HPN-ICF-MDC-MIB

File: HPN-ICF-MDC-MIB.mib (23297 bytes)

Imported modules

ENTITY-MIB HPN-ICF-OID-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

entPhysicalIndex hpnicfCommon Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE DisplayString RowStatus
TruthValue TEXTUAL-CONVENTION

Defined Types

HpnicfMdcActionValue  
TEXTUAL-CONVENTION    
  current INTEGER start(1), stop(2)

HpnicfMdcRunStatus  
TEXTUAL-CONVENTION    
  current INTEGER inactive(1), starting(2), active(3), stopping(4), updating(5)

HpnicfMDCControlEntry  
SEQUENCE    
  hpnicfMDCIndex Integer32
  hpnicfMDCName DisplayString
  hpnicfMDCAction HpnicfMdcActionValue
  hpnicfMDCStatus HpnicfMdcRunStatus
  hpnicfMDCRowStatus RowStatus

HpnicfMDCDISKResourceEntry  
SEQUENCE    
  hpnicfMDCDISKResourceInstance Integer32
  hpnicfMDCDISKResourceInstanceName DisplayString
  hpnicfMDCDISKResourceMinLimit Integer32
  hpnicfMDCDISKResourceMaxLimit Integer32
  hpnicfMDCDISKResourceReserve Unsigned32
  hpnicfMDCDISKResourceQuota Unsigned32
  hpnicfMDCDISKResourceUsage Unsigned32
  hpnicfMDCDISKResourceAvailable Unsigned32

HpnicfMDCMemoryResourceEntry  
SEQUENCE    
  hpnicfMDCMemoryResourceMinLimit Integer32
  hpnicfMDCMemoryResourceMaxLimit Integer32
  hpnicfMDCMemoryResourceReserve Unsigned32
  hpnicfMDCMemoryResourceQuota Unsigned32
  hpnicfMDCMemoryResourceUsage Unsigned32
  hpnicfMDCMemoryResourceAvailable Unsigned32

HpnicfMDCCPUResourceEntry  
SEQUENCE    
  hpnicfMDCCPUResourceLimit Integer32
  hpnicfMDCCPUResourceUsage Integer32

HpnicfMDCLocationEntry  
SEQUENCE    
  hpnicfMDCLocationStatus TruthValue

HpnicfMDCGroupIfEntry  
SEQUENCE    
  hpnicfMDCGroupIdentity Integer32

HpnicfMDCAllocateEntry  
SEQUENCE    
  hpnicfMDCAllocateGroupIndex Integer32
  hpnicfMDCAllocateGroupDescription DisplayString
  hpnicfMDCAllocateMDCId Integer32

Defined Values

hpnicfMDC 1.3.6.1.4.1.11.2.14.11.15.2.136
This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory space resources to the MDC, and display their status. 3. Authorize the MDC to use the interface cards, and assign physical interfaces to an MDC. Default MDC: A device supporting MDCs is an MDC itself, and it is called the default MDC. From the default MDC, administrators can manage the entire physical device, create and delete non-default MDCs, and assign interfaces, CPU resources, storage space, and memory space to non-default MDCs. Non-default MDC: No MDCs can be created on a non-default MDC. Administrators of non-default MDCs can only manage and maintain their respective MDCs. A non-default MDC can use only the resources assigned to it.
MODULE-IDENTITY    

hpnicfMDCScalarObjects 1.3.6.1.4.1.11.2.14.11.15.2.136.1
OBJECT IDENTIFIER    

hpnicfMDCMaxMDCNum 1.3.6.1.4.1.11.2.14.11.15.2.136.1.1
The maximum number of MDCs which the system supported to create.
OBJECT-TYPE    
  Integer32  

hpnicfMDCCurrentMDCNum 1.3.6.1.4.1.11.2.14.11.15.2.136.1.2
The current number of MDCs which the system has created.
OBJECT-TYPE    
  Integer32  

hpnicfMDCTables 1.3.6.1.4.1.11.2.14.11.15.2.136.2
OBJECT IDENTIFIER    

hpnicfMDCControl 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1
OBJECT IDENTIFIER    

hpnicfMDCControlTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1
This table is used to configure MDCs for a device and show MDC's status.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCControlEntry

hpnicfMDCControlEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1
An entry of the hpnicfMDCControlTable, every entry is corresponding with an MDC.
OBJECT-TYPE    
  HpnicfMDCControlEntry  

hpnicfMDCIndex 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.1
MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model. MDCIndex cannot be modified after creation.
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfMDCName 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.2
Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC name cannot be modified after creation.
OBJECT-TYPE    
  DisplayString Size(1..15)  

hpnicfMDCAction 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.3
State of MDC action: start/stop. After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and maintenance. Stopping an MDC interrupts all services on the MDC and logs out all users of the MDC. Non-default MDC cannot operate.
OBJECT-TYPE    
  HpnicfMdcActionValue  

hpnicfMDCStatus 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.4
Status of MDCs.
OBJECT-TYPE    
  HpnicfMdcRunStatus  

hpnicfMDCRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.5
The status of this table entry. Only support active, createAndGo and destroy.
OBJECT-TYPE    
  RowStatus  

hpnicfMDCResource 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2
OBJECT IDENTIFIER    

hpnicfMDCDISKResourceTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1
This table is for disk resource management: Specify a disk space percentage for an MDC and display the disk space usage. Default: All MDCs share the disk space in the system, and an MDC can use all free disk space in the system. Non-default MDC can only query the disk space usage.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCDISKResourceEntry

hpnicfMDCDISKResourceEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1
An entry of the hpnicfMDCDISKResourceTable, every entry is corresponding to disk resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  HpnicfMDCDISKResourceEntry  

hpnicfMDCDISKResourceInstance 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.1
Instance index of disk resource. Different instances for disk: Flash, CF cards.
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfMDCDISKResourceInstanceName 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.2
Instance name of disk resource. Such as: Flash, CF cards.
OBJECT-TYPE    
  DisplayString Size(1..32)  

hpnicfMDCDISKResourceMinLimit 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.3
Limit minimum (reserve resources, must be all 0).
OBJECT-TYPE    
  Integer32 0..100  

hpnicfMDCDISKResourceMaxLimit 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.4
Maximum of available resources of disk. Make sure the disk space amount assigned to an MDC is greater than the disk space amount the MDC is using. Non-default MDC cannot set
OBJECT-TYPE    
  Integer32 1..100  

hpnicfMDCDISKResourceReserve 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.5
The reserve limit resources of disk.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCDISKResourceQuota 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.6
The total limit resources of disk according to hpnicfMDCDiskResourceMaxLimit.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCDISKResourceUsage 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.7
Current usage of disk resources.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCDISKResourceAvailable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.8
Current available resources of disk.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCMemoryResourceTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2
This table is for memory resource management: Specify a memory space percentage for an MDC and display the memory space usage. Default: All MDCs share the memory space in the system, and an MDC can use all free memory. Non-default MDC can only query resource message of memory.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCMemoryResourceEntry

hpnicfMDCMemoryResourceEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1
An entry of the hpnicfMDCMemoryResourceTable, every entry is corresponding with memory resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  HpnicfMDCMemoryResourceEntry  

hpnicfMDCMemoryResourceMinLimit 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.1
Limit minimum(reserve resources, must be all 0). Non-default MDC cannot set.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfMDCMemoryResourceMaxLimit 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.2
Maximum of available resources of memory, it specifies the ratio of the memory space that an MDC can use. Make sure this amount is sufficient for the MDC to operate properly. Non-default MDC cannot set.
OBJECT-TYPE    
  Integer32 1..100  

hpnicfMDCMemoryResourceReserve 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.3
The reserve limit resources of memory.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCMemoryResourceQuota 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.4
The total limit resources of memory.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCMemoryResourceUsage 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.5
Current usage of memory resources.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCMemoryResourceAvailable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.6
Current available value of memory resources.
OBJECT-TYPE    
  Unsigned32  

hpnicfMDCCPUResourceTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3
This table is for CPU resource management: Specify a CPU weight for an MDC and display the CPU usage. The amount of CPU resources an MDC can use depends on the CPU weight settings for all MDCs that share the same CPU. Non-default MDC can only query CPU resources.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCCPUResourceEntry

hpnicfMDCCPUResourceEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1
An entry of the hpnicfMDCCPUResourceTable, every entry is corresponding with CPU resources of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  HpnicfMDCCPUResourceEntry  

hpnicfMDCCPUResourceLimit 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1.1
CPU weight-maximum of available resources of CPU, this number specifies a CPU weight for an MDC. Non-default MDC cannot set.
OBJECT-TYPE    
  Integer32 1..10  

hpnicfMDCCPUResourceUsage 1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1.2
the CPU usage
OBJECT-TYPE    
  Integer32 0..100  

hpnicfMDCLocation 1.3.6.1.4.1.11.2.14.11.15.2.136.2.3
OBJECT IDENTIFIER    

hpnicfMDCLocationTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1
This table is for location management: Authorize an MDC to use an interface card and query state of location. To assign physical interfaces to an MDC, administrators must authorize the MDC to use the interface cards to which the physical interfaces belong. Default: All interface cards of the device belong to the default MDC, and a non-default MDC cannot use any interface card. Non-default MDC can only query location state.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCLocationEntry

hpnicfMDCLocationEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1.1
An entry of the hpnicfMDCLocationTable, every entry is the status whether an MDC has been Authorized to use the interface cards. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  HpnicfMDCLocationEntry  

hpnicfMDCLocationStatus 1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1.1.1
To authorize the MDC to use the interface cards, set the value of this object to 'true (1)'. To cancel the authorization, set this value to 'false (2)'. Note that the return noError means the command is being executed. For the execution result, check hpnicfMDCLocationStatus.
OBJECT-TYPE    
  TruthValue  

hpnicfMDCAllocate 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4
OBJECT IDENTIFIER    

hpnicfMDCGroupIfTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1
This table indication of relation between interfaces and groups, which helps to realize the allocation, together with hpnicfMDCAllocateTable. Non-default MDC cannot operate.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCGroupIfEntry

hpnicfMDCGroupIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1.1
An entry of the hpnicfMDCGroupIfTable, every entry is the relationship between interfaces and groups. Due to hardware restrictions, the interfaces on some interface cards are grouped. The interfaces in a group must be assigned to the same MDC at the same time or removed from an MDC at the same time. Interface grouping depends on the device model. This table is used for hpnicfMDCAllocateTable to show interfae group lists. Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table.
OBJECT-TYPE    
  HpnicfMDCGroupIfEntry  

hpnicfMDCGroupIdentity 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1.1.2
The interface group ID. There are two parts for this id depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  Integer32  

hpnicfMDCAllocateTable 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2
This table is used to assigning a physical interface to an MDC. It is allowed that allocate interfaces to a non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. All physical interfaces on the device belong to the default MDC, and a non-default MDC has no physical interfaces to use. Multiple physical interfaces can be assigned to a non-default MDC. A physical interface must meet the following conditions to be assigned to a non-default MDC: 1. Belongs to the default MDC. 2. Not the console or AUX port. 3. Not the management Ethernet interface. 4. Not in an interface group with an interface assigned to another MDC. 5. The default MDC uses only the physical interfaces that are not assigned to a non-default MDC. Non-default MDC cannot set this table.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfMDCAllocateEntry

hpnicfMDCAllocateEntry 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1
An entry of the hpnicfMDCAllocateTable, every entry is the status whether physical interfaces have been assigned to an MDC.
OBJECT-TYPE    
  HpnicfMDCAllocateEntry  

hpnicfMDCAllocateGroupIndex 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.1
The interface group ID, the same as hpnicfMDCGroupIdentity. There are two parts for this id. depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfMDCAllocateGroupDescription 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.2
Interfaces list Such as: GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24, GigabitEthernet4/5/0/48
OBJECT-TYPE    
  DisplayString Size(1..255)  

hpnicfMDCAllocateMDCId 1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.3
MDC ID is used as hpnicfMDCAllocateMDCId. Default MDC: It is allowed that allocate interfaces to non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. Non-default MDC cannot set allocation, can only query grouping of own MDC.
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfMDCNotification 1.3.6.1.4.1.11.2.14.11.15.2.136.3
OBJECT IDENTIFIER    

hpnicfMDCNotificationObjects 1.3.6.1.4.1.11.2.14.11.15.2.136.3.0
OBJECT IDENTIFIER    

hpnicfMDCStateChangeToActive 1.3.6.1.4.1.11.2.14.11.15.2.136.3.0.1
The hpnicfMDCStateChangeToActive trap indicates that the MDC status has changed to active.
NOTIFICATION-TYPE    

hpnicfMDCStateChangeToInactive 1.3.6.1.4.1.11.2.14.11.15.2.136.3.0.2
The hpnicfMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive.
NOTIFICATION-TYPE