HPN-ICF-DHCP4-MIB

File: HPN-ICF-DHCP4-MIB.mib (98975 bytes)

Imported modules

SNMPv2-TC	SNMPv2-SMI	IF-MIB
INET-ADDRESS-MIB	HPN-ICF-OID-MIB

Imported symbols

TruthValue	RowStatus	MacAddress
OBJECT-TYPE	MODULE-IDENTITY	Integer32
TimeTicks	Counter64	Unsigned32
ifIndex	InterfaceIndexOrZero	InetAddressIPv4
hpnicfCommon

Defined Types

HpnicfDhcpServer2PoolEntry
SEQUENCE
	hpnicfDhcpServer2PoolIndex	Unsigned32
	hpnicfDhcpServer2PoolName	OCTET STRING
	hpnicfDhcpServer2PoolVpnName	OCTET STRING
	hpnicfDhcpServer2PoolNetwork	InetAddressIPv4
	hpnicfDhcpServer2PoolNetworkMask	InetAddressIPv4
	hpnicfDhcpServer2PoolStartAddr	InetAddressIPv4
	hpnicfDhcpServer2PoolEndAddr	InetAddressIPv4
	hpnicfDhcpServer2PoolLeaseDay	Integer32
	hpnicfDhcpServer2PoolLeaseHour	Integer32
	hpnicfDhcpServer2PoolLeaseMinute	Integer32
	hpnicfDhcpServer2PoolLeaseSecond	Integer32
	hpnicfDhcpServer2PoolLeaseUnlimit	TruthValue
	hpnicfDhcpServer2PoolLeaseTime	TimeTicks
	hpnicfDhcpServer2PoolDomainName	OCTET STRING
	hpnicfDhcpServer2PoolGatewayIP	OCTET STRING
	hpnicfDhcpServer2PoolDNSIP	OCTET STRING
	hpnicfDhcpServer2PoolPrimaryDNSIP	InetAddressIPv4
	hpnicfDhcpServer2PoolSecondDNSIP	InetAddressIPv4
	hpnicfDhcpServer2PoolNetbiosType	INTEGER
	hpnicfDhcpServer2PoolNbnsIP	OCTET STRING
	hpnicfDhcpServer2PoolBootFileName	OCTET STRING
	hpnicfDhcpServer2PoolBimsIP	InetAddressIPv4
	hpnicfDhcpServer2PoolBimsPort	Unsigned32
	hpnicfDhcpServer2PoolBimsKeyStr	OCTET STRING
	hpnicfDhcpServer2PoolNextServer	InetAddressIPv4
	hpnicfDhcpServer2PoolTftpDomName	OCTET STRING
	hpnicfDhcpServer2PoolTftpIP	InetAddressIPv4
	hpnicfDhcpServer2PoolVoiceAsIP	InetAddressIPv4
	hpnicfDhcpServer2PoolVoiceFailIP	InetAddressIPv4
	hpnicfDhcpServer2PoolVoiceFailStr	OCTET STRING
	hpnicfDhcpServer2PoolVoiceNCPIP	InetAddressIPv4
	hpnicfDhcpServer2PoolVoiceVlanId	Unsigned32
	hpnicfDhcpServer2PoolVoiceVlanEnbl	TruthValue
	hpnicfDhcpServer2PoolRowStatus	RowStatus
	hpnicfDhcpServer2PoolVerifyClass	TruthValue

HpnicfDhcpServer2IfApplyPoolEntry
SEQUENCE
	hpnicfDhcpServer2IfApplyPoolName	OCTET STRING

HpnicfDhcpServer2PoolSecNwEntry
SEQUENCE
	hpnicfDhcpServer2PoolSecNw	InetAddressIPv4
	hpnicfDhcpServer2PoolSecNwMask	InetAddressIPv4
	hpnicfDhcpServer2PoolSecNwGwIP	OCTET STRING
	hpnicfDhcpServer2PoolSecNwStatus	RowStatus

HpnicfDhcpServer2PoolClassEntry
SEQUENCE
	hpnicfDhcpServer2PoolClassName	OCTET STRING
	hpnicfDhcpServer2PoolClassStart	InetAddressIPv4
	hpnicfDhcpServer2PoolClassEnd	InetAddressIPv4
	hpnicfDhcpServer2PoolClassStatus	RowStatus

HpnicfDhcpServer2PoolStaticEntry
SEQUENCE
	hpnicfDhcpServer2PoolStaticIP	InetAddressIPv4
	hpnicfDhcpServer2PoolStaticMask	InetAddressIPv4
	hpnicfDhcpServer2PoolStaticCID	OCTET STRING
	hpnicfDhcpServer2PoolStaticHAddr	OCTET STRING
	hpnicfDhcpServer2PoolStaticHType	INTEGER
	hpnicfDhcpServer2PoolStaticStatus	RowStatus

HpnicfDhcpServer2PoolOptionEntry
SEQUENCE
	hpnicfDhcpServer2PoolOptCode	Integer32
	hpnicfDhcpServer2PoolOptType	INTEGER
	hpnicfDhcpServer2PoolOptAscii	OCTET STRING
	hpnicfDhcpServer2PoolOptHexStr	OCTET STRING
	hpnicfDhcpServer2PoolOptIPStr	OCTET STRING
	hpnicfDhcpServer2PoolOptRowStatus	RowStatus

HpnicfDhcpServer2PoolForbidEntry
SEQUENCE
	hpnicfDhcpServer2PoolForbidIP	InetAddressIPv4
	hpnicfDhcpServer2PoolForbidStatus	RowStatus

HpnicfDhcpServer2ClassEntry
SEQUENCE
	hpnicfDhcpServer2ClassName	OCTET STRING
	hpnicfDhcpServer2ClassRowStatus	RowStatus

HpnicfDhcpServer2RuleEntry
SEQUENCE
	hpnicfDhcpServer2RuleNumber	Integer32
	hpnicfDhcpServer2RuleOptCode	Integer32
	hpnicfDhcpServer2RuleOptHexStr	OCTET STRING
	hpnicfDhcpServer2RuleOptMask	OCTET STRING
	hpnicfDhcpServer2RuleOptOffset	Integer32
	hpnicfDhcpServer2RuleOptLength	Integer32
	hpnicfDhcpServer2RuleRowStatus	RowStatus

HpnicfDhcpServer2ForbidEntry
SEQUENCE
	hpnicfDhcpServer2ForbidVpnName	OCTET STRING
	hpnicfDhcpServer2ForbidStart	InetAddressIPv4
	hpnicfDhcpServer2ForbidEnd	InetAddressIPv4
	hpnicfDhcpServer2ForbidRowStatus	RowStatus

HpnicfDhcpServer2FreeEntry
SEQUENCE
	hpnicfDhcpServer2FreeStart	InetAddressIPv4
	hpnicfDhcpServer2FreeEnd	InetAddressIPv4

HpnicfDhcpServer2ConflictEntry
SEQUENCE
	hpnicfDhcpServer2ConflictIP	InetAddressIPv4
	hpnicfDhcpServer2ConflictType	INTEGER
	hpnicfDhcpServer2ConflictTime	OCTET STRING
	hpnicfDhcpServer2ConflictRowStatus	RowStatus

HpnicfDhcpServer2ExpiredEntry
SEQUENCE
	hpnicfDhcpServer2ExpiredIP	InetAddressIPv4
	hpnicfDhcpServer2ExpiredClientId	OCTET STRING
	hpnicfDhcpServer2ExpiredTime	OCTET STRING
	hpnicfDhcpServer2ExpiredRowStatus	RowStatus

HpnicfDhcpServer2IPInUseEntry
SEQUENCE
	hpnicfDhcpServer2IPInUseIP	InetAddressIPv4
	hpnicfDhcpServer2IPInUseClientId	OCTET STRING
	hpnicfDhcpServer2IPInUseHardAddr	OCTET STRING
	hpnicfDhcpServer2IPInUseHardType	INTEGER
	hpnicfDhcpServer2IPInUseVlanId	Unsigned32
	hpnicfDhcpServer2IPInUseEndLease	OCTET STRING
	hpnicfDhcpServer2IPInUseType	INTEGER
	hpnicfDhcpServer2IPInUseIfIndex	InterfaceIndexOrZero
	hpnicfDhcpServer2IPInUseRowStatus	RowStatus

HpnicfDhcpServer2DefOptGrpEntry
SEQUENCE
	hpnicfDhcpServer2DefOptGrpClass	OCTET STRING
	hpnicfDhcpServer2DefOptGrpId	Integer32
	hpnicfDhcpServer2DefOptGrpStatus	RowStatus

HpnicfDhcpServer2ValidClassEntry
SEQUENCE
	hpnicfDhcpServer2ValidClassName	OCTET STRING
	hpnicfDhcpServer2ValidClassStatus	RowStatus

HpnicfDhcpServer2RuleHwAddrEntry
SEQUENCE
	hpnicfDhcpServer2RuleHwAddrNumber	Integer32
	hpnicfDhcpServer2RuleHwAddress	OCTET STRING
	hpnicfDhcpServer2RuleHwAddrMask	OCTET STRING
	hpnicfDhcpServer2RuleHwAddrType	Integer32
	hpnicfDhcpServer2RuleHwAddrStatus	RowStatus

HpnicfDhcpServer2OptionGroupEntry
SEQUENCE
	hpnicfDhcpServer2OptionGroupId	Integer32
	hpnicfDhcpServer2OptionGroupStatus	RowStatus

HpnicfDhcpServer2OptionEntry
SEQUENCE
	hpnicfDhcpServer2OptionCode	Integer32
	hpnicfDhcpServer2OptionType	INTEGER
	hpnicfDhcpServer2OptionAscii	OCTET STRING
	hpnicfDhcpServer2OptionHexStr	OCTET STRING
	hpnicfDhcpServer2OptionIPStr	OCTET STRING
	hpnicfDhcpServer2OptionRowStatus	RowStatus

HpnicfDhcpRelay2IfConfigEntry
SEQUENCE
	hpnicfDhcpRelay2IfSelectRelay	TruthValue
	hpnicfDhcpRelay2IfCheckMac	TruthValue
	hpnicfDhcpRelay2IfOpt82Enable	TruthValue
	hpnicfDhcpRelay2IfOpt82Strategy	INTEGER
	hpnicfDhcpRelay2IfOpt82CIDMode	INTEGER
	hpnicfDhcpRelay2IfOpt82CIDNodeType	INTEGER
	hpnicfDhcpRelay2IfOpt82CIDNodeStr	OCTET STRING
	hpnicfDhcpRelay2IfOpt82CIDStr	OCTET STRING
	hpnicfDhcpRelay2IfOpt82CIDFormat	INTEGER
	hpnicfDhcpRelay2IfOpt82RIDMode	INTEGER
	hpnicfDhcpRelay2IfOpt82RIDStr	OCTET STRING
	hpnicfDhcpRelay2IfOpt82RIDFormat	INTEGER

HpnicfDhcpRelay2SrvAddrEntry
SEQUENCE
	hpnicfDhcpRelay2SrvAddrIP	InetAddressIPv4
	hpnicfDhcpRelay2SrvAddrRowStatus	RowStatus

HpnicfDhcpRelay2UserInfoEntry
SEQUENCE
	hpnicfDhcpRelay2UserInfoVpnIndex	Unsigned32
	hpnicfDhcpRelay2UserInfoIpAddr	InetAddressIPv4
	hpnicfDhcpRelay2UserInfoMacAddr	MacAddress
	hpnicfDhcpRelay2UserInfoIfIndex	InterfaceIndexOrZero
	hpnicfDhcpRelay2UserInfoRowStatus	RowStatus

Defined Values

hpnicfDhcp4		1.3.6.1.4.1.11.2.14.11.15.2.122
DHCPv4 MIB
MODULE-IDENTITY

hpnicfDhcpServer2ScalarObjects		1.3.6.1.4.1.11.2.14.11.15.2.122.1
OBJECT IDENTIFIER

hpnicfDhcpServer2ConfigGroup		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1
OBJECT IDENTIFIER

hpnicfDhcpServer2Enabled		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.1
If the value of this object is 'true', the DHCP service is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2AlwaysBroadcast		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.2
When the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2IgnoreBootp		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.3
When the value of this object is set to 'true', the DHCP server ignores BOOTP requests.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2BootpReplyRfc1048		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.4
When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2Opt82Enabled		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.5
When the value of this object is set to 'true', the DHCP server handles DHCP option 82.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2PingNumber		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.6
The number of ping packets sent out.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10

hpnicfDhcpServer2PingTimeout		1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.7
The delay for the reply of a ping packet in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10000

hpnicfDhcpServer2StatGroup		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2
OBJECT IDENTIFIER

hpnicfDhcpServer2BadNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.1
The total number of the bad packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2BootpRequestNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.2
The total number of the BOOTREQUEST packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2DiscoverNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.3
The total number of the DHCPDISCOVER packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2RequestNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.4
The total number of the DHCPREQUEST packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2DeclineNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.5
The total number of the DHCPDECLINE packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2ReleaseNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.6
The total number of the DHCPRELEASE packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2InformNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.7
The total number of the DHCPINFORM packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2BootpReplyNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.8
The total number of the BOOTREPLY packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2OfferNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.9
The total number of the DHCPOFFER packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2AckNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.10
The total number of the DHCPACK packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2NakNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.11
The total number of the DHCPNAK packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpServer2TotalPoolUsage		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.12
The percentage of IP addresses in use of all DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

hpnicfDhcpServer2PoolNumber		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.13
The total number of DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfDhcpServer2ConflictNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.14
The total number of conflict IP in all DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfDhcpServer2AutoBindNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.15
The total number of auto binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfDhcpServer2ManualBindNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.16
The total number of manual binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfDhcpServer2ExpiredBindNum		1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.17
The total number of expired binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfDhcpServer2Tables		1.3.6.1.4.1.11.2.14.11.15.2.122.2
OBJECT IDENTIFIER

hpnicfDhcpServer2PoolTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1
A table containing DHCP server pool configurations.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolEntry

hpnicfDhcpServer2PoolEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1
An entry containing DHCP server pool configurations.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolEntry

hpnicfDhcpServer2PoolIndex		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.1
DHCP server pool index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

hpnicfDhcpServer2PoolName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.2
DHCP server pool name. Once this object is created, the value of this object cannot be modified.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..63)

hpnicfDhcpServer2PoolVpnName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.3
Name of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..31)

hpnicfDhcpServer2PoolNetwork		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.4
Network address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, hpnicfDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolNetworkMask		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.5
Network mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolStartAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.6
Start IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, hpnicfDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise hpnicfDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolEndAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.7
End IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolLeaseDay		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.8
Number of days of the lease. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolLeaseHour, hpnicfDhcpServer2PoolLeaseMinute, hpnicfDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..365

hpnicfDhcpServer2PoolLeaseHour		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.9
Number of hours of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..23

hpnicfDhcpServer2PoolLeaseMinute		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.10
Number of minutes of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..59

hpnicfDhcpServer2PoolLeaseSecond		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.11
Number of seconds of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..59

hpnicfDhcpServer2PoolLeaseUnlimit		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.12
A flag denoting whether the lease time of a DHCP pool is unlimited.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2PoolLeaseTime		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.13
The lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.
Status: current	Access: read-create
OBJECT-TYPE
	TimeTicks

hpnicfDhcpServer2PoolDomainName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.14
Domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..50)

hpnicfDhcpServer2PoolGatewayIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.15
Gateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2PoolDNSIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.16
DNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2PoolPrimaryDNSIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.17
The primary DNS server IP address to be assigned to the client.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolSecondDNSIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.18
The secondary DNS server IP address to be assigned to the client.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolNetbiosType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.19
NetBios node type for DHCP clients.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	null(0), bnode(1), pnode(2), mnode(4), hnode(8)

hpnicfDhcpServer2PoolNbnsIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.20
NetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2PoolBootFileName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.21
Boot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..63)

hpnicfDhcpServer2PoolBimsIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.22
BIMS server IP address. If the object is set with 0.0.0.0, hpnicfDhcpServer2PoolBimsPort is set with 0 and hpnicfDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise hpnicfDhcpServer2PoolBimsPort and hpnicfDhcpServer2PoolBimsKeyStr must be set at the same time while hpnicfDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolBimsPort		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.23
BIMS server port number. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolBimsIP and hpnicfDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65534

hpnicfDhcpServer2PoolBimsKeyStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.24
BIMS server key string. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolBimsIP and hpnicfDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hpnicfDhcpServer2PoolNextServer		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.25
Next DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolTftpDomName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.26
TFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..63)

hpnicfDhcpServer2PoolTftpIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.27
TFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolVoiceAsIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.28
Voice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolVoiceFailIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.29
Voice failover IP address for DHCP clients. If the object is set with 0.0.0.0, hpnicfDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise hpnicfDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolVoiceFailStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.30
Voice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..39)

hpnicfDhcpServer2PoolVoiceNCPIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.31
Voice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolVoiceVlanId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.32
Voice VLAN ID for DHCP clients. If the value of this object is set to 65535, hpnicfDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise hpnicfDhcpServer2PoolVoiceVlanEnbl must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..4094 \| 65535

hpnicfDhcpServer2PoolVoiceVlanEnbl		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.33
Enable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2PoolRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.34
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2PoolVerifyClass		1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.35
Enable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpnicfDhcpServer2IfApplyPoolTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.2
A table for applying a DHCP pool on interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2IfApplyPoolEntry

hpnicfDhcpServer2IfApplyPoolEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.2.1
An entry for applying a DHCP pool on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2IfApplyPoolEntry

hpnicfDhcpServer2IfApplyPoolName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.2.1.1
The name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..63)

hpnicfDhcpServer2PoolSecNwTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3
A table containing the secondary network configuration of DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolSecNwEntry

hpnicfDhcpServer2PoolSecNwEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1
An entry containing the objects for configuring the secondary network for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolSecNwEntry

hpnicfDhcpServer2PoolSecNw		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.1
Network address of the secondary subnets in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolSecNwMask		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.2
Network mask of the secondary subnets in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolSecNwGwIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.3
Gateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2PoolSecNwStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.4
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2PoolClassTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4
A table containing address range of the DHCP server pool for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolClassEntry

hpnicfDhcpServer2PoolClassEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1
An entry containing address range of DHCP pools for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolClassEntry

hpnicfDhcpServer2PoolClassName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

hpnicfDhcpServer2PoolClassStart		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.2
Start address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolClassEnd		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.3
End address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of hpnicfDhcpServer2PoolClassStart.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolClassStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.4
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolClassStart and hpnicfDhcpServer2PoolClassEnd must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2PoolStaticTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5
A table containing the static binding configurations in DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolStaticEntry

hpnicfDhcpServer2PoolStaticEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1
An entry containing the objects for configuring the static binding in DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolStaticEntry

hpnicfDhcpServer2PoolStaticIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.1
Ip address of a static binding in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolStaticMask		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.2
Network mask of a static binding in a DHCP pool.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolStaticCID		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.3
Client identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0\|4..254)

hpnicfDhcpServer2PoolStaticHAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.4
Hardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0\|4..39)

hpnicfDhcpServer2PoolStaticHType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.5
Hardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of hpnicfDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of hpnicfDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	default(1), ethernet(2), tokenRing(3)

hpnicfDhcpServer2PoolStaticStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolStaticCID or (hpnicfDhcpServer2PoolStaticHardAddr and hpnicfDhcpServer2PoolStaticHardType) must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2PoolOptionTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6
A table for configuring user-defined options for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolOptionEntry

hpnicfDhcpServer2PoolOptionEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1
An entry containing the objects for configuring user-defined options for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolOptionEntry

hpnicfDhcpServer2PoolOptCode		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.1
Option code.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	2..254

hpnicfDhcpServer2PoolOptType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.2
Option type. 'ascii' means using the ascii string that is defined by hpnicfDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by hpnicfDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by hpnicfDhcpServer2PoolOptIPStr to fill in the option.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ascii(1), hex(2), ip(3)

hpnicfDhcpServer2PoolOptAscii		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.3
Ascii string of an option. If hpnicfDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

hpnicfDhcpServer2PoolOptHexStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.4
Hex string of an option. The length of the string must be even. If hpnicfDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

hpnicfDhcpServer2PoolOptIPStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.5
IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hpnicfDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2PoolOptRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolOptType must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2PoolForbidTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.7
A table for configuring forbidden IP for a DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2PoolForbidEntry

hpnicfDhcpServer2PoolForbidEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1
An entry for configuring forbidden IP for a DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2PoolForbidEntry

hpnicfDhcpServer2PoolForbidIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1.1
Forbidden IP of the DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2PoolForbidStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2ClassTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.8
A table for configuring user class to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2ClassEntry

hpnicfDhcpServer2ClassEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1
An entry for configuring user class to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2ClassEntry

hpnicfDhcpServer2ClassName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1.1
DHCP user class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

hpnicfDhcpServer2ClassRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2RuleTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9
A table for configuring option rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2RuleEntry

hpnicfDhcpServer2RuleEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1
An entry for configuring option rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2RuleEntry

hpnicfDhcpServer2RuleNumber		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.1
Rule number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

hpnicfDhcpServer2RuleOptCode		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.2
Option code.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..254

hpnicfDhcpServer2RuleOptHexStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.3
Hex string of an option. The length of the string must be even.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

hpnicfDhcpServer2RuleOptMask		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.4
The mask used to match options. The length of this object must be same with that of hpnicfDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptHexStr.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

hpnicfDhcpServer2RuleOptOffset		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.5
The option offset used to match users. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptHexStr, hpnicfDhcpServer2RuleOptLength.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..254

hpnicfDhcpServer2RuleOptLength		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.6
The option length used to match user options. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptOffset.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hpnicfDhcpServer2RuleRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.7
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2RuleOptCode must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2ForbidTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10
A table for configuring forbidden IP range to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2ForbidEntry

hpnicfDhcpServer2ForbidEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1
An entry for configuring forbidden IP range to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2ForbidEntry

hpnicfDhcpServer2ForbidVpnName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.1
Name of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..31)

hpnicfDhcpServer2ForbidStart		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.2
Start IP of forbidden IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2ForbidEnd		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.3
End IP of forbidden IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2ForbidRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.4
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2FreeTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.11
A table for displaying free IP range for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2FreeEntry

hpnicfDhcpServer2FreeEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1
An entry for displaying free IP range for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2FreeEntry

hpnicfDhcpServer2FreeStart		1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1.1
Start IP of free IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2FreeEnd		1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1.2
End IP of free IP range.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2ConflictTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12
A table for displaying the information of conflict IP for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2ConflictEntry

hpnicfDhcpServer2ConflictEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1
An entry for displaying the information of conflict IP for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2ConflictEntry

hpnicfDhcpServer2ConflictIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.1
Conflict IP.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2ConflictType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.2
Type of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	detectByServer(1), detectByClient(2)

hpnicfDhcpServer2ConflictTime		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.3
Time when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

hpnicfDhcpServer2ConflictRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.4
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2ExpiredTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13
A table for displaying the information of expired IP for DHCP Server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2ExpiredEntry

hpnicfDhcpServer2ExpiredEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1
An entry of objects for displaying information of expired IP for DHCP server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2ExpiredEntry

hpnicfDhcpServer2ExpiredIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.1
Expired IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2ExpiredClientId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.2
Client identifier or hardware address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4..254)

hpnicfDhcpServer2ExpiredTime		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.3
Expired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

hpnicfDhcpServer2ExpiredRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.4
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2IPInUseTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14
A table for displaying the information of IP in use for DHCP Server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2IPInUseEntry

hpnicfDhcpServer2IPInUseEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1
An entry of objects for displaying information of IP in use for DHCP server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2IPInUseEntry

hpnicfDhcpServer2IPInUseIP		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.1
Ip address in use.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpServer2IPInUseClientId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.2
Client identifier.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..254)

hpnicfDhcpServer2IPInUseHardAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.3
Hardware address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..39)

hpnicfDhcpServer2IPInUseHardType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.4
Hardware address type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	default(1), ethernet(2), tokenRing(3)

hpnicfDhcpServer2IPInUseVlanId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.5
User's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4094 \| 65535

hpnicfDhcpServer2IPInUseEndLease		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.6
End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

hpnicfDhcpServer2IPInUseType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.7
Type of binding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	staticUnallocated(1), staticOffered(2), staticCommitted(3), autoOffered(4), autoCommitted(5)

hpnicfDhcpServer2IPInUseIfIndex		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.8
Interface index information. If the value of this object is zero, the interface is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

hpnicfDhcpServer2IPInUseRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.9
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2DefOptGrpTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.15
A table containing option group of the DHCP server pool for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2DefOptGrpEntry

hpnicfDhcpServer2DefOptGrpEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1
An entry containing option group of DHCP pools for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2DefOptGrpEntry

hpnicfDhcpServer2DefOptGrpClass		1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

hpnicfDhcpServer2DefOptGrpId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.2
The option group ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..32768

hpnicfDhcpServer2DefOptGrpStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.3
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2DefOptGrpId must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2ValidClassTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.16
A table containing valid user classes for DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2ValidClassEntry

hpnicfDhcpServer2ValidClassEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1
An entry containing valid user classes for DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2ValidClassEntry

hpnicfDhcpServer2ValidClassName		1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

hpnicfDhcpServer2ValidClassStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2RuleHwAddrTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17
A table for configuring hardware address rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2RuleHwAddrEntry

hpnicfDhcpServer2RuleHwAddrEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1
An entry for configuring hardware address rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2RuleHwAddrEntry

hpnicfDhcpServer2RuleHwAddrNumber		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.1
Rule number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

hpnicfDhcpServer2RuleHwAddress		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.2
Hardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..39)

hpnicfDhcpServer2RuleHwAddrMask		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.3
Mask of hardware address for a rule. The structure of the OCTET STRING is the same with hpnicfDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..39)

hpnicfDhcpServer2RuleHwAddrType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.4
Hardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

hpnicfDhcpServer2RuleHwAddrStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.5
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2RuleHwAddrAddress and hpnicfDhcpServer2RuleHwAddrMask must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2OptionGroupTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.18
A table for creating DHCP server option groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2OptionGroupEntry

hpnicfDhcpServer2OptionGroupEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1
An entry containing objects for creating or deleting an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2OptionGroupEntry

hpnicfDhcpServer2OptionGroupId		1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1.1
The option group ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..32768

hpnicfDhcpServer2OptionGroupStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpServer2OptionTable		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19
A table for configuring options in an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpServer2OptionEntry

hpnicfDhcpServer2OptionEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1
An entry containing objects for configuring an option in an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpServer2OptionEntry

hpnicfDhcpServer2OptionCode		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.1
Option code.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	2..254

hpnicfDhcpServer2OptionType		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.2
Option type. 'ascii' means using the ascii string that is defined by hpnicfDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by hpnicfDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by hpnicfDhcpServer2OptionIPStr to fill in the option.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ascii(1), hex(2), ip(3)

hpnicfDhcpServer2OptionAscii		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.3
Ascii string of an option. If hpnicfDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

hpnicfDhcpServer2OptionHexStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.4
Hex string of an option. The length of the string must be even. If hpnicfDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

hpnicfDhcpServer2OptionIPStr		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.5
IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hpnicfDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

hpnicfDhcpServer2OptionRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2OptionType must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpRelay2ScalarObjects		1.3.6.1.4.1.11.2.14.11.15.2.122.3
OBJECT IDENTIFIER

hpnicfDhcpRelay2ConfigGroup		1.3.6.1.4.1.11.2.14.11.15.2.122.3.1
OBJECT IDENTIFIER

hpnicfDhcpRelay2UserInfoRecord		1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.1
If the value is 'true', user information will be recorded.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpRelay2UserInfoRefresh		1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.2
If the value is 'true', user information will be refreshed on timer.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpRelay2UserInfoFlushTime		1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.3
User information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..120

hpnicfDhcpRelay2ReleaseAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.4
User address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfDhcpRelay2StatisticsGroup		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2
OBJECT IDENTIFIER

hpnicfDhcpRelay2RxClientNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.1
The total number of the packets received from DHCP clients by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2TxClientNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.2
The total number of the packets transmitted to DHCP clients by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2RxServerNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.3
The total number of the packets received from DHCP Servers by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2TxServerNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.4
The total number of the packets transmitted to DHCP Servers by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2BadNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.5
The total number of the bad packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2BootpRequestNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.6
The total number of the BOOTREQUEST packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2DiscoverNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.7
The total number of the DHCPDISCOVER packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2RequestNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.8
The total number of the DHCPREQUEST packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2DeclineNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.9
The total number of the DHCPDECLINE packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2ReleaseNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.10
The total number of the DHCPRELEASE packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2InformNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.11
The total number of the DHCPINFORM packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2BootpReplyNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.12
The total number of the BOOTREPLY packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2OfferNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.13
The total number of the DHCPOFFER packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2AckNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.14
The total number of the DHCPACK packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2NakNum		1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.15
The total number of the DHCPNAK packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hpnicfDhcpRelay2Tables		1.3.6.1.4.1.11.2.14.11.15.2.122.4
OBJECT IDENTIFIER

hpnicfDhcpRelay2IfConfigTable		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1
A table for configuring relay functions for interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpRelay2IfConfigEntry

hpnicfDhcpRelay2IfConfigEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1
An entry for configuring relay functions for an interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpRelay2IfConfigEntry

hpnicfDhcpRelay2IfSelectRelay		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.1
If the value is 'true', the DHCP relay function would be enabled on this interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpRelay2IfCheckMac		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.2
If the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpRelay2IfOpt82Enable		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.3
If DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfDhcpRelay2IfOpt82Strategy		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.4
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	drop(1), keep(2), replace(3)

hpnicfDhcpRelay2IfOpt82CIDMode		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.5
The mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hpnicfDhcpRelay2IfOpt82CIDStr must also be set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), verbose(2), userDefine(3)

hpnicfDhcpRelay2IfOpt82CIDNodeType		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.6
Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of hpnicfDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of hpnicfDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of hpnicfDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	invalid(1), mac(2), sysname(3), userDefine(4)

hpnicfDhcpRelay2IfOpt82CIDNodeStr		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.7
The string defined by user to fill in the node identifier in the verbose mode. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of hpnicfDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode and hpnicfDhcpRelay2IfOpt82CIDNodeType.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..50)

hpnicfDhcpRelay2IfOpt82CIDStr		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.8
The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0\|3..63)

hpnicfDhcpRelay2IfOpt82CIDFormat		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.9
The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hex(1), ascii(2), undefine(3)

hpnicfDhcpRelay2IfOpt82RIDMode		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.10
The mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hpnicfDhcpRelay2IfOpt82RIDStr must also be set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), sysname(2), userDefine(3)

hpnicfDhcpRelay2IfOpt82RIDStr		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.11
The string defined by user to fill in the remote ID in the user-defined mode. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82RIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..63)

hpnicfDhcpRelay2IfOpt82RIDFormat		1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.12
The format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82RIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hex(1), ascii(2)

hpnicfDhcpRelay2SrvAddrTable		1.3.6.1.4.1.11.2.14.11.15.2.122.4.2
A table for configuring a DHCP server address on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpRelay2SrvAddrEntry

hpnicfDhcpRelay2SrvAddrEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1
An entry for configuring a DHCP server address on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpRelay2SrvAddrEntry

hpnicfDhcpRelay2SrvAddrIP		1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1.1
Ip address of DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpRelay2SrvAddrRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1.2
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfDhcpRelay2UserInfoTable		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3
A table containing the user information of DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfDhcpRelay2UserInfoEntry

hpnicfDhcpRelay2UserInfoEntry		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1
An entry containing the user information of DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfDhcpRelay2UserInfoEntry

hpnicfDhcpRelay2UserInfoVpnIndex		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.1
VPN index of the DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..65534

hpnicfDhcpRelay2UserInfoIpAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.2
DHCP client's IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

hpnicfDhcpRelay2UserInfoMacAddr		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.3
DHCP client's MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

hpnicfDhcpRelay2UserInfoIfIndex		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.4
The index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

hpnicfDhcpRelay2UserInfoRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.5
Operation status of this table entry. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus