HUAWEI-NTP-TRAP-MIB

File: HUAWEI-NTP-TRAP-MIB.mib (5884 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC HUAWEI-MIB
INET-ADDRESS-MIB IF-MIB SNMPv2-CONF

Imported symbols

OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
IpAddress Unsigned32 Integer32
Counter64 RowStatus TruthValue
DateAndTime DisplayString huaweiUtility
InetAddressType InetAddress InterfaceIndex
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP

Defined Values

hwNtpTrapMib 1.3.6.1.4.1.2011.6.80
This MIB is to provide TRAP support for NTP. hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the NTP state change & system peer change information
MODULE-IDENTITY    

hwNtpTrapObjects 1.3.6.1.4.1.2011.6.80.1
OBJECT IDENTIFIER    

hwNtpState 1.3.6.1.4.1.2011.6.80.1.1
Indicates the NTP local clock state
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwNtpSource 1.3.6.1.4.1.2011.6.80.1.2
Specifies server IP address to which local NTP clock is synchronized
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

hwNtpSourceVpnName 1.3.6.1.4.1.2011.6.80.1.3
Indicates Vpn instance associated with the peer to which the local NTP clock is synchronized
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwNtpOldSource 1.3.6.1.4.1.2011.6.80.1.4
Specifies server IP address to which local NTP clock was synchronized last time
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

hwNtpOldSourceVpnName 1.3.6.1.4.1.2011.6.80.1.5
Indicates Vpn instance associated with the peer to which the local NTP clock is synchronized last time
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwNtpTraps 1.3.6.1.4.1.2011.6.80.2
OBJECT IDENTIFIER    

hwNtpStateChangeTrap 1.3.6.1.4.1.2011.6.80.2.1
This TRAP is used to notify when the NTP state changes from synchronized to unsynchronized & vice-versa. NTP state changes occur due to reasons listed below 1) System clock is reset by configuration. 2) Selected peer is deleted by configuration. 3) Selected peer is unreachable. 4) Authentication failed for selected peer. 5) Selected peer clock is not synchronized. 6) Time elapsed since peer clock's last update is not within permissible limit. 7) Source stratum is greater than the local stratum. 8) System synchronization source lost. 9) NTP mode mismatch for selected peer.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwNtpSysPeerChangeTrap 1.3.6.1.4.1.2011.6.80.2.2
This TRAP is used to notify the NTP system peer change from one source IP to other source IP without state change. This trap is generated when the selected NTP peer is changed
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwNtpTrapMibConformance 1.3.6.1.4.1.2011.6.80.3
OBJECT IDENTIFIER    

hwNtpTrapMibCompliances 1.3.6.1.4.1.2011.6.80.3.1
OBJECT IDENTIFIER    

hwNtpTrapMibCompliance 1.3.6.1.4.1.2011.6.80.3.1.1
NTP trap MIB compliance.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

hwNtpTrapObjectsGroup 1.3.6.1.4.1.2011.6.80.3.1.2
These objects are used to manage NTP trap parameters
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hwNtpTrapEventGroup 1.3.6.1.4.1.2011.6.80.3.1.3
These objects are used to manage NTP trap parameters.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP