HPN-ICF-DOT11-CFG-MIB

File: HPN-ICF-DOT11-CFG-MIB.mib (164530 bytes)

Imported modules

SNMPv2-TC RFC1213-MIB SNMPv2-SMI
INET-ADDRESS-MIB HPN-ICF-DOT11-REF-MIB

Imported symbols

TruthValue RowStatus DisplayString
DateAndTime MacAddress ifIndex
MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Integer32 Unsigned32 IpAddress
InetAddress hpnicfDot11 HpnicfDot11RadioType
HpnicfDot11TxPwrLevelScopeType HpnicfDot11ChannelScopeType HpnicfDot11SSIDStringType
HpnicfDot11AuthenType HpnicfDot11RadioScopeType HpnicfDot11SSIDEncryptModeType
HpnicfDot11SecIEStatusType HpnicfDot11PreambleType HpnicfDot11ServicePolicyIDType
HpnicfDot11TunnelSecSchemType HpnicfDot11RadioElementIndex HpnicfDot11WorkMode
HpnicfDot11CirMode hpnicfDot11APElementIndex HpnicfDot11ObjectIDType
HpnicfDot11RadioType2 HpnicfDot11TruthValueCM

Defined Types

HpnicfDot11RadioPolicyEntry  
SEQUENCE    
  hpnicfDot11RadioPolicyName OCTET STRING
  hpnicfDot11BeaconInterval Integer32
  hpnicfDot11DtimInterval Integer32
  hpnicfDot11RtsThreshold Integer32
  hpnicfDot11FragThreshold Integer32
  hpnicfDot11ShortRetryThreshold Integer32
  hpnicfDot11LongRetryThreshold Integer32
  hpnicfDot11MaxRxLifetime Unsigned32
  hpnicfDot11RdoPolicyRowStatus RowStatus
  hpnicfDot11RdoClientMaxCount Integer32
  hpnicfDot11BeaconIntervalMs Integer32

HpnicfDot11ServicePolicyEntry  
SEQUENCE    
  hpnicfDot11ServicePolicyID HpnicfDot11ServicePolicyIDType
  hpnicfDot11SSIDName HpnicfDot11SSIDStringType
  hpnicfDot11SSIDHidden TruthValue
  hpnicfDot11AuthenMode HpnicfDot11AuthenType
  hpnicfDot11SSIDEncryptionMode HpnicfDot11SSIDEncryptModeType
  hpnicfDot11WlanInfBindingType OCTET STRING
  hpnicfDot11WlanInfBindingID Integer32
  hpnicfDot11SrvPolicyRowStatus RowStatus
  hpnicfDot11ClientMaxCount Integer32
  hpnicfDot11SPInCirMode HpnicfDot11CirMode
  hpnicfDot11SPInCirValue Integer32
  hpnicfDot11SPOutCirMode HpnicfDot11CirMode
  hpnicfDot11SPOutCirValue Integer32
  hpnicfDot11WlanInfPVID Integer32
  hpnicfDot11SPInCirStaticValue Integer32
  hpnicfDot11SPOutCirStaticValue Integer32
  hpnicfDot11SPIsolate TruthValue
  hpnicfDot11WlanexAuthServerIP IpAddress
  hpnicfDot11SPBeaconMeasEnable TruthValue
  hpnicfDot11SPBeaconMeasType INTEGER
  hpnicfDot11SPBeaconMeasInterval Integer32
  hpnicfDot11AuthenModeCM INTEGER
  hpnicfDot11SecIEStatusCM INTEGER
  hpnicfDot11SecurityCiphersCM INTEGER
  hpnicfDot11SrvPolicyStatusCM INTEGER
  hpnicfDot11SSIDHiddenCM HpnicfDot11TruthValueCM
  hpnicfDot11SPIsolateCM HpnicfDot11TruthValueCM

HpnicfDot11ServicePolicyExtEntry  
SEQUENCE    
  hpnicfDot11ServicePolicyExtID HpnicfDot11ServicePolicyIDType
  hpnicfDot11SecIEStatus HpnicfDot11SecIEStatusType
  hpnicfDot11SecurityCiphers Integer32
  hpnicfDot11CipherKeyIndex Integer32
  hpnicfDot11CipherKey OCTET STRING
  hpnicfDot11SrvPolicyExtRowStatus RowStatus
  hpnicfDot11CipherKeyType INTEGER

HpnicfDot11RadioPolicyExtEntry  
SEQUENCE    
  hpnicfDot11RPAPSerialID OCTET STRING
  hpnicfDot11RPRadioID HpnicfDot11RadioScopeType
  hpnicfDot11RPBeaconInterval Integer32
  hpnicfDot11RPDtimInterval Integer32
  hpnicfDot11RPRtsThreshold Integer32
  hpnicfDot11RPFragThreshold Integer32
  hpnicfDot11RPShortRetryThreshold Integer32
  hpnicfDot11RPLongRetryThreshold Integer32
  hpnicfDot11RPClientMaxCount Integer32
  hpnicfDot11RPBeaconIntervalCM Integer32

HpnicfDot11SrvPortSecurityEntry  
SEQUENCE    
  hpnicfDot11SecurityServicePolicyID HpnicfDot11ServicePolicyIDType
  hpnicfDot11SrvPortSecurityMode INTEGER
  hpnicfDot11SrvSecurityKeyType INTEGER
  hpnicfDot11SrvSecurityPskKeyMode INTEGER
  hpnicfDot11SrvSecurityPskKeyString DisplayString
  hpnicfDot11SrvPortSecurityModeCM INTEGER

HpnicfDot11SrvPolicyExtendEntry  
SEQUENCE    
  hpnicfDot11SPEnable INTEGER

HpnicfDot11APTemplateEntry  
SEQUENCE    
  hpnicfDot11APTemplateName OCTET STRING
  hpnicfDot11APSerialID OCTET STRING
  hpnicfDot11TemplateAPModelAlias OCTET STRING
  hpnicfDot11Description OCTET STRING
  hpnicfDot11APWorkMode INTEGER
  hpnicfDot11APTemplateRowStatus RowStatus
  hpnicfDot11APName OCTET STRING
  hpnicfDot11StatisInterv Integer32
  hpnicfDot11APBroadcastProbeReply TruthValue
  hpnicfDot11StaIdleTimerInterv Integer32
  hpnicfDot11StaKeepAliveTimerInterv Integer32
  hpnicfDot11APCir Integer32
  hpnicfDot11APCbs Integer32
  hpnicfDot11APPriorityLevel Integer32
  hpnicfDot11APElementID Integer32
  hpnicfDot11APDevDetectEnable TruthValue
  hpnicfDot11APGetIPMethod INTEGER
  hpnicfDot11StatisIntervMode INTEGER
  hpnicfDot11ApTrapEnabled TruthValue
  hpnicfDot11ApFmwUpdState INTEGER
  hpnicfDot11StatisIntervModeCM INTEGER
  hpnicfDot11ApNasIDCM OCTET STRING

HpnicfDot11RadioToConfigEntry  
SEQUENCE    
  hpnicfDot11APTemplateNameCfg OCTET STRING
  hpnicfDot11CfgRadioID HpnicfDot11RadioScopeType
  hpnicfDot11CfgRadioPolicyName OCTET STRING
  hpnicfDot11CfgRadioType HpnicfDot11RadioType
  hpnicfDot11CfgChannel HpnicfDot11ChannelScopeType
  hpnicfDot11CfgMaxTxPowerLevel HpnicfDot11TxPwrLevelScopeType
  hpnicfDot11PreambleLen HpnicfDot11PreambleType
  hpnicfDot11CfgRadioStatus TruthValue
  hpnicfDot11CfgRdElementID Unsigned32
  hpnicfDot11CfgWorkMode HpnicfDot11WorkMode
  hpnicfDot11CfgPwrAttValue Integer32
  hpnicfDot11RadioTxArithmetic INTEGER
  hpnicfDot11CfgChannelLockStat INTEGER
  hpnicfDot11CfgPowerLockStat INTEGER
  hpnicfDot11CfgLBRdGroupId Unsigned32
  hpnicfDot11CfgRRMSDRdGroupId Unsigned32
  hpnicfDot11CfgRadioType2 HpnicfDot11RadioType2
  hpnicfDot11CfgIDSEnable TruthValue
  hpnicfDot11CfgSaEnable TruthValue
  hpnicfDot11CfgSaCltRtFFTData TruthValue
  hpnicfDot11CfgSaBand INTEGER

HpnicfDot11APServiceSetEntry  
SEQUENCE    
  hpnicfDot11CfgServicePolicyID HpnicfDot11ServicePolicyIDType
  hpnicfDot11SrvSetRowStatus RowStatus
  hpnicfDot11ServiceSetVlanId Integer32

HpnicfDot11APSTVlanEntry  
SEQUENCE    
  hpnicfDot11CfgSTVLANID Integer32
  hpnicfDot11CfgSTNASPortID OCTET STRING
  hpnicfDot11CfgServiceSetRowStatus RowStatus
  hpnicfDot11CfgSTNASID OCTET STRING

HpnicfDot11APSysInfoSetEntry  
SEQUENCE    
  hpnicfDot11APSysNetID OCTET STRING
  hpnicfDot11APCpuUsageThreshold Integer32
  hpnicfDot11APMemUsageThreshold Integer32

HpnicfDot11APLimitEntry  
SEQUENCE    
  hpnicfDot11APSsidNumLimit Integer32
  hpnicfDot11APUserCntLimit Integer32
  hpnicfDot11APUserThreshold Integer32

HpnicfDot11APIfSetEntry  
SEQUENCE    
  hpnicfDot11APSetIfIndex Integer32
  hpnicfDot11APIfAlias DisplayString

HpnicfDot11APServiceVlanEntry  
SEQUENCE    
  hpnicfDot11APServiceVlanSerialID OCTET STRING
  hpnicfDot11APServiceVlanSPID HpnicfDot11ServicePolicyIDType
  hpnicfDot11APServiceVlanId Integer32
  hpnicfDot11APServiceVlanRowStatus RowStatus

HpnicfDot11RadioConfigEntry  
SEQUENCE    
  hpnicfDot11RCAPSerialID OCTET STRING
  hpnicfDot11RCRadioID HpnicfDot11RadioScopeType
  hpnicfDot11RCRadioType HpnicfDot11RadioType
  hpnicfDot11RCChannel HpnicfDot11ChannelScopeType
  hpnicfDot11RCPreambleLen HpnicfDot11PreambleType
  hpnicfDot11RCPwrAttValue Integer32
  hpnicfDot11RCApPowerLevel HpnicfDot11TxPwrLevelScopeType
  hpnicfDot11RCDynamicChlState TruthValue
  hpnicfDot11RCDynamicPowerState TruthValue
  hpnicfDot11RCRadioStatus TruthValue
  hpnicfDot11RCRadioRate OCTET STRING
  hpnicfDot11RCPwrAdjustStepLength Integer32
  hpnicfDot11RCRadioType2 HpnicfDot11RadioType2
  hpnicfDot11RCPreambleLenCM INTEGER
  hpnicfDot11RCDynamicChlStateCM INTEGER
  hpnicfDot11RCRadioStatusCM INTEGER
  hpnicfDot11RCRadioRateCM OCTET STRING
  hpnicfDot11RCDynamicPowerStateCM HpnicfDot11TruthValueCM
  hpnicfDot11RCRssiThresholdCM Integer32

HpnicfDot11RadioSSIDCfgEntry  
SEQUENCE    
  hpnicfDot11RadioSSIDSerialID HpnicfDot11ObjectIDType
  hpnicfDot11RadioSSIDRadioID HpnicfDot11RadioScopeType
  hpnicfDot11RadioSSIDWLANID Integer32
  hpnicfDot11RadioSSIDIndex HpnicfDot11ServicePolicyIDType
  hpnicfDot11RadioBSSID MacAddress
  hpnicfDot11RadioSSIDRowStatus RowStatus

HpnicfDot11APSerialIDEntry  
SEQUENCE    
  hpnicfDot11SIDAPSerialID OCTET STRING
  hpnicfDot11SIDAPWorkMode INTEGER
  hpnicfDot11SIDAPGetIPMethod INTEGER
  hpnicfDot11SIDAPTemplateName OCTET STRING
  hpnicfDot11SIDModelAlias OCTET STRING
  hpnicfDot11SIDAPDescription OCTET STRING
  hpnicfDot11SIDRowStatus RowStatus
  hpnicfDot11SIDAPName OCTET STRING
  hpnicfDot11SIDStatisInterv Integer32
  hpnicfDot11SIDAPBroadcastProbeReply TruthValue
  hpnicfDot11SIDAPStaIdleTimerInterv Integer32
  hpnicfDot11SIDStaKeepAliveTimerInterv Integer32
  hpnicfDot11SIDAPCir Integer32
  hpnicfDot11SIDAPCbs Integer32
  hpnicfDot11SIDAPPriorityLevel Integer32
  hpnicfDot11SIDAPElementID Integer32
  hpnicfDot11SIDAPDevDetectEnable TruthValue
  hpnicfDot11SIDAPStatisIntervMode INTEGER
  hpnicfDot11SIDAPWorkModeCM INTEGER

HpnicfDot11RadioIntfConfigEntry  
SEQUENCE    
  hpnicfDot11RadioIfIdx Integer32
  hpnicfDot11RadioCfgBeaconIntvl Integer32
  hpnicfDot11RadioCfgDtimIntvl Integer32
  hpnicfDot11RadioCfgRtsThreshold Integer32
  hpnicfDot11RadioCfgFragThreshold Integer32
  hpnicfDot11RadioCfgShtRetryThld Integer32
  hpnicfDot11RadioCfglongRtrThld Integer32
  hpnicfDot11RadioCfgMaxRxLifetime Unsigned32
  hpnicfDot11RadioCfgType HpnicfDot11RadioType
  hpnicfDot11RadioCfgChannel HpnicfDot11ChannelScopeType
  hpnicfDot11RadioCfgMaxTxPwrLvl HpnicfDot11TxPwrLevelScopeType
  hpnicfDot11RadioCfgPreambleLen HpnicfDot11PreambleType
  hpnicfDot11RadioCfgWorkMode HpnicfDot11WorkMode
  hpnicfDot11RadioCfgOnly11gEnable TruthValue
  hpnicfDot11RadioCfgType2 HpnicfDot11RadioType2
  hpnicfDot11RadioCfgRssithresholdCM Integer32

HpnicfDot11RadioIntfBindEntry  
SEQUENCE    
  hpnicfDot11RadioIntfBindSvcPlcyID HpnicfDot11ServicePolicyIDType
  hpnicfDot11RadioIntfBindIfIdx Unsigned32
  hpnicfDot11RadioIntfBindRowStatus RowStatus

HpnicfDot11DataRateConfigEntry  
SEQUENCE    
  hpnicfDot11RadioTypeID HpnicfDot11RadioType
  hpnicfDot11SupportedRateSet OCTET STRING
  hpnicfDot11MandatoryRateSet OCTET STRING
  hpnicfDot11DisabledRateSet OCTET STRING
  hpnicfDot11SmartRateSet OCTET STRING

HpnicfDot11WlanEssIfEntry  
SEQUENCE    
  hpnicfDot11WlanEssIfNumber Integer32
  hpnicfDot11WlanEssIfIndex Integer32
  hpnicfDot11WlanEssRowStatus RowStatus

HpnicfDot11WlanBssIfEntry  
SEQUENCE    
  hpnicfDot11WlanBssIfNumber Integer32
  hpnicfDot11WlanBssIfIndex Integer32
  hpnicfDot11WlanBssRowStatus RowStatus

HpnicfDot11WLANEthernetIfEntry  
SEQUENCE    
  hpnicfDot11WlanEthernetIfNumber Integer32
  hpnicfDot11WLANEthernetIfIndex Integer32
  hpnicfDot11WlanEthernetRowStatus RowStatus

HpnicfDot11PortSecurityEntry  
SEQUENCE    
  hpnicfDot11PortSecurityMode INTEGER
  hpnicfDot11SecurityUserLoginTxKeyType INTEGER
  hpnicfDot11SecurityPskKeyMode INTEGER
  hpnicfDot11SecurityPskKeyString DisplayString

HpnicfDot11WlanMeshIfEntry  
SEQUENCE    
  hpnicfDot11WlanMeshIfNumber Integer32
  hpnicfDot11WlanMeshIfIndex Integer32
  hpnicfDot11WlanMeshRowStatus RowStatus

HpnicfDot11nRadioCfgEntry  
SEQUENCE    
  hpnicfDot11nRadioCfgIndex HpnicfDot11RadioElementIndex
  hpnicfDot11nAMpduEnable TruthValue
  hpnicfDot11nAMsduEnable TruthValue
  hpnicfDot11nClientDot11nOnly TruthValue
  hpnicfDot11nChanelBand INTEGER
  hpnicfDot11nShortGiEnable TruthValue
  hpnicfDot11nClientDot11acOnly TruthValue

HpnicfDot11RadioWDSEntry  
SEQUENCE    
  hpnicfDot11RadioWDSIndex HpnicfDot11RadioElementIndex
  hpnicfDot11RadioWDSMode INTEGER
  hpnicfDot11RadioWDSNetWorkID OCTET STRING
  hpnicfDot11WDSSecPskKeyMode INTEGER
  hpnicfDot11WDSSecPskKeyString DisplayString

HpnicfDot11nRadioCfg2Entry  
SEQUENCE    
  hpnicfDot11nRadioCfg2APIDIndex HpnicfDot11ObjectIDType
  hpnicfDot11nRadioCfg2RadioIDIndex HpnicfDot11RadioScopeType
  hpnicfDot11nRadioCfg2AMpduEnable TruthValue
  hpnicfDot11nRadioCfg2AMsduEnable TruthValue
  hpnicfDot11nRadioCfg2ClientDot11nOnly TruthValue
  hpnicfDot11nRadioCfg2ChannelBand INTEGER
  hpnicfDot11nRadioCfg2ShortGiEnable TruthValue
  hpnicfDot11nRadioCfg2AMpduEnableCM INTEGER
  hpnicfDot11nRadioCfg2ChannelBandCM INTEGER
  hpnicfDot11nRadioCfg2ShortGiEnableCM INTEGER
  hpnicfDot11nRadioCfg2ClientDot11acOnly TruthValue
  hpnicfDot11nRadioCfg2ClientDot11nOnlyCM HpnicfDot11TruthValueCM

Defined Values

hpnicfDot11CFG 1.3.6.1.4.1.11.2.14.11.15.2.75.4
This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
MODULE-IDENTITY    

hpnicfDot11GlobeConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1
OBJECT IDENTIFIER    

hpnicfDot11PolicyConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2
OBJECT IDENTIFIER    

hpnicfDot11APConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3
OBJECT IDENTIFIER    

hpnicfDot11RadioIntfConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4
OBJECT IDENTIFIER    

hpnicfDot11DataRateConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5
OBJECT IDENTIFIER    

hpnicfDot11InterfaceConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6
OBJECT IDENTIFIER    

hpnicfDot11ACBackupGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.7
OBJECT IDENTIFIER    

hpnicfDot11RadioElementConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8
OBJECT IDENTIFIER    

hpnicfDot11CfgNotifyGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9
OBJECT IDENTIFIER    

hpnicfDot11GlobalCountryCode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.1
Represents the country code for wireless network.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3)  

hpnicfDot11StaKeepALiveTimerIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.2
Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11StaIdleTimerIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.3
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11BroadcastProbeReply 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.4
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11APScanMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.5
Represents the scanning mode for AP. The following values are supported: active - AP will actively do scan. passive - AP will passively do scan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

hpnicfDot11ACCtrlTunnelSecSupport 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.6
Represents what security schemes are supported for CAPWAP Control tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TunnelSecSchemType  

hpnicfDot11ACDataTunnelSecSupport 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.7
Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TunnelSecSchemType  

hpnicfDot11ACAutoAPSupport 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.8
Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11AutoAPName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.9
Represents the name of auto AP that needs to be made persistent. When read the value from the node, NULL value be returned.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11PersistentName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.10
Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11IntfTrapThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.11
Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11MonitorInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.12
Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 5..15  

hpnicfDot11SampleInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.13
Represents the sampling interval. Default value 0 : The sampling functionality is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 10..300  

hpnicfDot11ChnlSwitChkInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.14
Represents the checking interval of channel switch.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 8..180  

hpnicfDot11APUserUplimit 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.15
Represents the upper limit of user which has access to this AP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hpnicfDot11APL2IsolateEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16
Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11APBSSIDSupportNum 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.17
Represents the max number of BSSID supported by Current AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11APLastUpdateStatTime 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.18
Represents date and time update statistic information lately.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hpnicfDot11APDoSProtectEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.19
Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11MaxAPPerIf 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.20
Represents max AP number that can be connected to AC interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hpnicfDot11SampleTimeStamp 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.21
Represents the start time of current sample period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hpnicfDot11UplinkTrackId 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.22
Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RtCollectSwitch 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.23
This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, hpnicfDot11RtCollectIntvl will take effect. Otherwise, hpnicfDot11RglCollectIntvl will take effect.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RglCollectIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.24
This object represents interval to regularly collect statistics from AC to AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RtCollectIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.25
This object represents interval to collect real-time statistics from AC to AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11AllAPCpuUsageThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.26
The CPU usage threshold for all AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11AllAPMemUsageThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.27
The memory usage threshold for all AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11AdjIntfTrapThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.28
Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11AllAPMonitorMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.29
Represents what work mode for All AP. The following values are supported: normal, - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hpnicfDot11GlobalApFmwUpdState 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.30
Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfDot11ACNasIDCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.31
Represents the NAS-ID of current AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11RadioPolicyTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1
The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioPolicyEntry

hpnicfDot11RadioPolicyEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1
Each entry contains information of each radio policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioPolicyEntry  

hpnicfDot11RadioPolicyName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.1
Represents the name of radio policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11BeaconInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.2
Represents the interval for Beacon management frame.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11DtimInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.3
Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11RtsThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.4
Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11FragThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.5
Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11ShortRetryThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.6
Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, which shall be made before a failure condition is indicated.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11LongRetryThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.7
Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11MaxRxLifetime 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.8
Represents the elapsed time. After the time specified by hpnicfDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RdoPolicyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.9
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11RdoClientMaxCount 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.10
Represent the maximum number of stations supported by this radio policy.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hpnicfDot11BeaconIntervalMs 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.11
Represents the interval for Beacon management frame.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11ServicePolicyTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2
The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11ServicePolicyEntry

hpnicfDot11ServicePolicyEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1
Each entry contains information of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyEntry  

hpnicfDot11ServicePolicyID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.1
Represents the ID of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11SSIDName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.2
Represents the ESS. As per CLI, the value of service policy name will be SSID.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11SSIDStringType  

hpnicfDot11SSIDHidden 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.3
This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11AuthenMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.4
Represents the Authentication mode defined by 802.11.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11AuthenType  

hpnicfDot11SSIDEncryptionMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.5
Represents the encryption mode for this ESS.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11SSIDEncryptModeType  

hpnicfDot11WlanInfBindingType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.6
Represents the service policy will bind to what kind of data forwarding interface.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11WlanInfBindingID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.7
Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SrvPolicyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.8
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11ClientMaxCount 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.9
Represent the maximum number of stations supported by this service policy.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

hpnicfDot11SPInCirMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.10
CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11CirMode  

hpnicfDot11SPInCirValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.11
Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SPOutCirMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12
CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11CirMode  

hpnicfDot11SPOutCirValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.13
Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanInfPVID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.14
Represents the VLAN ID of SSID.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SPInCirStaticValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.15
Represents the CIR of inbound direction for static CIR mode.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SPOutCirStaticValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.16
Represents the CIR of outbound direction for static CIR mode.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SPIsolate 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.17
If it is true, then stations connected with the service policy are isolated.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11WlanexAuthServerIP 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.18
Represents the IP address of the Wlanex Authentication server
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

hpnicfDot11SPBeaconMeasEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.19
If it is true, then beacon-measurement is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11SPBeaconMeasType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.20
Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beaconTable - BeaconMeasurement will use the beacon table type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER passive(1), active(2), beaconTable(3)  

hpnicfDot11SPBeaconMeasInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.21
Represents the beacon-measurement interval.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..200  

hpnicfDot11AuthenModeCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.22
Represents the Authentication mode defined by 802.11.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER opensystem(0), sharedkey(1)  

hpnicfDot11SecIEStatusCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.23
To enable the security Information element in the beacon and probe response frames sent by AP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), wpa(1), wpa2(2), wlanex(3)  

hpnicfDot11SecurityCiphersCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.24
The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), wep40(1), wep104(2), tkip(3), aesccmp(4), wpisms4(5)  

hpnicfDot11SrvPolicyStatusCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25
The status of the Service Policy.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfDot11SSIDHiddenCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.26
This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11TruthValueCM  

hpnicfDot11SPIsolateCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.27
If it is dot11true, the clients connected with the service policy are isolated to each other.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11TruthValueCM  

hpnicfDot11ServicePolicyExtTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3
The table defines the parameters for ESS, as per service policy of CLI. When the value of hpnicfDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11ServicePolicyExtEntry

hpnicfDot11ServicePolicyExtEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1
Each entry contains information of each service policy under cipher(2) mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyExtEntry  

hpnicfDot11ServicePolicyExtID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.1
Represents the ID of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11SecIEStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.2
To enable the security Information element in the beacon and probe response frames sent by AP.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11SecIEStatusType  

hpnicfDot11SecurityCiphers 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.3
The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same time. So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11CipherKeyIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.4
Represents the key index of cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11CipherKey 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.5
Represents the cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SrvPolicyExtRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.6
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11CipherKeyType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.7
Represents the cipher key type of hpnicfDot11CipherKey.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER char(1), hex(2)  

hpnicfDot11RadioPolicyExtTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4
The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioPolicyExtEntry

hpnicfDot11RadioPolicyExtEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1
Each entry contains information of each radio policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioPolicyExtEntry  

hpnicfDot11RPAPSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.1
This object represents the Serial ID of AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11RPRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.2
This object represents each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11RPBeaconInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.3
This object represents the interval for Beacon management frame.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPDtimInterval 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.4
This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPRtsThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.5
This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPFragThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.6
This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPShortRetryThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.7
This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPLongRetryThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.8
This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, and that shall be made before a failure condition is indicated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RPClientMaxCount 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.9
This object represents the maximum number of stations supported by this radio policy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

hpnicfDot11RPBeaconIntervalCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.10
This object represents beacon interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11SrvPortSecurityTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5
This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11SrvPortSecurityEntry

hpnicfDot11SrvPortSecurityEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1
There is a row in this table for service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11SrvPortSecurityEntry  

hpnicfDot11SecurityServicePolicyID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.1
Represents the ID of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11SrvPortSecurityMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2
Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X). psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext Access to the port is denied until the port client is authenticated (by ext).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6)  

hpnicfDot11SrvSecurityKeyType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.3
This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3)  

hpnicfDot11SrvSecurityPskKeyMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.4
This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hpnicfDot11SrvSecurityPskKeyString 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.5
This is the password string used for psk authentication.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

hpnicfDot11SrvPortSecurityModeCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.6
Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), psk(1), radius(2), wlanex(3)  

hpnicfDot11SrvPolicyExtendTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6
The table defines the parameters of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11SrvPolicyExtendEntry

hpnicfDot11SrvPolicyExtendEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1
Each entry contains information of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11SrvPolicyExtendEntry  

hpnicfDot11SPEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1.1
Represents whether the service policy is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpnicfDot11APTemplateTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1
By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by hpnicfDot11APSerialID information in AP template.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APTemplateEntry

hpnicfDot11APTemplateEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1
Each entry contains configuration information for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APTemplateEntry  

hpnicfDot11APTemplateName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.1
Represents the name of AP template.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11APSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.2
Represents AP serial id.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11TemplateAPModelAlias 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.3
Represents the alias of AP model name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11Description 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.4
This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11APWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.5
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hpnicfDot11APTemplateRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.6
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11APName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.7
Represents the AP name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11StatisInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.8
Represents the interval of radio statistic.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11APBroadcastProbeReply 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.9
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11StaIdleTimerInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.10
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11StaKeepAliveTimerInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.11
Represents the interval of the keep alive requests sent between AP and STA.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11APCir 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.12
Represents the committed information rate between AP and AC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11APCbs 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.13
Represents the committed burst size between AP and AC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11APPriorityLevel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.14
This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

hpnicfDot11APElementID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.15
This object represents the AP element ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11APDevDetectEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.16
Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11APDevDetectEnable.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11APGetIPMethod 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.17
This object represents the method how AP gets IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dhcpAlloc(1), static(2)  

hpnicfDot11StatisIntervMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.18
This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), realtime(2)  

hpnicfDot11ApTrapEnabled 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.19
Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11ApFmwUpdState 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.20
Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The status will inherit value from apgroup-view or system-view.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2), inherit(3)  

hpnicfDot11StatisIntervModeCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.21
This object represents the mode of statistic interval. off - statistic interval value between 10s to 120s on - statistic interval value between 2s to 5s
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfDot11ApNasIDCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.22
Represents the NAS-ID of current service policy for each specific radio of AP.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11RadioToConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2
Before AP connects to AC, administrator will configure radio parameter to each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioToConfigEntry

hpnicfDot11RadioToConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1
Each entry contains configuration information for each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioToConfigEntry  

hpnicfDot11APTemplateNameCfg 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.1
Represents the name of AP template.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11CfgRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.2
Represents each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11CfgRadioPolicyName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.3
Represents the name of radio policy.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11CfgRadioType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.4
Represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType  

hpnicfDot11CfgChannel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.5
Represents the channel allocation of radio.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11CfgMaxTxPowerLevel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.6
Represents the maximal transmit power scope for AP.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TxPwrLevelScopeType  

hpnicfDot11PreambleLen 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.7
Represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11PreambleType  

hpnicfDot11CfgRadioStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.8
Represents the radio admin status whether is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11CfgRdElementID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.9
Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11CfgWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.10
Represents work mode of the radio.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11WorkMode  

hpnicfDot11CfgPwrAttValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.11
Represents the value of power attenuation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioTxArithmetic 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.12
Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER quality(1), bandwidth(2)  

hpnicfDot11CfgChannelLockStat 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.13
Represents locked status of channel on the radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

hpnicfDot11CfgPowerLockStat 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.14
Represents locked status of power on the radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

hpnicfDot11CfgLBRdGroupId 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.15
Represents the load balance group ID allocated for the radio.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11CfgRRMSDRdGroupId 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.16
Represents the RRM self-decisive group ID allocated for the radio.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11CfgRadioType2 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.17
Represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType2  

hpnicfDot11CfgIDSEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.18
Represents whether intrusion detection is enabled for this radio.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11CfgSaEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.19
Represents whether spectrum analysis is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11CfgSaCltRtFFTData 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.20
Represents whether to collect real-time FFT data for this radio.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11CfgSaBand 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.21
Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the following channels. dot11g (Channels 1-14) dot11aLower (channels 36-64) dot11aMiddle (channels 100-140) dot11aUpper (channels 149-165).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot11g(1), dot11aLower(2), dot11aMiddle(3), dot11aUpper(4)  

hpnicfDot11APServiceSetTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3
For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APServiceSetEntry

hpnicfDot11APServiceSetEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1
Each entry contains service policy information for each specific radio of AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APServiceSetEntry  

hpnicfDot11CfgServicePolicyID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.1
Represents the ID of each service policy used by the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11SrvSetRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.2
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11ServiceSetVlanId 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.3
Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfDot11APSTVlanTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11
For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APSTVlanEntry

hpnicfDot11APSTVlanEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1
Each entry contains VLAN and service policy information for each specific radio of AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APSTVlanEntry  

hpnicfDot11CfgSTVLANID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.1
Represents the VLAN that current Service Policy have bind to.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfDot11CfgSTNASPortID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.2
Represents the NAS Port ID of current Service Policy for each specific radio of AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11CfgServiceSetRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.3
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11CfgSTNASID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.4
Represents the NAS ID of current Service Policy for each specific radio of AP.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11APSysInfoSetTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4
The table of the system information for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APSysInfoSetEntry

hpnicfDot11APSysInfoSetEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1
The system information configuration for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APSysInfoSetEntry  

hpnicfDot11APSysNetID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.1
Represents the system Net ID for AP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11APCpuUsageThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.2
The CPU usage threshold for AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11APMemUsageThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.3
The memory usage threshold for AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11APLimitTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5
For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APLimitEntry

hpnicfDot11APLimitEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1
Each entry contains the limit information for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APLimitEntry  

hpnicfDot11APSsidNumLimit 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.1
Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfDot11APUserCntLimit 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.2
Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfDot11APUserThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.3
Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hpnicfDot11APIfSetTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6
The table of the interface information for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APIfSetEntry

hpnicfDot11APIfSetEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1
The interface information configuration for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APIfSetEntry  

hpnicfDot11APSetIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.1
Represents the index for a interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11APIfAlias 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.2
This object is an 'alias' name for the interface as specified by a network manager for AP.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hpnicfDot11APServiceVlanTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7
For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APServiceVlanEntry

hpnicfDot11APServiceVlanEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1
Each entry contains service policy information for each AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APServiceVlanEntry  

hpnicfDot11APServiceVlanSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.1
This object represents AP serial id.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11APServiceVlanSPID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.2
This object represents the ID of each service policy used by the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11APServiceVlanId 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.3
This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hpnicfDot11APServiceVlanRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.4
This object represents the status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11RadioConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8
Before AP connects to AC, administrator will configure radio parameter to each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioConfigEntry

hpnicfDot11RadioConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1
Each entry contains configuration information for each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioConfigEntry  

hpnicfDot11RCAPSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.1
This object represents the Serial ID of AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hpnicfDot11RCRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.2
This object represents each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11RCRadioType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.3
This object represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType  

hpnicfDot11RCChannel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.4
This object represents the channel allocation of radio.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11RCPreambleLen 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.5
This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11PreambleType  

hpnicfDot11RCPwrAttValue 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.6
This object represents the value of power attenuation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RCApPowerLevel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.7
Represents the maximal transmit power scope for AP.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TxPwrLevelScopeType  

hpnicfDot11RCDynamicChlState 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.8
Enable/Disable dynamic channel selection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RCDynamicPowerState 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.9
Enable/Disable dynamic power selection for the band.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RCRadioStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.10
Represents the radio admin status whether is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RCRadioRate 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11RCPwrAdjustStepLength 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12
Power adjustment step-length in dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11RCRadioType2 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.13
This object represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType2  

hpnicfDot11RCPreambleLenCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.14
This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLenCM will be valid. Otherwise, the value for it will be invalid.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(0), short(1)  

hpnicfDot11RCDynamicChlStateCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.15
Enable/Disable dynamic channel selection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfDot11RCRadioStatusCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.16
Represents the radio admin status whether is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

hpnicfDot11RCRadioRateCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11RCDynamicPowerStateCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.18
Enable/disable dynamic power selection for the band.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TruthValueCM  

hpnicfDot11RCRssiThresholdCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.19
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioSSIDCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9
For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioSSIDCfgEntry

hpnicfDot11RadioSSIDCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1
Each entry contains SSID configuration information for each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioSSIDCfgEntry  

hpnicfDot11RadioSSIDSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.1
This object represents the serial ID of AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11RadioSSIDRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.2
This object represents each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11RadioSSIDWLANID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.3
This object represents the WLAN ID of the BSSID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioSSIDIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.4
This object represents the ID of each service policy used by the radio.
Status: current Access: read-create
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11RadioBSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.5
As MAC address format, it is used to identify BSS.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hpnicfDot11RadioSSIDRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.6
RowStatus.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11APSerialIDTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10
The table will provide the general information about APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11APSerialIDEntry

hpnicfDot11APSerialIDEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1
Each entry contains the general information of an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11APSerialIDEntry  

hpnicfDot11SIDAPSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.1
Represents AP serial id.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SIDAPWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.2
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hpnicfDot11SIDAPGetIPMethod 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.3
This object represents the method how AP gets IP address.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER dhcpAlloc(1), static(2)  

hpnicfDot11SIDAPTemplateName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.4
Represents the name of AP template.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SIDModelAlias 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.5
Represents the alias of AP model name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SIDAPDescription 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.6
This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SIDRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.7
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11SIDAPName 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.8
Represents the AP name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hpnicfDot11SIDStatisInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.9
Represents the interval of radio statistic.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDAPBroadcastProbeReply 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.10
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11SIDAPStaIdleTimerInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.11
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDStaKeepAliveTimerInterv 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.12
Represents the interval of the keep alive requests sent between AP and STA.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDAPCir 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.13
Represents the committed information rate between AP and AC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDAPCbs 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.14
Represents the committed burst size between AP and AC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDAPPriorityLevel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.15
This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

hpnicfDot11SIDAPElementID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.16
This object represents the AP element ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11SIDAPDevDetectEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.17
Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11SIDAPDevDetectEnable.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpnicfDot11SIDAPStatisIntervMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.18
This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), realtime(2)  

hpnicfDot11SIDAPWorkModeCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.19
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detection is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(0), monitor(1), semimonitor(2)  

hpnicfDot11RadioIntfConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1
The table defines the parameters for radio in AP, as per radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioIntfConfigEntry

hpnicfDot11RadioIntfConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1
Each entry contains information of each radio in AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioIntfConfigEntry  

hpnicfDot11RadioIfIdx 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.1
Represents the Radio IfIndex of radio in AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgBeaconIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.2
Represents the interval for Beacon management frame.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgDtimIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.3
Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgRtsThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.4
Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgFragThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.5
Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgShtRetryThld 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.6
Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfglongRtrThld 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.7
Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioCfgMaxRxLifetime 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.8
Represents the elapsed time. After the time specified by hpnicfDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RadioCfgType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.9
Represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType  

hpnicfDot11RadioCfgChannel 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.10
Represents the channel allocation of radio.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11RadioCfgMaxTxPwrLvl 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.11
Represents the maximal transmit power scope for AP.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TxPwrLevelScopeType  

hpnicfDot11RadioCfgPreambleLen 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.12
Represents whether use long or short preamble for 802.11 MAC frame.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11PreambleType  

hpnicfDot11RadioCfgWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.13
Represents work mode of the radio.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11WorkMode  

hpnicfDot11RadioCfgOnly11gEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.14
Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RadioCfgType2 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.15
Represents the radio will work with which 802.11 radio type.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11RadioType2  

hpnicfDot11RadioCfgRssithresholdCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.16
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpnicfDot11RadioIntfBindTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2
The table defines the binding information for each radio in AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioIntfBindEntry

hpnicfDot11RadioIntfBindEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1
Each entry contains the radio interface binding information in AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioIntfBindEntry  

hpnicfDot11RadioIntfBindSvcPlcyID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.1
Represents the ID of each service policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ServicePolicyIDType  

hpnicfDot11RadioIntfBindIfIdx 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.2
Represents the Ifindex of interface which is binded to the radio.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RadioIntfBindRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.3
The status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11DataRateConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1
Table will provide data rate configuration for a specific radio type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11DataRateConfigEntry

hpnicfDot11DataRateConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1
Each entry of the table will provide data rate configuration for a specific radio type.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11DataRateConfigEntry  

hpnicfDot11RadioTypeID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.1
Represents the radio type.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioType  

hpnicfDot11SupportedRateSet 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.2
Represents the supported rate set of a particular radio type.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11MandatoryRateSet 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.3
Represents the mandatory rate set of a particular radio type.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11DisabledRateSet 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.4
Represents the disabled rate set of a particular radio type.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11SmartRateSet 1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.5
Represents the rate set of a particular radio type.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpnicfDot11WlanEssIfTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1
This table is used to configure WLAN ESS interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11WlanEssIfEntry

hpnicfDot11WlanEssIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1
Each entry contains the WLAN ESS interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11WlanEssIfEntry  

hpnicfDot11WlanEssIfNumber 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.1
This node represents the WLAN ESS interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanEssIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.2
This node represents the ifIndex of WLAN-ESS interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanEssRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.3
This node represents the WLAN ESS interface row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11WlanBssIfTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2
This table is used to configure WLAN BSS interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11WlanBssIfEntry

hpnicfDot11WlanBssIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1
Each entry contains the WLAN BSS interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11WlanBssIfEntry  

hpnicfDot11WlanBssIfNumber 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.1
This node represents the WLAN BSS interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanBssIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.2
This node represents the ifIndex of WLAN-BSS interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanBssRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.3
This node represents the WLAN BSS interface row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11WLANEthernetIfTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3
This table is used to configure WLAN Ethernet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11WLANEthernetIfEntry

hpnicfDot11WLANEthernetIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1
Each entry contains the WLAN Ethernet interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11WLANEthernetIfEntry  

hpnicfDot11WlanEthernetIfNumber 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.1
This node represents the WLAN Ethernet interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11WLANEthernetIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.2
This node represents the ifIndex of WLAN-Ethernet interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanEthernetRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.3
This node represents the Wlan Ethernet interface row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11PortSecurityTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4
This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11PortSecurityEntry

hpnicfDot11PortSecurityEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1
There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11PortSecurityEntry  

hpnicfDot11PortSecurityMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.1
Determines the security modes of the WLAN port. noRestrictions - The default value,no any security mode is set. userLoginSecureExt - Access to the port is denied until the port client is authorized (by 802.1X). psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk - The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext - Access to the port is denied until the port client is authenticated (by ext).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6)  

hpnicfDot11SecurityUserLoginTxKeyType 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.2
This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3)  

hpnicfDot11SecurityPskKeyMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.3
This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hpnicfDot11SecurityPskKeyString 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.4
This is the password string used for psk authentication.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hpnicfDot11WlanMeshIfTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5
This table is used to configure WLAN mesh interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11WlanMeshIfEntry

hpnicfDot11WlanMeshIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1
Each entry contains the WLAN mesh interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11WlanMeshIfEntry  

hpnicfDot11WlanMeshIfNumber 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.1
This node represents the WLAN mesh interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanMeshIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.2
This node represents the index of WLAN mesh interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfDot11WlanMeshRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.3
This node represents the WLAN mesh interface row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDot11BackupACAdrssIP 1.3.6.1.4.1.11.2.14.11.15.2.75.4.7.1
This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

hpnicfDot11BackupACAdrssIPv6 1.3.6.1.4.1.11.2.14.11.15.2.75.4.7.2
This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

hpnicfDot11nRadioCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1
This table is used to configure dot11n on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11nRadioCfgEntry

hpnicfDot11nRadioCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1
This entry contains the dot11n configuration on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11nRadioCfgEntry  

hpnicfDot11nRadioCfgIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.1
Represents index of the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioElementIndex  

hpnicfDot11nAMpduEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.2
Enable the function of A-MPDU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nAMsduEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.3
Enable the function of A-MSDU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nClientDot11nOnly 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.4
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nChanelBand 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.5
Specify the bandwidth mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode20(1), mode40(2), mode80(3)  

hpnicfDot11nShortGiEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.6
The function of Short GI.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nClientDot11acOnly 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.7
Only permit clients of 11ac mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RadioWDSTable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2
This table is used to configure WDS on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RadioWDSEntry

hpnicfDot11RadioWDSEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1
Each entry contains the WDS configuration on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioWDSEntry  

hpnicfDot11RadioWDSIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.1
Represents the element index of radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioElementIndex  

hpnicfDot11RadioWDSMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.2
Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nowds(1), wds(2)  

hpnicfDot11RadioWDSNetWorkID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.3
Represents the mesh ID of WDS.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hpnicfDot11WDSSecPskKeyMode 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.4
Represents the PSK mode of WDS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hpnicfDot11WDSSecPskKeyString 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.5
Represents the PSK value of WDS.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hpnicfDot11nRadioCfg2Table 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3
This table is used to configure dot11n on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11nRadioCfg2Entry

hpnicfDot11nRadioCfg2Entry 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1
This entry contains the dot11n configuration on the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11nRadioCfg2Entry  

hpnicfDot11nRadioCfg2APIDIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.1
Represents index of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11nRadioCfg2RadioIDIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.2
Represents index of the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11nRadioCfg2AMpduEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.3
Enable the function of A-MPDU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nRadioCfg2AMsduEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.4
Enable the function of A-MSDU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nRadioCfg2ClientDot11nOnly 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.5
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nRadioCfg2ChannelBand 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.6
Specify the bandwidth mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode20(1), mode40(2), mode80(3)  

hpnicfDot11nRadioCfg2ShortGiEnable 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.7
Enable the function of Short GI.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nRadioCfg2AMpduEnableCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.8
Enable the function of A-MPDU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfDot11nRadioCfg2ChannelBandCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.9
Specify the bandwidth mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode40(1), mode20(2)  

hpnicfDot11nRadioCfg2ShortGiEnableCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.10
Enable the function of Short GI.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hpnicfDot11nRadioCfg2ClientDot11acOnly 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.11
Only permit clients of 11ac mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDot11nRadioCfg2ClientDot11nOnlyCM 1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.12
If radio type is 802.11an or 802.11gn, permit only clients of 11n mode. If radio type is 802.11ac, permit clients of both 11n and 11ac mode.
Status: current Access: read-write
OBJECT-TYPE    
  HpnicfDot11TruthValueCM  

hpnicfDot11CfgNotifications 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0
OBJECT IDENTIFIER    

hpnicfDot11CfgCipherChange 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.1
This notification is sent when cipher type of corresponding service template is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hpnicfDot11CfgPSKChange 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.2
This notification is sent when pre-shared key of corresponding service template is changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

hpnicfDot11SSIDWepIDConflictTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.3
This notification will be sent when the same wep ID is configured on two service policies.
Status: current Access: read-write
NOTIFICATION-TYPE    

hpnicfDot11CfgTrapVarObjects 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1
OBJECT IDENTIFIER    

hpnicfDot11PreConflictTemplateNum 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.1
Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..1024  

hpnicfDot11CurrConflictTemplateNum 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.2
Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..1024  

hpnicfDot11ConflictCipherIdx 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.3
Represents wep ID that conflicted with.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..4  

hpnicfDot11ConfigureAPID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.4
Represents which AP is configured.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11ConfigureRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.5
Represents which radio in AP is configured.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11ConfigureAPMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.6
Represents MAC Address of AP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor