HP-UNIX

File: HP-UNIX.mib (36785 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
OBJECT-TYPE DisplayString

Defined Types

FileSystemEntry  
SEQUENCE    
  fileSystemID1 INTEGER
  fileSystemID2 INTEGER
  fileSystemName DisplayString
  fileSystemBlock INTEGER
  fileSystemBfree INTEGER
  fileSystemBavail INTEGER
  fileSystemBsize INTEGER
  fileSystemFiles INTEGER
  fileSystemFfree INTEGER
  fileSystemDir DisplayString

ProcessEntry  
SEQUENCE    
  processPID INTEGER
  processIdx INTEGER
  processUID INTEGER
  processPPID INTEGER
  processDsize Gauge
  processTsize Gauge
  processSsize Gauge
  processNice Gauge
  processMajor INTEGER
  processMinor INTEGER
  processPgrp INTEGER
  processPrio INTEGER
  processAddr INTEGER
  processCPU Gauge
  processUtime TimeTicks
  processStime TimeTicks
  processStart TimeTicks
  processFlags INTEGER
  processStatus INTEGER
  processWchan INTEGER
  processProcNum INTEGER
  processCmd DisplayString
  processTime INTEGER
  processCPUticks Counter
  processCPUticksTotal Counter
  processFss INTEGER
  processPctCPU Gauge
  processRssize Gauge
  processSUID INTEGER
  processUname DisplayString
  processTTY DisplayString

Ieee8023MacEntry  
SEQUENCE    
  ieee8023MacIndex INTEGER
  ieee8023MacTransmitted Counter
  ieee8023MacNotTransmitted Counter
  ieee8023MacDeferred Counter
  ieee8023MacCollisions Counter
  ieee8023MacSingleCollisions Counter
  ieee8023MacMultipleCollisions Counter
  ieee8023MacExcessCollisions Counter
  ieee8023MacLateCollisions Counter
  ieee8023MacCarrierLostErrors Counter
  ieee8023MacNoHeartBeatErrors Counter
  ieee8023MacFramesReceived Counter
  ieee8023MacUndeliverableFramesReceived Counter
  ieee8023MacCRCErrors Counter
  ieee8023MacAlignmentErrors Counter
  ieee8023MacResourceErrors Counter
  ieee8023MacControlFieldErrors Counter
  ieee8023MacUnknownProtocolErrors Counter
  ieee8023MacMulticastsAccepted Counter

IcmpEchoReqEntry  
SEQUENCE    
  icmpEchoReqTime INTEGER
  icmpEchoReqPktSize INTEGER
  icmpEchoReqTimeOut INTEGER
  icmpEchoReqHost IpAddress

TrapDestinationEntry  
SEQUENCE    
  trapDestination IpAddress

ClusterEntry  
SEQUENCE    
  clusterID INTEGER
  clusterMachineID OCTET STRING
  clusterType DisplayString
  clusterCnodeName DisplayString
  clusterSwapServingCnode INTEGER
  clusterKcsp INTEGER
  clusterCnodeAddress IpAddress

AuthFailEntry  
SEQUENCE    
  authIpAddress NetworkAddress
  authTime TimeTicks
  authCommunityName OCTET STRING

Defined Values

hp 1.3.6.1.4.1.11
OBJECT IDENTIFIER    

nm 1.3.6.1.4.1.11.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.11.2.3
OBJECT IDENTIFIER    

interface 1.3.6.1.4.1.11.2.4
OBJECT IDENTIFIER    

icmp 1.3.6.1.4.1.11.2.7
OBJECT IDENTIFIER    

snmp 1.3.6.1.4.1.11.2.13
OBJECT IDENTIFIER    

openView 1.3.6.1.4.1.11.2.17
OBJECT IDENTIFIER    

general 1.3.6.1.4.1.11.2.3.1
OBJECT IDENTIFIER    

hpux 1.3.6.1.4.1.11.2.3.2
OBJECT IDENTIFIER    

hpsun 1.3.6.1.4.1.11.2.3.10
OBJECT IDENTIFIER    

sparc 1.3.6.1.4.1.11.2.3.10.1
OBJECT IDENTIFIER    

computerSystem 1.3.6.1.4.1.11.2.3.1.1
OBJECT IDENTIFIER    

fileSystem 1.3.6.1.4.1.11.2.3.1.2
OBJECT IDENTIFIER    

processes 1.3.6.1.4.1.11.2.3.1.4
OBJECT IDENTIFIER    

cluster 1.3.6.1.4.1.11.2.3.1.5
OBJECT IDENTIFIER    

ieee8023Mac 1.3.6.1.4.1.11.2.4.1
OBJECT IDENTIFIER    

trap 1.3.6.1.4.1.11.2.13.1
OBJECT IDENTIFIER    

snmpdConf 1.3.6.1.4.1.11.2.13.2
OBJECT IDENTIFIER    

authfail 1.3.6.1.4.1.11.2.13.4
OBJECT IDENTIFIER    

openViewTrapVars 1.3.6.1.4.1.11.2.17.2
OBJECT IDENTIFIER    

hp386 1.3.6.1.4.1.11.2.3.8
OBJECT IDENTIFIER    

hp9000s300 1.3.6.1.4.1.11.2.3.2.2
OBJECT IDENTIFIER    

hp9000s800 1.3.6.1.4.1.11.2.3.2.3
OBJECT IDENTIFIER    

hp9000s700 1.3.6.1.4.1.11.2.3.2.5
OBJECT IDENTIFIER    

hpOpenView 1.3.6.1.4.1.11.2.17.1
OBJECT IDENTIFIER    

sun4 1.3.6.1.4.1.11.2.3.10.1.1
OBJECT IDENTIFIER    

sun5 1.3.6.1.4.1.11.2.3.10.1.2
OBJECT IDENTIFIER    

computerSystemUpTime 1.3.6.1.4.1.11.2.3.1.1.1
Time since the last boot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

computerSystemUsers 1.3.6.1.4.1.11.2.3.1.1.2
Number of users logged on to system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemAvgJobs1 1.3.6.1.4.1.11.2.3.1.1.3
Average number of jobs in the last 1 minute * 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemAvgJobs5 1.3.6.1.4.1.11.2.3.1.1.4
Average number of jobs in the last 5 minutes * 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemAvgJobs15 1.3.6.1.4.1.11.2.3.1.1.5
Average number of jobs in the last 15 minutes * 100.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemMaxProc 1.3.6.1.4.1.11.2.3.1.1.6
Maximum number of processes allowed in system. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

computerSystemFreeMemory 1.3.6.1.4.1.11.2.3.1.1.7
Free memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemPhysMemory 1.3.6.1.4.1.11.2.3.1.1.8
Physical memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

computerSystemMaxUserMem 1.3.6.1.4.1.11.2.3.1.1.9
Maximum user memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemSwapConfig 1.3.6.1.4.1.11.2.3.1.1.10
Swap space configured. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

computerSystemEnabledSwap 1.3.6.1.4.1.11.2.3.1.1.11
Enabled via swapon. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemFreeSwap 1.3.6.1.4.1.11.2.3.1.1.12
Currently free swap space. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

computerSystemUserCPU 1.3.6.1.4.1.11.2.3.1.1.13
CPU used by users. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

computerSystemSysCPU 1.3.6.1.4.1.11.2.3.1.1.14
CPU used by system. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

computerSystemIdleCPU 1.3.6.1.4.1.11.2.3.1.1.15
CPU idle. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

computerSystemNiceCPU 1.3.6.1.4.1.11.2.3.1.1.16
CPU nice. SunOS - not implemented. Implemented with Extensible SNMP Agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

fileSystemMounted 1.3.6.1.4.1.11.2.3.1.2.1
The number of file systems mounted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

fileSystemTable 1.3.6.1.4.1.11.2.3.1.2.2
File system table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FileSystemEntry

fileSystemEntry 1.3.6.1.4.1.11.2.3.1.2.2.1
Each entry contains objects for a particular file system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FileSystemEntry  

fileSystemID1 1.3.6.1.4.1.11.2.3.1.2.2.1.1
First file system ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

fileSystemID2 1.3.6.1.4.1.11.2.3.1.2.2.1.2
Second file system ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

fileSystemName 1.3.6.1.4.1.11.2.3.1.2.2.1.3
Name of mounted file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fileSystemBlock 1.3.6.1.4.1.11.2.3.1.2.2.1.4
Total blocks in file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemBfree 1.3.6.1.4.1.11.2.3.1.2.2.1.5
Free blocks in file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemBavail 1.3.6.1.4.1.11.2.3.1.2.2.1.6
Free blocks avail to non-superuser.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemBsize 1.3.6.1.4.1.11.2.3.1.2.2.1.7
Fundamental file system block size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemFiles 1.3.6.1.4.1.11.2.3.1.2.2.1.8
Total file nodes in file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemFfree 1.3.6.1.4.1.11.2.3.1.2.2.1.9
Free file nodes in file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileSystemDir 1.3.6.1.4.1.11.2.3.1.2.2.1.10
File system path prefix.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

processNum 1.3.6.1.4.1.11.2.3.1.4.1
The number of processes running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processTable 1.3.6.1.4.1.11.2.3.1.4.2
Processes Table. Implemented with Extensible SNMP Agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProcessEntry

processEntry 1.3.6.1.4.1.11.2.3.1.4.2.1
Each entry contains information about a process running on the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ProcessEntry  

processPID 1.3.6.1.4.1.11.2.3.1.4.2.1.1
The process ID (pid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processIdx 1.3.6.1.4.1.11.2.3.1.4.2.1.2
Index for pstat() requests. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processUID 1.3.6.1.4.1.11.2.3.1.4.2.1.3
Process User ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processPPID 1.3.6.1.4.1.11.2.3.1.4.2.1.4
Parent process ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processDsize 1.3.6.1.4.1.11.2.3.1.4.2.1.5
Process data size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processTsize 1.3.6.1.4.1.11.2.3.1.4.2.1.6
Process text size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processSsize 1.3.6.1.4.1.11.2.3.1.4.2.1.7
Process stack size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processNice 1.3.6.1.4.1.11.2.3.1.4.2.1.8
Process nice value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processMajor 1.3.6.1.4.1.11.2.3.1.4.2.1.9
Process tty major number. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processMinor 1.3.6.1.4.1.11.2.3.1.4.2.1.10
Process tty minor number. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processPgrp 1.3.6.1.4.1.11.2.3.1.4.2.1.11
Process group of this process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processPrio 1.3.6.1.4.1.11.2.3.1.4.2.1.12
Process priority.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processAddr 1.3.6.1.4.1.11.2.3.1.4.2.1.13
Address of process (in memory).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processCPU 1.3.6.1.4.1.11.2.3.1.4.2.1.14
Processor utilization for scheduling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processUtime 1.3.6.1.4.1.11.2.3.1.4.2.1.15
User time spent executing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

processStime 1.3.6.1.4.1.11.2.3.1.4.2.1.16
System time spent executing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

processStart 1.3.6.1.4.1.11.2.3.1.4.2.1.17
Time Process started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

processFlags 1.3.6.1.4.1.11.2.3.1.4.2.1.18
Flags associated with process. SunOS - values found in /usr/include/sys/proc.h.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incore(1), sys(2), locked(4), trace(8), trace2(16)  

processStatus 1.3.6.1.4.1.11.2.3.1.4.2.1.19
The process status. SunOS - sleep(1), wait(2), run(3), idle (4), zombie(5), stop(6)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sleep(1), run(2), stop(3), zombie(4), other(5), idle(6)  

processWchan 1.3.6.1.4.1.11.2.3.1.4.2.1.20
If processStatus is sleep, value sleeping on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processProcNum 1.3.6.1.4.1.11.2.3.1.4.2.1.21
Processor this process last run on. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processCmd 1.3.6.1.4.1.11.2.3.1.4.2.1.22
Command the process is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

processTime 1.3.6.1.4.1.11.2.3.1.4.2.1.23
Resident time for scheduling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processCPUticks 1.3.6.1.4.1.11.2.3.1.4.2.1.24
Ticks of cpu time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

processCPUticksTotal 1.3.6.1.4.1.11.2.3.1.4.2.1.25
Total ticks for life of process. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

processFss 1.3.6.1.4.1.11.2.3.1.4.2.1.26
Fair Share Schedular Group. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processPctCPU 1.3.6.1.4.1.11.2.3.1.4.2.1.27
Percent CPU * 100 for this process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processRssize 1.3.6.1.4.1.11.2.3.1.4.2.1.28
Resident Set Size for process (private pages).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

processSUID 1.3.6.1.4.1.11.2.3.1.4.2.1.29
saved UID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processUname 1.3.6.1.4.1.11.2.3.1.4.2.1.30
User name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

processTTY 1.3.6.1.4.1.11.2.3.1.4.2.1.31
Process TTY. SunOS - not implemented.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ieee8023MacTable 1.3.6.1.4.1.11.2.4.1.1
A list of IEEE 802.3 Interface entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8023MacEntry

ieee8023MacEntry 1.3.6.1.4.1.11.2.4.1.1.1
Each entry contains statistics for ieee 802.3 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ieee8023MacEntry  

ieee8023MacIndex 1.3.6.1.4.1.11.2.4.1.1.1.1
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ieee8023MacTransmitted 1.3.6.1.4.1.11.2.4.1.1.1.2
The number of frames successfully transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacNotTransmitted 1.3.6.1.4.1.11.2.4.1.1.1.3
The number of frames not transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacDeferred 1.3.6.1.4.1.11.2.4.1.1.1.4
The number of frames deferred because the medium was busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacCollisions 1.3.6.1.4.1.11.2.4.1.1.1.5
Total number of transmit attempts that were retransmitted due to collisions. SunOS with Intel 82586 Ethernet driver - total number of collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacSingleCollisions 1.3.6.1.4.1.11.2.4.1.1.1.6
Number of transmit attempts that are involved in a single collision and are subsequently transmitted successfully. SunOS - this is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacMultipleCollisions 1.3.6.1.4.1.11.2.4.1.1.1.7
Number of transmit attempts that are involved in between 2 and 15 collision attempts and are subsequently transmitted successfully. SunOS with Intel 82586 is always 0. SunOS with AMD 7990 LANCE driver - number of transmit attempts that are involved in between 1 and 15 collision attempts and are subsequently transmitted successfully.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacExcessCollisions 1.3.6.1.4.1.11.2.4.1.1.1.8
Number of transmit attempts that are involved in more than 15 collision attempts and are subsequently transmitted successfully. SunOS with Intel 82586 Ethernet driver - this is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacLateCollisions 1.3.6.1.4.1.11.2.4.1.1.1.9
Number of transmit attempts aborted because a collision occurred after the allotted channel time had elapsed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacCarrierLostErrors 1.3.6.1.4.1.11.2.4.1.1.1.10
Number of times that carrier sense was lost when attempting to transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacNoHeartBeatErrors 1.3.6.1.4.1.11.2.4.1.1.1.11
Number of times no heart beat was indicated after a transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacFramesReceived 1.3.6.1.4.1.11.2.4.1.1.1.12
Number of frames successfully received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacUndeliverableFramesReceived 1.3.6.1.4.1.11.2.4.1.1.1.13
Number of frames received that were not delivered because the software buffer was overrun when frames were sent faster than they could be received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacCRCErrors 1.3.6.1.4.1.11.2.4.1.1.1.14
Number of Cyclical Redundancy Check (CRC) errors detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacAlignmentErrors 1.3.6.1.4.1.11.2.4.1.1.1.15
Number of frames received that were both misaligned and had bad CRC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacResourceErrors 1.3.6.1.4.1.11.2.4.1.1.1.16
Number of frames received that were lost due to lack of resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacControlFieldErrors 1.3.6.1.4.1.11.2.4.1.1.1.17
Number of frames received with errors in the control field. SunOS - this is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacUnknownProtocolErrors 1.3.6.1.4.1.11.2.4.1.1.1.18
Number of frames dropped because the type field or sap field referenced an invalid protocol. SunOS - this is always 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ieee8023MacMulticastsAccepted 1.3.6.1.4.1.11.2.4.1.1.1.19
Number of accepted muliticast addresses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

icmpEchoReq 1.3.6.1.4.1.11.2.7.1
The number of milliseconds it takes for an ICMP echo request to respond. IcmpEchoReq is -1 if there is an internal error, -2 if the echo request timed out, -3 if the echo reply is not the correct reply, -4 if the packet size is too large, and -5 if the timeout is invalid. To request the ICMP response time for IP address a1.a2.a3.a4 with a timeout of t and a packet size of s, send a request for icmpEchoReq.s.t.a1.a2.a3.a4. For example, suppose one wanted to find out the number of milliseconds it took to ping 15.2.112.113, with time out of 8 seconds, and packet size of 75. Accordingly, icmpEchoReq.75.8.15.2.112.113 would identify the number of milliseconds. This MIB object is there only to provide for backward compatibility. A new MIB object is provided which does not violate the SNMP standards too, 'icmp.icmpEchoReqTable.icmpEchoReqEntry.icmpEchoReqTime'. This new MIB object is recommended to be used to achieve the same funtionality as provided by this (icmp.icmpEchoReq) MIB object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

icmpEchoReqTable 1.3.6.1.4.1.11.2.7.2
A conceptual table holding the ICMP response times for various remote hosts. The table is a conceptual one in the sense that, the table actually contains no data. When a query for the table object icmpEchoReqTime is received by the agent an ICMP echo request is sent to the remote host, the ICMP echo reply is received, the elapsed time is calculated and is sent back as the response. Note that except the columnar object icmpEchoReqTime other objects in the table, viz., icmpEchoReqPktSize, icmpEchoReqTimeout and icmpEchoReqHost, have ACCESS previlege as not-accessible, those variables cannot be queried for. The table entries have the objects icmpEchoReqPktSize, icmpEchoReqTimeout and icmpEchoReqHost as the indices, which is effectively a way of transfering these required details to the agent, so that the agent could do its function and respond appropriately.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IcmpEchoReqEntry

icmpEchoReqEntry 1.3.6.1.4.1.11.2.7.2.1
Each entry in the table icmpEchoReqTable is a conceptual one. See description of icmpEchoReqTable for more details.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IcmpEchoReqEntry  

icmpEchoReqTime 1.3.6.1.4.1.11.2.7.2.1.1
The elapsed time between the time the ICMP echo request is sent to the host identified by the index object icmpEchoReqHost and the time the ICMP echo reply is received at the agent host. The ICMP packet size and the time out to be used for the ICMP echo request are identified by the indices icmpEchoReqPktSize and icmpEchoReqTimeOut. See description of icmpEchoReqTable for more details. In other words, the number of milliseconds it takes for an ICMP echo request to respond. Other return values: -1 if there is an internal error, -2 if the echo request timed out, -3 if the echo reply is not the correct reply, -4 if the packet size is too large, and -5 if the timeout is invalid. To request the ICMP response time for IP address a1.a2.a3.a4 with a timeout of t and a packet size of s, send a request for icmpEchoReqTime.s.t.a1.a2.a3.a4. For example, suppose one wanted to find out the number of milliseconds it took to ping 15.2.112.113, with time out of 8 seconds, and packet size of 75. Accordingly, icmpEchoReqTime.75.8.15.2.112.113 would identify the number of milliseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

icmpEchoReqPktSize 1.3.6.1.4.1.11.2.7.2.1.2
The packet size to be used for the ICMP echo request, see description of icmpEchoReqTable for more details. The object serves as the first index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

icmpEchoReqTimeOut 1.3.6.1.4.1.11.2.7.2.1.3
The time period in seconds to wait for an ICMP echo reply message after an ICMP echo request is sent to the identified host, see description of icmpEchoReqTable for more details. The object serves as the second index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

icmpEchoReqHost 1.3.6.1.4.1.11.2.7.2.1.4
The host to which the ICMP echo request is to be sent, the ping time between the host identified by this index object and the agent's host is what is queried for, see description of icmpEchoReqTable for more details. The object serves as the last index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

trapDestinationNum 1.3.6.1.4.1.11.2.13.1.1
The number of trap destinations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

trapDestinationTable 1.3.6.1.4.1.11.2.13.1.2
List of addresses to which the agent sends traps.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapDestinationEntry

trapDestinationEntry 1.3.6.1.4.1.11.2.13.1.2.1
Each entry contains the address of a management station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrapDestinationEntry  

trapDestination 1.3.6.1.4.1.11.2.13.1.2.1.1
Address to which the agent sends traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpdConfRespond 1.3.6.1.4.1.11.2.13.2.1
The SNMP agent was configured to respond to all objects if snmpdConfRespond is true. HP-Internal use only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

snmpdReConfigure 1.3.6.1.4.1.11.2.13.2.2
The agent will re-configure itself if snmpdReConfigure is set to reset(1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

snmpdFlag 1.3.6.1.4.1.11.2.13.2.3
Indicates the capability of the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER removetrap(1), netwareproxy(2)  

snmpdLogMask 1.3.6.1.4.1.11.2.13.2.4
The agent's log mask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snmpdVersion 1.3.6.1.4.1.11.2.13.2.5
The agent's version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpdStatus 1.3.6.1.4.1.11.2.13.2.6
Indicates the status of the agent. Setting the agent to down will kill it.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

snmpdSize 1.3.6.1.4.1.11.2.13.2.7
The amount of memory the agent has allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snmpdWhatString 1.3.6.1.4.1.11.2.13.2.9
The what string of the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isClustered 1.3.6.1.4.1.11.2.3.1.5.1
Describes whether machine is clustered or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER standalone(1), rootserver(2), cnode(3)  

clusterTable 1.3.6.1.4.1.11.2.3.1.5.2
List of nodes on the cluster.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterEntry

clusterEntry 1.3.6.1.4.1.11.2.3.1.5.2.1
Each entry contains information about the clustered node.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClusterEntry  

clusterID 1.3.6.1.4.1.11.2.3.1.5.2.1.1
The cnode id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterMachineID 1.3.6.1.4.1.11.2.3.1.5.2.1.2
The cnode machine id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clusterType 1.3.6.1.4.1.11.2.3.1.5.2.1.3
The cnode type (r or c).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterCnodeName 1.3.6.1.4.1.11.2.3.1.5.2.1.4
The cnode name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterSwapServingCnode 1.3.6.1.4.1.11.2.3.1.5.2.1.5
The swap serving cnode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterKcsp 1.3.6.1.4.1.11.2.3.1.5.2.1.6
KCSP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterCnodeAddress 1.3.6.1.4.1.11.2.3.1.5.2.1.7
The cnode IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

clusterCnodeID 1.3.6.1.4.1.11.2.3.1.5.3
The machine's cnodes id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

authFailTable 1.3.6.1.4.1.11.2.13.4.1
List of managers that caused an authentication failure. This list has a maximum size.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AuthFailEntry

authFailEntry 1.3.6.1.4.1.11.2.13.4.1.1
Each entry contains the ip address of the management station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AuthFailEntry  

authIpAddress 1.3.6.1.4.1.11.2.13.4.1.1.1
The ip address of the management station that sent a request to the agent with an incorrect community name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NetworkAddress  

authTime 1.3.6.1.4.1.11.2.13.4.1.1.2
The time since the agent received the un-authenticated request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

authCommunityName 1.3.6.1.4.1.11.2.13.4.1.1.3
The community name used in the request
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

openViewSourceId 1.3.6.1.4.1.11.2.17.2.1
The identifier of the software generating the trap/event. This number is used by HP OpenView software when it sends an event to the OpenView event system. It identifies which software component sent the event. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

openViewSourceName 1.3.6.1.4.1.11.2.17.2.2
The source of the event (may not be the machine upon which the event was generated). This string is used by HP OpenView software when it sends an event. It identifies for which source (node) the event is generated. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewObjectId 1.3.6.1.4.1.11.2.17.2.3
The OpenView object identifier associated with the source of the trap/event. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewData 1.3.6.1.4.1.11.2.17.2.4
Any miscellaneous data sent with an OpenView trap/event. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewSeverity 1.3.6.1.4.1.11.2.17.2.5
The OpenView event severity associated with the trap/event. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewCategory 1.3.6.1.4.1.11.2.17.2.6
The OpenView event category associated with the trap/event. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewFilter 1.3.6.1.4.1.11.2.17.2.7
The event filter for an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewEntity 1.3.6.1.4.1.11.2.17.2.8
The entity (string name) of an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewAddress 1.3.6.1.4.1.11.2.17.2.9
The IP address of the node from where an application is connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

openViewPid 1.3.6.1.4.1.11.2.17.2.10
The process ID of an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING