HPN-ICF-TRAP-MIB

File: HPN-ICF-TRAP-MIB.mib (24278 bytes)

Imported modules

SNMPv2-SMI SNMP-FRAMEWORK-MIB IF-MIB
SNMPv2-TC INET-ADDRESS-MIB HPN-ICF-OID-MIB

Imported symbols

IpAddress SnmpAdminString ifIndex
ifDescr InterfaceIndex RowStatus
TAddress TruthValue Integer32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
InetAddressType InetAddress hpnicfCommon

Defined Types

HpnicfDetailRtTrapEntry  
SEQUENCE    
  hpnicfDetailRtProType INTEGER
  hpnicfDetailRtEnable INTEGER

HpnicfTrapDesInfoEntry  
SEQUENCE    
  hpnicfTrapDesInfoIndex Integer32
  hpnicfTrapDesIPAddress IpAddress
  hpnicfTrapDesPort Integer32
  hpnicfTrapDesRowStatus RowStatus
  hpnicfTrapDesAddrTAddress TAddress

HpnicfTrapConfigEntry  
SEQUENCE    
  hpnicfTrapConfigIndex Integer32
  hpnicfTrapConfigName SnmpAdminString
  hpnicfTrapConfigDescr SnmpAdminString
  hpnicfTrapConfigSwitch INTEGER
  hpnicfTrapConfigSwitch2 INTEGER

Defined Values

hpnicfTrap 1.3.6.1.4.1.11.2.14.11.15.2.38
This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
MODULE-IDENTITY    

hpnicfTableGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1
OBJECT IDENTIFIER    

hpnicfMacTabStatGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1
OBJECT IDENTIFIER    

hpnicfMacTabTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.1
Indicates whether hpnicfMacTabFullTrap and hpnicfMacTabAlmostFullTrap traps should be generated when the MAC table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfMacTabTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.2
Definition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..3600  

hpnicfMacTabTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3
OBJECT IDENTIFIER    

hpnicfMacTabLen 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3.1
The length of the MAC table.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfMacTabTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4
OBJECT IDENTIFIER    

hpnicfMacTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.1
Send this trap when the MAC table is filled. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfMacTabAlmostFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.2
Send this trap when the MAC table is almost full. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfArpTabStatGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2
OBJECT IDENTIFIER    

hpnicfArpTabTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.1
Indicates whether hpnicfArpTabFullTrap traps should be generated when the ARP table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfArpTabTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.2
Definition of the minimum interval between two traps which occur when the ARP table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..3600  

hpnicfArpTabTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3
OBJECT IDENTIFIER    

hpnicfArpTabLen 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3.1
The length of the ARP table.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfArpTabTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4
OBJECT IDENTIFIER    

hpnicfArpTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.1
Send this trap when the ARP table is filled. The interval between two traps generated should be longer than hpnicfArpTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfArpPortDynamicEntryFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.2
Send this trap when the dynamic ARP number of the port exceeds the limitation. The object hpnicfArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than hpnicfArpTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfRtTabStatGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3
OBJECT IDENTIFIER    

hpnicfDetailRtTrapTable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1
This table contains objects to decide what kind of trap should be sent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDetailRtTrapEntry

hpnicfDetailRtTrapEntry 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDetailRtTrapEntry  

hpnicfDetailRtProType 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.1
The index value which uniquely identifies an entry in the hpnicfDetailRtTrapTable.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER other(1), local(2), rip(3), isis(4), ospf(5), bgp(6)  

hpnicfDetailRtEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.2
Indicates whether hpnicfDetailRtTabFullTrap traps should be generated when a specific routing table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfRtTabTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.2
Indicates whether hpnicfRtTabFullTrap traps should be generated when the routing table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfRtTabTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.3
Definition of the minimum interval between two traps which occur when the routing table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..3600  

hpnicfRtTabTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4
OBJECT IDENTIFIER    

hpnicfRtTabLen 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.1
The length of the routing table. The detail routing tables also use the same object.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfDefaultRtNextHopType 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.2
The IP address type of the next hop of the default route. The value must be ipv4 or ipv6
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

hpnicfDefaultRtNextHop 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.3
The IP address of the next hop of the default route.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

hpnicfDefaultRtOutIf 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.4
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndex  

hpnicfRtTabTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5
OBJECT IDENTIFIER    

hpnicfRtTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.1
Send this trap when the routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfDetailRtTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.2
Send this trap when the detail routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfDefaultRtDelTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.3
Send this trap when the default route is deleted.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfDefaultRtDelTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.6
Indicates whether hpnicfDefaultRtDelTrap traps should be generated when the default route is deleted.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfMulticastTabStatGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4
OBJECT IDENTIFIER    

hpnicfMulticastTabTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.1
Indicates whether hpnicfMulticastTabFullTrap traps should be generated when the multicast table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfMulticastTabTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.2
Definition of the minimum interval between two traps which occur when the multicast table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..3600  

hpnicfMulticastTabTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3
OBJECT IDENTIFIER    

hpnicfMulticastTabType 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.1
Defining the type of the multicast table, layer2 or layer3.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER lay2(1), lay3(2)  

hpnicfMulticastTabLen 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.2
The length of the multicast table.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfMulticastTabTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4
OBJECT IDENTIFIER    

hpnicfMulticastTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4.1
Send this trap when the multicast table is filled. The interval between two traps generated should be longer than hpnicfMulticastTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfNdTabStatGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5
OBJECT IDENTIFIER    

hpnicfNdTabTrapEnable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.1
Indicates whether hpnicfNdTabFullTrap traps should be generated when the ND table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfNdTabTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.2
Definition of the minimum interval between two traps which occur when the ND table is filled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..3600  

hpnicfNdTabTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3
OBJECT IDENTIFIER    

hpnicfNdTabLen 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3.1
The length of the ND table.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfNdTabTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4
OBJECT IDENTIFIER    

hpnicfNdTabFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4.1
Send this trap when the ND table is filled. The interval between two traps generated should be longer than hpnicfNdTabTrapInterval.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfPeriodicalTrapGroup 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6
OBJECT IDENTIFIER    

hpnicfPeriodicalTrapObjects 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1
OBJECT IDENTIFIER    

hpnicfPeriodicalTrapInterval 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.1
Definition of the periodical interval. If no trap occurs during the certain interval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 10..3600  

hpnicfPeriodicalTrapSwitch 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.2
Definition of the periodical switch. If the value is off,the hpnicfPeriodicalTrap will not be generated. the hpnicfPeriodicalTrapInterval will be set to 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfPeriodicalTrapSwitch2 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.3
Periodical heartbeat trap sending switch. If the value is off, the hpnicfPeriodicalTrap will not be generated, and the hpnicfPeriodicalTrapInterval will be set to 0. This node differs from hpnicfPeriodicalTrapSwitch in value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfPeriodicalTrapInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.2
OBJECT IDENTIFIER    

hpnicfPeriodicalNotification 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3
OBJECT IDENTIFIER    

hpnicfPeriodicalNotificationPrefix 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0
OBJECT IDENTIFIER    

hpnicfPeriodicalTrap 1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0.1
If no trap occurs during the interval spicified by hpnicfPeriodicalTrapInterval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated.
Status: current Access: read-write
NOTIFICATION-TYPE    

hpnicfTrapDesInfo 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7
OBJECT IDENTIFIER    

hpnicfTrapDesInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1
A table of trap destination host address and port .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTrapDesInfoEntry

hpnicfTrapDesInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1
The entry of trap destination host address and port.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfTrapDesInfoEntry  

hpnicfTrapDesInfoIndex 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..20  

hpnicfTrapDesIPAddress 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.2
The host IP address of the trap destination.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfTrapDesPort 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.3
The port of the trap destination.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfTrapDesRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.4
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfTrapDesAddrTAddress 1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.5
This object contains a transport address.
Status: current Access: read-create
OBJECT-TYPE    
  TAddress  

hpnicfTrapConfig 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8
OBJECT IDENTIFIER    

hpnicfTrapConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1
A table of trap configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTrapConfigEntry

hpnicfTrapConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1
The entry of trap configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfTrapConfigEntry  

hpnicfTrapConfigIndex 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfTrapConfigName 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.2
The name of the appointed traps.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..127)  

hpnicfTrapConfigDescr 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.3
The description of the appointed traps.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..127)  

hpnicfTrapConfigSwitch 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.4
Indicates whether the specified traps should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfTrapConfigSwitch2 1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.5
Indicates whether the specified traps should be generated. This node differs from hpnicfTrapConfigSwitch in value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor