HPNSACAGE-MIB

File: HPNSACAGE-MIB.mib (20989 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

Opaque enterprises DisplayString
OBJECT-TYPE

Defined Types

HpCageAgtDriveEntryDef  
SEQUENCE    
  hpCageAgtDriveIndex INTEGER
  hpCageAgtDriveI2cAddr INTEGER 0..65535
  hpCageAgtDriveScsiID INTEGER 0..7
  hpCageAgtDriveLEDState INTEGER 0..1
  hpCageAgtDriveLEDSetStatus INTEGER
  hpCageAgtDrivePresent INTEGER 0..1
  hpCageAgtCageChannel INTEGER 0..255
  hpCageAgtCageAdapter INTEGER 0..255
  hpCageAgtCageType INTEGER 0..255

Defined Values

hp 1.3.6.1.4.1.11
OBJECT IDENTIFIER    

nm 1.3.6.1.4.1.11.2
OBJECT IDENTIFIER    

hpnsa 1.3.6.1.4.1.11.2.23
OBJECT IDENTIFIER    

hpCageAgt 1.3.6.1.4.1.11.2.23.28
OBJECT IDENTIFIER    

hpCageAgtVersion 1.3.6.1.4.1.11.2.23.28.1
The current version (major) number of the SNMP agent.
OBJECT-TYPE    
  INTEGER 0..65535  

hpCageAgtRevision 1.3.6.1.4.1.11.2.23.28.2
The current revision (minor) number of the SNMP agent.
OBJECT-TYPE    
  INTEGER 0..65535  

hpCageAgtMibVersion 1.3.6.1.4.1.11.2.23.28.3
The current version (major) number of the SNMP agent's MIB.
OBJECT-TYPE    
  INTEGER 0..65535  

hpCageAgtMibRevision 1.3.6.1.4.1.11.2.23.28.4
The current revision (minor) number of the SNMP agent's MIB.
OBJECT-TYPE    
  INTEGER 0..65535  

hpCageAgtnDrieCages 1.3.6.1.4.1.11.2.23.28.5
The number of Starfish drive cages present on the system.
OBJECT-TYPE    
  INTEGER  

hpCageAgtcbDriveCageInfo 1.3.6.1.4.1.11.2.23.28.6
The number of bytes required to represent the drive cage information struucture.
OBJECT-TYPE    
  INTEGER  

hpCageAgtDriveCageInfo 1.3.6.1.4.1.11.2.23.28.7
The drive cage information structure, defining the state and addresses of each drive bay.
OBJECT-TYPE    
  Opaque  

hpCageAgtDriveCageStatus 1.3.6.1.4.1.11.2.23.28.8
The result of the last query operation for drive cage data. This value is set by querying the hpCageAgtDriveCageInfo object.
OBJECT-TYPE    
  INTEGER  

hpCageAgtFlashAdptrType 1.3.6.1.4.1.11.2.23.28.9
The type of adapter to be flashed. This must be set prior to setting the flash count.
OBJECT-TYPE    
  INTEGER  

hpCageAgtFlashAdptrNum 1.3.6.1.4.1.11.2.23.28.10
The adapter number to be flashed. This must be set prior to setting the flash count.
OBJECT-TYPE    
  INTEGER  

hpCageAgtChannelNum 1.3.6.1.4.1.11.2.23.28.11
The channel number to be flashed. This must be set prior to setting the flash count.
OBJECT-TYPE    
  INTEGER  

hpCageAgtFlashCount 1.3.6.1.4.1.11.2.23.28.12
The number of times to activate the flashing of the LEDs. (See members 9, 10, and 11.)
OBJECT-TYPE    
  INTEGER  

hpCageAgtFlashStatus 1.3.6.1.4.1.11.2.23.28.13
The resulting status of the last setting of the flash count operation. If this value is 99999999, then the operation is still pending.
OBJECT-TYPE    
  INTEGER  

hpCageAgtTargetID 1.3.6.1.4.1.11.2.23.28.16
The channel number to be flashed. This must be set prior to setting the flash count.
OBJECT-TYPE    
  INTEGER  

hpCageAgtFlashOneCount 1.3.6.1.4.1.11.2.23.28.17
The number of times to activate the flashing of one LED. (See members 9, 10, 11, and 16.)
OBJECT-TYPE    
  INTEGER  

hpCageAgtFWStatus 1.3.6.1.4.1.11.2.23.28.18
The resulting status of the last firmware update operation. If this value is 99999999, then the operation is still pending.
OBJECT-TYPE    
  INTEGER  

hpCageAgtUpdateDriveFW 1.3.6.1.4.1.11.2.23.28.19
Set this value to the key 746E654Bh to begin updating firmware on drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)
OBJECT-TYPE    
  INTEGER  

hpCageAgtDriveReadiness 1.3.6.1.4.1.11.2.23.28.20
Determine the state of readiness for the drive. (See members 9, 10, 11, and 16.)
OBJECT-TYPE    
  INTEGER not-present(0), present(1), unit-ready(2), readable(3), configured(4), accessible(5)  

hpCageAgtnDrives 1.3.6.1.4.1.11.2.23.28.14
The number of hot-swap drives present on the system. Requery the nDriveCages field to recalculate this field.
OBJECT-TYPE    
  INTEGER  

hpCageAgtDriveTable 1.3.6.1.4.1.11.2.23.28.15
A list of the hot-swap drives present on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    HpCageAgtDriveEntryDef

hpCageAgtDriveEntry 1.3.6.1.4.1.11.2.23.28.15.1
Tok_String
OBJECT-TYPE    
  HpCageAgtDriveEntryDef  

hpCageAgtDriveIndex 1.3.6.1.4.1.11.2.23.28.15.1.1
The index number of the drive.
OBJECT-TYPE    
  INTEGER  

hpCageAgtDriveI2cAddr 1.3.6.1.4.1.11.2.23.28.15.1.2
The IIC (I-square-C) bus address of the drive.
OBJECT-TYPE    
  INTEGER 0..65535  

hpCageAgtDriveScsiID 1.3.6.1.4.1.11.2.23.28.15.1.3
The SCSI target ID of the drive (unique to the IIC bus).
OBJECT-TYPE    
  INTEGER 0..15  

hpCageAgtDriveLEDState 1.3.6.1.4.1.11.2.23.28.15.1.4
The state of the drive LED, which can be set to amber (on).
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpCageAgtDriveLEDSetStatus 1.3.6.1.4.1.11.2.23.28.15.1.5
The result of the last LED state change operation for this drive.
OBJECT-TYPE    
  INTEGER  

hpCageAgtDrivePresent 1.3.6.1.4.1.11.2.23.28.15.1.6
Is a drive present in this drive cage bay?
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

hpCageAgtCageChannel 1.3.6.1.4.1.11.2.23.28.15.1.7
The channel number on the SCSI adapter to which this cage is connected.
OBJECT-TYPE    
  INTEGER 0..255  

hpCageAgtCageAdapter 1.3.6.1.4.1.11.2.23.28.15.1.8
The port number of the SCSI adapter to which this cage is connected.
OBJECT-TYPE    
  INTEGER 0..255  

hpCageAgtCageType 1.3.6.1.4.1.11.2.23.28.15.1.9
The type of the hot-swap cage.
OBJECT-TYPE    
  INTEGER unknown(0), sf1(1), sf2(2), safte(16), sf3(19), cheapsafte(48)  

hpCageAgtDownloadWwwUrl 1.3.6.1.4.1.11.2.23.28.21
Set this value to the URL to begin downloading. Check member 21 for progress and 22 for status.
OBJECT-TYPE    
  DisplayString  

hpCageAgtDownloadSize 1.3.6.1.4.1.11.2.23.28.22
Current size (in bytes) of the amount of data downloaded for this file. If less than 10 bytes reported, size is actually state info: (0 = no download, 1 = download in progress, 2 = download complete, 3 = download failed).
OBJECT-TYPE    
  INTEGER  

hpCageAgtDownloadStatus 1.3.6.1.4.1.11.2.23.28.23
The resulting status of the most recent (or current) WWW download operation. If this value is 99999999, then the operation is still pending.
OBJECT-TYPE    
  INTEGER  

hpCageAgtDownloadProxy 1.3.6.1.4.1.11.2.23.28.24
Set this value to the WWW proxy server spec (eg: WWW_PROXY.XXX.COM:8088).
OBJECT-TYPE    
  DisplayString  

hpCageAgtFormatDrive 1.3.6.1.4.1.11.2.23.28.25
Set this value to the key 6B72614Dh to begin formatting drive indicated in SCSI ID. (See members 9, 10, 11, and 16.)
OBJECT-TYPE    
  INTEGER  

hpCageAgtFormatStatus 1.3.6.1.4.1.11.2.23.28.26
The resulting status of the last formatoperation. If this value is 99999999, then the operation is still pending. If 99999990, then user input is pending allowing the operation locally.
OBJECT-TYPE    
  INTEGER