HP-ICF-USER-PROFILE-MIB

File: HP-ICF-USER-PROFILE-MIB.mib (45677 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB HP-ICF-OID Q-BRIDGE-MIB

Imported symbols

TimeTicks Integer32 Unsigned32
OBJECT-TYPE MODULE-IDENTITY Counter64
RowStatus TruthValue MacAddress
MODULE-COMPLIANCE OBJECT-GROUP InterfaceIndex
hpicfCommonSecurity VlanIndex

Defined Types

HpicfUsrProfileConfigFilterListEntry  
SEQUENCE    
  hpicfUsrProfileFilterListIndex Integer32
  hpicfUsrProfileConfigFilterListRowStatus RowStatus
  hpicfUsrProfileConfigNasRulesIpv6 INTEGER

HpicfUsrProfileConfigFilterRuleEntry  
SEQUENCE    
  hpicfUsrProfileFilterRuleListIndex Integer32
  hpicfUsrProfileFilterRuleIndex Integer32
  hpicfUsrProfileConfigFilterRule STRING
  hpicfUsrProfileConfigFilterRuleRowStatus RowStatus

HpicfUsrProfileConfigEntry  
SEQUENCE    
  hpicfUsrProfileConfigIndex Integer32
  hpicfUsrProfileConfigPvid VlanIndex
  hpicfUsrProfileConfigPvidEnable TruthValue
  hpicfUsrProfileConfigTaggedEgressVlanMap1k STRING
  hpicfUsrProfileConfigTaggedEgressVlanMap2k STRING
  hpicfUsrProfileConfigTaggedEgressVlanMap3k STRING
  hpicfUsrProfileConfigTaggedEgressVlanMap4k STRING
  hpicfUsrProfileConfigTaggedEgressVlanEnable TruthValue
  hpicfUsrProfileConfigIngressVlanFilterEnable TruthValue
  hpicfUsrProfileConfigPriorityRegenTable STRING
  hpicfUsrProfileConfigPriorityRegenTableEnable TruthValue
  hpicfUsrProfileConfigMaxIngressBandwidth Unsigned32
  hpicfUsrProfileConfigMaxIngressBandwidthEnable TruthValue
  hpicfUsrProfileConfigMaxEgressBandwidth Unsigned32
  hpicfUsrProfileConfigMaxEgressBandwidthEnable TruthValue
  hpicfUsrProfileConfigFilterListIndex Integer32
  hpicfUsrProfileConfigFilterListEnable TruthValue
  hpicfUsrProfileConfigEntryRowStatus RowStatus

HpicfUsrProfileConfigBindEntry  
SEQUENCE    
  hpicfUsrProfileUserPortNumber InterfaceIndex
  hpicfUsrProfileUserMacAddr MacAddress
  hpicfUsrProfileSelector Integer32
  hpicfUsrProfileConfigBindEntryRowStatus RowStatus

HpicfUsrProfileStatsFilterEntry  
SEQUENCE    
  hpicfUsrProfileStatsFilterRule STRING
  hpicfUsrProfileStatsFilterRuleHitCount Counter64
  hpicfUsrProfileStatsFilterRuleHitCountEnabled TruthValue

HpicfUsrProfileStatsEntry  
SEQUENCE    
  hpicfUsrProfileStatsPvid VlanIndex
  hpicfUsrProfileStatsTaggedEgressVlanMap1k STRING
  hpicfUsrProfileStatsTaggedEgressVlanMap2k STRING
  hpicfUsrProfileStatsTaggedEgressVlanMap3k STRING
  hpicfUsrProfileStatsTaggedEgressVlanMap4k STRING
  hpicfUsrProfileStatsIngressVlanFilterEnable TruthValue
  hpicfUsrProfileStatsPriorityRegenTable STRING
  hpicfUsrProfileStatsMaxIngressBandwidth Unsigned32
  hpicfUsrProfileStatsMaxEgressBandwidth Unsigned32
  hpicfUsrProfileStatsFilterListIndex Integer32
  hpicfUsrProfileStatsAccessMode INTEGER

Defined Values

hpicfUsrProfileMIB 1.3.6.1.4.1.11.2.14.11.1.12.1
This MIB module contains the definitions of Managed Objects for user access profiles.
MODULE-IDENTITY    

hpicfUsrProfileCapability 1.3.6.1.4.1.11.2.14.11.1.12.1.0
OBJECT IDENTIFIER    

hpicfUsrProfileConfig 1.3.6.1.4.1.11.2.14.11.1.12.1.1
OBJECT IDENTIFIER    

hpicfUsrProfileStats 1.3.6.1.4.1.11.2.14.11.1.12.1.2
OBJECT IDENTIFIER    

hpicfUsrProfileConformance 1.3.6.1.4.1.11.2.14.11.1.12.1.3
OBJECT IDENTIFIER    

hpicfUsrProfileCapabilityByPortMap 1.3.6.1.4.1.11.2.14.11.1.12.1.0.1
A string of octets containing on bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingress VLAN Filter bit 3 - Priority Regeneration bit 4 - Max. Ingress Bandwidth bit 5 - Max. Egress Bandwidth bit 6 - Filter List bit 7 - Hitcount Support bit 8 - through 64 - reserved When a bit is set to one, it indicates that device supports the selected access profile primitive only on a per port ('hpicfUsrProfileUserPortNumber') basis. The consequence is that the device can only enforce the same access primitive setting for all users ('hpicfUsrProfileUserMacAddr') on a given port.
OBJECT-TYPE    
  STRING Size(8)  

hpicfUsrProfileCapabilityByUserMap 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2
A string of octets containing one bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingress VLAN Filter bit 3 - Priority Regeneration bit 4 - Max. Ingress Bandwidth bit 5 - Max. Egress Bandwidth bit 6 - Filter List bit 7 - Hitcount Support bit 8 - through 64 - reserved When a bit is set to one, it indicates that device supports the selected access profile primitive on a per 'hpicfUsrProfileUserMacAddr' basis. The consequence is that the device can enforce unique per user access profile primitives for each user on a given port ('hpicfUsrProfileUserPortNumber').
OBJECT-TYPE    
  STRING Size(8)  

hpicfUsrProfileConfigFilterListTable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1
A table that contains configuration objects for filter lists.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileConfigFilterListEntry

hpicfUsrProfileConfigFilterListEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1
The configuration information for a user's filtering profile.
OBJECT-TYPE    
  HpicfUsrProfileConfigFilterListEntry  

hpicfUsrProfileFilterListIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.1
The identifier used to select a list of filter rules. A filter list entry must be created before a filter rule entry can be added.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileConfigFilterListRowStatus 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.2
This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry that is indexed on this entry's hpicfUsrProfileListIndex. This object must be in the notReady or notInService states in order for an hpicfUsrProfileConfigFilterRuleEntry to be added, removed, or modified. In order to be changed to an active rowStatus, at least one rule sharing the list index must have an active hpicfUsrProfileConfigFilterRuleRowStatus.
OBJECT-TYPE    
  RowStatus  

hpicfUsrProfileConfigNasRulesIpv6 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.3
Setting this attribute to enabled(1) enables the usage of IPv6 destinations in ACEs. When set to disabled(2) any implicit IP destinations will be translated as IPv4 only.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpicfUsrProfileConfigFilterRuleTable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2
A table that contains configuration objects for filter lists.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileConfigFilterRuleEntry

hpicfUsrProfileConfigFilterRuleEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1
The configuration information for a user's filtering profile.
OBJECT-TYPE    
  HpicfUsrProfileConfigFilterRuleEntry  

hpicfUsrProfileFilterRuleListIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.1
The identifier used to select a list of filter rules. This filter rule list index must correspond to a created but not active filter list index in order for a rule entry to be created.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileFilterRuleIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.2
A numeric value assigned to each rule within a list belong to the same hpicfUsrProfileFilterListIndex. Rules within a given list will be evaluated in ascending order.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileConfigFilterRule 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.3
Specifies a single filter rule using the same syntax used for the hp-nas-filter-rule RADIUS attribute.
OBJECT-TYPE    
  STRING Size(0..80)  

hpicfUsrProfileConfigFilterRuleRowStatus 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.4
This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry. However, if an hpicfUsrProfileConfigFilterListRowStatus is set to destroy, all HpicfUsrProfileConfigFilterRuleEntry entries sharing the common hpicfUsrProfileFilterListIndex will also be destroyed regardless of the value of hpicfUsrProfileConfigFilterRuleRowStatus.
OBJECT-TYPE    
  RowStatus  

hpicfUsrProfileConfigTable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3
A table that contains configuration objects for access profiles.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileConfigEntry

hpicfUsrProfileConfigEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1
The configuration information for an access profile.
OBJECT-TYPE    
  HpicfUsrProfileConfigEntry  

hpicfUsrProfileConfigIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.1
A unique numeric value assigned to each access profile in this table.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileConfigPvid 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.2
Specifies the port VID (PVID), also known, as native VLAN to be used with this access profile. To specify no pvid, set value to 4095, not 0.
OBJECT-TYPE    
  VlanIndex  

hpicfUsrProfileConfigPvidEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.3
Setting this attribute TRUE enables the usage of 'hpicfUsrProfilePvid' when this access profile is active.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigTaggedEgressVlanMap1k 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.4
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 0 through 1023. The first octet corresponds to VLANs with 'VlanIndex' values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. Bit 0 in the 1K map is ignored/discarded. If variable hpicfUsrProfileConfigPvidEnable is TRUE, some bit other than bit 0 in the 1K map must be set. To specify an empty tagged vlan map, vlanIndex value 4095 in the 4K map must be set. Setting a bit to '1' specifies the usage the corresponding VLAN with this access profile.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileConfigTaggedEgressVlanMap2k 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.5
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 1024 through 2047. The first octet corresponds to VLANs with 'VlanIndex' values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. Setting a bit to '1' specifies the usage the corresponding VLAN with this access profile.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileConfigTaggedEgressVlanMap3k 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.6
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 2048 through 3071. The first octet corresponds to VLANs with 'VlanIndex' values of 2048 through 3071, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. Setting a bit to '1' specifies the usage the corresponding VLAN with this access profile.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileConfigTaggedEgressVlanMap4k 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.7
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 3072 through 4095. The first octet corresponds to VLANs with 'VlanIndex' values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. Setting a bit to '1' specifies the usage the corresponding VLAN with this access profile.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileConfigTaggedEgressVlanEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.8
Setting this attribute TRUE enables the usage of 'hpicfUsrProfileTaggedVlanMapXXX' when this access profile is being enforced.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigIngressVlanFilterEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.9
Setting this attribute TRUE causes the system to only allow ingress traffic from those VLANs on which egress traffic is permitted.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigPriorityRegenTable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.10
Specifies the IEEE 802 priority regeneration table for this access profile. Syntax of octet string is same as for 'User-Priority-Table' RADIUS attribute as defined in RFC4675.
OBJECT-TYPE    
  STRING Size(8)  

hpicfUsrProfileConfigPriorityRegenTableEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.11
Setting this attribute TRUE enables the usage of the 'hpicfUsrProfilePriorityRegenTable' when this access profile is active.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigMaxIngressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.12
Specifies the maximum ingress bandwidth for this access profile. Bandwidth value is specified in Kbps.
OBJECT-TYPE    
  Unsigned32  

hpicfUsrProfileConfigMaxIngressBandwidthEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.13
Setting this attribute TRUE enables the usage of the 'hpicfUsrProfileMaxIngressBandwidth' when this access profile is active.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigMaxEgressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.14
Specifies the maximum egress bandwidth for this access profile. Bandwidth value is specified in Kbps.
OBJECT-TYPE    
  Unsigned32  

hpicfUsrProfileConfigMaxEgressBandwidthEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.15
Setting this attribute TRUE enables the usage of 'hpicfUsrProfileMaxEgressBandwidth' when this access profile is active.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigFilterListIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.16
Selects the filter from 'hpicfUsrProfileConfigFilterTable' to associate with this access profile. The rowStatus of the filter must be in an active state.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileConfigFilterListEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.17
Setting this attribute TRUE enables the usage of 'hpicfUsrProfileConfigFilterListIndex' when this access profile is active.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileConfigEntryRowStatus 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.18
This object indicates the status of this entry. Must NOT be active in order to change some other column of this config entry.
OBJECT-TYPE    
  RowStatus  

hpicfUsrProfileConfigBindTable 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4
A table that contains configuration objects for the access profile-to-user bindings.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileConfigBindEntry

hpicfUsrProfileConfigBindEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1
The configuration information for a access profile-to-user binding.
OBJECT-TYPE    
  HpicfUsrProfileConfigBindEntry  

hpicfUsrProfileUserPortNumber 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.1
The interface index associated with this user. On wired HP products, the interface index is the physical port. On wireless products it is the instance (whether real or virtual) of an AP.
OBJECT-TYPE    
  InterfaceIndex  

hpicfUsrProfileUserMacAddr 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.2
The 48-bit IEEE media access control address of the user.
OBJECT-TYPE    
  MacAddress  

hpicfUsrProfileSelector 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.3
Setting this attribute to a value between 1 and 16384 selects an access profile from 'hpicfUsrProfileConfigTable' to apply to the user.
OBJECT-TYPE    
  Integer32 1..16384  

hpicfUsrProfileConfigBindEntryRowStatus 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.4
This object indicates the status of this entry. Must NOT be active in order to change some other column of this bind entry.
OBJECT-TYPE    
  RowStatus  

hpicfUsrProfileConfigConflictResolveQoS 1.3.6.1.4.1.11.2.14.11.1.12.1.1.5
This object controls how a device behaves when QoS conflicts arise. A conflict can arise if a device only supports the QoS access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user unique QoS setting. This object specifies two alternatives, as follows: 'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the QoS settings specified in the last profile applied to the port. 'strict' - Device does signal an error when an attempt to apply an access profile to a port that already has an active access profile with a different QoS setting. Device will not activate the access profile in question after error is signaled.
OBJECT-TYPE    
  INTEGER non-strict(0), strict(1)  

hpicfUsrProfileConfigConflictResolveMaxIngressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.1.6
This object controls how a device behaves when ingress BW conflicts arise. A conflict can arise if a device only supports the ingress BW access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user unique ingress BW setting. This object specifies two alternatives, as follows: 'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the ingress BW settings specified in the last profile applied to the port. 'strict' - Device does signal an error when an attempt to apply an access profile to a port that already has an active access profile with a different ingress BW setting. Device will not activate the access profile in question after error is signaled.
OBJECT-TYPE    
  INTEGER non-strict(0), strict(1)  

hpicfUsrProfileConfigConflictResolveMaxEgressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.1.7
This object controls how a device behaves when egress BW conflicts arise. A conflict can arise if a device only supports the egress BW access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user egress BW setting. This object specifies two alternatives, as follows: 'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the egress BW settings specified in the last profile applied to the port. 'strict' - Device does signal an error when an attempt to apply an access profile to a port that already has an active access profile with a different egress BW setting. Device will not activate the access profile in question after error is signaled.
OBJECT-TYPE    
  INTEGER non-strict(0), strict(1)  

hpicfUsrProfileLastUpdate 1.3.6.1.4.1.11.2.14.11.1.12.1.2.1
A snapshot of the module sysUpTime at the time of the last update to the access profiles in effect. A value of 0 indicates that the hpicfUsrProfileLastUpdate object is not supported by the device and a fresh copy of the hpicfUsrProfileTable will always need to be obtained by the management application.
OBJECT-TYPE    
  TimeTicks  

hpicfUsrProfileStatsFilterTable 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2
A table that contains statistic objects for filter lists.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileStatsFilterEntry

hpicfUsrProfileStatsFilterEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1
Statistic information for a user's filtering profile.
OBJECT-TYPE    
  HpicfUsrProfileStatsFilterEntry  

hpicfUsrProfileStatsFilterRule 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.1
Specifies a single filter rule using the same syntax used for the hp-nas-filter-rule RADIUS attribute.
OBJECT-TYPE    
  STRING Size(0..80)  

hpicfUsrProfileStatsFilterRuleHitCount 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.2
Specifies the number of times (hit count) the user's traffic has matched this rule.
OBJECT-TYPE    
  Counter64  

hpicfUsrProfileStatsFilterRuleHitCountEnabled 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.3
When this attribute is TRUE it signifies the 'hpicfUsrProfileStatsFilterRuleHitCount' contains a valid value. A FALSE value signifies it does not contain a valid value.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileStatsTable 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3
This table describes the access profiles currently in effect.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfUsrProfileStatsEntry

hpicfUsrProfileStatsEntry 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1
An entry in the user access profile table.
OBJECT-TYPE    
  HpicfUsrProfileStatsEntry  

hpicfUsrProfileStatsPvid 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.1
Active port VID (PVID) for this user.
OBJECT-TYPE    
  VlanIndex  

hpicfUsrProfileStatsTaggedEgressVlanMap1k 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.2
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 0 through 1023. The first octet corresponds to VLANs with 'VlanIndex' values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. When a bit is set to '1', it means the corresponding tagged VLAN as active for this user.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileStatsTaggedEgressVlanMap2k 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 1024 through 2047. The first octet corresponds to VLANs with 'VlanIndex' values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. When a bit is set to '1', it indicates the corresponding tagged VLAN as active for this user.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileStatsTaggedEgressVlanMap3k 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.4
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 2048 through 3071. The first octet corresponds to VLANs with 'VlanIndex' values of 2048 through 2055, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. When a bit is set to '1', it indicates the corresponding tagged VLAN as active for this user.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileStatsTaggedEgressVlanMap4k 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.5
A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 3072 through 4095. The first octet corresponds to VLANs with 'VlanIndex' values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest 'VlanIndex' value in that octet. When a bit is set to '1', it indicates the corresponding tagged VLAN as active for this user.
OBJECT-TYPE    
  STRING Size(0..128)  

hpicfUsrProfileStatsIngressVlanFilterEnable 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.6
When this attribute is TRUE causes the system is only allowing ingress traffic from those VLANs on which egress traffic is permitted.
OBJECT-TYPE    
  TruthValue  

hpicfUsrProfileStatsPriorityRegenTable 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.7
Specifies the IEEE 802 priority regeneration table active for this access profile. Syntax of octet string is same as for 'User-Priority-Table' RADIUS attribute as defined in RFC4675.
OBJECT-TYPE    
  STRING Size(8)  

hpicfUsrProfileStatsMaxIngressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.8
Specifies the maximum ingress bandwidth for this access profile. Bandwidth value is specified in Kbps.
OBJECT-TYPE    
  Unsigned32  

hpicfUsrProfileStatsMaxEgressBandwidth 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9
Specifies the maximum egress bandwidth for this access profile. Bandwidth value is specified in Kbps.
OBJECT-TYPE    
  Unsigned32  

hpicfUsrProfileStatsFilterListIndex 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.10
A value of 0 indicates that no filter rule set is active for the user. A value between 1 and 16384 selects the active filter rule set from 'hpicfUsrProfileStatsFilterTable'.
OBJECT-TYPE    
  Integer32 0..16384  

hpicfUsrProfileStatsAccessMode 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.11
Indicates whether profile was applied via SNMP or via RADIUS. Application by SNMP has precedence over RADIUS. Where there are no attribute conflicts, profile attributes may be a combination of those applied by both SNMP and RADIUS. In such case, the variable value will still be SNMP.
OBJECT-TYPE    
  INTEGER snmp(1), dot8021x(2), webauth(3), macauth(4), webmacauth(5)  

hpicfUsrProfileGroup 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1
OBJECT IDENTIFIER    

hpicfUsrProfileCompliances 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2
OBJECT IDENTIFIER    

hpicfUsrProfileCapabilityGroup 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.1
A collection of objects providing device capability information for user access profiles.
OBJECT-GROUP    

hpicfUsrProfileConfigGroup 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.2
A collection of objects providing configuration of user access profiles.
OBJECT-GROUP    

hpicfUsrProfileStatsGroup 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.3
A collection of objects providing statistics of user access profiles.
OBJECT-GROUP    

hpicfUsrProfileConfigGroup2 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.4
A collection of objects providing configuration of user access profiles.
OBJECT-GROUP    

hpicfUsrProfileCompliance 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.1
The compliance statement for devices support of HP-USER-PROFILE-MIB.
MODULE-COMPLIANCE    

hpicfUsrProfileCompliance2 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.2
The compliance statement for devices support of HP-USER-PROFILE-MIB.
MODULE-COMPLIANCE