HPN-ICF-SNA-DLSW-EXT-MIB

File: HPN-ICF-SNA-DLSW-EXT-MIB.mib (45439 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
INET-ADDRESS-MIB DLSW-MIB HPN-ICF-OID-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE TimeTicks
Integer32 Counter32 RowStatus
ifIndex InetAddress InetAddressType
dlswTConnConfigEntry dlswTConnOperEntry dlswTConnTcpConfigEntry
MacAddressNC LFSize TAddress
hpnicfCommon

Defined Types

HpnicfdeTConnConfigEntry  
SEQUENCE    
  hpnicfdeTConnConfigVersion OCTET STRING
  hpnicfdeTConnConfigPriority Integer32
  hpnicfdeTConnConfigLfSize LFSize
  hpnicfdeTConnConfigKeepaliveIntval Integer32
  hpnicfdeTConnConfigBackup INTEGER
  hpnicfdeTConnConfigBackupTAddr TAddress
  hpnicfdeTConnConfigBackupLinger Integer32

HpnicfdeTConnOperEntry  
SEQUENCE    
  hpnicfdeTConnOperPeerType INTEGER
  hpnicfdeTConnOperVendorID OCTET STRING
  hpnicfdeTConnOperVersionString OCTET STRING
  hpnicfdeTConnOperUpTime TimeTicks
  hpnicfdeTConnOperMulticastAddress TAddress
  hpnicfdeTConnOperStCapTcpNumber Integer32
  hpnicfdeTConnOperRecvPkts Counter32
  hpnicfdeTConnOperSendPkts Counter32
  hpnicfdeTConnOperDropPkts Counter32

HpnicfdeTConnTcpConfigEntry  
SEQUENCE    
  hpnicfdeTConnTcpConfigQueueMax Integer32

HpnicfdeBridgeEntry  
SEQUENCE    
  hpnicfdeBridgeNumIndex Integer32
  hpnicfdeBridgeRowStatus RowStatus

HpnicfdeBridgeIfEntry  
SEQUENCE    
  hpnicfdeBridgeIfBrgGrp Integer32
  hpnicfdeBridgeIfRowStatus RowStatus

HpnicfdeQllcEntry  
SEQUENCE    
  hpnicfQllcX121Address Integer32
  hpnicfQllcLocalMac MacAddressNC
  hpnicfQllcLocalSap OCTET STRING
  hpnicfQllcRemoteMac MacAddressNC
  hpnicfQllcRemoteSap OCTET STRING
  hpnicfQllcRowStatus RowStatus

HpnicfdeSdlcPortEntry  
SEQUENCE    
  hpnicfdeSdlcPortRole INTEGER
  hpnicfdeSdlcPortSendWindow Integer32
  hpnicfdeSdlcPortModulo INTEGER
  hpnicfdeSdlcPortMaxPdu Integer32
  hpnicfdeSdlcPortMaxSendQueue Integer32
  hpnicfdeSdlcPortMaxTransmission Integer32
  hpnicfdeSdlcPortSimultaneousEnable INTEGER
  hpnicfdeSdlcPortTimerACK Integer32
  hpnicfdeSdlcPortTimerLifeTime Integer32
  hpnicfdeSdlcPortTimerPollPause Integer32
  hpnicfdeSdlcPortRowStatus RowStatus

HpnicfdeLlc2PortEntry  
SEQUENCE    
  hpnicfdeLlc2PortMaxAck Integer32
  hpnicfdeLlc2PortMaxPdu Integer32
  hpnicfdeLlc2PortMaxSendQueue Integer32
  hpnicfdeLlc2PortMaxTransmission Integer32
  hpnicfdeLlc2PortModulo INTEGER
  hpnicfdeLlc2PortReceiveWindow Integer32
  hpnicfdeLlc2PortTimerAck Integer32
  hpnicfdeLlc2PortTimerAckDelay Integer32
  hpnicfdeLlc2PortTimerDetect Integer32
  hpnicfdeLlc2PortTimerBusy Integer32
  hpnicfdeLlc2PortTimerPoll Integer32
  hpnicfdeLlc2PortTimerReject Integer32
  hpnicfdeLlc2PortRowStatus RowStatus

HpnicfdeRchCacheEntry  
SEQUENCE    
  hpnicfdeRchCacheIndex Integer32
  hpnicfdeRchCacheStatus INTEGER
  hpnicfdeRchCacheRemainTime TimeTicks
  hpnicfdeRchCacheMac MacAddressNC
  hpnicfdeRchCacheRemoteIpAddrType InetAddressType
  hpnicfdeRchCacheRemoteIp InetAddress
  hpnicfdeRchCacheRowStatus RowStatus

HpnicfdeEBIfEntry  
SEQUENCE    
  hpnicfdeEBMulticastMac MacAddressNC
  hpnicfdeEBPriority Integer32
  hpnicfdeEBtimer Integer32
  hpnicfdeEBRowStatus RowStatus

HpnicfdeEBMacMapEntry  
SEQUENCE    
  hpnicfdeEBMacMapIndex Integer32
  hpnicfdeEBMacMapLocalMac MacAddressNC
  hpnicfdeEBMacMapRemoteMac MacAddressNC
  hpnicfdeEBMacMapNeighbour MacAddressNC
  hpnicfdeEBMacMapRowStatus RowStatus

Defined Values

hpnicfDlswExt 1.3.6.1.4.1.11.2.14.11.15.2.62
The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.
MODULE-IDENTITY    

hpnicfDlswExtMIBObjects 1.3.6.1.4.1.11.2.14.11.15.2.62.1
OBJECT IDENTIFIER    

hpnicfdeNode 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1
OBJECT IDENTIFIER    

hpnicfdeTConn 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2
OBJECT IDENTIFIER    

hpnicfdeBridge 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3
OBJECT IDENTIFIER    

hpnicfdeQllc 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4
OBJECT IDENTIFIER    

hpnicfdeSdlc 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5
OBJECT IDENTIFIER    

hpnicfdeLlc2 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6
OBJECT IDENTIFIER    

hpnicfdeReachableCache 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7
OBJECT IDENTIFIER    

hpnicfdeEthernetBackup 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8
OBJECT IDENTIFIER    

hpnicfdeNodeVendorID 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
OBJECT-TYPE    
  OCTET STRING Size(3)  

hpnicfdeNodeIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2
The type of ip address: IPv4 or IPv6.
OBJECT-TYPE    
  InetAddressType  

hpnicfdeNodeLocalAddr 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
OBJECT-TYPE    
  InetAddress  

hpnicfdeNodePriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
OBJECT-TYPE    
  Integer32 1..5 | 65535  

hpnicfdeNodeInitPacingWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
OBJECT-TYPE    
  Integer32 1..2000 | 65535  

hpnicfdeNodeMaxPacingWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
OBJECT-TYPE    
  Integer32 1..2000 | 65535  

hpnicfdeNodeKeepAliveInterval 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
OBJECT-TYPE    
  Integer32 0..2000 | 65535  

hpnicfdeNodePermitDynamic 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8
To accept connections from non-configured remote peer when permitDynamic is specified.
OBJECT-TYPE    
  INTEGER permitDynamic(1), forbidDynamic(2), unknown(65535)  

hpnicfdeNodeConnTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9
Define connected state timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeLocalPendTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10
Define connected state timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeRemotePendTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11
Define connected state timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeSnaCacheTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12
Define connected state timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeExplorerTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13
Define explorer timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeExplorerWaitTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14
Define explorer waiting timer.
OBJECT-TYPE    
  Integer32 1..65535  

hpnicfdeNodeConfigSapList 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15
The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
OBJECT-TYPE    
  OCTET STRING Size(16)  

hpnicfdeNodeMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16
The maximum retry times for TCP packet. Default value is 5.
OBJECT-TYPE    
  Integer32 1..10  

hpnicfdeNodeMulticastStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17
Multicast support status. It is disabled by default.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpnicfdeNodeMulticastAddress 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18
Multicast address. Default is 224.0.10.0. When the hpnicfdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
OBJECT-TYPE    
  InetAddress  

hpnicfdeNodeResetTcpAll 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19
Reset all TCP circuit switch. Any return value is meaningless.
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfdeNodeStCapTcpNum 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20
Tcp number reported in DLSw Capabilities Exchange.
OBJECT-TYPE    
  Integer32 0..255  

hpnicfdeNodeTcpQueueMax 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21
The max length of TCP queue.
OBJECT-TYPE    
  Integer32  

hpnicfdeTConnConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1
This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeTConnConfigEntry

hpnicfdeTConnConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1
A list of objects that define specific configuration for a DLSw peer transport connection.
OBJECT-TYPE    
  HpnicfdeTConnConfigEntry  

hpnicfdeTConnConfigVersion 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hpnicfdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hpnicfdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
OBJECT-TYPE    
  OCTET STRING Size(2)  

hpnicfdeTConnConfigPriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2
The priority for remote peer.
OBJECT-TYPE    
  Integer32 1..5  

hpnicfdeTConnConfigLfSize 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3
The largest frame size.
OBJECT-TYPE    
  LFSize  

hpnicfdeTConnConfigKeepaliveIntval 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4
The keepalive interval value.
OBJECT-TYPE    
  Integer32 1..1200  

hpnicfdeTConnConfigBackup 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5
The current remote peer is configured as the backup of another configured remote peer.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hpnicfdeTConnConfigBackupTAddr 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6
It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
OBJECT-TYPE    
  TAddress  

hpnicfdeTConnConfigBackupLinger 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7
Backup peer linger.
OBJECT-TYPE    
  Integer32 0..1440  

hpnicfdeTConnOperTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2
A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeTConnOperEntry

hpnicfdeTConnOperEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1
A list of objects that contain spefific operational information for a DLSw peer transport connection.
OBJECT-TYPE    
  HpnicfdeTConnOperEntry  

hpnicfdeTConnOperPeerType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1
The current remote peer is configured when the value is 'configured'.
OBJECT-TYPE    
  INTEGER configured(1), learningDynamic(2), other(3)  

hpnicfdeTConnOperVendorID 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
OBJECT-TYPE    
  OCTET STRING  

hpnicfdeTConnOperVersionString 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3
Version information of remote peer. The length up to 512 bytes.
OBJECT-TYPE    
  OCTET STRING  

hpnicfdeTConnOperUpTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4
The amount of time (in seconds) since this transport connection last entered the 'connected' state.
OBJECT-TYPE    
  TimeTicks  

hpnicfdeTConnOperMulticastAddress 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5
When remote peer supports DLSw2.0, this node identifies its multicast address.
OBJECT-TYPE    
  TAddress  

hpnicfdeTConnOperStCapTcpNumber 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6
Number of tcp supported when capabilities exchanging.
OBJECT-TYPE    
  Integer32  

hpnicfdeTConnOperRecvPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hpnicfdeTConnOperSendPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8
The number of SSP messages sent on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hpnicfdeTConnOperDropPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9
The number of SSP messages dropped on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hpnicfdeTConnTcpConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3
This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeTConnTcpConfigEntry

hpnicfdeTConnTcpConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1
A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
OBJECT-TYPE    
  HpnicfdeTConnTcpConfigEntry  

hpnicfdeTConnTcpConfigQueueMax 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1
Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
OBJECT-TYPE    
  Integer32 50..2000  

hpnicfdeBridgeTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1
A list of bridge group which is serving for DLSw.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeBridgeEntry

hpnicfdeBridgeEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1
A list of bridge information.
OBJECT-TYPE    
  HpnicfdeBridgeEntry  

hpnicfdeBridgeNumIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1
This value identifies the bridge number.
OBJECT-TYPE    
  Integer32 1..255  

hpnicfdeBridgeRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeBridgeIfTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2
The list of interface on which DLSw is active.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeBridgeIfEntry

hpnicfdeBridgeIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1
The list of bridge interface information.
OBJECT-TYPE    
  HpnicfdeBridgeIfEntry  

hpnicfdeBridgeIfBrgGrp 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1
This value identifies the bridge number attached to the interface.
OBJECT-TYPE    
  Integer32 1..255  

hpnicfdeBridgeIfRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeQllcTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1
The table defines attributes related for those QLLC that participate in data link switching.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeQllcEntry

hpnicfdeQllcEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1
The ifIndex belongs to the interface which link protocol is x.25.
OBJECT-TYPE    
  HpnicfdeQllcEntry  

hpnicfQllcX121Address 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1
X.121 address.
OBJECT-TYPE    
  Integer32  

hpnicfQllcLocalMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2
The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
OBJECT-TYPE    
  MacAddressNC  

hpnicfQllcLocalSap 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3
The SAP used to represent this link station.
OBJECT-TYPE    
  OCTET STRING Size(1)  

hpnicfQllcRemoteMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
OBJECT-TYPE    
  MacAddressNC  

hpnicfQllcRemoteSap 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5
The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
OBJECT-TYPE    
  OCTET STRING Size(01)  

hpnicfQllcRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeSdlcPortTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1
The table defines parameters for the interfaces whose link protocol is SDLC.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeSdlcPortEntry

hpnicfdeSdlcPortEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1
Sdlc port entry.
OBJECT-TYPE    
  HpnicfdeSdlcPortEntry  

hpnicfdeSdlcPortRole 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1
The SDLC role of interface.
OBJECT-TYPE    
  INTEGER primary(1), seconday(2), norole(3)  

hpnicfdeSdlcPortSendWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2
Size of local send window.
OBJECT-TYPE    
  Integer32 1..7  

hpnicfdeSdlcPortModulo 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3
Size of modulus.
OBJECT-TYPE    
  INTEGER m8(8), m128(128)  

hpnicfdeSdlcPortMaxPdu 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4
Maximum bytes for incoming frames.
OBJECT-TYPE    
  Integer32 1..17600  

hpnicfdeSdlcPortMaxSendQueue 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5
Size of hold queue.
OBJECT-TYPE    
  Integer32 20..255  

hpnicfdeSdlcPortMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6
Number of times to retry an operation.
OBJECT-TYPE    
  Integer32 1..255  

hpnicfdeSdlcPortSimultaneousEnable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7
Activate SDLC two-way simultaneous mode.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpnicfdeSdlcPortTimerACK 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8
Time to wait for a reply to a frame.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeSdlcPortTimerLifeTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9
Time to wait for a reply used by secondary station.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeSdlcPortTimerPollPause 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10
Time between polls for each secondary SDLC station.
OBJECT-TYPE    
  Integer32 1..10000  

hpnicfdeSdlcPortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeLlc2PortTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1
This table defines parameters for the Ethernet interface.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeLlc2PortEntry

hpnicfdeLlc2PortEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1
LLC2 port entry.
OBJECT-TYPE    
  HpnicfdeLlc2PortEntry  

hpnicfdeLlc2PortMaxAck 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1
Maximum of I-frames received before ACK.
OBJECT-TYPE    
  Integer32 1..127  

hpnicfdeLlc2PortMaxPdu 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2
Maximum of LLC2 pdu length.
OBJECT-TYPE    
  Integer32 1..1700  

hpnicfdeLlc2PortMaxSendQueue 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3
Queue for sending llc2 I-frames.
OBJECT-TYPE    
  Integer32 20..200  

hpnicfdeLlc2PortMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4
Retry times of operations.
OBJECT-TYPE    
  Integer32 1..255  

hpnicfdeLlc2PortModulo 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5
Modulus of LLC2.
OBJECT-TYPE    
  INTEGER m8(8), m128(128)  

hpnicfdeLlc2PortReceiveWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6
Maximum number of I-frames to send before received ACK.
OBJECT-TYPE    
  Integer32 1..127  

hpnicfdeLlc2PortTimerAck 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7
Waiting for ACK time after sending an I-frame.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortTimerAckDelay 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8
Maximum time allows I-frames incoming without replay ACK.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortTimerDetect 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9
Detect the link status.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortTimerBusy 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10
Waiting time while other LLC2 station is in busy state.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortTimerPoll 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11
Waiting time after a P frame is sent.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortTimerReject 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12
Waiting time after a REJ frame is sent.
OBJECT-TYPE    
  Integer32 1..60000  

hpnicfdeLlc2PortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeRchCacheStat 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1
OBJECT IDENTIFIER    

hpnicfdeRchCacheMaxIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.1
Maximum of hpnicfdeRchCacheIndex.
OBJECT-TYPE    
  Integer32  

hpnicfdeRchCacheNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.2
The next value of hpnicfdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
OBJECT-TYPE    
  Integer32  

hpnicfdeRchCacheTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3
Reachable cache table.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeRchCacheEntry

hpnicfdeRchCacheEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1
Reachable cache entry.
OBJECT-TYPE    
  HpnicfdeRchCacheEntry  

hpnicfdeRchCacheIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1
Index of reachable cache entry.
OBJECT-TYPE    
  Integer32  

hpnicfdeRchCacheStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2
Current status of reachable cache entry.
OBJECT-TYPE    
  INTEGER found(1), verify(2), noCacheInfo(3), exploring(4), waiting(5)  

hpnicfdeRchCacheRemainTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3
Remain time of reachable cache entry.
OBJECT-TYPE    
  TimeTicks  

hpnicfdeRchCacheMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4
MAC address of reachable cache entry.
OBJECT-TYPE    
  MacAddressNC  

hpnicfdeRchCacheRemoteIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5
Remote peer ip address type.
OBJECT-TYPE    
  InetAddressType  

hpnicfdeRchCacheRemoteIp 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6
Remote peer ip address of reachable cache entry.
OBJECT-TYPE    
  InetAddress  

hpnicfdeRchCacheRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeEBMacMapStat 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1
OBJECT IDENTIFIER    

hpnicfdeEBMacMapMaxIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.1
Maximum of hpnicfdeEBMacMapIndex.
OBJECT-TYPE    
  Integer32  

hpnicfdeEBMacMapNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.2
The next value of hpnicfdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
OBJECT-TYPE    
  Integer32  

hpnicfdeEBIfTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3
Information of interface which works for DLSw Ethernet redundancy.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeEBIfEntry

hpnicfdeEBIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1
Parameters defined for DLSw Ethernet redundancy interface.
OBJECT-TYPE    
  HpnicfdeEBIfEntry  

hpnicfdeEBMulticastMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1
Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
OBJECT-TYPE    
  MacAddressNC  

hpnicfdeEBPriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2
Priority configured for the Ethernet redundancy of DLSw module.
OBJECT-TYPE    
  Integer32 1..254  

hpnicfdeEBtimer 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3
Timer for the Ethernet redundancy of DLSw module.
OBJECT-TYPE    
  Integer32 100..5000  

hpnicfdeEBRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4
RowStatus.
OBJECT-TYPE    
  RowStatus  

hpnicfdeEBMacMapTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4
MAC address mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfdeEBMacMapEntry

hpnicfdeEBMacMapEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1
MAC address mapping entry.
OBJECT-TYPE    
  HpnicfdeEBMacMapEntry  

hpnicfdeEBMacMapIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1
Index of MAC address mapping entry.
OBJECT-TYPE    
  Integer32  

hpnicfdeEBMacMapLocalMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2
Local MAC address in MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
OBJECT-TYPE    
  MacAddressNC  

hpnicfdeEBMacMapRemoteMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3
Remote MAC address of MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
OBJECT-TYPE    
  MacAddressNC  

hpnicfdeEBMacMapNeighbour 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4
Neighbour of MAC address mapping.
OBJECT-TYPE    
  MacAddressNC  

hpnicfdeEBMacMapRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5
Status of MAC address mapping entry.
OBJECT-TYPE    
  RowStatus