HUAWEI-BFD-MIB

File: HUAWEI-BFD-MIB.mib (129697 bytes)

Imported modules

HUAWEI-MIB P-BRIDGE-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC IPV6-TC
INET-ADDRESS-MIB

Imported symbols

hwDatacomm EnabledStatus OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP IpAddress
Integer32 Unsigned32 Counter32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
RowStatus TEXTUAL-CONVENTION TruthValue
DisplayString Ipv6Address InetAddressType
InetAddress

Defined Types

BfdInterval  
Bfd Time Interval Type.
TEXTUAL-CONVENTION    
  Integer32  

BfdDiag  
Diagnostic code specifying the local system's reason for the last session state changed.
TEXTUAL-CONVENTION    
  Integer32  

HwBfdIfConfEntry  
SEQUENCE    
  hwBfdIfConfIndex Integer32
  hwBfdIfConfName OCTET STRING
  hwBfdIfConfEnable Integer32
  hwBfdIfConfDeleting Integer32
  hwBfdIfConfAvailable Integer32
  hwBfdIfConfSessCnt Integer32
  hwBfdIfConfRowStatus RowStatus

HwBfdSessionConfEntry  
SEQUENCE    
  hwBfdSessConfName OCTET STRING
  hwBfdSessConfMIndex Unsigned32
  hwBfdSessConfLocalDiscr Unsigned32
  hwBfdSessConfRemoteDiscr Unsigned32
  hwBfdSessConfPeerAddr IpAddress
  hwBfdSessConfBindIfIndex Unsigned32
  hwBfdSessConfBindIfName OCTET STRING
  hwBfdSessConfDemandEnable Integer32
  hwBfdSessConfDemandTimerInterval Unsigned32
  hwBfdSessConfDetectMult Unsigned32
  hwBfdSessConfDesiredMinRxInterval BfdInterval
  hwBfdSessConfDesiredMinTxInterval BfdInterval
  hwBfdSessConfWTRInterval Integer32
  hwBfdSessConfTOS Integer32
  hwBfdSessConfPSTFlag Integer32
  hwBfdSessConfCommitFlag Integer32
  hwBfdSessConfAdminStatus Integer32
  hwBfdSessConfRowStatus RowStatus
  hwBfdSessConfSourceAddr IpAddress
  hwBfdSessConfVrfIndex Unsigned32
  hwBfdSessConfVPNName OCTET STRING
  hwBfdSessConfDefaultIp INTEGER
  hwBfdSessConfPISFlag INTEGER
  hwBfdSessConfBindType INTEGER
  hwBfdSessConfNextHop IpAddress
  hwBfdSessConfStaticLspName OCTET STRING
  hwBfdSessConfPWSecondaryFlag INTEGER
  hwBfdSessConfTunnelDetectType INTEGER
  hwBfdSessConfVcId Unsigned32
  hwBfdSessConfVsiName OCTET STRING
  hwBfdSessConfVsiPeerAddr IpAddress
  hwBfdSessConfDiscrAuto EnabledStatus
  hwBfdSessConfPeerIpv6Addr Ipv6Address
  hwBfdSessConfSourceIpv6Addr Ipv6Address
  hwBfdSessConfIpv6NextHop Ipv6Address
  hwBfdSessConfIsIpv6Addr TruthValue
  hwBfdSessConfKeychainName OCTET STRING
  hwBfdSessConfMeticulous EnabledStatus
  hwBfdSessConfLooseAuthentication TruthValue
  hwBfdSessConfOneArmEcho EnabledStatus
  hwBfdSessConfMinEchoRxInterval Unsigned32
  hwBfdSessConfPWTtlMode INTEGER
  hwBfdSessConfPWTtl Integer32
  hwBfdSessConfRemotePeerIpType InetAddressType
  hwBfdSessConfRemotePeerIp InetAddress
  hwBfdSessConfSelectBoard DisplayString
  hwBfdSessConfPWSPE INTEGER
  hwBfdSessConfPWTrackIfName DisplayString
  hwBfdSessConfIsPWTrackIf EnabledStatus
  hwBfdSessConfEncapsulationType DisplayString
  hwBfdSessConfPEVid Unsigned32
  hwBfdSessConfCEVid Unsigned32
  hwBfdSessConfTOSEx Integer32

HwBfdSessionEntry  
SEQUENCE    
  hwBfdSessIndex Unsigned32
  hwBfdSessMIndex Unsigned32
  hwBfdSessBindVRRP Integer32
  hwBfdSessCfgName OCTET STRING
  hwBfdSessPeerAddr IpAddress
  hwBfdSessBindIfIndex Integer32
  hwBfdSessBindIfName OCTET STRING
  hwBfdSessLocalDiscr Unsigned32
  hwBfdSessRemoteDiscr Unsigned32
  hwBfdSessOperMode Integer32
  hwBfdSessDetectMult Unsigned32
  hwBfdSessDemandTimerInterval BfdInterval
  hwBfdSessActualRxInterval BfdInterval
  hwBfdSessActualTxInterval BfdInterval
  hwBfdSessWTRInterval Integer32
  hwBfdSessTOS Integer32
  hwBfdSessState Integer32
  hwBfdSessDiag Integer32
  hwBfdSessSourceAddr IpAddress
  hwBfdSessVrfIndex Unsigned32
  hwBfdSessVPNName OCTET STRING
  hwBfdSessType INTEGER
  hwBfdSessBindAppType INTEGER
  hwBfdSessDefaultIp INTEGER
  hwBfdSessPISFlag INTEGER
  hwBfdSessBindType INTEGER
  hwBfdSessNextHop IpAddress
  hwBfdSessStaticLspName OCTET STRING
  hwBfdSessLspIndex Unsigned32
  hwBfdSessPWSecondaryFlag INTEGER
  hwBfdSessTunnelDetectType INTEGER
  hwBfdSessVcId Unsigned32
  hwBfdSessVsiName OCTET STRING
  hwBfdSessVsiPeerAddr IpAddress
  hwBfdSessDiscrAuto EnabledStatus
  hwBfdSessPeerIpv6Addr Ipv6Address
  hwBfdSessSourceIpv6Addr Ipv6Address
  hwBfdSessIpv6NextHop Ipv6Address
  hwBfdSessIsIPv6Addr TruthValue
  hwBfdSessMeticulous EnabledStatus
  hwBfdSessLooseAuthentication TruthValue
  hwBfdSessAuthenticationStatus Integer32
  hwBfdSessOneArmEcho EnabledStatus
  hwBfdSessPWTtlMode INTEGER
  hwBfdSessPWTtl Integer32
  hwBfdSessRemotePeerIpType InetAddressType
  hwBfdSessRemotePeerIp InetAddress
  hwBfdSessSelectBoard DisplayString
  hwBfdSessPWSPE INTEGER
  hwBfdSessPWTrackIfName DisplayString
  hwBfdSessIsPWTrackIf EnabledStatus
  hwBfdSessEncapsulationType DisplayString
  hwBfdSessPEVid Unsigned32
  hwBfdSessCEVid Unsigned32
  hwBfdSessPeerInetAddrType InetAddressType
  hwBfdSessPeerInetAddr InetAddress
  hwBfdSessInetNextHopType InetAddressType
  hwBfdSessInetNextHop InetAddress
  hwBfdSessBindAppTypeMask OCTET STRING
  hwBfdSessDscp Integer32

HwBfdSessionPerEntry  
SEQUENCE    
  hwBfdSessPerIndex Unsigned32
  hwBfdSessPerfPktIn Counter32
  hwBfdSessPerfPktInHC Counter32
  hwBfdSessPerfPktOut Counter32
  hwBfdSessPerfPktOutHC Counter32
  hwBfdSessPerfBadIn Counter32
  hwBfdSessPerfBadInHC Counter32
  hwBfdSessPerfBadOut Counter32
  hwBfdSessPerfBadOutHC Counter32
  hwBfdSessPerfLastSessDownTime OCTET STRING
  hwBfdSessPerfSessDownCount Unsigned32
  hwBfdSessPerfSessShortBreakCount Unsigned32
  hwBfdSessionPerStartTime OCTET STRING

HwBfdSlotEntry  
SEQUENCE    
  hwBfdSlotID Unsigned32
  hwBfdSlotReserveOneHopSessNum Unsigned32
  hwBfdSlotOneHopSessNum Unsigned32
  hwBfdSlotCurrentSessNum Unsigned32
  hwBfdSlotRowStatus RowStatus

HwBfdTtlConfEntry  
SEQUENCE    
  hwBfdTtlConfAddr IpAddress
  hwBfdTtlConfMaskLen Integer32
  hwBfdTtlConfType INTEGER
  hwBfdTtlConfValue Integer32
  hwBfdTtlConfRowStatus RowStatus

HwBfdPassiveAuthEntry  
SEQUENCE    
  hwBfdPassiveAuthPeerAddr IpAddress
  hwBfdPassiveAuthProtocol Integer32
  hwBfdPassiveAuthKeychainName OCTET STRING
  hwBfdPassiveAuthMeticulous EnabledStatus
  hwBfdPassiveAuthLoose TruthValue
  hwBfdPassiveAuthRowStatus RowStatus

Defined Values

hwBFDMIB 1.3.6.1.4.1.2011.5.25.38
MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes.
MODULE-IDENTITY    

hwBfdScalarsObjects 1.3.6.1.4.1.2011.5.25.38.1
OBJECT IDENTIFIER    

hwBfdVersionNumber 1.3.6.1.4.1.2011.5.25.38.1.1
The current version number of the BFD protocol is 1. Default: 1
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdAdminStatus 1.3.6.1.4.1.2011.5.25.38.1.2
Describe the administrative status of a BFD protocol. Options: 1. enabled(1) -denotes that the BFD Process is active on all interface 2. disabled(2) -denotes that the BFD process is disabled on all interfaces Default: 2
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessLimitNumber 1.3.6.1.4.1.2011.5.25.38.1.3
Define the maximum number of BFD sessions allowed in the logic router. Default: 0
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessInterfaceLimitNumber 1.3.6.1.4.1.2011.5.25.38.1.4
Define the maximum number of BFD sessions allowed per board. Default: 0
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessStaticNumber 1.3.6.1.4.1.2011.5.25.38.1.5
The total number of BFD static sessions. Default: 0
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessDynamicNumber 1.3.6.1.4.1.2011.5.25.38.1.6
The total number of BFD dynamic sessions. Default: 0
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessGlobalDefaultIpAddr 1.3.6.1.4.1.2011.5.25.38.1.7
Define the default multicast IP address used in BFD multicast detection. Default: 0
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwBfdEchoPassiveStatus 1.3.6.1.4.1.2011.5.25.38.1.8
The passive Echo function of BFD. Options: 1. enabled(1) -denotes that the BFD EchoPassive capability is enabled 2. disabled(2) -denotes that the BFD EchoPassive capability is disabled Default: 2
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwBfdEchoAclNum 1.3.6.1.4.1.2011.5.25.38.1.9
The Acl Number for passive Echo function of BFD. Default: 0
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 2000..2999  

hwBfdSessDynamicPingInterval 1.3.6.1.4.1.2011.5.25.38.1.10
Define the sending interval of the MPLS echo packet. Default: 60 Unit: second
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..600  

hwBfdSessDynamicSupportPassive 1.3.6.1.4.1.2011.5.25.38.1.11
The capability of automatically creating BFD sessions on the LSP egress. Options: 1. enabled(1) -denotes that the egress can create BFD sessions 2. disabled(2) -denotes that the egress can not create BFD sessions Default: 2
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessDelayUpTime 1.3.6.1.4.1.2011.5.25.38.1.12
Define delay interval before the session turns to up. Unit: second Default: 0
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..600  

hwBfdSessMultiDstPort 1.3.6.1.4.1.2011.5.25.38.1.13
The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0. Default: 3784
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 3784 | 4784  

hwBfdTrapSendInterval 1.3.6.1.4.1.2011.5.25.38.1.14
Define the sending interval of TRAP message. Unit: second Default: 120
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 1..600  

hwBfdLimitDeviceName 1.3.6.1.4.1.2011.5.25.38.1.15
The device name which session number reached up limit.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBfdDynamicSessionTos 1.3.6.1.4.1.2011.5.25.38.1.16
The Tos-Exp of dynamic session. Default: 7
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwBfdStaticSessionTos 1.3.6.1.4.1.2011.5.25.38.1.17
The Tos-Exp of static session. Default: 7
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7 | 255  

hwBfdDynamicSessionTosEx 1.3.6.1.4.1.2011.5.25.38.1.18
The extended Tos-Exp of dynamic session. Default: 7
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7 | 255  

hwBfdObjects 1.3.6.1.4.1.2011.5.25.38.2
OBJECT IDENTIFIER    

hwBfdIfConfTable 1.3.6.1.4.1.2011.5.25.38.2.1
The interface configuration table of BFD. The index of this table is hwBfdIfConfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdIfConfEntry

hwBfdIfConfEntry 1.3.6.1.4.1.2011.5.25.38.2.1.1
The interface configuration table of BFD. The index of this entry is hwBfdIfConfIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdIfConfEntry  

hwBfdIfConfIndex 1.3.6.1.4.1.2011.5.25.38.2.1.1.1
It is the configuration index of this interface. This index is automatically allocated inside the system and is not user-configurable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hwBfdIfConfName 1.3.6.1.4.1.2011.5.25.38.2.1.1.2
It is the name of this Interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hwBfdIfConfEnable 1.3.6.1.4.1.2011.5.25.38.2.1.1.3
The flag whether the interface has enabled BFD. Options: 1. disable(0) -Indicates that the interface has disabled BFD 2. enable(1) -Indicates that the interface has enabled BFD
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

hwBfdIfConfDeleting 1.3.6.1.4.1.2011.5.25.38.2.1.1.4
The flag that whether the interface is in deleting. Options: 1. notDeleted(0) -the interface is not deleted 2. deleted(1) -the interface is deleted
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

hwBfdIfConfAvailable 1.3.6.1.4.1.2011.5.25.38.2.1.1.5
The flag that whether the interface is available. Options: 1. notAvailable(0) -the interface is not available 2. available(1) -the interface is available
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

hwBfdIfConfSessCnt 1.3.6.1.4.1.2011.5.25.38.2.1.1.6
The number of sessions that has been bound to this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBfdIfConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.1.1.7
Used to manage the creation and deletion of conceptual rows.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBfdSessionConfTable 1.3.6.1.4.1.2011.5.25.38.2.2
BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this table is hwBfdSessConfName.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdSessionConfEntry

hwBfdSessionConfEntry 1.3.6.1.4.1.2011.5.25.38.2.2.1
BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this entry is hwBfdSessConfName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdSessionConfEntry  

hwBfdSessConfName 1.3.6.1.4.1.2011.5.25.38.2.2.1.1
It is the name of this configuration model.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwBfdSessConfMIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.2
It is the configuration index of this session.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwBfdSessConfLocalDiscr 1.3.6.1.4.1.2011.5.25.38.2.2.1.3
Define the local discriminator of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessConfRemoteDiscr 1.3.6.1.4.1.2011.5.25.38.2.2.1.4
Define the remote discriminator of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessConfPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.5
Define the IP address of the peer in the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwBfdSessConfBindIfIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.6
It is the index of the binding interface in the BFD configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessConfBindIfName 1.3.6.1.4.1.2011.5.25.38.2.2.1.7
It is the name of the binding interface in the BFD configuration.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hwBfdSessConfDemandEnable 1.3.6.1.4.1.2011.5.25.38.2.2.1.8
It is the flag of the BFD demand mode. Options: 1. disabled(0) -disable the BFD demand mode 2. enabled(1) -enable the BFD demand mode
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

hwBfdSessConfDemandTimerInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.9
Define the detecting interval in the BFD session with the demand mode. Unit: millisecond
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 500..300000  

hwBfdSessConfDetectMult 1.3.6.1.4.1.2011.5.25.38.2.2.1.10
It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3..50  

hwBfdSessConfDesiredMinRxInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.11
This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond
Status: current Access: read-create
OBJECT-TYPE    
  BfdInterval 1..2147483647  

hwBfdSessConfDesiredMinTxInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.12
This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond
Status: current Access: read-create
OBJECT-TYPE    
  BfdInterval 1..2147483647  

hwBfdSessConfWTRInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.13
The wait-to-restore (WTR) time of the BFD session. The event that indicates the session changing into the Up state is reported to the application program only after the WTR times out. Unit: minute
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..60  

hwBfdSessConfTOS 1.3.6.1.4.1.2011.5.25.38.2.2.1.14
This is the TOS value of bfd packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

hwBfdSessConfPSTFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.15
The PST flag of the BFD session configuration. It indicates the status association between the current BFD session and the interface bound to the session. Options: 1. disabled(0) -indicates that the PST capability of the BFD session is disabled 2. enabled(1) -indicates that the PST capability of the BFD session is enabled
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

hwBfdSessConfCommitFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.16
It is the commit flag of the configuration entry. Options: 1. notCommit(0) -not commit 2. commit(1) -commit
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

hwBfdSessConfAdminStatus 1.3.6.1.4.1.2011.5.25.38.2.2.1.17
A BFD session can be administratively enabled or disabled. The AdminStatus field indicates the BFD session status. Options: 1. 0 -disable 2. 1 -enable
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

hwBfdSessConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.2.1.18
Used to manage the creation and deletion of conceptual rows.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBfdSessConfSourceAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.19
Define the source IP address of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwBfdSessConfVrfIndex 1.3.6.1.4.1.2011.5.25.38.2.2.1.20
The index of the VPN interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessConfVPNName 1.3.6.1.4.1.2011.5.25.38.2.2.1.21
The name of VPN interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwBfdSessConfDefaultIp 1.3.6.1.4.1.2011.5.25.38.2.2.1.22
BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

hwBfdSessConfPISFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.23
The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -associate with interface state 3. subif(3) -associate with interface and correlative sub interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(1), true(2), subif(3)  

hwBfdSessConfBindType 1.3.6.1.4.1.2011.5.25.38.2.2.1.24
The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER interfaceIp(1), peerIp(2), sourceIp(3), ifAndSourceIp(4), fec(5), tunnelIf(6), ospf(7), isis(8), ldpLsp(9), staticLsp(10), teLsp(11), teTunnel(12), pw(13), vsiPw(15), ldpTunnel(21), bgpTunnel(22)  

hwBfdSessConfNextHop 1.3.6.1.4.1.2011.5.25.38.2.2.1.25
It is the next hop of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwBfdSessConfStaticLspName 1.3.6.1.4.1.2011.5.25.38.2.2.1.26
It is the static LSP name of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

hwBfdSessConfPWSecondaryFlag 1.3.6.1.4.1.2011.5.25.38.2.2.1.27
The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2)-secondary PW 3. flagNoPW(3) -no PW
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER flagMasterPW(1), flagSecondaryPW(2), flagNoPW(3)  

hwBfdSessConfTunnelDetectType 1.3.6.1.4.1.2011.5.25.38.2.2.1.28
Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER flagBothDown(1), flagNeighborDown(2)  

hwBfdSessConfVcId 1.3.6.1.4.1.2011.5.25.38.2.2.1.29
It is the ID of VC.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessConfVsiName 1.3.6.1.4.1.2011.5.25.38.2.2.1.30
It is the name of VSI.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwBfdSessConfVsiPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.2.1.31
It is the peer-ip of VSI.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwBfdSessConfDiscrAuto 1.3.6.1.4.1.2011.5.25.38.2.2.1.32
Describe whether the discriminator can be auto allocated. Options: 1.enabled(1) -the discriminator can be allocated automatically 2.disabled(2) -the discriminator can not be allocated automatically
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessConfPeerIpv6Addr 1.3.6.1.4.1.2011.5.25.38.2.2.1.33
Define the peer IPv6 address of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessConfSourceIpv6Addr 1.3.6.1.4.1.2011.5.25.38.2.2.1.34
Define the source IPv6 address of the BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessConfIpv6NextHop 1.3.6.1.4.1.2011.5.25.38.2.2.1.35
It is the next hop of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessConfIsIpv6Addr 1.3.6.1.4.1.2011.5.25.38.2.2.1.36
Whether the peer address of the BFD session is IPv6 address.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwBfdSessConfKeychainName 1.3.6.1.4.1.2011.5.25.38.2.2.1.37
Specify the name of the keychain for authentication.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..47)  

hwBfdSessConfMeticulous 1.3.6.1.4.1.2011.5.25.38.2.2.1.38
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessConfLooseAuthentication 1.3.6.1.4.1.2011.5.25.38.2.2.1.39
Whether loose authentication check. Options: 1.True(1) -loose-check 2.False(2) -do not loose-check
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hwBfdSessConfOneArmEcho 1.3.6.1.4.1.2011.5.25.38.2.2.1.40
The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessConfMinEchoRxInterval 1.3.6.1.4.1.2011.5.25.38.2.2.1.41
The value of this object identifies the minimum interval between received BFD Control packets, in milliseconds.This value reflects the capability of receiving BFD Control packets. Unit: millisecond
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..4294967295  

hwBfdSessConfPWTtlMode 1.3.6.1.4.1.2011.5.25.38.2.2.1.42
The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3)-indicates that the TTL is 255 by default 4. none(4) -indicates that the TTL is not in PW mode
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER config(1), auto(2), default(3), none(4)  

hwBfdSessConfPWTtl 1.3.6.1.4.1.2011.5.25.38.2.2.1.43
The value of this object identifies the TTL used by the BFD session for PW. The vlaue is configurable only when the configuration mode of a TTL is config.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

hwBfdSessConfRemotePeerIpType 1.3.6.1.4.1.2011.5.25.38.2.2.1.44
The value of this object identifies the type of the destination address of the BFD session for PW.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hwBfdSessConfRemotePeerIp 1.3.6.1.4.1.2011.5.25.38.2.2.1.45
The value of this object identifies the destination IP address of the BFD session for PW.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

hwBfdSessConfSelectBoard 1.3.6.1.4.1.2011.5.25.38.2.2.1.46
This object indicates the main processing board of a BFD session.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..47)  

hwBfdSessConfPWSPE 1.3.6.1.4.1.2011.5.25.38.2.2.1.47
The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER upe(1), spe(2), none(3)  

hwBfdSessConfPWTrackIfName 1.3.6.1.4.1.2011.5.25.38.2.2.1.48
This object indicates the interface monitored by the BFD session for PW.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

hwBfdSessConfIsPWTrackIf 1.3.6.1.4.1.2011.5.25.38.2.2.1.49
The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2)-disables the BFD session for PW from monitoring the interface
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessConfEncapsulationType 1.3.6.1.4.1.2011.5.25.38.2.2.1.50
The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..63)  

hwBfdSessConfPEVid 1.3.6.1.4.1.2011.5.25.38.2.2.1.51
The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4094  

hwBfdSessConfCEVid 1.3.6.1.4.1.2011.5.25.38.2.2.1.52
The value of this object identifies the inner tag in QinQ packets.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4094  

hwBfdSessConfTOSEx 1.3.6.1.4.1.2011.5.25.38.2.2.1.53
This is the extended TOS value of bfd packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

hwBfdSessionTable 1.3.6.1.4.1.2011.5.25.38.2.3
The BFD Session Table describes the BFD sessions. The index of this table is hwBfdSessIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdSessionEntry

hwBfdSessionEntry 1.3.6.1.4.1.2011.5.25.38.2.3.1
The BFD Session Table describes the BFD sessions. The index of this entry is hwBfdSessIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdSessionEntry  

hwBfdSessIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.1
It is unique and the Index of this session. This index is automatically allocated inside the system and is not user-configurable.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwBfdSessMIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.2
This value indicate the configuration has Main Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hwBfdSessBindVRRP 1.3.6.1.4.1.2011.5.25.38.2.3.1.3
Describe the capability of bound with VRRP for the BFD session. Options: 1. notBind(0) -not bind 2. bind(1) -bind
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1  

hwBfdSessCfgName 1.3.6.1.4.1.2011.5.25.38.2.3.1.4
This indicate the name of the session which will be display course information or statistic information of the session.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwBfdSessPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.5
Define the peer IP address of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBfdSessBindIfIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.6
It is the index of the binding interface in the BFD session
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hwBfdSessBindIfName 1.3.6.1.4.1.2011.5.25.38.2.3.1.7
It is the name of the binding interface in the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hwBfdSessLocalDiscr 1.3.6.1.4.1.2011.5.25.38.2.3.1.8
A unique, nonzero discriminator value generated by the transmitting system, used to demultiplex multiple BFD sessions between the same pair of system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessRemoteDiscr 1.3.6.1.4.1.2011.5.25.38.2.3.1.9
The discriminator received from the corresponding remote system. This field reflects back the received value of My Discriminator, or is zero if that value is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessOperMode 1.3.6.1.4.1.2011.5.25.38.2.3.1.10
Describe the current operating mode configured with the BFD session. Options: 1. 0 -asynchronous mode with echo function 2. 1 -asynchronous mode without echo function 3. 2 -demand mode with echo function 4. 3 -demand mode without echo function 5. 4 -asynchronous One-arm-echo mode
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4  

hwBfdSessDetectMult 1.3.6.1.4.1.2011.5.25.38.2.3.1.11
Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mode. Default: 3
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 3..50  

hwBfdSessDemandTimerInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.12
It is the detecting interval in the BFD session with the demand mode. Unit: millisecond
Status: current Access: read-only
OBJECT-TYPE    
  BfdInterval  

hwBfdSessActualRxInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.13
This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond
Status: current Access: read-only
OBJECT-TYPE    
  BfdInterval  

hwBfdSessActualTxInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.14
This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond
Status: current Access: read-only
OBJECT-TYPE    
  BfdInterval  

hwBfdSessWTRInterval 1.3.6.1.4.1.2011.5.25.38.2.3.1.15
The WTR interval of the BFD session. Unit: minute
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..60  

hwBfdSessTOS 1.3.6.1.4.1.2011.5.25.38.2.3.1.16
This is the TOS value of bfd packet.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

hwBfdSessState 1.3.6.1.4.1.2011.5.25.38.2.3.1.17
Describe the current state of the BFD session. Options: 1. 0 -admin down 2. 1 -down 3. 2 -init 4. 3 -up
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3  

hwBfdSessDiag 1.3.6.1.4.1.2011.5.25.38.2.3.1.18
A diagnostic code specifying the local system's reason for the last session state change. Options: 1. 0 -no diagnostic 2. 1 -control detection time expired 3. 2 -echo function failed 4. 3 -neighbor signaled session down 5. 4 -forwarding plane reset 6. 5 -path down 7. 6 -concatenated path down 8. 7 -administratively down 9. 8 -reverse concatenated path down 10. 9 -neighbor signaled session down (receive admindown) 11. 10-31 -reserved for future use
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

hwBfdSessSourceAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.19
The source address of the session.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBfdSessVrfIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.20
The index of the VPN interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessVPNName 1.3.6.1.4.1.2011.5.25.38.2.3.1.21
The name of VPN interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwBfdSessType 1.3.6.1.4.1.2011.5.25.38.2.3.1.22
The type of the BFD session. Options: 1. static(1) -static 2. dynamic(2) -dynamic 3. entireDynamic(3) -entire dynamic 4. auto(4) -auto
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), entireDynamic(3), auto(4)  

hwBfdSessBindAppType 1.3.6.1.4.1.2011.5.25.38.2.3.1.23
The Application type that this BFD session has been bound to Options: 1. noApplication(1) -No application 2. vrrp(2) -VRRP 3. ifnet(3) -IFNET 4. vrrpAndIfnet(4) -VRRP&IFNET 5. bgp(5) -BGP 6. ospf(6) -OSPF 7. bgpAndOspf(7) -BGP&OSPF 8. oamLspmL2vpn(8) -OAM&LSPM&L2VPN (for LDP LSP and static LSP) 9. oamTnlL2vpn(9) -OAM&TUNNEL&L2VPN (for TE_Tunnnel) 10. lspmL2vpnTnlps(10) -LSPM&TUNNEL_PS&L2VPN (for TE_LSP) 11. oamMplsfwL2vpn(11) -OAM&MPLSFW&L2VPN (for PW) 12. isis(12) -ISIS 13. vsiPw(13) -VSIPW (for VSI PW) 14. vrrpOamLspmL2vpn(14) -VRRP&OAM&LSPM&L2VPN 15. vrrpOamTnlL2vpn(15) -VRRP&OAM&TUNNEL&L2VPN 16. vrrpLspmL2vpnTnlps(16) -VRRP&LSPM&TUNNEL_PS&L2VPN 17. vrrpOamMplsfwL2vpn(17) -VRRP&OAM&MPLSFW&L2VPN 18. pim(18) -PIM 19. bgpIsis(19) -BGP&ISIS 20. bgpPim(20) -BGP&PIM 21. ospfIsis(21) -OSPF&ISIS 22. ospfPim(22) -OSPF&PIM 23. isisPim(23) -ISIS&PIM 24. bgpOspfIsis(24) -BGP&OSPF&ISIS 25. bgpOspfPim(25) -BGP&OSPF&PIM 26. bgpIsisPim(26) -BGP&ISIS&PIM 27. ospfIsisPim(27) -OSPF&ISIS&PIM 28. bgpOspfIsisPim(28) -BGPOSPF&ISIS&PIM 29. bgp6(29) -BGP6 30. ospfv3(30) -OSPFV3 31. isis6(31) -ISIS6 32. pim6(32) -PIM6 33. bgp6Ospfv3(33) -BGP6&OSPFV3 34. bgp6Isis6(34) -BGP6&ISIS6 35. bgp6Pim6(35) -BGP6&PIM6 36. ospfv3Isis6(36) -OSPFV3&ISIS6 37. ospfv3Pim6(37) -OSPFV3&PIM6 38. isis6Pim6(38) -ISIS6&PIM6 39. bgp6Ospfv3Isis6(39) -BGP6&OSPFV3&ISIS6 40. bgp6Ospfv3Pim6(40) -BGP6&OSPFV3&PIM6 41. bgp6Isis6Pim6(41) -BGP6&ISIS6&PIM6 42. ospfv3Isis6Pim6(42) -OSPFV3&ISIS6&PIM6 43. bgp6Ospfv3Isis6Pim6(43) -BGP6&OSPFV3&ISIS6&PIM6 44. auto(44) -AUTO 45. autoIsis(45) -AUTO&ISIS 46. autoOspf(46) -AUTO&OSPF 47. autoBgp(47) -AUTO&BGP 48. autoPim(48) -AUTO&PIM 49. autoIsisOspf(49) -AUTO&ISIS&OSPF 50. autoIsisBgp(50) -AUTO&ISIS&BGP 51. autoIsisPim(51) -AUTO&ISIS&PIM 52. autoOspfBgp(52) -AUTO&OSPF&BGP 53. autoOspfPim(53) -AUTO&OSPF&PIM 54. autoBgpPim(54) -AUTO&BGP&PIM 55. autoIsisOspfBgp(55) -AUTO&ISIS&OSPF&BGP 56. autoIsisOspfBgpPim(56) -AUTO&ISIS&OSPF&BGP&PIM 57. autoIsis6(57) -AUTO&ISIS6 58. autoOspfv3(58) -AUTO&OSPFV3 59. autoBgp6(59) -AUTO&BGP6 60. autoPim6(60) -AUTO&PIM6 61. autoIsis6Ospfv3(61) -AUTO&ISIS6&OSPFV3 62. autoIsis6Bgp6(62) -AUTO&ISIS6&BGP6 63. autoIsis6Pim6(63) -AUTO&ISIS6&PIM6 64. autoOspfv3Bgp6(64) -AUTO&OSPFV3&BGP6) 65. autoOspfv3Pim6(65) -AUTO&OSPFV3&PIM6) 66. autoBgp6Pim6(66) -AUTO&BGP6&PIM6 67. autoIsis6Ospfv3Bgp6(67) -AUTO&ISIS6&OSPFV3&BGP6 68. autoIsis6Ospfv3Bgp6Pim6(68) -AUTO&ISIS6&OSPFV3&BGP6&PIM6 69. etrunk(69) -ETRUNK 70. etrunkIfnet(70) -ETRUNK&IFNET 71. etrunkVrrp(71) -ETRUNK&VRRP 72. etrunkVrrpIfnet(72) -ETRUNK&VRRP&IFNET 73. etrunkOamLspmL2vpn(73) -ETRUNK&OAM&LSPM&L2VPN 74. etrunkOamTnlL2vpn(74) -ETRUNK&OAM&TNL&L2VPN 75. etrunkLspmL2vpnTnlps(75) -ETRUNK&LSPM&L2VPN&TNLPS 76. etrunkOamMplsfwL2vpn(76) -ETRUNK&OAM&MPLSFW&L2VPN 77. etrunkvsiPw(77) -ETRUNK&VSIPW 78. etrunkOamLspmL2vpnVrrp(78) -ETRUNK&OAM&LSPM&L2VPN&VRRP 79. etrunkOamTnlL2vpnVrrp(79) -ETRUNK&OAM&TNL&L2VPN&VRRP 80. etrunkLspmL2vpnTnlpsVrrp(80) -ETRUNK&LSMP&L2VPN&TNLPS&VRRP 81. etrunkOamMplsfwL2vpnVrrp(81) -ETRUNK&OAM&MPLSFW&L2VPN&VRRP 82. rip(82) -RIP 83. bgpRip(83) -BGP&RIP 84. ospfRip(84) -OSPF&RIP 85. isisRip(85) -ISIS&RIP 86. pimRip(86) -PIM&RIP 87. bgpOspfRip(87) -BGP&OSPF&RIP 88. bgpIsisRip(88) -BGP&ISIS&RIP 89. bgpPimRip(89) -BGP&PIM&RIP 90. ospfIsisRip(90) -OSPF&ISIS&RIP 91. ospfPimRip(91) -OSPF&PIM&RIP 92. isisPimRip(92) -ISIS&PIM&RIP 93. bgpOspfIsisRip(93) -BGP&OSPF&ISIS&RIP 94. bgpOspfPimRip(94) -BGP&OSPF&PIM&RIP 95. ospfIsisPimRip(95) -OSPF&ISIS&PIM&RIP 96. autoRip(96) -AUTO&RIP 97. autoBgpRip(97) -AUTO&BGP&RIP 98. autoOspfRip(98) -AUTO&OSPF&RIP 99. autoIsisRip(99) -AUTO&ISIS&RIP 100. autoPimRip(100) -AUTO&PIM&RIP 101. autoBgpOspfRip(101) -AUTO&BGP&OSPF&RIP 102. autoBgpIsisRip(102) -AUTO&BGP&ISIS&RIP 103. autoBgpPimRip(103) -AUTO&BGP&PIM&RIP 104. autoOspfIsisRip(104) -AUTO&OSPF&ISIS&RIP 105. autoOspfPimRip(105) -AUTO&OSPF&PIM&RIP 106. autoIsisPimRip(106) -AUTO&ISIS&PIM&RIP 107. autoBgpOspfIsisRip(107) -AUTO&BGP&OSPF&ISIS&RIP 108. autoBgpOspfPimRip(108) -AUTO&BGP&OSPF&PIM&RIP 109. autoOspfIsisPimRip(109) -AUTO&OSPF&ISIS&PIM&RIP 110. autoIsisOspfBgpPimVrrp(110) -AUTO&ISIS&OSPF&BGP&PIM&VRRP 111. autoIsisOspfPimVrrp(111) -AUTO&ISIS&OSPF&PIM&VRRP 112. autoIsisOspfBgpVrrp(112) -AUTO&ISIS&OSPF&BGP&VRRP 113. autoIsisBgpPimVrrp(113) -AUTO&ISIS&BGP&PIM&VRRP 114. autoOspfBgpPimVrrp(114) -AUTO&OSPF&BGP&PIM&VRRP 115. autoIsisOspfVrrp(115) -AUTO&ISIS&OSPF&VRRP 116. autoIsisBgpVrrp(116) -AUTO&ISIS&BGP&VRRP 117. autoOspfBgpVrrp(117) -AUTO&OSPF&BGP&VRRP 118. autoIsisPimVrrp(118) -AUTO&ISIS&PIM&VRRP 119. autoOspfPimVrrp(119) -AUTO&OSPF&PIM&VRRP 120. autoBgpPimVrrp(120) -AUTO&BGP&PIM&VRRP 121. autoIsisVrrp(121) -AUTO&ISIS&VRRP 122. autoOspfVrrp(122) -AUTO&OSPF&VRRP 123. autoBgpVrrp(123) -AUTO&BGP&VRRP 124. autoPimVrrp(124) -AUTO&PIM&VRRP 125. autoVrrp(125) -AUTO&VRRP 126. autoVrrpBgp6(126) -AUTO&VRRP&BGP6 127. autoOspfv3Isis6Pim6(127) -AUTO&OSPFV3&ISIS6&PIM6 128. autoOspfBgpPim(128) -AUTO&OSPF&BGP&PIM 129. autoIsisOspfPim(129) -AUTO&ISIS&OSPF&PIM 130. autoIsisPimBgp(130) -AUTO&ISIS&BGP&PIM 131. bgpOspfIsisPimRip(131) -BGP&OSPF&ISIS&PIM&RIP 132. autoBgpOspfIsisPimRip(132) -AUTO&BGP&OSPF&ISIS&PIM&RIP 133. bgpRsvp(133) -BGP&RSVP 134. ospfRsvp(134) -OSPF&RSVP 135. isisRsvp(135) -ISIS&RSVP 136. pimRsvp(136) -PIM&RSVP 137. ripRsvp(137) -RIP&RSVP 138. bgpOspfRsvp(138) -BGP&OSPF&RSVP 139. bgpIsisRsvp(139) -BGP&ISIS&RSVP 140. bgpPimRsvp(140) -BGP&PIM&RSVP 141. bgpRipRsvp(141) -BGP&RIP&RSVP 142. ospfIsisRsvp(142) -OSPF&ISIS&RSVP 143. ospfPimRsvp(143) -OSPF&PIM&RSVP 144. ospfRipRsvp(144) -OSPF&RIP&RSVP 145. isisPimRsvp(145) -ISIS&PIM&RSVP 146. isisRipRsvp(146) -ISIS&RIP&RSVP 147. pimRipRsvp(147) -PIM&RIP&RSVP 148. bgpOspfIsisRsvp(148) -BGP&OSPF&ISIS&RSVP 149. bgpOspfPimRsvp(149) -BGP&OSPF&PIM&RSVP 150. bgpOspfRipRsvp(150) -BGP&OSPF&RIP&RSVP 151. bgpIsisPimRsvp(151) -BGP&ISIS&PIM&RSVP 152. bgpIsisRipRsvp(152) -BGP&ISIS&RIP&RSVP 153. bgpPimRipRsvp(153) -BGP&PIM&RIP&RSVP 154. ospfIsisPimRsvp(154) -OSPF&ISIS&PIM&RSVP 155. ospfIsisRipRsvp(155) -OSPF&ISIS&RIP&RSVP 156. isisPimRipRsvp(156) -ISIS&PIM&RIP&RSVP 157. bgpOspfIsisPimRsvp(157) -BGP&OSPF&ISIS&PIM&RSVP 158. bgpOspfIsisRipRSvp(158) -BGP&OSPF&ISIS&RIP&RSVP 159. bgpOspfPimRipRsvp(159) -BGP&OSPF&PIM&RIP&RSVP 160. bgpIsisPimRipRsvp(160) -BGP&ISIS&PIM&RIP&RSVP 161. ospfIsisPimRipRsvp(161) -OSPF&ISIS&PIM&RIP&RSVP 162. bgpOspfIsisPimRipRsvp(162) -BGP&OSPF&ISIS&PIM&RIP&RSVP 163. autoRsvp(163) -AUTO&RSVP 164. autoBgpRsvp(164) -AUTO&BGP&RSVP 165. autoOspfRsvp(165) -AUTO&OSPF&RSVP 166. autoIsisRsvp(166) -AUTO&ISIS&RSVP 167. autoPimRsvp(167) -AUTO&PIM&RSVP 168. autoRipRsvp(168) -AUTO&RIP&RSVP 169. autoBgpOspfRsvp(169) -AUTO&BGP&OSPF&RSVP 170. autoBgpIsisRsvp(170) -AUTO&BGP&ISIS&RSVP 171. autoBgpPimRsvp(171) -AUTO&BGP&PIM&RSVP 172. autoBgpRipRsvp(172) -AUTO&BGP&RIP&RSVP 173. autoOspfIsisRsvp(173) -AUTO&OSPF&ISIS&RSVP 174. autoOspfPimRsvp(174) -AUTO&OSPF&PIM&RSVP 175. autoOspfRipRsvp(175) -AUTO&OSPF&RIP&RSVP 176. autoIsisPimRsvp(176) -AUTO&ISIS&PIM&RSVP 177. autoIsisRipRsvp(177) -AUTO&ISIS&RIP&RSVP 178. autoPimRipRsvp(178) -AUTO&PIM&RIP&RAVP 179. autoBgpOspfIsisRsvp(179) -AUTO&BGP&OSPF&ISIS&RSVP 180. autoBgpOspfPimRsvp(180) -AUTO&BGP&OSPF&PIM&RSVP 181. autoBgpOspfRipRsvp(181) -AUTO&BGP&OSPF&RIP&RSVP 182. autoOspfIsisPimRsvp(182) -AUTO&OSPF&ISIS&PIM&RSVP 183. autoOspfIsisRipRsvp(183) -AUTO&OSPF&ISIS&RIP&RSVP 184. autoIsisPimRipRsvp(184) -AUTO&ISIS&PIM&RIP&RSVP 185. autoBgpOspfIsisPimRsvp(185) -AUTO&BGP&OSPF&ISIS&PIM&RSVP 186. autoBgpOspfIsisRipRsvp(186) -AUTO&BGP&OSPF&ISIS&RIP&RSVP 187. autoOspfIsisPimRipRsvp(187) -AUTO&OSPF&ISIS&PIM&RIP&RSVP 188. rsvp(188) -RSVP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noApplication(1), vrrp(2), ifnet(3), vrrpAndIfnet(4), bgp(5), ospf(6), bgpAndOspf(7), oamLspmL2vpn(8), oamTnlL2vpn(9), lspmL2vpnTnlps(10), oamMplsfwL2vpn(11), isis(12), vsiPw(13), vrrpOamLspmL2vpn(14), vrrpOamTnlL2vpn(15), vrrpLspmL2vpnTnlps(16), vrrpOamMplsfwL2vpn(17), pim(18), bgpIsis(19), bgpPim(20), ospfIsis(21), ospfPim(22), isisPim(23), bgpOspfIsis(24), bgpOspfPim(25), bgpIsisPim(26), ospfIsisPim(27), bgpOspfIsisPim(28), bgp6(29), ospfv3(30), isis6(31), pim6(32), bgp6Ospfv3(33), bgp6Isis6(34), bgp6Pim6(35), ospfv3Isis6(36), ospfv3Pim6(37), isis6Pim6(38), bgp6Ospfv3Isis6(39), bgp6Ospfv3Pim6(40), bgp6Isis6Pim6(41), ospfv3Isis6Pim6(42), bgp6Ospfv3Isis6Pim6(43), auto(44), autoIsis(45), autoOspf(46), autoBgp(47), autoPim(48), autoIsisOspf(49), autoIsisBgp(50), autoIsisPim(51), autoOspfBgp(52), autoOspfPim(53), autoBgpPim(54), autoIsisOspfBgp(55), autoIsisOspfBgpPim(56), autoIsis6(57), autoOspfv3(58), autoBgp6(59), autoPim6(60), autoIsis6Ospfv3(61), autoIsis6Bgp6(62), autoIsis6Pim6(63), autoOspfv3Bgp6(64), autoOspfv3Pim6(65), autoBgp6Pim6(66), autoIsis6Ospfv3Bgp6(67), autoIsis6Ospfv3Bgp6Pim6(68), etrunk(69), etrunkIfnet(70), etrunkVrrp(71), etrunkVrrpIfnet(72), etrunkOamLspmL2vpn(73), etrunkOamTnlL2vpn(74), etrunkLspmL2vpnTnlps(75), etrunkOamMplsfwL2vpn(76), etrunkvsiPw(77), etrunkOamLspmL2vpnVrrp(78), etrunkOamTnlL2vpnVrrp(79), etrunkLspmL2vpnTnlpsVrrp(80), etrunkOamMplsfwL2vpnVrrp(81), rip(82), bgpRip(83), ospfRip(84), isisRip(85), pimRip(86), bgpOspfRip(87), bgpIsisRip(88), bgpPimRip(89), ospfIsisRip(90), ospfPimRip(91), isisPimRip(92), bgpOspfIsisRip(93), bgpOspfPimRip(94), ospfIsisPimRip(95), autoRip(96), autoBgpRip(97), autoOspfRip(98), autoIsisRip(99), autoPimRip(100), autoBgpOspfRip(101), autoBgpIsisRip(102), autoBgpPimRip(103), autoOspfIsisRip(104), autoOspfPimRip(105), autoIsisPimRip(106), autoBgpOspfIsisRip(107), autoBgpOspfPimRip(108), autoOspfIsisPimRip(109), autoIsisOspfBgpPimVrrp(110), autoIsisOspfPimVrrp(111), autoIsisOspfBgpVrrp(112), autoIsisBgpPimVrrp(113), autoOspfBgpPimVrrp(114), autoIsisOspfVrrp(115), autoIsisBgpVrrp(116), autoOspfBgpVrrp(117), autoIsisPimVrrp(118), autoOspfPimVrrp(119), autoBgpPimVrrp(120), autoIsisVrrp(121), autoOspfVrrp(122), autoBgpVrrp(123), autoPimVrrp(124), autoVrrp(125), autoVrrpBgp6(126), autoOspfv3Isis6Pim6(127), autoOspfBgpPim(128), autoIsisOspfPim(129), autoIsisPimBgp(130), bgpOspfIsisPimRip(131), autoBgpOspfIsisPimRip(132), bgpRsvp(133), ospfRsvp(134), isisRsvp(135), pimRsvp(136), ripRsvp(137), bgpOspfRsvp(138), bgpIsisRsvp(139), bgpPimRsvp(140), bgpRipRsvp(141), ospfIsisRsvp(142), ospfPimRsvp(143), ospfRipRsvp(144), isisPimRsvp(145), isisRipRsvp(146), pimRipRsvp(147), bgpOspfIsisRsvp(148), bgpOspfPimRsvp(149), bgpOspfRipRsvp(150), bgpIsisPimRsvp(151), bgpIsisRipRsvp(152), bgpPimRipRsvp(153), ospfIsisPimRsvp(154), ospfIsisRipRsvp(155), isisPimRipRsvp(156), bgpOspfIsisPimRsvp(157), bgpOspfIsisRipRSvp(158), bgpOspfPimRipRsvp(159), bgpIsisPimRipRsvp(160), ospfIsisPimRipRsvp(161), bgpOspfIsisPimRipRsvp(162), autoRsvp(163), autoBgpRsvp(164), autoOspfRsvp(165), autoIsisRsvp(166), autoPimRsvp(167), autoRipRsvp(168), autoBgpOspfRsvp(169), autoBgpIsisRsvp(170), autoBgpPimRsvp(171), autoBgpRipRsvp(172), autoOspfIsisRsvp(173), autoOspfPimRsvp(174), autoOspfRipRsvp(175), autoIsisPimRsvp(176), autoIsisRipRsvp(177), autoPimRipRsvp(178), autoBgpOspfIsisRsvp(179), autoBgpOspfPimRsvp(180), autoBgpOspfRipRsvp(181), autoOspfIsisPimRsvp(182), autoOspfIsisRipRsvp(183), autoIsisPimRipRsvp(184), autoBgpOspfIsisPimRsvp(185), autoBgpOspfIsisRipRsvp(186), autoOspfIsisPimRipRsvp(187), rsvp(188)  

hwBfdSessDefaultIp 1.3.6.1.4.1.2011.5.25.38.2.3.1.24
BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

hwBfdSessPISFlag 1.3.6.1.4.1.2011.5.25.38.2.3.1.25
The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -ssociate with interface state 3. subif(3) -associate with interface and correlative sub interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2), subif(3)  

hwBfdSessBindType 1.3.6.1.4.1.2011.5.25.38.2.3.1.26
The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW; 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER interfaceIp(1), peerIp(2), sourceIp(3), ifAndSourceIp(4), fec(5), tunnelIf(6), ospf(7), isis(8), ldpLsp(9), staticLsp(10), teLsp(11), teTunnel(12), pw(13), vsiPw(15), ldpTunnel(21), bgpTunnel(22)  

hwBfdSessNextHop 1.3.6.1.4.1.2011.5.25.38.2.3.1.27
It is the next hop of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBfdSessStaticLspName 1.3.6.1.4.1.2011.5.25.38.2.3.1.28
It is the static LSP name of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

hwBfdSessLspIndex 1.3.6.1.4.1.2011.5.25.38.2.3.1.29
It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessPWSecondaryFlag 1.3.6.1.4.1.2011.5.25.38.2.3.1.30
The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2) -secondary PW 3. flagNoPW(3) -no PW Default: 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER flagMasterPW(1), flagSecondaryPW(2), flagNoPW(3)  

hwBfdSessTunnelDetectType 1.3.6.1.4.1.2011.5.25.38.2.3.1.31
Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down Default: 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER flagBothDown(1), flagNeighborDown(2)  

hwBfdSessVcId 1.3.6.1.4.1.2011.5.25.38.2.3.1.32
It is the ID of VC.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwBfdSessVsiName 1.3.6.1.4.1.2011.5.25.38.2.3.1.33
It is the name of VSI.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwBfdSessVsiPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.34
It is the peer-ip of VSI.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwBfdSessDiscrAuto 1.3.6.1.4.1.2011.5.25.38.2.3.1.35
Describe whether the discriminator can be auto allocated. Options: 1. enabled(1) -the discriminator can be allocated automatically 2. disabled(2) -the discriminator can not be allocated automatically Default: disabled
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessPeerIpv6Addr 1.3.6.1.4.1.2011.5.25.38.2.3.1.36
Define the peer IPv6 address of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessSourceIpv6Addr 1.3.6.1.4.1.2011.5.25.38.2.3.1.37
Define the source IPv6 address of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessIpv6NextHop 1.3.6.1.4.1.2011.5.25.38.2.3.1.38
It is the next hop of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

hwBfdSessIsIPv6Addr 1.3.6.1.4.1.2011.5.25.38.2.3.1.39
Whether the peer address of the BFD session is IPv6 address. Default: false
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwBfdSessMeticulous 1.3.6.1.4.1.2011.5.25.38.2.3.1.40
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type Default: 2
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessLooseAuthentication 1.3.6.1.4.1.2011.5.25.38.2.3.1.41
Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwBfdSessAuthenticationStatus 1.3.6.1.4.1.2011.5.25.38.2.3.1.42
Authentication status of the bfd session Options: 1. 0 -authentication disable 2. 1 -interface board do not support bfd authentication 3. 2 -keychain does not exist 4. 3 -auth BFD session number exceed 5. 4 -authentication in operation normally 100. 100 -exception Default: 0
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBfdSessOneArmEcho 1.3.6.1.4.1.2011.5.25.38.2.3.1.43
The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode Default: disabled
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessPWTtlMode 1.3.6.1.4.1.2011.5.25.38.2.3.1.44
The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually set 2. auto(2) -indicates that the TTL is automatically calculated based on an IP address 3. default(3) -indicates that the TTL is 255 by default 4. nottl(4) -indicates that the TTL is not in PW mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER config(1), auto(2), default(3), nottl(4)  

hwBfdSessPWTtl 1.3.6.1.4.1.2011.5.25.38.2.3.1.45
The value of this object identifies the TTL used by the BFD session for PW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

hwBfdSessRemotePeerIpType 1.3.6.1.4.1.2011.5.25.38.2.3.1.46
The value of this object identifies the type of the destination address of the BFD session for PW.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

hwBfdSessRemotePeerIp 1.3.6.1.4.1.2011.5.25.38.2.3.1.47
The value of this object identifies the destination IP address of the BFD session for PW.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

hwBfdSessSelectBoard 1.3.6.1.4.1.2011.5.25.38.2.3.1.48
This object indicates the main processing board of a BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..47)  

hwBfdSessPWSPE 1.3.6.1.4.1.2011.5.25.38.2.3.1.49
The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW 2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW 3. none(3) -indicates that a BFD session does not detect a PW Default: none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER upe(1), spe(2), none(3)  

hwBfdSessPWTrackIfName 1.3.6.1.4.1.2011.5.25.38.2.3.1.50
This object indicates the interface monitored by the BFD session for PW.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

hwBfdSessIsPWTrackIf 1.3.6.1.4.1.2011.5.25.38.2.3.1.51
The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD session for PW to monitor the interface 2. disabled(2) -disables the BFD session for PW from monitoring the interface
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwBfdSessEncapsulationType 1.3.6.1.4.1.2011.5.25.38.2.3.1.52
The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-nto1-vcc atm-nto1-vpc ip-layer2 atm-1to1-vcc atm-1to1-vpc atm-aal5-pdu satop-e1 satop-t1 esopsn-basic ip-interworking
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..63)  

hwBfdSessPEVid 1.3.6.1.4.1.2011.5.25.38.2.3.1.53
The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termination.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4094  

hwBfdSessCEVid 1.3.6.1.4.1.2011.5.25.38.2.3.1.54
The value of this object identifies the inner tag in QinQ packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4094  

hwBfdSessPeerInetAddrType 1.3.6.1.4.1.2011.5.25.38.2.3.1.55
The value of this object identifies the type of the destination address of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

hwBfdSessPeerInetAddr 1.3.6.1.4.1.2011.5.25.38.2.3.1.56
The value of this object identifies the destination IP address of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

hwBfdSessInetNextHopType 1.3.6.1.4.1.2011.5.25.38.2.3.1.57
The value of this object identifies the type of the next hop of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

hwBfdSessInetNextHop 1.3.6.1.4.1.2011.5.25.38.2.3.1.58
The value of this object identifies the next hop of the BFD session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

hwBfdSessBindAppTypeMask 1.3.6.1.4.1.2011.5.25.38.2.3.1.59
A value which indicates the set of applications that this BFD session binds. Every bit indicates a application. The corresponding bit and applications are as follows: bit application 0 IFNET 1 Route-Management 2 OSPF 3 ISISL1 4 ISISL2 5 PIM 6 ISISL1L2 7 BGP 8 VRRP 9 LSPM 10 RSVP 11 LDP 12 TE 13 Product Private APP 14 L2VPN 15 OAM_MANAGER 16 VTE 17 VPW 18 MPLSFW 19 VGMP 20 LSPV 21 VSI_PW 22 ETHOAM 23 AUTO 24 E-TRUNK 25 OSPFv3 26 ISISL1_6 27 ISISL2_6 28 PIM6 29 ISISL1L2_6 30 BGP6 31 RM6 32 RBS 33 RIP 34 FRP 35 BGPLSP
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBfdSessDscp 1.3.6.1.4.1.2011.5.25.38.2.3.1.60
This is the dscp value of bfd packet. 255 is invalid value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63 | 255  

hwBfdSessionPerTable 1.3.6.1.4.1.2011.5.25.38.2.4
This table specifies BFD Session performance counters. The index of this table is hwBfdSessPerIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdSessionPerEntry

hwBfdSessionPerEntry 1.3.6.1.4.1.2011.5.25.38.2.4.1
This table specifies BFD Session performance counters. The index of this entry is hwBfdSessPerIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdSessionPerEntry  

hwBfdSessPerIndex 1.3.6.1.4.1.2011.5.25.38.2.4.1.1
The index of BFD session statistics. This index is automatically allocated inside the system and is not user-configurable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2147483647  

hwBfdSessPerfPktIn 1.3.6.1.4.1.2011.5.25.38.2.4.1.2
The statistical information of the received Octets in local system in this session.The total received packet number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfPktInHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.3
The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfPktOut 1.3.6.1.4.1.2011.5.25.38.2.4.1.4
The statistical information of the send Packets in local system in this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfPktOutHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.5
The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfBadIn 1.3.6.1.4.1.2011.5.25.38.2.4.1.6
The statistical information of the received Errors in local system in this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfBadInHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.7
The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfBadOut 1.3.6.1.4.1.2011.5.25.38.2.4.1.8
The statistical information of the send Errors in local system in this session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfBadOutHC 1.3.6.1.4.1.2011.5.25.38.2.4.1.9
The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hwBfdSessPerfLastSessDownTime 1.3.6.1.4.1.2011.5.25.38.2.4.1.10
The time of session last time down.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBfdSessPerfSessDownCount 1.3.6.1.4.1.2011.5.25.38.2.4.1.11
The total count of session down.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessPerfSessShortBreakCount 1.3.6.1.4.1.2011.5.25.38.2.4.1.12
The total count of session shortbreak.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwBfdSessionPerStartTime 1.3.6.1.4.1.2011.5.25.38.2.4.1.13
The time that session start detection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBfdSlotTable 1.3.6.1.4.1.2011.5.25.38.2.5
The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this table is hwBfdSlotID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdSlotEntry

hwBfdSlotEntry 1.3.6.1.4.1.2011.5.25.38.2.5.1
The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this entry is hwBfdSlotID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdSlotEntry  

hwBfdSlotID 1.3.6.1.4.1.2011.5.25.38.2.5.1.1
The ID of slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..31  

hwBfdSlotReserveOneHopSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.2
The number of session reserving for one-hop session on the board.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..512  

hwBfdSlotOneHopSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.3
The number of session for one-hop session on the board.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..512  

hwBfdSlotCurrentSessNum 1.3.6.1.4.1.2011.5.25.38.2.5.1.4
The number of session on the board on current.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..512  

hwBfdSlotRowStatus 1.3.6.1.4.1.2011.5.25.38.2.5.1.5
Used to manage the creation and deletion of conceptual rows.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBfdTtlConfTable 1.3.6.1.4.1.2011.5.25.38.2.6
The TTL configuration table. The index of this table is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdTtlConfEntry

hwBfdTtlConfEntry 1.3.6.1.4.1.2011.5.25.38.2.6.1
The TTL configuration table. The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdTtlConfEntry  

hwBfdTtlConfAddr 1.3.6.1.4.1.2011.5.25.38.2.6.1.1
IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwBfdTtlConfMaskLen 1.3.6.1.4.1.2011.5.25.38.2.6.1.2
Length of IP address mask.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 8..32  

hwBfdTtlConfType 1.3.6.1.4.1.2011.5.25.38.2.6.1.3
Type of BFD session. Options: 1. singleHop(1) -single hop bfd session 2. multiHop(2) -multi hop bfd session
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER singleHop(1), multiHop(2)  

hwBfdTtlConfValue 1.3.6.1.4.1.2011.5.25.38.2.6.1.4
TTL value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

hwBfdTtlConfRowStatus 1.3.6.1.4.1.2011.5.25.38.2.6.1.50
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBfdPassiveAuthTable 1.3.6.1.4.1.2011.5.25.38.2.7
The authentication configuration table for entire dynamic bfd session on egress. The index of this table is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBfdPassiveAuthEntry

hwBfdPassiveAuthEntry 1.3.6.1.4.1.2011.5.25.38.2.7.1
The authentication configuration table for entire dynamic bfd session on egress. The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBfdPassiveAuthEntry  

hwBfdPassiveAuthPeerAddr 1.3.6.1.4.1.2011.5.25.38.2.7.1.1
Specify the Lsr-id IP address of the ingress.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hwBfdPassiveAuthProtocol 1.3.6.1.4.1.2011.5.25.38.2.7.1.2
Specify the protocol on ingress. Options: 1. te(1) -MPLS TE protocol 2. ldp(2) -MPLS LDP protocol
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..2  

hwBfdPassiveAuthKeychainName 1.3.6.1.4.1.2011.5.25.38.2.7.1.3
Specify the name of the keychain for authentication of entire dynamic bfd session.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..47)  

hwBfdPassiveAuthMeticulous 1.3.6.1.4.1.2011.5.25.38.2.7.1.4
Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type Default: 2
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwBfdPassiveAuthLoose 1.3.6.1.4.1.2011.5.25.38.2.7.1.5
Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hwBfdPassiveAuthRowStatus 1.3.6.1.4.1.2011.5.25.38.2.7.1.50
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBfdNotifications 1.3.6.1.4.1.2011.5.25.38.3
OBJECT IDENTIFIER    

hwBfdSessDown 1.3.6.1.4.1.2011.5.25.38.3.1
This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdSessUp 1.3.6.1.4.1.2011.5.25.38.3.2
This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdSessReachLimit 1.3.6.1.4.1.2011.5.25.38.3.3
There is the notify when the session number reach the global limit.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdSessReachLimitBindIf 1.3.6.1.4.1.2011.5.25.38.3.4
There is the notify when the session number reach the interface limit.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdSessReachLimitResume 1.3.6.1.4.1.2011.5.25.38.3.5
There is the notify when the session number reach the global limit was cleared.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdSessReachLimitBindIfResume 1.3.6.1.4.1.2011.5.25.38.3.6
There is the notify when the session number reach the interface limit was cleared.
Status: current Access: read-create
NOTIFICATION-TYPE    

hwBfdConformance 1.3.6.1.4.1.2011.5.25.38.4
OBJECT IDENTIFIER    

hwBfdCompliances 1.3.6.1.4.1.2011.5.25.38.4.1
OBJECT IDENTIFIER    

hwBfdFullCompliance 1.3.6.1.4.1.2011.5.25.38.4.1.1
The compliance statement for entities which implement the Huawei BFD MIB.
Status: current Access: read-create
MODULE-COMPLIANCE    

hwBfdGroups 1.3.6.1.4.1.2011.5.25.38.4.2
OBJECT IDENTIFIER    

hwBfdGroup 1.3.6.1.4.1.2011.5.25.38.4.2.1
A collection of objects providing BFD global information.
Status: current Access: read-create
OBJECT-GROUP    

hwBfdSessGroup 1.3.6.1.4.1.2011.5.25.38.4.2.2
A collection of objects providing BFD session information.
Status: current Access: read-create
OBJECT-GROUP    

hwBfdObsoleteGroup 1.3.6.1.4.1.2011.5.25.38.4.2.3
A collection of objects which are obsolete.
Status: obsolete Access: read-create
OBJECT-GROUP    

hwBfdNotificationGroup 1.3.6.1.4.1.2011.5.25.38.4.2.4
A collection of traps.
Status: current Access: read-create
NOTIFICATION-GROUP    

hwBfdTrapsVbOids 1.3.6.1.4.1.2011.5.25.38.5
OBJECT IDENTIFIER    

hwBfdSessVlanID 1.3.6.1.4.1.2011.5.25.38.5.1
The VLANID binding to BFD session.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hwBfdTraps 1.3.6.1.4.1.2011.5.25.38.6
OBJECT IDENTIFIER    

hwBfdCommonTraps 1.3.6.1.4.1.2011.5.25.38.6.1
OBJECT IDENTIFIER    

hwBfdAlarmTraps 1.3.6.1.4.1.2011.5.25.38.6.2
OBJECT IDENTIFIER    

hwBfdAlarmTrapsPrefix 1.3.6.1.4.1.2011.5.25.38.6.2.0
OBJECT IDENTIFIER    

hwBfdSessUpTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.1
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwBfdSessDownTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.2
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwBfdv6SingleHopSessUpTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.3
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwBfdv6SingleHopSessDownTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.4
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwBfdv6MultiHopSessUpTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.5
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hwBfdv6MultiHopSessDownTrap 1.3.6.1.4.1.2011.5.25.38.6.2.0.6
This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some other state.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE