HPN-ICF-ARP-RATELIMIT-MIB

File: HPN-ICF-ARP-RATELIMIT-MIB.mib (5471 bytes)

Imported modules

HPN-ICF-OID-MIB SNMPv2-SMI IF-MIB

Imported symbols

hpnicfCommon Unsigned32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE ifIndex

Defined Types

HpnicfARPRatelimitConfigEntry  
SEQUENCE    
  hpnicfARPRatelimitValue Unsigned32

Defined Values

hpnicfARPRatelimit 1.3.6.1.4.1.11.2.14.11.15.2.110
This MIB file defines the ARP packet rate limit configuration. The ARP packet rate limit feature monitors and controls the rate of ARP packets delivered to the CPU on a device. The current version supports the monitoring feature only.
MODULE-IDENTITY    

hpnicfARPRatelimitObjects 1.3.6.1.4.1.11.2.14.11.15.2.110.1
OBJECT IDENTIFIER    

hpnicfARPRatelimitTrap 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1
OBJECT IDENTIFIER    

hpnicfARPRatelimitConfig 1.3.6.1.4.1.11.2.14.11.15.2.110.1.2
OBJECT IDENTIFIER    

hpnicfARPRatelimitTraps 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.0
OBJECT IDENTIFIER    

hpnicfARPRatelimitOverspeedTrap 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.0.1
If the rate of ARP packets delivered to the CPU on a device exceeds the threshold, a trap message is generated and sent to the remote monitoring device.
NOTIFICATION-TYPE    

hpnicfARPRatelimitTrapObjects 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1
OBJECT IDENTIFIER    

hpnicfARPRatelimitTrapVer 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.1
The version of trap information.
OBJECT-TYPE    
  Unsigned32  

hpnicfARPRatelimitTrapCount 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.2
Number of cells in the trap message. A trap message may contain multiple cells, each of which indicates that the rate information of ARP packets exceeds the threshold.
OBJECT-TYPE    
  Unsigned32  

hpnicfARPRatelimitTrapMsg 1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.3
This object is the cell section in a trap message sent from a monitored device. This object can contain multiple cells. This object is in the format of '...'. Each cell consists of 17 octets in the format of ''. indicates the source of the trap message and has size of 1 octet. It only supports the following values. 1 - Global. 2 - Interface. is the index of the interface where the rate of ARP packet exceeds the threshold and has size of 4 octets. It is 0xFFFFFFFF when is 1(Global). indicates the rate that ARP packets are actually delivered and has size of 4 octets. indicates the threshold that ARP packets can be delivered to CPU and has size of 4 octets. indicates the interval that a trap message is sent out and has size of 4 octets.
OBJECT-TYPE    
  OCTET STRING Size(1..254)  

hpnicfARPRatelimitConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.110.1.2.1
The table is used to configure ARP packet rate limit on interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfARPRatelimitConfigEntry

hpnicfARPRatelimitConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.110.1.2.1.1
The entry of hpnicfARPRatelimitConfigTable.
OBJECT-TYPE    
  HpnicfARPRatelimitConfigEntry  

hpnicfARPRatelimitValue 1.3.6.1.4.1.11.2.14.11.15.2.110.1.2.1.1.1
Configure ARP packet rate limit. Support for the value range depends on the device model. If the object is set to 0, the ARP packet rate limit will be disabled.
OBJECT-TYPE    
  Unsigned32