HUAWEI-ENTITY-TRAP-MIB

File: HUAWEI-ENTITY-TRAP-MIB.mib (65934 bytes)

Imported modules

HUAWEI-ENTITY-EXTENT-MIB RFC1213-MIB ENTITY-MIB
HUAWEI-BASE-TRAP-MIB IF-MIB HUAWEI-MIB
IANA-ITU-ALARM-TC-MIB SNMPv2-CONF SNMPv2-TC
SNMPv2-SMI

Imported symbols

hwEntityOperStatus ifOperStatus ifAdminStatus
entPhysicalIndex entPhysicalName hwBaseTrapSeverity
hwBaseTrapProbableCause hwBaseTrapEventType ifIndex
ifName hwDatacomm IANAItuProbableCause
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
TEXTUAL-CONVENTION MacAddress Integer32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE

Defined Types

HwEntityThresholdEntry  
SEQUENCE    
  hwEntityThresholdType INTEGER
  hwEntityThresholdValue Integer32
  hwEntityThresholdCurrent Integer32
  hwEntityThresholdCritical Integer32
  hwEntityThresholdWarning Integer32

Defined Values

hwEntityTrapMIB 1.3.6.1.4.1.2011.5.25.219
This is the base trap definition for DataCom.
MODULE-IDENTITY    

hwEntityTrapObject 1.3.6.1.4.1.2011.5.25.219.1
OBJECT IDENTIFIER    

hwEntityPhysicalIndex 1.3.6.1.4.1.2011.5.25.219.1.1
The index of physical.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwEntityTrapEntType 1.3.6.1.4.1.2011.5.25.219.1.2
The entity type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mpu(1), lpu(2), sfu(3), pic(4), cfcard(5), ofc(6)  

hwEntityTrapFaultID 1.3.6.1.4.1.2011.5.25.219.1.3
To describe the fault id of trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IANAItuProbableCause  

hwEntityCommunicateType 1.3.6.1.4.1.2011.5.25.219.1.4
The communicate type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER controlChannel(1), monitorChannel(2), clockChannel(3), dataChannel(4)  

hwEntityThresholdTable 1.3.6.1.4.1.2011.5.25.219.1.5
A table to config the threshold of each sensor.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwEntityThresholdEntry

hwEntityThresholdEntry 1.3.6.1.4.1.2011.5.25.219.1.5.1
The entry of threshold table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwEntityThresholdEntry  

hwEntityThresholdType 1.3.6.1.4.1.2011.5.25.219.1.5.1.1
The abnormal type for temperature, voltage, humidity......
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER riseOver(1), fallBelow(2)  

hwEntityThresholdValue 1.3.6.1.4.1.2011.5.25.219.1.5.1.2
The threshold value of temperature, humidity ,fog ......
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwEntityThresholdCurrent 1.3.6.1.4.1.2011.5.25.219.1.5.1.3
The current value that been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwEntityThresholdCritical 1.3.6.1.4.1.2011.5.25.219.1.5.1.4
The critical alarm threshold for critical alarm. It could be used for a more dangerous instance than hwEntityThresholdCritical.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwEntityThresholdWarning 1.3.6.1.4.1.2011.5.25.219.1.5.1.5
The warning alarm threshold for warning alarm. It could be used for a more dangerous instance than hwEntityThresholdWarning.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUserDefAlarmName 1.3.6.1.4.1.2011.5.25.219.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwUserDefChannel 1.3.6.1.4.1.2011.5.25.219.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwSoftwareVersion 1.3.6.1.4.1.2011.5.25.219.1.8
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwStartupSoftwareFileName 1.3.6.1.4.1.2011.5.25.219.1.9
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwStorageDevName 1.3.6.1.4.1.2011.5.25.219.1.10
Description.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwPortDownReason 1.3.6.1.4.1.2011.5.25.219.1.11
AUAIS: The RX detects administrative(A) unit(U) alarm(A) indication(I) signal(S). B1TCA: The RX detects b1(B1) threshold(T) crossing(C) alarm(A). B2TCA: The RX detects b2(B2) threshold(T) crossing(C) alarm(A). B3TCA: The RX detects b3(B3) threshold(T) crossing(C) alarm(A). LAIS: The RX detects line(L) alarm(A) indication(I) signal(S). LCD: The RX detects loss(L) of code-group(C) delineation(D). LOF: The RX detects loss(L) of(O) frame(F). LOM: The RX detects loss(L) of(O) multiframe(M). LOP: The RX detects loss(L) of(O) pointer(M). LOS: The RX detects loss(L) of(O) signal(S). LRDI: The RX detects line(L) remote(R) defect(D) indication(I). LREI: The RX detects line(L) remote(R) error(D) indication(I). OOF: The RX detects out(O) of(O) frame(F). PAIS: The RX detects path(P) alarm(A) indication(I) signal(S). PPLM: The RX detects path(P) payload(P) label(L) mismatch(M). PRDI: The RX detects path(P) remote(R) defect(D) indication(I). PREI: The RX detects path(P) remote(R) error(E) indication(I). PUNEQ: The RX detects path(P) unequipped(UNEQ). RDOOL: The RX detects receive(R) data(D) out(O) of(O) lock(L). RROOL: The RX detects receive(R) reference(R) out(O) of(O) lock(L). SD: The RX detects signal(S) degrade(D). SF: The RX detects signal(S) fail(F). TROOL: The TX detects transmit(T) reference(R) out(O) of(O) lock(L). WLINK: The RX detects pcs link has failed (wis mode). TRANSCEIVER_OFFLINE: The transceiver is not in position. TRANSCEIVER_FAIL: A hardware failure occurs when accessing the transceiver. TRANSCEIVER_MISMATCH: The transceiver does not match the port-mode. TRANSCEIVER_UNKNOWN: The transceiver is unknown type. PMA_LOS: The PMA(physical medium attachment) detects loss of signal. PMA_UNLOCK: The PMA(physical medium attachment) detects receive data out of lock. PCS_HIGHBER: The PCS(physical coding sublayer) enter High-BER status. PCS_UNLOCK: The PCS(physical coding sublayer) detects receive data out of lock. LOCAL_FAULT: The RX detects Local Fault signal. REMOTE_FAULT: The RX detects Remote Fault signal. NEGOTIATION_FAIL: Auto-negotiation is not successful. SOFT_FORCE_DOWN: The interface was DOWN triggered by a protocol module or was administratively shut down. GPON_ACTIVATE_FAIL: The GPON optical module failed to be detected or activated. GPON_AUTHEN_LOID_FAIL: The authentication failed because the GPON optical module does not have an LOID. GPON_AUTHEN_PASSWORD_FAIL: The authentication failed because the password is incorrect. GPON_AUTHEN_LOIDCOLLI_FAIL: The authentication failed due to LODI collision of GPON optical modules. GPON_FIBER_LINKFAULT_FAIL: The optical link failed due to link disconnection or low optical receive power. GPON_TRANSCEIVERSHUT_FAIL: The transmitter of the GPON optical module was turned off on the OLT. GPON_ABNORMALSHINE_FAIL: The GPON optical module detected light emitting abnormalities, and the transmitter was turned off. GPON_TRANSCEIVERABNORMAL: Laser is in fault state. GPON_OTHER_ALARM: The GPON optical module has other fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwEntityTrapRelativeResource 1.3.6.1.4.1.2011.5.25.219.1.12
MAC address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

hwEntityTrapReasonDescr 1.3.6.1.4.1.2011.5.25.219.1.13
Description of trap reason.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hwUsbOperType 1.3.6.1.4.1.2011.5.25.219.1.14
The staus of usb card.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwEntityTraps 1.3.6.1.4.1.2011.5.25.219.2
OBJECT IDENTIFIER    

hwChassisTrap 1.3.6.1.4.1.2011.5.25.219.2.1
OBJECT IDENTIFIER    

hwChassisRemove 1.3.6.1.4.1.2011.5.25.219.2.1.1
Chassis has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwChassisInsert 1.3.6.1.4.1.2011.5.25.219.2.1.2
Chassis has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwChassisFail 1.3.6.1.4.1.2011.5.25.219.2.1.3
Chassis become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwChassisFailResume 1.3.6.1.4.1.2011.5.25.219.2.1.4
Board resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwChassisInvalid 1.3.6.1.4.1.2011.5.25.219.2.1.5
Chassis is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwChassisInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.1.6
Chassis resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardTrap 1.3.6.1.4.1.2011.5.25.219.2.2
OBJECT IDENTIFIER    

hwBoardRemove 1.3.6.1.4.1.2011.5.25.219.2.2.1
Board has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardInsert 1.3.6.1.4.1.2011.5.25.219.2.2.2
Board has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardFail 1.3.6.1.4.1.2011.5.25.219.2.2.3
Board become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardFailResume 1.3.6.1.4.1.2011.5.25.219.2.2.4
Board resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardInvalid 1.3.6.1.4.1.2011.5.25.219.2.2.5
Board is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.2.6
Board resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardLeaveMaster 1.3.6.1.4.1.2011.5.25.219.2.2.7
MPU leave master role.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardBecomeMaster 1.3.6.1.4.1.2011.5.25.219.2.2.8
MPU become master role.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUpMicroSwitchOpen 1.3.6.1.4.1.2011.5.25.219.2.2.9
Up micro switch open.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUpMicroSwitchClose 1.3.6.1.4.1.2011.5.25.219.2.2.10
Up micro switch close.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwDownMicroSwitchOpen 1.3.6.1.4.1.2011.5.25.219.2.2.11
Down micro switch open.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwDownMicroSwitchClose 1.3.6.1.4.1.2011.5.25.219.2.2.12
Down micro switch close.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBoardPowerOff 1.3.6.1.4.1.2011.5.25.219.2.2.13
The LPU is powered off, because this LPU only supports the trunks with index 127 or smaller than 127.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBandwidthOfAllCardsExceedsThreshold 1.3.6.1.4.1.2011.5.25.219.2.2.14
The total bandwidth of all cards exceeds the forwarding capacity of system control board.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardTrap 1.3.6.1.4.1.2011.5.25.219.2.3
OBJECT IDENTIFIER    

hwCardRemove 1.3.6.1.4.1.2011.5.25.219.2.3.1
Card has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardInsert 1.3.6.1.4.1.2011.5.25.219.2.3.2
Card has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardFail 1.3.6.1.4.1.2011.5.25.219.2.3.3
Card become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardFailResume 1.3.6.1.4.1.2011.5.25.219.2.3.4
Card resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardInvalid 1.3.6.1.4.1.2011.5.25.219.2.3.5
Card is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCardInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.3.6
Card resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalTrap 1.3.6.1.4.1.2011.5.25.219.2.4
OBJECT IDENTIFIER    

hwOpticalRemove 1.3.6.1.4.1.2011.5.25.219.2.4.1
Optical Module has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalInsert 1.3.6.1.4.1.2011.5.25.219.2.4.2
Optical Module has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalFail 1.3.6.1.4.1.2011.5.25.219.2.4.3
Optical Module become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalFailResume 1.3.6.1.4.1.2011.5.25.219.2.4.4
Optical Module resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalInvalid 1.3.6.1.4.1.2011.5.25.219.2.4.5
Optical Module is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.4.6
Optical Module resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalPowerAlarm 1.3.6.1.4.1.2011.5.25.219.2.4.7
Temperature rise over or fall below the warning alarm threshold. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalPowerAlarmResume 1.3.6.1.4.1.2011.5.25.219.2.4.8
Temperature rise over or fall below the warning alarm threshold. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalUnAuthorized 1.3.6.1.4.1.2011.5.25.219.2.4.9
The optical module authentication alarm occured.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalUnAuthorizedResume 1.3.6.1.4.1.2011.5.25.219.2.4.10
The optical module authentication alarm resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLaserNoFited 1.3.6.1.4.1.2011.5.25.219.2.4.11
The laser not installed alarm occured.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLaserNoFitedResume 1.3.6.1.4.1.2011.5.25.219.2.4.12
The laser not installed alarm resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalTunableNotMatch 1.3.6.1.4.1.2011.5.25.219.2.4.13
Configuration collision occurred between wavelength setting and untunable optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwOpticalTunableNotMatchResume 1.3.6.1.4.1.2011.5.25.219.2.4.14
Configuration collision removed between wavelength setting and untunable optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerTrap 1.3.6.1.4.1.2011.5.25.219.2.5
OBJECT IDENTIFIER    

hwPowerRemove 1.3.6.1.4.1.2011.5.25.219.2.5.1
Power has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerInsert 1.3.6.1.4.1.2011.5.25.219.2.5.2
Power has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerFail 1.3.6.1.4.1.2011.5.25.219.2.5.3
Power become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerFailResume 1.3.6.1.4.1.2011.5.25.219.2.5.4
Power resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerInvalid 1.3.6.1.4.1.2011.5.25.219.2.5.5
Power is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.5.6
Power resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerUnusable 1.3.6.1.4.1.2011.5.25.219.2.5.7
Power change to unusable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerUnusableResume 1.3.6.1.4.1.2011.5.25.219.2.5.8
Power change to usable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanTrap 1.3.6.1.4.1.2011.5.25.219.2.6
OBJECT IDENTIFIER    

hwFanRemove 1.3.6.1.4.1.2011.5.25.219.2.6.1
Fan has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanInsert 1.3.6.1.4.1.2011.5.25.219.2.6.2
Fan has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanFail 1.3.6.1.4.1.2011.5.25.219.2.6.3
Fan become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanFailResume 1.3.6.1.4.1.2011.5.25.219.2.6.4
Fan resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanInvalid 1.3.6.1.4.1.2011.5.25.219.2.6.5
Fan is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.6.6
Fan resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanUnusable 1.3.6.1.4.1.2011.5.25.219.2.6.7
Fan change to unusable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFanUnusableResume 1.3.6.1.4.1.2011.5.25.219.2.6.8
Fan change to usable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdTrap 1.3.6.1.4.1.2011.5.25.219.2.7
OBJECT IDENTIFIER    

hwLcdRemove 1.3.6.1.4.1.2011.5.25.219.2.7.1
Lcd has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdInsert 1.3.6.1.4.1.2011.5.25.219.2.7.2
Lcd has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdInvalid 1.3.6.1.4.1.2011.5.25.219.2.7.3
Lcd is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.7.4
Lcd resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdUnusable 1.3.6.1.4.1.2011.5.25.219.2.7.5
Lcd change to unusable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwLcdUnusableResume 1.3.6.1.4.1.2011.5.25.219.2.7.6
Lcd change to usable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuTrap 1.3.6.1.4.1.2011.5.25.219.2.8
OBJECT IDENTIFIER    

hwCmuRemove 1.3.6.1.4.1.2011.5.25.219.2.8.1
Cmu has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuInsert 1.3.6.1.4.1.2011.5.25.219.2.8.2
Cmu has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuInvalid 1.3.6.1.4.1.2011.5.25.219.2.8.3
Cmu is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.8.4
Cmu reusme from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuUnusable 1.3.6.1.4.1.2011.5.25.219.2.8.5
Cmu change to unusable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCmuUnusableResume 1.3.6.1.4.1.2011.5.25.219.2.8.6
Cmu change to usable status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCommunicateTrap 1.3.6.1.4.1.2011.5.25.219.2.9
OBJECT IDENTIFIER    

hwCommunicateError 1.3.6.1.4.1.2011.5.25.219.2.9.1
Communication error has been detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCommunicateResume 1.3.6.1.4.1.2011.5.25.219.2.9.2
Resume from communication error situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwEnvironmentTrap 1.3.6.1.4.1.2011.5.25.219.2.10
OBJECT IDENTIFIER    

hwTempAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.1
Temperature rise over or fall below the alarm threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwTempResume 1.3.6.1.4.1.2011.5.25.219.2.10.2
Temperature back to normal level.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwHumidityAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.3
Humidity rise over or fall below the alarm threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwHumidityResume 1.3.6.1.4.1.2011.5.25.219.2.10.4
Humidity back to normal level.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwVoltAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.5
Voltage of power rise over or fall below the alarm threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwVoltResume 1.3.6.1.4.1.2011.5.25.219.2.10.6
Voltage back to normal level.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwGateAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.7
Gate switch to the alarm status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwGateResume 1.3.6.1.4.1.2011.5.25.219.2.10.8
Gate switch to normal status.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFogAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.9
Fog rise over alarm threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFogResume 1.3.6.1.4.1.2011.5.25.219.2.10.10
Fog back to normal level.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUnstableAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.11
Entity has been inserted but position unstable.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUnstableResume 1.3.6.1.4.1.2011.5.25.219.2.10.12
Resume from entity position unstable situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBrdTempAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.13
Temperature rise over or fall below the warning alarm threshold. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBrdTempResume 1.3.6.1.4.1.2011.5.25.219.2.10.14
Temperature back to normal level. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBrdTempFatalAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.15
Temperature rise over or fall below the critical alarm threshold. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBrdTempFatalResume 1.3.6.1.4.1.2011.5.25.219.2.10.16
Temperature back to normal level. Only indicate the temperature of board,card or optical module.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerFailureAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.17
Power supply failed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPowerFailureResume 1.3.6.1.4.1.2011.5.25.219.2.10.18
Power supply resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchOneAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.19
The IO-alarm 1 arise.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchOneAlarmResume 1.3.6.1.4.1.2011.5.25.219.2.10.20
The IO-alarm 1 resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchTwoAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.21
The IO-alarm 2 arise.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchTwoAlarmResume 1.3.6.1.4.1.2011.5.25.219.2.10.22
The IO-alarm 2 resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchThreeAlarm 1.3.6.1.4.1.2011.5.25.219.2.10.23
The IO-alarm 3 arise.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwIOSwitchThreeAlarmResume 1.3.6.1.4.1.2011.5.25.219.2.10.24
The IO-alarm 3 resumed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwEntityDyingGaspEvent 1.3.6.1.4.1.2011.5.25.219.2.10.25
Power supply failed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSystemConfigTrap 1.3.6.1.4.1.2011.5.25.219.2.11
OBJECT IDENTIFIER    

hwSystemConfigError 1.3.6.1.4.1.2011.5.25.219.2.11.1
System configuration error has been detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSystemConfigResume 1.3.6.1.4.1.2011.5.25.219.2.11.2
Resume from system configuration error situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwSystemRollback 1.3.6.1.4.1.2011.5.25.219.2.11.3
System configuration error has been detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortTrap 1.3.6.1.4.1.2011.5.25.219.2.12
OBJECT IDENTIFIER    

hwPortDown 1.3.6.1.4.1.2011.5.25.219.2.12.1
One of the port physical connect down.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortUp 1.3.6.1.4.1.2011.5.25.219.2.12.2
One of the port physical connect up.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPortNoSupportOETrap 1.3.6.1.4.1.2011.5.25.219.2.12.3
one of the stack port does not support the insertion of the O/E converter.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUserDefTrap 1.3.6.1.4.1.2011.5.25.219.2.13
OBJECT IDENTIFIER    

hwUserDefAlarm 1.3.6.1.4.1.2011.5.25.219.2.13.1
User defined alarm has been detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUserDefResume 1.3.6.1.4.1.2011.5.25.219.2.13.2
Resume from User defined alarm.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCPUTrap 1.3.6.1.4.1.2011.5.25.219.2.14
OBJECT IDENTIFIER    

hwCPUUtilizationRising 1.3.6.1.4.1.2011.5.25.219.2.14.1
CPU utilization overrun.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwCPUUtilizationResume 1.3.6.1.4.1.2011.5.25.219.2.14.2
CPU utilization back to normal level
Status: current Access: read-write
NOTIFICATION-TYPE    

hwMemoryTrap 1.3.6.1.4.1.2011.5.25.219.2.15
OBJECT IDENTIFIER    

hwMemUtilizationRising 1.3.6.1.4.1.2011.5.25.219.2.15.1
Memory utilization overrun.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwMemUtilizationResume 1.3.6.1.4.1.2011.5.25.219.2.15.2
Memory utilization back to normal level
Status: current Access: read-write
NOTIFICATION-TYPE    

hwStorageDevTrap 1.3.6.1.4.1.2011.5.25.219.2.16
OBJECT IDENTIFIER    

hwStorageDevRemove 1.3.6.1.4.1.2011.5.25.219.2.16.1
Memory utilization overrun.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwStorageDevInsert 1.3.6.1.4.1.2011.5.25.219.2.16.2
Memory utilization back to normal level
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPppTrap 1.3.6.1.4.1.2011.5.25.219.2.17
OBJECT IDENTIFIER    

hwPppLoopbackDetect 1.3.6.1.4.1.2011.5.25.219.2.17.1
The interface Loopback is detected.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPppLoopbackDetResume 1.3.6.1.4.1.2011.5.25.219.2.17.2
The interface is recovered from Loopback.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFileStatusTrap 1.3.6.1.4.1.2011.5.25.219.2.18
OBJECT IDENTIFIER    

hwFileError 1.3.6.1.4.1.2011.5.25.219.2.18.1
Memory utilization overrun.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwFileErrorResume 1.3.6.1.4.1.2011.5.25.219.2.18.2
Memory utilization back to normal level
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUSBTrap 1.3.6.1.4.1.2011.5.25.219.2.19
OBJECT IDENTIFIER    

hwUSBInsert 1.3.6.1.4.1.2011.5.25.219.2.19.1
The USB device has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUSBRemove 1.3.6.1.4.1.2011.5.25.219.2.19.2
The USB device has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUSBUnidentified 1.3.6.1.4.1.2011.5.25.219.2.19.3
The USB device is unidentified.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUSBUnidentifiedResume 1.3.6.1.4.1.2011.5.25.219.2.19.4
The USB device resume from unidentified situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwUsbStatusChg 1.3.6.1.4.1.2011.5.25.219.2.19.5
The USB device status has been changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuTrap 1.3.6.1.4.1.2011.5.25.219.2.20
OBJECT IDENTIFIER    

hwPmuRemove 1.3.6.1.4.1.2011.5.25.219.2.20.1
Pmu has been removed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuInsert 1.3.6.1.4.1.2011.5.25.219.2.20.2
Pmu has been inserted.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuFail 1.3.6.1.4.1.2011.5.25.219.2.20.3
Pmu become failure for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuFailResume 1.3.6.1.4.1.2011.5.25.219.2.20.4
Pmu resume from failure.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuInvalid 1.3.6.1.4.1.2011.5.25.219.2.20.5
Pmu is invalid for some reason.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwPmuInvalidResume 1.3.6.1.4.1.2011.5.25.219.2.20.6
Pmu resume from invalid situation.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwTRAFFICTrap 1.3.6.1.4.1.2011.5.25.219.2.21
OBJECT IDENTIFIER    

hwRATEOFTRAFFICRising 1.3.6.1.4.1.2011.5.25.219.2.21.1
Rate of traffic overrun.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwRATEOFTRAFFICResume 1.3.6.1.4.1.2011.5.25.219.2.21.2
Rate of traffic back to normal level.
Status: current Access: read-write
NOTIFICATION-TYPE    

hwBatteryTrap 1.3.6.1.4.1.2011.5.25.219.2.22
OBJECT IDENTIFIER    

hwBatteryFull 1.3.6.1.4.1.2011.5.25.219.2.22.1
battery percent is full .
Status: current Access: read-write
NOTIFICATION-TYPE    

hwEntityTrapConformance 1.3.6.1.4.1.2011.5.25.219.3
OBJECT IDENTIFIER    

hwEntityTrapCompliances 1.3.6.1.4.1.2011.5.25.219.3.1
OBJECT IDENTIFIER    

hwEntityTrapCompliance 1.3.6.1.4.1.2011.5.25.219.3.1.1
Compliance statement for agents that provide full support for hwBaseTrapMIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

hwEntityTrapGroups 1.3.6.1.4.1.2011.5.25.219.3.2
OBJECT IDENTIFIER    

hwEntityObjectGroup 1.3.6.1.4.1.2011.5.25.219.3.2.1
Group for base trap objects.
Status: current Access: read-write
OBJECT-GROUP    

hwEntityTrapGroup 1.3.6.1.4.1.2011.5.25.219.3.2.2
Group for all base traps.
Status: current Access: read-write
NOTIFICATION-GROUP