HPN-ICF-EPON-MIB

File: HPN-ICF-EPON-MIB.mib (170515 bytes)

Imported modules

HPN-ICF-OID-MIB IF-MIB HPN-ICF-LSW-DEV-ADM-MIB
SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB

Imported symbols

hpnicfEpon ifIndex ifDescr
hpnicfLswFrameIndex hpnicfLswSlotIndex Integer32
Unsigned32 Counter64 IpAddress
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
TruthValue MacAddress DateAndTime
RowStatus DisplayString InetAddress
InetAddressType

Defined Types

HpnicfEponSysManEntry  
SEQUENCE    
  hpnicfEponSlotIndex Integer32
  hpnicfEponModeSwitch INTEGER
  hpnicfEponAutomaticMode INTEGER
  hpnicfEponOamDiscoveryTimeout Integer32
  hpnicfEponEncryptionNoReplyTimeOut Integer32
  hpnicfEponEncryptionUpdateTime Integer32
  hpnicfEponAutoBindStatus INTEGER

HpnicfEponAutoUpdateEntry  
SEQUENCE    
  hpnicfEponAutoUpdateFileName DisplayString
  hpnicfEponAutoUpdateSchedStatus INTEGER
  hpnicfEponAutoUpdateSchedTime OCTET STRING
  hpnicfEponAutoUpdateSchedType INTEGER
  hpnicfEponAutoUpdateRealTimeStatus INTEGER

HpnicfEponOuiIndexNextEntry  
SEQUENCE    
  hpnicfEponOuiIndexNext Integer32

HpnicfEponOuiEntry  
SEQUENCE    
  hpnicfEponOuiIndex Integer32
  hpnicfEponOuiValue OCTET STRING
  hpnicfEponOamVersion OCTET STRING
  hpnicfEponOuiRowStatus RowStatus

HpnicfEponMulticastControlEntry  
SEQUENCE    
  hpnicfEponMulticastVlanId Integer32
  hpnicfEponMulticastAddressList OCTET STRING
  hpnicfEponMulticastStatus RowStatus

HpnicfOltSysManEntry  
SEQUENCE    
  hpnicfOltLaserOnTime Integer32
  hpnicfOltLaserOffTime Integer32
  hpnicfOltMultiCopyBrdCast TruthValue
  hpnicfOltEnableDiscardPacket TruthValue
  hpnicfOltSelfTest INTEGER
  hpnicfOltSelfTestResult INTEGER
  hpnicfOltMaxRtt Unsigned32

HpnicfOltInfoEntry  
SEQUENCE    
  hpnicfOltFirmMajorVersion OCTET STRING
  hpnicfOltFirmMinorVersion OCTET STRING
  hpnicfOltHardMajorVersion OCTET STRING
  hpnicfOltHardMinorVersion OCTET STRING
  hpnicfOltAgcLockTime Integer32
  hpnicfOltAgcCdrTime Integer32
  hpnicfOltMacAddress MacAddress
  hpnicfOltWorkMode INTEGER
  hpnicfOltOpticalPowerTx Integer32
  hpnicfOltOpticalPowerRx Integer32

HpnicfOltDbaManEntry  
SEQUENCE    
  hpnicfOltDbaEnabledType INTEGER
  hpnicfOltDbaDiscoveryLength Integer32
  hpnicfOltDbaDiscovryFrequency Integer32
  hpnicfOltDbaCycleLength Integer32
  hpnicfOltDbaVersion OCTET STRING
  hpnicfOltDbaUpdate INTEGER
  hpnicfOltDbaUpdateResult INTEGER

HpnicfOltPortAlarmThresholdEntry  
SEQUENCE    
  hpnicfOltPortAlarmBerEnabled TruthValue
  hpnicfOltPortAlarmBerDirect INTEGER
  hpnicfOltPortAlarmBerThreshold Integer32
  hpnicfOltPortAlarmFerEnabled TruthValue
  hpnicfOltPortAlarmFerDirect INTEGER
  hpnicfOltPortAlarmFerThreshold Integer32
  hpnicfOltPortAlarmLlidMismatchEnabled TruthValue
  hpnicfOltPortAlarmLlidMismatchThreshold Integer32
  hpnicfOltPortAlarmRemoteStableEnabled TruthValue
  hpnicfOltPortAlarmLocalStableEnabled TruthValue
  hpnicfOltPortAlarmRegistrationEnabled TruthValue
  hpnicfOltPortAlarmOamDisconnectionEnabled TruthValue
  hpnicfOltPortAlarmEncryptionKeyEnabled TruthValue
  hpnicfOltPortAlarmVendorSpecificEnabled TruthValue
  hpnicfOltPortAlarmRegExcessEnabled TruthValue
  hpnicfOltPortAlarmDFEEnabled TruthValue

HpnicfOnuSilentEntry  
SEQUENCE    
  hpnicfOnuSilentMacAddr MacAddress
  hpnicfOnuSilentTime Integer32

HpnicfOltUsingOnuEntry  
SEQUENCE    
  hpnicfOltUsingOnuNum Integer32
  hpnicfOltUsingOnuIfIndex Integer32
  hpnicfOltUsingOnuRowStatus RowStatus

HpnicfOnuSysManEntry  
SEQUENCE    
  hpnicfOnuEncryptMan INTEGER
  hpnicfOnuReAuthorize INTEGER
  hpnicfOnuMulticastFilterStatus TruthValue
  hpnicfOnuDbaReportQueueSetNumber Integer32
  hpnicfOnuRemoteFecStatus INTEGER
  hpnicfOnuPortBerStatus INTEGER
  hpnicfOnuReset INTEGER
  hpnicfOnuMulticastControlMode INTEGER
  hpnicfOnuAccessVlan Integer32
  hpnicfOnuEncryptKey DisplayString
  hpnicfOnuUniUpDownTrapStatus TruthValue
  hpnicfOnuFecStatus INTEGER
  hpnicfOnuMcastCtrlHostAgingTime Integer32
  hpnicfOnuMulticastFastLeaveEnable TruthValue
  hpnicfOnuPortIsolateEnable TruthValue

HpnicfOnuLinkTestEntry  
SEQUENCE    
  hpnicfOnuLinkTestFrameNum Integer32
  hpnicfOnuLinkTestFrameSize Integer32
  hpnicfOnuLinkTestDelay TruthValue
  hpnicfOnuLinkTestVlanTag TruthValue
  hpnicfOnuLinkTestVlanPriority Integer32
  hpnicfOnuLinkTestVlanTagID Integer32
  hpnicfOnuLinkTestResultSentFrameNum Integer32
  hpnicfOnuLinkTestResultRetFrameNum Integer32
  hpnicfOnuLinkTestResultRetErrFrameNum Integer32
  hpnicfOnuLinkTestResultMinDelay Integer32
  hpnicfOnuLinkTestResultMeanDelay Integer32
  hpnicfOnuLinkTestResultMaxDelay Integer32

HpnicfOnuBandWidthEntry  
SEQUENCE    
  hpnicfOnuDownStreamBandWidthPolicy TruthValue
  hpnicfOnuDownStreamMaxBandWidth Integer32
  hpnicfOnuDownStreamMaxBurstSize Integer32
  hpnicfOnuDownStreamHighPriorityFirst TruthValue
  hpnicfOnuDownStreamShortFrameFirst TruthValue
  hpnicfOnuP2PBandWidthPolicy TruthValue
  hpnicfOnuP2PMaxBandWidth Integer32
  hpnicfOnuP2PMaxBurstSize Integer32
  hpnicfOnuP2PHighPriorityFirst TruthValue
  hpnicfOnuP2PShortFrameFirst TruthValue

HpnicfOnuSlaManEntry  
SEQUENCE    
  hpnicfOnuSlaMaxBandWidth Integer32
  hpnicfOnuSlaMinBandWidth Integer32
  hpnicfOnuSlaBandWidthStepVal Integer32
  hpnicfOnuSlaDelay INTEGER
  hpnicfOnuSlaFixedBandWidth Integer32
  hpnicfOnuSlaPriorityClass Integer32
  hpnicfOnuSlaFixedPacketSize Integer32

HpnicfOnuInfoEntry  
SEQUENCE    
  hpnicfOnuHardMajorVersion OCTET STRING
  hpnicfOnuHardMinorVersion OCTET STRING
  hpnicfOnuSoftwareVersion OCTET STRING
  hpnicfOnuUniMacType INTEGER
  hpnicfOnuLaserOnTime Integer32
  hpnicfOnuLaserOffTime Integer32
  hpnicfOnuGrantFifoDep Integer32
  hpnicfOnuWorkMode INTEGER
  hpnicfOnuPCBVersion OCTET STRING
  hpnicfOnuRtt Unsigned32
  hpnicfOnuEEPROMVersion OCTET STRING
  hpnicfOnuRegType OCTET STRING
  hpnicfOnuHostType OCTET STRING
  hpnicfOnuDistance Integer32
  hpnicfOnuLlid Integer32
  hpnicfOnuVendorId OCTET STRING
  hpnicfOnuFirmwareVersion OCTET STRING
  hpnicfOnuOpticalPowerReceivedByOlt Integer32

HpnicfOnuMacAddrInfoEntry  
SEQUENCE    
  hpnicfOnuMacIndex Integer32
  hpnicfOnuMacAddrFlag INTEGER
  hpnicfOnuMacAddress MacAddress

HpnicfOnuBindMacAddrEntry  
SEQUENCE    
  hpnicfOnuBindMacAddress MacAddress
  hpnicfOnuBindType Integer32

HpnicfOnuFirmwareUpdateEntry  
SEQUENCE    
  hpnicfOnuUpdate INTEGER
  hpnicfOnuUpdateResult INTEGER
  hpnicfOnuUpdateFileName OCTET STRING

HpnicfEponOnuTypeManEntry  
SEQUENCE    
  hpnicfEponOnuTypeIndex Integer32
  hpnicfEponOnuTypeDescr OCTET STRING

HpnicfOnuPacketManEntry  
SEQUENCE    
  hpnicfOnuPriorityTrust INTEGER
  hpnicfOnuQueueScheduler INTEGER

HpnicfOnuProtocolEntry  
SEQUENCE    
  hpnicfOnuStpStatus TruthValue
  hpnicfOnuIgmpSnoopingStatus TruthValue
  hpnicfOnuDhcpsnoopingOption82 TruthValue
  hpnicfOnuDhcpsnooping TruthValue
  hpnicfOnuPppoe TruthValue
  hpnicfOnuIgmpSnoopingHostAgingT Integer32
  hpnicfOnuIgmpSnoopingMaxRespT Integer32
  hpnicfOnuIgmpSnoopingRouterAgingT Integer32
  hpnicfOnuIgmpSnoopingAggReportS TruthValue
  hpnicfOnuIgmpSnoopingAggLeaveS TruthValue

HpnicfOnuDot1xEntry  
SEQUENCE    
  hpnicfOnuDot1xAccount OCTET STRING
  hpnicfOnuDot1xPassword OCTET STRING

HpnicfOnuPriorityQueueEntry  
SEQUENCE    
  hpnicfOnuQueueDirection INTEGER
  hpnicfOnuQueueId Integer32
  hpnicfOnuQueueSize Integer32

HpnicfOnuCountEntry  
SEQUENCE    
  hpnicfOnuInCRCErrPkts Counter64
  hpnicfOnuOutDroppedFrames Counter64

HpnicfOnuQueueBandwidthEntry  
SEQUENCE    
  hpnicfOnuQueueMaxBandwidth Integer32
  hpnicfOnuQueueMaxBurstsize Integer32
  hpnicfOnuQueuePolicyStatus TruthValue

HpnicfOnuIpAddressEntry  
SEQUENCE    
  hpnicfOnuIpAddress IpAddress
  hpnicfOnuIpAddressMask IpAddress
  hpnicfOnuIpAddressGateway IpAddress
  hpnicfOnuDhcpallocate TruthValue
  hpnicfOnuManageVID Integer32
  hpnicfOnuManageVlanIntfS TruthValue

HpnicfOnuChipSetInfoEntry  
SEQUENCE    
  hpnicfOnuChipSetVendorId OCTET STRING
  hpnicfOnuChipSetModel OCTET STRING
  hpnicfOnuChipSetRevision Integer32
  hpnicfOnuChipSetDesignDate DateAndTime

HpnicfOnuCapabilityEntry  
SEQUENCE    
  hpnicfOnuServiceSupported BITS
  hpnicfOnuGEPortNumber Integer32
  hpnicfOnuFEPortNumber Integer32
  hpnicfOnuPOTSPortNumber Integer32
  hpnicfOnuE1PortsNumber Integer32
  hpnicfOnuUpstreamQueueNumber Integer32
  hpnicfOnuMaxUpstreamQueuePerPort Integer32
  hpnicfOnuDownstreamQueueNumber Integer32
  hpnicfOnuMaxDownstreamQueuePerPort Integer32
  hpnicfOnuBatteryBackup TruthValue
  hpnicfOnuIgspFastLeaveSupported TruthValue
  hpnicfOnuMCtrlFastLeaveSupported TruthValue

HpnicfOnuDbaReportEntry  
SEQUENCE    
  hpnicfOnuDbaReportQueueId Integer32
  hpnicfOnuDbaReportThreshold Integer32
  hpnicfOnuDbaReportStatus INTEGER

HpnicfOnuCosToLocalPrecedenceEntry  
SEQUENCE    
  hpnicfOnuCosToLocalPrecedenceCosIndex Integer32
  hpnicfOnuCosToLocalPrecedenceValue Integer32

HpnicfEponOnuStpPortEntry  
SEQUENCE    
  hpnicfEponStpPortIndex Integer32
  hpnicfEponStpPortDescr OCTET STRING
  hpnicfEponStpPortState INTEGER

HpnicfOnuPhysicalEntry  
SEQUENCE    
  hpnicfOnuBridgeMac MacAddress
  hpnicfOnuFirstPonMac MacAddress
  hpnicfOnuFirstPonRegState INTEGER
  hpnicfOnuSecondPonMac MacAddress
  hpnicfOnuSecondPonRegState INTEGER

HpnicfOnuSmlkEntry  
SEQUENCE    
  hpnicfOnuSmlkGroupID Integer32
  hpnicfOnuSmlkFirstPonRole INTEGER
  hpnicfOnuSmlkFirstPonStatus INTEGER
  hpnicfOnuSmlkSecondPonRole INTEGER
  hpnicfOnuSmlkSecondPonStatus INTEGER

HpnicfOnuRS485PropertiesEntry  
SEQUENCE    
  hpnicfOnuRS485SerialIndex Integer32
  hpnicfOnuRS485BaudRate INTEGER
  hpnicfOnuRS485DataBits INTEGER
  hpnicfOnuRS485Parity INTEGER
  hpnicfOnuRS485StopBits INTEGER
  hpnicfOnuRS485FlowControl INTEGER
  hpnicfOnuRS485TXOctets Integer32
  hpnicfOnuRS485RXOctets Integer32
  hpnicfOnuRS485TXErrOctets Integer32
  hpnicfOnuRS485RXErrOctets Integer32
  hpnicfOnuRS485ResetStatistics INTEGER

HpnicfOnuRS485SessionSummaryEntry  
SEQUENCE    
  hpnicfOnuRS485SessionMaxNum Integer32
  hpnicfOnuRS485SessionNextIndex Integer32

HpnicfOnuRS485SessionEntry  
SEQUENCE    
  hpnicfOnuRS485SessionIndex Integer32
  hpnicfOnuRS485SessionType INTEGER
  hpnicfOnuRS485SessionAddType InetAddressType
  hpnicfOnuRS485SessionRemoteIP InetAddress
  hpnicfOnuRS485SessionRemotePort Integer32
  hpnicfOnuRS485SessionLocalPort Integer32
  hpnicfOnuRS485SessionRowStatus RowStatus

HpnicfOnuRS485SessionErrInfoEntry  
SEQUENCE    
  hpnicfOnuRS485SessionErrInfo DisplayString

HpnicfEponBatchOperationBySlotEntry  
SEQUENCE    
  hpnicfEponBatchOperationBySlotIndex Integer32
  hpnicfEponBatchOperationBySlotType INTEGER
  hpnicfEponBatchOperationBySlot INTEGER
  hpnicfEponBatchOperationBySlotResult Integer32

HpnicfEponBatchOperationByOLTEntry  
SEQUENCE    
  hpnicfEponBatchOperationByOLTType INTEGER
  hpnicfEponBatchOperationByOLT INTEGER
  hpnicfEponBatchOperationByOLTResult Integer32

HpnicfOnuFirmwareUpdateByTypeEntry  
SEQUENCE    
  hpnicfOnuUpdateByOnuTypeIndex Integer32
  hpnicfOnuUpdateByTypeOnuType OCTET STRING
  hpnicfOnuUpdateByTypeFileName OCTET STRING
  hpnicfOnuUpdateByTypeRowStatus RowStatus

HpnicfEponStatEntry  
SEQUENCE    
  hpnicfEponStatFER Counter64
  hpnicfEponStatBER Counter64

Defined Values

hpnicfEponMibObjects 1.3.6.1.4.1.11.2.14.11.15.2.42.1
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
MODULE-IDENTITY    

hpnicfEponSysMan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1
OBJECT IDENTIFIER    

hpnicfEponAutoAuthorize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfEponMonitorCycle 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgTimeOut 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgLoseNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponSysHasEPONBoard 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfEponMonitorCycleEnable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfEponOltSoftwareErrAlmEnable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfEponPortLoopBackAlmEnable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfEponMonitorCycleMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9
The lower limit of cycle which be confined to the hpnicfEponMonitorCycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponMonitorCycleMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10
The upper limit of cycle which be confined to the hpnicfEponMonitorCycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgTimeOutMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11
The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgTimeOutMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12
The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgLoseNumMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13
The lower limit of time which be confined to the hpnicfEponMsgLoseNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponMsgLoseNumMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14
The upper limit of time which be confined to the hpnicfEponMsgLoseNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponSysScalarGroup 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15
OBJECT IDENTIFIER    

hpnicfEponSysManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16
This table defines system related parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponSysManEntry

hpnicfEponSysManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1
The entry of the table hpnicfEponSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponSysManEntry  

hpnicfEponSlotIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1
Slot Index, the index of hpnicfEponSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfEponModeSwitch 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2
cmode - epon standard mode. hmode - private mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cmode(1), hmode(2)  

hpnicfEponAutomaticMode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfEponOamDiscoveryTimeout 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponEncryptionNoReplyTimeOut 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponEncryptionUpdateTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6
Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfEponAutoBindStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfEponAutoUpdateTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17
EPON auto update ONU application configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponAutoUpdateEntry

hpnicfEponAutoUpdateEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1
The entry of the table hpnicfEponAutoUpdateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponAutoUpdateEntry  

hpnicfEponAutoUpdateFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

hpnicfEponAutoUpdateSchedStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2
The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfEponAutoUpdateSchedTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3
The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hpnicfEponAutoUpdateSchedStatus is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfEponAutoUpdateSchedType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER daily(1), weekly(2), comingdate(3)  

hpnicfEponAutoUpdateRealTimeStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5
The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfEponOuiIndexNextTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18
Next OUI index table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponOuiIndexNextEntry

hpnicfEponOuiIndexNextEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1
The entry of the table hpnicfEponOuiIndexNextTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponOuiIndexNextEntry  

hpnicfEponOuiIndexNext 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1
This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponOuiTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19
List of OUI and OAM supported by OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponOuiEntry

hpnicfEponOuiEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1
The entry of the table hpnicfEponOuiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponOuiEntry  

hpnicfEponOuiIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfEponOuiValue 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

hpnicfEponOamVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3
Version of OAM protocol defined by the organization denoted by OUI.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfEponOuiRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4
The status of this table entry. Only active, createAndGo and the destory are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfEponMulticastControlTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20
Multicast control global configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponMulticastControlEntry

hpnicfEponMulticastControlEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1
The entry of the table hpnicfEponMulticastControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponMulticastControlEntry  

hpnicfEponMulticastVlanId 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfEponMulticastAddressList 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfEponMulticastStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3
The status of this table entry. Only active, createAndGo and the destory are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfEponFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2
OBJECT IDENTIFIER    

hpnicfEponDbaUpdateFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hpnicfEponOnuUpdateFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hpnicfEponOltMan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3
OBJECT IDENTIFIER    

hpnicfOltSysManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOltSysManEntry

hpnicfOltSysManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1
The entry of the table hpnicfOltSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOltSysManEntry  

hpnicfOltLaserOnTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltLaserOffTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2
The laser off time of the ONUs during the discovery process, measured in TQ.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltMultiCopyBrdCast 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltEnableDiscardPacket 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltSelfTest 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5
selftest(1): Test OLT to check whether it's OK.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selftest(1)  

hpnicfOltSelfTestResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), fail(3)  

hpnicfOltMaxRtt 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7
Set the max Round Trip Time of this OLT.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfOltInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion, hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hpnicfOltMacAddress, hpnicfOltWorkMode)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOltInfoEntry

hpnicfOltInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1
The entry of the table hpnicfOltInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOltInfoEntry  

hpnicfOltFirmMajorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1
OLT firmware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOltFirmMinorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2
OLT firmware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOltHardMajorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3
OLT hardware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOltHardMinorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4
OLT hardware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOltAgcLockTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltAgcCdrTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7
OLT MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfOltWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), open(2), reset(3), closed(4)  

hpnicfOltOpticalPowerTx 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltOpticalPowerRx 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOltDbaManEntry

hpnicfOltDbaManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1
The entry of the table hpnicfOltDbaManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOltDbaManEntry  

hpnicfOltDbaEnabledType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

hpnicfOltDbaDiscoveryLength 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2
Discovery length in TQ units.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaDiscovryFrequency 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaCycleLength 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4
The grant cycle length in TQ units.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5
DBA version of the OLT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOltDbaUpdate 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

hpnicfOltDbaUpdateResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5)  

hpnicfOltPortAlarmThresholdTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4
The table defines the alarm threshold of OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOltPortAlarmThresholdEntry

hpnicfOltPortAlarmThresholdEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1
The entry of the table hpnicfOltPortAlarmThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOltPortAlarmThresholdEntry  

hpnicfOltPortAlarmBerEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmBerDirect 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2
Traffic direction to monitor for BER alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER berUplink(1), berDownlink(2), berAll(3)  

hpnicfOltPortAlarmBerThreshold 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3
BER threshold exceed which the alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmFerEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmFerDirect 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5
Traffic direction to monitor for FER alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ferUplink(1), ferDownlink(2), ferAll(3)  

hpnicfOltPortAlarmFerThreshold 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6
Frame error rate exceed threshold then the alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmLlidMismatchEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmLlidMismatchThreshold 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmRemoteStableEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmLocalStableEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmRegistrationEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmOamDisconnectionEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmEncryptionKeyEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmVendorSpecificEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmRegExcessEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltPortAlarmDFEEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOltLaserOnTimeMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5
The lower limit of time which is confined to hpnicfOltLaserOnTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltLaserOnTimeMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6
The upper limit of time which is confined to hpnicfOltLaserOnTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltLaserOffTimeMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7
The lower limit of time which is confined to hpnicfOltLaserOffTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltLaserOffTimeMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8
The upper limit of time which is confined to hpnicfOltLaserOffTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaDiscoveryLengthMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9
The lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaDiscoveryLengthMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10
The upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaDiscovryFrequencyMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11
The lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaDiscovryFrequencyMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12
The upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaCycleLengthMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13
The lower limit of the frames which is confined to hpnicfOltDbaCycleLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltDbaCycleLengthMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14
The upper limit of the frames which is confined to hpnicfOltDbaCycleLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmLlidMisMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15
The lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmLlidMisMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16
The upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmBerMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17
The lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmBerMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18
The upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmFerMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19
The lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltPortAlarmFerMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20
The upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSilentTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21
This table is used for getting silent ONU information of OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuSilentEntry

hpnicfOnuSilentEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1
The entry of the table hpnicfOnuSilentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuSilentEntry  

hpnicfOnuSilentMacAddr 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1
The MAC address of silent ONUs in OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hpnicfOnuSilentTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2
The aging time of a silent ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltUsingOnuTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22
The table containing configurations to manage ONU interface(s) based on OLT interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOltUsingOnuEntry

hpnicfOltUsingOnuEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1
The entry of the table hpnicfOltUsingOnuTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOltUsingOnuEntry  

hpnicfOltUsingOnuNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hpnicfOltUsingOnuIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2
The ifIndex of the ONU interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOltUsingOnuRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfEponOnuMan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5
OBJECT IDENTIFIER    

hpnicfOnuSysManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuSysManEntry

hpnicfOnuSysManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1
The entry of the table hpnicfOnuSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuSysManEntry  

hpnicfOnuEncryptMan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), downlink(2), updownlink(3)  

hpnicfOnuReAuthorize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reAuthorize(1)  

hpnicfOnuMulticastFilterStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDbaReportQueueSetNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4
The number of queue sets reported in MPCP report frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuRemoteFecStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfOnuPortBerStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfOnuReset 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7
Reboot ONU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hpnicfOnuMulticastControlMode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER igmpsnooping(1), multicastcontrol(2)  

hpnicfOnuAccessVlan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9
The VLAN ID assigned to untagged frames received on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuEncryptKey 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

hpnicfOnuUniUpDownTrapStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuFecStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfOnuMcastCtrlHostAgingTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuMulticastFastLeaveEnable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuPortIsolateEnable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuLinkTestTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuLinkTestEntry

hpnicfOnuLinkTestEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1
The entry of hpnicfOnuLinkTestEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuLinkTestEntry  

hpnicfOnuLinkTestFrameNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1
Exact number of measurement frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestFrameSize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 60..1514  

hpnicfOnuLinkTestDelay 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuLinkTestVlanTag 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuLinkTestVlanPriority 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5
VLAN priority: 0-7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hpnicfOnuLinkTestVlanTagID 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6
VLAN ID: 1-4094.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

hpnicfOnuLinkTestResultSentFrameNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7
The total number of frames sent during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestResultRetFrameNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8
The total number of frames return back during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestResultRetErrFrameNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9
The total number of error frames return back during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestResultMinDelay 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestResultMeanDelay 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestResultMaxDelay 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuBandWidthTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuBandWidthEntry

hpnicfOnuBandWidthEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1
The entry of table hpnicfOnuBandWidthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuBandWidthEntry  

hpnicfOnuDownStreamBandWidthPolicy 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDownStreamMaxBandWidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000000  

hpnicfOnuDownStreamMaxBurstSize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8388480  

hpnicfOnuDownStreamHighPriorityFirst 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4
true:Enable high priority frames preference. false:Disable high priority frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDownStreamShortFrameFirst 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5
true:Enable short frames preference. false:Disable short frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuP2PBandWidthPolicy 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuP2PMaxBandWidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000000  

hpnicfOnuP2PMaxBurstSize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8388480  

hpnicfOnuP2PHighPriorityFirst 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9
true:Enable high priority frames preference. false:Disable high priority frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuP2PShortFrameFirst 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10
true:Enable short frames preference. false:Disable short frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuSlaManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuSlaManEntry

hpnicfOnuSlaManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1
The entry of table hpnicfOnuSlaManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuSlaManEntry  

hpnicfOnuSlaMaxBandWidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaMinBandWidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaBandWidthStepVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3
Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaDelay 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), high(2)  

hpnicfOnuSlaFixedBandWidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaPriorityClass 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaFixedPacketSize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7
Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion, hpnicfOnuUniMacType) (2)Several physical capabilities of the ONU. (hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime, hpnicfOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hpnicfOnuWorkMode)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuInfoEntry

hpnicfOnuInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1
The entry of the hpnicfOnuInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuInfoEntry  

hpnicfOnuHardMajorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1
ONU hardware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuHardMinorVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2
ONU hardware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuSoftwareVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3
ONU software version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuUniMacType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4
ONU User Network Interface(UNI) port MAC type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), mii(2), gmii(3), tbi(4)  

hpnicfOnuLaserOnTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLaserOffTime 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuGrantFifoDep 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255 | 2147483647  

hpnicfOnuWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), pending(3), off(4)  

hpnicfOnuPCBVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9
ONU PCB version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuRtt 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10
The signal round-trip-time(RTT) received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfOnuEEPROMVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11
ONU EEPROM version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuRegType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12
ONU registered type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuHostType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13
ONU host type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuDistance 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14
The distance between OLT and ONU, measured in meter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLlid 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuVendorId 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16
ONU vendor ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuFirmwareVersion 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17
ONU firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuOpticalPowerReceivedByOlt 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuMacAddrInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6
This table used for getting MAC address information of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuMacAddrInfoEntry

hpnicfOnuMacAddrInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1
The entry of the hpnicfEponOnuMacAddrInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuMacAddrInfoEntry  

hpnicfOnuMacIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1
The index of ONUs in one OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfOnuMacAddrFlag 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2
The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bound(1), registered(2), run(3), regIncorrect(4)  

hpnicfOnuMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3
The MAC address of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfOnuBindMacAddrTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7
This table implements the following functions for ONUs: Bind MAC of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuBindMacAddrEntry

hpnicfOnuBindMacAddrEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1
The entry of the table hpnicfOnuBindMacAddrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuBindMacAddrEntry  

hpnicfOnuBindMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hpnicfOnuBindType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2
Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuFirmwareUpdateTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuFirmwareUpdateEntry

hpnicfOnuFirmwareUpdateEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1
The entry of the table hpnicfOnuFirmwareUpdateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuFirmwareUpdateEntry  

hpnicfOnuUpdate 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1
update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

hpnicfOnuUpdateResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER updating(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5), fileNotMatchONU(6), timeout(7), otherError(8)  

hpnicfOnuUpdateFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfOnuLinkTestFrameNumMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9
The lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuLinkTestFrameNumMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10
The upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaMaxBandWidthMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11
The lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaMaxBandWidthMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12
The upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaMinBandWidthMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13
The lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSlaMinBandWidthMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14
The upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponOnuTypeManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15
This table is used for getting ONU bind type in current version.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponOnuTypeManEntry

hpnicfEponOnuTypeManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1
The entry of the hpnicfEponOnuTypeManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponOnuTypeManEntry  

hpnicfEponOnuTypeIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1
The ONU type index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfEponOnuTypeDescr 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2
The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuPacketManTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuPacketManEntry

hpnicfOnuPacketManEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1
The entry of the hpnicfOnuPacketManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuPacketManEntry  

hpnicfOnuPriorityTrust 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dscp(1), ipprecedence(2), cos(3)  

hpnicfOnuQueueScheduler 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER spq(1), wfq(2)  

hpnicfOnuProtocolTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuProtocolEntry

hpnicfOnuProtocolEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1
The entry of hpnicfOnuProtocolTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuProtocolEntry  

hpnicfOnuStpStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuIgmpSnoopingStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDhcpsnoopingOption82 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDhcpsnooping 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuPppoe 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuIgmpSnoopingHostAgingT 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6
Set the host aging time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuIgmpSnoopingMaxRespT 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7
Set the max response time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuIgmpSnoopingRouterAgingT 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8
Set the router aging time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuIgmpSnoopingAggReportS 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuIgmpSnoopingAggLeaveS 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDot1xTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuDot1xEntry

hpnicfOnuDot1xEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1
The entry of the hpnicfOnuDot1xTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuDot1xEntry  

hpnicfOnuDot1xAccount 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hpnicfOnuDot1xPassword 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2
ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hpnicfEponBatchOperationMan 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6
OBJECT IDENTIFIER    

hpnicfOnuPriorityQueueTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19
This table contains specific information of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuPriorityQueueEntry

hpnicfOnuPriorityQueueEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1
The entry of hpnicfOnuPriorityQueueTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuPriorityQueueEntry  

hpnicfOnuQueueDirection 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1
The direction of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

hpnicfOnuQueueId 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2
The queue ID of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

hpnicfOnuQueueSize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hpnicfOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuCountTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20
This table contains statistics of ONU port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuCountEntry

hpnicfOnuCountEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1
The entry of hpnicfOnuCountTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuCountEntry  

hpnicfOnuInCRCErrPkts 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1
The total number of frames received with bad CRC checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfOnuOutDroppedFrames 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2
The total number of frames dropped because of buffer failure.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfEponOnuScalarGroup 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21
OBJECT IDENTIFIER    

hpnicfOnuPriorityQueueSizeMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1
The lower limit of queue size which is confined to hpnicfOnuQueueSize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPriorityQueueSizeMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2
The upper limit of queue size which is confined to hpnicfOnuQueueSize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPriorityQueueBandwidthMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3
The lower limit of hpnicfOnuQueueMaxBandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPriorityQueueBandwidthMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4
The upper limit of hpnicfOnuQueueMaxBandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPriorityQueueBurstsizeMinVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5
The lower limit of hpnicfOnuQueueMaxBurstsize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPriorityQueueBurstsizeMaxVal 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6
The upper limit of hpnicfOnuQueueMaxBurstsize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuUpdateByTypeNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7
Offer a free index of hpnicfOnuFirmwareUpdateByTypeTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuQueueBandwidthTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22
This table contains specific bandwidth information of ONU priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuQueueBandwidthEntry

hpnicfOnuQueueBandwidthEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1
The entry of hpnicfOnuQueueBandwidthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuQueueBandwidthEntry  

hpnicfOnuQueueMaxBandwidth 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuQueueMaxBurstsize 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuQueuePolicyStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuIpAddressTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23
ONU IP address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuIpAddressEntry

hpnicfOnuIpAddressEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1
The entry of hpnicfOnuIpAddressTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuIpAddressEntry  

hpnicfOnuIpAddress 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1
The IP address assigned to the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hpnicfOnuIpAddressMask 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2
The mask of IP address denoted by hpnicfOnuIpAddress.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hpnicfOnuIpAddressGateway 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3
The gateway of IP address denoted by hpnicfOnuIpAddress.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hpnicfOnuDhcpallocate 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuManageVID 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5
The management VLAN of ONU denoted by hpnicfOnuManageVID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuManageVlanIntfS 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6
The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfOnuChipSetInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24
ONU vendor specific information of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuChipSetInfoEntry

hpnicfOnuChipSetInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1
The entry of hpnicfOnuChipSetInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuChipSetInfoEntry  

hpnicfOnuChipSetVendorId 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfOnuChipSetModel 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfOnuChipSetRevision 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3
Chip revision.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuChipSetDesignDate 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4
Chip design date.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hpnicfOnuCapabilityTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25
Capability of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuCapabilityEntry

hpnicfOnuCapabilityEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1
The entry of the table hpnicfOnuCapabilityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuCapabilityEntry  

hpnicfOnuServiceSupported 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
Status: current Access: read-only
OBJECT-TYPE    
  BITS geinterfacesupport(0), feinterfacesupport(1), voipservicesupport(2), tdmservicesupport(3)  

hpnicfOnuGEPortNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2
The current gigabit ethernet ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuFEPortNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3
the current fast ethernet ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuPOTSPortNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4
The current POTS ports number supported by the ONU
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuE1PortsNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5
The current E1 ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuUpstreamQueueNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6
The number of upstream queues supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuMaxUpstreamQueuePerPort 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7
The number of maximum upstream queues per port of the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuDownstreamQueueNumber 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8
The number of downstream queues supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuMaxDownstreamQueuePerPort 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9
The number of maximum downstream queues per port of the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuBatteryBackup 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfOnuIgspFastLeaveSupported 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfOnuMCtrlFastLeaveSupported 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hpnicfOnuDbaReportTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuDbaReportEntry

hpnicfOnuDbaReportEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1
The entry of the table hpnicfOnuDbaReportTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuDbaReportEntry  

hpnicfOnuDbaReportQueueId 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1
The DBA report queue ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfOnuDbaReportThreshold 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfOnuDbaReportStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfOnuCosToLocalPrecedenceTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27
Table of map of the COS to local-precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuCosToLocalPrecedenceEntry

hpnicfOnuCosToLocalPrecedenceEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1
Configuration information of map of the COS to local precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuCosToLocalPrecedenceEntry  

hpnicfOnuCosToLocalPrecedenceCosIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1
Index of the map, obtains from packet cos value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

hpnicfOnuCosToLocalPrecedenceValue 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2
Value of local precedence.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hpnicfEponOnuStpPortTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28
Table of ONU STP ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponOnuStpPortEntry

hpnicfEponOnuStpPortEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1
Configuration information of ONU STP ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponOnuStpPortEntry  

hpnicfEponStpPortIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1
The index of the STP ports.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..144  

hpnicfEponStpPortDescr 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2
The description of the STP ports.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hpnicfEponStpPortState 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3
The current state of the port (i.e. disabled, discarding, learning and forwarding).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER disabled(1), discarding(2), learning(3), forwarding(4)  

hpnicfOnuPhysicalTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29
This table is used for getting ONU physical information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuPhysicalEntry

hpnicfOnuPhysicalEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1
The entry of the hpnicfOnuPhysicalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuPhysicalEntry  

hpnicfOnuBridgeMac 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1
The bridge MAC address of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfOnuFirstPonMac 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2
The MAC address of ONU first PON port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfOnuFirstPonRegState 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3
The register state of ONU first PON port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notExist(1), absent(2), offline(3), silent(4), down(5), up(6)  

hpnicfOnuSecondPonMac 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4
The MAC address of ONU second PON port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfOnuSecondPonRegState 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5
The register state of ONU second PON port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notExist(1), absent(2), offline(3), silent(4), down(5), up(6)  

hpnicfOnuSmlkTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30
This table is used for getting ONU SMLK information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuSmlkEntry

hpnicfOnuSmlkEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1
The entry of the hpnicfOnuSmlkTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuSmlkEntry  

hpnicfOnuSmlkGroupID 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1
The SMLK group ID of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuSmlkFirstPonRole 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2
The role of ONU first PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), null(3)  

hpnicfOnuSmlkFirstPonStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3
The transmitting status of ONU first PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2), down(3), null(4)  

hpnicfOnuSmlkSecondPonRole 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4
The role of ONU second PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), null(3)  

hpnicfOnuSmlkSecondPonStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5
The transmitting status of ONU second PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2), down(3), null(4)  

hpnicfOnuRS485PropertiesTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31
Property table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuRS485PropertiesEntry

hpnicfOnuRS485PropertiesEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1
The entry of property table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuRS485PropertiesEntry  

hpnicfOnuRS485SerialIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1
The index of serial port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hpnicfOnuRS485BaudRate 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2
The port baud rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER baudRate300(1), baudRate600(2), baudRate1200(3), baudRate2400(4), baudRate4800(5), baudRate9600(6), baudRate19200(7), baudRate38400(8), baudRate57600(9), baudRate115200(10)  

hpnicfOnuRS485DataBits 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3
The port number of data bits in a character.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER five(1), six(2), seven(3), eight(4)  

hpnicfOnuRS485Parity 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4
The port sense of a character parity bit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

hpnicfOnuRS485StopBits 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5
The port number of stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), oneAndHalf(3)  

hpnicfOnuRS485FlowControl 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), hardware(2), xonOrxoff(3)  

hpnicfOnuRS485TXOctets 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7
The number of output octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuRS485RXOctets 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8
The number of input octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuRS485TXErrOctets 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9
The number of output error octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuRS485RXErrOctets 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10
The number of input error octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuRS485ResetStatistics 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11
Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER counting(1), clear(2)  

hpnicfOnuRS485SessionSummaryTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32
Session summary table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuRS485SessionSummaryEntry

hpnicfOnuRS485SessionSummaryEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1
The entry of session summary table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuRS485SessionSummaryEntry  

hpnicfOnuRS485SessionMaxNum 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1
The max session number of every serial port which can be supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

hpnicfOnuRS485SessionNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

hpnicfOnuRS485SessionTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuRS485SessionEntry

hpnicfOnuRS485SessionEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1
The entry of session table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuRS485SessionEntry  

hpnicfOnuRS485SessionIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1
Raw session index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hpnicfOnuRS485SessionType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER udp(1), tcpClient(2), tcpServer(3)  

hpnicfOnuRS485SessionAddType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3
This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hpnicfOnuRS485SessionRemoteIP 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

hpnicfOnuRS485SessionRemotePort 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1024..65535  

hpnicfOnuRS485SessionLocalPort 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1024..65535  

hpnicfOnuRS485SessionRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfOnuRS485SessionErrInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34
Error information table. When failed to create a session, error information can be got from this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuRS485SessionErrInfoEntry

hpnicfOnuRS485SessionErrInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1
The entry of error information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuRS485SessionErrInfoEntry  

hpnicfOnuRS485SessionErrInfo 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1
Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpnicfEponBatchOperationBySlotTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1
This table is used for batch operation by slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponBatchOperationBySlotEntry

hpnicfEponBatchOperationBySlotEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1
The entry of the hpnicfEponBatchOperationBySlotTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponBatchOperationBySlotEntry  

hpnicfEponBatchOperationBySlotIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1
The EPON board index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfEponBatchOperationBySlotType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetUnknown(1), updateDba(9), updateONU(10)  

hpnicfEponBatchOperationBySlot 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3
Execute batch operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER batOpBySlot(1)  

hpnicfEponBatchOperationBySlotResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfEponBatchOperationByOLTTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2
This table is used for batch operation by OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponBatchOperationByOLTEntry

hpnicfEponBatchOperationByOLTEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1
The entry of the hpnicfEponBatchOperationByOLTTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponBatchOperationByOLTEntry  

hpnicfEponBatchOperationByOLTType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetUnknown(1), updateONU(5)  

hpnicfEponBatchOperationByOLT 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2
Execute batch operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER batOpByOlt(1)  

hpnicfEponBatchOperationByOLTResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3
The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfOnuFirmwareUpdateByTypeTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3
This table is used to update ONU by ONU type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfOnuFirmwareUpdateByTypeEntry

hpnicfOnuFirmwareUpdateByTypeEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1
The entry of the hpnicfOnuFirmwareUpdateByTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfOnuFirmwareUpdateByTypeEntry  

hpnicfOnuUpdateByOnuTypeIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1
The type and file relationship table entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfOnuUpdateByTypeOnuType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2
The type of ONUs.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hpnicfOnuUpdateByTypeFileName 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3
The file to be updated for the type of ONUs.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfOnuUpdateByTypeRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4
The status of this table entry. Only createAndGo and destroy actions are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfEponErrorInfo 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7
OBJECT IDENTIFIER    

hpnicfEponSoftwareErrorCode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1
OLT software error code.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfOamVendorSpecificAlarmCode 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2
Alarm code of the vendor.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfEponOnuRegErrorMacAddr 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3
The MAC of ONU registered error.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hpnicfOamEventLogType 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4
The type of event that generated this entry in the event log.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hpnicfOamEventLogLocation 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hpnicfEponLoopbackPortIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6
The index of port which generate loop back event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpnicfEponLoopbackPortDescr 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7
A textual string containing information about the port generated loop back event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfOltPortAlarmLlidMisFrames 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8
the amount of mismatched frames about the LLID mismatch alarm.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hpnicfOltPortAlarmBer 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9
error bit rate.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hpnicfOltPortAlarmFer 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10
error frames rate.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hpnicfEponOnuRegSilentMac 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11
The MAC of silent ONU.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hpnicfEponOperationResult 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12
The result of EPON operation.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfEponOnuLaserState 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13
The state of ONU laser.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER normal(1), laserAlwaysOn(2), signalDegradation(3), endOfLife(4)  

hpnicfEponTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8
OBJECT IDENTIFIER    

hpnicfEponTrapPrefix 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0
OBJECT IDENTIFIER    

hpnicfEponPortAlarmBerTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1
A hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponPortAlarmFerTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2
A hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponErrorLLIDFrameTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3
A hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponLoopBackEnableTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4
A hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuRegistrationErrTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5
A hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOamDisconnectionTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6
A hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponEncryptionKeyErrTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7
A hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponRemoteStableTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8
A hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponLocalStableTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9
A hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOamVendorSpecificTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10
A hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponSoftwareErrTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11
A hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponPortAlarmBerRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12
A hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponPortAlarmFerRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13
A hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponErrorLLIDFrameRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14
A hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponLoopBackEnableRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15
A hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuRegistrationErrRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16
A hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOamDisconnectionRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17
A hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponEncryptionKeyErrRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18
A hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponRemoteStableRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19
A hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponLocalStableRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20
A hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOamVendorSpecificRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21
A hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponSoftwareErrRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22
A hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfDot3OamThresholdRecoverEvent 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23
A hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfDot3OamNonThresholdRecoverEvent 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24
A hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuRegExcessTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25
A hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuRegExcessRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26
A hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuPowerOffTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27
A hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOltSwitchoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28
A hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOltDFETrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29
A hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOltDFERecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30
A hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuSilenceTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31
The hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuSilenceRecoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32
The hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuUpdateResultTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33
A hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuAutoBindTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34
A hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuPortStpStateTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35
A hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponOnuLaserFailedTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36
A hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfOnuSmlkSwitchoverTrap 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37
A hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpnicfEponStat 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9
OBJECT IDENTIFIER    

hpnicfEponStatTable 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1
This table contains line code error statistics of epon port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponStatEntry

hpnicfEponStatEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1
The entry of hpnicfEponStatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfEponStatEntry  

hpnicfEponStatFER 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1
The frame error rate of epon port, measured in 1e-9 unit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hpnicfEponStatBER 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2
The bit error rate of epon port, measured in 1e-9 unit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64