HUAWEI-IPFPM-MIB

File: HUAWEI-IPFPM-MIB.mib (121207 bytes)

Imported modules

HUAWEI-MIB IF-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hwDatacomm InterfaceIndex OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP IpAddress
Integer32 Unsigned32 Counter64
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
RowStatus TruthValue TimeStamp
TEXTUAL-CONVENTION

Defined Types

HWEnabledStatus  
This TC describes that the status of some function is enabled or disabled.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

HWIpfpmStatErrInfo  
This TC describes whether the statistics data is invalid or not and the reason of invalidation.
TEXTUAL-CONVENTION    
  INTEGER noErr(0), initialIntervalForward(1), initialIntervalBackward(2), initialIntervalBidirection(3), inconsistInterval(4), asynClock(5), incompleteDataForward(6), incompleteDataBackward(7), incompleteDataBidirection(8), noFlowDataForward(9), noFlowDataBackward(10), noFlowDataBidirection(11), errFlowDataForward(12), errFlowDataBackward(13), errFlowDataBidirection(14), multiDataOneDelay(15), multiDataTwoDelay(16), errDelayVariationForward(17), errDelayVariationBackward(18), errDelayVariationBidirection(19), errMultiSourceSwitch(20), unknownErr(21)  

HWIpfpmMeasureFlag  
This TC describes the optional bit of an IP packet for IPFPM measurement.
TEXTUAL-CONVENTION    
  INTEGER flagsBit0(1), tosBit3(2), tosBit4(3), tosBit5(4), tosBit6(5), tosBit7(6)  

HWIpfpmFlowType  
This TC describes the type of flow in an test instance.
TEXTUAL-CONVENTION    
  INTEGER null(0), forward(1), backward(2), bidirectional(3), forwardandbackward(4)  

HWIpfpmMcpFlowType  
This TC describes the type of flow in an test instance.
TEXTUAL-CONVENTION    
  INTEGER none(0), forward(1), backward(2), bidirectional(3)  

HWIpfpmFlowTlpDirec  
This TC describes the role of flow TLP in the measurement network.
TEXTUAL-CONVENTION    
  INTEGER ingress(1), egress(2)  

HWIpfpmTlpRole  
This TC describes the TLP point.
TEXTUAL-CONVENTION    
  INTEGER in-point(1), out-point(2), mid-point(3)  

HWIpfpmDelayTlpRole  
This TC describes the TLP point in delay measure.
TEXTUAL-CONVENTION    
  INTEGER e2e(1), section(2)  

HWIpfpmLossTlpRole  
This TC describes the TLP point in loss measure.
TEXTUAL-CONVENTION    
  INTEGER e2e(1), section(2)  

HWIpfpmMcpTlpRole  
This TC describes the role of TLP in the ACH.
TEXTUAL-CONVENTION    
  INTEGER in-group(1), out-group(2)  

HWIpfpmAuthType  
This TC describes the type of IPFPM authentication.
TEXTUAL-CONVENTION    
  INTEGER hmac-sha256(1)  

HWIpfpmDelayMeasType  
This TC describes the type of delay measure of an test instance.
TEXTUAL-CONVENTION    
  INTEGER null(0), oneway(1), twoway(2)  

HWIpfpmMeasTimeRangeType  
This TC describes the type of on-demand loss or delay measure of an test instance.
TEXTUAL-CONVENTION    
  INTEGER null(0), timerange5m(5), timerange10m(10), timerange15m(15), timerange30m(30)  

HWIpfpmInstIntervalType  
This TC describes the interval type of an test instance.
TEXTUAL-CONVENTION    
  INTEGER interval1s(1), interval10s(10), interval60s(60), interval600s(600)  

HWIpfpmInstType  
This TC describes the type of an test instance.
TEXTUAL-CONVENTION    
  INTEGER unicast(0), multicastsrc(1), multicastrecv(2)  

HWIpfpmMMSType  
This TC describes the type of multicastsrc.
TEXTUAL-CONVENTION    
  INTEGER master(0), slave(1)  

HWIpfpmVpnType  
This TC describes the type of VPN. The value 'none' represents the public network, the value 'manage-vpn' represents the net-mange VPN. and the value 'vpn-instance' represents the normal VPN instance.
TEXTUAL-CONVENTION    
  INTEGER none(0), manage-vpn(1), vpn-instance(2)  

HWIpfpmClockSoure  
This TC describes the type of ClockSoure. The value 'ntp' represents using ntp.
TEXTUAL-CONVENTION    
  INTEGER default(0), ntp(1)  

HwIpfpmMcpAuthEntry  
SEQUENCE    
  hwIpfpmMcpAuthKeyId Integer32
  hwIpfpmMcpAuthType HWIpfpmAuthType
  hwIpfpmMcpAuthKey OCTET STRING
  hwIpfpmMcpAuthRowStatus RowStatus

HwIpfpmMcpInstEntry  
SEQUENCE    
  hwIpfpmMcpInstId Integer32
  hwIpfpmMcpInstDesc OCTET STRING
  hwIpfpmMcpLossRatioUpThres Integer32
  hwIpfpmMcpLossRatioLowThres Integer32
  hwIpfpmMcpOneDelayUpThres Integer32
  hwIpfpmMcpOneDelayLowThres Integer32
  hwIpfpmMcpTwoDelayUpThres Integer32
  hwIpfpmMcpTwoDelayLowThres Integer32
  hwIpfpmMcpMeasureEnable HWEnabledStatus
  hwIpfpmMcpInstRowStatus RowStatus
  hwIpfpmMcpInstType HWIpfpmInstType
  hwIpfpmMcpSourceInstId Integer32

HwIpfpmMcpDcpEntry  
SEQUENCE    
  hwIpfpmMcpDcpId IpAddress
  hwIpfpmMcpDcpRowStatus RowStatus

HwIpfpmMcpAchEntry  
SEQUENCE    
  hwIpfpmMcpAchId Integer32
  hwIpfpmMcpFlowType HWIpfpmMcpFlowType
  hwIpfpmMcpAchRowStatus RowStatus

HwIpfpmMcpTlpEntry  
SEQUENCE    
  hwIpfpmMcpTlpRole HWIpfpmMcpTlpRole
  hwIpfpmMcpTlpDcpId IpAddress
  hwIpfpmMcpTlpId Integer32
  hwIpfpmMcpTlpRowStatus RowStatus

HwIpfpmMcpSrcInstReferQueryEntry  
SEQUENCE    
  hwIpfpmMcpSrcInstReferCnt Integer32

HwIpfpmMcpInstAchIndexEntry  
SEQUENCE    
  hwIpfpmMcpSeqNo Counter64

HwIpfpmMcpLossStatsEntry  
SEQUENCE    
  hwIpfpmMcpSeqNoHigh Unsigned32
  hwIpfpmMcpSeqNoLow Unsigned32
  hwIpfpmMcpLossErrInfo HWIpfpmStatErrInfo
  hwIpfpmMcpForwardLossPkts Counter64
  hwIpfpmMcpForwardLossPktsSign Integer32
  hwIpfpmMcpForwardLossBytes Counter64
  hwIpfpmMcpForwardLossBytesSign Integer32
  hwIpfpmMcpForwardPkts Counter64
  hwIpfpmMcpForwardBytes Counter64
  hwIpfpmMcpForwardLossRatio Integer32
  hwIpfpmMcpBackwardLossPkts Counter64
  hwIpfpmMcpBackwardLossPktsSign Integer32
  hwIpfpmMcpBackwardLossBytes Counter64
  hwIpfpmMcpBackwardLossBytesSign Integer32
  hwIpfpmMcpBackwardPkts Counter64
  hwIpfpmMcpBackwardBytes Counter64
  hwIpfpmMcpBackwardLossRatio Integer32
  hwIpfpmMcpForwardLossMMSType HWIpfpmMMSType
  hwIpfpmMcpForwardLossMMSSwitch TruthValue

HwIpfpmMcpOneDelayStatEntry  
SEQUENCE    
  hwIpfpmMcpOneDelayErrInfo HWIpfpmStatErrInfo
  hwIpfpmMcpForwardOneDelay Integer32
  hwIpfpmMcpForwardOneDelayVariation Integer32
  hwIpfpmMcpBackwardOneDelay Integer32
  hwIpfpmMcpBackwardOneDelayVariation Integer32
  hwIpfpmMcpForwardOneDelayMMSType HWIpfpmMMSType

HwIpfpmMcpTwoDelayStatEntry  
SEQUENCE    
  hwIpfpmMcpTwoDelayErrInfo HWIpfpmStatErrInfo
  hwIpfpmMcpTwoDelay Integer32
  hwIpfpmMcpTwoDelayVariation Integer32
  hwIpfpmMcpForwardDelay Integer32
  hwIpfpmMcpForwardDelayVariation Integer32
  hwIpfpmMcpBackwardDelay Integer32
  hwIpfpmMcpBackwardDelayVariation Integer32

HwIpfpmMcpOneDelayMultiStatEntry  
SEQUENCE    
  hwIpfpmMcpOneDelayFlowType HWIpfpmMcpFlowType
  hwIpfpmMcpOneDelayMultiSrcDCP IpAddress
  hwIpfpmMcpOneDelayMultiSrcTLP Integer32
  hwIpfpmMcpOneDelayMultiDesDCP IpAddress
  hwIpfpmMcpOneDelayMultiDesTLP Integer32
  hwIpfpmMcpOneDelayMultiErrInfo HWIpfpmStatErrInfo
  hwIpfpmMcpOneDelayMulti Integer32
  hwIpfpmMcpOneDelayMultiVariation Integer32

HwIpfpmMcpTwoDelayMultiStatEntry  
SEQUENCE    
  hwIpfpmMcpForwardDelayMultiSrcDCP IpAddress
  hwIpfpmMcpForwardDelayMultiSrcTLP Integer32
  hwIpfpmMcpForwardDelayMultiDesDCP IpAddress
  hwIpfpmMcpForwardDelayMultiDesTLP Integer32
  hwIpfpmMcpBackwardDelayMultiSrcDCP IpAddress
  hwIpfpmMcpBackwardDelayMultiSrcTLP Integer32
  hwIpfpmMcpBackwardDelayMultiDesDCP IpAddress
  hwIpfpmMcpBackwardDelayMultiDesTLP Integer32
  hwIpfpmMcpTwoDelayMultiErrInfo HWIpfpmStatErrInfo
  hwIpfpmMcpTwoDelayMulti Integer32
  hwIpfpmMcpTwoDelayMultiVariation Integer32
  hwIpfpmMcpForwardDelayMulti Integer32
  hwIpfpmMcpForwardDelayMultiVariation Integer32
  hwIpfpmMcpBackwardDelayMulti Integer32
  hwIpfpmMcpBackwardDelayMultiVariation Integer32

HwIpfpmDcpAuthEntry  
SEQUENCE    
  hwIpfpmDcpAuthKeyId Integer32
  hwIpfpmDcpAuthType HWIpfpmAuthType
  hwIpfpmDcpAuthKey OCTET STRING
  hwIpfpmDcpAuthRowStatus RowStatus

HwIpfpmDcpInstEntry  
SEQUENCE    
  hwIpfpmDcpInstId Integer32
  hwIpfpmDcpInstDesc OCTET STRING
  hwIpfpmDcpInstMcpId IpAddress
  hwIpfpmDcpInstMcpPort Integer32
  hwIpfpmDcpInstInterval HWIpfpmInstIntervalType
  hwIpfpmDcpInstRowStatus RowStatus
  hwIpfpmDcpInstType HWIpfpmInstType
  hwIpfpmDcpSourceInstId Integer32
  hwIpfpmDcpInstMcpVpnName OCTET STRING
  hwIpfpmDcpInstMcpVpnType HWIpfpmVpnType
  hwIpfpmDcpInstGroupId Integer32

HwIpfpmDcpInstAuthEntry  
SEQUENCE    
  hwIpfpmDcpInstAuthKeyId Integer32
  hwIpfpmDcpInstAuthType HWIpfpmAuthType
  hwIpfpmDcpInstAuthKey OCTET STRING
  hwIpfpmDcpInstAuthRowStatus RowStatus

HwIpfpmDcpFlowEntry  
SEQUENCE    
  hwIpfpmDcpFlowType HWIpfpmFlowType
  hwIpfpmDcpFlowProtocol Integer32
  hwIpfpmDcpFlowDscp Integer32
  hwIpfpmDcpFlowSrcAddr IpAddress
  hwIpfpmDcpFlowSrcMaskLen Integer32
  hwIpfpmDcpFlowDstAddr IpAddress
  hwIpfpmDcpFlowDstMaskLen Integer32
  hwIpfpmDcpFlowSrcPortBgn Integer32
  hwIpfpmDcpFlowSrcPortEnd Integer32
  hwIpfpmDcpFlowDstPortBgn Integer32
  hwIpfpmDcpFlowDstPortEnd Integer32
  hwIpfpmDcpFlowRowStatus RowStatus
  hwIpfpmDcpFlowOuterSrcAddr IpAddress
  hwIpfpmDcpFlowOuterDstAddr IpAddress
  hwIpfpmDcpFlowForwardGtpTeid Unsigned32
  hwIpfpmDcpFlowBackwardGtpTeid Unsigned32
  hwIpfpmDcpFlowVxlan TruthValue
  hwIpfpmDcpFlowVni Integer32

HwIpfpmDcpInstTlpEntry  
SEQUENCE    
  hwIpfpmDcpInstTlpRole HWIpfpmTlpRole
  hwIpfpmDcpInstTlpFlowType HWIpfpmFlowType
  hwIpfpmDcpInstTlpDirec HWIpfpmFlowTlpDirec
  hwIpfpmDcpInstTlpVpnLabel Integer32
  hwIpfpmDcpInstTlpCtrlWordFlag TruthValue
  hwIpfpmDcpInstTlpLspLabel Integer32
  hwIpfpmDcpInstTlpL2VpnFlag TruthValue
  hwIpfpmDcpInstTlpTpId OCTET STRING
  hwIpfpmDcpInstTlpRowStatus RowStatus
  hwIpfpmDcpInstTlpMultiSrcType HWIpfpmMMSType
  hwIpfpmDcpInstTlpFlowLabelFlag TruthValue
  hwIpfpmDcpInstTlpLspLabel2 Integer32
  hwIpfpmDcpInstTlpLspLabel3 Integer32
  hwIpfpmDcpInstTlpOuterVlan Integer32
  hwIpfpmDcpInstTlpInnerVlan Integer32
  hwIpfpmDcpInstTlpBackwardVpnLabel Integer32
  hwIpfpmDcpInstTlpBackwardCtrlWordFlag TruthValue
  hwIpfpmDcpInstTlpBackwardLspLabel Integer32
  hwIpfpmDcpInstTlpBackwardLspLabel2 Integer32
  hwIpfpmDcpInstTlpBackwardLspLabel3 Integer32
  hwIpfpmDcpInstTlpBackwardL2VpnFlag TruthValue
  hwIpfpmDcpInstTlpBackwardFlowLabelFlag TruthValue
  hwIpfpmDcpInstTlpBackwardOuterVlan Integer32
  hwIpfpmDcpInstTlpBackwardInnerVlan Integer32
  hwIpfpmDcpInstTlpBackwardTpId OCTET STRING

HwIpfpmDcpLossMeasEntry  
SEQUENCE    
  hwIpfpmDcpLossEnable HWEnabledStatus
  hwIpfpmDcpLossContEnable HWEnabledStatus
  hwIpfpmDcpLossTimeRange HWIpfpmMeasTimeRangeType
  hwIpfpmDcpLossTlpRole HWIpfpmLossTlpRole

HwIpfpmDcpDelayMeasEntry  
SEQUENCE    
  hwIpfpmDcpDelayEnable HWEnabledStatus
  hwIpfpmDcpDelayContEnable HWEnabledStatus
  hwIpfpmDcpDelayMeasType HWIpfpmDelayMeasType
  hwIpfpmDcpDelayTimeRange HWIpfpmMeasTimeRangeType
  hwIpfpmDcpDelayTlpRole HWIpfpmDelayTlpRole
  hwIpfpmDcpDelayForwardTlpId Integer32
  hwIpfpmDcpDelayBackwardTlpId Integer32

HwIpfpmDcpTlpEntry  
SEQUENCE    
  hwIpfpmDcpTlpId Integer32
  hwIpfpmDcpTlpIfIndex InterfaceIndex
  hwIpfpmDcpTlpRowStatus RowStatus
  hwIpfpmDcpTlpVlanId Integer32

HwIpfpmDcpTlpQueryEntry  
SEQUENCE    
  hwIpfpmDcpTlpQueryIfIndex InterfaceIndex
  hwIpfpmDcpTlpQueryTlpId Integer32
  hwIpfpmDcpTlpQueryVlanId Integer32

HwIpfpmDcpSrcInstReferQueryEntry  
SEQUENCE    
  hwIpfpmDcpSrcInstReferCnt Integer32

HwIpfpmDcpTlpQueryExtEntry  
SEQUENCE    
  hwIpfpmDcpTlpQueryExtIfIndex InterfaceIndex
  hwIpfpmDcpTlpQueryExtTlpId Integer32
  hwIpfpmDcpTlpQueryExtVlanId Integer32
  hwIpfpmDcpTlpQueryExtOntId Integer32
  hwIpfpmDcpTlpQueryExtOntPortType INTEGER
  hwIpfpmDcpTlpQueryExtOntPortId Integer32

HwIpfpmDcpTlpExtEntry  
SEQUENCE    
  hwIpfpmDcpExtTlpId Integer32
  hwIpfpmDcpTlpExtIfIndex Integer32
  hwIpfpmDcpTlpExtRowStatus RowStatus
  hwIpfpmDcpTlpExtVlanId Integer32
  hwIpfpmDcpTlpExtOntId Integer32
  hwIpfpmDcpTlpExtOntPortType INTEGER
  hwIpfpmDcpTlpExtOntPortId Integer32

HwIpfpmDcpInstTlpNHEntry  
SEQUENCE    
  hwIpfpmDcpNexthopIp IpAddress
  hwIpfpmDcpInstTlpNHRowStatus RowStatus

Defined Values

hwIpfpmMib 1.3.6.1.4.1.2011.5.25.316
This MIB describes objects to manage IPFPM (IP Flow Performance Measurement). IPFPM provides a method for IP flow performance measurement, in which MCP (Measurement Control Point),DCP (Data Collecting Point) and TLP (Target Logic Point) are three kinds of roles working together. TLP is responsible for implementing measurement and generating the measurement data. DCP manages TLPs and get measurement data from them to report to MCP. MCP works as the control role to collect and calculate the measurement data that DCP reported.
MODULE-IDENTITY    

hwIpfpmMcpObjects 1.3.6.1.4.1.2011.5.25.316.1
OBJECT IDENTIFIER    

hwIpfpmDcpObjects 1.3.6.1.4.1.2011.5.25.316.2
OBJECT IDENTIFIER    

hwIpfpmTraps 1.3.6.1.4.1.2011.5.25.316.3
OBJECT IDENTIFIER    

hwIpfpmConformance 1.3.6.1.4.1.2011.5.25.316.4
OBJECT IDENTIFIER    

hwIpfpmMcpConfiguration 1.3.6.1.4.1.2011.5.25.316.1.1
OBJECT IDENTIFIER    

hwIpfpmMcpStatistics 1.3.6.1.4.1.2011.5.25.316.1.2
OBJECT IDENTIFIER    

hwIpfpmDcpConfiguration 1.3.6.1.4.1.2011.5.25.316.2.1
OBJECT IDENTIFIER    

hwIpfpmDcpTrapObjects 1.3.6.1.4.1.2011.5.25.316.2.2
OBJECT IDENTIFIER    

hwIpfpmMcpGlobalTable 1.3.6.1.4.1.2011.5.25.316.1.1.1
OBJECT IDENTIFIER    

hwIpfpmMcpEnable 1.3.6.1.4.1.2011.5.25.316.1.1.1.1
This object indicates that the MCP (Measurement Control Point) function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmMcpId 1.3.6.1.4.1.2011.5.25.316.1.1.1.2
The value of this object indicates the identification of MCP. The value 0.0.0.0 represents that it is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpUdpPort 1.3.6.1.4.1.2011.5.25.316.1.1.1.3
The value of this object indicates the port that MCP listens on as the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1024..65535  

hwIpfpmMcpAuthTable 1.3.6.1.4.1.2011.5.25.316.1.1.4
The table contains attribute of MCP authenticaiton.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpAuthEntry

hwIpfpmMcpAuthEntry 1.3.6.1.4.1.2011.5.25.316.1.1.4.1
IPFPM authenticaiton configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpAuthEntry  

hwIpfpmMcpAuthKeyId 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.1
Identification of the authentication key.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hwIpfpmMcpAuthType 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.2
Authentication type of the key. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmAuthType  

hwIpfpmMcpAuthKey 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.3
The password used as an IPFPM authentication key.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..432)  

hwIpfpmMcpAuthRowStatus 1.3.6.1.4.1.2011.5.25.316.1.1.4.1.4
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmMcpInstTable 1.3.6.1.4.1.2011.5.25.316.1.1.5
The table contains attribute of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpInstEntry

hwIpfpmMcpInstEntry 1.3.6.1.4.1.2011.5.25.316.1.1.5.1
IPFPM configuration information for a particular MCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpInstEntry  

hwIpfpmMcpInstId 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.1
Identification of the test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8355838 | 16711681..16777214  

hwIpfpmMcpInstDesc 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.2
Description of the test instance. if the string length is 0, it represents that it is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwIpfpmMcpLossRatioUpThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.3
This value divided by 1000000 is the upper threshold of loss ratio(%) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100000000  

hwIpfpmMcpLossRatioLowThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.4
This value divided by 1000000 is the lower threshold of loss ratio(%) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100000000  

hwIpfpmMcpOneDelayUpThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.5
Upper threshold of one-way delay(us) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwIpfpmMcpOneDelayLowThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.6
Lower threshold of one-way delay(us) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwIpfpmMcpTwoDelayUpThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.7
Upper threshold of two-way delay(us) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwIpfpmMcpTwoDelayLowThres 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.8
Lower threshold of two-way delay(us) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hwIpfpmMcpMeasureEnable 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.9
This object indicates that the MCP instance measure function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-create
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmMcpInstRowStatus 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.10
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmMcpInstType 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.11
This object indicates that the MCP instance type. 'unicast(0)' means unicast measurement instance. 'multicastsrc(1)' means multicast measurement source instance. 'multicastrecv(2)' means multicast measurement receiver instance.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmInstType  

hwIpfpmMcpSourceInstId 1.3.6.1.4.1.2011.5.25.316.1.1.5.1.12
This object indicates the source instance of multicastrecv. This object is only valid when hwIpfpmMcpInstType is 'multicastrecv(2)'. We can ingore this object value when hwIpfpmMcpInstType is not 'multicastrecv(2)'.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 16711681..16777214  

hwIpfpmMcpDcpTable 1.3.6.1.4.1.2011.5.25.316.1.1.6
The table describe the DCPs belonging to MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpDcpEntry

hwIpfpmMcpDcpEntry 1.3.6.1.4.1.2011.5.25.316.1.1.6.1
IPFPM DCPs information for a particular MCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpDcpEntry  

hwIpfpmMcpDcpId 1.3.6.1.4.1.2011.5.25.316.1.1.6.1.1
Identification of DCP which belongs to the test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpDcpRowStatus 1.3.6.1.4.1.2011.5.25.316.1.1.6.1.2
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmMcpAchTable 1.3.6.1.4.1.2011.5.25.316.1.1.7
The table describe the ACHs(Atomic Closed Hop) belonging to MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpAchEntry

hwIpfpmMcpAchEntry 1.3.6.1.4.1.2011.5.25.316.1.1.7.1
IPFPM ACHs(Atomic Closed Hop) information for a particular MCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpAchEntry  

hwIpfpmMcpAchId 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.1
The object indicates the identification of the ACH.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

hwIpfpmMcpFlowType 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.2
The object indicates the flow that the ACH monitors is 'forward(1)' or 'backward(2)', 'bidirectional(3)'. The value none(0) represents that it is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmMcpFlowType  

hwIpfpmMcpAchRowStatus 1.3.6.1.4.1.2011.5.25.316.1.1.7.1.3
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmMcpTlpTable 1.3.6.1.4.1.2011.5.25.316.1.1.8
The table describe the TLPs(Target Logical Port) belonging to MCP ACHs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpTlpEntry

hwIpfpmMcpTlpEntry 1.3.6.1.4.1.2011.5.25.316.1.1.8.1
IPFPM TLPs(Target Logical Port) information for a particular MCP ACH.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpTlpEntry  

hwIpfpmMcpTlpRole 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.1
The object indicates the TLP belongs to 'in-group(1)' or 'out-group(2)' of the ACH.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWIpfpmMcpTlpRole  

hwIpfpmMcpTlpDcpId 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.2
The object indicates the dcp which the tlp belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpTlpId 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.3
The object indicates the identification of the TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16777215  

hwIpfpmMcpTlpRowStatus 1.3.6.1.4.1.2011.5.25.316.1.1.8.1.4
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmMcpSrcInstReferQueryTable 1.3.6.1.4.1.2011.5.25.316.1.1.9
The table describes the information of multicast source instance referred by some multicast receiver instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpSrcInstReferQueryEntry

hwIpfpmMcpSrcInstReferQueryEntry 1.3.6.1.4.1.2011.5.25.316.1.1.9.1
The information is that the multicast source instance referred by some multicast receiver instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpSrcInstReferQueryEntry  

hwIpfpmMcpSrcInstReferCnt 1.3.6.1.4.1.2011.5.25.316.1.1.9.1.1
The object indicates the counter that the multicast source instance referred by some multicast receiver instances.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpStatisticsTable 1.3.6.1.4.1.2011.5.25.316.1.2.1
OBJECT IDENTIFIER    

hwIpfpmMcpInstSpec 1.3.6.1.4.1.2011.5.25.316.1.2.1.1
This object indicates the global instance specification of MCP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpInstCurNum 1.3.6.1.4.1.2011.5.25.316.1.2.1.2
This object indicates the current instance number of MCP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpInstTlpMaxNum 1.3.6.1.4.1.2011.5.25.316.1.2.1.3
This object indicates the maximum number of all instance TLP can be managed by MCP. -1 means unused of this number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpAchMaxNum 1.3.6.1.4.1.2011.5.25.316.1.2.1.4
This object indicates the total number of all ACH can be managed by MCP. -1 means unused of this number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpInstAchIndexTable 1.3.6.1.4.1.2011.5.25.316.1.2.3
The tables contains the index of MCP test instances and ACH.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpInstAchIndexEntry

hwIpfpmMcpInstAchIndexEntry 1.3.6.1.4.1.2011.5.25.316.1.2.3.1
Index of a particular test instance and ACH.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpInstAchIndexEntry  

hwIpfpmMcpSeqNo 1.3.6.1.4.1.2011.5.25.316.1.2.3.1.1
Sequence of a particular test instance and ACH.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpLossStatsTable 1.3.6.1.4.1.2011.5.25.316.1.2.4
The tables contains loss measure statistics of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpLossStatsEntry

hwIpfpmMcpLossStatsEntry 1.3.6.1.4.1.2011.5.25.316.1.2.4.1
Loss measure statistics of an interval for a particular test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpLossStatsEntry  

hwIpfpmMcpSeqNoHigh 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.1
High 32-bit of the hwIpfpmMcpSeqNo.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwIpfpmMcpSeqNoLow 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.2
Low 32-bit of the hwIpfpmMcpSeqNo.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwIpfpmMcpLossErrInfo 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.3
The error code to indicate the validity and the invalidation reason of an interval's loss measure statistics.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmStatErrInfo  

hwIpfpmMcpForwardLossPkts 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.4
The absolute value of loss packets of forward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpForwardLossPktsSign 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.5
The sign of loss packets of forward flow measurement. 1 means positive number, -1 means negative number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardLossBytes 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.6
The absolute value of loss bytes of forward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpForwardLossBytesSign 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.7
The sign of loss bytes of forward flow measurement. 1 means positive number, -1 means negative number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardPkts 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.8
The packets of forward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpForwardBytes 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.9
The bytes of forward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpForwardLossRatio 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.10
This value divided by 1000000 is the loss ratio(%) of forward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardLossPkts 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.11
The absolute value of loss packets of backward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpBackwardLossPktsSign 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.12
The sign of loss loss packets of backward flow measurement. 1 means positive number, -1 means negative number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardLossBytes 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.13
The absolute value of loss bytes of backward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpBackwardLossBytesSign 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.14
The sign of loss bytes of backward flow measurement. 1 means positive number, -1 means negative number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardPkts 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.15
The packets of backward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpBackwardBytes 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.16
The bytes of backward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwIpfpmMcpBackwardLossRatio 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.17
This value divided by 1000000 is the loss ratio(%) of backward flow measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardLossMMSType 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.18
This value indicate multicastsrc type is 'master(0)' or 'slave(1)'.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmMMSType  

hwIpfpmMcpForwardLossMMSSwitch 1.3.6.1.4.1.2011.5.25.316.1.2.4.1.19
This value indicate whether multicastsrc switched in this period.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwIpfpmMcpOneDelayStatTable 1.3.6.1.4.1.2011.5.25.316.1.2.5
The tables contains one-way delay measure statistics of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpOneDelayStatEntry

hwIpfpmMcpOneDelayStatEntry 1.3.6.1.4.1.2011.5.25.316.1.2.5.1
One-way delay measure statistics of an interval for a particular test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpOneDelayStatEntry  

hwIpfpmMcpOneDelayErrInfo 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.1
The error code to indicate the validity and the invalidation reason of an interval's one-way delay measure statistics.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmStatErrInfo  

hwIpfpmMcpForwardOneDelay 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.2
The one-way delay(us) of forward flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardOneDelayVariation 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.3
The one-way delay variation(us) of forward flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardOneDelay 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.4
The one-way delay(us) of backward flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardOneDelayVariation 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.5
The one-way delay variation(us) of backward flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardOneDelayMMSType 1.3.6.1.4.1.2011.5.25.316.1.2.5.1.6
This value indicate multicastsrc type is 'master(0)' or 'slave(1)'.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmMMSType  

hwIpfpmMcpTwoDelayStatTable 1.3.6.1.4.1.2011.5.25.316.1.2.6
The tables contains two-way delay measure statistics of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpTwoDelayStatEntry

hwIpfpmMcpTwoDelayStatEntry 1.3.6.1.4.1.2011.5.25.316.1.2.6.1
Two-way delay measure statistics of an interval for a particular test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpTwoDelayStatEntry  

hwIpfpmMcpTwoDelayErrInfo 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.1
The error code to indicate the validity and the invalidation reason of an interval's two-way delay measure statistics.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmStatErrInfo  

hwIpfpmMcpTwoDelay 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.2
The two-way delay(us) of monitored flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpTwoDelayVariation 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.3
The two-way delay variation(us) of monitored flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardDelay 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.4
The forward flow delay(us) in two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardDelayVariation 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.5
The forward flow variation(us) in two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelay 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.6
The backward flow delay(us) in two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelayVariation 1.3.6.1.4.1.2011.5.25.316.1.2.6.1.7
The backward flow variation(us) in two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpOneDelayMultiStatTable 1.3.6.1.4.1.2011.5.25.316.1.2.7
The tables contains multi-in-point one-way delay measure statistics of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpOneDelayMultiStatEntry

hwIpfpmMcpOneDelayMultiStatEntry 1.3.6.1.4.1.2011.5.25.316.1.2.7.1
Multi-in-point one-way delay measure statistics of an interval for a particular test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpOneDelayMultiStatEntry  

hwIpfpmMcpOneDelayFlowType 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.1
The flow type for multi-in-point one-delay.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWIpfpmMcpFlowType  

hwIpfpmMcpOneDelayMultiSrcDCP 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.2
The multi-in-point one-way delay source DCP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpOneDelayMultiSrcTLP 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.3
The multi-in-point one-way delay source TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpOneDelayMultiDesDCP 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.4
The multi-in-point one-way delay destination DCP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpOneDelayMultiDesTLP 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.5
The multi-in-point one-way delay destination TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpOneDelayMultiErrInfo 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.6
The error code to indicate the validity and the invalidation reason of an interval's multi-in-point one-way delay measure statistics.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmStatErrInfo  

hwIpfpmMcpOneDelayMulti 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.7
The multi-in-point one-way delay(us).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpOneDelayMultiVariation 1.3.6.1.4.1.2011.5.25.316.1.2.7.1.8
The multi-in-point one-way delay variation(us).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpTwoDelayMultiStatTable 1.3.6.1.4.1.2011.5.25.316.1.2.8
The tables contains multi-in-point two-way delay measure statistics of MCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmMcpTwoDelayMultiStatEntry

hwIpfpmMcpTwoDelayMultiStatEntry 1.3.6.1.4.1.2011.5.25.316.1.2.8.1
Multi-in-point two-way delay measure statistics of an interval for a particular test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmMcpTwoDelayMultiStatEntry  

hwIpfpmMcpForwardDelayMultiSrcDCP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.1
The multi-in-point two-way delay source DCP of forward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpForwardDelayMultiSrcTLP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.2
The multi-in-point two-way delay source TLP of forward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardDelayMultiDesDCP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.3
The multi-in-point two-way delay destination DCP of forward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpForwardDelayMultiDesTLP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.4
The multi-in-point two-way delay destination TLP of forward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelayMultiSrcDCP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.5
The multi-in-point two-way delay source DCP of backward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpBackwardDelayMultiSrcTLP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.6
The multi-in-point two-way delay source TLP of backward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelayMultiDesDCP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.7
The multi-in-point two-way delay destination DCP of backward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmMcpBackwardDelayMultiDesTLP 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.8
The multi-in-point two-way delay destination TLP of backward flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpTwoDelayMultiErrInfo 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.9
The error code to indicate the validity and the invalidation reason of an interval's multi-in-point two-way delay measure statistics.
Status: current Access: read-only
OBJECT-TYPE    
  HWIpfpmStatErrInfo  

hwIpfpmMcpTwoDelayMulti 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.10
The multi-in-point two-way delay(us) of monitored flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpTwoDelayMultiVariation 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.11
The multi-in-point two-way delay variation(us) of monitored flow.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardDelayMulti 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.12
The forward flow delay(us) in multi-in-point two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpForwardDelayMultiVariation 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.13
The forward flow variation(us) in multi-in-point two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelayMulti 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.14
The backward flow delay(us) in multi-in-point two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmMcpBackwardDelayMultiVariation 1.3.6.1.4.1.2011.5.25.316.1.2.8.1.15
The backward flow variation(us) in multi-in-point two-way delay measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpGlobalTable 1.3.6.1.4.1.2011.5.25.316.2.1.1
OBJECT IDENTIFIER    

hwIpfpmDcpEnable 1.3.6.1.4.1.2011.5.25.316.2.1.1.1
This object indicates that the DCP (Data Collecting Point) function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmDcpId 1.3.6.1.4.1.2011.5.25.316.2.1.1.2
The value of this object indicates the identification of DCP. The value 0.0.0.0 represents that it is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpMeasureColorFlag 1.3.6.1.4.1.2011.5.25.316.2.1.1.3
This string object indicates the bits of an IP packet used for color measurement. the length of string is 3,first and second character range is <1-6>, third character range is <0-6>. the three characters can not same. The character '0' represents none flag bit. The character '1' represents the bit0 of the FLAGS byte. The character '2' represents the bit3 of the TOS byte. The character '3' represents the bit4 of the TOS byte. The character '4' represents the bit5 of the TOS byte. The character '5' represents the bit6 of the TOS byte. The character '6' represents the bit7 of the TOS byte. the first character represents loss measurement color-bit, the second character represents delay measurement color-bit, the third character represents multicast measurement color-bit.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3..3)  

hwIpfpmDcpMcpId 1.3.6.1.4.1.2011.5.25.316.2.1.1.6
Identification of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpId' to. The value 0.0.0.0 represents that it is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpMcpPort 1.3.6.1.4.1.2011.5.25.316.2.1.1.7
The listening port of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpPort' to. It need setting 'hwIpfpmDcpMcpId' first before setting this object.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1024..65535  

hwIpfpmDcpMcpVpnName 1.3.6.1.4.1.2011.5.25.316.2.1.1.8
The name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwIpfpmDcpMcpVpnType 1.3.6.1.4.1.2011.5.25.316.2.1.1.9
The type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmVpnType  

hwIpfpmPeriodSource 1.3.6.1.4.1.2011.5.25.316.2.1.1.10
The clock source using by period.Priority should be given to the use of this setting in period calculation.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmClockSoure  

hwIpfpmDcpAuthTable 1.3.6.1.4.1.2011.5.25.316.2.1.7
The table contains authentication of DCP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpAuthEntry

hwIpfpmDcpAuthEntry 1.3.6.1.4.1.2011.5.25.316.2.1.7.1
IPFPM authentication information for DCP
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpAuthEntry  

hwIpfpmDcpAuthKeyId 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.1
Identification of the DCP authentication.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hwIpfpmDcpAuthType 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.2
Authentication type of the DCP. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmAuthType  

hwIpfpmDcpAuthKey 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.3
The password used as an IPFPM authentication key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..432)  

hwIpfpmDcpAuthRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.7.1.4
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpInstTable 1.3.6.1.4.1.2011.5.25.316.2.1.8
The table contains attribute of DCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpInstEntry

hwIpfpmDcpInstEntry 1.3.6.1.4.1.2011.5.25.316.2.1.8.1
IPFPM configuration information for a particular DCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpInstEntry  

hwIpfpmDcpInstId 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.1
Identification of the test instance.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..8355838 | 16711681..16777214  

hwIpfpmDcpInstDesc 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.2
Description of the test instance. if the string length is 0, it represents that it is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwIpfpmDcpInstMcpId 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.3
Identification of the MCP that DCP reports measure data of this test instance to. The value 0.0.0.0 represents that it is not configured
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpInstMcpPort 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.4
The listening port of the MCP that DCP reports measure data of this test instance to. It need setting 'hwIpfpmDcpInstMcpId' first before setting this object.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1024..65535  

hwIpfpmDcpInstInterval 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.5
This object indicates that interval of an test instance is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmInstIntervalType  

hwIpfpmDcpInstRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.6
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpInstType 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.7
type of the test instance.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmInstType  

hwIpfpmDcpSourceInstId 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.8
Identification of the source instance.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 16711681..16777214  

hwIpfpmDcpInstMcpVpnName 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.9
The name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwIpfpmDcpInstMcpVpnType 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.10
The type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmVpnType  

hwIpfpmDcpInstGroupId 1.3.6.1.4.1.2011.5.25.316.2.1.8.1.11
The group identification of the test instance.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..8355838  

hwIpfpmDcpInstAuthTable 1.3.6.1.4.1.2011.5.25.316.2.1.9
The table contains authentication of DCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpInstAuthEntry

hwIpfpmDcpInstAuthEntry 1.3.6.1.4.1.2011.5.25.316.2.1.9.1
IPFPM authentication information for a particular DCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpInstAuthEntry  

hwIpfpmDcpInstAuthKeyId 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.1
Identification of the DCP authentication.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hwIpfpmDcpInstAuthType 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.2
Authentication type of DCP instance authentication. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured. If this object is not configured and object 'hwIpfpmDcpAuthType' is configured, then this instance uses 'hwIpfpmDcpInstAuthType' and 'hwIpfpmDcpInstAuthKey' as its authentication.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmAuthType  

hwIpfpmDcpInstAuthKey 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.3
The password used as an DCP test instance authentication key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..432)  

hwIpfpmDcpInstAuthRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.9.1.4
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpFlowTable 1.3.6.1.4.1.2011.5.25.316.2.1.10
The table contains flow attribute of DCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpFlowEntry

hwIpfpmDcpFlowEntry 1.3.6.1.4.1.2011.5.25.316.2.1.10.1
IPFPM configuration information for a particular DCP test instance flow.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpFlowEntry  

hwIpfpmDcpFlowType 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.1
This object indicates that the flow is 'forward(1)' or 'backward(2)' or 'bidirectional(3)'.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HWIpfpmFlowType  

hwIpfpmDcpFlowProtocol 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.2
This object indicates the protocol specified as the flow feature. 'hwIpfpmDcpFlowSrcPortBgn', 'hwIpfpmDcpFlowSrcPortEnd', 'hwIpfpmDcpFlowDstPortBgn', and 'hwIpfpmDcpFlowDstPortEnd' can be configured only when the value is 6(tcp) or 17(udp). The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

hwIpfpmDcpFlowDscp 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.3
This object indicates the DSCP specified as the flow feature. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..63  

hwIpfpmDcpFlowSrcAddr 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.4
This object indicates the source ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpFlowSrcMaskLen 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.5
This object indicates the source ip mask length specified as the flow feature.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..32  

hwIpfpmDcpFlowDstAddr 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.6
This object indicates the destination ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpFlowDstMaskLen 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.7
This object indicates the destination ip mask length specified as the flow feature.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..32  

hwIpfpmDcpFlowSrcPortBgn 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.8
This object indicates the begin value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hwIpfpmDcpFlowSrcPortEnd 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.9
This object indicates the end value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hwIpfpmDcpFlowDstPortBgn 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.10
This object indicates the begin value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hwIpfpmDcpFlowDstPortEnd 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.11
This object indicates the end value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hwIpfpmDcpFlowRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.12
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpFlowOuterSrcAddr 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.13
This object indicates the outer source ip address specified as the flow feature. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpFlowOuterDstAddr 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.14
This object indicates the outer destination ip address specified as the flow feature. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpFlowForwardGtpTeid 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.15
This object indicates the value of forward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967294  

hwIpfpmDcpFlowBackwardGtpTeid 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.16
This object indicates the value of backward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967294  

hwIpfpmDcpFlowVxlan 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.17
The Vxlan of the flow feature. The value false(2) represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpFlowVni 1.3.6.1.4.1.2011.5.25.316.2.1.10.1.18
This object indicates the value of vni specified as the flow feature. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16000000  

hwIpfpmDcpInstTlpTable 1.3.6.1.4.1.2011.5.25.316.2.1.11
The table contains attribute of TLPs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpInstTlpEntry

hwIpfpmDcpInstTlpEntry 1.3.6.1.4.1.2011.5.25.316.2.1.11.1
IPFPM configuration information for a particular TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpInstTlpEntry  

hwIpfpmDcpInstTlpRole 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.1
The object indicates the TLP position 'in-point(1)' or 'out-point(2) or 'mid-point(3)'.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmTlpRole  

hwIpfpmDcpInstTlpFlowType 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.2
The object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRole' is 'mid-point(3)'. The value 'null(0)' represents that this flow is not configured under the instance.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmFlowType  

hwIpfpmDcpInstTlpDirec 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.3
The object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmFlowTlpDirec  

hwIpfpmDcpInstTlpVpnLabel 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.4
The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpCtrlWordFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.5
The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpLspLabel 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.6
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpL2VpnFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.7
The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpTpId 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.8
The tpid for vlan. The value range is from '600' to 'FFFF'.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(3..4)  

hwIpfpmDcpInstTlpRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.9
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpInstTlpMultiSrcType 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.10
The object indicates the type of multicastsrc 'master(0)'or 'slave(1)'.
Status: current Access: read-create
OBJECT-TYPE    
  HWIpfpmMMSType  

hwIpfpmDcpInstTlpFlowLabelFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.11
This value indicate whether the flow-label is configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpLspLabel2 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.12
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -2..1048575  

hwIpfpmDcpInstTlpLspLabel3 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.13
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpOuterVlan 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.14
The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwIpfpmDcpInstTlpInnerVlan 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.15
The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwIpfpmDcpInstTlpBackwardVpnLabel 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.16
The VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpBackwardCtrlWordFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.17
The control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpBackwardLspLabel 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.18
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpBackwardLspLabel2 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.19
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -2..1048575  

hwIpfpmDcpInstTlpBackwardLspLabel3 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.20
The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1..1048575  

hwIpfpmDcpInstTlpBackwardL2VpnFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.21
The L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpBackwardFlowLabelFlag 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.22
This value indicate whether the flow-label is configured.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwIpfpmDcpInstTlpBackwardOuterVlan 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.23
The outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwIpfpmDcpInstTlpBackwardInnerVlan 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.24
The inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwIpfpmDcpInstTlpBackwardTpId 1.3.6.1.4.1.2011.5.25.316.2.1.11.1.25
The tpid for vlan. The value range is from '600' to 'FFFF'.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(3..4)  

hwIpfpmDcpLossMeasTable 1.3.6.1.4.1.2011.5.25.316.2.1.12
The table contains loss measure information of DCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpLossMeasEntry

hwIpfpmDcpLossMeasEntry 1.3.6.1.4.1.2011.5.25.316.2.1.12.1
IPFPM loss measure configuration information for a particular DCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpLossMeasEntry  

hwIpfpmDcpLossEnable 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.1
This object indicates that the on-demand loss measure function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmDcpLossContEnable 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.2
This object indicates that the continual loss measure function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmDcpLossTimeRange 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.3
The time range in which the on-demand loss measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmMeasTimeRangeType  

hwIpfpmDcpLossTlpRole 1.3.6.1.4.1.2011.5.25.316.2.1.12.1.4
The type of TLP that loss measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWIpfpmLossTlpRole  

hwIpfpmDcpDelayMeasTable 1.3.6.1.4.1.2011.5.25.316.2.1.13
The table contains delay measure information of DCP test instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpDelayMeasEntry

hwIpfpmDcpDelayMeasEntry 1.3.6.1.4.1.2011.5.25.316.2.1.13.1
IPFPM delay measure configuration information for a particular DCP test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpDelayMeasEntry  

hwIpfpmDcpDelayEnable 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.1
This object indicates that the on-demand delay measure function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmDcpDelayContEnable 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.2
This object indicates that the continual delay measure function is 'enabled(1)' or 'disabled(2)'.
Status: current Access: read-write
OBJECT-TYPE    
  HWEnabledStatus  

hwIpfpmDcpDelayMeasType 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.3
The type of delay measure. The enumeration values include 'oneway(1)' and 'twoway(2)'. The value 'null(0)' represents that this object is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmDelayMeasType  

hwIpfpmDcpDelayTimeRange 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.4
The time range in which the on-demand delay measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  HWIpfpmMeasTimeRangeType  

hwIpfpmDcpDelayTlpRole 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.5
The type of TLP that delay measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWIpfpmDelayTlpRole  

hwIpfpmDcpDelayForwardTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.6
The ingress TLP of the flow for one-way delay measure or the ingress TLP of the forward flow for two-way delay measure. The value 0 represents that this object is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16777215  

hwIpfpmDcpDelayBackwardTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.13.1.7
The ingress TLP of the backward flow for two-way delay measure. The value 0 represents that this object is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16777215  

hwIpfpmDcpTlpTable 1.3.6.1.4.1.2011.5.25.316.2.1.14
The table contains attribute of TLPs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpTlpEntry

hwIpfpmDcpTlpEntry 1.3.6.1.4.1.2011.5.25.316.2.1.14.1
IPFPM configuration information for a particular TLP on interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpTlpEntry  

hwIpfpmDcpTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.1
Identification of TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16777215  

hwIpfpmDcpTlpIfIndex 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.2
The index of the port that the TLP configured on.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

hwIpfpmDcpTlpRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.3
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpTlpVlanId 1.3.6.1.4.1.2011.5.25.316.2.1.14.1.4
The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094 | 65535  

hwIpfpmDcpTlpQueryTable 1.3.6.1.4.1.2011.5.25.316.2.1.15
The table contains the query interface ifindex and TLP ID with the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpTlpQueryEntry

hwIpfpmDcpTlpQueryEntry 1.3.6.1.4.1.2011.5.25.316.2.1.15.1
The TLP information which is configured with the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpTlpQueryEntry  

hwIpfpmDcpTlpQueryIfIndex 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.1
The interface index which is configured with TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwIpfpmDcpTlpQueryTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.2
The TLP ID which is configured on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16777215  

hwIpfpmDcpTlpQueryVlanId 1.3.6.1.4.1.2011.5.25.316.2.1.15.1.3
The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094 | 65535  

hwIpfpmDcpSrcInstReferQueryTable 1.3.6.1.4.1.2011.5.25.316.2.1.16
The table describes the information of multicast source instance referred by some multicast receiver instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpSrcInstReferQueryEntry

hwIpfpmDcpSrcInstReferQueryEntry 1.3.6.1.4.1.2011.5.25.316.2.1.16.1
The information is that the multicast source instance referred by some multicast receiver instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpSrcInstReferQueryEntry  

hwIpfpmDcpSrcInstReferCnt 1.3.6.1.4.1.2011.5.25.316.2.1.16.1.1
The object indicates the counter that the multicast source instance referred by some multicast receiver instances.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwIpfpmTlpExceedBoardId 1.3.6.1.4.1.2011.5.25.316.2.2.1
The board ID that the tlp exceed the threshold.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwIpfpmTlpNumber 1.3.6.1.4.1.2011.5.25.316.2.2.2
The number of tlp.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwIpfpmTlpThreshold 1.3.6.1.4.1.2011.5.25.316.2.2.3
The threshold of tlp.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpTlpQueryExtTable 1.3.6.1.4.1.2011.5.25.316.2.1.17
The table contains the query interface ifindex and TLP ID with the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpTlpQueryExtEntry

hwIpfpmDcpTlpQueryExtEntry 1.3.6.1.4.1.2011.5.25.316.2.1.17.1
The TLP information which is configured with the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpTlpQueryExtEntry  

hwIpfpmDcpTlpQueryExtIfIndex 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.1
The interface index which is configured with TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwIpfpmDcpTlpQueryExtTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.2
The TLP ID which is configured on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16777215  

hwIpfpmDcpTlpQueryExtVlanId 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.3
The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094 | 65535  

hwIpfpmDcpTlpQueryExtOntId 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.4
This object indicates the ONT ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpTlpQueryExtOntPortType 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.5
This object indicates the ONT port's type. Options: 1. eth (47)) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER eth(47), invalid(-1)  

hwIpfpmDcpTlpQueryExtOntPortId 1.3.6.1.4.1.2011.5.25.316.2.1.17.1.6
This object indicates the ONT port ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpTlpExtTable 1.3.6.1.4.1.2011.5.25.316.2.1.18
The table contains attribute of TLPs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpTlpExtEntry

hwIpfpmDcpTlpExtEntry 1.3.6.1.4.1.2011.5.25.316.2.1.18.1
IPFPM configuration information for a particular TLP on interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpTlpExtEntry  

hwIpfpmDcpExtTlpId 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.1
Identification of TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16777215  

hwIpfpmDcpTlpExtIfIndex 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.2
The index of the port that the TLP configured on.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpTlpExtRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.3
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmDcpTlpExtVlanId 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.4
The VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094 | 65535  

hwIpfpmDcpTlpExtOntId 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.5
This object indicates the ONT ID. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpTlpExtOntPortType 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.6
This object indicates the ONT port's type. Options: 1. eth (47)) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched. DEFVAL { -1 } .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER eth(47), invalid(-1)  

hwIpfpmDcpTlpExtOntPortId 1.3.6.1.4.1.2011.5.25.316.2.1.18.1.7
This object indicates the ONT port ID. The value -1 represents that this object is not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwIpfpmDcpInstTlpNHTable 1.3.6.1.4.1.2011.5.25.316.2.1.19
IPFPM nexthop configuration information for a particular TLP of the test instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIpfpmDcpInstTlpNHEntry

hwIpfpmDcpInstTlpNHEntry 1.3.6.1.4.1.2011.5.25.316.2.1.19.1
IPFPM nexthop configuration information for a particular TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIpfpmDcpInstTlpNHEntry  

hwIpfpmDcpNexthopIp 1.3.6.1.4.1.2011.5.25.316.2.1.19.1.1
The object indicates the nexthop information for a particular TLP.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwIpfpmDcpInstTlpNHRowStatus 1.3.6.1.4.1.2011.5.25.316.2.1.19.1.2
Used for controlling the creation and deletion of this row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwIpfpmLossRatioExceed 1.3.6.1.4.1.2011.5.25.316.3.1
A hwIpfpmLossRatioExceed trap is sent when the loss ratio of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmLossRatioRecovery 1.3.6.1.4.1.2011.5.25.316.3.2
A hwIpfpmLossRatioRecovery trap is sent when the loss ratio of IPFPM test instance is under the lower threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmOneDelayExceed 1.3.6.1.4.1.2011.5.25.316.3.3
A hwIpfpmOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmOneDelayRecovery 1.3.6.1.4.1.2011.5.25.316.3.4
A hwIpfpmOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmTwoDelayExceed 1.3.6.1.4.1.2011.5.25.316.3.5
A hwIpfpmTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmTwoDelayRecovery 1.3.6.1.4.1.2011.5.25.316.3.6
A hwIpfpmTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmDcpFlowConflict 1.3.6.1.4.1.2011.5.25.316.3.7
A hwIpfpmDcpFlowConflict trap is sent when the flow configuration conflicts with another existing flow configuration. The first hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the specified flow. The second hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the existing flow.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmTlpExceed 1.3.6.1.4.1.2011.5.25.316.3.8
A hwIpfpmTlpExceed trap is sent when the number of board tlp exceeds the threshold.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmTlpRecovery 1.3.6.1.4.1.2011.5.25.316.3.9
A hwIpfpmTlpRecovery trap is sent when the number of board tlp is under the threshold.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmMultiOneDelayExceed 1.3.6.1.4.1.2011.5.25.316.3.10
A hwIpfpmMultiOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi one-way delay for a period.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmMultiOneDelayRecovery 1.3.6.1.4.1.2011.5.25.316.3.11
A hwIpfpmMultiOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmMultiTwoDelayExceed 1.3.6.1.4.1.2011.5.25.316.3.12
A hwIpfpmMultiTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi two-way delay for a period.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmMultiTwoDelayRecovery 1.3.6.1.4.1.2011.5.25.316.3.13
A hwIpfpmMultiTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwIpfpmCompliances 1.3.6.1.4.1.2011.5.25.316.4.1
OBJECT IDENTIFIER    

hwIpfpmGroups 1.3.6.1.4.1.2011.5.25.316.4.2
OBJECT IDENTIFIER    

hwIpfpmCompliance 1.3.6.1.4.1.2011.5.25.316.4.1.1
The compliance statement for entities which implement the IPFPM MIB.
Status: current Access: read-create
MODULE-COMPLIANCE    

hwIpfpmMcpConfigGroup 1.3.6.1.4.1.2011.5.25.316.4.2.1
The collection of objects which are used to configure the IPFPM MCP behavior.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmMcpInstConfigGroup 1.3.6.1.4.1.2011.5.25.316.4.2.2
The collection of objects which are used to configure the IPFPM MCP test instance behavior.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmMcpStatsGroup 1.3.6.1.4.1.2011.5.25.316.4.2.3
The collection of objects which are used to represent the IPFPM test instance statistics.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmDcpConfigGroup 1.3.6.1.4.1.2011.5.25.316.4.2.4
The collection of objects which are used to configure the IPFPM DCP behavior.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmDcpInstConfigGroup 1.3.6.1.4.1.2011.5.25.316.4.2.5
The collection of objects which are used to configure the IPFPM DCP test instance behavior.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmDcpTlpConfigGroup 1.3.6.1.4.1.2011.5.25.316.4.2.6
The collection of objects which are used to configure the IPFPM TLP behavior.
Status: current Access: read-create
OBJECT-GROUP    

hwIpfpmTrapsGroup 1.3.6.1.4.1.2011.5.25.316.4.2.7
The collection of traps used to indicate that the measured network performance is in fault or not.
Status: current Access: read-create
NOTIFICATION-GROUP    

hwIpfpmMcpMultiDelayStatsGroup 1.3.6.1.4.1.2011.5.25.316.4.2.8
The collection of objects which are used to represent the IPFPM test instance statistics for multi-in-point delay measurement
Status: current Access: read-create
OBJECT-GROUP