HUAWEI-VPN-DIAGNOSTICS-MIB

File: HUAWEI-VPN-DIAGNOSTICS-MIB.mib (48857 bytes)

Imported modules

HUAWEI-MIB HUAWEI-VPLS-EXT-MIB INET-ADDRESS-MIB
P-BRIDGE-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

hwDatacomm HWL2VpnVcEncapsType InetAddressType
InetAddress EnabledStatus OBJECT-GROUP
MODULE-COMPLIANCE mib-2 IpAddress
Integer32 Unsigned32 OBJECT-TYPE
MODULE-IDENTITY MacAddress RowStatus
DisplayString TEXTUAL-CONVENTION

Defined Types

MacOpType  
Select test type
TEXTUAL-CONVENTION    
  INTEGER populate(1), purge(2)  

HwOamMacOperEntry  
SEQUENCE    
  hwOamMacOperIndex Integer32
  hwOamMacOperAddress MacAddress
  hwOamMacOperVsiName OCTET STRING
  hwOamMacOperType MacOpType
  hwOamMacOperRegister EnabledStatus
  hwOamMacOperFlood EnabledStatus
  hwOamMacOperNum Integer32
  hwOamMacOperRowStatus RowStatus

HwOamMacListEntry  
SEQUENCE    
  hwOamMacListIndex Integer32
  hwOamMacListAddress MacAddress

HwOamMacDisplayEntry  
SEQUENCE    
  hwOamMacDisplayIndex Integer32
  hwOamMacDisplayAddress MacAddress
  hwOamMacDisplayType MacOpType
  hwOamMacDisplayVsiName OCTET STRING
  hwOamMacDisplayAgeTime Integer32
  hwOamMacDisplayLsrId IpAddress

HwVpnCfgPingEntry  
SEQUENCE    
  hwVpnCfgPingIndex Integer32
  hwVpnCfgPingPeerIpType InetAddressType
  hwVpnCfgPingPeerIp InetAddress
  hwVpnCfgPingVpnIdType INTEGER
  hwVpnCfgPingVpnId OCTET STRING
  hwVpnCfgPingPwId Integer32
  hwVpnCfgPingTunnelUsed INTEGER
  hwVpnCfgPingOperation EnabledStatus
  hwVpnCfgPingResultDetail INTEGER
  hwVpnCfgPingRowStatus RowStatus
  hwVpnCfgPingSecondary INTEGER
  hwVpnCfgPingIfName DisplayString
  hwVpnCfgPingPwIdNew Unsigned32

HwVpnCfgPingResultEntry  
SEQUENCE    
  hwVpnCfgPingResultLocation INTEGER
  hwVpnCfgPingResultVpnIdType INTEGER
  hwVpnCfgPingResultVpnId DisplayString
  hwVpnCfgPingResultDesc DisplayString
  hwVpnCfgPingResultVpnAdminStatus INTEGER
  hwVpnCfgPingResultOperStatus INTEGER
  hwVpnCfgPingResultMtu Integer32
  hwVpnCfgPingResultCeCount Integer32
  hwVpnCfgPingResultActualIpType InetAddressType
  hwVpnCfgPingResultActualIp InetAddress
  hwVpnCfgPingResultPeerIpType InetAddressType
  hwVpnCfgPingResultPeerIp InetAddress
  hwVpnCfgPingResultPwId Integer32
  hwVpnCfgPingResultPeType INTEGER
  hwVpnCfgPingResultVcType HWL2VpnVcEncapsType
  hwVpnCfgPingResultLabelIn Integer32
  hwVpnCfgPingResultLableOut Integer32
  hwVpnCfgPingResultControlWord INTEGER
  hwVpnCfgPingResultPriOrSec INTEGER
  hwVpnCfgPingResultVplsID OCTET STRING
  hwVpnCfgPingResultRD OCTET STRING
  hwVpnCfgPingResultPwIdNew Unsigned32

HwVpnCfgPingResultIRtEntry  
SEQUENCE    
  hwVpnCfgPingResultIRtIndex Integer32
  hwVpnCfgPingResultIRt OCTET STRING

HwVpnCfgPingResultERtEntry  
SEQUENCE    
  hwVpnCfgPingResultERtIndex Integer32
  hwVpnCfgPingResultERt OCTET STRING

Defined Values

vpndiagnostics 1.3.6.1.4.1.2011.5.25.172
HUAWEI service quality detect funcion.
MODULE-IDENTITY    

macoper 1.3.6.1.4.1.2011.5.25.172.1
OBJECT IDENTIFIER    

populateBase 1.3.6.1.4.1.2011.5.25.172.1.1
OBJECT IDENTIFIER    

hwOamMacPopulateCount 1.3.6.1.4.1.2011.5.25.172.1.1.1
Received populate packets in current device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwOamMacPurgeCount 1.3.6.1.4.1.2011.5.25.172.1.1.2
Received purge packets in current device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwOamMacPurgeRegCount 1.3.6.1.4.1.2011.5.25.172.1.1.3
Received purge(register) packets in current device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwOamMacCountReset 1.3.6.1.4.1.2011.5.25.172.1.1.4
Reset the count of hwOamMacPopulateCount and hwOamMacPurgeCount, the value 1 means reset hwOamMacPopulateCount,the value is 2 means reset hwOamMacPurgeCount, the value is 3 means reset hwOamMacPurgeRegCount ,the value is 4 means reset hwOamMacPopulateCount and hwOamMacPurgeCount,hwOamMacPurgeRegCount , When read, it always returns value 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER populatereset(1), purgereset(2), purgeregreset(3), allreset(4)  

hwOamMacSwitch 1.3.6.1.4.1.2011.5.25.172.1.1.5
Indicates the switch of enabling MAC populate,if the value is 1, enable; if the value is 2, disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwOamMacEntryNum 1.3.6.1.4.1.2011.5.25.172.1.1.6
The entry number of hwOamMacDisplayTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwOamMacOperTable 1.3.6.1.4.1.2011.5.25.172.1.2
A table which to be populate or purge operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOamMacOperEntry

hwOamMacOperEntry 1.3.6.1.4.1.2011.5.25.172.1.2.1
Entries of hwOamMacOperTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOamMacOperEntry  

hwOamMacOperIndex 1.3.6.1.4.1.2011.5.25.172.1.2.1.1
The index of hwOamMacOperIndex,it is always 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1  

hwOamMacOperAddress 1.3.6.1.4.1.2011.5.25.172.1.2.1.2
The MAC that to be populated or purged.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwOamMacOperVsiName 1.3.6.1.4.1.2011.5.25.172.1.2.1.3
The name or other identifier referring to the VSI which is correlative to the hwOamMac.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwOamMacOperType 1.3.6.1.4.1.2011.5.25.172.1.2.1.4
The operate type,1 means populate,2 means purge.
Status: current Access: read-create
OBJECT-TYPE    
  MacOpType  

hwOamMacOperRegister 1.3.6.1.4.1.2011.5.25.172.1.2.1.5
while purge a OAM MAC,register it to be a reserved MAC . 1 means register, 2 means not register. Defaut is 2.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwOamMacOperFlood 1.3.6.1.4.1.2011.5.25.172.1.2.1.6
Broadcast the packet or not. 1 means broadcast, 2 means don`t broadcast.Defaut is 2.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwOamMacOperNum 1.3.6.1.4.1.2011.5.25.172.1.2.1.7
The number of packets which want to be sent.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..5  

hwOamMacOperRowStatus 1.3.6.1.4.1.2011.5.25.172.1.2.1.8
The operating state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwOamMacListTable 1.3.6.1.4.1.2011.5.25.172.1.3
A table which displays the OAM MAC applied at huawei.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOamMacListEntry

hwOamMacListEntry 1.3.6.1.4.1.2011.5.25.172.1.3.1
Display the OAM MAC applied at huawei.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOamMacListEntry  

hwOamMacListIndex 1.3.6.1.4.1.2011.5.25.172.1.3.1.1
The index of hwOamMacListIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..10  

hwOamMacListAddress 1.3.6.1.4.1.2011.5.25.172.1.3.1.2
The OAM MAC applied at huawei.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwOamMacDisplayTable 1.3.6.1.4.1.2011.5.25.172.1.4
A table which displays the result of populate or purge operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOamMacDisplayEntry

hwOamMacDisplayEntry 1.3.6.1.4.1.2011.5.25.172.1.4.1
Entries of hwOamMacDisplayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOamMacDisplayEntry  

hwOamMacDisplayIndex 1.3.6.1.4.1.2011.5.25.172.1.4.1.1
The index of hwOamMacDisplayEntry, the value range is from 1 to 100.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..100  

hwOamMacDisplayAddress 1.3.6.1.4.1.2011.5.25.172.1.4.1.2
The OAM MAC that had been populated or purged.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwOamMacDisplayType 1.3.6.1.4.1.2011.5.25.172.1.4.1.3
The OAM MAC type, 1 means populate, 2 means purge.
Status: current Access: read-only
OBJECT-TYPE    
  MacOpType  

hwOamMacDisplayVsiName 1.3.6.1.4.1.2011.5.25.172.1.4.1.4
The name or other identifier referring to the VSI which is correlative to the hwOamMac.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwOamMacDisplayAgeTime 1.3.6.1.4.1.2011.5.25.172.1.4.1.5
The age time of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwOamMacDisplayLsrId 1.3.6.1.4.1.2011.5.25.172.1.4.1.6
The LSR-ID of the sender.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

macoperConformance 1.3.6.1.4.1.2011.5.25.172.1.5
OBJECT IDENTIFIER    

hwOamMacGroup 1.3.6.1.4.1.2011.5.25.172.1.5.1
OBJECT IDENTIFIER    

macoperCompliances 1.3.6.1.4.1.2011.5.25.172.1.5.2
OBJECT IDENTIFIER    

macoperCompliance 1.3.6.1.4.1.2011.5.25.172.1.5.2.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwPopuBaseGroup 1.3.6.1.4.1.2011.5.25.172.1.5.1.1
hwPopuBaseGroup.
Status: current Access: read-only
OBJECT-GROUP    

hwOamMacOperGroup 1.3.6.1.4.1.2011.5.25.172.1.5.1.2
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
Status: current Access: read-only
OBJECT-GROUP    

hwOamMacListGroup 1.3.6.1.4.1.2011.5.25.172.1.5.1.3
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
Status: current Access: read-only
OBJECT-GROUP    

hwOamMacDisplayGroup 1.3.6.1.4.1.2011.5.25.172.1.5.1.4
A collection of objects indicating information of IP address of interface, contain Ip address, Ip address mask and Ip address acquiring method.
Status: current Access: read-only
OBJECT-GROUP    

hwVpnCfgPing 1.3.6.1.4.1.2011.5.25.172.2
OBJECT IDENTIFIER    

hwVpnCfgPingTable 1.3.6.1.4.1.2011.5.25.172.2.1
hwVpnCfgPingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVpnCfgPingEntry

hwVpnCfgPingEntry 1.3.6.1.4.1.2011.5.25.172.2.1.1
This object indicates that the index of this table is hwVpnCfgPingIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVpnCfgPingEntry  

hwVpnCfgPingIndex 1.3.6.1.4.1.2011.5.25.172.2.1.1.1
This object indicates the index of an operation instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hwVpnCfgPingPeerIpType 1.3.6.1.4.1.2011.5.25.172.2.1.1.2
This object indicates the type of the peer IP address. It is used to identify the value type of hwVpnCfgPingPeerIp, which can be IPv4 or IPv6.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hwVpnCfgPingPeerIp 1.3.6.1.4.1.2011.5.25.172.2.1.1.3
This object indicates the peer IP address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

hwVpnCfgPingVpnIdType 1.3.6.1.4.1.2011.5.25.172.2.1.1.4
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)  

hwVpnCfgPingVpnId 1.3.6.1.4.1.2011.5.25.172.2.1.1.5
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hwVpnCfgPingPwId 1.3.6.1.4.1.2011.5.25.172.2.1.1.6
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingTunnelUsed 1.3.6.1.4.1.2011.5.25.172.2.1.1.7
This object indicates the mode of forwarding request packets or response packets (such as tunnel forwarding).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), localOnly(2), remoteOnly(3), localAndRemote(4)  

hwVpnCfgPingOperation 1.3.6.1.4.1.2011.5.25.172.2.1.1.8
This object indicates two values: enable(1) and disable(2). enable(1) indicates that the operation instance is started; disable(2) indicates that the operation instance is stopped.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwVpnCfgPingResultDetail 1.3.6.1.4.1.2011.5.25.172.2.1.1.9
This object indicates the result detail of ping operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER requestSentReplyRecieved(1), requestSentReplyTimeout(2), requestFailedReplyFailed(3), noResult(255)  

hwVpnCfgPingRowStatus 1.3.6.1.4.1.2011.5.25.172.2.1.1.10
This object indicates the row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwVpnCfgPingSecondary 1.3.6.1.4.1.2011.5.25.172.2.1.1.11
This object indicates the local secondary PW.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER primary(0), secondary(1), unknown(255)  

hwVpnCfgPingIfName 1.3.6.1.4.1.2011.5.25.172.2.1.1.12
This object indicates the name of the AC interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hwVpnCfgPingPwIdNew 1.3.6.1.4.1.2011.5.25.172.2.1.1.13
This object indicates PW-ID. This value is set for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0. Because hwVpnCfgPingPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object ranging from 0 to 4294967295 is therefore added.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwVpnCfgPingResultTable 1.3.6.1.4.1.2011.5.25.172.2.2
hwVpnCfgPingResultTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVpnCfgPingResultEntry

hwVpnCfgPingResultEntry 1.3.6.1.4.1.2011.5.25.172.2.2.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVpnCfgPingResultEntry  

hwVpnCfgPingResultLocation 1.3.6.1.4.1.2011.5.25.172.2.2.1.1
This object indicates two values: local(1) and remote(2). local(1) indicates configurations of the local end displayed in the probe result. remote(2) indicates configurations of the peer end displayed in the probe result.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hwVpnCfgPingResultVpnIdType 1.3.6.1.4.1.2011.5.25.172.2.2.1.2
This object indicates the VPN ID type, that is, the type of hwVPNCFGPingVPNID. The VPN ID type can be VPLS, L3VPN, PWE3, or Martini VLL.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)  

hwVpnCfgPingResultVpnId 1.3.6.1.4.1.2011.5.25.172.2.2.1.3
This object indicates the VPN ID, expressed in a character string. The VPN ID is VSI-Name for VPLS, VPN-Instance for L3VPN, and invalid for PWE3 and Martini VLL.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwVpnCfgPingResultDesc 1.3.6.1.4.1.2011.5.25.172.2.2.1.4
This object indicates the description of the VPN.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hwVpnCfgPingResultVpnAdminStatus 1.3.6.1.4.1.2011.5.25.172.2.2.1.5
This object indicates the management status of the VPN: up(1), down(2), and unknown(255).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(255)  

hwVpnCfgPingResultOperStatus 1.3.6.1.4.1.2011.5.25.172.2.2.1.6
This object indicates the operation status of the VPN: up(1), down(2), and unknown(255).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(255)  

hwVpnCfgPingResultMtu 1.3.6.1.4.1.2011.5.25.172.2.2.1.7
This object indicates the MTU value. The object represents the MTU value of the AC interface when the VPN type is PWE3 or Martini VLL, represents the MTU value of the VSI when the VPN type is VPLS. If the value of the object cannot be obtained, the object value is considered as 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultCeCount 1.3.6.1.4.1.2011.5.25.172.2.2.1.8
This object indicates the number of CEs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultActualIpType 1.3.6.1.4.1.2011.5.25.172.2.2.1.9
This object indicates the type of the IP address of the PW on the local PE. It is used to identify the value type of hwVpnCfgPingResultActualIp.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

hwVpnCfgPingResultActualIp 1.3.6.1.4.1.2011.5.25.172.2.2.1.10
This object indicates the IP address of the PW on the local PE.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

hwVpnCfgPingResultPeerIpType 1.3.6.1.4.1.2011.5.25.172.2.2.1.11
This object indicates the type of the IP address of the PW on the peer PE. It is used to identify the value type of hwVpnCfgPingResultPeerIP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

hwVpnCfgPingResultPeerIp 1.3.6.1.4.1.2011.5.25.172.2.2.1.12
This object indicates the IP address of the PW on the peer PE.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

hwVpnCfgPingResultPwId 1.3.6.1.4.1.2011.5.25.172.2.2.1.13
This object indicates PW-ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultPeType 1.3.6.1.4.1.2011.5.25.172.2.2.1.14
This object indicates the type of the PE (Whether the PE is an SPE.)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER upe(1), spe(2), unknown(255)  

hwVpnCfgPingResultVcType 1.3.6.1.4.1.2011.5.25.172.2.2.1.15
This object indicates the VC type.
Status: current Access: read-only
OBJECT-TYPE    
  HWL2VpnVcEncapsType  

hwVpnCfgPingResultLabelIn 1.3.6.1.4.1.2011.5.25.172.2.2.1.16
This object indicates the incoming label of the interface at the PW side.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultLableOut 1.3.6.1.4.1.2011.5.25.172.2.2.1.17
This object indicates the outgoing label of the interface at the PW side.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultControlWord 1.3.6.1.4.1.2011.5.25.172.2.2.1.18
This object indicates whether the keyword control-word is configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1), unknown(255)  

hwVpnCfgPingResultPriOrSec 1.3.6.1.4.1.2011.5.25.172.2.2.1.19
This object indicates whether the local PW is a primary PW or a secondary PW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1), unknown(255)  

hwVpnCfgPingResultVplsID 1.3.6.1.4.1.2011.5.25.172.2.2.1.20
This object indicates the virtual private LAN service id.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwVpnCfgPingResultRD 1.3.6.1.4.1.2011.5.25.172.2.2.1.21
This object indicates the route distinguisher.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwVpnCfgPingResultPwIdNew 1.3.6.1.4.1.2011.5.25.172.2.2.1.22
This object indicates PW-ID. Because hwVpnCfgPingResultPwId ranges from -2147483647 to +2147483647, failing to cover the range from 2147483648 to 4294967295, this object ranging from 0 to 4294967295 is therefore added.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwVpnCfgPingConformance 1.3.6.1.4.1.2011.5.25.172.2.3
OBJECT IDENTIFIER    

hwVpnCfgPingGroups 1.3.6.1.4.1.2011.5.25.172.2.3.1
OBJECT IDENTIFIER    

hwVpnCfgPingCompliances 1.3.6.1.4.1.2011.5.25.172.2.3.2
OBJECT IDENTIFIER    

hwVpnCfgPingCompliance 1.3.6.1.4.1.2011.5.25.172.2.3.2.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwVpnCfgPingGroup 1.3.6.1.4.1.2011.5.25.172.2.3.1.1
hwVpnCfgPingGroup.
Status: current Access: read-only
OBJECT-GROUP    

hwVpnCfgPingResultGroup 1.3.6.1.4.1.2011.5.25.172.2.3.1.2
hwVpnCfgPingResultGroup.
Status: current Access: read-only
OBJECT-GROUP    

hwVpnCfgPingResultIRtGroup 1.3.6.1.4.1.2011.5.25.172.2.3.1.3
hwVpnCfgPingResultIRtGroup.
Status: current Access: read-only
OBJECT-GROUP    

hwVpnCfgPingResultERtGroup 1.3.6.1.4.1.2011.5.25.172.2.3.1.4
hwVpnCfgPingResultERtGroup.
Status: current Access: read-only
OBJECT-GROUP    

hwVpnCfgPingResultIRtTable 1.3.6.1.4.1.2011.5.25.172.2.4
hwVpnCfgPingResultIRtTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVpnCfgPingResultIRtEntry

hwVpnCfgPingResultIRtEntry 1.3.6.1.4.1.2011.5.25.172.2.4.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVpnCfgPingResultIRtEntry  

hwVpnCfgPingResultIRtIndex 1.3.6.1.4.1.2011.5.25.172.2.4.1.1
This object indicates the index of an import vpn target.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultIRt 1.3.6.1.4.1.2011.5.25.172.2.4.1.2
This object indicates the import vpn target.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwVpnCfgPingResultERtTable 1.3.6.1.4.1.2011.5.25.172.2.5
hwVpnCfgPingResultERtTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVpnCfgPingResultERtEntry

hwVpnCfgPingResultERtEntry 1.3.6.1.4.1.2011.5.25.172.2.5.1
This object indicates that indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVpnCfgPingResultERtEntry  

hwVpnCfgPingResultERtIndex 1.3.6.1.4.1.2011.5.25.172.2.5.1.1
This object indicates the index of an export vpn target..
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwVpnCfgPingResultERt 1.3.6.1.4.1.2011.5.25.172.2.5.1.2
This object indicates the export vpn target.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING