HPN-ICF-DOT11-QOS-MIB

File: HPN-ICF-DOT11-QOS-MIB.mib (21345 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI HPN-ICF-DOT11-REF-MIB

Imported symbols

TruthValue TEXTUAL-CONVENTION MODULE-IDENTITY
OBJECT-TYPE Integer32 hpnicfDot11
HpnicfDot11QosAcType HpnicfDot11RadioElementIndex HpnicfDot11ObjectIDType
HpnicfDot11RadioScopeType

Defined Types

HpnicfDot11WMMSVPMapAC  
The AC level which SVP packets are assigned to. acbk : for background access category, acbe : for best-effort access category, acvi : for voice access category, acvo : for video access category, disable : for disable SVP feature
TEXTUAL-CONVENTION    
  INTEGER acbk(1), acbe(2), acvi(3), acvo(4), disable(5)  

HpnicfDot11WMMCACPolicy  
The policy of CAC. channelUtilization : the channel utilization-based admission policy for CAC, userNumber : the users-based admission policy for CAC
TEXTUAL-CONVENTION    
  INTEGER channelUtilization(1), userNumber(2)  

HpnicfDot11RadioWmmCfgEntry  
SEQUENCE    
  hpnicfDot11WmmRadioIndex HpnicfDot11RadioElementIndex
  hpnicfDot11RadioWmmEnabled TruthValue
  hpnicfDot11RadioSVPMapToAC HpnicfDot11WMMSVPMapAC
  hpnicfDot11RadioCacPolicy HpnicfDot11WMMCACPolicy
  hpnicfDot11RadioCacChlUtlValue Integer32
  hpnicfDot11RadioCacUserNum Integer32

HpnicfDot11RadioWmmEdcaCfgEntry  
SEQUENCE    
  hpnicfDot11RadioWmmAC HpnicfDot11QosAcType
  hpnicfDot11RadioWmmAifsn Integer32
  hpnicfDot11RadioWmmEcwMin Integer32
  hpnicfDot11RadioWmmEcwMax Integer32
  hpnicfDot11RadioWmmTxoplimit Integer32
  hpnicfDot11RadioWmmNoAck TruthValue

HpnicfDot11StationWmmEdcaEntry  
SEQUENCE    
  hpnicfDot11StationWmmAC HpnicfDot11QosAcType
  hpnicfDot11StationWmmAifsn Integer32
  hpnicfDot11StationWmmEcwMin Integer32
  hpnicfDot11StationWmmEcwMax Integer32
  hpnicfDot11StationWmmTxoplimit Integer32
  hpnicfDot11StationWmmCacEnabled TruthValue

HpnicfDot11RadioWmmEdcaCfg2Entry  
SEQUENCE    
  hpnicfDot11WMMAPSerialID HpnicfDot11ObjectIDType
  hpnicfDot11WMMRdId HpnicfDot11RadioScopeType
  hpnicfDot11RdWmmAC HpnicfDot11QosAcType
  hpnicfDot11RdWmmAifsn Integer32
  hpnicfDot11RdWmmEcwMin Integer32
  hpnicfDot11RdWmmEcwMax Integer32
  hpnicfDot11RdWmmTxoplimit Integer32

Defined Values

hpnicfDot11QoS 1.3.6.1.4.1.11.2.14.11.15.2.75.9
This MIB provides information about WLAN QoS configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. WMM WMM is a wireless QoS protocol designed to preferentially transmit packets with high priority, thus guaranteeing better QoS services for voice and video applications in a wireless network. EDCA Enhanced distributed channel access (EDCA) is a channel contention mechanism designed by WMM to preferentially transmit packets with high priority and allocate more bandwidth to such packets. AC Access category (AC), is used for channel contention. WMM defines four access categories; they are AC-VO (voice), AC-VI (video), AC-BE (best-effort), and AC-BK (background) in the descending order of priority. When contending for a channel, a high-priority AC preempts a low-priority AC. CAC Connection admission control (CAC) limits the number of clients that are using high-priority ACs (AC-VO and AC-VI) to guarantee sufficient bandwidth for existing high-priority traffic. U-APSD Unscheduled automatic power-save delivery (U-APSD) is a new power saving mechanism defined by WMM to enhance the power saving capability of clients. SVP SpectraLink voice priority (SVP) is a voice priority protocol designed by the Spectralink company to guarantee QoS for voice traffic.
MODULE-IDENTITY    

hpnicfDot11WmmCfgGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1
OBJECT IDENTIFIER    

hpnicfDot11RadioWmmCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1
The table defines the basic parameters for WMM configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioWmmCfgEntry

hpnicfDot11RadioWmmCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1
This entry contains the basic information for WMM configuration.
OBJECT-TYPE    
  HpnicfDot11RadioWmmCfgEntry  

hpnicfDot11WmmRadioIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.1
Represents index of the radio.
OBJECT-TYPE    
  HpnicfDot11RadioElementIndex  

hpnicfDot11RadioWmmEnabled 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.2
Represents the status of WMM in radio. 'true' : The WMM function is enabled. 'false': The WMM function is disabled.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RadioSVPMapToAC 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.3
Represents the AC level which SVP packets are assigned to. 'acbk' : Specifies the AC-BK (background traffic) queue. 'acbe' : Specifies the AC-BE (best-effort traffic) queue. 'acvi' : Specifies the AC-VI (video traffic) queue. 'acvo' : Specifies the AC-VO (voice traffic) queue. 'disable' : Disable SVP packet mapping.
OBJECT-TYPE    
  HpnicfDot11WMMSVPMapAC  

hpnicfDot11RadioCacPolicy 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.4
Represents the policy for CAC. CAC requires that a client obtain permission of the AP before it can use a high-priority AC for transmission, thus guaranteeing bandwidth to the clients that have gained access. CAC controls real time traffic (AC-VO and AC-VI traffic) but not common data traffic (AC-BE and AC-BK traffic).
OBJECT-TYPE    
  HpnicfDot11WMMCACPolicy  

hpnicfDot11RadioCacChlUtlValue 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.5
Represents Maximum channel utilization rate, that is, the medium time of the accepted AC-VO traffic and AC-VI traffic to the valid time during the unit time. This object can be set only if the value of hpnicfDot11RadioCacPolicy is ChannelUtilization.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RadioCacUserNum 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.6
Represents the users-based admission policy for CAC. This object can be set only if the value of hpnicfDot11RadioCacPolicy is userNumber.
OBJECT-TYPE    
  Integer32 0..124  

hpnicfDot11RadioWmmEdcaCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2
The table defines the basic parameters for EDCA configuration of radio.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioWmmEdcaCfgEntry

hpnicfDot11RadioWmmEdcaCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1
This entry contains the basic information for EDCA configuration of radio.
OBJECT-TYPE    
  HpnicfDot11RadioWmmEdcaCfgEntry  

hpnicfDot11RadioWmmAC 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.1
Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
OBJECT-TYPE    
  HpnicfDot11QosAcType  

hpnicfDot11RadioWmmAifsn 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.2
Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
OBJECT-TYPE    
  Integer32 1..15  

hpnicfDot11RadioWmmEcwMin 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.3
Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11RadioWmmEcwMax 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.4
Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11RadioWmmTxoplimit 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.5
Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfDot11RadioWmmNoAck 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.6
Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11StationWmmEdcaTable 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3
The table defines the basic parameters for EDCA configuration of station.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11StationWmmEdcaEntry

hpnicfDot11StationWmmEdcaEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1
This entry contains the basic information for EDCA configuration of client. If CAC is enabled for an AC, CAC is also enabled for ACs with higher priority. For example, if CAC is enabled for AC-VI, CAC is also enabled for AC-VO. However, enabling CAC for AC-VO does not enable CAC for AC-VI.
OBJECT-TYPE    
  HpnicfDot11StationWmmEdcaEntry  

hpnicfDot11StationWmmAC 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.1
Represents the AC level index of EDCA parameters of client. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
OBJECT-TYPE    
  HpnicfDot11QosAcType  

hpnicfDot11StationWmmAifsn 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.2
Represents AIFSN parameter of EDCA.
OBJECT-TYPE    
  Integer32 2..15  

hpnicfDot11StationWmmEcwMin 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.3
Represents ECWmin parameter of EDCA.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11StationWmmEcwMax 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.4
Represents ECWmax parameter of EDCA.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11StationWmmTxoplimit 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.5
Represents TXOPLimit parameter of EDCA, the value is in units of 32 microseconds. The TXOP value of 0 indicates that only one MPDU can be transmitted.
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfDot11StationWmmCacEnabled 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.6
Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK. Only if the value of hpnicfDot11StationWmmAC is 'acvo' or 'acvi', Cac can be set correctly here.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11WmmResetGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4
OBJECT IDENTIFIER    

hpnicfDot11WmmResetRadioByAP 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1
Clear the WMM statistics information of the radio of the specified AP or all radios. The meaning of this object is the same as hpnicfDot11APElementIndex, it represents the index of AP element. If the value of this object is set to 0xFFFFFFFF, WMM statistics information of all radios will be cleared. The value of this object is always 0 with the get operation.
OBJECT-TYPE    
  Integer32  

hpnicfDot11WmmResetStationByAP 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.2
Clear the WMM statistics information of the clients associated with the specified AP, or of all clients. The meaning of this object is the same as hpnicfDot11APElementIndex, it represents the index of AP element. If set with the 0xFFFFFFFF, it will clear the WMM statistics information of all clients. The value of this object is always 0 with the get operation.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioWmmEdcaCfg2Table 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5
The table defines the basic parameters for EDCA configuration of radio.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioWmmEdcaCfg2Entry

hpnicfDot11RadioWmmEdcaCfg2Entry 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1
This entry contains the basic information for EDCA configuration of radio.
OBJECT-TYPE    
  HpnicfDot11RadioWmmEdcaCfg2Entry  

hpnicfDot11WMMAPSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.1
Serial ID of the AP.
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11WMMRdId 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.2
radio ID of the radio.
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11RdWmmAC 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.3
Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
OBJECT-TYPE    
  HpnicfDot11QosAcType  

hpnicfDot11RdWmmAifsn 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.4
Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
OBJECT-TYPE    
  Integer32 1..15  

hpnicfDot11RdWmmEcwMin 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.5
Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11RdWmmEcwMax 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.6
Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
OBJECT-TYPE    
  Integer32 0..15  

hpnicfDot11RdWmmTxoplimit 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.7
Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
OBJECT-TYPE    
  Integer32 0..65535