HUAWEI-TUNNEL-TE-MIB

File: HUAWEI-TUNNEL-TE-MIB.mib (76248 bytes)

Imported modules

HUAWEI-MIB	IF-MIB	MPLS-LSR-STD-MIB
MPLS-TC-STD-MIB	SNMP-FRAMEWORK-MIB	SNMPv2-CONF
SNMPv2-SMI	SNMPv2-TC

Imported symbols

hwDatacomm	InterfaceIndex	MplsIndexType
MplsTunnelIndex	MplsTunnelInstanceIndex	MplsExtendedTunnelId
SnmpAdminString	OBJECT-GROUP	NOTIFICATION-GROUP
Integer32	Unsigned32	Counter32
Counter64	OBJECT-TYPE	MODULE-IDENTITY
NOTIFICATION-TYPE	TruthValue	TimeStamp
RowStatus

Defined Types

HwTunnelDiffServEntry
SEQUENCE
	hwTunnelDiffServIndex	InterfaceIndex
	hwTunnelDiffServMode	INTEGER
	hwTunnelDiffServServiceClass	INTEGER
	hwTunnelDiffServColor	INTEGER
	hwTunnelTeFlowQueue	OCTET STRING

HwTunnelTeVsiEntry
SEQUENCE
	hwTunnelTeVsiIndex	InterfaceIndex
	hwTunnelTeVsiName	OCTET STRING
	hwTunnelTeVsiCir	Integer32
	hwTunnelTeVsiPir	Integer32
	hwTunnelTeVsiFlowQueue	OCTET STRING

HwTunnelTeVllEntry
SEQUENCE
	hwTunnelTeVllIndex	InterfaceIndex
	hwTunnelTeVllInterfaceName	OCTET STRING
	hwTunnelTeVllCir	Integer32
	hwTunnelTeVllPir	Integer32
	hwTunnelTeVllFlowQueue	OCTET STRING

HwTunnelTeL3vpnEntry
SEQUENCE
	hwTunnelTeL3vpnIndex	InterfaceIndex
	hwTunnelTeL3vpnName	OCTET STRING
	hwTunnelTeL3vpnCir	Integer32
	hwTunnelTeL3vpnPir	Integer32
	hwTunnelTeL3vpnFlowQueue	OCTET STRING

HwTunnelTeStatisticsEntry
SEQUENCE
	hwTunnelTeStatisticsIfIndex	InterfaceIndex
	hwTunnelTeUpDownStatistics	Unsigned32
	hwTunnTeCounterDiscontinuityTime	TimeStamp

HwCtTemplateEntry
SEQUENCE
	hwCtTemplateIndex	Integer32
	hwCtTemplateName	OCTET STRING
	hwCtTemplateCt0	Unsigned32
	hwCtTemplateCt1	Unsigned32
	hwCtTemplateCt2	Unsigned32
	hwCtTemplateCt3	Unsigned32
	hwCtTemplateCt4	Unsigned32
	hwCtTemplateCt5	Unsigned32
	hwCtTemplateCt6	Unsigned32
	hwCtTemplateCt7	Unsigned32
	hwCtTemplateCommit	INTEGER
	hwCtTemplateRowStatus	RowStatus

HwCtConfigTunnelCtEntry
SEQUENCE
	hwCtConfigTunnelCtIfIndex	InterfaceIndex
	hwCtConfigTunnelName	OCTET STRING
	hwCtConfigTunnelCommit	INTEGER
	hwCtConfigTemplateName	OCTET STRING
	hwCtConfigTunnelCt0Band	Unsigned32
	hwCtConfigTunnelCt1Band	Unsigned32
	hwCtConfigTunnelCt2Band	Unsigned32
	hwCtConfigTunnelCt3Band	Unsigned32
	hwCtConfigTunnelCt4Band	Unsigned32
	hwCtConfigTunnelCt5Band	Unsigned32
	hwCtConfigTunnelCt6Band	Unsigned32
	hwCtConfigTunnelCt7Band	Unsigned32

HwCtStatisticsEntry
SEQUENCE
	hwCtStatisticsIfIndex	InterfaceIndex
	hwCtStatisticsTunnelName	OCTET STRING
	hwCtStatisticsCt0OutByteRate	Counter64
	hwCtStatisticsCt0OutPktRate	Counter64
	hwCtStatisticsCt0OutPkt	Counter64
	hwCtStatisticsCt0OutPktByte	Counter64
	hwCtStatisticsCt0OutErrorPkt	Counter64
	hwCtStatisticsCt1OutByteRate	Counter64
	hwCtStatisticsCt1OutPktRate	Counter64
	hwCtStatisticsCt1OutPkt	Counter64
	hwCtStatisticsCt1OutPktByte	Counter64
	hwCtStatisticsCt1OutErrorPkt	Counter64
	hwCtStatisticsCt2OutByteRate	Counter64
	hwCtStatisticsCt2OutPktRate	Counter64
	hwCtStatisticsCt2OutPkt	Counter64
	hwCtStatisticsCt2OutPktByte	Counter64
	hwCtStatisticsCt2OutErrorPkt	Counter64
	hwCtStatisticsCt3OutByteRate	Counter64
	hwCtStatisticsCt3OutPktRate	Counter64
	hwCtStatisticsCt3OutPkt	Counter64
	hwCtStatisticsCt3OutPktByte	Counter64
	hwCtStatisticsCt3OutErrorPkt	Counter64
	hwCtStatisticsCt4OutByteRate	Counter64
	hwCtStatisticsCt4OutPktRate	Counter64
	hwCtStatisticsCt4OutPkt	Counter64
	hwCtStatisticsCt4OutPktByte	Counter64
	hwCtStatisticsCt4OutErrorPkt	Counter64
	hwCtStatisticsCt5OutByteRate	Counter64
	hwCtStatisticsCt5OutPktRate	Counter64
	hwCtStatisticsCt5OutPkt	Counter64
	hwCtStatisticsCt5OutPktByte	Counter64
	hwCtStatisticsCt5OutErrorPkt	Counter64
	hwCtStatisticsCt6OutByteRate	Counter64
	hwCtStatisticsCt6OutPktRate	Counter64
	hwCtStatisticsCt6OutPkt	Counter64
	hwCtStatisticsCt6OutPktByte	Counter64
	hwCtStatisticsCt6OutErrorPkt	Counter64
	hwCtStatisticsCt7OutByteRate	Counter64
	hwCtStatisticsCt7OutPktRate	Counter64
	hwCtStatisticsCt7OutPkt	Counter64
	hwCtStatisticsCt7OutPktByte	Counter64
	hwCtStatisticsCt7OutErrorPkt	Counter64

HwCtFlowTemplateEntry
SEQUENCE
	hwCtFlowTemplateID	Integer32
	hwCtFlowTemplateName	OCTET STRING
	hwCt0Cos	INTEGER
	hwCt0Scheduler	INTEGER
	hwCt0Valid	INTEGER
	hwCt1Cos	INTEGER
	hwCt1Scheduler	INTEGER
	hwCt1Valid	INTEGER
	hwCt2Cos	INTEGER
	hwCt2Scheduler	INTEGER
	hwCt2Valid	INTEGER
	hwCt3Cos	INTEGER
	hwCt3Scheduler	INTEGER
	hwCt3Valid	INTEGER
	hwCt4Cos	INTEGER
	hwCt4Scheduler	INTEGER
	hwCt4Valid	INTEGER
	hwCt5Cos	INTEGER
	hwCt5Scheduler	INTEGER
	hwCt5Valid	INTEGER
	hwCt6Cos	INTEGER
	hwCt6Scheduler	INTEGER
	hwCt6Valid	INTEGER
	hwCt7Cos	INTEGER
	hwCt7Scheduler	INTEGER
	hwCt7Valid	INTEGER
	hwCtFlowTemplateCommit	INTEGER
	hwCtFlowTemplateRowStatus	RowStatus

HwDsteInterfaceCfgEntry
SEQUENCE
	hwDsteIfIndex	InterfaceIndex
	hwAppliedCtFlowTemplateName	OCTET STRING
	hwCtBandWidthShareCfg	INTEGER

Defined Values

hwTunnelTeMib		1.3.6.1.4.1.2011.5.25.151
This MIB contains private managed object definitions for the binding information.
MODULE-IDENTITY

hwTunnelTeMibObject		1.3.6.1.4.1.2011.5.25.151.1
OBJECT IDENTIFIER

hwTunnelDiffServTable		1.3.6.1.4.1.2011.5.25.151.1.1
The table describes the different service mode of tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwTunnelDiffServEntry

hwTunnelDiffServEntry		1.3.6.1.4.1.2011.5.25.151.1.1.1
Interface different service mode attribute configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwTunnelDiffServEntry

hwTunnelDiffServIndex		1.3.6.1.4.1.2011.5.25.151.1.1.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the Tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwTunnelDiffServMode		1.3.6.1.4.1.2011.5.25.151.1.1.1.2
Different service mode of TE interface, default is uniform.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	pipe(1), uniform(2)

hwTunnelDiffServServiceClass		1.3.6.1.4.1.2011.5.25.151.1.1.1.3
PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8), invalidClass(255)

hwTunnelDiffServColor		1.3.6.1.4.1.2011.5.25.151.1.1.1.4
Remarked color of packet in the ingress PE, the value must be green,yellow,red.The default color is invalidColor(255).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	green(1), yellow(2), red(3), invalidColor(255)

hwTunnelTeFlowQueue		1.3.6.1.4.1.2011.5.25.151.1.1.1.5
Name of flow-queue template.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hwTunnelTeVsiTable		1.3.6.1.4.1.2011.5.25.151.1.2
The table describes the VPN binding of Tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwTunnelTeVsiEntry

hwTunnelTeVsiEntry		1.3.6.1.4.1.2011.5.25.151.1.2.1
The L2VPN VSI binding configuration of tunnel interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwTunnelTeVsiEntry

hwTunnelTeVsiIndex		1.3.6.1.4.1.2011.5.25.151.1.2.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwTunnelTeVsiName		1.3.6.1.4.1.2011.5.25.151.1.2.1.2
The name of VSI that the TE interface bind.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hwTunnelTeVsiCir		1.3.6.1.4.1.2011.5.25.151.1.2.1.3
The Committed Information Rate of the VSI.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeVsiPir		1.3.6.1.4.1.2011.5.25.151.1.2.1.4
The Peak Information Rate of the VSI.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeVsiFlowQueue		1.3.6.1.4.1.2011.5.25.151.1.2.1.5
Name of flow-queue template.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hwTunnelTeVllTable		1.3.6.1.4.1.2011.5.25.151.1.3
The table describes the VLL binding of tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwTunnelTeVllEntry

hwTunnelTeVllEntry		1.3.6.1.4.1.2011.5.25.151.1.3.1
The VLL binding configuration of tunnel interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwTunnelTeVllEntry

hwTunnelTeVllIndex		1.3.6.1.4.1.2011.5.25.151.1.3.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwTunnelTeVllInterfaceName		1.3.6.1.4.1.2011.5.25.151.1.3.1.2
The interface name of VLL binding.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hwTunnelTeVllCir		1.3.6.1.4.1.2011.5.25.151.1.3.1.3
The Committed Information Rate of the VLL.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeVllPir		1.3.6.1.4.1.2011.5.25.151.1.3.1.4
The Peak Information Rate of the VLL.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeVllFlowQueue		1.3.6.1.4.1.2011.5.25.151.1.3.1.5
Name of flow-queue template.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hwTunnelTeL3vpnTable		1.3.6.1.4.1.2011.5.25.151.1.4
The table describes the L3VPN binding of tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwTunnelTeL3vpnEntry

hwTunnelTeL3vpnEntry		1.3.6.1.4.1.2011.5.25.151.1.4.1
The L3VPN binding configuration of tunnel interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwTunnelTeL3vpnEntry

hwTunnelTeL3vpnIndex		1.3.6.1.4.1.2011.5.25.151.1.4.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwTunnelTeL3vpnName		1.3.6.1.4.1.2011.5.25.151.1.4.1.2
The name of VPN instance that the TE interface bind.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hwTunnelTeL3vpnCir		1.3.6.1.4.1.2011.5.25.151.1.4.1.3
The Committed Information Rate of the L3VPN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeL3vpnPir		1.3.6.1.4.1.2011.5.25.151.1.4.1.4
The Peak Information Rate of the L3VPN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	100..10000000

hwTunnelTeL3vpnFlowQueue		1.3.6.1.4.1.2011.5.25.151.1.4.1.5
Name of flow-queue template.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hwTunnelTeStatisticsTable		1.3.6.1.4.1.2011.5.25.151.1.5
The table describes the up/down state transition counts of the TE tunnel interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwTunnelTeStatisticsEntry

hwTunnelTeStatisticsEntry		1.3.6.1.4.1.2011.5.25.151.1.5.1
The up/down state transition counts of TE tunnel interface. The index of the table is hwTunnelTeStatisticsIfIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwTunnelTeStatisticsEntry

hwTunnelTeStatisticsIfIndex		1.3.6.1.4.1.2011.5.25.151.1.5.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwTunnelTeUpDownStatistics		1.3.6.1.4.1.2011.5.25.151.1.5.1.2
Describes the up/down transition counts of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwTunnTeCounterDiscontinuityTime		1.3.6.1.4.1.2011.5.25.151.1.5.1.3
The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

hwCtTemplateTable		1.3.6.1.4.1.2011.5.25.151.1.6
The table describes the CT template configuration on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCtTemplateEntry

hwCtTemplateEntry		1.3.6.1.4.1.2011.5.25.151.1.6.1
The CT template configuration on the device. The index of the table is hwCtTemplateIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCtTemplateEntry

hwCtTemplateIndex		1.3.6.1.4.1.2011.5.25.151.1.6.1.1
It uniquely identifies a set of CT templates. Managers should obtain new values for row creation in this table by reading hwCtTemplateIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..4096

hwCtTemplateName		1.3.6.1.4.1.2011.5.25.151.1.6.1.2
The CT template name.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..19)

hwCtTemplateCt0		1.3.6.1.4.1.2011.5.25.151.1.6.1.3
The CT0 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hwCtTemplateCt1		1.3.6.1.4.1.2011.5.25.151.1.6.1.4
The CT1 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt2		1.3.6.1.4.1.2011.5.25.151.1.6.1.5
The CT2 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt3		1.3.6.1.4.1.2011.5.25.151.1.6.1.6
The CT3 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt4		1.3.6.1.4.1.2011.5.25.151.1.6.1.7
The CT4 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt5		1.3.6.1.4.1.2011.5.25.151.1.6.1.8
The CT5 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt6		1.3.6.1.4.1.2011.5.25.151.1.6.1.9
The CT6 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCt7		1.3.6.1.4.1.2011.5.25.151.1.6.1.10
The CT7 bandwidth of the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtTemplateCommit		1.3.6.1.4.1.2011.5.25.151.1.6.1.11
The commit flag of the CT template,1 indicates commit,0 indicates not commit.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	notCommit(1), commit(2)

hwCtTemplateRowStatus		1.3.6.1.4.1.2011.5.25.151.1.6.1.12
This object is used to create and delete rows in the CT template.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwCtConfigTunnelCtTable		1.3.6.1.4.1.2011.5.25.151.1.7
The table describes the CT configuration in the TE tunnel interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCtConfigTunnelCtEntry

hwCtConfigTunnelCtEntry		1.3.6.1.4.1.2011.5.25.151.1.7.1
The table describes the CT configuration in the TE tunnel interface. The index of the table is hwCtConfigTunnelCtIfIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCtConfigTunnelCtEntry

hwCtConfigTunnelCtIfIndex		1.3.6.1.4.1.2011.5.25.151.1.7.1.1
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwCtConfigTunnelName		1.3.6.1.4.1.2011.5.25.151.1.7.1.2
The name of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwCtConfigTunnelCommit		1.3.6.1.4.1.2011.5.25.151.1.7.1.3
The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notCommit(1), commit(2)

hwCtConfigTemplateName		1.3.6.1.4.1.2011.5.25.151.1.7.1.4
The CT template name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

hwCtConfigTunnelCt0Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.5
The CT0 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt1Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.6
The CT1 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt2Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.7
The CT2 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt3Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.8
The CT3 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt4Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.9
The CT4 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt5Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.10
The CT5 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt6Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.11
The CT6 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtConfigTunnelCt7Band		1.3.6.1.4.1.2011.5.25.151.1.7.1.12
The CT7 bandwidth value of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..32000000

hwCtStatisticsTable		1.3.6.1.4.1.2011.5.25.151.1.8
The table describes flow statistics of the TE tunnel interface VPN configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCtStatisticsEntry

hwCtStatisticsEntry		1.3.6.1.4.1.2011.5.25.151.1.8.1
The table describes the statistics in the TE tunnel interface with CT configuration. The index of the table is hwCtStatisticsIfIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCtStatisticsEntry

hwCtStatisticsIfIndex		1.3.6.1.4.1.2011.5.25.151.1.8.1.1
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwCtStatisticsTunnelName		1.3.6.1.4.1.2011.5.25.151.1.8.1.2
The name of the TE tunnel interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwCtStatisticsCt0OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.3
It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt0OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.4
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt0OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.5
It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt0OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.6
It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt0OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.7
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt1OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.8
It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt1OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.9
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt1OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.10
It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt1OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.11
It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt1OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.12
It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt2OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.13
It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt2OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.14
It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt2OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.15
It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt2OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.16
It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt2OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.17
It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt3OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.18
The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt3OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.19
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt3OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.20
It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt3OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.21
It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt3OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.22
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt4OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.23
The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt4OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.24
It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt4OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.25
It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt4OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.26
It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt4OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.27
It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt5OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.28
The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt5OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.29
It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt5OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.30
It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt5OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.31
It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt5OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.32
It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt6OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.33
The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt6OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.34
It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt6OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.35
It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt6OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.36
It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt6OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.37
It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt7OutByteRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.38
The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt7OutPktRate		1.3.6.1.4.1.2011.5.25.151.1.8.1.39
It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt7OutPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.40
It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt7OutPktByte		1.3.6.1.4.1.2011.5.25.151.1.8.1.41
It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtStatisticsCt7OutErrorPkt		1.3.6.1.4.1.2011.5.25.151.1.8.1.42
It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hwCtFlowTemplateTable		1.3.6.1.4.1.2011.5.25.151.1.9
The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwCtFlowTemplateEntry

hwCtFlowTemplateEntry		1.3.6.1.4.1.2011.5.25.151.1.9.1
The table describes the CT-FLOW-Mapping template configuration on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwCtFlowTemplateEntry

hwCtFlowTemplateID		1.3.6.1.4.1.2011.5.25.151.1.9.1.1
The index of CT-FLOW templat.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..8

hwCtFlowTemplateName		1.3.6.1.4.1.2011.5.25.151.1.9.1.11
The name of CT-FLOW template.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..60)

hwCt0Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.12
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt0Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.13
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt0Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.14
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt1Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.15
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt1Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.16
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt1Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.17
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt2Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.18
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt2Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.19
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt2Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.20
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt3Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.21
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt3Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.22
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt3Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.23
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt4Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.24
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt4Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.25
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt4Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.26
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt5Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.27
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt5Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.28
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt5Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.29
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt6Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.30
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt6Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.31
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt6Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.32
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCt7Cos		1.3.6.1.4.1.2011.5.25.151.1.9.1.33
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8)

hwCt7Scheduler		1.3.6.1.4.1.2011.5.25.151.1.9.1.34
Scheduler name.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pq(1), wfq(2), lpq(3)

hwCt7Valid		1.3.6.1.4.1.2011.5.25.151.1.9.1.35
The state of CT-FLOW templat row.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

hwCtFlowTemplateCommit		1.3.6.1.4.1.2011.5.25.151.1.9.1.36
The state of CT-FLOW templat commit.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	commit(1), nocommit(2)

hwCtFlowTemplateRowStatus		1.3.6.1.4.1.2011.5.25.151.1.9.1.51
The state of CT-FLOW templat.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwDsteInterfaceCfgTable		1.3.6.1.4.1.2011.5.25.151.1.10
The DS-TE configuration at interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwDsteInterfaceCfgEntry

hwDsteInterfaceCfgEntry		1.3.6.1.4.1.2011.5.25.151.1.10.1
The DS-TE configuration at interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwDsteInterfaceCfgEntry

hwDsteIfIndex		1.3.6.1.4.1.2011.5.25.151.1.10.1.1
A unique value, greater than zero, for eachinterface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

hwAppliedCtFlowTemplateName		1.3.6.1.4.1.2011.5.25.151.1.10.1.11
The name of CT-FLOW template.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..60)

hwCtBandWidthShareCfg		1.3.6.1.4.1.2011.5.25.151.1.10.1.12
The Value of Ct BandWidth configuration for DS-TE. That must be in 'Share,UnShare'.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	share(1), unshare(2)

hwTunnelTeConformance		1.3.6.1.4.1.2011.5.25.151.3
OBJECT IDENTIFIER

hwTunnelTeGroups		1.3.6.1.4.1.2011.5.25.151.3.3
OBJECT IDENTIFIER

hwTunnelTeCompliances		1.3.6.1.4.1.2011.5.25.151.3.1
OBJECT IDENTIFIER

hwTunnelDiffServGroup		1.3.6.1.4.1.2011.5.25.151.3.3.1
Describes the different service mode of tunnel.
Status: current	Access: read-create
OBJECT-GROUP

hwTunnelTeVsiGroup		1.3.6.1.4.1.2011.5.25.151.3.3.2
Describes the VSI binding of tunnel.
Status: current	Access: read-create
OBJECT-GROUP

hwTunnelTeVllGroup		1.3.6.1.4.1.2011.5.25.151.3.3.3
Describes the VLL binding of tunnel.
Status: current	Access: read-create
OBJECT-GROUP

hwTunnelTeL3vpnGroup		1.3.6.1.4.1.2011.5.25.151.3.3.4
Describes the L3VPN binding of tunnel.
Status: current	Access: read-create
OBJECT-GROUP

hwTunnelTeStatisticsGroup		1.3.6.1.4.1.2011.5.25.151.3.3.5
Describes the up/down count of the TE tunnel.
Status: current	Access: read-create
OBJECT-GROUP

hwCtTemplateGroup		1.3.6.1.4.1.2011.5.25.151.3.3.6
Describes CT template.
Status: current	Access: read-create
OBJECT-GROUP

hwCtConfigCtGroup		1.3.6.1.4.1.2011.5.25.151.3.3.7
Describes the CT configuration of the TE tunnel interface.
Status: current	Access: read-create
OBJECT-GROUP

hwCtStatisticsGroup		1.3.6.1.4.1.2011.5.25.151.3.3.8
Describes the CT of the TE tunnel interface.
Status: current	Access: read-create
OBJECT-GROUP

hwCtFlowTemplateGroup		1.3.6.1.4.1.2011.5.25.151.3.3.10
The table describes the CT-FLOW-Mapping template configuration on the device.
Status: current	Access: read-create
OBJECT-GROUP

hwDsteInterfaceCfgGroup		1.3.6.1.4.1.2011.5.25.151.3.3.11
The table describes the CT-FLOW-Mapping template configuration on the device.
Status: current	Access: read-create
OBJECT-GROUP

hwTunnelDsTeTrap		1.3.6.1.4.1.2011.5.25.151.2
OBJECT IDENTIFIER

hwMplsFqShortage		1.3.6.1.4.1.2011.5.25.151.2.1
This notification is generated when FQ (flow-queue) template resources are shortage.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwMplsSqShortage		1.3.6.1.4.1.2011.5.25.151.2.2
This notification is generated when SQ (subscriber-queue) resources are shortage.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwMplsSqBandwidthExceed		1.3.6.1.4.1.2011.5.25.151.2.3
This notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwMplsHsbFqShortage		1.3.6.1.4.1.2011.5.25.151.2.4
This notification is generated when FQ (flow-queue) template resources in HSB are shortage.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwMplsHsbSqShortage		1.3.6.1.4.1.2011.5.25.151.2.5
This notification is generated when SQ (subscriber-queue) resources in HSB are shortage.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwMplsHsbSqBandwidthExceed		1.3.6.1.4.1.2011.5.25.151.2.6
This notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU.
Status: current	Access: read-create
NOTIFICATION-TYPE

hwTunnelTeTrapGroup		1.3.6.1.4.1.2011.5.25.151.3.3.9
The HUAWEI Tunnel Te trap info.
Status: current	Access: read-create
NOTIFICATION-GROUP

hwTunnelTeCompliance		1.3.6.1.4.1.2011.5.25.151.3.1.1
The compliance statement for HUAWEI-TUNNEL-TE-MIB.
Status: current	Access: read-create
MODULE-COMPLIANCE