it and restart the operation.
NOTIFICATION-TYPE    

ibm3584Trap234 1.3.6.1.4.1.2.6.182.1.0.234
Trap for drive TapeAlert 034. Flag: Download failed. Type: W Cause: Firmware download failed. Required host message: The firmware download has failed because you have tried to use the incorrect firmware for this tape drive. Obtain the correct firmware and try again.
NOTIFICATION-TYPE    

ibm3584Trap235 1.3.6.1.4.1.2.6.182.1.0.235
Trap for drive TapeAlert 035. Flag: Drive humidity. Type: W Cause: Drive humidity limits exceeded. Required host message: Environmental conditions inside the tape drive are outside the specified humidity range.
NOTIFICATION-TYPE    

ibm3584Trap236 1.3.6.1.4.1.2.6.182.1.0.236
Trap for drive TapeAlert 036. Flag: Drive temperature. Type: W Cause: Drive temperature limits exceeded. Required host message: The drive detected the temperature is exceeding the recommended temperature of the library. See Error Code 1 in the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap237 1.3.6.1.4.1.2.6.182.1.0.237
Trap for drive TapeAlert 037. Flag: Drive voltage. Type: W Cause: Drive voltage limits exceeded. Required host message: The drive detected externally supplied voltages are approaching or outside the specified voltage limits. See Error Code 2 in the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap238 1.3.6.1.4.1.2.6.182.1.0.238
Trap for drive TapeAlert 038. Flag: Predictive failure. Type: C Cause: Predictive failure of drive hardware. Required host message: A hardware failure of the tape drive is predicted. Call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap239 1.3.6.1.4.1.2.6.182.1.0.239
Trap for drive TapeAlert 039. Flag: Diagnostics required. Type: W Cause: The drive may have had a failure which may be identified by stored diagnostic information or by running extended diagnostics (eg SCSI Send Diagnostic). Required host message: The drive detected a failure that requires diagnostics for isolation. See Error Code 6 located in the list of drive error codes in the 3584 Maintenance Information.
NOTIFICATION-TYPE    

ibm3584Trap240 1.3.6.1.4.1.2.6.182.1.0.240
Trap for drive TapeAlert 040. Flag: Loader hardware A. Type: C Cause: Loader mechanism is having trouble communicating with the tape drive. Required host message: The changer mechanism is having difficulty communicating with the tape drive: 1. Turn the autoloader off then on. 2. Restart the operation. 3. If problem persists, call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap241 1.3.6.1.4.1.2.6.182.1.0.241
Trap for drive TapeAlert 041. Flag: Loader stray tape. Type: C Cause: Stray tape left in loader after previous error recovery. Required host message: A tape has been left in the autoloader by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not clear, turn the autoloader off then on again. 3. If the problem persists, call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap242 1.3.6.1.4.1.2.6.182.1.0.242
Trap for drive TapeAlert 042. Flag: Loader hardware B. Type: W Cause: Loader mechanism has a hardware fault. Required host message: There is a problem with the autoloader mechanism.
NOTIFICATION-TYPE    

ibm3584Trap243 1.3.6.1.4.1.2.6.182.1.0.243
Trap for drive TapeAlert 043. Flag: Loader door. Type: C Cause: Tape changer door open. Required host message: The operation failed because the autoloader door is open: 1. Clear any obstructions from the autoloader door. 2. Eject the magazine and then insert it again. 3. If the fault does not clear, turn the autoloader off then on again. 4. If the problem persists, call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap244 1.3.6.1.4.1.2.6.182.1.0.244
Trap for drive TapeAlert 044. Flag: Loader hardware C. Type: C Cause: The loader mechanism has a hardware fault that is not mechanically related. Required host message: The autoloader has a hardware fault: 1. Turn the autoloader off then on again. 2. Restart the operation. 3. If the problem persists, call the tape drive supplier helpline. Check the autoloader users manual for device specific instructions on turning the device on and off.
NOTIFICATION-TYPE    

ibm3584Trap245 1.3.6.1.4.1.2.6.182.1.0.245
Trap for drive TapeAlert 045. Flag: Loader magazine. Type: C Cause: Loader magazine not present. Required host message: The autoloader cannot operate without the magazine. 1. Insert the magazine into the autoloader. 2. Restart the operation.
NOTIFICATION-TYPE    

ibm3584Trap246 1.3.6.1.4.1.2.6.182.1.0.246
Trap for drive TapeAlert 046. Flag: Loader predictive failure. Type: W Cause: Predictive failure of loader mechanism hardware. Required host message: A hardware failure of the changer mechanism is predicted. Call the tape drive supplier helpline.
NOTIFICATION-TYPE    

ibm3584Trap250 1.3.6.1.4.1.2.6.182.1.0.250
Trap for drive TapeAlert 050. Flag: Lost statistics. Type: W Cause: Drive or library powered down with tape loaded. Required host message: Media statistics have been lost at some time in the past.
NOTIFICATION-TYPE    

ibm3584Trap251 1.3.6.1.4.1.2.6.182.1.0.251
Trap for drive TapeAlert 051. Flag: Tape directory invalid at unload. Type: W Cause: Error prevented the tape directory being updated on unload. Required host message: The tape directory on the tape cartridge that was previously unloaded is corrupted. The file-search performance is degraded. Use your backup software to rebuild the tape directory by reading all the data.
NOTIFICATION-TYPE    

ibm3584Trap252 1.3.6.1.4.1.2.6.182.1.0.252
Trap for drive TapeAlert 052. Flag: Tape system area write failure. Type: C Cause: Write errors while writing the system log on unload. Required host message: The tape cartridge that was previously unloaded could not write it's system area successfully. Copy the data to another tape cartridge, then discard the old cartridge.
NOTIFICATION-TYPE    

ibm3584Trap253 1.3.6.1.4.1.2.6.182.1.0.253
Trap for drive TapeAlert 053. Flag: Tape system area read failure. Type: C Cause: Read errors while reading the system area on load. Required host message: The tape system area could not be read successfully at load time. Copy the data to another tape cartridge, then discard the old cartridge.
NOTIFICATION-TYPE    

ibm3584Trap254 1.3.6.1.4.1.2.6.182.1.0.254
Trap for LTO drive TapeAlert 054. Flag: No start of data. Type: C Cause: Tape damaged, bulk erased, or incorrect format. Required host message: The start of data could not be found on the tape: 1. Check you are using the correct format tape. 2. Discard the tape or return the tape to your supplier.
NOTIFICATION-TYPE    

ibm3584Trap255 1.3.6.1.4.1.2.6.182.1.0.255
Trap for drive TapeAlert 055. Flag: No start of data. Type: C Cause: Loading failure Required host message: The operation has failed because the media cannot be loaded and threaded. 1. Remove the cartridge, inspect it as specified in the product manual, and retry the operation. 2. If the problem persists, call the tape drive supplier help line.
NOTIFICATION-TYPE    

ibm3584Trap256 1.3.6.1.4.1.2.6.182.1.0.256
Trap for drive TapeAlert 056. Flag: Unrecoverable unload failure. Type: C The operation has failed because the medium cannot be unloaded: 1. Do not attempt to extract the tape cartridge. 2. Call the tape driver supplier help line.
NOTIFICATION-TYPE    

ibm3584Trap257 1.3.6.1.4.1.2.6.182.1.0.257
Trap for drive TapeAlert 057. Flag: Automation interface failure. Type: C The tape drive has a problem with the automation interface: 1. Check the power to the automation system. 2. Check the cables and cable connections. 3. Call the supplier help line if problem persists.
NOTIFICATION-TYPE    

ibm3584Trap258 1.3.6.1.4.1.2.6.182.1.0.258
Trap for drive TapeAlert 058. Flag: Firmware failure. Type: W The tape drive has reset itself due to a detected firmware fault. If problem persists, call the supplier help line.
NOTIFICATION-TYPE    

ibm3584Trap259 1.3.6.1.4.1.2.6.182.1.0.259
Trap for drive TapeAlert 059. Flag: WORM Medium - Integrity Check Failed Type: W The tape drive has detected an inconsistency during the WORM medium integrity checks. Someone may have tampered with the cartridge.
NOTIFICATION-TYPE    

ibm3584Trap260 1.3.6.1.4.1.2.6.182.1.0.260
Trap for drive TapeAlert 060. Flag: WORM Medium - Overwrite Attempted Type: W An attempt had been made to overwrite user data on a WORM medium: 1. If a WORM medium was used inadvertently, replace it with a normal data medium. 2. If a WORM medium was used intentionally: a) check that the software application is compatible with the WORM medium format you are using. b) check that the medium is bar-coded correctly for WORM.
NOTIFICATION-TYPE    

ibm3584Trap401 1.3.6.1.4.1.2.6.182.1.0.401
Trap for non TapeAlert 001. Cause: I/O station full. Required host message: The Import/Export station is full.
NOTIFICATION-TYPE    

ibm3584Trap402 1.3.6.1.4.1.2.6.182.1.0.402
Trap for non TapeAlert 002. Cause: All cartridge slots in the associated logical library are occupied. Required host message: The logical library is full.
NOTIFICATION-TYPE    

ibm3584Trap403 1.3.6.1.4.1.2.6.182.1.0.403
Trap for non TapeAlert 003. Cause: Library out of LTO cleaning cartridges. Required host message: The library is out of LTO cleaning cartridges.
NOTIFICATION-TYPE    

ibm3584Trap404 1.3.6.1.4.1.2.6.182.1.0.404
Trap for non TapeAlert 004. Cause: Library out of DLT cleaning cartridges. Required host message: The library is out of DLT cleaning cartridges.
NOTIFICATION-TYPE    

ibm3584Trap405 1.3.6.1.4.1.2.6.182.1.0.405
Trap for non TapeAlert 005. Cause: I/O station door has been open for five minutes. Required host message: The Import/Export station has been open for five minutes.
NOTIFICATION-TYPE    

ibm3584Trap406 1.3.6.1.4.1.2.6.182.1.0.406
Trap for non TapeAlert 006. Cause: LTO cleaning cartridge expired. Required host message: An LTO cleaning cartridge has expired.
NOTIFICATION-TYPE    

ibm3584Trap407 1.3.6.1.4.1.2.6.182.1.0.407
Trap for non TapeAlert 007. Cause: DLT cleaning cartridge expired. Required host message: A DLT cleaning cartridge has expired.
NOTIFICATION-TYPE    

ibm3584Trap408 1.3.6.1.4.1.2.6.182.1.0.408
Trap for non TapeAlert 008. Cause: Test initiated from operator panel. Required host message: This is a test SNMP trap.
NOTIFICATION-TYPE    

ibm3584Trap409 1.3.6.1.4.1.2.6.182.1.0.409
Trap for non TapeAlert 009. Cause: Library out of 3592 Enterprise Tape cleaning cartridges. Required host message: The library is out of Enterprise Tape cleaning cartridges.
NOTIFICATION-TYPE    

ibm3584Trap410 1.3.6.1.4.1.2.6.182.1.0.410
Trap for non TapeAlert 010. Cause: 3593 Enterprise Tape cleaning cartridge expired. Required host message: A Enterprise Tape cleaning cartridge has expired.
NOTIFICATION-TYPE    

ibm3584Trap411 1.3.6.1.4.1.2.6.182.1.0.411
Trap for non TapeAlert 011. Cause: LTO slots in the library are approaching full capacity. Required host message: LTO slots are approaching full capacity. The library may not be able to import all cartridge in the IO station.
NOTIFICATION-TYPE    

ibm3584Trap412 1.3.6.1.4.1.2.6.182.1.0.412
Trap for non TapeAlert 012. Cause: 3592 Enterprise Tape slots in the library are approaching full capacity. Required host message: 3592 Enterprise Tape slots are approaching full capacity. The library may not be able to import all cartridge in the IO station.
NOTIFICATION-TYPE    

ibm3584Trap413 1.3.6.1.4.1.2.6.182.1.0.413
Trap for non TapeAlert 013. Cause: A host attempted a move to/from a shared drive that was in use by a different host on a different logaical library. Required host message: A Host attempted motion to/from a shared drive. The command failed because the shared drive was being used by another logical library.
NOTIFICATION-TYPE    

ibm3584Trap414 1.3.6.1.4.1.2.6.182.1.0.414
Trap for non TapeAlert 014. Cause: The library had a problem reading the cartridge with the barcode indicated. The cartridge label may be scratched or smeared. Required host message: The library had a problem reading the barcode of a cartridge. Please inspect the label for scratches or smears.
NOTIFICATION-TYPE    

ibm3584Trap415 1.3.6.1.4.1.2.6.182.1.0.415
Trap for non TapeAlert 015. Cause: The library attempted to call home, but was unsuccessful. Required host message: The library attempted to call home, but was unsuccessful.
NOTIFICATION-TYPE    

ibm3584Trap416 1.3.6.1.4.1.2.6.182.1.0.416
Trap for non TapeAlert 016. Cause: The associated logical library is nearing full capacity. Required host message: The logical library is almost full.
NOTIFICATION-TYPE    

ibm3584Trap417 1.3.6.1.4.1.2.6.182.1.0.417
Trap for non TapeAlert 017. Cause: All 3592 Enterprise Tape slots in the library are allocated to a cartridge. Required host message: All physical 3592 Enterprise Tape slots are allocated. No more 3592 Enterprise Tape cartridges may be added at this time.
NOTIFICATION-TYPE    

ibm3584Trap418 1.3.6.1.4.1.2.6.182.1.0.418
Trap for non TapeAlert 018. Cause: All LTO Tape slots in the library are allocated to a cartridge. Required host message: All physical LTO Tape slots are allocated. No more LTO Tape cartridges may be added at this time.
NOTIFICATION-TYPE    

ibm3584Trap419 1.3.6.1.4.1.2.6.182.1.0.419
Trap for non TapeAlert 019. Cause: Unable to reach associated EKM. Required host message: Library is unable to communicate with the associated EKM address.
NOTIFICATION-TYPE    

ibm3584Trap420 1.3.6.1.4.1.2.6.182.1.0.420
Trap for non TapeAlert 020. Cause: A cartridge that can not be encrypted has is loaded in a drives that is used to encrypt all cartridges. Required host message: A cartridge that can not be encrypted has been loaded into a drive that is setup for encryption.
NOTIFICATION-TYPE    

ibm3584Trap421 1.3.6.1.4.1.2.6.182.1.0.421
Trap for non TapeAlert 021. Cause: A new unassigned cartridge is in the library. Required host message: A new cartridge is in the library and is currently unassigned.
NOTIFICATION-TYPE    

ibm3584Trap422 1.3.6.1.4.1.2.6.182.1.0.422
Trap for non TapeAlert 022. Cause: All library doors are closed. The library will inventory and resume operations. Required host message: All library doors have been closed. The library will now inventory and resume operations.
NOTIFICATION-TYPE    

ibm3584Trap440 1.3.6.1.4.1.2.6.182.1.0.440
Trap for non TapeAlert 040. Cause: A user has successfully logged in to the web or operator panel. Required host message: A user has successfully logged into the Web Specialist or Operator Panel.
NOTIFICATION-TYPE    

ibm3584Trap441 1.3.6.1.4.1.2.6.182.1.0.441
Trap for non TapeAlert 041. Cause: A user has attempted to log in to the web or operator panel and was unsuccessful. Required host message: A user has attempted to log in to the Web Specialist or Operator Panel and was unsuccessful after 3 attempts.
NOTIFICATION-TYPE    

ibm3584Trap442 1.3.6.1.4.1.2.6.182.1.0.442
Trap for non TapeAlert 042. Cause: A user has logged out of the web or operator panel. Required host message: A user has logged out of the Web Specialist or Operator Panel.
NOTIFICATION-TYPE    

ibm3584Trap443 1.3.6.1.4.1.2.6.182.1.0.443
Trap for non TapeAlert 043. Cause: A library configuration setting has been changed. Required host message: A library configuration setting has been changed via the Op Panel or Web Specialist.
NOTIFICATION-TYPE    

ibm3584Trap444 1.3.6.1.4.1.2.6.182.1.0.444
Trap for non TapeAlert 044. Cause: A logical library configuration setting has been changed. Required host message: A logical library configuration setting has been changed.
NOTIFICATION-TYPE    

ibm3584Trap445 1.3.6.1.4.1.2.6.182.1.0.445
Trap for non TapeAlert 045. Cause: A tape drive configuration setting has been changed. Required host message: A tape drive configuration setting has been changed.
NOTIFICATION-TYPE    

ibm3584Trap446 1.3.6.1.4.1.2.6.182.1.0.446
Trap for non TapeAlert 046. Cause: A cartridge has been modified from an external UI. Required host message: A cartridge has been modified from the Web Specialist or Op Panel.
NOTIFICATION-TYPE    

ibm3584Trap447 1.3.6.1.4.1.2.6.182.1.0.447
Trap for non TapeAlert 047. Cause: A library or drive code load has been initiated from an external UI. Required host message: A library or drive code load has been initiated from the Web Specialist, Op Panel, or CE Tool.
NOTIFICATION-TYPE    

ibm3584Trap448 1.3.6.1.4.1.2.6.182.1.0.448
Trap for non TapeAlert 048. Cause: An Accessor FRU been prepared/finished. Required host message: An Accessor has been placed in the prepared or finished Accessor service state.
NOTIFICATION-TYPE    

ibm3584Trap449 1.3.6.1.4.1.2.6.182.1.0.449
Trap for non TapeAlert 049. Cause: A drive FRU been prepared/finished. Required host message: A drive has been placed in the prepared or finished Accessor service state.
NOTIFICATION-TYPE    

ibm3584Trap450 1.3.6.1.4.1.2.6.182.1.0.450
Trap for non TapeAlert 050. Cause: A drive Serial number has changed. Required host message: A drive Serial number has changed.
NOTIFICATION-TYPE    

ibm3584Trap451 1.3.6.1.4.1.2.6.182.1.0.451
Trap for non TapeAlert 051. Cause: A drive has been power cycled from the web UI. Required host message: A drive has been power cycled via the Web Specialist.
NOTIFICATION-TYPE    

ibm3584Trap452 1.3.6.1.4.1.2.6.182.1.0.452
Trap for non TapeAlert 052. Cause: A node card has been reset from the web UI. Required host message: A node card has been reset via the Web Specialist.
NOTIFICATION-TYPE    

ibm3584MIBCompliances 1.3.6.1.4.1.2.6.182.1.3.1
OBJECT IDENTIFIER    

ibm3584MIBGroups 1.3.6.1.4.1.2.6.182.1.3.2
OBJECT IDENTIFIER    

ibm3584MIBCompliance 1.3.6.1.4.1.2.6.182.1.3.1.1
The compliance statement for the SNMP entities that implement this MIB.
MODULE-COMPLIANCE    

ibm3584MIBNotificationsGroup1 1.3.6.1.4.1.2.6.182.1.3.2.1
Mandatory notification for entities implemented in this MIB.
NOTIFICATION-GROUP    

ibm3584MIBObjectsGroup 1.3.6.1.4.1.2.6.182.1.3.2.3
Mandatory objects for entities implemented in this MIB.
OBJECT-GROUP