HPN-ICF-TE-TUNNEL-MIB

File: HPN-ICF-TE-TUNNEL-MIB.mib (18203 bytes)

Imported modules

HPN-ICF-OID-MIB MPLS-TC-STD-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hpnicfCommon MplsTunnelIndex MplsTunnelInstanceIndex
MplsExtendedTunnelId MplsLabel OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP Unsigned32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
RowPointer

Defined Types

HpnicfTeTunnelStaticCrlspEntry  
SEQUENCE    
  hpnicfTeTunnelStaticCrlspInLabel MplsLabel
  hpnicfTeTunnelStaticCrlspName STRING
  hpnicfTeTunnelStaticCrlspStatus INTEGER
  hpnicfTeTunnelStaticCrlspRole INTEGER
  hpnicfTeTunnelStaticCrlspXCPointer RowPointer

HpnicfTeTunnelCoEntry  
SEQUENCE    
  hpnicfTeTunnelCoIndex MplsTunnelIndex
  hpnicfTeTunnelCoLspInstance MplsTunnelInstanceIndex
  hpnicfTeTunnelCoIngressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelCoEgressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelCoBiMode INTEGER
  hpnicfTeTunnelCoReverseLspInstance MplsTunnelInstanceIndex
  hpnicfTeTunnelCoReverseLspXCPointer RowPointer

HpnicfTeTunnelPsEntry  
SEQUENCE    
  hpnicfTeTunnelPsIndex MplsTunnelIndex
  hpnicfTeTunnelPsIngressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelPsEgressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelPsProtectIndex MplsTunnelIndex
  hpnicfTeTunnelPsProtectIngressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelPsProtectEgressLSRId MplsExtendedTunnelId
  hpnicfTeTunnelPsProtectType INTEGER
  hpnicfTeTunnelPsRevertiveMode INTEGER
  hpnicfTeTunnelPsWtrTime Unsigned32
  hpnicfTeTunnelPsHoldOffTime Unsigned32
  hpnicfTeTunnelPsSwitchMode INTEGER
  hpnicfTeTunnelPsWorkPathStatus INTEGER
  hpnicfTeTunnelPsProtectPathStatus INTEGER
  hpnicfTeTunnelPsSwitchResult INTEGER

Defined Values

hpnicfTeTunnel 1.3.6.1.4.1.11.2.14.11.15.2.115
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Te Tunnel.
MODULE-IDENTITY    

hpnicfTeTunnelScalars 1.3.6.1.4.1.11.2.14.11.15.2.115.1
OBJECT IDENTIFIER    

hpnicfTeTunnelMaxTunnelIndex 1.3.6.1.4.1.11.2.14.11.15.2.115.1.1
The max value of tunnel id is permitted configure on the device.
OBJECT-TYPE    
  MplsTunnelIndex  

hpnicfTeTunnelObjects 1.3.6.1.4.1.11.2.14.11.15.2.115.2
OBJECT IDENTIFIER    

hpnicfTeTunnelStaticCrlspTable 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1
This table contains information for static-crlsp, and through this to get detail information about this static-crlsp. Only support transit LSR and egress LSR.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTeTunnelStaticCrlspEntry

hpnicfTeTunnelStaticCrlspEntry 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1
The entry in this table describes static-crlsp information.
OBJECT-TYPE    
  HpnicfTeTunnelStaticCrlspEntry  

hpnicfTeTunnelStaticCrlspInLabel 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.1
This is unique label value that manualy assigned. Uniquely identifies a static-crlsp. Managers should use this to obtain detail static-crlsp information.
OBJECT-TYPE    
  MplsLabel  

hpnicfTeTunnelStaticCrlspName 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.2
The unique name assigned to the static-crlsp.
OBJECT-TYPE    
  STRING Size(1..15)  

hpnicfTeTunnelStaticCrlspStatus 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.3
Indicates the actual status of this static-crlsp, The value must be up when the static-crlsp status is up and the value must be down when the static-crlsp status is down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hpnicfTeTunnelStaticCrlspRole 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.4
This value indicate the role of this static-crlsp. This value must be transit at transit point of the tunnel, and tail at terminating point of the tunnel.
OBJECT-TYPE    
  INTEGER transit(1), tail(2)  

hpnicfTeTunnelStaticCrlspXCPointer 1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.5
This pointer unique identify a row of mplsXCTable. This value should be zeroDotZero when the static-crlsp is down. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other.
OBJECT-TYPE    
  RowPointer  

hpnicfTeTunnelCoTable 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2
This table contains information for Co-routed reverse crlsp and infomation of Co-routed bidirectional Tunnel Interface. If hpnicfCorouteTunnelLspInstance is zero, to obtain infomation of Co-routed bidirectional Tunnel Interface, otherwise to obtain Co-routed reverse crlsp infomation.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTeTunnelCoEntry

hpnicfTeTunnelCoEntry 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1
The entry in this table describes Co-routed infomation of bidirectional Tunnel Interface and reserver lsp information.
OBJECT-TYPE    
  HpnicfTeTunnelCoEntry  

hpnicfTeTunnelCoIndex 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs that specified at originating point. This value should be equal to the value signaled in the Tunnel Id of the Session object.
OBJECT-TYPE    
  MplsTunnelIndex  

hpnicfTeTunnelCoLspInstance 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.2
When obtain infomation of Co-routed bidirectional Tunnel Interface, this vlaue should be zero. And this value must be LspID to obtain reverse crlsp information. Values greater than 0, but less than or equal to 65535, should be useless.
OBJECT-TYPE    
  MplsTunnelInstanceIndex  

hpnicfTeTunnelCoIngressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.3
Identity the ingress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of originating endpoint.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelCoEgressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.4
Identity of the egress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of terminating point.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelCoBiMode 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.5
This vlaue indicated the bidirection mode of tunnel interface. The valuemust be coroutedActive at the originating point of the tunnel and coroutedPassive at the terminating point.
OBJECT-TYPE    
  INTEGER coroutedActive(1), coroutedPassive(2)  

hpnicfTeTunnelCoReverseLspInstance 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.6
This value indicated the reverse lsp instance, and should be equal to obverse lsp instance.
OBJECT-TYPE    
  MplsTunnelInstanceIndex  

hpnicfTeTunnelCoReverseLspXCPointer 1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.7
This pointer unique index to mplsXCTable of the reverse lsp. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of zeroDotZero indicate that there is no crlsp assigned to this.
OBJECT-TYPE    
  RowPointer  

hpnicfTeTunnelPsTable 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3
This table defines some objects for managers to obtain TE tunnel Protection Switching group current status information.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfTeTunnelPsEntry

hpnicfTeTunnelPsEntry 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1
The entry in this table describes TE tunnel Protection Switching group infromation.
OBJECT-TYPE    
  HpnicfTeTunnelPsEntry  

hpnicfTeTunnelPsIndex 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.1
Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of work tunnel instance.
OBJECT-TYPE    
  MplsTunnelIndex  

hpnicfTeTunnelPsIngressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.2
Identity the ingress LSR associated with work tunnel instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelPsEgressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.3
Identity of the egress LSR associated with work tunnel instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelPsProtectIndex 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.4
Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsTunnelIndex  

hpnicfTeTunnelPsProtectIngressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.5
Identity the ingress LSR associated with TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelPsProtectEgressLSRId 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.6
Identity of the egress LSR associated with TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hpnicfTeTunnelPsProtectType 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.7
This value indicated TE tunnel Protection Switching group type. The default value is oneToOne.
OBJECT-TYPE    
  INTEGER oneToOne(1), onePlusOne(2)  

hpnicfTeTunnelPsRevertiveMode 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.8
This value indicated protect switch mode. The value must be revertive or nonRevertive, default value is revertive.
OBJECT-TYPE    
  INTEGER revertive(1), noRevertive(2)  

hpnicfTeTunnelPsWtrTime 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.9
The cycle time that switch to protect tunnel.
OBJECT-TYPE    
  Unsigned32 0..60  

hpnicfTeTunnelPsHoldOffTime 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10
This value is switchback delay time. When detected the work path fault, switch to protect path after this time.
OBJECT-TYPE    
  Unsigned32 0..20  

hpnicfTeTunnelPsSwitchMode 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.11
This value indicated TE tunnel Protection Switching group switch mode.
OBJECT-TYPE    
  INTEGER uniDirectional(1), biDirectional(2)  

hpnicfTeTunnelPsWorkPathStatus 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.12
This value indicates work path status. none, noDefect, inDefect will be used.
OBJECT-TYPE    
  INTEGER none(1), noDefect(2), inDefect(3)  

hpnicfTeTunnelPsProtectPathStatus 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.13
This value indicates protect path status. none, noDefect, inDefect(3) will be used.
OBJECT-TYPE    
  INTEGER none(1), noDefect(2), inDefect(3)  

hpnicfTeTunnelPsSwitchResult 1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.14
This value indicated current using path is work path or protect path.
OBJECT-TYPE    
  INTEGER workPath(1), protectPath(2)  

hpnicfTeTunnelNotifications 1.3.6.1.4.1.11.2.14.11.15.2.115.3
OBJECT IDENTIFIER    

hpnicfTeTunnelNotificationsPrefix 1.3.6.1.4.1.11.2.14.11.15.2.115.3.0
OBJECT IDENTIFIER    

hpnicfTeTunnelPsSwitchWtoP 1.3.6.1.4.1.11.2.14.11.15.2.115.3.0.1
This notification is generated when protect workgroup switch from work tunnel to protect tunnel.
NOTIFICATION-TYPE    

hpnicfTeTunnelPsSwitchPtoW 1.3.6.1.4.1.11.2.14.11.15.2.115.3.0.2
This notification is generated when protect workgroup switch from protect tunnel to work tunnel.
NOTIFICATION-TYPE    

hpnicfTeTunnelConformance 1.3.6.1.4.1.11.2.14.11.15.2.115.4
OBJECT IDENTIFIER    

hpnicfTeTunnelCompliances 1.3.6.1.4.1.11.2.14.11.15.2.115.4.1
OBJECT IDENTIFIER    

hpnicfTeTunnelCompliance 1.3.6.1.4.1.11.2.14.11.15.2.115.4.1.1
The compliance statement for SNMP.
MODULE-COMPLIANCE    

hpnicfTeTunnelGroups 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2
OBJECT IDENTIFIER    

hpnicfTeTunnelNotificationsGroup 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.1
This group contains MPLS Te Tunnel traps.
NOTIFICATION-GROUP    

hpnicfTeTunnelScalarsGroup 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.2
Scalar object needed to implement MPLS te tunnels.
OBJECT-GROUP    

hpnicfTeTunnelStaticCrlspGroup 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.3
Objects for quering static-crlsp information.
OBJECT-GROUP    

hpnicfTeTunnelCorouteGroup 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.4
Objects for quering Co-routed reverse crlsp information.
OBJECT-GROUP    

hpnicfTeTunnelPsGroup 1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.5
Objects for quering protect workgroup information.
OBJECT-GROUP