HUAWEI-DETECT-ENGINE-MIB

File: HUAWEI-DETECT-ENGINE-MIB.mib (4273 bytes)

Imported modules

HUAWEI-MIB SNMPv2-CONF P-BRIDGE-MIB
IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

hwDatacomm OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP EnabledStatus InterfaceIndex
SnmpAdminString Integer32 Unsigned32
Counter64 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE DateAndTime DisplayString
RowStatus TEXTUAL-CONVENTION AutonomousType

Defined Values

hwDetectEngineMIB 1.3.6.1.4.1.2011.5.25.308
The HUAWEI-DETECT-ENGINE-MIB contains objects to configure Logic module, including switching logic startup file. This MIB module objects can switch logic startup file for NQA-RTP module or OAM module.
MODULE-IDENTITY    

hwDetectEngineObject 1.3.6.1.4.1.2011.5.25.308.1
OBJECT IDENTIFIER    

hwDetectEngineGlobalObjects 1.3.6.1.4.1.2011.5.25.308.1.1
OBJECT IDENTIFIER    

hwDetectEngineOAMEnable 1.3.6.1.4.1.2011.5.25.308.1.1.1
Globally enable or disable the detect-engine for oam. If the hwDetectEngineOAMEnable is 1, detect-engine for oam is enabled. If the hwDetectEngineOAMEnable is 2, detect-engine for oam is disabled. By default, detect-engine for oam is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwDetectEngineNQAEnable 1.3.6.1.4.1.2011.5.25.308.1.1.2
Globally enable or disable the detect-engine for nqa-rtp. If the hwDetectEngineNQAEnable is 1, detect-engine for nqa-rtp is enabled. If the hwDetectEngineNQAEnable is 2, detect-engine for nqa-rtp is disabled. By default, detect-engine for nqa-rtp is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwDetectEngineConformance 1.3.6.1.4.1.2011.5.25.308.100
OBJECT IDENTIFIER    

hwDetectEngineCompliances 1.3.6.1.4.1.2011.5.25.308.100.1
OBJECT IDENTIFIER    

hwDetectEngineCompliance 1.3.6.1.4.1.2011.5.25.308.100.1.1
Compliance statement for agents that provide full support for hwDetectEngineMIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

hwDetectEngineGroups 1.3.6.1.4.1.2011.5.25.308.100.2
OBJECT IDENTIFIER    

hwDetectEngineGlobalObjectGroup 1.3.6.1.4.1.2011.5.25.308.100.2.1
Group for base trap objects.
Status: current Access: read-write
OBJECT-GROUP