HPN-ICF-LswMSTP-MIB

File: HPN-ICF-LswMSTP-MIB.mib (32663 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	BRIDGE-MIB
HPN-ICF-OID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Counter32	OBJECT-IDENTITY	NOTIFICATION-TYPE
TEXTUAL-CONVENTION	TruthValue	dot1dStpPortEntry
dot1dStpPort	hpnicflswCommon

Defined Types

EnabledStatus
A simple status value for the object.
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2)

BridgeId
OCTET STRING	Size(8)

Hpnicfdot1sFormatStatus
Legacy means that the BPDU format is legacy. Dot1s means that the BPDU format is IEEE 802.1s. Auto means that the format of BPDU sending on the port is determined by the BPDU format of its connective port.
TEXTUAL-CONVENTION
	INTEGER	legacy(1), dot1s(2), auto(3)

Hpnicfdot1sVIDAllocationEntry
SEQUENCE
	hpnicfdot1sMstVID	Integer32
	hpnicfdot1sAdminMstID	Integer32
	hpnicfdot1sOperMstID	Integer32

Hpnicfdot1sInstanceEntry
SEQUENCE
	hpnicfdot1sInstanceID	Integer32
	hpnicfdot1sMstiBridgeID	BridgeId
	hpnicfdot1sMstiBridgePriority	Integer32
	hpnicfdot1sMstiDesignedRoot	BridgeId
	hpnicfdot1sMstiRootPathCost	Integer32
	hpnicfdot1sMstiRootPort	Integer32
	hpnicfdot1sMstiRootType	INTEGER
	hpnicfdot1sMstiRemainingHops	Integer32
	hpnicfdot1sMstiAdminMappedVlanListLow	OCTET STRING
	hpnicfdot1sMstiAdminMappedVlanListHigh	OCTET STRING
	hpnicfdot1sMstiOperMappedVlanListLow	OCTET STRING
	hpnicfdot1sMstiOperMappedVlanListHigh	OCTET STRING

Hpnicfdot1sPortEntry
SEQUENCE
	hpnicfdot1sMstiPortIndex	Integer32
	hpnicfdot1sMstiState	INTEGER
	hpnicfdot1sMstiPortPriority	Integer32
	hpnicfdot1sMstiPathCost	Integer32
	hpnicfdot1sMstiDesignatedRoot	BridgeId
	hpnicfdot1sMstiDesignatedCost	Integer32
	hpnicfdot1sMstiDesignatedBridge	BridgeId
	hpnicfdot1sMstiDesignatedPort	OCTET STRING
	hpnicfdot1sMstiMasterBridgeID	BridgeId
	hpnicfdot1sMstiMasterPortCost	Integer32
	hpnicfdot1sMstiStpPortEdgeport	EnabledStatus
	hpnicfdot1sMstiStpPortPointToPoint	INTEGER
	hpnicfdot1sMstiStpMcheck	INTEGER
	hpnicfdot1sMstiStpTransLimit	Integer32
	hpnicfdot1sMstiStpRXStpBPDU	Counter32
	hpnicfdot1sMstiStpTXStpBPDU	Counter32
	hpnicfdot1sMstiStpRXTCNBPDU	Counter32
	hpnicfdot1sMstiStpTXTCNBPDU	Counter32
	hpnicfdot1sMstiStpRXRSTPBPDU	Counter32
	hpnicfdot1sMstiStpTXRSTPBPDU	Counter32
	hpnicfdot1sMstiStpRXMSTPBPDU	Counter32
	hpnicfdot1sMstiStpTXMSTPBPDU	Counter32
	hpnicfdot1sMstiStpClearStatistics	INTEGER
	hpnicfdot1sMstiStpDefaultPortCost	INTEGER
	hpnicfdot1sMstiStpStatus	EnabledStatus
	hpnicfdot1sMstiPortRootGuard	EnabledStatus
	hpnicfdot1sMstiPortLoopGuard	EnabledStatus
	hpnicfdot1sMstiStpPortSendingBPDUType	INTEGER
	hpnicfdot1sMstiStpOperPortPointToPoint	INTEGER
	hpnicfdot1sMstiStpPortAdminBPDUFmt	Hpnicfdot1sFormatStatus
	hpnicfdot1sMstiStpPortOperBPDUFmt	Hpnicfdot1sFormatStatus
	hpnicfdot1sMstiStpPortRoleRestriction	EnabledStatus
	hpnicfdot1sMstiStpPortTcRestriction	EnabledStatus
	hpnicfdot1sMstiStpPortDisputed	TruthValue

Defined Values

hpnicfdot1sMstp		1.3.6.1.4.1.11.2.14.11.15.8.35.14
This MIB defines objects for managing MSTP.
MODULE-IDENTITY

hpnicfdot1sStpStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.14.1
Whether the Bridge MSTP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sStpForceVersion		1.3.6.1.4.1.11.2.14.11.15.8.35.14.2
The mode of this Bridge spanning-tree protocol.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stp(0), rstp(2), mstp(3)

hpnicfdot1sStpDiameter		1.3.6.1.4.1.11.2.14.11.15.8.35.14.3
The diameter of Bridge.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..7

hpnicfdot1sMstBridgeMaxHops		1.3.6.1.4.1.11.2.14.11.15.8.35.14.4
The maximum value of the Bridge hops.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..40

hpnicfdot1sMstMasterBridgeID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.5
The Bridge Identifier of the current Master Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstMasterPathCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.6
The CIST path cost from the transmitting Bridge to the Master Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstBpduGuard		1.3.6.1.4.1.11.2.14.11.15.8.35.14.7
Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstAdminFormatSelector		1.3.6.1.4.1.11.2.14.11.15.8.35.14.8
The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hpnicfdot1sMstAdminRegionName		1.3.6.1.4.1.11.2.14.11.15.8.35.14.9
This MSTP administrative region name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hpnicfdot1sMstAdminRevisionLevel		1.3.6.1.4.1.11.2.14.11.15.8.35.14.10
This MSTP administrative revision level.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

hpnicfdot1sMstOperFormatSelector		1.3.6.1.4.1.11.2.14.11.15.8.35.14.11
The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstOperRegionName		1.3.6.1.4.1.11.2.14.11.15.8.35.14.12
This MSTP operative region name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hpnicfdot1sMstOperRevisionLevel		1.3.6.1.4.1.11.2.14.11.15.8.35.14.13
This MSTP operative revision level.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfdot1sMstOperConfigDigest		1.3.6.1.4.1.11.2.14.11.15.8.35.14.14
This MSTP Region's Configuration Digest Signature Key.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hpnicfdot1sMstRegionConfActive		1.3.6.1.4.1.11.2.14.11.15.8.35.14.15
Active the region configuration.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hpnicfdot1sMstDefaultVlanAllo		1.3.6.1.4.1.11.2.14.11.15.8.35.14.16
Set default configuration about VLAN allocation and all VLANs are mapped to CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hpnicfdot1sMstDefaultRegionName		1.3.6.1.4.1.11.2.14.11.15.8.35.14.17
Set default region name.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hpnicfdot1sVIDAllocationTable		1.3.6.1.4.1.11.2.14.11.15.8.35.14.18
MSTP VLAN-to-instance mapping table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hpnicfdot1sVIDAllocationEntry

hpnicfdot1sVIDAllocationEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1
MSTP VLAN-to-instance mapping table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hpnicfdot1sVIDAllocationEntry

hpnicfdot1sMstVID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.1
VLAN Identifier
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

hpnicfdot1sAdminMstID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.2
Administrative Multiple spanning-tree instance Identifier.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..4094

hpnicfdot1sOperMstID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.3
Operative Multiple spanning-tree instance Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..4094

hpnicfdot1sInstanceTable		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19
MSTI table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hpnicfdot1sInstanceEntry

hpnicfdot1sInstanceEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1
MSTI table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hpnicfdot1sInstanceEntry

hpnicfdot1sInstanceID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.1
Multiple spanning-tree instance Identifier
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..4094

hpnicfdot1sMstiBridgeID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.2
The Bridge Identifier for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstiBridgePriority		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.3
The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..61440

hpnicfdot1sMstiDesignedRoot		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.4
The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstiRootPathCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.5
The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstiRootPort		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.6
The Root Port for the spanning tree instance identified by the MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstiRootType		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.7
Config this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTID
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), secondary(1), primary(2)

hpnicfdot1sMstiRemainingHops		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.8
The remaining hops of the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstiAdminMappedVlanListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.9
The lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfdot1sMstiAdminMappedVlanListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.10
The higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfdot1sMstiOperMappedVlanListLow		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.11
The lower part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfdot1sMstiOperMappedVlanListHigh		1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.12
The higher part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpnicfdot1sPortTable		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20
MSTP interface table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hpnicfdot1sPortEntry

hpnicfdot1sPortEntry		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1
MSTP interface table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hpnicfdot1sPortEntry

hpnicfdot1sMstiPortIndex		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.1
The index of the Bridge Port
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfdot1sMstiState		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.2
The current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), discarding(2), learning(4), forwarding(5)

hpnicfdot1sMstiPortPriority		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.3
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..240

hpnicfdot1sMstiPathCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.4
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..200000000

hpnicfdot1sMstiDesignatedRoot		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.5
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstiDesignatedCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.6
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstiDesignatedBridge		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.7
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstiDesignatedPort		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.8
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

hpnicfdot1sMstiMasterBridgeID		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.9
The Bridge Identifier of the current Master Bridge. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hpnicfdot1sMstiMasterPortCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.10
The CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfdot1sMstiStpPortEdgeport		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.11
Whether the port fast is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiStpPortPointToPoint		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.12
Whether the port connects the point to point link. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	forceTrue(1), forceFalse(2), auto(3)

hpnicfdot1sMstiStpMcheck		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.13
Forcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hpnicfdot1sMstiStpTransLimit		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.14
The value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hpnicfdot1sMstiStpRXStpBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.15
The number of received Config BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpTXStpBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.16
The number of transmitted Config BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpRXTCNBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.17
The number of received TCN BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpTXTCNBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.18
The number of transmitted TCN BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpRXRSTPBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.19
The number of received RST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpTXRSTPBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.20
The number of transmitted RST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpRXMSTPBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.21
The number of received MST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpTXMSTPBPDU		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.22
The number of transmitted MST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfdot1sMstiStpClearStatistics		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.23
Clear the spanning tree statistic. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1), unused(65535)

hpnicfdot1sMstiStpDefaultPortCost		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.24
Set default Port path cost.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hpnicfdot1sMstiStpStatus		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.25
Whether the spanning tree protocol is enabled on this port. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiPortRootGuard		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.26
Whether the root guard is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiPortLoopGuard		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.27
Whether the loop protection is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiStpPortSendingBPDUType		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.28
Type of BPDU which the port is sending.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stp(1), rstp(2), mstp(3)

hpnicfdot1sMstiStpOperPortPointToPoint		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29
This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hpnicfdot1sMstiStpPortPointToPoint. If the value of hpnicfdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

hpnicfdot1sMstiStpPortAdminBPDUFmt		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.30
The value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	Hpnicfdot1sFormatStatus

hpnicfdot1sMstiStpPortOperBPDUFmt		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.31
The format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Hpnicfdot1sFormatStatus

hpnicfdot1sMstiStpPortRoleRestriction		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.32
Whether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiStpPortTcRestriction		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.33
Whether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hpnicfdot1sMstiStpPortDisputed		1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.34
Whether the port is disputed for the CIST or MSTI.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hpnicfdot1sStpPathCostStandard		1.3.6.1.4.1.11.2.14.11.15.8.35.14.21
Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	legacy(0), dot1d-1998(1), dot1t(2)

hpnicfMstpEventsV2		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0
Definition point for Mstp notifications.
Status: current	Access: read-write
OBJECT-IDENTITY

hpnicfPortMstiStateForwarding		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.1
The SNMP trap that is generated when a port turns into forwarding state form other state.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfPortMstiStateDiscarding		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.2
The SNMP trap that is generated when a port turns into discarding state form forwarding state.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfBridgeLostRootPrimary		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.3
The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfPortMstiRootGuarded		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.4
The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfPortMstiBpduGuarded		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.5
The SNMP trap is generated when an edged port of the BPDU-guard device receives a BPDU. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfPortMstiLoopGuarded		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.6
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfMstiNewRoot		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.7
The SNMP trap is generated when the sending device becomes the new root of the spanning tree. The first root bridge ID means the old root bridge ID, and the second one means the new root bridge ID.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfPortPvstBpduProtection		1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.8
The SNMP trap is generated when a PVST BPDU is received on an MSTP port that is enabled with the PVST protection feature. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero.
Status: current	Access: read-write
NOTIFICATION-TYPE