HPN-ICF-EPON-DEVICE-MIB

File: HPN-ICF-EPON-DEVICE-MIB.mib (66535 bytes)

Imported modules

HPN-ICF-OID-MIB SNMPv2-SMI SNMPv2-TC
IF-MIB SNMPv2-CONF SNMP-FRAMEWORK-MIB

Imported symbols

hpnicfEpon MODULE-IDENTITY mib-2
OBJECT-TYPE Counter32 Unsigned32
Integer32 zeroDotZero TruthValue
DateAndTime RowStatus MacAddress
ifIndex MODULE-COMPLIANCE OBJECT-GROUP
SnmpAdminString

Defined Types

HpnicfEponDeviceControlEntry  
SEQUENCE    
  hpnicfEponDeviceObjectReset INTEGER
  hpnicfEponDeviceObjectModes INTEGER
  hpnicfEponDeviceObjectFecEnabled INTEGER
  hpnicfEponDeviceObjectOamMode INTEGER
  hpnicfEponDeviceObjectDeviceReadyMode INTEGER
  hpnicfEponDeviceObjectPowerDown TruthValue
  hpnicfEponDeviceObjectNumberOfLLIDs Integer32
  hpnicfEponDeviceObjectReportThreshold Integer32
  hpnicfEponDeviceRemoteMACAddressLLIDControl INTEGER

HpnicfEponDeviceRemoteMACAddressLLIDEntry  
SEQUENCE    
  hpnicfEponDeviceRemoteMACAddressLLIDName SnmpAdminString
  hpnicfEponDeviceRMadlLLID Unsigned32
  hpnicfEponDeviceRMadlLogID OBJECT IDENTIFIER
  hpnicfEponDeviceRMadlRemoteAddress MacAddress
  hpnicfEponDeviceRMadlType INTEGER
  hpnicfEponDeviceRMadlAction INTEGER
  hpnicfEponDeviceRMadlEntryStatus RowStatus

HpnicfEponDeviceStatEntry  
SEQUENCE    
  hpnicfEponDeviceStatTxFramesQueue0 Counter32
  hpnicfEponDeviceStatTxFramesQueue1 Counter32
  hpnicfEponDeviceStatTxFramesQueue2 Counter32
  hpnicfEponDeviceStatTxFramesQueue3 Counter32
  hpnicfEponDeviceStatTxFramesQueue4 Counter32
  hpnicfEponDeviceStatTxFramesQueue5 Counter32
  hpnicfEponDeviceStatTxFramesQueue6 Counter32
  hpnicfEponDeviceStatTxFramesQueue7 Counter32
  hpnicfEponDeviceStatRxFramesQueue0 Counter32
  hpnicfEponDeviceStatRxFramesQueue1 Counter32
  hpnicfEponDeviceStatRxFramesQueue2 Counter32
  hpnicfEponDeviceStatRxFramesQueue3 Counter32
  hpnicfEponDeviceStatRxFramesQueue4 Counter32
  hpnicfEponDeviceStatRxFramesQueue5 Counter32
  hpnicfEponDeviceStatRxFramesQueue6 Counter32
  hpnicfEponDeviceStatRxFramesQueue7 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue0 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue1 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue2 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue3 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue4 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue5 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue6 Counter32
  hpnicfEponDeviceStatDroppedFramesQueue7 Counter32

HpnicfEponDeviceEventObjectEntry  
SEQUENCE    
  hpnicfEponDeviceSampleMinimum Integer32
  hpnicfEponDeviceDyingGaspAlarmState TruthValue
  hpnicfEponDeviceDyingGaspAlarmEnabled TruthValue
  hpnicfEponDeviceCriticalEventState TruthValue
  hpnicfEponDeviceCriticalEventEnabled TruthValue
  hpnicfEponDeviceLocalLinkFaultAlarmState TruthValue
  hpnicfEponDeviceLocalLinkFaultAlarmEnabled TruthValue
  hpnicfEponDeviceTemperatureEventIndicationState TruthValue
  hpnicfEponDeviceTemperatureEventIndicationEnabled TruthValue
  hpnicfEponDevicePowerVoltageEventIndicationState TruthValue
  hpnicfEponDevicePowerVoltageEventIndicationEnabled TruthValue
  hpnicfEponDeviceGlobalEventState TruthValue
  hpnicfEponDeviceGlobalEventEnabled TruthValue
  hpnicfEponDeviceErroredSymbolPeriodEventState TruthValue
  hpnicfEponDeviceErroredSymbolPeriodEventEnabled TruthValue
  hpnicfEponDeviceErroredFrameEventState TruthValue
  hpnicfEponDeviceErroredFrameEventEnabled TruthValue
  hpnicfEponDeviceErroredFramePeriodEventState TruthValue
  hpnicfEponDeviceErroredFramePeriodEventEnabled TruthValue
  hpnicfEponDeviceErroredFrameSecondsSummaryEventState TruthValue
  hpnicfEponDeviceErroredFrameSecondsSummaryEventEnabled TruthValue
  hpnicfEponDeviceOrganizationSpecificEventState TruthValue
  hpnicfEponDeviceOrganizationSpecificEventEnabled TruthValue
  hpnicfEponDeviceEventControl INTEGER

HpnicfEponDeviceEventsLogEntry  
SEQUENCE    
  hpnicfEponDeviceEventsLogName SnmpAdminString
  hpnicfEponDeviceEventsLogIndex Unsigned32
  hpnicfEponDeviceEventsLogID OBJECT IDENTIFIER
  hpnicfEponDeviceEventsLogFirstTime DateAndTime
  hpnicfEponDeviceEventsLogLastTime DateAndTime
  hpnicfEponDeviceEventsLogCounts Counter32
  hpnicfEponDeviceEventsLogType INTEGER
  hpnicfEponDeviceEventsLogEntryStatus RowStatus

Defined Values

hpnicfEponDeviceMIB 1.3.6.1.4.1.11.2.14.11.15.2.42.4
The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65. This MIB is excerpted from the draft files directly,only changed the object name,added the hpnicf as prefix. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
MODULE-IDENTITY    

hpnicfEponDeviceObjectMIB 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1
OBJECT IDENTIFIER    

hpnicfEponDeviceObjects 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1
OBJECT IDENTIFIER    

hpnicfEponDeviceConformance 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2
OBJECT IDENTIFIER    

hpnicfEponDeviceControlObjects 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1
OBJECT IDENTIFIER    

hpnicfEponDeviceStatObjects 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2
OBJECT IDENTIFIER    

hpnicfEponDeviceEventObjects 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3
OBJECT IDENTIFIER    

hpnicfEponDeviceControlTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1
Table for EPON device MIB modules.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponDeviceControlEntry

hpnicfEponDeviceControlEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1
An entry in the EPON device Control table.
OBJECT-TYPE    
  HpnicfEponDeviceControlEntry  

hpnicfEponDeviceObjectReset 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.1
This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
OBJECT-TYPE    
  INTEGER running(1), reset(2)  

hpnicfEponDeviceObjectModes 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.2
This variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit device (client)
OBJECT-TYPE    
  INTEGER olt(1), onu(2)  

hpnicfEponDeviceObjectFecEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4
This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  INTEGER noFecEnabled(1), fecTxEnabled(2), fecRxEnabled(3), fecTxRxEnabled(4)  

hpnicfEponDeviceObjectOamMode 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.5
This variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause 57. When noOam(1) the device does not supports the OAM mode. When oamServer(2) the device supports the OAM mode as a server unit. When oamClient(3) the device supports the OAM mode as a client unit. Writing can be done during initialization, hpnicfEponDeviceObjectDeviceReadyMode is in notReady(1) or inProcess(2). This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  INTEGER noOam(1), oamServer(2), oamclient(3)  

hpnicfEponDeviceObjectDeviceReadyMode 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.6
This variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] clause 64. When notReady(1) the device is not ready for operation. When inProcess(2) the device is in initialization process. When ready(3) the device is ready for registration. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  INTEGER notReady(1), inProcess(2), ready(3)  

hpnicfEponDeviceObjectPowerDown 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.7
Setting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceObjectNumberOfLLIDs 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.8
A read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initialization value is 0. This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  Integer32  

hpnicfEponDeviceObjectReportThreshold 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.9
A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  Integer32  

hpnicfEponDeviceRemoteMACAddressLLIDControl 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.10
Indicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. All data is deleted. Setting it to useDefaultReporting(3) returns all entries priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).
OBJECT-TYPE    
  INTEGER none(1), resetLog(2), useDefaultReporting(3)  

hpnicfEponDeviceRemoteMACAddressLLIDTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2
A table of read-only value that identifies the source_address and LLIDs parameter of the remote devices in the network. This MacAddress value, as defined in [802.3ah], 30.3.5.1.5, is updated on reception of a valid frame with a unicast destination Field or (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3)an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A, and an LLID as allocated by the OLT. The table is defined as Remote MAC address - LLID (RMadL) The table is relevant only for an OLT device, and is equivalent from a bridge emulation to the bridge port-MAC address table where the LLIDs are equivalent to virtual bridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponDeviceRemoteMACAddressLLIDEntry

hpnicfEponDeviceRemoteMACAddressLLIDEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1
A group of entries. Applications create and delete entries using hpnicfEponDeviceRMadlEntryStatus. When adding objects to an LLID they are added in the persistent order of their index in this table.
OBJECT-TYPE    
  HpnicfEponDeviceRemoteMACAddressLLIDEntry  

hpnicfEponDeviceRemoteMACAddressLLIDName 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.1
A locally-unique, administratively assigned name for a group of entries.
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

hpnicfEponDeviceRMadlLLID 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.2
An arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hpnicfEponDeviceRMadlLogID 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.3
The object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hpnicfEponDeviceRMadlRemoteAddress 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.4
The remote MAC address of the LLID. Writing can be done all the time.
OBJECT-TYPE    
  MacAddress  

hpnicfEponDeviceRMadlType 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.5
A list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a registered LLID. Writing can be done all the time.
OBJECT-TYPE    
  INTEGER notRegister(1), registered(2)  

hpnicfEponDeviceRMadlAction 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.6
A list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to register an LLID, deregister(3) marks to deregister an LLID, reregister(4) marks reregistered LLID. Writing can be done all the time.
OBJECT-TYPE    
  INTEGER none(1), register(2), deregister(3), reregister(4)  

hpnicfEponDeviceRMadlEntryStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.7
The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.
OBJECT-TYPE    
  RowStatus  

hpnicfEponDeviceStatTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1
This table defines the list of statistics counters of EPON devices. The attributes are relevant for an OLT and an ONU.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponDeviceStatEntry

hpnicfEponDeviceStatEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1
Table entries for Table of statistics counters of EPON devices.
OBJECT-TYPE    
  HpnicfEponDeviceStatEntry  

hpnicfEponDeviceStatTxFramesQueue0 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.1
A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue1 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.2
A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue2 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.3
A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue3 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.4
A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue4 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.5
A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue5 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.6
A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue6 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.7
A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatTxFramesQueue7 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.8
A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue0 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.9
A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue1 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.10
A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue2 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.11
A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue3 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.12
A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue4 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.13
A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue5 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.14
A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue6 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.15
A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatRxFramesQueue7 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.16
A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue0 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.17
A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue1 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.18
A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue2 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.19
A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue3 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.20
A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue4 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.21
A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue5 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.22
A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue6 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.23
A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceStatDroppedFramesQueue7 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.24
A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceEventObjectTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1
This table defines the Event Objects for EPON devices. The attributes are relevant for an OLT and an ONU.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponDeviceEventObjectEntry

hpnicfEponDeviceEventObjectEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1
Table entries for Table of Event objects for EPON devices.
OBJECT-TYPE    
  HpnicfEponDeviceEventObjectEntry  

hpnicfEponDeviceSampleMinimum 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.1
The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suffers less overhead. Unless explicitly resource limited, a system's value for this object SHOULD be 1, allowing as small as a 1 second interval for ongoing trigger sampling. Writing of the value can be done all the time.
OBJECT-TYPE    
  Integer32 1..2147483647  

hpnicfEponDeviceDyingGaspAlarmState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.2
A read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a dying gasp alarm asserted. When false the dying gasp alarm is reset
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceDyingGaspAlarmEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.3
A control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceCriticalEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.4
A read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Critical Event asserted. When false the Critical Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceCriticalEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.5
A control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceLocalLinkFaultAlarmState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.6
A read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Local Link Fault alarm asserted. When false the Local Link Fault alarm is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceLocalLinkFaultAlarmEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.7
A control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceTemperatureEventIndicationState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.8
A read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Temperature Event Indication asserted. When false the Temperature Event Indication is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceTemperatureEventIndicationEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.9
A control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDevicePowerVoltageEventIndicationState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.10
A read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Power/Voltage Event Indication asserted. When false the Power/Voltage Event Indication is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDevicePowerVoltageEventIndicationEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.11
A control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceGlobalEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.12
A read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asserted. When the input is removed that event is de-asserted. When true the device has a Global Event asserted. When false the Global Event Indication is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceGlobalEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.13
A control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredSymbolPeriodEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.14
A read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Symbol Period Event asserted. When false the Errored Symbol Period Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredSymbolPeriodEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.15
A control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFrameEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.16
A read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Event asserted. When false the Errored Frame Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFrameEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.17
A control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFramePeriodEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.18
A read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Period Event asserted. When false the Errored Frame Period Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFramePeriodEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.19
A control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFrameSecondsSummaryEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.20
A read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Seconds Summary Event asserted. When false the Errored Frame Seconds Summary Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceErroredFrameSecondsSummaryEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.21
A control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceOrganizationSpecificEventState 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.22
A read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Organization Specific Event asserted. When false the Organization Specific Event is reset.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceOrganizationSpecificEventEnabled 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.23
A control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
OBJECT-TYPE    
  TruthValue  

hpnicfEponDeviceEventControl 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.24
Indicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Setting it to useDefaultReporting(3) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).
OBJECT-TYPE    
  INTEGER none(1), resetLog(2), useDefaultReporting(3)  

hpnicfEponDeviceEventsLogTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2
A table of objects provides a log of notification based on the event as pointed to by entries in those tables. The intent is a MAC level event log (set of events to when they happened). This attribute is relevant for an OLT and an ONU.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfEponDeviceEventsLogEntry

hpnicfEponDeviceEventsLogEntry 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1
A group of Events. Applications create and delete entries using hpnicfEponDeviceEventsEntryStatus. When adding objects to a notification they are added in the lexical order of their index in this table.
OBJECT-TYPE    
  HpnicfEponDeviceEventsLogEntry  

hpnicfEponDeviceEventsLogName 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.1
A locally-unique, administratively assigned name for a group of Events.
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

hpnicfEponDeviceEventsLogIndex 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.2
An arbitrary integer for the purpose of identifying individual Events within a hpnicfEponDeviceEventsLogName group. Events within a group are placed in the notification in the numerical order of this index.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

hpnicfEponDeviceEventsLogID 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.3
The object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hpnicfEponDeviceEventsLogFirstTime 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.4
The time that an entry was created.
OBJECT-TYPE    
  DateAndTime  

hpnicfEponDeviceEventsLogLastTime 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.5
If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as hpnicfEponDeviceEventsLogFirstTime.
OBJECT-TYPE    
  DateAndTime  

hpnicfEponDeviceEventsLogCounts 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.6
The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event.
OBJECT-TYPE    
  Counter32  

hpnicfEponDeviceEventsLogType 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.7
A list of types for Events. Events are ordered according to their significance where 1 is the highest severity. hpnicfEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp Alarm State, hpnicfEponDeviceCriticalEventState(2) indicates a Critical Event State, hpnicfEponDeviceLocalLinkFaultAlarmState(3) indicates a Local Link Fault Alarm State, hpnicfEponDeviceTemperatureEventIndicationState(4) indicates a Temperature Event Indication State, hpnicfEponDevicePowerVoltageEventIndicationState(5) indicates a Power Voltage Event Indication State, hpnicfEponDeviceGlobalEventState(6) indicates a Global Event State, hpnicfEponDeviceErroredSymbolPeriodEventState(7) indicates an Errored Symbol Period Event State, hpnicfEponDeviceErroredFrameEventState(8) indicates an Errored Frame Event State, hpnicfEponDeviceErroredFramePeriodEventState(9) indicates an Errored Frame Period Event State, hpnicfEponDeviceErroredFrameSecondsSummaryEventState(10) indicates an Errored Frame Seconds Summary Event State, hpnicfEponDeviceOrganizationSpecificEventState(11) indicates an Organization Specific Event State.
OBJECT-TYPE    
  INTEGER hpnicfEponDeviceDyingGaspAlarmState(1), hpnicfEponDeviceCriticalEventState(2), hpnicfEponDeviceLocalLinkFaultAlarmState(3), hpnicfEponDeviceTemperatureEventIndicationState(4), hpnicfEponDevicePowerVoltageEventIndicationState(5), hpnicfEponDeviceGlobalEventState(6), hpnicfEponDeviceErroredSymbolPeriodEventState(7), hpnicfEponDeviceErroredFrameEventState(8), hpnicfEponDeviceErroredFramePeriodEventState(9), hpnicfEponDeviceErroredFrameSecondsSummaryEventState(10), hpnicfEponDeviceOrganizationSpecificEventState(11)  

hpnicfEponDeviceEventsLogEntryStatus 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.8
The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.
OBJECT-TYPE    
  RowStatus  

hpnicfEponDeviceGroups 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1
OBJECT IDENTIFIER    

hpnicfEponDeviceGroupControl 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.1
A collection of objects of hpnicfEponDevice control definition.
OBJECT-GROUP    

hpnicfEponDeviceGroupRMadLTable 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.2
A collection of objects of hpnicfEponDevice remote Mac address to LLID table.
OBJECT-GROUP    

hpnicfEponDeviceGroupStat 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.3
A collection of objects of EPON device Statistics
OBJECT-GROUP    

hpnicfEponDeviceGroupEvent 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.4
A collection of objects for EPON device Events
OBJECT-GROUP    

hpnicfEponDeviceGroupEventLog 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.5
A collection of objects for EPON device Events log
OBJECT-GROUP    

hpnicfEponDeviceCompliances 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.2
OBJECT IDENTIFIER    

hpnicfEponDeviceCompliance 1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.2.1
The compliance statement for EPON Devices.
MODULE-COMPLIANCE