HPN-ICF-CATV-TRANSCEIVER-MIB

File: HPN-ICF-CATV-TRANSCEIVER-MIB.mib (6361 bytes)

Imported modules

HPN-ICF-OID-MIB SNMPv2-SMI

Imported symbols

hpnicfCommon Integer32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE

Defined Values

hpnicfCATVTransceiver 1.3.6.1.4.1.11.2.14.11.15.2.94
The objects in this MIB module are used to manage and display common configuration for CATV(Community Antenna Television) transceiver module.
MODULE-IDENTITY    

hpnicfCATVTransStatus 1.3.6.1.4.1.11.2.14.11.15.2.94.1
OBJECT IDENTIFIER    

hpnicfCATVTransStatusScalarObjects 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1
OBJECT IDENTIFIER    

hpnicfCATVTransState 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.1
The state of CATV transceiver.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hpnicfCATVTransInputPwr 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2
The input power of CATV transceiver. If transceiver is not on site, the value should be zero.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTransOutputLevel 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3
The output level of CATV transceiver. If transceiver is not on site, the value should be zero.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTransTemperature 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.4
The temperature of CATV transceiver. If transceiver is not on site, the value should be zero.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTransceiverMan 1.3.6.1.4.1.11.2.14.11.15.2.94.2
OBJECT IDENTIFIER    

hpnicfCATVTransCtrlScalarObjects 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1
OBJECT IDENTIFIER    

hpnicfCATVTransInputPwrLowerThr 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1
A threshold for the CATV transceiver's input power. When the input power of CATV transceiver is lower than threshold, a trap should be generated.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTransOutputLvlLowerThr 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2
A threshold for the CATV transceiver's output level. When the output level of CATV transceiver is lower than threshold, a trap should be generated.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTransTempratureUpperThr 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.3
A threshold for the CATV transceiver's temperature. When the temperature of CATV transceiver is higher than threshold, a trap should be generated.
OBJECT-TYPE    
  Integer32  

hpnicfCATVTansTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3
OBJECT IDENTIFIER    

hpnicfCATVTransTrapPrefix 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0
OBJECT IDENTIFIER    

hpnicfCATVTransInputPwrTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.1
A hpnicfCATVTransInputPwrTrap notification is sent when the input power of CATV transceiver is lower than the threshold.
NOTIFICATION-TYPE    

hpnicfCATVTransInputPwrReTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.2
A hpnicfCATVTransInputPwrReTrap notification is sent when the input power of CATV transceiver recovered from the last trap.
NOTIFICATION-TYPE    

hpnicfCATVTransOutputLvlTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.3
A hpnicfCATVTransOutputLvlTrap notification is sent when the output level of CATV transceiver is lower than the threshold.
NOTIFICATION-TYPE    

hpnicfCATVTransOutputLvlReTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.4
A hpnicfCATVTransOutputLvlReTrap notification is sent when the output level of CATV transceiver recovered from the last trap.
NOTIFICATION-TYPE    

hpnicfCATVTransTemperatureTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.5
A hpnicfCATVTransTemperatureTrap notification is sent when the temperature of CATV transceiver is higher than the threshold.
NOTIFICATION-TYPE    

hpnicfCATVTransTemperatureReTrap 1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.6
A hpnicfCATVTransTemperatureReTrap notification is sent when the temperature of CATV transceiver recovered from the last trap.
NOTIFICATION-TYPE