HUAWEI-BGP-ACCOUNTING-MIB

File: HUAWEI-BGP-ACCOUNTING-MIB.mib (11127 bytes)

Imported modules

HUAWEI-MIB RFC1213-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hwDatacomm ifIndex OBJECT-GROUP
MODULE-COMPLIANCE Integer32 Counter64
OBJECT-TYPE MODULE-IDENTITY RowStatus
TEXTUAL-CONVENTION

Defined Types

AddressType  
invalid(0) source(1) destination(2)
TEXTUAL-CONVENTION    
  INTEGER invalid(0), source(1), destination(2)  

DirectionType  
invalid(0) inbound(1) outbound(2) inbound-and-outbound(3)
TEXTUAL-CONVENTION    
  INTEGER invalid(0), inbound(1), outbound(2), inboundAndOutbound(3)  

HwBgpAcctCfgEntry  
SEQUENCE    
  hwbgpAcctCfgIfIndex Integer32
  hwbgpAcctSrcOrDest AddressType
  hwbgpAcctDirection DirectionType
  hwbgpAcctCfgRowStatus RowStatus

HwBgpAcctStatEntry  
SEQUENCE    
  hwbgpAcctStatIfIndex Integer32
  hwbgpAcctTrafficIndex Integer32
  hwbgpAcctInPacketCount Counter64
  hwbgpAcctInOctetCount Counter64
  hwbgpAcctOutPacketCount Counter64
  hwbgpAcctOutOctetCount Counter64

Defined Values

hwBgpAcctMIB 1.3.6.1.4.1.2011.5.25.39
The HUAWEI-BGP-ACCOUNTING-MIB contains objects to Manage configuration and Monitor running state for BGP Accounting feature.
MODULE-IDENTITY    

hwBgpAcctMIBObjects 1.3.6.1.4.1.2011.5.25.39.1
OBJECT IDENTIFIER    

hwBgpAcctCfgTable 1.3.6.1.4.1.2011.5.25.39.1.1
The hwBgpAcctCfgTable provides the configuration of BGP Accounting.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBgpAcctCfgEntry

hwBgpAcctCfgEntry 1.3.6.1.4.1.2011.5.25.39.1.1.1
Each HwBgpAcctCfgEntry provides BGP accounting configuration for traffic of interest on an ingress and/or egress interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBgpAcctCfgEntry  

hwbgpAcctCfgIfIndex 1.3.6.1.4.1.2011.5.25.39.1.1.1.1
Interface Index, equal to ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwbgpAcctSrcOrDest 1.3.6.1.4.1.2011.5.25.39.1.1.1.2
An integer value greater than 0, that uniquely identifies BGP accounting based on source address or destination address. 1 is source ,2 is destination, and the defaule value is 2
Status: current Access: read-create
OBJECT-TYPE    
  AddressType  

hwbgpAcctDirection 1.3.6.1.4.1.2011.5.25.39.1.1.1.3
An integer value greater than 0, that uniquely identifies BGP accounting the inbound traffic or outbound traffic. 1 is inbound ,2 is outbound, and 3 is both inbound and outbound
Status: current Access: read-create
OBJECT-TYPE    
  DirectionType  

hwbgpAcctCfgRowStatus 1.3.6.1.4.1.2011.5.25.39.1.1.1.4
RowStatus. Three actions are used: active, createAndGo, destroy
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBgpAcctStatTable 1.3.6.1.4.1.2011.5.25.39.1.2
The hwBgpAcctStatTable provides BGP accounting statistics for ingress and egress traffic on an interface. This data could be used for purposes like billing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBgpAcctStatEntry

hwBgpAcctStatEntry 1.3.6.1.4.1.2011.5.25.39.1.2.1
Each hwBgpAcctStatEntry provides statistics for traffic of interest on an ingress and/or egress interfaces. The statistics include ingress packet counts, ingress octet counts, egress packet counts and egress octet counts. Entries are created when traffic-type is configured on an interface. Entries are deleted automatically when the user removes the corresponding traffic-type configuration from an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBgpAcctStatEntry  

hwbgpAcctStatIfIndex 1.3.6.1.4.1.2011.5.25.39.1.2.1.1
Interface Index, equal to ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwbgpAcctTrafficIndex 1.3.6.1.4.1.2011.5.25.39.1.2.1.2
An integer value greater than 0, that uniquely identifies a traffic-type. The traffic-type means the traffic coming into an interface can be differentiated into different types. It is up to the user to give meaning to and configure the various traffic-types on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

hwbgpAcctInPacketCount 1.3.6.1.4.1.2011.5.25.39.1.2.1.3
The total number of packets received for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwbgpAcctInOctetCount 1.3.6.1.4.1.2011.5.25.39.1.2.1.4
The total number of octets received for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwbgpAcctOutPacketCount 1.3.6.1.4.1.2011.5.25.39.1.2.1.5
The total number of packets transmitted for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwbgpAcctOutOctetCount 1.3.6.1.4.1.2011.5.25.39.1.2.1.6
The total number of octets transmitted for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwBgpAcctConformance 1.3.6.1.4.1.2011.5.25.39.2
OBJECT IDENTIFIER    

hwBgpAcctCompliances 1.3.6.1.4.1.2011.5.25.39.2.1
OBJECT IDENTIFIER    

hwBgpAcctCompliance 1.3.6.1.4.1.2011.5.25.39.2.1.1
The compliance statement for entities that implement ip bgp-accouting on a router.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwBgpAcctStatGroups 1.3.6.1.4.1.2011.5.25.39.2.2
OBJECT IDENTIFIER    

hwBgpAcctCfgGroup 1.3.6.1.4.1.2011.5.25.39.2.2.1
Required objects to provide hwBgpAcctMIB objects configuration information. hwBgpAcctCfgGroup is optional.
Status: current Access: read-only
OBJECT-GROUP    

hwBgpAcctStatGroup 1.3.6.1.4.1.2011.5.25.39.2.2.2
Required objects to provide hwBgpAcctMIB objects configuration information. hwBgpAcctStatGroup is optional.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor