HUAWEI-VO-IF-MIB

File: HUAWEI-VO-IF-MIB.mib (8861 bytes)

Imported modules

SNMPv2-SMI HUAWEI-3COM-OID-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY voice

Defined Types

HWVoIfConfigEntry  
SEQUENCE    
  hwVoIfConfigPortNumber INTEGER
  hwVoIfConfigGroupNumber INTEGER
  hwVoIfConfigCngOn INTEGER
  hwVoIfConfigNonLinearProcessSwitch INTEGER
  hwVoIfConfigMusicThreshold INTEGER
  hwVoIfConfigInputGain INTEGER
  hwVoIfConfigOutputGain INTEGER
  hwVoIfConfigEchoCancellationSwitch INTEGER
  hwVoIfConfigEchoCancellationCoverage INTEGER
  hwVoIfConfigEchoCancellationDelay INTEGER
  hwVoIfConfigPlarNumber STRING
  hwVoIfConfigRegionalTone STRING
  hwVoIfConfigDescription STRING
  hwVoIfConfigStatus INTEGER
  hwVoIfConfigDtmfThreshold INTEGER
  hwVoIfConfigCallingNumSubstRule INTEGER
  hwVoIfConfigCalledNumSubstRule INTEGER

Defined Values

hwVoiceIfMIB 1.3.6.1.4.1.2011.5.25.1.2
MODULE-IDENTITY    

hwVoIfObjects 1.3.6.1.4.1.2011.5.25.1.2.1
OBJECT IDENTIFIER    

hwVoIfConfigTable 1.3.6.1.4.1.2011.5.25.1.2.1.1
The voice interface general configuration table contains information about configuration parameters for both analog voice interface and digital voice interface.
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoIfConfigEntry

hwVoIfConfigEntry 1.3.6.1.4.1.2011.5.25.1.2.1.1.1
An entry in the voice interface general configuration table. The entry is automatically created when a voice interface hardware is found.
OBJECT-TYPE    
  HWVoIfConfigEntry  

hwVoIfConfigPortNumber 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.1
Index of voice interface general config table. It identify the number of the voice port.
OBJECT-TYPE    
  INTEGER  

hwVoIfConfigGroupNumber 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.2
Index of voice interface general config table. It identify the number of the ds0 or pri group. If it is used in an analog interface, the value is 255.
OBJECT-TYPE    
  INTEGER  

hwVoIfConfigCngOn 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.3
This object expresses whether or not the silence gaps should be filled with background noise. The default value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoIfConfigNonLinearProcessSwitch 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.4
This object expresses the nonlinear processing is enable or disable for the voice interface. The default value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoIfConfigMusicThreshold 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.5
This object states the music threshold of the voice interface. The default value is -38 dBm.
OBJECT-TYPE    
  INTEGER -70..-30  

hwVoIfConfigInputGain 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.6
This object states the amount of gain added to the receive side of the voice interface. The default value is 0 decibel.
OBJECT-TYPE    
  INTEGER -14..14  

hwVoIfConfigOutputGain 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.7
This object states the amount of gain added to the send side of the voice interface. The default value is 0 decibel.
OBJECT-TYPE    
  INTEGER -14..14  

hwVoIfConfigEchoCancellationSwitch 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.8
This object expresses the echo cancellation is enable or disable for the voice interface. The default value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoIfConfigEchoCancellationCoverage 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.9
This object states the milliseconds of echo cancellation coverage for the voice interface. This object can only be used when hwVoIfConfigEchoCancellationSwitch is enable. The default value is echoCancelCoverage16ms.
OBJECT-TYPE    
  INTEGER echoCancelCoverage16ms(1), echoCancelCoverage24ms(2), echoCancelCoverage32ms(3)  

hwVoIfConfigEchoCancellationDelay 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.10
This object states the delay of the echo cancellation for the voice interface. This object can only be used when hwVoIfConfigEchoCancellationSwitch is enable. The default value is 32 milliseconds.
OBJECT-TYPE    
  INTEGER 0..64  

hwVoIfConfigPlarNumber 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.11
This object states the E.164 phone number for connection plar mode.
OBJECT-TYPE    
  STRING Size(0..31)  

hwVoIfConfigRegionalTone 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.12
This object uses 2 letter country code specify voice parameters of different countrys.
OBJECT-TYPE    
  STRING Size(02)  

hwVoIfConfigDescription 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.13
This object contains the description of voice interface
OBJECT-TYPE    
  STRING Size(0..255)  

hwVoIfConfigStatus 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.14
This object expresses the status of voice interface.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hwVoIfConfigDtmfThreshold 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.15
This object Set the level threshold of recieve DTMF.
OBJECT-TYPE    
  INTEGER sensitivity(1), insensitivty(2)  

hwVoIfConfigCallingNumSubstRule 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.16
This object specifies a number-substitute rule that apply calling numbor this subscriber line. It is valid if its value is between 1 and 21474836This subscriber line doesn't apply any number-substitute rule if its value is 0.
OBJECT-TYPE    
  INTEGER 0..2147483647  

hwVoIfConfigCalledNumSubstRule 1.3.6.1.4.1.2011.5.25.1.2.1.1.1.17
This object specifies a number-substitute rule that apply called number for this subscriber line. It is valid if its value is between 1 and 2147483647. This subscriber line doesn't apply any number-substitute rule if its value is 0.
OBJECT-TYPE    
  INTEGER 0..2147483647