HPN-ICF-TRANSCEIVER-INFO-MIB

File: HPN-ICF-TRANSCEIVER-INFO-MIB.mib (22504 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
HPN-ICF-OID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
TruthValue	ifIndex	hpnicfCommon

Defined Types

HpnicfTransceiverInfoEntry
SEQUENCE
	hpnicfTransceiverHardwareType	OCTET STRING
	hpnicfTransceiverType	OCTET STRING
	hpnicfTransceiverWaveLength	Integer32
	hpnicfTransceiverVendorName	OCTET STRING
	hpnicfTransceiverSerialNumber	OCTET STRING
	hpnicfTransceiverFiberDiameterType	INTEGER
	hpnicfTransceiverTransferDistance	Integer32
	hpnicfTransceiverDiagnostic	TruthValue
	hpnicfTransceiverCurTXPower	Integer32
	hpnicfTransceiverMaxTXPower	Integer32
	hpnicfTransceiverMinTXPower	Integer32
	hpnicfTransceiverCurRXPower	Integer32
	hpnicfTransceiverMaxRXPower	Integer32
	hpnicfTransceiverMinRXPower	Integer32
	hpnicfTransceiverTemperature	Integer32
	hpnicfTransceiverVoltage	Integer32
	hpnicfTransceiverBiasCurrent	Integer32
	hpnicfTransceiverTempHiAlarm	Integer32
	hpnicfTransceiverTempLoAlarm	Integer32
	hpnicfTransceiverTempHiWarn	Integer32
	hpnicfTransceiverTempLoWarn	Integer32
	hpnicfTransceiverVccHiAlarm	Integer32
	hpnicfTransceiverVccLoAlarm	Integer32
	hpnicfTransceiverVccHiWarn	Integer32
	hpnicfTransceiverVccLoWarn	Integer32
	hpnicfTransceiverBiasHiAlarm	Integer32
	hpnicfTransceiverBiasLoAlarm	Integer32
	hpnicfTransceiverBiasHiWarn	Integer32
	hpnicfTransceiverBiasLoWarn	Integer32
	hpnicfTransceiverPwrOutHiAlarm	Integer32
	hpnicfTransceiverPwrOutLoAlarm	Integer32
	hpnicfTransceiverPwrOutHiWarn	Integer32
	hpnicfTransceiverPwrOutLoWarn	Integer32
	hpnicfTransceiverRcvPwrHiAlarm	Integer32
	hpnicfTransceiverRcvPwrLoAlarm	Integer32
	hpnicfTransceiverRcvPwrHiWarn	Integer32
	hpnicfTransceiverRcvPwrLoWarn	Integer32
	hpnicfTransceiverErrors	BITS

HpnicfTransceiverChannelEntry
SEQUENCE
	hpnicfTransceiverChannelIndex	Integer32
	hpnicfTransceiverChannelCurTXPower	Integer32
	hpnicfTransceiverChannelCurRXPower	Integer32
	hpnicfTransceiverChannelTemperature	Integer32
	hpnicfTransceiverChannelBiasCurrent	Integer32

Defined Values

hpnicfTransceiver		1.3.6.1.4.1.11.2.14.11.15.2.70
The objects in this MIB module are used to display the information of transceiver on interface.
MODULE-IDENTITY

hpnicfTransceiverInfoAdm		1.3.6.1.4.1.11.2.14.11.15.2.70.1
OBJECT IDENTIFIER

hpnicfTransceiverInfoTable		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1
This table show the information of transceiver on interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfTransceiverInfoEntry

hpnicfTransceiverInfoEntry		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1
The entry of the hpnicfTransceiverInfoTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfTransceiverInfoEntry

hpnicfTransceiverHardwareType		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1
Hardware type of the interface, such as SM(single mode).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfTransceiverType		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2
Type of the interface, such as SFP/XFP/GBIC.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfTransceiverWaveLength		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3
Wave length of the interface, measured in nanometer.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVendorName		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4
Vendor name of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfTransceiverSerialNumber		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5
Serial number of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfTransceiverFiberDiameterType		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6
The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fiber9(1), fiber50(2), fiber625(3), copper(4), unknown(65535)

hpnicfTransceiverTransferDistance		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7
The maximal distance which the interface could transmit, measured in meter.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverDiagnostic		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8
Indicating the digital diagnostic monitoring function .
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfTransceiverCurTXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9
Indicating the current transmitted power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverMaxTXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10
Indicating the maximal transmitted power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverMinTXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11
Indicating the minimal transmitted power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverCurRXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12
Indicating the current received power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverMaxRXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13
Indicating the maximal received power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverMinRXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14
Indicating the minimal received power . The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverTemperature		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15
Indicating the current temperature. The unit is Celsius centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVoltage		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16
Indicating the current voltage . The unit is in hundredths of V
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverBiasCurrent		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17
Indicating the current bias electric current . The unit is in hundredths of mA
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverTempHiAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18
Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverTempLoAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19
Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverTempHiWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20
Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverTempLoWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21
Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVccHiAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22
Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVccLoAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23
Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVccHiWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24
Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverVccLoWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25
Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverBiasHiAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26
Transceiver bias high alarm threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverBiasLoAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27
Transceiver bias low alarm threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverBiasHiWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28
Transceiver bias high warning threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverBiasLoWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29
Transceiver bias low warning threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverPwrOutHiAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30
Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverPwrOutLoAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31
Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverPwrOutHiWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32
Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverPwrOutLoWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33
Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverRcvPwrHiAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34
Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverRcvPwrLoAlarm		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35
Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverRcvPwrHiWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36
Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverRcvPwrLoWarn		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37
Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverErrors		1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38
Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
Status: current	Access: read-only
OBJECT-TYPE
	BITS	xcvrIOError(0), xcvrChecksum(1), xcvrTypeAndPortConfigMismatch(2), xcvrTypeNotSupported(3), wisLocalFault(4), rcvOpticalPowerFault(5), pmapmdReceiverLocalFault(6), pcsReceiveLocalFault(7), phyXSReceiveLocalFault(8), laserBiasCurrentFault(9), laserTemperatureFault(10), laserOutputPowerFault(11), txFault(12), pmapmdTransmitterLocalFault(13), pcsTransmitLocalFault(14), phyXSTransmitLocalFault(15), rxLossOfSignal(16)

hpnicfTransceiverChannelTable		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2
This table provides statistics about transceiver with multi-channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfTransceiverChannelEntry

hpnicfTransceiverChannelEntry		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1
The entry of the hpnicfTransceiverChannelTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfTransceiverChannelEntry

hpnicfTransceiverChannelIndex		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1
The channel index of transceiver. Indicating one channel of the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hpnicfTransceiverChannelCurTXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2
Indicating the current transmission power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverChannelCurRXPower		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3
Indicating the current received power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverChannelTemperature		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4
Indicating the current temperature. The unit is Celsius centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfTransceiverChannelBiasCurrent		1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5
Indicating the current bias electric current. The unit is in hundredths of mA.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32