HUAWEI-RPR-MIB

File: HUAWEI-RPR-MIB.mib (18634 bytes)

Imported modules

HUAWEI-MIB IEEE-802DOT17-RPR-MIB IF-MIB
SNMPv2-CONF SNMPv2-SMI

Imported symbols

hwDatacomm rprIfIndex rprIfWrapConfig
rprIfRingOperModes rprIfCurrentStatus rprSpanIfIndex
rprSpanId rprSpanTotalRingletReservedRate rprTopoImageIfIndex
rprTopoImageMacAddress rprTopoImageStationIfIndex rprTopoImageRinglet0Hops
rprTopoImageRinglet1Hops rprTopoImageWestProtectionStatus rprTopoImageEastProtectionStatus
rprTopoImageStatus RprSpan ifIndex
ifPhysAddress ifName InterfaceIndex
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

HwRPRIfEventEntry  
SEQUENCE    
  hwRPRLogicIfIndex InterfaceIndex
  hwRPRLogicIfSpanId RprSpan
  hwRPRLogicIfEvent INTEGER
  hwRPRPhyIfEvent INTEGER

HwRPRIfConfigEntry  
SEQUENCE    
  hwRPRIfConfigIfIndex InterfaceIndex
  hwRPRLogicIfTotalBandWidth INTEGER

Defined Values

hwRPR 1.3.6.1.4.1.2011.5.25.36
The HUAWEI-RPR-TRAP-MIB contains objects to Monitor the RPR TRAPs. ********************************* RPR TRAP ********************************** This RPR TRAP consists of the following TRAPs: 1 : hwRPRexcessReservedRateDefect 2 : hwRPRprotMisconfigDefect 3 : hwRPRtopoChange 4 : hwRPRtopoInvalidDefect 5 : hwRPRduplicateMacAddressDefect 6 : hwRPRtopoInstabilityDefect 7 : hwRPRtopoStabilityRestore 8 : hwRPRPhyIfEventTrap 9 : hwRPRLogicIfEventTrap
MODULE-IDENTITY    

hwRPRObjects 1.3.6.1.4.1.2011.5.25.36.1
OBJECT IDENTIFIER    

hwRPRIfEventTable 1.3.6.1.4.1.2011.5.25.36.1.1
A table of interface event information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRPRIfEventEntry

hwRPRIfEventEntry 1.3.6.1.4.1.2011.5.25.36.1.1.1
Interface event information Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRPRIfEventEntry  

hwRPRLogicIfIndex 1.3.6.1.4.1.2011.5.25.36.1.1.1.1
The ifIndex of this RPR logic interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

hwRPRLogicIfSpanId 1.3.6.1.4.1.2011.5.25.36.1.1.1.2
The SpanId of this RPR logic interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  RprSpan  

hwRPRLogicIfEvent 1.3.6.1.4.1.2011.5.25.36.1.1.1.3
Type of logic interface event. SD indicates that SDH Signal of the RPR logic interface degrades; SF indicates that SDH Signal of the RPR logic interface fails; MATEERR indicates that mate cable error caused by mate cable of the RPR physical interface is linked incorrect;
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER sd(1), sf(2), mateerr(3)  

hwRPRPhyIfEvent 1.3.6.1.4.1.2011.5.25.36.1.1.1.4
Type of physical interface event. SDHFramerSDst indicates that SDH Signal of the RPR physical interface degrades; SDHFramerSFst indicates that SDH Signal of the RPR physical interface fails; SDHFramerLOSst indicates that SDH Signal of the RPR physical interface loses; SDHFramerLOFst indicates that SDH framer of the RPR physical interface loses; SDHFramerRDIst indicates that remote Defect Indication ; SDHFramerAISst indicates that alarm Indication Signal; SDHFramerREIst indicates that remote ErrorIndication; Miscabling indicates that cable of the RPR physical interface is linked incorrect; Keepalive indicates that an exchange of messages allowing verification that communication between stations is not active; MateState indicates that mate cable of the RPR physical interface is linked incorrect.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER sdHFramerSDst(1), sdHFramerSFst(2), sdHFramerLOSst(3), sdHFramerLOFst(4), sdHFramerRDIst(5), sdHFramerAISst(6), sdHFramerREIst(7), miscabling(8), keepalive(9), mateState(10)  

hwRPRIfConfigTable 1.3.6.1.4.1.2011.5.25.36.1.2
A table of RPR logic interface configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRPRIfConfigEntry

hwRPRIfConfigEntry 1.3.6.1.4.1.2011.5.25.36.1.2.1
RPR interface Configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRPRIfConfigEntry  

hwRPRIfConfigIfIndex 1.3.6.1.4.1.2011.5.25.36.1.2.1.1
The ifIndex of this RPR logic interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwRPRLogicIfTotalBandWidth 1.3.6.1.4.1.2011.5.25.36.1.2.1.2
The total bandwidth of this RPR logic interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bandwidth1000(1000), bandwidth2488(2488), bandwidth10000(10000)  

hwRPRTraps 1.3.6.1.4.1.2011.5.25.36.2
OBJECT IDENTIFIER    

hwRPRexcessReservedRateDefect 1.3.6.1.4.1.2011.5.25.36.2.1
This defect indicates that the amount of reserved bandwidth on a ringlet exceeds the available LINK_RATE. When an excess reserved rate defect is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRprotMisconfigDefect 1.3.6.1.4.1.2011.5.25.36.2.2
A critical severity defect that indicates the presence of mismatched-protection-configuration stations, based on the value returned by MismatchedProtection(). When a protection configuration defect is present on the station, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRtopoChange 1.3.6.1.4.1.2011.5.25.36.2.3
When an topology change is present, a notification may be generated..
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRtopoInvalidDefect 1.3.6.1.4.1.2011.5.25.36.2.4
A critical severity defect indicating that an invalid entry has been found within the scope of the topology,the stations on the ring excess the MAX_STATIONS or the local station has one or more duplicate secondary MAC addresses. When a topology entry invalid defect ,exceeing MaxStations or duplicate secondary MAC addresses is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRduplicateMacAddressDefect 1.3.6.1.4.1.2011.5.25.36.2.5
A critical severity defect indicating that a duplicateMacAddress has been found on the ring. When a duplicateMacAddress defect is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRtopoInstabilityDefect 1.3.6.1.4.1.2011.5.25.36.2.6
The critical severity Instable topology defect. When an Instable topology defect is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRtopoStabilityRestore 1.3.6.1.4.1.2011.5.25.36.2.7
The critical severity Instable topology restore. When an stable topology is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRPhyIfEventTrap 1.3.6.1.4.1.2011.5.25.36.2.8
The critical severity physical interface defect. When an physical interface defect is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRLogicIfEventTrap 1.3.6.1.4.1.2011.5.25.36.2.9
The critical severity Logic interface defect. When an logic interface defect that caused by physical interface event is present, a notification may be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRNodeConErr 1.3.6.1.4.1.2011.5.25.36.2.10
On RPR ring, to detect the connection, a kind of packet is send between neighbor RPR nodes, This kind of packet is SC(Single-Choke) packet, If a node cannot receive SC packet from neighbor node in KEEPALIVE time, then there is failure between the two nodes. When happened, auto protection is executed by software.!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRNodeConErrResume 1.3.6.1.4.1.2011.5.25.36.2.11
On RPR ring, to detect the connection, a kind of packet is send between neighbor RPR nodes, This kind of packet is SC(Single-Choke) packet, If a node cannot receive SC packet from neighbor node in KEEPALIVE time, then there is failure between the two nodes. When failure is resumed , this notification is sent.!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRNodeMisCabling 1.3.6.1.4.1.2011.5.25.36.2.12
Optical fiber is connected in error. i.e the east direction of one node is connected with east direction of another node, or the west direction of one node is connected with west direction of another node!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRNodeMisCablingResume 1.3.6.1.4.1.2011.5.25.36.2.13
when phenomena that Optical fiber is connected in error disappears, this notification is sent!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRMateErr 1.3.6.1.4.1.2011.5.25.36.2.14
In double RPR operating mode, east and west directions of one rpr node lay on two RPR cards, These two cards are internally conntected by Gigaibit-ethernet, which is called MATE interface. The RPR nodes cannot work normaly under condition of MATE error.!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRMateErrResume 1.3.6.1.4.1.2011.5.25.36.2.15
In double RPR operating mode, east and west directions of one rpr node lay on two RPR cards, These two cards are internally conntected by Gigaibit-ethernet, which is called MATE interface. The RPR nodes cannot work normaly under condition of MATE error.when MATE error is resumed ,this notification is sent!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRLOS 1.3.6.1.4.1.2011.5.25.36.2.16
On RPR physical layer, link connection is detected through physical singal. When can't receive physical singal, then local node from neighbor node, LOS(lost of signal) alarm is report, auto protection is executed by software.!
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRLOSResume 1.3.6.1.4.1.2011.5.25.36.2.17
On RPR physical layer, link connection is detected through physical singal. When can't receive physical singal, then local node from neighbor node, LOS(lost of signal) alarm is report, auto protection is executed by software.when LOS is resumed,this notification is sent
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRPRTrapConformance 1.3.6.1.4.1.2011.5.25.36.3
OBJECT IDENTIFIER    

hwRPRTrapCompliances 1.3.6.1.4.1.2011.5.25.36.3.1
OBJECT IDENTIFIER    

hwRPRTrapCompliance 1.3.6.1.4.1.2011.5.25.36.3.1.1
The compliance statement for entities that implement RPRTRAP on a router.
Status: current Access: read-write
MODULE-COMPLIANCE    

hwRPRTrapGroups 1.3.6.1.4.1.2011.5.25.36.3.2
OBJECT IDENTIFIER    

hwRPRIfEventGroup 1.3.6.1.4.1.2011.5.25.36.3.2.1
provide RPRTRAP objects configuration information.
Status: current Access: read-write
OBJECT-GROUP    

hwRPRTrapGroup 1.3.6.1.4.1.2011.5.25.36.3.2.2
Required objects to provide RPRTRAP objects configuration information.
Status: current Access: read-write
NOTIFICATION-GROUP    

hwRPRIfConfigGroup 1.3.6.1.4.1.2011.5.25.36.3.2.3
Description.
Status: current Access: read-write
OBJECT-GROUP