HUAWEI-MLSR-DEV-ADM-MIB

File: HUAWEI-MLSR-DEV-ADM-MIB.mib (56548 bytes)

Imported modules

RFC-1212 RFC1155-SMI RFC1213-MIB
HUAWEI-3COM-OID-MIB

Imported symbols

OBJECT-TYPE TimeTicks IpAddress
Gauge DisplayString huawei
products router mlsr

Defined Types

HwFlashStatus  
INTEGER busy(1), available(2)    

HwFlashEreaseStatus  
INTEGER hwFlhInOperating(1), hwFlhOpSuccess(2), hwFlhOpFailure(3), hwFlhReadOnly(4), hwFlhOpenFailure(5), hwBufferAllocationFailure(6), hwNoOpAfterLastPowered(7)    

RowStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

LoghostEntry  
SEQUENCE    
  loghostIndex INTEGER
  loghostaddress IpAddress
  loghostport INTEGER
  loghostseverity INTEGER
  loghostlanguage INTEGER
  loghostfacility INTEGER
  loghostaccess INTEGER
  loghoststatus RowStatus

LogfilterEntry  
SEQUENCE    
  logfilterIndex INTEGER
  logdevfacility OCTET STRING
  logfilterstatus RowStatus

ModuleEntry  
SEQUENCE    
  moduleIndex INTEGER
  moduleSlotNum INTEGER
  moduleType INTEGER
  moduleFirstPort INTEGER
  moduleNumberOfPorts INTEGER
  moduleVersion INTEGER
  moduleSwVersion DisplayString
  moduleHwVersion DisplayString

Defined Values

routerGeneral 1.3.6.1.4.1.2011.2.2.1
OBJECT IDENTIFIER    

attr 1.3.6.1.4.1.2011.2.2.1.1
OBJECT IDENTIFIER    

basis 1.3.6.1.4.1.2011.2.2.1.1.1
OBJECT IDENTIFIER    

version 1.3.6.1.4.1.2011.2.2.1.1.1.1
The version of the software of system .
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

trap 1.3.6.1.4.1.2011.2.2.1.1.2
OBJECT IDENTIFIER    

log 1.3.6.1.4.1.2011.2.2.1.1.3
OBJECT IDENTIFIER    

logcontroller 1.3.6.1.4.1.2011.2.2.1.1.3.1
The label of log status that is open or close. enable(1) indicates to open;disable(2) indicates to close.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

loghostTable 1.3.6.1.4.1.2011.2.2.1.1.3.2
A list of entries of host recieving log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoghostEntry

loghostEntry 1.3.6.1.4.1.2011.2.2.1.1.3.2.1
Address and level of host receiving log
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LoghostEntry  

loghostIndex 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.1
The index of host that receives logs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

loghostaddress 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.2
The address of host that receives logs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

loghostport 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.3
The port of host that receives logs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

loghostseverity 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.4
The severity indicates the level of log that is sended to host .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8)  

loghostlanguage 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.5
The log in which language is incidated by loglanguage .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER chinese(1), english(2)  

loghostfacility 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.6
The log that send to host is stored in the facility indicated logfacility .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kern(1), user(2), mail(3), daemon(4), auth(5), syslog(6), lpr(7), news(8), uucp(9), cron(10), authpriv(11), ftp(12), local0(17), local1(18), local2(19), local3(20), local4(21), local5(22), local6(23), local7(24)  

loghostaccess 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.7
The variable is the command who perform that netmanager get the saving log information at router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1)  

loghoststatus 1.3.6.1.4.1.2011.2.2.1.1.3.2.1.8
The status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

logfilterTable 1.3.6.1.4.1.2011.2.2.1.1.3.3
A list of entries of filter filter log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LogfilterEntry

logfilterEntry 1.3.6.1.4.1.2011.2.2.1.1.3.3.1
Address and level of filter filter log
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LogfilterEntry  

logfilterIndex 1.3.6.1.4.1.2011.2.2.1.1.3.3.1.1
The index of host that receives logs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

logdevfacility 1.3.6.1.4.1.2011.2.2.1.1.3.3.1.2
Filter name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

logfilterstatus 1.3.6.1.4.1.2011.2.2.1.1.3.3.1.3
The status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrp 1.3.6.1.4.1.2011.2.2.1.1.4
OBJECT IDENTIFIER    

module 1.3.6.1.4.1.2011.2.2.2
OBJECT IDENTIFIER    

moduleTable 1.3.6.1.4.1.2011.2.2.2.1
Possible values of indices are 1..moduleMaxmodules
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ModuleEntry

moduleEntry 1.3.6.1.4.1.2011.2.2.2.1.1
Possible values of indices are 1..stackMaxChassis, 1..chassisMaxModules and 1..moduleMaxmodules
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ModuleEntry  

moduleIndex 1.3.6.1.4.1.2011.2.2.2.1.1.1
Module number in the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

moduleSlotNum 1.3.6.1.4.1.2011.2.2.2.1.1.2
Slot number in the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

moduleType 1.3.6.1.4.1.2011.2.2.2.1.1.3
The product identification of the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unavailable(1), as(2), ss(3), bi(4), e12(5), e14(6), fe1(7), e1(8), fe2(9), vi2(11), vi4(12), vi30(13), s1b(14), sa2(15), as16(16), new8as(17), lsa(18), fxs2(19), fxo2(20), em2(21), fxs4(22), fxo4(23), em4(24), sab(25), e1vi(26), am12(27), am6(28), ndec(29), newsa2(30), aux(31), console(32), sic-wan(33), sic-1fe(34), sic-1sa(35), sic-3as(36), sic-1e1(37), sic-1t1(38), sic-1bu(39), sic-2bu(40), sic-1bs(41), sic-2bs(42), sic-1am(43), sic-2am(44), sic-1em(45), sic-2em(46), sic-1fxs(47), sic-2fxs(48), sic-1fxo(49), sic-2fxo(50), fcm6(51), sa8(52), t11(53), t12(54), t14(55), t1vi(56), fcm4(57), fcm2(58), rtb21ce3(59), ame6(60), ame12(61), e11-f(65), e12-f(66), e14-f(67), t11-f(68), t12-f(69), t14-f(70), e11-f-17(71), t11-f-17(72), rtb21ct3(73), atmadsl1(74), atmadsl2(75), atm155m(76), ase8(77), ase16(78), sae4(79), sae2(80), atmshdsl1(90), atmshdsl2(91), atmshdsl4(92), atm25m(93), atme3(94), atmt3(95), xdsl-fec(96), xdsl-adsl(97), xdsl-gshdsl(98), xdsl-bri(99), xdsl-scc(100), ge1(101), pos155m(102), cpos(103), fe1op(104), sae8(105), atm155m-mm(106), atm155m-sm(107), atm155m-sml(108), fe1op-sfx(109), fe1op-mfx(110), cpos-t1(111), ge1-op(112), ge2-op(113), ge2(114), fix-1wan(115), fix-1sae(116), cavium(117), sic-1Eth(118), atm1ADSLI(119), atm2ADSLI(120), fix-e11(121), fix-t11(122), e18-75(123), e18-120(124), t18(125), sic-1vifxs(126), sic-1vifxo(127), sic-2vifxs(128), sic-2vifxo(129), xdsl-fec-new(130), xdsl-sa(131), bs4(132), ima-8e175(133), ima-8e1120(134), ima-4e175(135), ima-4e1120(136), ima-8t1(137), ima-4t1(138), sic-1t1f(139), sic-1e1f(140), fe4(149), atm1shdsl4wire(151), atmIma4shdsl(152), ls4(153), ls8(154), ls16(155), sic-adls2plus-isdn(156), sic-adls2plus-pots(157), ft3(158), ce32(159), bsv2(160), bsv4(161), rpu(162), erpu(163), ssl(164), nsa(165), fe18-75(220), fe18-120(221), ft18(222), cf-card(223), bsv2-v2(224), e1vi1-v2(225), e1vi2(226), t1vi1-v2(227), t1vi2(228), osm(229), sd707(230), dm-epri(231), dm-tpri(232), erpu-h(233), sic-2e1-f(277), sic-1e1-f-v2(278), oneatm-oc3(281)  

moduleFirstPort 1.3.6.1.4.1.2011.2.2.2.1.1.4
The portIndex of the first port on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

moduleNumberOfPorts 1.3.6.1.4.1.2011.2.2.2.1.1.5
The number of ports on the module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

moduleVersion 1.3.6.1.4.1.2011.2.2.2.1.1.6
Hardware version number for this module. First version is 0, second is 1, and so on.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

moduleSwVersion 1.3.6.1.4.1.2011.2.2.2.1.1.7
Software version number for this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

moduleHwVersion 1.3.6.1.4.1.2011.2.2.2.1.1.8
Hardware version number for this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwFlashMan 1.3.6.1.4.1.2011.2.2.3
OBJECT IDENTIFIER    

hwFlhTotalSize 1.3.6.1.4.1.2011.2.2.3.1
Total size of the Flash device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwFlhUnusedSize 1.3.6.1.4.1.2011.2.2.3.2
Free space within a Flash.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwFlhEraseTime 1.3.6.1.4.1.2011.2.2.3.3
The last time of the flash device ereased. The value of the object is the time of sysUpTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

hwFlhEraseStat 1.3.6.1.4.1.2011.2.2.3.4
The flash ereasing status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HwFlashEreaseStatus  

hwFlhCurStat 1.3.6.1.4.1.2011.2.2.3.5
The flash's current status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HwFlashStatus  

huaweiMixinfo 1.3.6.1.4.1.2011.2.2.4
OBJECT IDENTIFIER    

hwModuleId 1.3.6.1.4.1.2011.2.2.4.1
Unique ID string. Defaults to module ID number if available, otherwise empty.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwROMID 1.3.6.1.4.1.2011.2.2.4.2
System description and version information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwROMVersion 1.3.6.1.4.1.2011.2.2.4.3
The version of systen ROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwROMSysVersion 1.3.6.1.4.1.2011.2.2.4.4
The software version of system ROM
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwRAMSize 1.3.6.1.4.1.2011.2.2.4.5
The total size of system RAM.The unit is Byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwNVRAMSize 1.3.6.1.4.1.2011.2.2.4.6
The total size of system non-volatile memory. The unit is Byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwNVRAMUsed 1.3.6.1.4.1.2011.2.2.4.7
The usage of system non-volatile memory. The unit is Byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwConfigReg 1.3.6.1.4.1.2011.2.2.4.8
This variable indicates the system register's value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER flash(1), nvram(2)  

hwConfigRegNextReboot 1.3.6.1.4.1.2011.2.2.4.9
This variable indicates the system register's value when next reboot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwTFTPEnabled 1.3.6.1.4.1.2011.2.2.4.10
If yes, indicates that the device can be configed through tftp. If no indicates that the device cannt be configed through tftp.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hwMemoryFree 1.3.6.1.4.1.2011.2.2.4.11
The hwMemoryFree mib object is obsolete as of the variable hwMemoryFree in hwMemoryTable
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

hwCpuCostRatePer5Sec 1.3.6.1.4.1.2011.2.2.4.12
The system CPU average busy percentage in the last 5 seconds period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwCpuCostRatePer5Minute 1.3.6.1.4.1.2011.2.2.4.13
The system CPU average busy percentage in the last 5 minutes period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwCurrentTime 1.3.6.1.4.1.2011.2.2.4.14
The current time (in timetick: hundredths of a second)
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

hwSysAirFlowTempIn 1.3.6.1.4.1.2011.2.2.4.15
The current temperature of system.If the temperature is normal,ok(0) will return; If too cold,overcold(1) will return;If too hot,overhot(2) will return.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), overcold(1), overhot(2)  

hwBuzzerStatus 1.3.6.1.4.1.2011.2.2.4.16
The current status of buzzer. silence(1) indicates the status is silence;tweet(2) indicates the status is tweet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER silence(1), tweet(2)  

hwFansStatus 1.3.6.1.4.1.2011.2.2.4.17
The current status of system fan: running(0) indicates the fan is running;stopping(1) indicates the fan is stopping; nofan(2) indicates no fan in the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER running(0), stopping(1), nofan(2)  

hwPowerStatus 1.3.6.1.4.1.2011.2.2.4.18
The current status of system power: 0:ok;1:fail;2:nopower.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), fail(1), nopower(2)  

hwSecondPowerStatus 1.3.6.1.4.1.2011.2.2.4.19
The current status of second system power: 0:ok;1:fail;2:nopower.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), fail(1), nopower(2)  

huaweiMemoryMan 1.3.6.1.4.1.2011.2.2.5
OBJECT IDENTIFIER    

hwUsedMemory 1.3.6.1.4.1.2011.2.2.5.1
The use size of the memory. The unit is Byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

hwFreeMemory 1.3.6.1.4.1.2011.2.2.5.2
The free size of the memory. The unit is Byte
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

hwMemoryLargestFree 1.3.6.1.4.1.2011.2.2.5.3
The largest free size of the contiguous area in memory. The unit is byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

hwBuffer32Size 1.3.6.1.4.1.2011.2.2.5.4
Contains the size of 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32Total 1.3.6.1.4.1.2011.2.2.5.5
Contains the total number of 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32Free 1.3.6.1.4.1.2011.2.2.5.6
Contains the number of free 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32Used 1.3.6.1.4.1.2011.2.2.5.7
Contains the number of used 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32DropCounts 1.3.6.1.4.1.2011.2.2.5.8
Contains the number of Drop 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32FreeError2 1.3.6.1.4.1.2011.2.2.5.9
Contains the number of Free Error2 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32FreeError3 1.3.6.1.4.1.2011.2.2.5.10
Contains the number of Free Error3 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer32CollectCounts 1.3.6.1.4.1.2011.2.2.5.11
Contains the number of Collect 32 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64Size 1.3.6.1.4.1.2011.2.2.5.12
Contains the size of 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64Total 1.3.6.1.4.1.2011.2.2.5.13
Contains the total number of 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64Free 1.3.6.1.4.1.2011.2.2.5.14
Contains the number of free 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64Used 1.3.6.1.4.1.2011.2.2.5.15
Contains the number of used 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64DropCounts 1.3.6.1.4.1.2011.2.2.5.16
Contains the number of Drop 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64FreeError2 1.3.6.1.4.1.2011.2.2.5.17
Contains the number of Free Error2 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64FreeError3 1.3.6.1.4.1.2011.2.2.5.18
Contains the number of Free Error3 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer64CollectCounts 1.3.6.1.4.1.2011.2.2.5.19
Contains the number of Collect 64 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128Size 1.3.6.1.4.1.2011.2.2.5.20
Contains the size of 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128Total 1.3.6.1.4.1.2011.2.2.5.21
Contains the total number of 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128Free 1.3.6.1.4.1.2011.2.2.5.22
Contains the number of free 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128Used 1.3.6.1.4.1.2011.2.2.5.23
Contains the number of used 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128DropCounts 1.3.6.1.4.1.2011.2.2.5.24
Contains the number of Drop 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128FreeError2 1.3.6.1.4.1.2011.2.2.5.25
Contains the number of Free Error2 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128FreeError3 1.3.6.1.4.1.2011.2.2.5.26
Contains the number of Free Error3 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer128CollectCounts 1.3.6.1.4.1.2011.2.2.5.27
Contains the number of Collect 128 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256Size 1.3.6.1.4.1.2011.2.2.5.28
Contains the size of 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256Total 1.3.6.1.4.1.2011.2.2.5.29
Contains the total number of 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256Free 1.3.6.1.4.1.2011.2.2.5.30
Contains the number of free 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256Used 1.3.6.1.4.1.2011.2.2.5.31
Contains the number of used 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256DropCounts 1.3.6.1.4.1.2011.2.2.5.32
Contains the number of Drop 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256FreeError2 1.3.6.1.4.1.2011.2.2.5.33
Contains the number of Free Error2 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256FreeError3 1.3.6.1.4.1.2011.2.2.5.34
Contains the number of Free Error3 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256CollectCounts 1.3.6.1.4.1.2011.2.2.5.35
Contains the number of Collect 256 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512Size 1.3.6.1.4.1.2011.2.2.5.36
Contains the size of 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512Total 1.3.6.1.4.1.2011.2.2.5.37
Contains the total number of 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512Free 1.3.6.1.4.1.2011.2.2.5.38
Contains the number of free 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512Used 1.3.6.1.4.1.2011.2.2.5.39
Contains the number of used 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512DropCounts 1.3.6.1.4.1.2011.2.2.5.40
Contains the number of Drop 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512FreeError2 1.3.6.1.4.1.2011.2.2.5.41
Contains the number of Free Error2 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512FreeError3 1.3.6.1.4.1.2011.2.2.5.42
Contains the number of Free Error3 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer512CollectCounts 1.3.6.1.4.1.2011.2.2.5.43
Contains the number of Collect 512 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024Size 1.3.6.1.4.1.2011.2.2.5.44
Contains the size of 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024Total 1.3.6.1.4.1.2011.2.2.5.45
Contains the total number of 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024Free 1.3.6.1.4.1.2011.2.2.5.46
Contains the number of free 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024Used 1.3.6.1.4.1.2011.2.2.5.47
Contains the number of used 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024DropCounts 1.3.6.1.4.1.2011.2.2.5.48
Contains the number of Drop 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024FreeError2 1.3.6.1.4.1.2011.2.2.5.49
Contains the number of Free Error2 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024FreeError3 1.3.6.1.4.1.2011.2.2.5.50
Contains the number of Free Error3 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer1024CollectCounts 1.3.6.1.4.1.2011.2.2.5.51
Contains the number of Collect 1024 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048Size 1.3.6.1.4.1.2011.2.2.5.52
Contains the size of 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048Total 1.3.6.1.4.1.2011.2.2.5.53
Contains the total number of 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048Free 1.3.6.1.4.1.2011.2.2.5.54
Contains the number of free 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048Used 1.3.6.1.4.1.2011.2.2.5.55
Contains the number of used 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048DropCounts 1.3.6.1.4.1.2011.2.2.5.56
Contains the number of Drop 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048FreeError2 1.3.6.1.4.1.2011.2.2.5.57
Contains the number of Free Error2 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048FreeError3 1.3.6.1.4.1.2011.2.2.5.58
Contains the number of Free Error3 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer2048CollectCounts 1.3.6.1.4.1.2011.2.2.5.59
Contains the number of Collect 2048 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096Size 1.3.6.1.4.1.2011.2.2.5.60
Contains the size of 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096Total 1.3.6.1.4.1.2011.2.2.5.61
Contains the total number of 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096Free 1.3.6.1.4.1.2011.2.2.5.62
Contains the number of free 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096Used 1.3.6.1.4.1.2011.2.2.5.63
Contains the number of used 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096DropCounts 1.3.6.1.4.1.2011.2.2.5.64
Contains the number of Drop 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096FreeError2 1.3.6.1.4.1.2011.2.2.5.65
Contains the number of Free Error2 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096FreeError3 1.3.6.1.4.1.2011.2.2.5.66
Contains the number of Free Error3 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer4096CollectCounts 1.3.6.1.4.1.2011.2.2.5.67
Contains the number of Collect 4096 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192Size 1.3.6.1.4.1.2011.2.2.5.68
Contains the size of 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192Total 1.3.6.1.4.1.2011.2.2.5.69
Contains the total number of 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192Free 1.3.6.1.4.1.2011.2.2.5.70
Contains the number of free 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192Used 1.3.6.1.4.1.2011.2.2.5.71
Contains the number of used 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192DropCounts 1.3.6.1.4.1.2011.2.2.5.72
Contains the number of Drop 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192FreeError2 1.3.6.1.4.1.2011.2.2.5.73
Contains the number of Free Error2 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192FreeError3 1.3.6.1.4.1.2011.2.2.5.74
Contains the number of Free Error3 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer8192CollectCounts 1.3.6.1.4.1.2011.2.2.5.75
Contains the number of Collect 8192 byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KSize 1.3.6.1.4.1.2011.2.2.5.76
Contains the size of 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KTotal 1.3.6.1.4.1.2011.2.2.5.77
Contains the total number of 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KFree 1.3.6.1.4.1.2011.2.2.5.78
Contains the number of free 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KUsed 1.3.6.1.4.1.2011.2.2.5.79
Contains the number of used 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KDropCounts 1.3.6.1.4.1.2011.2.2.5.80
Contains the number of Drop 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KFreeError2 1.3.6.1.4.1.2011.2.2.5.81
Contains the number of Free Error2 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KFreeError3 1.3.6.1.4.1.2011.2.2.5.82
Contains the number of Free Error3 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer45KCollectCounts 1.3.6.1.4.1.2011.2.2.5.83
Contains the number of Collect 45K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KSize 1.3.6.1.4.1.2011.2.2.5.84
Contains the size of 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KTotal 1.3.6.1.4.1.2011.2.2.5.85
Contains the total number of 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KFree 1.3.6.1.4.1.2011.2.2.5.86
Contains the number of free 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KUsed 1.3.6.1.4.1.2011.2.2.5.87
Contains the number of used 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KDropCounts 1.3.6.1.4.1.2011.2.2.5.88
Contains the number of Drop 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KFreeError2 1.3.6.1.4.1.2011.2.2.5.89
Contains the number of Free Error2 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KFreeError3 1.3.6.1.4.1.2011.2.2.5.90
Contains the number of Free Error3 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwBuffer256KCollectCounts 1.3.6.1.4.1.2011.2.2.5.91
Contains the number of Collect 256K byte buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwMemoryMallocFail 1.3.6.1.4.1.2011.2.2.5.92
The times of memory allocation failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwMemoryMallocNoMem 1.3.6.1.4.1.2011.2.2.5.93
The times of memory allocation failures due to no free memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hwConfigFile 1.3.6.1.4.1.2011.2.2.6
OBJECT IDENTIFIER    

hwRunCfgChangedTime 1.3.6.1.4.1.2011.2.2.6.1
This object indicates the SysUpTime at which the running cofiguration was last changed. When the running configuration is changed but not saved, the value of hwRunCfgChangedTime is greater than hwRunCfgSavedTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

hwRunCfgSavedTime 1.3.6.1.4.1.2011.2.2.6.2
This object indicates the SysUpTime at which the running cofiguration was last saved. When the running configuration is changed but not saved, the value of hwRunCfgChangedTime is greater than hwRunCfgSavedTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

hwStartCfgChangedTime 1.3.6.1.4.1.2011.2.2.6.3
The time of SysUpTime at which the startup configuration was last written.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

hwNetConfigName 1.3.6.1.4.1.2011.2.2.6.4
Network configuration file name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwHostConfigName 1.3.6.1.4.1.2011.2.2.6.5
Host configuration file name.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

hwmSystem 1.3.6.1.4.1.2011.2.33.6
OBJECT IDENTIFIER    

hwmRouterSerialNO 1.3.6.1.4.1.2011.2.33.6.1
The router's unique identification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwmWhyReboot 1.3.6.1.4.1.2011.2.33.6.2
Give the reason of the system's reboot. If the system has been reboot, the value of which is null.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwmHostName 1.3.6.1.4.1.2011.2.33.6.3
An name for this system. By convention, this is the node's fully-qualified domain name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

hwmHostHwVersion 1.3.6.1.4.1.2011.2.33.6.4
The haredware version of the router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString