HPN-ICF-DHCPRELAY-MIB

File: HPN-ICF-DHCPRELAY-MIB.mib (27648 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI RFC1213-MIB
INET-ADDRESS-MIB HPN-ICF-OID-MIB

Imported symbols

TruthValue RowStatus MacAddress
MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 ifIndex InetAddress
InetAddressType hpnicfCommon

Defined Types

HpnicfDHCPRIfSelectEntry  
SEQUENCE    
  hpnicfDHCPRIfSelectRelayMode INTEGER

HpnicfDHCPRIpToGroupEntry  
SEQUENCE    
  hpnicfDHCPRIpToGroupGroupId Integer32
  hpnicfDHCPRIpToGroupServerIpType InetAddressType
  hpnicfDHCPRIpToGroupServerIp InetAddress
  hpnicfDHCPRIpToGroupRowStatus RowStatus

HpnicfDHCPRIfToGroupEntry  
SEQUENCE    
  hpnicfDHCPRIfToGroupGroupId Integer32
  hpnicfDHCPRIfToGroupRowStatus RowStatus

HpnicfDHCPRAddrCheckEntry  
SEQUENCE    
  hpnicfDHCPRAddrCheckSwitch INTEGER

HpnicfDHCPRSecurityEntry  
SEQUENCE    
  hpnicfDHCPRSecurityClientIpAddrType InetAddressType
  hpnicfDHCPRSecurityClientIpAddr InetAddress
  hpnicfDHCPRSecurityClientMacAddr MacAddress
  hpnicfDHCPRSecurityClientProperty INTEGER
  hpnicfDHCPRSecurityClientRowStatus RowStatus

HpnicfDHCPRConfigOption82IfEntry  
SEQUENCE    
  hpnicfDHCPROption82IfSwitch INTEGER
  hpnicfDHCPROption82IfStrategy INTEGER
  hpnicfDHCPROption82IfFormat INTEGER
  hpnicfDHCPROption82IfNodeType INTEGER
  hpnicfDHCPROption82IfUsrDefString OCTET STRING

Defined Values

hpnicfDhcpRelay 1.3.6.1.4.1.11.2.14.11.15.2.58
DHCPR MIB
MODULE-IDENTITY    

hpnicfDHCPRMibObject 1.3.6.1.4.1.11.2.14.11.15.2.58.1
OBJECT IDENTIFIER    

hpnicfDHCPRIfSelectTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1
A table for configuring relay mode for interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRIfSelectEntry

hpnicfDHCPRIfSelectEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1
An entry for configuring relay mode for an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRIfSelectEntry  

hpnicfDHCPRIfSelectRelayMode 1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1.1
If the value is on, the DHCP relay function would be enabled on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hpnicfDHCPRIpToGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2
A table for configuring ip addresses for DHCP server groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRIpToGroupEntry

hpnicfDHCPRIpToGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1
An entry for configuring ip addresses for a DHCP server group.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRIpToGroupEntry  

hpnicfDHCPRIpToGroupGroupId 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.1
Group identifier of DHCP server group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..19  

hpnicfDHCPRIpToGroupServerIpType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.2
Ip address type of DHCP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

hpnicfDHCPRIpToGroupServerIp 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.3
Ip address of DHCP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(1..64)  

hpnicfDHCPRIpToGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.4
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDHCPRIfToGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3
A table for configuring DHCP server groups for interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRIfToGroupEntry

hpnicfDHCPRIfToGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1
An entry for configuring DHCP server group for an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRIfToGroupEntry  

hpnicfDHCPRIfToGroupGroupId 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.1
The DHCP server group for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..19  

hpnicfDHCPRIfToGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.2
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDHCPRAddrCheckTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4
A table containing the states of dhcp security address check switchs for interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRAddrCheckEntry

hpnicfDHCPRAddrCheckEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1
An entry containing the state of dhcp security address check switch for an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRAddrCheckEntry  

hpnicfDHCPRAddrCheckSwitch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1.1
The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpnicfDHCPRSecurityTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5
A table containing the information of DHCP security.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRSecurityEntry

hpnicfDHCPRSecurityEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1
An entry containing the information of DHCP security.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRSecurityEntry  

hpnicfDHCPRSecurityClientIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.1
DHCP client's net ip address type
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

hpnicfDHCPRSecurityClientIpAddr 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.2
DHCP client's net ip address
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(1..64)  

hpnicfDHCPRSecurityClientMacAddr 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.3
DHCP client's mac address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hpnicfDHCPRSecurityClientProperty 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.4
Property of client address
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

hpnicfDHCPRSecurityClientRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.5
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpnicfDHCPRStatisticsGroup 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6
OBJECT IDENTIFIER    

hpnicfDHCPRRxClientPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.1
The total number of the packets received from DHCP clients by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRTxClientPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.2
The total number of the brodcast packets transmitted to DHCP clients by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRRxServerPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.3
The total number of the packets received from DHCP Servers by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRTxServerPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.4
The total number of the packets transmitted to DHCP Servers by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRDiscoverPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.5
The total number of the DHCP Discover packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRRequestPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.6
The total number of the DHCP Request packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRDeclinePktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.7
The total number of the DHCP Decline packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRReleasePktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.8
The total number of the DHCP Release packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRInformPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.9
The total number of the DHCP Inform packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPROfferPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.10
The total number of the DHCP Offer packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRAckPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.11
The total number of the DHCP Ack packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRNakPktNum 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.12
The total number of the DHCP Nak packets handled by DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpnicfDHCPRStatisticsReset 1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.13
This node only supports set operation. If the value is true,it will clear all of the packet statistics.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpnicfDHCPRCycleGroup 1.3.6.1.4.1.11.2.14.11.15.2.58.1.7
OBJECT IDENTIFIER    

hpnicfDHCPRCycleStatus 1.3.6.1.4.1.11.2.14.11.15.2.58.1.7.1
If the value is on, the cycle function would be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hpnicfDHCPRConfigOption82Group 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8
OBJECT IDENTIFIER    

hpnicfDHCPROption82Switch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.1
If the value is enabled, DHCP relay supporting option 82 function would be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpnicfDHCPROption82HandleStrategy 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.2
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER drop(1), keep(2), replace(3)  

hpnicfDHCPRConfigOption82IfTable 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3
A table containing the information of DHCP option 82. This table depends on hpnicfDHCPRIfToGroupTable. An entry of this table will be created when an entry of hpnicfDHCPRIfToGroupTable is created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDHCPRConfigOption82IfEntry

hpnicfDHCPRConfigOption82IfEntry 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1
An entry containing the information of DHCP option 82.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfDHCPRConfigOption82IfEntry  

hpnicfDHCPROption82IfSwitch 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.1
If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpnicfDHCPROption82IfStrategy 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.2
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER drop(1), keep(2), replace(3)  

hpnicfDHCPROption82IfFormat 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.3
The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), verbose(2)  

hpnicfDHCPROption82IfNodeType 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.4
Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of hpnicfDHCPROption82IfFormat is set with 'verbose'. If the value of hpnicfDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of hpnicfDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of hpnicfDHCPROption82IfUsrDefString must be set simultaneously.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), mac(2), sysname(3), userdefine(4)  

hpnicfDHCPROption82IfUsrDefString 1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.5
The string defined by user to fill in the option 82 verbose format. If the value of hpnicfDHCPROption82IfFormat is 'normal', or the value of hpnicfDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of hpnicfDHCPROption82IfNodeType is set with 'userdefine'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)