HPR-MIB

File: HPR-MIB.mib (47223 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
SNA-NAU-MIB APPN-MIB

Imported symbols

DisplayString DateAndTime TimeStamp
TEXTUAL-CONVENTION Counter32 Gauge32
Unsigned32 TimeTicks OBJECT-TYPE
MODULE-IDENTITY MODULE-COMPLIANCE OBJECT-GROUP
snanauMIB SnaControlPointName

Defined Types

HprNceTypes  
TEXTUAL-CONVENTION    
  current BITS controlPoint(0), logicalUnit(1), boundaryFunction(2), routeSetup(3)

HprRtpCounter  
TEXTUAL-CONVENTION    
  current Counter32

HprAnrRoutingEntry  
SEQUENCE    
  hprAnrLabel STRING
  hprAnrType INTEGER
  hprAnrOutTgDest DisplayString
  hprAnrOutTgNum INTEGER
  hprAnrPacketsReceived Counter32
  hprAnrCounterDisconTime TimeStamp

HprNceEntry  
SEQUENCE    
  hprNceId STRING
  hprNceType HprNceTypes
  hprNceDefault HprNceTypes
  hprNceInstanceId STRING

HprRtpEntry  
SEQUENCE    
  hprRtpLocNceId STRING
  hprRtpLocTcid STRING
  hprRtpRemCpName SnaControlPointName
  hprRtpRemNceId STRING
  hprRtpRemTcid STRING
  hprRtpPathSwitchTrigger INTEGER
  hprRtpRscv STRING
  hprRtpTopic DisplayString
  hprRtpState INTEGER
  hprRtpUpTime TimeTicks
  hprRtpLivenessTimer Unsigned32
  hprRtpShortReqTimer Unsigned32
  hprRtpPathSwTimer Unsigned32
  hprRtpLivenessTimeouts HprRtpCounter
  hprRtpShortReqTimeouts HprRtpCounter
  hprRtpMaxSendRate Gauge32
  hprRtpMinSendRate Gauge32
  hprRtpCurSendRate Gauge32
  hprRtpSmRdTripDelay Gauge32
  hprRtpSendPackets HprRtpCounter
  hprRtpRecvPackets HprRtpCounter
  hprRtpSendBytes HprRtpCounter
  hprRtpRecvBytes HprRtpCounter
  hprRtpRetrPackets HprRtpCounter
  hprRtpPacketsDiscarded HprRtpCounter
  hprRtpDetectGaps HprRtpCounter
  hprRtpRateReqSends HprRtpCounter
  hprRtpOkErrPathSws HprRtpCounter
  hprRtpBadErrPathSws HprRtpCounter
  hprRtpOkOpPathSws HprRtpCounter
  hprRtpBadOpPathSws HprRtpCounter
  hprRtpCounterDisconTime TimeStamp

HprRtpStatusEntry  
SEQUENCE    
  hprRtpStatusLocNceId STRING
  hprRtpStatusLocTcid STRING
  hprRtpStatusIndex Unsigned32
  hprRtpStatusStartTime DateAndTime
  hprRtpStatusEndTime DateAndTime
  hprRtpStatusRemCpName SnaControlPointName
  hprRtpStatusRemNceId STRING
  hprRtpStatusRemTcid STRING
  hprRtpStatusNewRscv STRING
  hprRtpStatusOldRscv STRING
  hprRtpStatusCause INTEGER
  hprRtpStatusLastAttemptResult INTEGER

Defined Values

hprMIB 1.3.6.1.2.1.34.6
This is the MIB module for objects used to manage network devices with HPR capabilities.
MODULE-IDENTITY    

hprObjects 1.3.6.1.2.1.34.6.1
OBJECT IDENTIFIER    

hprGlobal 1.3.6.1.2.1.34.6.1.1
OBJECT IDENTIFIER    

hprNodeCpName 1.3.6.1.2.1.34.6.1.1.1
Administratively assigned network name for the APPN node where this HPR implementation resides. If this object has the same value as the appnNodeCpName object in the APPN MIB, then the two objects are referring to the same APPN node.
OBJECT-TYPE    
  SnaControlPointName  

hprOperatorPathSwitchSupport 1.3.6.1.2.1.34.6.1.1.2
This object indicates an implementation's level of support for an operator-requested path switch. notSupported(1) - the agent does not support operator-requested path switches switchTriggerSupported(2) - the agent supports a 'switch path now' command from an operator, but not a command to switch to a specified path switchToPathSupported(3) - the agent supports both a 'switch path now' command and a command to switch to a specified path. Note that the latter command is not available via this MIB; a system that supports it must do so via other means, such as a local operator interface.
OBJECT-TYPE    
  INTEGER notSupported(1), switchTriggerSupported(2), switchToPathSupported(3)  

hprAnrRouting 1.3.6.1.2.1.34.6.1.2
OBJECT IDENTIFIER    

hprAnrsAssigned 1.3.6.1.2.1.34.6.1.2.1
The count of ANR labels assigned by this node since it was last re-initialized. A Management Station can detect discontinuities in this counter by monitoring the appnNodeCounterDisconTime object in the APPN MIB.
OBJECT-TYPE    
  Counter32  

hprAnrCounterState 1.3.6.1.2.1.34.6.1.2.2
This object is used for a network management station to turn on/off the counting of ANR packets in the hprAnrRoutingTable. The initial value of this object is an implementation choice. notActive(1) - the counter hprAnrPacketsReceived returns no meaningful value active(2) - the counter hprAnrPacketsReceived is being incremented and is returning meaningful values
OBJECT-TYPE    
  INTEGER notActive(1), active(2)  

hprAnrCounterStateTime 1.3.6.1.2.1.34.6.1.2.3
The time when the hprAnrCounterState object last changed its value. The initial value returned by this object is the time at which the APPN node instrumented with this MIB was last brought up.
OBJECT-TYPE    
  DateAndTime  

hprAnrRoutingTable 1.3.6.1.2.1.34.6.1.2.4
The ANR Routing table provides a means of correlating an incoming ANR label (i.e., one assigned by this node) with the TG over which a packet containing the label will be forwarded. When the ANR label identifies a local NCE, the hprAnrOutTgDest and hprAnrOutTgNum objects have no meaning. The table also contains an object to count the number of packets received with a given ANR label.
OBJECT-TYPE    
  SEQUENCE OF  
    HprAnrRoutingEntry

hprAnrRoutingEntry 1.3.6.1.2.1.34.6.1.2.4.1
The ANR label is used to index this table.
OBJECT-TYPE    
  HprAnrRoutingEntry  

hprAnrLabel 1.3.6.1.2.1.34.6.1.2.4.1.1
The first ANR label in an incoming packet.
OBJECT-TYPE    
  STRING Size(1..8)  

hprAnrType 1.3.6.1.2.1.34.6.1.2.4.1.2
An object indicating whether an ANR label assigned by this node identifies a local NCE or a TG on which outgoing packets are forwarded. nce(1) - the ANR label identifies a local NCE. In this case the hprAnrOutTgDest and hprAnrOutTgNum objects have no meaning. tg(2) - the ANR label identifies a TG.
OBJECT-TYPE    
  INTEGER nce(1), tg(2)  

hprAnrOutTgDest 1.3.6.1.2.1.34.6.1.2.4.1.3
Destination node for the TG over which packets with this ANR label are forwarded. This is the fully qualified name of an APPN network node or end node, formatted according to the SnaControlPointName textual convention. If the ANR label identifies a local NCE, then this object returns a zero-length string. This object corresponds to the appnLocalTgDest object in the APPN MIB.
OBJECT-TYPE    
  DisplayString Size(03..17)  

hprAnrOutTgNum 1.3.6.1.2.1.34.6.1.2.4.1.4
Number of the TG over which packets with this ANR label are forwarded. If the ANR label identifies a local NCE, then this object returns the value 0, since 0 is not a valid TG number for a TG that supports HPR. This object corresponds to the appnLocalTgNum object in the APPN MIB.
OBJECT-TYPE    
  INTEGER 0..255  

hprAnrPacketsReceived 1.3.6.1.2.1.34.6.1.2.4.1.5
The count of packets received with this ANR label as their first label. A Management Station can detect discontinuities in this counter by monitoring the hprAnrCounterDisconTime object in the same row.
OBJECT-TYPE    
  Counter32  

hprAnrCounterDisconTime 1.3.6.1.2.1.34.6.1.2.4.1.6
The value of the sysUpTime object when the hprAnrPacketsReceived counter for this ANR label last experienced a discontinuity. This will be the more recent of two times: the time at which the ANR label was associated with either an outgoing TG or a local NCE, or the time at which the ANR counters were last turned on or off.
OBJECT-TYPE    
  TimeStamp  

hprTransportUser 1.3.6.1.2.1.34.6.1.3
OBJECT IDENTIFIER    

hprNceTable 1.3.6.1.2.1.34.6.1.3.1
The Network Connection Endpoint (NCE) table.
OBJECT-TYPE    
  SEQUENCE OF  
    HprNceEntry

hprNceEntry 1.3.6.1.2.1.34.6.1.3.1.1
The NCE ID is used to index this table.
OBJECT-TYPE    
  HprNceEntry  

hprNceId 1.3.6.1.2.1.34.6.1.3.1.1.1
The Network Connection Endpoint (NCE) ID. NCEs identify Control Points (Cp), Logical Units (Lu), HPR Boundary Functions (Bf) and Route Setup (Rs) Functions. A value for this object can be retrieved from any of the following objects in the APPN MIB: - appnLsCpCpNceId - appnLsRouteNceId - appnLsBfNceId - appnIsInRtpNceId - appnIsRtpNceId In each case this value identifies a row in this table containing information related to that in the APPN MIB.
OBJECT-TYPE    
  STRING Size(1..8)  

hprNceType 1.3.6.1.2.1.34.6.1.3.1.1.2
A bit string identifying the function types provided by this Network Connection Endpoint (NCE).
OBJECT-TYPE    
  HprNceTypes  

hprNceDefault 1.3.6.1.2.1.34.6.1.3.1.1.3
A bit string identifying the function types for which this Network Connection Endpoint (NCE) is the default NCE. While default NCEs are not explicitly defined in the architecture, some implementations provide them; for such implementations, it is useful to make this information available to a Management Station.
OBJECT-TYPE    
  HprNceTypes  

hprNceInstanceId 1.3.6.1.2.1.34.6.1.3.1.1.4
The NCE instance identifier (NCEII) identifying the current instance of this NCE. An NCEII is used to denote different instances (IPLs) of an NCE component. Each time an NCE is activated (IPL'd), it acquires a different, unique NCEII.
OBJECT-TYPE    
  STRING Size(4)  

hprRtp 1.3.6.1.2.1.34.6.1.4
OBJECT IDENTIFIER    

hprRtpGlobe 1.3.6.1.2.1.34.6.1.4.1
OBJECT IDENTIFIER    

hprRtpGlobeConnSetups 1.3.6.1.2.1.34.6.1.4.1.1
The count of RTP connection setups in which this node has participated, as either sender or receiver, since it was last re-initialized. Retries of a setup attempt do not cause the counter to be incremented. A Management Station can detect discontinuities in this counter by monitoring the appnNodeCounterDisconTime object in the APPN MIB.
OBJECT-TYPE    
  Counter32  

hprRtpGlobeCtrState 1.3.6.1.2.1.34.6.1.4.1.2
This object allows a network management station to turn the counters in the hprRtpTable on and off. The initial value of this object is an implementation choice. notActive(1) - the counters in the hprRtpTable are returning no meaningful values active(2) - the counters in the hprRtpTable are being incremented and are returning meaningful values
OBJECT-TYPE    
  INTEGER notActive(1), active(2)  

hprRtpGlobeCtrStateTime 1.3.6.1.2.1.34.6.1.4.1.3
The time when the value of the hprRtpGlobeCtrState object last changed. The initial value returned by this object is the time at which the APPN node instrumented with this MIB was last brought up.
OBJECT-TYPE    
  DateAndTime  

hprRtpTable 1.3.6.1.2.1.34.6.1.4.2
The RTP Connection table
OBJECT-TYPE    
  SEQUENCE OF  
    HprRtpEntry

hprRtpEntry 1.3.6.1.2.1.34.6.1.4.2.1
The local NCE ID and local TCID are used to index this table.
OBJECT-TYPE    
  HprRtpEntry  

hprRtpLocNceId 1.3.6.1.2.1.34.6.1.4.2.1.1
The local Network Connection Endpoint (NCE) ID of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components. A value for this object can be retrieved from any of the following objects in the APPN MIB: - appnLsCpCpNceId - appnLsRouteNceId - appnLsBfNceId - appnIsInRtpNceId - appnIsRtpNceId In each case this value identifies a row in this table containing information related to that in the APPN MIB.
OBJECT-TYPE    
  STRING Size(1..8)  

hprRtpLocTcid 1.3.6.1.2.1.34.6.1.4.2.1.2
The local TCID of this RTP connection. A value for this object can be retrieved from either the appnIsInRtpTcid object or the appnIsRtpTcid object the APPN MIB; in each case this value identifies a row in this table containing information related to that in the APPN MIB.
OBJECT-TYPE    
  STRING Size(8)  

hprRtpRemCpName 1.3.6.1.2.1.34.6.1.4.2.1.3
Administratively assigned network name for the remote node of this RTP connection.
OBJECT-TYPE    
  SnaControlPointName  

hprRtpRemNceId 1.3.6.1.2.1.34.6.1.4.2.1.4
The remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
OBJECT-TYPE    
  STRING Size(1..8)  

hprRtpRemTcid 1.3.6.1.2.1.34.6.1.4.2.1.5
The remote TCID of this RTP connection.
OBJECT-TYPE    
  STRING Size(8)  

hprRtpPathSwitchTrigger 1.3.6.1.2.1.34.6.1.4.2.1.6
Object by which a Management Station can trigger an operator- requested path switch, by setting the value to switchPathNow(2). Setting this object to switchPathNow(2) triggers a path switch even if its previous value was already switchPathNow(2). The value ready(1) is returned on GET operations until a SET has been processed; after that the value received on the most recent SET is returned. This MIB module provides no support for an operator-requested switch to a specified path.
OBJECT-TYPE    
  INTEGER ready(1), switchPathNow(2)  

hprRtpRscv 1.3.6.1.2.1.34.6.1.4.2.1.7
The forward Route Selection Control Vector for this RTP connection. The format of this vector is described in SNA Formats. The value returned in this object during a path switch is implementation-dependent: it may be the old path, the new path, a zero-length string, or some other valid RSCV string.
OBJECT-TYPE    
  STRING Size(0..255)  

hprRtpTopic 1.3.6.1.2.1.34.6.1.4.2.1.8
The topic for this RTP connection. This is used to indicate the Class of Service.
OBJECT-TYPE    
  DisplayString Size(8)  

hprRtpState 1.3.6.1.2.1.34.6.1.4.2.1.9
The state of the RTP connection, from the perspective of the local RTP protocol machine: rtpListening - connection open; waiting for other end to call in rtpCalling - connection opened, attempting to call out, have not yet received any data from other end rtpConnected - connection is active; responded to a call-in or received other end's TCID from a call-out attempt rtpPathSwitching - the path switch timer is running; attempting to find a new path for this connection. rtpDisconnecting - no sessions are using this connection; in process of bringing it down other - the connection is not in any of the states listed above.
OBJECT-TYPE    
  INTEGER rtpListening(1), rtpCalling(2), rtpConnected(3), rtpPathSwitching(4), rtpDisconnecting(5), other(99)  

hprRtpUpTime 1.3.6.1.2.1.34.6.1.4.2.1.10
The length of time the RTP connection has been up, measured in 1/100ths of a second.
OBJECT-TYPE    
  TimeTicks  

hprRtpLivenessTimer 1.3.6.1.2.1.34.6.1.4.2.1.11
The value of the liveness (ALIVE) timer of this RTP connection, in units of 1/100th of a second. When this timer expires and no packet has arrived from the partner since it was last set, packets with Status Request indicators will be sent to see if the RTP connection is still alive.
OBJECT-TYPE    
  Unsigned32  

hprRtpShortReqTimer 1.3.6.1.2.1.34.6.1.4.2.1.12
The value of the RTP SHORT_REQ timer, in units of 1/100 of a second. This timer represents the maximum time that a sender waits for a reply from a receiver.
OBJECT-TYPE    
  Unsigned32  

hprRtpPathSwTimer 1.3.6.1.2.1.34.6.1.4.2.1.13
The length of time that RTP should attempt a path switch for a connection, in units of 1/100th of a second.
OBJECT-TYPE    
  Unsigned32  

hprRtpLivenessTimeouts 1.3.6.1.2.1.34.6.1.4.2.1.14
The count of liveness timeouts for this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpShortReqTimeouts 1.3.6.1.2.1.34.6.1.4.2.1.15
The count of short request timeouts for this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpMaxSendRate 1.3.6.1.2.1.34.6.1.4.2.1.16
The high-water mark for this RTP connection's send rate, in units of bytes per second. This is the high-water mark for the entire life of the connection, not just the high-water mark for the connection's current path. For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Reference.
OBJECT-TYPE    
  Gauge32  

hprRtpMinSendRate 1.3.6.1.2.1.34.6.1.4.2.1.17
The low-water mark for this RTP connection's send rate, in units of bytes per second. This is the low-water mark for the entire life of the connection, not just the low-water mark for the connection's current path. For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Reference.
OBJECT-TYPE    
  Gauge32  

hprRtpCurSendRate 1.3.6.1.2.1.34.6.1.4.2.1.18
The current send rate for this RTP connection, in units of bytes per second. For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Reference.
OBJECT-TYPE    
  Gauge32  

hprRtpSmRdTripDelay 1.3.6.1.2.1.34.6.1.4.2.1.19
The smoothed round trip delay for this RTP connection, in units of 1/1000th of a second (ms). For more details on this and other parameters related to HPR, see the High Performance Routing Architecture Reference.
OBJECT-TYPE    
  Gauge32  

hprRtpSendPackets 1.3.6.1.2.1.34.6.1.4.2.1.20
The count of packets successfully sent on this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpRecvPackets 1.3.6.1.2.1.34.6.1.4.2.1.21
The count of packets received on this RTP connection. The counter is incremented only once if duplicate copies of a packet are received.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpSendBytes 1.3.6.1.2.1.34.6.1.4.2.1.22
The count of bytes sent on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpRecvBytes 1.3.6.1.2.1.34.6.1.4.2.1.23
The count of bytes received on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpRetrPackets 1.3.6.1.2.1.34.6.1.4.2.1.24
The count of packets retransmitted on this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpPacketsDiscarded 1.3.6.1.2.1.34.6.1.4.2.1.25
The count of packets received on this RTP connection and then discarded. A packet may be discarded because it is determined to be a duplicate, or for other reasons.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpDetectGaps 1.3.6.1.2.1.34.6.1.4.2.1.26
The count of gaps detected on this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpRateReqSends 1.3.6.1.2.1.34.6.1.4.2.1.27
The count of Rate Requests sent on this RTP connection.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpOkErrPathSws 1.3.6.1.2.1.34.6.1.4.2.1.28
The count of successful path switch attempts for this RTP connection due to errors.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpBadErrPathSws 1.3.6.1.2.1.34.6.1.4.2.1.29
The count of unsuccessful path switches for this RTP connection due to errors.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpOkOpPathSws 1.3.6.1.2.1.34.6.1.4.2.1.30
The count of successful path switches for this RTP connection due to operator requests.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpBadOpPathSws 1.3.6.1.2.1.34.6.1.4.2.1.31
The count of unsuccessful path switches for this RTP connection due to operator requests. This counter is not incremented by an implementation that does not support operator-requested path switches, even if a Management Station requests such a path switch by setting the hprRtpPathSwitchTrigger object.
OBJECT-TYPE    
  HprRtpCounter  

hprRtpCounterDisconTime 1.3.6.1.2.1.34.6.1.4.2.1.32
The value of the sysUpTime object when the counters for this RTP connection last experienced a discontinuity. This will be the more recent of two times: the time at which the connection was established or the time at which the HPR counters were last turned on or off.
OBJECT-TYPE    
  TimeStamp  

hprRtpStatusTable 1.3.6.1.2.1.34.6.1.4.3
RTP Connection Status Table: This table contains historical information on RTP connections. An entry is created in this table when a path switch is completed, either successfully or unsuccessfully.
OBJECT-TYPE    
  SEQUENCE OF  
    HprRtpStatusEntry

hprRtpStatusEntry 1.3.6.1.2.1.34.6.1.4.3.1
This table is indexed by local NCE ID, local TCID, and an integer hprRtpStatusIndex. Thus the primary grouping of table rows is by RTP connection, with the multiple entries for a given RTP connection ordered by time.
OBJECT-TYPE    
  HprRtpStatusEntry  

hprRtpStatusLocNceId 1.3.6.1.2.1.34.6.1.4.3.1.1
The local Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
OBJECT-TYPE    
  STRING Size(1..8)  

hprRtpStatusLocTcid 1.3.6.1.2.1.34.6.1.4.3.1.2
The local TCID of this RTP connection.
OBJECT-TYPE    
  STRING Size(8)  

hprRtpStatusIndex 1.3.6.1.2.1.34.6.1.4.3.1.3
Table index. This value begins at one and is incremented when a new entry is added to the table. It is an implementation choice whether to run a single counter for all entries in the table, or to run a separate counter for the entries for each RTP connection. In the unlikely event of a wrap, it is assumed that Management Stations will have the ability to order table entries correctly.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hprRtpStatusStartTime 1.3.6.1.2.1.34.6.1.4.3.1.4
The time when the path switch began.
OBJECT-TYPE    
  DateAndTime  

hprRtpStatusEndTime 1.3.6.1.2.1.34.6.1.4.3.1.5
The time when the path switch was ended, either successfully or unsuccessfully.
OBJECT-TYPE    
  DateAndTime  

hprRtpStatusRemCpName 1.3.6.1.2.1.34.6.1.4.3.1.6
Administratively assigned network name for the remote node of this RTP connection.
OBJECT-TYPE    
  SnaControlPointName  

hprRtpStatusRemNceId 1.3.6.1.2.1.34.6.1.4.3.1.7
The remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
OBJECT-TYPE    
  STRING Size(1..8)  

hprRtpStatusRemTcid 1.3.6.1.2.1.34.6.1.4.3.1.8
The remote TCID of this RTP connection.
OBJECT-TYPE    
  STRING Size(8)  

hprRtpStatusNewRscv 1.3.6.1.2.1.34.6.1.4.3.1.9
The new Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation does not save RSCVs.
OBJECT-TYPE    
  STRING Size(0..255)  

hprRtpStatusOldRscv 1.3.6.1.2.1.34.6.1.4.3.1.10
The old Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation does not save RSCVs.
OBJECT-TYPE    
  STRING Size(0..255)  

hprRtpStatusCause 1.3.6.1.2.1.34.6.1.4.3.1.11
The reason for the path switch: other(1) - Reason other than those listed below, rtpConnFail(2) - RTP connection failure detected, locLinkFail(3) - Local link failure, remLinkFail(4) - Remote link failure (learned from TDUs), operRequest(5) - Operator requested path switch.
OBJECT-TYPE    
  INTEGER other(1), rtpConnFail(2), locLinkFail(3), remLinkFail(4), operRequest(5)  

hprRtpStatusLastAttemptResult 1.3.6.1.2.1.34.6.1.4.3.1.12
The result of the last completed path switch attempt. If the path switch is aborted in the middle of a path switch attempt because the path switch timer expires, the result of the previous path switch attempt is reported. The values are defined as follows: successful(1) - The final path switch attempt was successful. initiatorMoving(2) - The final path switch attempt failed because the initiator is mobile, and there was no active link out of this node. directorySearchFailed(3) - The final path switch attempt failed because a directory search for the destination node's CP name failed. rscvCalculationFailed(4) - The final path switch attempt failed because an RSCV to the node containing the remote RTP endpoint could not be calculated. negativeRouteSetupReply(5) - The final path switch attempt failed because route setup failed for the new path. backoutRouteSetupReply(6) - The final path switch attempt failed because the remote RTP endpoint refused to continue the RTP connection. timeoutDuringFirstAttempt(7) - The path switch timer expired during the first path switch attempt. otherUnsuccessful(8) - The final path switch attempt failed for a reason other than those listed above.
OBJECT-TYPE    
  INTEGER successful(1), initiatorMoving(2), directorySearchFailed(3), rscvCalculationFailed(4), negativeRouteSetupReply(5), backoutRouteSetupReply(6), timeoutDuringFirstAttempt(7), otherUnsuccessful(8)  

hprConformance 1.3.6.1.2.1.34.6.2
OBJECT IDENTIFIER    

hprCompliances 1.3.6.1.2.1.34.6.2.1
OBJECT IDENTIFIER    

hprGroups 1.3.6.1.2.1.34.6.2.2
OBJECT IDENTIFIER    

hprCompliance 1.3.6.1.2.1.34.6.2.1.1
The hprRtpConfGroup is mandatory for HPR implementations supporting the HPR transport tower.
MODULE-COMPLIANCE    

hprGlobalConfGroup 1.3.6.1.2.1.34.6.2.2.1
A collection of objects providing the instrumentation of HPR general information and capabilities.
OBJECT-GROUP    

hprAnrRoutingConfGroup 1.3.6.1.2.1.34.6.2.2.2
A collection of objects providing instrumentation for the node's ANR routing.
OBJECT-GROUP    

hprTransportUserConfGroup 1.3.6.1.2.1.34.6.2.2.3
A collection of objects providing information on the users of the HPR transport known to the node.
OBJECT-GROUP    

hprRtpConfGroup 1.3.6.1.2.1.34.6.2.2.4
A collection of objects providing the instrumentation for RTP connection end points.
OBJECT-GROUP