IBM-LAN-EMULATION-EXTENSION-MIB

File: IBM-LAN-EMULATION-EXTENSION-MIB.mib (94048 bytes)

Imported modules

SNMPv2-SMI-v1 RFC-1212 SNMPv2-TC-v1
RFC1155-SMI LAN-EMULATION-LES-MIB LAN-EMULATION-ELAN-MIB
BRIDGE-MIB

Imported symbols

Gauge32 Integer32 Counter32
TimeTicks IpAddress Unsigned32
OBJECT-TYPE RowStatus DisplayString
MacAddress TimeStamp enterprises
lesConfEntry IfIndexOrZero BridgeId
Timeout

Defined Types

IbmSEBridgeID  
INTEGER 1..65535    

IbmVlanPortMap  
OCTET STRING Size(1..65535)    

IbmVlanIndex  
Integer32    

IbmVlanType  
INTEGER ip(1), ipx(2), netbios(3), userDefSldWindo(4), mac(5), byPort(6), ipMulticast(7)    

IbmLeServerXLecsMonEntry  
SEQUENCE    
  ibmLeServerXLecsMonIndex Integer32
  ibmLeServerXLecsUsedConnections Gauge32

IbmLeServerXLesMonEntry  
SEQUENCE    
  ibmLeServerXLesMonIndex Integer32
  ibmLeServerXLesMonUsedConnections Gauge32
  ibmLeServerXLesMonLesLecInstances Gauge32

IbmLeServerXBusMonEntry  
SEQUENCE    
  ibmLeServerXBusMonIndex Integer32
  ibmLeServerXBusMonUsedConnections Gauge32
  ibmLeServerXBusMonBusLecInstances Gauge32

IbmLeServerXLesConfigEntry  
SEQUENCE    
  ibmLeServerXLesMinLecID Integer32
  ibmLeServerXLesMaxLecID Integer32

IbmSEPortStatisticsEntry  
SEQUENCE    
  ibmSEBridgeId IbmSEBridgeID
  ibmSEPortNum INTEGER
  ibmSEPortArpRequestsIn Counter32
  ibmSEPortArpRequestsOut Counter32
  ibmSEArpRequestsErrors Counter32
  ibmSEPortArpRequestsDroppedPortBlocked Counter32
  ibmSEPortArpRequestsFiltered Counter32
  ibmSEPortArpRepliesIn Counter32
  ibmSEPortArpRepliesOut Counter32
  ibmSEPortArpRepliesErrors Counter32
  ibmSEPortNarpRequestsIn Counter32
  ibmSEPortNarpRequestsOut Counter32
  ibmSEPortNarpRequestsDroppedPortBlocked Counter32
  ibmSEPortFlushRequestsIn Counter32
  ibmSEPortFlushRequestsOut Counter32
  ibmSEPortFlushRepliesIn Counter32
  ibmSEPortFlushRepliesOut Counter32
  ibmSEPortFlushRequestErrors Counter32
  ibmSEPortFlushRepliesErrors Counter32
  ibmSEPortLeCtrlFramesIn Counter32
  ibmSEPortLeCtrlFramesOut Counter32
  ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd Counter32
  ibmSEPortLeCtrlFramesDiscDestPortNotFwrd Counter32

IbmSEBridgeConfigEntry  
SEQUENCE    
  ibmSEAtmIfNumber IfIndexOrZero
  ibmSEEnabled INTEGER
  ibmSEName DisplayString
  ibmSEFrameSize INTEGER
  ibmSEMacCacheAge INTEGER
  ibmSERDCacheAge INTEGER
  ibmSEPriority INTEGER
  ibmSEMaxAge INTEGER
  ibmSEBridgeHelloTime INTEGER
  ibmSEBridgeForwardDelay INTEGER
  ibmSEBridgeAddress MacAddress
  ibmSEType INTEGER
  ibmSEConfigRowStatus RowStatus

IbmSEPortConfigEntry  
SEQUENCE    
  ibmSEPortIfNumber INTEGER
  ibmSEPortElanName DisplayString
  ibmSEPortRemoteElan INTEGER
  ibmSEPortEnabled INTEGER
  ibmSEPortPriority INTEGER
  ibmSEPortRootCost INTEGER
  ibmSEPortRowStatus RowStatus

IbmSEBridgeEntry  
SEQUENCE    
  ibmSENumPorts INTEGER
  ibmSEProtocolSpecification INTEGER
  ibmSETimeSinceTopologyChange TimeTicks
  ibmSETopChanges Counter32
  ibmSEDesignatedRoot BridgeId
  ibmSERootCost INTEGER
  ibmSERootPort INTEGER
  ibmSEBridgeMaxAge Timeout
  ibmSEHelloTime Timeout
  ibmSEHoldTime INTEGER
  ibmSEForwardDelay Timeout
  ibmSEMacLearnedEntryDiscards Counter32
  ibmSERDLearnedEntryDiscards Counter32

IbmSEStpPortEntry  
SEQUENCE    
  ibmSEStpPortState INTEGER
  ibmSEStpPortDesignatedRoot BridgeId
  ibmSEStpPortDesignatedCost INTEGER
  ibmSEStpPortDesignatedBridge BridgeId
  ibmSEStpPortDesignatedPort INTEGER
  ibmSEStpPortForwardTransitions Counter32
  ibmSEPortMaxInfo INTEGER

IbmSEPortDataStatisticsEntry  
SEQUENCE    
  ibmSEPortInFrames Counter32
  ibmSEPortOutFrames Counter32
  ibmSEPortRoutedInFrames Counter32
  ibmSEPortBpduFrames Counter32
  ibmSEPortInDiscards Counter32
  ibmSEPortDropSrcAddrFilters Counter32
  ibmSEPortDropDestAddrFilters Counter32
  ibmSEPortDropProtocolFilters Counter32
  ibmSEPortDropSrcNotFwds Counter32
  ibmSEPortDropDestNotFwds Counter32
  ibmSEPortDropInputOverflows Counter32
  ibmSEPortDropBpduOverflows Counter32
  ibmSEPortDropSrOverflows Counter32
  ibmSEPortRecNoBuffFailures Counter32
  ibmSEPortTransmitFailures Counter32
  ibmSEPortToBigFailures Counter32
  ibmSEPortLanIdFailures Counter32
  ibmSEPortStpLanIdFailures Counter32

IbmBbcmConfigEntry  
SEQUENCE    
  ibmBbcmConfigIndex IbmSEBridgeID
  ibmBbcmName DisplayString
  ibmBbcmConfigRowStatus RowStatus

IbmBbcmProtocolConfigEntry  
SEQUENCE    
  ibmBbcmProtocolType INTEGER
  ibmBbcmProtocolOperStatus INTEGER
  ibmBbcmProtocolAdminStatus INTEGER
  ibmBbcmProtocolCacheAge Integer32

IbmBbcmStatEntry  
SEQUENCE    
  ibmBbcmStatProtocolType INTEGER
  ibmBbcmStatInReceives Counter32
  ibmBbcmStatInOctets Counter32
  ibmBbcmStatOutManaged Counter32
  ibmBbcmStatOutManagedOctets Counter32
  ibmBbcmStatOutNotManaged Counter32
  ibmBbcmStatOutNotManagedOctets Counter32
  ibmBbcmStatOutFiltered Counter32
  ibmBbcmStatOutFilteredOctets Counter32

IbmVlanConfEntry  
SEQUENCE    
  ibmVlanConfIndex IbmVlanIndex
  ibmVlanConfBridgeId IbmSEBridgeID
  ibmVlanConfType IbmVlanType
  ibmVlanConfAgingTimer Unsigned32
  ibmVlanConfForwardingPortMap IbmVlanPortMap
  ibmVlanConfIncludedPortMap IbmVlanPortMap
  ibmVlanConfExcludedPortMap IbmVlanPortMap
  ibmVlanConfName DisplayString
  ibmVlanConfRowStatus RowStatus

IbmVlanIpConfEntry  
SEQUENCE    
  ibmVlanIpNetworkAddr IpAddress
  ibmVlanIpNetworkMask IpAddress
  ibmVlanIpCutThruFromHere INTEGER
  ibmVlanIpCutThruToHere INTEGER

IbmVlanIpxConfEntry  
SEQUENCE    
  ibmVlanIpxNetworkAddr OCTET STRING Size(4)

IbmVlanUDSWConfEntry  
SEQUENCE    
  ibmVlanUDSWOffsetType INTEGER
  ibmVlanUDSWOffset INTEGER
  ibmVlanUDSWMask OCTET STRING
  ibmVlanUDSWFilter OCTET STRING

IbmVlanMacConfEntry  
SEQUENCE    
  ibmVlanMacAddrIndex Integer32
  ibmVlanMacAddresses OCTET STRING
  ibmVlanMacAddrConfRowStatus RowStatus

IbmVlanStatusEntry  
SEQUENCE    
  ibmVlanOperStatus INTEGER
  ibmVlanAdminStatus INTEGER
  ibmVlanProcessedPackets Counter32
  ibmVlanDiscardedPackets Counter32
  ibmVlanDiscPktsMac MacAddress

IbmVlanIpStatusEntry  
SEQUENCE    
  ibmVlanIpCutThruFromPkts Counter32
  ibmVlanIpCutThruToPkts Counter32
  ibmVlanIpCutThruFromDiscPkts Counter32
  ibmVlanIpCutThruToDiscPkts Counter32

Defined Values

lanEmulation 1.3.6.1.4.1.2.5.8
OBJECT IDENTIFIER    

ibm 1.3.6.1.4.1.2
OBJECT IDENTIFIER    

ibmArchitecture 1.3.6.1.4.1.2.5
OBJECT IDENTIFIER    

ibmLeServerX 1.3.6.1.4.1.2.5.8.3
OBJECT IDENTIFIER    

ibmLeClientX 1.3.6.1.4.1.2.5.8.4
OBJECT IDENTIFIER    

ibmLeMIBConformance 1.3.6.1.4.1.2.5.8.5
OBJECT IDENTIFIER    

ibmLeServerXMonitoring 1.3.6.1.4.1.2.5.8.3.1
OBJECT IDENTIFIER    

ibmLeServerXConfig 1.3.6.1.4.1.2.5.8.3.2
OBJECT IDENTIFIER    

ibmLeServerXMon 1.3.6.1.4.1.2.5.8.3.1.1
OBJECT IDENTIFIER    

ibmSuperELAN 1.3.6.1.4.1.2.5.8.4.1
OBJECT IDENTIFIER    

ibmBbcmMIB 1.3.6.1.4.1.2.5.8.4.2
OBJECT IDENTIFIER    

ibmBbcmConfigGroup 1.3.6.1.4.1.2.5.8.4.2.1
OBJECT IDENTIFIER    

ibmBbcmStatsGroup 1.3.6.1.4.1.2.5.8.4.2.2
OBJECT IDENTIFIER    

ibmVlan 1.3.6.1.4.1.2.5.8.4.3
OBJECT IDENTIFIER    

ibmVlanGGroup 1.3.6.1.4.1.2.5.8.4.3.1
OBJECT IDENTIFIER    

ibmVlanGOGroup 1.3.6.1.4.1.2.5.8.4.3.1.1
OBJECT IDENTIFIER    

ibmVlanCGroup 1.3.6.1.4.1.2.5.8.4.3.2
OBJECT IDENTIFIER    

ibmVlanConfGroup 1.3.6.1.4.1.2.5.8.4.3.2.1
OBJECT IDENTIFIER    

ibmVlanStatusGroup 1.3.6.1.4.1.2.5.8.4.3.3
OBJECT IDENTIFIER    

ibmLeMIBGroups 1.3.6.1.4.1.2.5.8.5.1
OBJECT IDENTIFIER    

ibmLeMIBCompliances 1.3.6.1.4.1.2.5.8.5.2
OBJECT IDENTIFIER    

ibmLeServerXMonLecsInstances 1.3.6.1.4.1.2.5.8.3.1.1.1
The number of LECS instances currently created on this agent.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXMonLesInstances 1.3.6.1.4.1.2.5.8.3.1.1.2
The number of LES instances currently created on this agent.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXMonBusInstances 1.3.6.1.4.1.2.5.8.3.1.1.3
The number of BUS instances currently created on this agent.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXLecsMonTable 1.3.6.1.4.1.2.5.8.3.1.2
This table provides monitoring of LECS instances.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmLeServerXLecsMonEntry

ibmLeServerXLecsMonEntry 1.3.6.1.4.1.2.5.8.3.1.2.1
Entries of ibmLeServerXLecsMonTable.
OBJECT-TYPE    
  IbmLeServerXLecsMonEntry  

ibmLeServerXLecsMonIndex 1.3.6.1.4.1.2.5.8.3.1.2.1.1
The index used to identify this LECS instance on this agent. This variable has the same value as the lecsConfIndex used to identify this instance in the LECS MIB.
OBJECT-TYPE    
  Integer32 0..214748364  

ibmLeServerXLecsUsedConnections 1.3.6.1.4.1.2.5.8.3.1.2.1.2
The number of virtual connections currently in use by this LECS instance.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXLesMonTable 1.3.6.1.4.1.2.5.8.3.1.3
This table provides monitoring of LES instances.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmLeServerXLesMonEntry

ibmLeServerXLesMonEntry 1.3.6.1.4.1.2.5.8.3.1.3.1
Entries of ibmLeServerXLesMonTable.
OBJECT-TYPE    
  IbmLeServerXLesMonEntry  

ibmLeServerXLesMonIndex 1.3.6.1.4.1.2.5.8.3.1.3.1.1
The index used to identify this LES instance on this agent. This variable has the same value as the lesConfIndex used to identify this instance in the LES MIB.
OBJECT-TYPE    
  Integer32 0..214748364  

ibmLeServerXLesMonUsedConnections 1.3.6.1.4.1.2.5.8.3.1.3.1.2
The number of virtual connections currently in use by this LES instance.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXLesMonLesLecInstances 1.3.6.1.4.1.2.5.8.3.1.3.1.3
The number of clients currently served by this LES instance. This is the number of entries in the lesLecTable which have successfully joined this LES instance.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXBusMonTable 1.3.6.1.4.1.2.5.8.3.1.4
This table provides monitoring of BUS instances.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmLeServerXBusMonEntry

ibmLeServerXBusMonEntry 1.3.6.1.4.1.2.5.8.3.1.4.1
Entries of ibmLeServerXBusMonTable.
OBJECT-TYPE    
  IbmLeServerXBusMonEntry  

ibmLeServerXBusMonIndex 1.3.6.1.4.1.2.5.8.3.1.4.1.1
The index used to identify this BUS instance on this agent. This variable has the same value as the busConfIndex used to identify this instance in the BUS MIB.
OBJECT-TYPE    
  Integer32 0..214748364  

ibmLeServerXBusMonUsedConnections 1.3.6.1.4.1.2.5.8.3.1.4.1.2
The number of virtual connections currently in use by this BUS instance.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXBusMonBusLecInstances 1.3.6.1.4.1.2.5.8.3.1.4.1.3
The number of clients currently served by this BUS instance. This is the number of entries in the busLecTable.
OBJECT-TYPE    
  Gauge32  

ibmLeServerXLesConfigTable 1.3.6.1.4.1.2.5.8.3.2.1
This table provides extension for LES configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmLeServerXLesConfigEntry

ibmLeServerXLesConfigEntry 1.3.6.1.4.1.2.5.8.3.2.1.1
Entries of ibmLeServerXLesConfigTable.
OBJECT-TYPE    
  IbmLeServerXLesConfigEntry  

ibmLeServerXLesMinLecID 1.3.6.1.4.1.2.5.8.3.2.1.1.1
The minimum number on the LEC ID range in use by by this LES instance. The default value is 1 the first possible LEC ID.
OBJECT-TYPE    
  Integer32 1..65279  

ibmLeServerXLesMaxLecID 1.3.6.1.4.1.2.5.8.3.2.1.1.2
The maximum number on the LEC ID range in use by by this LES instance. The default value is 65279 the last possible LEC ID.
OBJECT-TYPE    
  Integer32 1..65279  

ibmSEPortStatisticsTable 1.3.6.1.4.1.2.5.8.4.1.1
This table contains statistics about LAN Emulation Control Frame Statistics for Super ELAN Bridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEPortStatisticsEntry

ibmSEPortStatisticsEntry 1.3.6.1.4.1.2.5.8.4.1.1.1
A list of LE Control Frame statistical information for each SEB port
OBJECT-TYPE    
  IbmSEPortStatisticsEntry  

ibmSEBridgeId 1.3.6.1.4.1.2.5.8.4.1.1.1.1
The identifier of the Super ELAN Bridge which this LAN Emulation Client has joined.
OBJECT-TYPE    
  IbmSEBridgeID  

ibmSEPortNum 1.3.6.1.4.1.2.5.8.4.1.1.1.2
The bridge port number associated with this Super ELAN Bridge LAN Emulation Client. This variable directly corresponds, is equal to, the dot1dBasePort variable in rfc1493.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEPortArpRequestsIn 1.3.6.1.4.1.2.5.8.4.1.1.1.3
The number of LE ARP Requests received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRequestsOut 1.3.6.1.4.1.2.5.8.4.1.1.1.4
The number of bridged LE ARP Requests transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEArpRequestsErrors 1.3.6.1.4.1.2.5.8.4.1.1.1.5
The number of received LE ARP Requests that were not bridged by the SEB port
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRequestsDroppedPortBlocked 1.3.6.1.4.1.2.5.8.4.1.1.1.6
The number of outgoing ARP Requests that were dropped by the SEB port because the port was in the blocking state.
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRequestsFiltered 1.3.6.1.4.1.2.5.8.4.1.1.1.7
The number of received LE ARP Requests discarded by the SEB port because the target MAC address in the LE ARP Request was filtered by the bridge.
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRepliesIn 1.3.6.1.4.1.2.5.8.4.1.1.1.8
The number of LE ARP Responses received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRepliesOut 1.3.6.1.4.1.2.5.8.4.1.1.1.9
The number of bridged LE ARP Responses transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortArpRepliesErrors 1.3.6.1.4.1.2.5.8.4.1.1.1.10
The number of received LE ARP Responses that were dropped by the SEB port because the SEB port originating the corresponding LE ARP Request could not be determined.
OBJECT-TYPE    
  Counter32  

ibmSEPortNarpRequestsIn 1.3.6.1.4.1.2.5.8.4.1.1.1.11
The number of LE NARP Requests received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortNarpRequestsOut 1.3.6.1.4.1.2.5.8.4.1.1.1.12
The number of bridged LE NARP Requests transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortNarpRequestsDroppedPortBlocked 1.3.6.1.4.1.2.5.8.4.1.1.1.13
The number of bridged LE NARP Requests that were dropped by the SEB port because the port was in the blocking state.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRequestsIn 1.3.6.1.4.1.2.5.8.4.1.1.1.14
The number of LE Flush Requests received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRequestsOut 1.3.6.1.4.1.2.5.8.4.1.1.1.15
The number of bridged LE Flush Requests transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRepliesIn 1.3.6.1.4.1.2.5.8.4.1.1.1.16
The number of LE Flush Responses received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRepliesOut 1.3.6.1.4.1.2.5.8.4.1.1.1.17
The number of bridged LE Flush Responses transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRequestErrors 1.3.6.1.4.1.2.5.8.4.1.1.1.18
The number of bridged LE Flush Request Errors for this SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortFlushRepliesErrors 1.3.6.1.4.1.2.5.8.4.1.1.1.19
The number of bridged LE Flush Replies Errors for this SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortLeCtrlFramesIn 1.3.6.1.4.1.2.5.8.4.1.1.1.20
The total number of LE Control frames received by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortLeCtrlFramesOut 1.3.6.1.4.1.2.5.8.4.1.1.1.21
The total number of LE Control frames transmitted by the SEB port.
OBJECT-TYPE    
  Counter32  

ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd 1.3.6.1.4.1.2.5.8.4.1.1.1.22
The total number of LE Control frames discarded because the SEB source port is not forwarding.
OBJECT-TYPE    
  Counter32  

ibmSEPortLeCtrlFramesDiscDestPortNotFwrd 1.3.6.1.4.1.2.5.8.4.1.1.1.23
The total number of LE Control frames discarded because the SEB destination port is not forwarding.
OBJECT-TYPE    
  Counter32  

ibmSEBridgeConfigTable 1.3.6.1.4.1.2.5.8.4.1.2
A table that contains the Super ELAN Bridge (SEB) Configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEBridgeConfigEntry

ibmSEBridgeConfigEntry 1.3.6.1.4.1.2.5.8.4.1.2.1
The configuration information for each Super ELAN Bridge instance
OBJECT-TYPE    
  IbmSEBridgeConfigEntry  

ibmSEAtmIfNumber 1.3.6.1.4.1.2.5.8.4.1.2.1.1
The ATM interface number the Super ELAN (SE) bridging function is associated with. This number is used to determine the NETWORK ID. A SE Bridge (SEB) may span ATM adapters but they have to be on the same network, as specified by the Network ID. The specific requirement is that the LECs in the Super ELAN can establish a Data Direct VCC. The Network ID is an ATM configuration parameter that is required to allow Data Direct VCC's to be established. The value of this object must match an existing value in the ifTable. This object is set to zero when the ATM interface is not specified and the agent must determine itself which ATM interface it is to use. If the agent can not determine a default ATM interface an error should be returned by the agent.
OBJECT-TYPE    
  IfIndexOrZero  

ibmSEEnabled 1.3.6.1.4.1.2.5.8.4.1.2.1.2
When enabled(1) the SE Bridge (SEB) will bridge frames to the ports defined in its bridging domain. When disabled(2) the SEB will not bridge frames.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmSEName 1.3.6.1.4.1.2.5.8.4.1.2.1.3
This is a user provided name to associate with the SEB. The SEB name is independent of the ELANs names of the constituent ELANs of the SEB. No default, name must be specified.
OBJECT-TYPE    
  DisplayString Size(1..32)  

ibmSEFrameSize 1.3.6.1.4.1.2.5.8.4.1.2.1.4
Indicates the maximum SuperElan frame size. All ELANs in a single SEB must be set to the same maximum frame size. Valid Values 1516, 4544, 9234, 18190 Default for Ethernet 1516, the Default for Token Ring is 4544 Since ibmSEType defaults to Token Ring the MIB documents the ibmSEFrameSize DEFVAL to be 4544. However, if on row creation ibmSEType is set to Ethernet sebEN(1), and ibmSEFrameSize is not specified, the default value used by the agent should be 1516.
OBJECT-TYPE    
  INTEGER en1516(1516), tr4544(4544), tr9234(9234), tr18190(18190)  

ibmSEMacCacheAge 1.3.6.1.4.1.2.5.8.4.1.2.1.5
The number of seconds a learned MAC address remains in the data frame forwarding cache without revalidation.
OBJECT-TYPE    
  INTEGER 10..1000000  

ibmSERDCacheAge 1.3.6.1.4.1.2.5.8.4.1.2.1.6
The number of seconds a learned route descriptor remains in the data frame forwarding cache without revalidation.
OBJECT-TYPE    
  INTEGER 10..1000000  

ibmSEPriority 1.3.6.1.4.1.2.5.8.4.1.2.1.7
The SuperElan Bridge spanning tree priority. A lower value will increase the likelihood of a SuperElan bridge becoming the root. This value is appended to the SuperElan Spanning Tree MAC Address to form a SuperElan Bridge ID.
OBJECT-TYPE    
  INTEGER 0..65535  

ibmSEMaxAge 1.3.6.1.4.1.2.5.8.4.1.2.1.8
The age at which the current Spanning Tree configuration is deemed too old. A value to small may cause the spanning tree to unnecessarily reconfigure. A value to large will increase the time it takes for the spanning tree to form once an outage is detected.
OBJECT-TYPE    
  INTEGER 6..40  

ibmSEBridgeHelloTime 1.3.6.1.4.1.2.5.8.4.1.2.1.9
The interval of time in seconds between the generation of Spanning Tree configuration messages generate by the root. Lower values increase the spanning tree robustness, but increase network traffic overhead. Higher values decrease network control traffic but decrease spanning tree robustness.
OBJECT-TYPE    
  INTEGER 1..10  

ibmSEBridgeForwardDelay 1.3.6.1.4.1.2.5.8.4.1.2.1.10
The delay in seconds that the SEB waits before transitioning to the next port state. The forward delay should be large enough to allow all Super ELAN bridges in the SuperELAN to disable ports in the new topology while the new spanning tree is being set up prior to forwarding data frames. Values too low might cause temporary loops in the SuperELAN, because not all bridges will complete the spanning tree updates. While values too large, lengthen network partitions after the spanning tree has converged, which causes data frame delays. The default value indicated that the bridge will begin forwarding frames 30 seconds after the spanning tree has converged: 15 seconds in listening state and 15 seconds in learning state.
OBJECT-TYPE    
  INTEGER 4..30  

ibmSEBridgeAddress 1.3.6.1.4.1.2.5.8.4.1.2.1.11
The Bridge MAC Address identifies the SuperELAN for the purposes of maintaining the SEB Spanning tree. If no value is configured, the SEB interface with the lowest MAC address will be used. This 6 octet Spanning Tree MAC Address is added to the value of the SuperELAN priority found in ibmSEPriority to create a SEB ID.
OBJECT-TYPE    
  MacAddress  

ibmSEType 1.3.6.1.4.1.2.5.8.4.1.2.1.12
This object indicates the type of SEB. sebEN(1) specifies a type of Ethernet, sebTR(2) specific's a type of Token Ring.
OBJECT-TYPE    
  INTEGER sebEN(1), sebTR(2)  

ibmSEConfigRowStatus 1.3.6.1.4.1.2.5.8.4.1.2.1.13
This object is used to create or delete entries (rows) in the SuperElan Bridge Configuration Table.
OBJECT-TYPE    
  RowStatus  

ibmSEPortConfigTable 1.3.6.1.4.1.2.5.8.4.1.3
A table that contains SuperELAN Bridge Port Configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEPortConfigEntry

ibmSEPortConfigEntry 1.3.6.1.4.1.2.5.8.4.1.3.1
The configuration information for each SuperELAN Bridge Port
OBJECT-TYPE    
  IbmSEPortConfigEntry  

ibmSEPortIfNumber 1.3.6.1.4.1.2.5.8.4.1.3.1.1
The interface number associated with this port.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEPortElanName 1.3.6.1.4.1.2.5.8.4.1.3.1.2
The ELAN Name in which the SuperElan Bridge LEC participates. If the ELAN Name matches that of a LES/BUS on the same node, a SEB-LEC interface is automatically added to the configuration, and the SEB-LEC parameters needed to join the ELAN are read from the local ELAN configuration. If the ELAN name does not match that of a LES/BUS on the same node, the SEB-LEC must be configured to join the specified ELAN. No Default value a name must be specified.
OBJECT-TYPE    
  DisplayString Size(1..32)  

ibmSEPortRemoteElan 1.3.6.1.4.1.2.5.8.4.1.3.1.3
This object indicates whether or not the Super ELAN LE Services (LES/BUS) for the ELAN specified by ibmSEPortElanName are local to the same node as the port or not. If false(2) the LE Services are local, if true(1) the LE Services are remote (not resident at the same node as the SuperElan). Default is local ELAN.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ibmSEPortEnabled 1.3.6.1.4.1.2.5.8.4.1.3.1.4
When enabled(1) the SuperELAN will bridge frames through this SEB port. When disabled(2) the SuperELAN will not bridge frames through this port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmSEPortPriority 1.3.6.1.4.1.2.5.8.4.1.3.1.5
This value influences which port is used when two or more ports are connected to the same network segment. This situation may cause a routing loop and a the priority provides a port selection method. A lower value represents a higher priority. ?Is Define ports and interfaces as bit 16 going to be a problem.? Put in to agent capabilities and check in agent.
OBJECT-TYPE    
  INTEGER 0..255  

ibmSEPortRootCost 1.3.6.1.4.1.2.5.8.4.1.3.1.6
The cost added to the root path cost in the Spanning Tree configuration message received on this port in order to determine the path cost to get to the root bridge through this port. Setting this value small increases the probability that this port will be close to the root bridge, and thus asked to carry more broadcast and unknown unicast traffic.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEPortRowStatus 1.3.6.1.4.1.2.5.8.4.1.3.1.7
This object is used to create or delete entries (rows) in the SuperElan Bridge Port Configuration Table.
OBJECT-TYPE    
  RowStatus  

ibmSEBridgeTable 1.3.6.1.4.1.2.5.8.4.1.4
A table that contains bridge information for the SEB.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEBridgeEntry

ibmSEBridgeEntry 1.3.6.1.4.1.2.5.8.4.1.4.1
Each entry (row) contains additional SEB pertaining to a specific SEB instance.
OBJECT-TYPE    
  IbmSEBridgeEntry  

ibmSENumPorts 1.3.6.1.4.1.2.5.8.4.1.4.1.1
The number of ports defined for this SEB. This number can be used to determine the next available port number for row creation in any of the SEB Port Tables. Of course the next available index is determined by adding one to the number of ports defined.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEProtocolSpecification 1.3.6.1.4.1.2.5.8.4.1.4.1.2
The protocol type used for this SEB. Currently only Transparent Bridging with Source Route Awareness (tbSra(2)) is the only defined protocol type for SEB's.
OBJECT-TYPE    
  INTEGER unknown(1), tbSra(2)  

ibmSETimeSinceTopologyChange 1.3.6.1.4.1.2.5.8.4.1.4.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
OBJECT-TYPE    
  TimeTicks  

ibmSETopChanges 1.3.6.1.4.1.2.5.8.4.1.4.1.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
OBJECT-TYPE    
  Counter32  

ibmSEDesignatedRoot 1.3.6.1.4.1.2.5.8.4.1.4.1.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
OBJECT-TYPE    
  BridgeId  

ibmSERootCost 1.3.6.1.4.1.2.5.8.4.1.4.1.6
The cost of the path to the root as seen from this bridge.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSERootPort 1.3.6.1.4.1.2.5.8.4.1.4.1.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEBridgeMaxAge 1.3.6.1.4.1.2.5.8.4.1.4.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout 1..65535  

ibmSEHelloTime 1.3.6.1.4.1.2.5.8.4.1.4.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout 1..65535  

ibmSEHoldTime 1.3.6.1.4.1.2.5.8.4.1.4.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEForwardDelay 1.3.6.1.4.1.2.5.8.4.1.4.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to ibmSEBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
OBJECT-TYPE    
  Timeout 1..65535  

ibmSEMacLearnedEntryDiscards 1.3.6.1.4.1.2.5.8.4.1.4.1.12
The total number of Mac Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
OBJECT-TYPE    
  Counter32  

ibmSERDLearnedEntryDiscards 1.3.6.1.4.1.2.5.8.4.1.4.1.13
The total number of Route Descriptor Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
OBJECT-TYPE    
  Counter32  

ibmSEStpPortTable 1.3.6.1.4.1.2.5.8.4.1.5
A table that contains port-specific information and Spanning Tree Protocol information for each SEB Port.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEStpPortEntry

ibmSEStpPortEntry 1.3.6.1.4.1.2.5.8.4.1.5.1
A list of SEB information maintained for each SEB port.
OBJECT-TYPE    
  IbmSEStpPortEntry  

ibmSEStpPortState 1.3.6.1.4.1.2.5.8.4.1.5.1.1
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see ibmSEPortEnable), this object will have a value of disabled(1). forwarding(1) - port is in forwarding state learning(2) - port is in learning state listening(3) - port is in listening state blocked(4) - this port is blocked by spanning tree configured(5) - this port is waiting for spanning tree netdown(6) - this ports network interface is down configuring(7) - this port is loading LEC configuration unknown(8) - this port is in some unknown state
OBJECT-TYPE    
  INTEGER forwarding(1), learning(2), listening(3), blocked(4), configured(5), netdown(6), configuring(7), unknown(8)  

ibmSEStpPortDesignatedRoot 1.3.6.1.4.1.2.5.8.4.1.5.1.2
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId  

ibmSEStpPortDesignatedCost 1.3.6.1.4.1.2.5.8.4.1.5.1.3
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEStpPortDesignatedBridge 1.3.6.1.4.1.2.5.8.4.1.5.1.4
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
OBJECT-TYPE    
  BridgeId  

ibmSEStpPortDesignatedPort 1.3.6.1.4.1.2.5.8.4.1.5.1.5
The Port Identifier of the port on the Designated Bridge for this port's segment.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEStpPortForwardTransitions 1.3.6.1.4.1.2.5.8.4.1.5.1.6
The number of times this port has transitioned from the Learning state to the Forwarding state.
OBJECT-TYPE    
  Counter32  

ibmSEPortMaxInfo 1.3.6.1.4.1.2.5.8.4.1.5.1.7
The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
OBJECT-TYPE    
  INTEGER 1..65535  

ibmSEPortDataStatisticsTable 1.3.6.1.4.1.2.5.8.4.1.8
This table contains statistics about LAN Emulation Data Frame Statistics for Super ELAN Bridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmSEPortDataStatisticsEntry

ibmSEPortDataStatisticsEntry 1.3.6.1.4.1.2.5.8.4.1.8.1
A list of LE Data Frame statistical information for each SEB port
OBJECT-TYPE    
  IbmSEPortDataStatisticsEntry  

ibmSEPortInFrames 1.3.6.1.4.1.2.5.8.4.1.8.1.1
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
OBJECT-TYPE    
  Counter32  

ibmSEPortOutFrames 1.3.6.1.4.1.2.5.8.4.1.8.1.2
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
OBJECT-TYPE    
  Counter32  

ibmSEPortRoutedInFrames 1.3.6.1.4.1.2.5.8.4.1.8.1.3
Frames received on this port that were routed, rather than, or in addition to, bridged.
OBJECT-TYPE    
  Counter32  

ibmSEPortBpduFrames 1.3.6.1.4.1.2.5.8.4.1.8.1.4
Count of SE BPDU Frames
OBJECT-TYPE    
  Counter32  

ibmSEPortInDiscards 1.3.6.1.4.1.2.5.8.4.1.8.1.5
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropSrcAddrFilters 1.3.6.1.4.1.2.5.8.4.1.8.1.6
Frames dropped due to Source Address filtering
OBJECT-TYPE    
  Counter32  

ibmSEPortDropDestAddrFilters 1.3.6.1.4.1.2.5.8.4.1.8.1.7
Frames dropped due to destination address filtering. These are frames to destinations on the same LAN that they arrived on, or otherwise filtered by the filtering database of the bridge.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropProtocolFilters 1.3.6.1.4.1.2.5.8.4.1.8.1.8
Frames dropped due to user filtering of particular protocol identifiers.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropSrcNotFwds 1.3.6.1.4.1.2.5.8.4.1.8.1.9
Frames received on this port when it was not in forwarding state (mostly in learning state).
OBJECT-TYPE    
  Counter32  

ibmSEPortDropDestNotFwds 1.3.6.1.4.1.2.5.8.4.1.8.1.10
Frames not sent because output port not in forwarding state. Don't know which port they tag on yet.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropInputOverflows 1.3.6.1.4.1.2.5.8.4.1.8.1.11
Frames dropped due to input queue overflow.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropBpduOverflows 1.3.6.1.4.1.2.5.8.4.1.8.1.12
BPDU's dropped due to BPDU input queue overflow.
OBJECT-TYPE    
  Counter32  

ibmSEPortDropSrOverflows 1.3.6.1.4.1.2.5.8.4.1.8.1.13
Source Route Frames dropped due to SR input queue overflow.
OBJECT-TYPE    
  Counter32  

ibmSEPortRecNoBuffFailures 1.3.6.1.4.1.2.5.8.4.1.8.1.14
Receive frames discarded due to no buffer available.
OBJECT-TYPE    
  Counter32  

ibmSEPortTransmitFailures 1.3.6.1.4.1.2.5.8.4.1.8.1.15
Frame Count of transmit failures.
OBJECT-TYPE    
  Counter32  

ibmSEPortToBigFailures 1.3.6.1.4.1.2.5.8.4.1.8.1.16
Count of frames to big to sent on this port.
OBJECT-TYPE    
  Counter32  

ibmSEPortLanIdFailures 1.3.6.1.4.1.2.5.8.4.1.8.1.17
Count of frames discarded due to mismatch in the LAN ID.
OBJECT-TYPE    
  Counter32  

ibmSEPortStpLanIdFailures 1.3.6.1.4.1.2.5.8.4.1.8.1.18
Count of frames discarded due to duplicate LAN ID or spanning tree error.
OBJECT-TYPE    
  Counter32  

ibmBbcmConfigNextId 1.3.6.1.4.1.2.5.8.4.2.1.1
The next available index in the ibmBbcmConfigTable. The value of this object can be used as the index by the network manager to create an entry in the table. This object is no longer required since the ibmBbcmConfigIndex is now specified as the superElanID.
OBJECT-TYPE    
  Integer32 0..214748364  

ibmBbcmConfigTable 1.3.6.1.4.1.2.5.8.4.2.1.2
This table contains configuration values for the Bridging Broadcast Manager (BBCM).
OBJECT-TYPE    
  SEQUENCE OF  
    IbmBbcmConfigEntry

ibmBbcmConfigEntry 1.3.6.1.4.1.2.5.8.4.2.1.2.1
Each entry of the table represents a configured instance of the BBCM.
OBJECT-TYPE    
  IbmBbcmConfigEntry  

ibmBbcmConfigIndex 1.3.6.1.4.1.2.5.8.4.2.1.2.1.1
A value which uniquely identifies a conceptual row of the BBCM Configuration Table. Since BBCM is a bridge based function, each row of this table identifies a unique bridge instance.
OBJECT-TYPE    
  IbmSEBridgeID  

ibmBbcmName 1.3.6.1.4.1.2.5.8.4.2.1.2.1.2
This is the name associated with the bridge instance. It is either the Super Elan Bridge name or the name assigned to the base bridge.
OBJECT-TYPE    
  DisplayString Size(0..32)  

ibmBbcmConfigRowStatus 1.3.6.1.4.1.2.5.8.4.2.1.2.1.3
This object is used to create or delete entries in the ibmBbcmConfigTable.
OBJECT-TYPE    
  RowStatus  

ibmBbcmProtocolConfigTable 1.3.6.1.4.1.2.5.8.4.2.1.3
Each entry of the table represents a configured instance of a specific protocol for a particular BBCM instance.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmBbcmProtocolConfigEntry

ibmBbcmProtocolConfigEntry 1.3.6.1.4.1.2.5.8.4.2.1.3.1
Each entry of the table represents a configuration information for a specific protocol supported by a specific BBCM.
OBJECT-TYPE    
  IbmBbcmProtocolConfigEntry  

ibmBbcmProtocolType 1.3.6.1.4.1.2.5.8.4.2.1.3.1.1
BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. Note: 1 is reserved so ibmBbcmStatProtocolType of 1 can be all. This allows enumeration values to match between ibmBbcmProtocolType and ibmBbcmStatProtocolType.
OBJECT-TYPE    
  INTEGER reserved(1), ip(2)  

ibmBbcmProtocolOperStatus 1.3.6.1.4.1.2.5.8.4.2.1.3.1.2
The current BBCM Status Note for this implementation other is defined only to be consistent with standard LE server MIBs, it has no meaning for the definition.
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

ibmBbcmProtocolAdminStatus 1.3.6.1.4.1.2.5.8.4.2.1.3.1.3
The desired state of the BBCM as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the ibmBbcmProtocolOperStatus.
OBJECT-TYPE    
  INTEGER up(2), down(3)  

ibmBbcmProtocolCacheAge 1.3.6.1.4.1.2.5.8.4.2.1.3.1.4
The number of minutes a protocol is cached by BBCM before being added due to inactivity.
OBJECT-TYPE    
  Integer32 1..214748364  

ibmBbcmStatTable 1.3.6.1.4.1.2.5.8.4.2.2.1
This table contains activity statistics on a BBCM basis.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmBbcmStatEntry

ibmBbcmStatEntry 1.3.6.1.4.1.2.5.8.4.2.2.1.1
Each entry of the tables represents a BBCM protocol instance.
OBJECT-TYPE    
  IbmBbcmStatEntry  

ibmBbcmStatProtocolType 1.3.6.1.4.1.2.5.8.4.2.2.1.1.1
BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. When the protocol type is 1 (allprotocols) the response contains the total count for all protocols supported by this BBCM.
OBJECT-TYPE    
  INTEGER allprotocols(1), ip(2)  

ibmBbcmStatInReceives 1.3.6.1.4.1.2.5.8.4.2.2.1.1.2
Number of packets processed by BBCM for this protocol
OBJECT-TYPE    
  Counter32  

ibmBbcmStatInOctets 1.3.6.1.4.1.2.5.8.4.2.2.1.1.3
Number of Octets processed by BBCM for this protocol. This count is of all octets seen, including control information like headers.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutManaged 1.3.6.1.4.1.2.5.8.4.2.2.1.1.4
Number of packets transformed by BBCM from broadcast to unicast for this protocol.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutManagedOctets 1.3.6.1.4.1.2.5.8.4.2.2.1.1.5
Number of Octets transformed by BBCM from broadcast to unicast for this protocol. This count is of all octets seen, including control information like headers.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutNotManaged 1.3.6.1.4.1.2.5.8.4.2.2.1.1.6
The number of packets seen by BBCM that were left as they were originally broadcast.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutNotManagedOctets 1.3.6.1.4.1.2.5.8.4.2.2.1.1.7
The number of octets seen by BBCM that were left as they were originally broadcast. This count is of all octets seen, including control information like headers.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutFiltered 1.3.6.1.4.1.2.5.8.4.2.2.1.1.8
Number of Packets Filtered by BBCM.
OBJECT-TYPE    
  Counter32  

ibmBbcmStatOutFilteredOctets 1.3.6.1.4.1.2.5.8.4.2.2.1.1.9
Number of Octets Filtered by BBCM.
OBJECT-TYPE    
  Counter32  

ibmVlanConfIndexNextID 1.3.6.1.4.1.2.5.8.4.3.1.1.1
This is the next available Vlan Index for this agent. If should be used when creating rows in the Vlan tables indexed by ibmVlanConfIndex.
OBJECT-TYPE    
  IbmVlanIndex  

ibmVlanTopologyChange 1.3.6.1.4.1.2.5.8.4.3.1.1.2
This is the time stamp at which time the last VLAN Topology Change occurred. This object can be used to monitor the change status of the VLANs controlled by this agent. A change is defined whenever a VLAN has been added, deleted or changes configuration. A change is also defined when a port is discovered or is aged out.
OBJECT-TYPE    
  TimeStamp  

ibmVlanMaxPortMap 1.3.6.1.4.1.2.5.8.4.3.1.1.3
This is the maximum number of octets this agent supports for representing ports in the the Port Map objects which use the textual convention IbmVlanPortMap.
OBJECT-TYPE    
  Integer32  

ibmVlanMaxUDSWMaskFilter 1.3.6.1.4.1.2.5.8.4.3.1.1.4
This is the maximum number of octets this agent supports for ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must contain the same number of octets.
OBJECT-TYPE    
  Integer32  

ibmVlanConfTable 1.3.6.1.4.1.2.5.8.4.3.2.1.1
The layout of the VLAN MIB tables relies on common information and VLAN type specific information. The ibmVlanConfTable is the base table. Columns are added to this table depending on the VLAN type, for example ibmVlanIPConfTable is for IP VLANs, ibmVlanIPXConfTable is for IPX VlANS, ibmVlanUDSWConfTable is for User Defined Sliding Window based VLANs, and ibmVlanMacConfTable is for MAC address defined VLANs. Associated with the extended configuration table is a base status table, ibmVlanStatusTable. This table covers generic status and the USDW and MAC VLAN status requirements are currently defined. Specific status table additions are provided by the ibmVlanIpStatusTable for IP criteria.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanConfEntry

ibmVlanConfEntry 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1
Each entry of the ibmVlanConfTable provides configuration information pertaining to a specific instance of a VLAN.
OBJECT-TYPE    
  IbmVlanConfEntry  

ibmVlanConfIndex 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.1
An index assigned by the agent which uniquely identifies an instance of a VLAN. This objects value is NOT guaranteed to be the same value across agent restarts.
OBJECT-TYPE    
  IbmVlanIndex  

ibmVlanConfBridgeId 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.2
The identifier of the Base Bridge or Super ELAN Bridge which this VLAN is defined as an additional filter for.
OBJECT-TYPE    
  IbmSEBridgeID  

ibmVlanConfType 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.3
The type of VLAN.
OBJECT-TYPE    
  IbmVlanType  

ibmVlanConfAgingTimer 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.4
The amount of time (in minutes) an auto-detect port will remain in the forwarding domain of the VLAN in the absence of traffic from that VLAN. A value of zero means forever.
OBJECT-TYPE    
  Unsigned32  

ibmVlanConfForwardingPortMap 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.5
Defines which ports are in forwarding state for this VLAN. The VLAN port is in forwarding state if one of the following is true: The port has been statically included by setting the corresponding port in ibmVlanIncludedPortMap. The port is not excluded, corresponding port in ibmVlanExcludedPortMap is zero, and the port has seen VLAN traffic in the current age out period, as defined by ibmVlanConfAgingTimer.
OBJECT-TYPE    
  IbmVlanPortMap  

ibmVlanConfIncludedPortMap 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.6
Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently included from the forwarding domain of the VLAN. A value of 1 for the port means it is included. A value of 0 means the port has to be discovered (port traffic seen) to be included in the VLAN.
OBJECT-TYPE    
  IbmVlanPortMap  

ibmVlanConfExcludedPortMap 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.7
Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently excluded from the forwarding domain of the VLAN. A value of 1 for the port means it is excluded from the VLAN even if traffic for this VLAN type is seen on this port. A value of 0 means the port can be discovered.
OBJECT-TYPE    
  IbmVlanPortMap  

ibmVlanConfName 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.8
A node unique user defined name for the VLAN. This name must be unique across all bridge instances at that node (agent).
OBJECT-TYPE    
  DisplayString Size(0..32)  

ibmVlanConfRowStatus 1.3.6.1.4.1.2.5.8.4.3.2.1.1.1.9
This object is used to create or delete entries (rows) in the VLAN Configuration Table.
OBJECT-TYPE    
  RowStatus  

ibmVlanIpConfTable 1.3.6.1.4.1.2.5.8.4.3.2.1.2
The IBM VLAN Configuration Table provides the definitions required to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN) This table defines the filters for the IP or IP Multicast PVLAN Entries in this table must be provided when the corresponding row of the ibmVlanConfTable is being created.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanIpConfEntry

ibmVlanIpConfEntry 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1
Each entry of the ibmVlanIpConfTable provides configuration information pertaining to a specific instance of an IP or IP Multicast PVLAN.
OBJECT-TYPE    
  IbmVlanIpConfEntry  

ibmVlanIpNetworkAddr 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.1
The IP or IP Multicast address of the local forwarding component used to route or bridge traffic for this VLAN. No default value. A default value must be specified when creating an IP or IP Multicast VLAN.
OBJECT-TYPE    
  IpAddress  

ibmVlanIpNetworkMask 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.2
The IP address mask used to 'AND' against the IP address in a received IP frame. The result of the 'AND' operation is compared to the value given in the ibmVlanIPNetworkAddr in order to determine if the frame belongs to the VLAN and should be forwarded. There is no default value. A mask must be specified when creating an IP PVLAN entry in the ibmVlanConfTable. Note: if the ibmVlanConfType is IP Multicast ibmVlanIpNetworkMask the ibmVlanIpNetworkMask is not used. A value 0.0.0.0 should be returned by the agent.
OBJECT-TYPE    
  IpAddress  

ibmVlanIpCutThruFromHere 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.3
Specifies whether IP cut through communications originating from this subnet are enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmVlanIpCutThruToHere 1.3.6.1.4.1.2.5.8.4.3.2.1.2.1.4
Specifies whether IP cut through communications destined for this subnet are enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmVlanIpxConfTable 1.3.6.1.4.1.2.5.8.4.3.2.1.3
The IBM IPX VLAN Configuration Table provides the definitions required to configure an IBM IPX Protocol Virtual LAN (PVLAN). This table defines the filters for the IPX PVLAN. Entries in this table must be provided when the corresponding row of the ibmVlanConfTable is being created.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanIpxConfEntry

ibmVlanIpxConfEntry 1.3.6.1.4.1.2.5.8.4.3.2.1.3.1
Each entry of the ibmVlanIpxConfTable provides configuration information pertaining to a specific instance of an IPX PVLAN.
OBJECT-TYPE    
  IbmVlanIpxConfEntry  

ibmVlanIpxNetworkAddr 1.3.6.1.4.1.2.5.8.4.3.2.1.3.1.1
This is the VLANs IPX Network Address. No Default Value, one must be specified when creating an IPX PVLAN in the ibmVlanConfTable.
OBJECT-TYPE    
  OCTET STRING Size(4)  

ibmVlanUDSWConfTable 1.3.6.1.4.1.2.5.8.4.3.2.1.4
This table defines a 'sliding window' mechanism for the definition of 'policy' or 'user' defined VLANs. The mechanism is based on a set of mask and filter fields that when compared to traffic data permit forwarding decisions for the packet to be made for a VLAN. The window may be moved or slide by defining the appropriate offset type and offset values for the mask and filter object fields. Care must be taken to ensure the consistent configuration of VLAN policies. Once a VLAN entry has been made in the table if a change is made to any of the variables in that row for the VLAN then all other entries in other nodes associated with the VLAN must be updated in a corresponding manner! This table is an auxiliary extension to the base VLAN configuration table defined in ibmVlanConfTable. See that table for additional Vlan details.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanUDSWConfEntry

ibmVlanUDSWConfEntry 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1
Each entry of the ibmVlanUDSWConfTable provides configuration information pertaining to a specific instance of an UDSW VLAN. Entries in this table must be provided when the corresponding row of the ibmVlanConfTable is being created.
OBJECT-TYPE    
  IbmVlanUDSWConfEntry  

ibmVlanUDSWOffsetType 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.1
This object specifies the base location in the traffic frame where the ibmVlanUDSWOffset will be used to start the comparison with the ibmVlanUDSWFilter value to determine if this frame is in a Sliding Window Vlan. Two starting location modes are predefined for LAN Emulation VLANs. udswMacOffset indicates that the starting location is the first byte of the MAC destination address in the traffic frame. This mode may be used for VLAN filtering on MAC addresses, for both Token Ring traffic and Ethernet traffic. The ibmVlanMacConfTable however should be used to define source MAC address based VLANs. This mode may also be used for VLAN filtering on protocol and address information or for other user specified information found in a portion of the LLC information field when source routed Token Ring traffic is NOT the traffic source (due to the presence of the variable size Routing Information Field). udswInfoOffset is a generic way of indicating that the starting location is at the first byte of the LLC information field. This mode may be used for VLAN filtering on protocol and address information or for other user specified information found in a portion of the LLC information field. For source routed Token Ring, this location is not static within the frame since the Routing Information Field (RIF) is of variable length depending on LAN segments in the route. Specifying this mode permits the offset to begin relative to the end of the last byte of the RIF. There is no default value for this entry. The offset type must be defined when creating a user defined sliding window VLAN in the ibmVlanConfTable.
OBJECT-TYPE    
  INTEGER udswMacOffset(1), udswInfoOffset(2)  

ibmVlanUDSWOffset 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.2
This object determines the starting location in the traffic frame that will be used in the comparison with the ibmVlanUDSWFilter value to determine if this frame is in a Sliding Window Vlan. It is specified as a value offset indicating the number of octets from the base location determined by the mode selected in the ibmVlanUSDWOffsetType. udswMacOffset mode indicates that the starting location for the compare is ibmVlanUDSWOffset octets after the the first byte of the MAC destination address. udswInfoOffset mode indicates that the starting location is ibmVlanUDSWOffset octets after the start of the frame's information field. There is no default value and this offset selection mode must be defined when creating a UDSW VLAN in the ibmVlanConfTable.
OBJECT-TYPE    
  INTEGER 0..255  

ibmVlanUDSWMask 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.3
This object determines the size and bit pattern that is compared to the traffic frame at the location specified by the offset type and starting at the offset location in order to produce a result. The size of the mask must be equivalent to the size of the filter defined in ibmVlanUDSWFilter. The value of 1 in a mask bit location has the effect of making a comparison of the mask to the traffic frame significant. The value of a zero in a mask bit location has the effect of making the comparison of the mask with the traffic frame a 'don't care'. The octets in this object are transmitted in most significant byte first order. There is no default value and this mask must be specified when creating a UDSW VLAN in the ibmVlanConfTable.
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

ibmVlanUDSWFilter 1.3.6.1.4.1.2.5.8.4.3.2.1.4.1.4
This object determines the size and bit pattern that is compared to the result after the mask being applied to the traffic frame at the location specified by the offset type and starting at the offset location. The size of the filter must be equivalent to the size of the mask defined in ibmVlanUDSWMask. If the result exactly matches the bit values defined in the filter then the frame is forwarded to the VLAN identified by the index for this table entry. The octets in this object are transmitted in most significant byte first order. There is no default value and this filter must be specified when creating a UDSW VLAN in the ibmVlanConfTable.
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

ibmVlanMacConfTable 1.3.6.1.4.1.2.5.8.4.3.2.1.5
The IBM MAC VLAN Configuration Table provides the definitions required to configure an IBM MAC Virtual LAN (VLAN). This table defines the filters for the IBM MAC VLAN. Entries in this table must be provided when the corresponding row of the ibmVlanConfTable is being created.
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanMacConfEntry

ibmVlanMacConfEntry 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1
Each entry of the ibmVlanMacConfTable provides configuration information pertaining to a specific instance of a MAC VLAN.
OBJECT-TYPE    
  IbmVlanMacConfEntry  

ibmVlanMacAddrIndex 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.1
The MAC address index being used as a filter for this MAC address VLAN.
OBJECT-TYPE    
  Integer32  

ibmVlanMacAddresses 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.2
A string of Source MAC addresses being used as a filter for this MAC address VLAN.
OBJECT-TYPE    
  OCTET STRING Size(0..600)  

ibmVlanMacAddrConfRowStatus 1.3.6.1.4.1.2.5.8.4.3.2.1.5.1.3
This object is used to create or delete entries (rows) in the MAC Address Configuration Table.
OBJECT-TYPE    
  RowStatus  

ibmVlanStatusTable 1.3.6.1.4.1.2.5.8.4.3.3.1
The IBM VLAN Status Table provides the administration and statistics for an IBM Virtual LAN (VLAN).
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanStatusEntry

ibmVlanStatusEntry 1.3.6.1.4.1.2.5.8.4.3.3.1.1
Each entry in the ibmVlanStatusTable augments a specific instance of an IP VLAN.
OBJECT-TYPE    
  IbmVlanStatusEntry  

ibmVlanOperStatus 1.3.6.1.4.1.2.5.8.4.3.3.1.1.1
Current state of the VLAN
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmVlanAdminStatus 1.3.6.1.4.1.2.5.8.4.3.3.1.1.2
Desired state of the VLAN. This change becomes immediate on completion of the set operation and does not require system restart.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ibmVlanProcessedPackets 1.3.6.1.4.1.2.5.8.4.3.3.1.1.3
The number of Broadcast/Multicast packets received by this VLAN.
OBJECT-TYPE    
  Counter32  

ibmVlanDiscardedPackets 1.3.6.1.4.1.2.5.8.4.3.3.1.1.4
The number of Broadcast packets discarded by this VLAN because the source VLAN was excluded on the port.
OBJECT-TYPE    
  Counter32  

ibmVlanDiscPktsMac 1.3.6.1.4.1.2.5.8.4.3.3.1.1.5
The object contains the Source MAC address from the last packet that was discarded because the source VLAN was excluded on the port. This will aid in finding the station that is being excluded. This object is defined as read-write so that a manager can clear the current Source MAC address after identifying the station that is trying to transmit on an excluded port. In order to clear the object the manager can specify a MAC address of all zeros 0x000000000000.
OBJECT-TYPE    
  MacAddress  

ibmVlanIpStatusTable 1.3.6.1.4.1.2.5.8.4.3.3.2
The IBM IP VLAN Status Table provides the administration and statistics for an IBM IP Protocol Virtual LAN (PVLAN).
OBJECT-TYPE    
  SEQUENCE OF  
    IbmVlanIpStatusEntry

ibmVlanIpStatusEntry 1.3.6.1.4.1.2.5.8.4.3.3.2.1
Each entry in the ibmVlanIpStatusTable augments a specific instance of an IP PVLAN.
OBJECT-TYPE    
  IbmVlanIpStatusEntry  

ibmVlanIpCutThruFromPkts 1.3.6.1.4.1.2.5.8.4.3.3.2.1.1
The number of Broadcast/Multicast packets cutThru from this VLAN.
OBJECT-TYPE    
  Counter32  

ibmVlanIpCutThruToPkts 1.3.6.1.4.1.2.5.8.4.3.3.2.1.2
The number of Broadcast/Multicast packets received to this VLAN.
OBJECT-TYPE    
  Counter32  

ibmVlanIpCutThruFromDiscPkts 1.3.6.1.4.1.2.5.8.4.3.3.2.1.3
The number of Broadcast/Multicast packets discarded because cutThru from this VLAN was disabled.
OBJECT-TYPE    
  Counter32  

ibmVlanIpCutThruToDiscPkts 1.3.6.1.4.1.2.5.8.4.3.3.2.1.4
The number of Broadcast/Multicast packets discarded before it is forwarded because cutThru to this VLAN was disabled.
OBJECT-TYPE    
  Counter32  

ibmLeCServerXMonLECSGroup 1.3.6.1.4.1.2.5.8.5.1.1
OBJECT IDENTIFIER    

ibmLeCServerXMonLESGroup 1.3.6.1.4.1.2.5.8.5.1.2
OBJECT IDENTIFIER    

ibmLeCServerXMonBUSGroup 1.3.6.1.4.1.2.5.8.5.1.3
OBJECT IDENTIFIER    

ibmCSuperELANGroup 1.3.6.1.4.1.2.5.8.5.1.4
OBJECT IDENTIFIER    

ibmCBbcmMIBGroup 1.3.6.1.4.1.2.5.8.5.1.5
OBJECT IDENTIFIER    

ibmCVlanMIBGroup 1.3.6.1.4.1.2.5.8.5.1.6
OBJECT IDENTIFIER    

ibmLeMIBCompliance 1.3.6.1.4.1.2.5.8.5.2.1
OBJECT IDENTIFIER