HPICF-AMP-SERVER-MIB

File: HPICF-AMP-SERVER-MIB.mib (10288 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF HP-ICF-OID
INET-ADDRESS-MIB SNMPv2-TC

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
OBJECT-GROUP MODULE-COMPLIANCE hpSwitch
InetAddress InetAddressType RowStatus
TEXTUAL-CONVENTION TruthValue

Defined Types

HpicfArubaVPNType  
This textual convention is an enum that contains the types of Aruba VPNs supported.
TEXTUAL-CONVENTION    
  INTEGER none(1), amp(2)  

HpicfArubaVPNEntry  
SEQUENCE    
  hpicfArubaVPNIndex HpicfArubaVPNType
  hpicfArubaVPNRowStatus RowStatus
  hpicfArubaVPNIPType InetAddressType
  hpicfArubaVPNIP InetAddress
  hpicfArubaVPNTos Integer32
  hpicfArubaVPNTtl Integer32

Defined Values

hpicfAMPServerMIB 1.3.6.1.4.1.11.2.14.11.5.1.125
This MIB defines HP proprietary objects used to configure the device with AirWave Management Platform (AMP).
MODULE-IDENTITY    

hpicfAMPServerObjects 1.3.6.1.4.1.11.2.14.11.5.1.125.1
OBJECT IDENTIFIER    

hpicfAMPServerConformance 1.3.6.1.4.1.11.2.14.11.5.1.125.2
OBJECT IDENTIFIER    

hpicfArubaVPNObjects 1.3.6.1.4.1.11.2.14.11.5.1.125.3
OBJECT IDENTIFIER    

hpicfArubaVPNDefaultGateway 1.3.6.1.4.1.11.2.14.11.5.1.125.4
OBJECT IDENTIFIER    

hpicfArubaVPNTable 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1
The Aruba VPN configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfArubaVPNEntry

hpicfArubaVPNEntry 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1
The Aruba VPN configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfArubaVPNEntry  

hpicfArubaVPNIndex 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.1
The index value which uniquely identifies a row in the configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfArubaVPNType  

hpicfArubaVPNRowStatus 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.2
The row status of this Aruba VPN configuration entry. Allows creation/deletion of the Controller configuration entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpicfArubaVPNIPType 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.3
IPv4 address type of Aruba VPN Peer IP.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

hpicfArubaVPNIP 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.4
IPv4 address of Aruba VPN Peer IP.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

hpicfArubaVPNTos 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.5
Configure Type-of-Service (ToS) for the tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpicfArubaVPNTtl 1.3.6.1.4.1.11.2.14.11.5.1.125.3.1.1.6
Configure Time-to-Live (TTL) for the tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpicfArubaVPNGateway 1.3.6.1.4.1.11.2.14.11.5.1.125.4.1
This object when set to TRUE will allow the Aruba controller to be reached through the default-gateway.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpicfAMPServerIPType 1.3.6.1.4.1.11.2.14.11.5.1.125.1.1
IP address type of AMP server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

hpicfAMPServerIP 1.3.6.1.4.1.11.2.14.11.5.1.125.1.2
IP address of AMP server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

hpicfAMPServerGroup 1.3.6.1.4.1.11.2.14.11.5.1.125.1.3
Group name in AMP server where the switch will be grouped into, after device registration.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hpicfAMPServerFolder 1.3.6.1.4.1.11.2.14.11.5.1.125.1.4
Folder name in AMP server where the switch will be configured into after device registration. Folder name string will be in colon separated values. Each value separated by colon will be a sub folder of previous value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

hpicfAMPServerSecret 1.3.6.1.4.1.11.2.14.11.5.1.125.1.5
Secret name for the registering group to verify the device by AMP server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hpicfAMPServerConfigStatus 1.3.6.1.4.1.11.2.14.11.5.1.125.1.6
The object is to show the AMP server configuration staus.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER configured(1), notConfigured(2)  

hpicfAMPServerMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.125.2.1
OBJECT IDENTIFIER    

hpicfAMPServerMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.125.2.2
OBJECT IDENTIFIER    

hpicfAMPServerMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.125.2.1.1
The compliance statement for HP switches implementing the HPICF-AMP-SERVER MIB.
Status: deprecated Access: read-write
MODULE-COMPLIANCE    

hpicfAMPServerMIBCompliance1 1.3.6.1.4.1.11.2.14.11.5.1.125.2.1.2
The compliance statement for HP switches implementing the HPICF-AMP-SERVER MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

hpicfAMPServerConfigGroup 1.3.6.1.4.1.11.2.14.11.5.1.125.2.2.1
A collection of objects to support the AMP server.
Status: current Access: read-write
OBJECT-GROUP    

hpicfArubaVPNConfigGroup 1.3.6.1.4.1.11.2.14.11.5.1.125.2.2.2
A collection of objects to support the Controller
Status: current Access: read-write
OBJECT-GROUP    

hpicfDefaultGatewayGroup 1.3.6.1.4.1.11.2.14.11.5.1.125.2.2.3
A collection of objects to support default gateway.
Status: current Access: read-write
OBJECT-GROUP