HUAWEI-WLAN-AP-UPDATE-MIB

File: HUAWEI-WLAN-AP-UPDATE-MIB.mib (26446 bytes)

Imported modules

HUAWEI-WLAN-MIB HUAWEI-WLAN-AP-MIB HUAWEI-WLAN-CONFIGURATION-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

hwWlan hwWlanApType hwAPGroupName
hwWlanApName hwWlanApMac hwWlanApId
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
IpAddress Integer32 Unsigned32
Counter64 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE MacAddress RowStatus
DateAndTime

Defined Types

HwWlanApUpdateEntry  
SEQUENCE    
  hwWlanApUpdateFilename STRING
  hwWlanApUpdateAdminOper INTEGER
  hwWlanApUpdatePercent Integer32
  hwWlanApUpdateRowStatus RowStatus

HwWlanApUpdateProgressEntry  
SEQUENCE    
  hwWlanApUpdateProgressStatus INTEGER
  hwWlanApUpdateProgress Integer32
  hwWlanApFlashProgress Integer32
  hwWlanApUpdateType INTEGER
  hwWlanApUpdateFileType INTEGER

HwWlanSingleApUpdateEntry  
SEQUENCE    
  hwWlanSingleApUpdateAdminOper INTEGER
  hwWlanSingleApUpdatePercent Integer32
  hwWlanSingleApUpdateFilename STRING

HwWlanApTypeGroupUpdateEntry  
SEQUENCE    
  hwWlanApTypeGroupUpdateFilename STRING
  hwWlanApTypeGroupUpdateAdminOper INTEGER
  hwWlanApTypeGroupUpdatePercent Integer32
  hwWlanApTypeGroupUpdateRowStatus RowStatus

HwWlanApUpdateScheduleTaskEntry  
SEQUENCE    
  hwWlanApUpdateScheduleTaskId Integer32
  hwWlanApUpdateScheduleTaskStartTime STRING
  hwWlanApUpdateScheduleTaskStopTime STRING
  hwWlanApUpdateScheduleTaskApType Integer32
  hwWlanApUpdateScheduleTaskApGroup STRING
  hwWlanApUpdateScheduleTaskState INTEGER
  hwWlanApUpdateScheduleTaskRowStatus RowStatus

Defined Values

hwWlanApUpdate 1.3.6.1.4.1.2011.6.139.14
The MIB module defines the AP update operation.
MODULE-IDENTITY    

hwWlanApUpdateTrap 1.3.6.1.4.1.2011.6.139.14.1
OBJECT IDENTIFIER    

hwWlanApUpdateBeginTrap 1.3.6.1.4.1.2011.6.139.14.1.1
This object indicates an AP upgrade start alarm..
NOTIFICATION-TYPE    

hwWlanApUpdateResultTrap 1.3.6.1.4.1.2011.6.139.14.1.2
This object indicates the upgrade result alarm.
NOTIFICATION-TYPE    

hwWlanApUpdateUbootNotMatchTrap 1.3.6.1.4.1.2011.6.139.14.1.3
This object indicates that the Uboot version does not match the AP version.
NOTIFICATION-TYPE    

hwWlanApUpdateTrapObjects 1.3.6.1.4.1.2011.6.139.14.2
OBJECT IDENTIFIER    

hwWlanApUpdateResult 1.3.6.1.4.1.2011.6.139.14.2.1
AP upgrade result.
OBJECT-TYPE    
  INTEGER success(1), failureUnknownError(2), failureInsufficientMemory(3), failureDownloadFileFailure(4), failureMismatchVersionEfsAndFileName(5), failureInvalidFileName(6), failureMismatchApTypeInEfs(7), failureFileContentError(8), failureWriteFlashFailure(9), failureTimeoutForUpgrade(10), failureCommunicationFaultApAndAc(11)  

hwWlanApUpdateTime 1.3.6.1.4.1.2011.6.139.14.2.2
AP upgrade time.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateByFileName 1.3.6.1.4.1.2011.6.139.14.2.3
AP upgrade file name.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateNextOper 1.3.6.1.4.1.2011.6.139.14.2.4
Action after the upgrade.
OBJECT-TYPE    
  INTEGER notReset(1), reset(2)  

hwWlanApUpdateResultStatus 1.3.6.1.4.1.2011.6.139.14.2.5
AP upgrade result status.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateObjects 1.3.6.1.4.1.2011.6.139.14.3
OBJECT IDENTIFIER    

hwWlanApUpdateConfig 1.3.6.1.4.1.2011.6.139.14.3.1
OBJECT IDENTIFIER    

hwWlanApUpdateFTPIPAddress 1.3.6.1.4.1.2011.6.139.14.3.1.1
This object indicates the IP address of the FTP server used in FTP upgrade mode.
OBJECT-TYPE    
  IpAddress  

hwWlanApUpdateFTPUsername 1.3.6.1.4.1.2011.6.139.14.3.1.2
This object indicates the user name of the FTP client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress or hwWlanApUpdateFTPIPv6Address.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateFTPPassword 1.3.6.1.4.1.2011.6.139.14.3.1.3
This object indicates the password of the FTP client used in FTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateFTPIPAddress or hwWlanApUpdateFTPIPv6Address.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateMode 1.3.6.1.4.1.2011.6.139.14.3.1.4
This object indicates the AP upgrade mode.
OBJECT-TYPE    
  INTEGER ftp(1), ac(2), sftp(3)  

hwWlanApUpdateSFTPIPAddress 1.3.6.1.4.1.2011.6.139.14.3.1.5
This object indicates the IP address of the SFTP server used in SFTP upgrade mode.
OBJECT-TYPE    
  IpAddress  

hwWlanApUpdateSFTPUsername 1.3.6.1.4.1.2011.6.139.14.3.1.6
This object indicates the user name of the SFTP client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress or hwWlanApUpdateSFTPIPv6Address.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateSFTPPassword 1.3.6.1.4.1.2011.6.139.14.3.1.7
This object indicates the password of the SFTP client used in SFTP upgrade mode. NOTE: It should be configured together with hwWlanApUpdateSFTPIPAddress or hwWlanApUpdateSFTPIPv6Address.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateFTPMaxConnectNum 1.3.6.1.4.1.2011.6.139.14.3.1.8
This object indicates the maximum number of FTP connections.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateSFTPMaxConnectNum 1.3.6.1.4.1.2011.6.139.14.3.1.9
This object indicates the maximum number of SFTP connections.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateFTPIPv6Address 1.3.6.1.4.1.2011.6.139.14.3.1.10
This object indicates the IPv6 address of the FTP server.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateSFTPIPv6Address 1.3.6.1.4.1.2011.6.139.14.3.1.11
This object indicates the IPv6 address of the SFTP server.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateTable 1.3.6.1.4.1.2011.6.139.14.3.2
This table maps AP types to upgrade file names. It allows you to upgrade APs in batches based on AP types.
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApUpdateEntry

hwWlanApUpdateEntry 1.3.6.1.4.1.2011.6.139.14.3.2.1
The index of this table is hwWlanApType.
OBJECT-TYPE    
  HwWlanApUpdateEntry  

hwWlanApUpdateFilename 1.3.6.1.4.1.2011.6.139.14.3.2.1.1
This object indicates the name of the upgrade file matching the type of the APs to be upgraded.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateAdminOper 1.3.6.1.4.1.2011.6.139.14.3.2.1.2
This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwWlanApUpdatePercent 1.3.6.1.4.1.2011.6.139.14.3.2.1.3
This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateRowStatus 1.3.6.1.4.1.2011.6.139.14.3.2.1.4
This object indicates the row status of this table.
OBJECT-TYPE    
  RowStatus  

hwWlanApUpdateProgressTable 1.3.6.1.4.1.2011.6.139.14.3.3
This table is used to query the AP upgrade progress.
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApUpdateProgressEntry

hwWlanApUpdateProgressEntry 1.3.6.1.4.1.2011.6.139.14.3.3.1
The index of this table is hwWlanApMac.
OBJECT-TYPE    
  HwWlanApUpdateProgressEntry  

hwWlanApUpdateProgressStatus 1.3.6.1.4.1.2011.6.139.14.3.3.1.1
This object indicates the AP upgrade status.
OBJECT-TYPE    
  INTEGER noUpdateResult(1), updating(2), updateSuccessful(3), updateFailed(4), insufficientApMemory(5), failToDownloadFile(6), efsAndVersionMismatched(7), invalidFileName(8), efsAndApTypeMismatched(9), fileContentError(10), writingMemoryError(11), updateTimeout(12), apAcLinkDown(13), noNeedToUpdate(14), updateCancel(15), sendFirstFileFailed(16), receiveFileFailed(17), retransferFileFailed(18), updateOverMaxTime(19), noResult(20), waitForNextBatch(21), noNeedUpdateNeedReset(22), neitherNeedUpdateNorReset(23), fileLoading(24), identifierErr(25), notInConfig(26), getFtpInfoFailed(27), getSftpInfoFailed(28), blockFull(29), readFileFailed(30), normalToStandby(31), modeChanged(32), succeedNeedReset(33), succeedAutoResetting(34), sendUpgradeCfgErr(35), sendUpgradeRequestErr(36), waitFragmentationTimeout(37), upgradeCfgResponseErr(38), processUpgradeFilenameErr(39), cannotGetApType(40), batchUpgradeApTypeMismatched(41), analyzeVersionErr(42), ageTimeOut(43), isUpdatingNow(44), succeedNeedModeSwitch(45), updateFsmStateCheckFailed(46), fileChanged(47), noUpdateProgressStatus(255)  

hwWlanApUpdateProgress 1.3.6.1.4.1.2011.6.139.14.3.3.1.2
This object indicates the AP upgrade progress.
OBJECT-TYPE    
  Integer32  

hwWlanApFlashProgress 1.3.6.1.4.1.2011.6.139.14.3.3.1.3
This object indicates the flash writing progress.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateType 1.3.6.1.4.1.2011.6.139.14.3.3.1.4
This object indicates the AP upgrade type.
OBJECT-TYPE    
  INTEGER autoUpdate(1), onlineUpdate(2)  

hwWlanApUpdateFileType 1.3.6.1.4.1.2011.6.139.14.3.3.1.5
This object indicates the AP upgrade file type.
OBJECT-TYPE    
  INTEGER fit(1), fat(2), fatCloud(3)  

hwWlanSingleApUpdateTable 1.3.6.1.4.1.2011.6.139.14.3.4
This table is used to specify the mapping relationship between AP IDs and upgrade file names and to perform upgrade based on specified APs.
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanSingleApUpdateEntry

hwWlanSingleApUpdateEntry 1.3.6.1.4.1.2011.6.139.14.3.4.1
The index of this table is hwWlanApMac.
OBJECT-TYPE    
  HwWlanSingleApUpdateEntry  

hwWlanSingleApUpdateAdminOper 1.3.6.1.4.1.2011.6.139.14.3.4.1.1
This object indicates a single AP upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the AP is restarted cancel(3): The upgrade is canceled.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwWlanSingleApUpdatePercent 1.3.6.1.4.1.2011.6.139.14.3.4.1.2
This object indicates the single AP upgrade progress.
OBJECT-TYPE    
  Integer32  

hwWlanSingleApUpdateFilename 1.3.6.1.4.1.2011.6.139.14.3.4.1.3
This object indicates the name of the upgrade file matching the type of the AP to be upgraded.
OBJECT-TYPE    
  STRING  

hwWlanApTypeGroupUpdateTable 1.3.6.1.4.1.2011.6.139.14.3.5
This table is used to map AP types and AP groups to upgrade file names. It allows you to upgrade APs in batches based on AP types and AP groups.
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApTypeGroupUpdateEntry

hwWlanApTypeGroupUpdateEntry 1.3.6.1.4.1.2011.6.139.14.3.5.1
The indexes of this table are hwWlanApType and hwAPGroupName.
OBJECT-TYPE    
  HwWlanApTypeGroupUpdateEntry  

hwWlanApTypeGroupUpdateFilename 1.3.6.1.4.1.2011.6.139.14.3.5.1.1
This object indicates the name of the upgrade file matching the type of the APs to be upgraded.
OBJECT-TYPE    
  STRING  

hwWlanApTypeGroupUpdateAdminOper 1.3.6.1.4.1.2011.6.139.14.3.5.1.2
This object indicates an upgrade operation start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwWlanApTypeGroupUpdatePercent 1.3.6.1.4.1.2011.6.139.14.3.5.1.3
This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs of the same type.
OBJECT-TYPE    
  Integer32  

hwWlanApTypeGroupUpdateRowStatus 1.3.6.1.4.1.2011.6.139.14.3.5.1.4
This object indicates the row status of this table.
OBJECT-TYPE    
  RowStatus  

hwWlanApUpdateScheduleTaskTable 1.3.6.1.4.1.2011.6.139.14.3.6
This table is used to create, query, and delete scheduled upgrade tasks.
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApUpdateScheduleTaskEntry

hwWlanApUpdateScheduleTaskEntry 1.3.6.1.4.1.2011.6.139.14.3.6.1
The indexes of this table is hwWlanApUpdateScheduleTaskId.
OBJECT-TYPE    
  HwWlanApUpdateScheduleTaskEntry  

hwWlanApUpdateScheduleTaskId 1.3.6.1.4.1.2011.6.139.14.3.6.1.1
This object indicates the ID of the task.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateScheduleTaskStartTime 1.3.6.1.4.1.2011.6.139.14.3.6.1.2
This object indicates the starting time that is in the format of 'YYYY/MM/DD,HH:MM'.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateScheduleTaskStopTime 1.3.6.1.4.1.2011.6.139.14.3.6.1.3
This object indicates the stopping time that is in the format of 'YYYY/MM/DD,HH:MM'.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateScheduleTaskApType 1.3.6.1.4.1.2011.6.139.14.3.6.1.4
This object indicates the type of the APs to be upgraded.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateScheduleTaskApGroup 1.3.6.1.4.1.2011.6.139.14.3.6.1.5
This object indicates the group of the APs to be upgraded.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateScheduleTaskState 1.3.6.1.4.1.2011.6.139.14.3.6.1.6
This object indicates the state of the task.
OBJECT-TYPE    
  INTEGER idle(1), running(2), waitting(3), done(4), overtime(5), dead(6)  

hwWlanApUpdateScheduleTaskRowStatus 1.3.6.1.4.1.2011.6.139.14.3.6.1.7
This object indicates the row status.
OBJECT-TYPE    
  RowStatus  

hwWlanApUpdateOperEntry 1.3.6.1.4.1.2011.6.139.14.3.7
OBJECT IDENTIFIER    

hwWlanApUpdateOperAdminOper 1.3.6.1.4.1.2011.6.139.14.3.7.1
This object indicates that the APs begin to upgrade start(1): The AP upgrade starts reset(2): After the upgrade is complete, the APs are restarted cancel(3): The upgrade is canceled.
OBJECT-TYPE    
  INTEGER start(1), reset(2), cancel(3)  

hwWlanApUpdateOperApType 1.3.6.1.4.1.2011.6.139.14.3.7.2
This object indicates the type of the APs to be upgraded.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateOperApGroup 1.3.6.1.4.1.2011.6.139.14.3.7.3
This object indicates the group of the APs to be upgraded.
OBJECT-TYPE    
  STRING  

hwWlanApUpdateOperPercent 1.3.6.1.4.1.2011.6.139.14.3.7.4
This object indicates the AP upgrade progress, namely, the percentage of upgraded APs to all APs.
OBJECT-TYPE    
  Integer32  

hwWlanApUpdateConformance 1.3.6.1.4.1.2011.6.139.14.4
OBJECT IDENTIFIER    

hwWlanApUpdateCompliances 1.3.6.1.4.1.2011.6.139.14.4.1
OBJECT IDENTIFIER    

hwWlanApUpdateCompliance 1.3.6.1.4.1.2011.6.139.14.4.1.1
Description.
MODULE-COMPLIANCE    

hwWlanApUpdateObjectGroups 1.3.6.1.4.1.2011.6.139.14.4.2
OBJECT IDENTIFIER    

hwWlanApUpdateTrapGroup 1.3.6.1.4.1.2011.6.139.14.4.2.1
Description.
NOTIFICATION-GROUP    

hwWlanApUpdateTrapObjectsGroup 1.3.6.1.4.1.2011.6.139.14.4.2.2
Description.
OBJECT-GROUP    

hwWlanApUpdateObjectsGroup 1.3.6.1.4.1.2011.6.139.14.4.2.3
Description.
OBJECT-GROUP