HPN-ICF-DLDP-MIB

File: HPN-ICF-DLDP-MIB.mib (13953 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI RFC1213-MIB
HPN-ICF-OID-MIB

Imported symbols

TruthValue MacAddress TEXTUAL-CONVENTION
MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 NOTIFICATION-TYPE ifIndex
hpnicfCommon

Defined Types

EnabledStatus  
The current state of the Ethernet port. This object has two defined values: - 'enabled', which indicates that the Ethernet port enables DLDP. - 'disabled', which indicates that the Ethernet port does not enable DLDP.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

DLDPStatus  
Operating state of DLDP on the port. This object has six defined values: - 'initial', which indicates that the Ethernet port does not enable DLDP. This status does not appear in the 'hpnicfDLDPPortDLDPState' object (below) because the port which is not enabled DLDP does not appear in 'hpnicfDLDPPortDLDPTable', it appears in 'hpnicfDLDPPortStateTable'. - 'inactive', which indicates that the Ethernet port enables DLDP and the link status of the port is down. - 'active', which indicates that the Ethernet port enables DLDP and the link status of the port is up. - 'advertisement', which indicates that all neighbors of the port are bidirectional communication. - 'probe', which indicates that the port sends PDU to detect the communication mode between it and it's neighbors. - 'disable', which indicates that an unidirectional communication between the port and it's neighbor. When the user get or walk the 'hpnicfDLDPPortDLDPState' objects (below) these status will output.
TEXTUAL-CONVENTION    
  INTEGER initial(1), inactive(2), active(3), advertisement(4), probe(5), disable(6)  

DLDPNeighborStatus  
The current state of the neighbor of a port. This object has three defined values: - 'unidirection', which indicates an unidirectional communication between the port and it's neighbor. - 'bidirection', which indicates a bidirectional communication between the port and it's neighbor. - 'unknown', which indicates that the port does not know the communication mode between it and it's neighbor. When the user get or walk the 'hpnicfDLDPNeighborState' objects (below) these status will output.
TEXTUAL-CONVENTION    
  INTEGER unidirection(1), bidirection(2), unknown(3)  

HpnicfDLDPPortStateEntry  
SEQUENCE    
  hpnicfDLDPPortState EnabledStatus

HpnicfDLDPPortDLDPEntry  
SEQUENCE    
  hpnicfDLDPPortDLDPState DLDPStatus
  hpnicfDLDPLinkState INTEGER
  hpnicfDLDPPortDLDPReset TruthValue

HpnicfDLDPNeighborEntry  
SEQUENCE    
  hpnicfDLDPNeighborBridgeMac MacAddress
  hpnicfDLDPNeighborPortIndex Integer32
  hpnicfDLDPNeighborState DLDPNeighborStatus
  hpnicfDLDPNeighborAgingTime Integer32

Defined Values

hpnicfDldp 1.3.6.1.4.1.11.2.14.11.15.2.43
DLDP (Device Link Detection Protocol) MIB
MODULE-IDENTITY    

hpnicfDLDPMibObject 1.3.6.1.4.1.11.2.14.11.15.2.43.1
OBJECT IDENTIFIER    

hpnicfDLDPConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1
OBJECT IDENTIFIER    

hpnicfDLDPWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.1
The work mode of DLDP. Normal mode means DLDP does not detect neighbor on its own initiative when all neighbors aged. Enhance mode means DLDP detects neighbor on its own initiative when all neighbors aged.
OBJECT-TYPE    
  INTEGER normal(1), enhance(2)  

hpnicfDLDPSystemEnable 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2
DLDP enable or disable systematically. This node only supports set operation. If setting it to true, all the fiber ports will enable DLDP and the agent automatically creates new rows for each port in hpnicfDLDPPortDLDPTable. If setting it to false, all the fiber ports will disable DLDP and the agent automatically destroy the corresponding rows in hpnicfDLDPPortDLDPTable.
OBJECT-TYPE    
  TruthValue  

hpnicfDLDPSystemReset 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.3
DLDP reset systematically. This node only supports set operation. If the value of hpnicfDLDPSystemReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. If hpnicfDLDPPortDLDPState is not disable, it does not change.
OBJECT-TYPE    
  TruthValue  

hpnicfDLDPInterval 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.4
The interval of sending an advertisement PDU. unit : second
OBJECT-TYPE    
  INTEGER 1..100  

hpnicfDLDPAuthenticationMode 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.5
Type of authentication mode.
OBJECT-TYPE    
  INTEGER none(1), simple(2), md5(3)  

hpnicfDLDPAuthenticationPassword 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.6
This is the password for authentication. If the value of hpnicfDLDPAuthenticationMode is null, the user cannot set this node. If the value of hpnicfDLDPAuthenticationMode is simple or MD5, the user must set this node with a string. When the user gets or walks this node, it displays a cipher password if hpnicfDLDPAuthenticationMode is MD5 or simple or a zero-length string if hpnicfDLDPAuthenticationMode is null.
OBJECT-TYPE    
  OCTET STRING Size(1..53)  

hpnicfDLDPUnidirectionalShutdown 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.7
The mode of unidirectional shutdown. It indicates the shutdown mode when a unidirectional link happened. Auto mode means the port will be shut down automatically when DLDP detects unidirectional link. Manual mode means the port needs to be shut down by the administrator manually when DLDP detects unidirectional link.
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

hpnicfDLDPPortStateTable 1.3.6.1.4.1.11.2.14.11.15.2.43.1.2
The table of the Ethernet ports of a LAN switch.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDLDPPortStateEntry

hpnicfDLDPPortStateEntry 1.3.6.1.4.1.11.2.14.11.15.2.43.1.2.1
Information about a hpnicfDLDPPortDLDPTable entity.
OBJECT-TYPE    
  HpnicfDLDPPortStateEntry  

hpnicfDLDPPortState 1.3.6.1.4.1.11.2.14.11.15.2.43.1.2.1.1
State of a port. If setting it to enabled, the port will enable DLDP and a new row will be added in hpnicfDLDPPortDLDPTable for this port. If setting it to disabled, the port will disable DLDP and the corresponding row will be destroyed in hpnicfDLDPPortDLDPTable.
OBJECT-TYPE    
  EnabledStatus  

hpnicfDLDPPortDLDPTable 1.3.6.1.4.1.11.2.14.11.15.2.43.1.3
Table of a LAN switch's ports, which enable DLDP.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDLDPPortDLDPEntry

hpnicfDLDPPortDLDPEntry 1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1
The information of a port, which enable DLDP.
OBJECT-TYPE    
  HpnicfDLDPPortDLDPEntry  

hpnicfDLDPPortDLDPState 1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.1
Operating state of DLDP on the port. It is relational with hpnicfDLDPPortState and hpnicfDLDPLinkState.
OBJECT-TYPE    
  DLDPStatus  

hpnicfDLDPLinkState 1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.2
The link state of the port.
OBJECT-TYPE    
  INTEGER down(1), up(2), unknown(3)  

hpnicfDLDPPortDLDPReset 1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.3
DLDP reset systematically. This node only supports set operation. If the value of hpnicfDLDPPortDLDPReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up.
OBJECT-TYPE    
  TruthValue  

hpnicfDLDPNeighborTable 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4
Table of a port's neighbors.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDLDPNeighborEntry

hpnicfDLDPNeighborEntry 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1
The information of a neighbor.
OBJECT-TYPE    
  HpnicfDLDPNeighborEntry  

hpnicfDLDPNeighborBridgeMac 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.1
The bridge MAC address of a neighbor.
OBJECT-TYPE    
  MacAddress  

hpnicfDLDPNeighborPortIndex 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.2
The port index of a neighbor.
OBJECT-TYPE    
  Integer32  

hpnicfDLDPNeighborState 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.3
The state of a neighbor.
OBJECT-TYPE    
  DLDPNeighborStatus  

hpnicfDLDPNeighborAgingTime 1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.4
The aging time of a neighbor. unit: second.
OBJECT-TYPE    
  Integer32  

hpnicfDLDPTrapObject 1.3.6.1.4.1.11.2.14.11.15.2.43.2
OBJECT IDENTIFIER    

hpnicfDLDPNotification 1.3.6.1.4.1.11.2.14.11.15.2.43.2.1
OBJECT IDENTIFIER    

hpnicfDLDPUnidirectionalPort 1.3.6.1.4.1.11.2.14.11.15.2.43.2.1.1
It will send a SNMP trap when the state of a port has changed to unidirectional-link.
NOTIFICATION-TYPE