HP-SYSTEM-MIB
File:
HP-SYSTEM-MIB.mib (19193 bytes)
Imported modules
Imported symbols
Defined Types
| HpFanStatusEntry |
|
| SEQUENCE |
|
|
|
| |
hpFanNumber |
INTEGER |
|
| |
hpFanOperational |
INTEGER |
|
| |
hpFanSpeed |
Integer32 |
|
Defined Values
| hpProcurveSystem |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1 |
| This MIB module describes objects for basic
management of devices in the HP Procurve
product line. |
| MODULE-IDENTITY |
|
|
|
| hpConfig |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1 |
| OBJECT IDENTIFIER |
|
|
|
| hpStatus |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| hpProductDescription |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.1 |
| Textual Description of the HW product |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpProductHWVersion |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.2 |
| HW version of the product |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpProductSWVersion |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.3 |
| SW version of the product |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpProductSerialNumber |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.4 |
| Serial Number of the product |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpProductLastChange |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.5 |
| Date and time of last configuration change |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpCpuTemperature |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 |
| Current temperature in degrees centigrade
of the CPU. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpPowerSupplyTemperature |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 |
| Current temperature in degrees centigrade
of the power supply. |
| Status: deprecated |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpChassisTemperature |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 |
| Current temperature in degrees centigrade
of the mother board. Note: this is not the
ambient temperature of the box. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hpFanStatusTable |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9 |
| Table of operational status of all internal
cooling fans. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
HpFanStatusEntry |
|
| hpFanStatusEntry |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1 |
| Entry in table of all internal cooling fans. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
HpFanStatusEntry |
|
|
| hpFanNumber |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.1 |
| Identifier of cooling fan, numbered to represent what
hardware the fan is supposed to be cooling. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
cpu(1), power(2) |
|
| hpFanOperational |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.2 |
| Operational status of a cooling fan. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| hpFanSpeed |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.3 |
| Speed of the fan in RPM. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hpName |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.2 |
| A textual string containing information about the
device. For instance, this string reflects the setting of
the HP J8162A XL Access Controller Module Name available on the Administrative
Web based User Interface. If no HP J8162A XL Access Controller Module name
is entered, this object contains a zero-length string. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| hpSystemID |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.3 |
| The unique identifier for this device, as used by
this system, or a master controlling system. For instance, an
HP J8162A XL Access Controller Module would report the systemID used by the
Access Control Server 740wl to uniquely identify this device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..64) |
|
| hpState |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.4 |
| The current state of the device. A HP ProCurve Networking Business
device can be configured for standalone operation,
Failover (ie with a redundant peer), or for Distribution
of configuration from a controlling central system to
remote entities.
unknown(1) - system Configuration status unknown
up(2) - a standalone system is operational.
down(3) - a system is not operational.
primary(4) - system is running as the primary in
a Failover peer configuration.
secondary(5) - system is running as the backup in
a Failover peer configuration. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), up(2), down(3), primary(4), secondary(5) |
|
| hpDistributionType |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.5 |
| The most recent distribution event type on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event type
none(2) - no distribution event has occurred
rightsPush(3) - the central Access Control Server 740wl
has triggered a rights push event to remote Access Control Server
740wls. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), rightsPush(2) |
|
| hpDistributionStatus |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.6 |
| The most recent distribution event on a device.
This object will change dynamically based on
the most recently triggered distribution event.
unknown(1) - the distribution event status unknown
succeeded(2) - no distribution event has succeeded
failed(3) - the distribution event failed for some reason. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
unknown(1), succeeded(2), failed(3) |
|
| hpIpAddress |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.7 |
| The administratively assigned IP address associated with the
device. This can be assigned statically on the
device Console port, or configured via DHCP. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| hpPeerIpAddress |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.8 |
| The administratively assigned IP address associated with a
redundant peer device, configured to work with this device
for failover purposes. This can be assigned statically on the
device Console port, or configured via DHCP. If the device
does not support Failover configuration, or none has been
configured, this object will report 0.0.0.0 |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| hpTechSupportEnabled |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.9 |
| This object contains the current setting for the technical
support access to the device. A value of true(1)
indicates the Technical Support Access has been enabled. A value
of false(2) indicates this access has been disabled. Note
this object should only report true(2) if HP ProCurve Networking
Business Technical Support staff have requested this access
to the HP J8162A XL Access Controller Module for troubleshooting purposes. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| hpFailedAdminIpAddress |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.10 |
| The IP address associated with the last failed
authentication to the Administrative UI. If no Administrator
had failed authentication, this object will report 0.0.0.0 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| hpNumAccessControllers |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.1 |
| The number of HP J8162A XL Access Controller Modules known to this system.
If this system is an HP J8162A XL Access Controller Module, this value will be 1.
Otherwise, this value will be the number of HP J8162A XL Access Controller Modules
this system is connected to (i.e. An Access Control Server 740wl
connects to multiple HP J8162A XL Access Controller Module's). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| hpNumClients |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.2 |
| The total number of active authenticated or unauthenticated
clients known to this system. If this device is an
HP J8162A XL Access Controller Module, then this object reports
the aggregated number of clients across all ports. If this device
is a Access Control Server 740wl, it reports all Clients aggregated
across all HP J8162A XL Access Controller Modules known to this system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| hpFailoverNotificationEnabled |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 |
| This object controls whether a hpFailover notification will
be sent in the event of a failover occurrence between a primary
and standby system. By default this object is set to false(2)
for all systems. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| hpDistributionNotificationEnabled |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.2 |
| This object controls whether a hpDistribution notification will
be sent in the event of a distribution event between a central
and remote systems. By default this object is set to false(2)
for all systems. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| hpAdminAuthFailureNotificationEnabled |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.3 |
| This object controls whether a hpAdminAuthFailure
notification will be sent in the event of a failed
authentication attempt at the administrator login. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| hpSystemTraps |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0 |
| OBJECT IDENTIFIER |
|
|
|
| fanDown |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1 |
| A fanDown trap signifies that hpFanOperational has
detected an event where the fan is not operating. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| fanUp |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2 |
| A fanUp trap signifies that hpFanOperational has
detected an event where the fan is now operating. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| temperatureAlarm |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3 |
| A temperatureAlarm signifies that the SNMP
entity, acting in an agent role, has detected that the
hpCpuTemperature has a value that exceeds acceptable
tolerances (i.e. it is too hot or too cold). |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| hpFailover |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4 |
| A hpFailover signifies that the SNMP
entity, acting in an agent role, has detected that the
standby system in a primary, redundant operation has
become the primary system. This notification will only
be sent by what was formerly the standby system. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| hpDistributionEvent |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5 |
| A hpDistributionEvent signifies that the SNMP
entity, acting in an agent role, has detected that the
central entity in a distributed system has triggered a
distribution event of hpDistributionType. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| hpAdminAuthFailure |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6 |
| A hpAdminAuthFailure signifies that the SNMP
entity, acting in an agent role, has detected that
someone at the address reported by hpAdminIpAddress
has failed to authenticate to the device via
the administrative interface. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| hpCompliances |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1 |
| OBJECT IDENTIFIER |
|
|
|
| hpGroups |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2 |
| OBJECT IDENTIFIER |
|
|
|
| hpSystemMIBCompliance1 |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1.1 |
| The compliance statement for entities which implement
the HP-SYSTEM-MIB. |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| hpSystemGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.1 |
| A collection of objects providing system information
applicable to all devices. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| hpEnvGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.2 |
| A collection of objects providing environmental information
applicable to all devices. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| hpConfigGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.3 |
| A collection of objects providing configuration information
applicable to all devices. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| hpStatusGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.4 |
| A collection of objects providing statistics
applicable to all HP J8162A XL Access Controller Module like devices. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| hpNotificationsConfigGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.5 |
| A collection of objects providing notification configuration
information applicable to all devices. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| hpNotificationsGroup |
1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.6 |
| notifications for primary failover, and authorization failures,
applicable to all devices. |
| Status: current |
Access: read-only |
| NOTIFICATION-GROUP |
|
|
|